steve/pluggable-terminal-header

PCB header for pluggable terminal blocks, right-angle: Phoenix Contact MSTBA 2,5 (5.0, 5.08 mm) and MC 1,5 (3.81 mm) types, 2 to 16 positions.

v1.1.0 STEVE MIT 0

Open in STEVE

Isometric

Parameters

Preset46 sizes

Series2 options

Pitch

3.815.05.08

MSTBA 2,5: 5.0 or 5.08. MC 1,5: 3.81.

Positions2–16

Detail

fullsimple

full: opening, mating pins and solder pins. simple: the housing's outline.

Defaults built

part.py 53 lines · Python · STEVE runtime · checked

Download

"""PCB header for pluggable terminal blocks, right-angle, Phoenix Contact MSTBA 2,5 type (5.0 or 5.08 mm, 2 to 16 positions) or MC 1,5 type (3.81 mm, 2 to 16). Pin 1 is at the origin, the row

along +X, the housing on the XY plane with its opening facing -Y, the solder pins down through the board. Dimensions from Phoenix Contact's data sheet in the README."""

from steve import Model

series = "MSTBA 2,5" # Series

pitch = 5.08 # mm Pitch

positions = 2 # Positions

detail = "full" # full: the opening, the mating pins and the solder pins; simple: the housing's outline

# series: (pitches, length, height above the board, solder pin length, solder pins from the back face, past each end pin by pitch, pin section)

# MSTBA 2,5: data sheet MSTBA 2,5/ 2-G-5,08 (1757242), Dimensions p. 5 and Dimensional drawing p. 6: width a + 7 (5.0 mm) or a + 7.08 (5.08 mm), length 12,

# height 8.6 above the board, solder pins 3.5 long, 2 from the back face. The drawing gives the same housing for 5.0 and 5.08 mm pitch.

# MC 1,5: data sheet MC 1,5/ 2-G-3,81 (1803277), Technische Daten p. 1 and Massszeichnung p. 4: width a + 5.2, length 9.2, height 7.25, solder pins 3.4 long,

# 0.8 x 0.8, 8 from the opening (1.2 from the back face).

SERIES = {

"MSTBA 2,5": ((5.0, 5.08), 12, 8.6, 3.5, 2, {5.0: 3.5, 5.08: 3.54}, 1.2),

"MC 1,5": ((3.81,), 9.2, 7.25, 3.4, 1.2, {3.81: 2.6}, 0.8),

}

pitches, LENGTH, HEIGHT, PIN_LENGTH, PIN_FROM_BACK, ENDS, PIN = SERIES[series]

# the wall and the mating pins' reach are proportions, for looks: the data sheets don't dimension them

SHORT = 1.5 # the mating pins stop this far short of the opening, where the plug's contacts meet them

WALL = 1.0 if series == "MSTBA 2,5" else 0.8

if pitch not in pitches or not 2 <= positions <= 16:

raise ValueError(f"{series} comes in pitch {pitches}, 2 to 16 positions.")

end = ENDS[pitch]

width = (positions - 1) * pitch + 2 * end

x0 = -end

back = PIN_FROM_BACK

front = back - LENGTH

model = Model()

with model.sketch("housing_sketch", on="XY", name="Housing") as sk:

sk.rect("housing_rect", (x0, front), (x0 + width, back))

model.extrude("housing", "housing_sketch", distance=HEIGHT, name="Housing")

if detail == "full":

model.plane("opening_plane", on="XZ", offset=-front, name="Opening")

with model.sketch("opening_sketch", on="opening_plane", name="Opening") as sk:

sk.rect("opening_rect", (x0 + WALL, WALL), (x0 + width - WALL, HEIGHT - WALL))

model.extrude("opening", "opening_sketch", distance=-(LENGTH - 2 * WALL), op="cut", name="Opening")

z = HEIGHT / 2

model.plane("pins_plane", on="XZ", offset=-(back - WALL), name="Mating pins")

with model.sketch("pins_sketch", on="pins_plane", name="Mating pins") as sk:

for i in range(positions):

sk.rect(f"pin_{i}", (i * pitch - PIN / 2, z - PIN / 2), (i * pitch + PIN / 2, z + PIN / 2))

model.extrude("pins", "pins_sketch", distance=LENGTH - WALL - SHORT, name="Mating pins")

model.plane("solder_plane", on="XY", offset=-PIN_LENGTH, name="Solder pins")

with model.sketch("solder_sketch", on="solder_plane", name="Solder pins") as sk:

for i in range(positions):

sk.rect(f"solder_{i}", (i * pitch - PIN / 2, -PIN / 2), (i * pitch + PIN / 2, PIN / 2))

model.extrude("solder", "solder_sketch", distance=PIN_LENGTH + 1, name="Solder pins")

model.material("pa6", color="#2f7d4a")

result = model.result()

"""PCB header for pluggable terminal blocks, right-angle, Phoenix Contact MSTBA 2,5 type (5.0 or 5.08 mm, 2 to 16 positions) or MC 1,5 type (3.81 mm, 2 to 16). Pin 1 is at the origin, the row
along +X, the housing on the XY plane with its opening facing -Y, the solder pins down through the board. Dimensions from Phoenix Contact's data sheet in the README."""
from steve import Model

series = "MSTBA 2,5"  # Series
pitch = 5.08  # mm Pitch
positions = 2  # Positions
detail = "full"  # full: the opening, the mating pins and the solder pins; simple: the housing's outline

# series: (pitches, length, height above the board, solder pin length, solder pins from the back face, past each end pin by pitch, pin section)
# MSTBA 2,5: data sheet MSTBA 2,5/ 2-G-5,08 (1757242), Dimensions p. 5 and Dimensional drawing p. 6: width a + 7 (5.0 mm) or a + 7.08 (5.08 mm), length 12,
# height 8.6 above the board, solder pins 3.5 long, 2 from the back face. The drawing gives the same housing for 5.0 and 5.08 mm pitch.
# MC 1,5: data sheet MC 1,5/ 2-G-3,81 (1803277), Technische Daten p. 1 and Massszeichnung p. 4: width a + 5.2, length 9.2, height 7.25, solder pins 3.4 long,
# 0.8 x 0.8, 8 from the opening (1.2 from the back face).
SERIES = {
    "MSTBA 2,5": ((5.0, 5.08), 12, 8.6, 3.5, 2, {5.0: 3.5, 5.08: 3.54}, 1.2),
    "MC 1,5": ((3.81,), 9.2, 7.25, 3.4, 1.2, {3.81: 2.6}, 0.8),
}
pitches, LENGTH, HEIGHT, PIN_LENGTH, PIN_FROM_BACK, ENDS, PIN = SERIES[series]
# the wall and the mating pins' reach are proportions, for looks: the data sheets don't dimension them
SHORT = 1.5   # the mating pins stop this far short of the opening, where the plug's contacts meet them
WALL = 1.0 if series == "MSTBA 2,5" else 0.8
if pitch not in pitches or not 2 <= positions <= 16:
    raise ValueError(f"{series} comes in pitch {pitches}, 2 to 16 positions.")

end = ENDS[pitch]
width = (positions - 1) * pitch + 2 * end
x0 = -end
back = PIN_FROM_BACK
front = back - LENGTH
model = Model()
with model.sketch("housing_sketch", on="XY", name="Housing") as sk:
    sk.rect("housing_rect", (x0, front), (x0 + width, back))
model.extrude("housing", "housing_sketch", distance=HEIGHT, name="Housing")
if detail == "full":
    model.plane("opening_plane", on="XZ", offset=-front, name="Opening")
    with model.sketch("opening_sketch", on="opening_plane", name="Opening") as sk:
        sk.rect("opening_rect", (x0 + WALL, WALL), (x0 + width - WALL, HEIGHT - WALL))
    model.extrude("opening", "opening_sketch", distance=-(LENGTH - 2 * WALL), op="cut", name="Opening")
    z = HEIGHT / 2
    model.plane("pins_plane", on="XZ", offset=-(back - WALL), name="Mating pins")
    with model.sketch("pins_sketch", on="pins_plane", name="Mating pins") as sk:
        for i in range(positions):
            sk.rect(f"pin_{i}", (i * pitch - PIN / 2, z - PIN / 2), (i * pitch + PIN / 2, z + PIN / 2))
    model.extrude("pins", "pins_sketch", distance=LENGTH - WALL - SHORT, name="Mating pins")
    model.plane("solder_plane", on="XY", offset=-PIN_LENGTH, name="Solder pins")
    with model.sketch("solder_sketch", on="solder_plane", name="Solder pins") as sk:
        for i in range(positions):
            sk.rect(f"solder_{i}", (i * pitch - PIN / 2, -PIN / 2), (i * pitch + PIN / 2, PIN / 2))
    model.extrude("solder", "solder_sketch", distance=PIN_LENGTH + 1, name="Solder pins")
model.material("pa6", color="#2f7d4a")
result = model.result()

pypart.toml 37 lines · TOML

Download

name = "steve/pluggable-terminal-header"

version = "1.1.0"

runtime = "steve"

license = "MIT"

summary = "PCB header for pluggable terminal blocks, right-angle: Phoenix Contact MSTBA 2,5 (5.0, 5.08 mm) and MC 1,5 (3.81 mm) types, 2 to 16 positions."

changes = "MC 1,5 headers at 3.81 mm. MSTBA 2,5 parts are unchanged."

description = """Right-angle PCB header of the MSTBA 2,5 or MC 1,5 type, with its opening, mating pins and solder pins. Width, length, height and pins from Phoenix Contact's data sheets. See the README."""

tags = ["terminal-block", "pluggable", "header", "phoenix", "mstb", "connector", "electronics"]

[parameters.series]

type = "choice"

default = "MSTBA 2,5"

choices = ["MSTBA 2,5", "MC 1,5"]

label = "Series"

[parameters.pitch]

type = "choice"

default = 5.08

choices = [3.81, 5.0, 5.08]

description = "MSTBA 2,5: 5.0 or 5.08. MC 1,5: 3.81."

unit = "mm"

label = "Pitch"

[parameters.positions]

type = "integer"

default = 2

min = 2

max = 16

label = "Positions"

[parameters.detail]

type = "choice"

default = "full"

choices = ["full", "simple"]

label = "Detail"

description = "full: opening, mating pins and solder pins. simple: the housing's outline."

name = "steve/pluggable-terminal-header"
version = "1.1.0"
runtime = "steve"
license = "MIT"
summary = "PCB header for pluggable terminal blocks, right-angle: Phoenix Contact MSTBA 2,5 (5.0, 5.08 mm) and MC 1,5 (3.81 mm) types, 2 to 16 positions."
changes = "MC 1,5 headers at 3.81 mm. MSTBA 2,5 parts are unchanged."
description = """Right-angle PCB header of the MSTBA 2,5 or MC 1,5 type, with its opening, mating pins and solder pins. Width, length, height and pins from Phoenix Contact's data sheets. See the README."""
tags = ["terminal-block", "pluggable", "header", "phoenix", "mstb", "connector", "electronics"]

[parameters.series]
type = "choice"
default = "MSTBA 2,5"
choices = ["MSTBA 2,5", "MC 1,5"]
label = "Series"

[parameters.pitch]
type = "choice"
default = 5.08
choices = [3.81, 5.0, 5.08]
description = "MSTBA 2,5: 5.0 or 5.08. MC 1,5: 3.81."
unit = "mm"
label = "Pitch"

[parameters.positions]
type = "integer"
default = 2
min = 2
max = 16
label = "Positions"

[parameters.detail]
type = "choice"
default = "full"
choices = ["full", "simple"]
label = "Detail"
description = "full: opening, mating pins and solder pins. simple: the housing's outline."

presets.toml 324 lines · TOML

Download

# Presets of this part (factory/PRESETS.md). Written by factory/gen.py.

[[presets]]

id = "MC1.5-2-G-3.81"

title = "Pluggable terminal header, 2 positions, 3.81 mm, right-angle (MC 1,5)"

params = { series = "MC 1,5", pitch = 3.81, positions = 2 }

aliases = ["MC 1,5/2-G-3,81", "MC 1,5/2-G", "2 pin pluggable terminal header 3.81", "2 way pluggable terminal block 3.81mm", "2P pluggable header 3.81"]

standard = "Phoenix Contact"

[[presets]]

id = "MC1.5-3-G-3.81"

title = "Pluggable terminal header, 3 positions, 3.81 mm, right-angle (MC 1,5)"

params = { series = "MC 1,5", pitch = 3.81, positions = 3 }

aliases = ["MC 1,5/3-G-3,81", "MC 1,5/3-G", "3 pin pluggable terminal header 3.81", "3 way pluggable terminal block 3.81mm", "3P pluggable header 3.81"]

standard = "Phoenix Contact"

[[presets]]

id = "MC1.5-4-G-3.81"

title = "Pluggable terminal header, 4 positions, 3.81 mm, right-angle (MC 1,5)"

params = { series = "MC 1,5", pitch = 3.81, positions = 4 }

aliases = ["MC 1,5/4-G-3,81", "MC 1,5/4-G", "4 pin pluggable terminal header 3.81", "4 way pluggable terminal block 3.81mm", "4P pluggable header 3.81"]

standard = "Phoenix Contact"

[[presets]]

id = "MC1.5-5-G-3.81"

title = "Pluggable terminal header, 5 positions, 3.81 mm, right-angle (MC 1,5)"

params = { series = "MC 1,5", pitch = 3.81, positions = 5 }

aliases = ["MC 1,5/5-G-3,81", "MC 1,5/5-G", "5 pin pluggable terminal header 3.81", "5 way pluggable terminal block 3.81mm", "5P pluggable header 3.81"]

standard = "Phoenix Contact"

[[presets]]

id = "MC1.5-6-G-3.81"

title = "Pluggable terminal header, 6 positions, 3.81 mm, right-angle (MC 1,5)"

params = { series = "MC 1,5", pitch = 3.81, positions = 6 }

aliases = ["MC 1,5/6-G-3,81", "MC 1,5/6-G", "6 pin pluggable terminal header 3.81", "6 way pluggable terminal block 3.81mm", "6P pluggable header 3.81"]

standard = "Phoenix Contact"

[[presets]]

id = "MC1.5-7-G-3.81"

title = "Pluggable terminal header, 7 positions, 3.81 mm, right-angle (MC 1,5)"

params = { series = "MC 1,5", pitch = 3.81, positions = 7 }

aliases = ["MC 1,5/7-G-3,81", "MC 1,5/7-G", "7 pin pluggable terminal header 3.81", "7 way pluggable terminal block 3.81mm", "7P pluggable header 3.81"]

standard = "Phoenix Contact"

[[presets]]

id = "MC1.5-8-G-3.81"

title = "Pluggable terminal header, 8 positions, 3.81 mm, right-angle (MC 1,5)"

params = { series = "MC 1,5", pitch = 3.81, positions = 8 }

aliases = ["MC 1,5/8-G-3,81", "MC 1,5/8-G", "8 pin pluggable terminal header 3.81", "8 way pluggable terminal block 3.81mm", "8P pluggable header 3.81"]

standard = "Phoenix Contact"

[[presets]]

id = "MC1.5-9-G-3.81"

title = "Pluggable terminal header, 9 positions, 3.81 mm, right-angle (MC 1,5)"

params = { series = "MC 1,5", pitch = 3.81, positions = 9 }

aliases = ["MC 1,5/9-G-3,81", "MC 1,5/9-G", "9 pin pluggable terminal header 3.81", "9 way pluggable terminal block 3.81mm", "9P pluggable header 3.81"]

standard = "Phoenix Contact"

[[presets]]

id = "MC1.5-10-G-3.81"

title = "Pluggable terminal header, 10 positions, 3.81 mm, right-angle (MC 1,5)"

params = { series = "MC 1,5", pitch = 3.81, positions = 10 }

aliases = ["MC 1,5/10-G-3,81", "MC 1,5/10-G", "10 pin pluggable terminal header 3.81", "10 way pluggable terminal block 3.81mm", "10P pluggable header 3.81"]

standard = "Phoenix Contact"

[[presets]]

id = "MC1.5-11-G-3.81"

title = "Pluggable terminal header, 11 positions, 3.81 mm, right-angle (MC 1,5)"

params = { series = "MC 1,5", pitch = 3.81, positions = 11 }

aliases = ["MC 1,5/11-G-3,81", "MC 1,5/11-G", "11 pin pluggable terminal header 3.81", "11 way pluggable terminal block 3.81mm", "11P pluggable header 3.81"]

standard = "Phoenix Contact"

[[presets]]

id = "MC1.5-12-G-3.81"

title = "Pluggable terminal header, 12 positions, 3.81 mm, right-angle (MC 1,5)"

params = { series = "MC 1,5", pitch = 3.81, positions = 12 }

aliases = ["MC 1,5/12-G-3,81", "MC 1,5/12-G", "12 pin pluggable terminal header 3.81", "12 way pluggable terminal block 3.81mm", "12P pluggable header 3.81"]

standard = "Phoenix Contact"

[[presets]]

id = "MC1.5-13-G-3.81"

title = "Pluggable terminal header, 13 positions, 3.81 mm, right-angle (MC 1,5)"

params = { series = "MC 1,5", pitch = 3.81, positions = 13 }

aliases = ["MC 1,5/13-G-3,81", "MC 1,5/13-G", "13 pin pluggable terminal header 3.81", "13 way pluggable terminal block 3.81mm", "13P pluggable header 3.81"]

standard = "Phoenix Contact"

[[presets]]

id = "MC1.5-14-G-3.81"

title = "Pluggable terminal header, 14 positions, 3.81 mm, right-angle (MC 1,5)"

params = { series = "MC 1,5", pitch = 3.81, positions = 14 }

aliases = ["MC 1,5/14-G-3,81", "MC 1,5/14-G", "14 pin pluggable terminal header 3.81", "14 way pluggable terminal block 3.81mm", "14P pluggable header 3.81"]

standard = "Phoenix Contact"

[[presets]]

id = "MC1.5-15-G-3.81"

title = "Pluggable terminal header, 15 positions, 3.81 mm, right-angle (MC 1,5)"

params = { series = "MC 1,5", pitch = 3.81, positions = 15 }

aliases = ["MC 1,5/15-G-3,81", "MC 1,5/15-G", "15 pin pluggable terminal header 3.81", "15 way pluggable terminal block 3.81mm", "15P pluggable header 3.81"]

standard = "Phoenix Contact"

100

101

[[presets]]

102

id = "MC1.5-16-G-3.81"

103

title = "Pluggable terminal header, 16 positions, 3.81 mm, right-angle (MC 1,5)"

104

params = { series = "MC 1,5", pitch = 3.81, positions = 16 }

105

aliases = ["MC 1,5/16-G-3,81", "MC 1,5/16-G", "16 pin pluggable terminal header 3.81", "16 way pluggable terminal block 3.81mm", "16P pluggable header 3.81"]

106

standard = "Phoenix Contact"

107

108

[[presets]]

109

id = "MSTBA2.5-2-G-5.0"

110

title = "Pluggable terminal header, 2 positions, 5.0 mm, right-angle (MSTBA 2,5)"

111

params = { series = "MSTBA 2,5", pitch = 5, positions = 2 }

112

aliases = ["MSTBA 2,5/2-G-5,0", "MSTBA 2,5/2-G", "2 pin pluggable terminal header 5.0", "2 way pluggable terminal block 5.0mm", "2P pluggable header 5.0"]

113

standard = "Phoenix Contact"

114

115

[[presets]]

116

id = "MSTBA2.5-3-G-5.0"

117

title = "Pluggable terminal header, 3 positions, 5.0 mm, right-angle (MSTBA 2,5)"

118

params = { series = "MSTBA 2,5", pitch = 5, positions = 3 }

119

aliases = ["MSTBA 2,5/3-G-5,0", "MSTBA 2,5/3-G", "3 pin pluggable terminal header 5.0", "3 way pluggable terminal block 5.0mm", "3P pluggable header 5.0"]

120

standard = "Phoenix Contact"

121

122

[[presets]]

123

id = "MSTBA2.5-4-G-5.0"

124

title = "Pluggable terminal header, 4 positions, 5.0 mm, right-angle (MSTBA 2,5)"

125

params = { series = "MSTBA 2,5", pitch = 5, positions = 4 }

126

aliases = ["MSTBA 2,5/4-G-5,0", "MSTBA 2,5/4-G", "4 pin pluggable terminal header 5.0", "4 way pluggable terminal block 5.0mm", "4P pluggable header 5.0"]

127

standard = "Phoenix Contact"

128

129

[[presets]]

130

id = "MSTBA2.5-5-G-5.0"

131

title = "Pluggable terminal header, 5 positions, 5.0 mm, right-angle (MSTBA 2,5)"

132

params = { series = "MSTBA 2,5", pitch = 5, positions = 5 }

133

aliases = ["MSTBA 2,5/5-G-5,0", "MSTBA 2,5/5-G", "5 pin pluggable terminal header 5.0", "5 way pluggable terminal block 5.0mm", "5P pluggable header 5.0"]

134

standard = "Phoenix Contact"

135

136

[[presets]]

137

id = "MSTBA2.5-6-G-5.0"

138

title = "Pluggable terminal header, 6 positions, 5.0 mm, right-angle (MSTBA 2,5)"

139

params = { series = "MSTBA 2,5", pitch = 5, positions = 6 }

140

aliases = ["MSTBA 2,5/6-G-5,0", "MSTBA 2,5/6-G", "6 pin pluggable terminal header 5.0", "6 way pluggable terminal block 5.0mm", "6P pluggable header 5.0"]

141

standard = "Phoenix Contact"

142

143

[[presets]]

144

id = "MSTBA2.5-7-G-5.0"

145

title = "Pluggable terminal header, 7 positions, 5.0 mm, right-angle (MSTBA 2,5)"

146

params = { series = "MSTBA 2,5", pitch = 5, positions = 7 }

147

aliases = ["MSTBA 2,5/7-G-5,0", "MSTBA 2,5/7-G", "7 pin pluggable terminal header 5.0", "7 way pluggable terminal block 5.0mm", "7P pluggable header 5.0"]

148

standard = "Phoenix Contact"

149

150

[[presets]]

151

id = "MSTBA2.5-8-G-5.0"

152

title = "Pluggable terminal header, 8 positions, 5.0 mm, right-angle (MSTBA 2,5)"

153

params = { series = "MSTBA 2,5", pitch = 5, positions = 8 }

154

aliases = ["MSTBA 2,5/8-G-5,0", "MSTBA 2,5/8-G", "8 pin pluggable terminal header 5.0", "8 way pluggable terminal block 5.0mm", "8P pluggable header 5.0"]

155

standard = "Phoenix Contact"

156

157

[[presets]]

158

id = "MSTBA2.5-9-G-5.0"

159

title = "Pluggable terminal header, 9 positions, 5.0 mm, right-angle (MSTBA 2,5)"

160

params = { series = "MSTBA 2,5", pitch = 5, positions = 9 }

161

aliases = ["MSTBA 2,5/9-G-5,0", "MSTBA 2,5/9-G", "9 pin pluggable terminal header 5.0", "9 way pluggable terminal block 5.0mm", "9P pluggable header 5.0"]

162

standard = "Phoenix Contact"

163

164

[[presets]]

165

id = "MSTBA2.5-10-G-5.0"

166

title = "Pluggable terminal header, 10 positions, 5.0 mm, right-angle (MSTBA 2,5)"

167

params = { series = "MSTBA 2,5", pitch = 5, positions = 10 }

168

aliases = ["MSTBA 2,5/10-G-5,0", "MSTBA 2,5/10-G", "10 pin pluggable terminal header 5.0", "10 way pluggable terminal block 5.0mm", "10P pluggable header 5.0"]

169

standard = "Phoenix Contact"

170

171

[[presets]]

172

id = "MSTBA2.5-11-G-5.0"

173

title = "Pluggable terminal header, 11 positions, 5.0 mm, right-angle (MSTBA 2,5)"

174

params = { series = "MSTBA 2,5", pitch = 5, positions = 11 }

175

aliases = ["MSTBA 2,5/11-G-5,0", "MSTBA 2,5/11-G", "11 pin pluggable terminal header 5.0", "11 way pluggable terminal block 5.0mm", "11P pluggable header 5.0"]

176

standard = "Phoenix Contact"

177

178

[[presets]]

179

id = "MSTBA2.5-12-G-5.0"

180

title = "Pluggable terminal header, 12 positions, 5.0 mm, right-angle (MSTBA 2,5)"

181

params = { series = "MSTBA 2,5", pitch = 5, positions = 12 }

182

aliases = ["MSTBA 2,5/12-G-5,0", "MSTBA 2,5/12-G", "12 pin pluggable terminal header 5.0", "12 way pluggable terminal block 5.0mm", "12P pluggable header 5.0"]

183

standard = "Phoenix Contact"

184

185

[[presets]]

186

id = "MSTBA2.5-13-G-5.0"

187

title = "Pluggable terminal header, 13 positions, 5.0 mm, right-angle (MSTBA 2,5)"

188

params = { series = "MSTBA 2,5", pitch = 5, positions = 13 }

189

aliases = ["MSTBA 2,5/13-G-5,0", "MSTBA 2,5/13-G", "13 pin pluggable terminal header 5.0", "13 way pluggable terminal block 5.0mm", "13P pluggable header 5.0"]

190

standard = "Phoenix Contact"

191

192

[[presets]]

193

id = "MSTBA2.5-14-G-5.0"

194

title = "Pluggable terminal header, 14 positions, 5.0 mm, right-angle (MSTBA 2,5)"

195

params = { series = "MSTBA 2,5", pitch = 5, positions = 14 }

196

aliases = ["MSTBA 2,5/14-G-5,0", "MSTBA 2,5/14-G", "14 pin pluggable terminal header 5.0", "14 way pluggable terminal block 5.0mm", "14P pluggable header 5.0"]

197

standard = "Phoenix Contact"

198

199

[[presets]]

200

id = "MSTBA2.5-15-G-5.0"

201

title = "Pluggable terminal header, 15 positions, 5.0 mm, right-angle (MSTBA 2,5)"

202

params = { series = "MSTBA 2,5", pitch = 5, positions = 15 }

203

aliases = ["MSTBA 2,5/15-G-5,0", "MSTBA 2,5/15-G", "15 pin pluggable terminal header 5.0", "15 way pluggable terminal block 5.0mm", "15P pluggable header 5.0"]

204

standard = "Phoenix Contact"

205

206

[[presets]]

207

id = "MSTBA2.5-16-G-5.0"

208

title = "Pluggable terminal header, 16 positions, 5.0 mm, right-angle (MSTBA 2,5)"

209

params = { series = "MSTBA 2,5", pitch = 5, positions = 16 }

210

aliases = ["MSTBA 2,5/16-G-5,0", "MSTBA 2,5/16-G", "16 pin pluggable terminal header 5.0", "16 way pluggable terminal block 5.0mm", "16P pluggable header 5.0"]

211

standard = "Phoenix Contact"

212

213

[[presets]]

214

id = "MSTBA2.5-2-G-5.08"

215

title = "Pluggable terminal header, 2 positions, 5.08 mm, right-angle (MSTBA 2,5)"

216

params = { series = "MSTBA 2,5", pitch = 5.08, positions = 2 }

217

aliases = ["MSTBA 2,5/2-G-5,08", "MSTBA 2,5/2-G", "2 pin pluggable terminal header 5.08", "2 way pluggable terminal block 5.08mm", "2P pluggable header 5.08"]

218

standard = "Phoenix Contact"

219

220

[[presets]]

221

id = "MSTBA2.5-3-G-5.08"

222

title = "Pluggable terminal header, 3 positions, 5.08 mm, right-angle (MSTBA 2,5)"

223

params = { series = "MSTBA 2,5", pitch = 5.08, positions = 3 }

224

aliases = ["MSTBA 2,5/3-G-5,08", "MSTBA 2,5/3-G", "3 pin pluggable terminal header 5.08", "3 way pluggable terminal block 5.08mm", "3P pluggable header 5.08"]

225

standard = "Phoenix Contact"

226

227

[[presets]]

228

id = "MSTBA2.5-4-G-5.08"

229

title = "Pluggable terminal header, 4 positions, 5.08 mm, right-angle (MSTBA 2,5)"

230

params = { series = "MSTBA 2,5", pitch = 5.08, positions = 4 }

231

aliases = ["MSTBA 2,5/4-G-5,08", "MSTBA 2,5/4-G", "4 pin pluggable terminal header 5.08", "4 way pluggable terminal block 5.08mm", "4P pluggable header 5.08"]

232

standard = "Phoenix Contact"

233

234

[[presets]]

235

id = "MSTBA2.5-5-G-5.08"

236

title = "Pluggable terminal header, 5 positions, 5.08 mm, right-angle (MSTBA 2,5)"

237

params = { series = "MSTBA 2,5", pitch = 5.08, positions = 5 }

238

aliases = ["MSTBA 2,5/5-G-5,08", "MSTBA 2,5/5-G", "5 pin pluggable terminal header 5.08", "5 way pluggable terminal block 5.08mm", "5P pluggable header 5.08"]

239

standard = "Phoenix Contact"

240

241

[[presets]]

242

id = "MSTBA2.5-6-G-5.08"

243

title = "Pluggable terminal header, 6 positions, 5.08 mm, right-angle (MSTBA 2,5)"

244

params = { series = "MSTBA 2,5", pitch = 5.08, positions = 6 }

245

aliases = ["MSTBA 2,5/6-G-5,08", "MSTBA 2,5/6-G", "6 pin pluggable terminal header 5.08", "6 way pluggable terminal block 5.08mm", "6P pluggable header 5.08"]

246

standard = "Phoenix Contact"

247

248

[[presets]]

249

id = "MSTBA2.5-7-G-5.08"

250

title = "Pluggable terminal header, 7 positions, 5.08 mm, right-angle (MSTBA 2,5)"

251

params = { series = "MSTBA 2,5", pitch = 5.08, positions = 7 }

252

aliases = ["MSTBA 2,5/7-G-5,08", "MSTBA 2,5/7-G", "7 pin pluggable terminal header 5.08", "7 way pluggable terminal block 5.08mm", "7P pluggable header 5.08"]

253

standard = "Phoenix Contact"

254

255

[[presets]]

256

id = "MSTBA2.5-8-G-5.08"

257

title = "Pluggable terminal header, 8 positions, 5.08 mm, right-angle (MSTBA 2,5)"

258

params = { series = "MSTBA 2,5", pitch = 5.08, positions = 8 }

259

aliases = ["MSTBA 2,5/8-G-5,08", "MSTBA 2,5/8-G", "8 pin pluggable terminal header 5.08", "8 way pluggable terminal block 5.08mm", "8P pluggable header 5.08"]

260

standard = "Phoenix Contact"

261

262

[[presets]]

263

id = "MSTBA2.5-9-G-5.08"

264

title = "Pluggable terminal header, 9 positions, 5.08 mm, right-angle (MSTBA 2,5)"

265

params = { series = "MSTBA 2,5", pitch = 5.08, positions = 9 }

266

aliases = ["MSTBA 2,5/9-G-5,08", "MSTBA 2,5/9-G", "9 pin pluggable terminal header 5.08", "9 way pluggable terminal block 5.08mm", "9P pluggable header 5.08"]

267

standard = "Phoenix Contact"

268

269

[[presets]]

270

id = "MSTBA2.5-10-G-5.08"

271

title = "Pluggable terminal header, 10 positions, 5.08 mm, right-angle (MSTBA 2,5)"

272

params = { series = "MSTBA 2,5", pitch = 5.08, positions = 10 }

273

aliases = ["MSTBA 2,5/10-G-5,08", "MSTBA 2,5/10-G", "10 pin pluggable terminal header 5.08", "10 way pluggable terminal block 5.08mm", "10P pluggable header 5.08"]

274

standard = "Phoenix Contact"

275

276

[[presets]]

277

id = "MSTBA2.5-11-G-5.08"

278

title = "Pluggable terminal header, 11 positions, 5.08 mm, right-angle (MSTBA 2,5)"

279

params = { series = "MSTBA 2,5", pitch = 5.08, positions = 11 }

280

aliases = ["MSTBA 2,5/11-G-5,08", "MSTBA 2,5/11-G", "11 pin pluggable terminal header 5.08", "11 way pluggable terminal block 5.08mm", "11P pluggable header 5.08"]

281

standard = "Phoenix Contact"

282

283

[[presets]]

284

id = "MSTBA2.5-12-G-5.08"

285

title = "Pluggable terminal header, 12 positions, 5.08 mm, right-angle (MSTBA 2,5)"

286

params = { series = "MSTBA 2,5", pitch = 5.08, positions = 12 }

287

aliases = ["MSTBA 2,5/12-G-5,08", "MSTBA 2,5/12-G", "12 pin pluggable terminal header 5.08", "12 way pluggable terminal block 5.08mm", "12P pluggable header 5.08"]

288

standard = "Phoenix Contact"

289

290

[[presets]]

291

id = "MSTBA2.5-13-G-5.08"

292

title = "Pluggable terminal header, 13 positions, 5.08 mm, right-angle (MSTBA 2,5)"

293

params = { series = "MSTBA 2,5", pitch = 5.08, positions = 13 }

294

aliases = ["MSTBA 2,5/13-G-5,08", "MSTBA 2,5/13-G", "13 pin pluggable terminal header 5.08", "13 way pluggable terminal block 5.08mm", "13P pluggable header 5.08"]

295

standard = "Phoenix Contact"

296

297

[[presets]]

298

id = "MSTBA2.5-14-G-5.08"

299

title = "Pluggable terminal header, 14 positions, 5.08 mm, right-angle (MSTBA 2,5)"

300

params = { series = "MSTBA 2,5", pitch = 5.08, positions = 14 }

301

aliases = ["MSTBA 2,5/14-G-5,08", "MSTBA 2,5/14-G", "14 pin pluggable terminal header 5.08", "14 way pluggable terminal block 5.08mm", "14P pluggable header 5.08"]

302

standard = "Phoenix Contact"

303

304

[[presets]]

305

id = "MSTBA2.5-15-G-5.08"

306

title = "Pluggable terminal header, 15 positions, 5.08 mm, right-angle (MSTBA 2,5)"

307

params = { series = "MSTBA 2,5", pitch = 5.08, positions = 15 }

308

aliases = ["MSTBA 2,5/15-G-5,08", "MSTBA 2,5/15-G", "15 pin pluggable terminal header 5.08", "15 way pluggable terminal block 5.08mm", "15P pluggable header 5.08"]

309

standard = "Phoenix Contact"

310

311

[[presets]]

312

id = "MSTBA2.5-16-G-5.08"

313

title = "Pluggable terminal header, 16 positions, 5.08 mm, right-angle (MSTBA 2,5)"

314

params = { series = "MSTBA 2,5", pitch = 5.08, positions = 16 }

315

aliases = ["MSTBA 2,5/16-G-5,08", "MSTBA 2,5/16-G", "16 pin pluggable terminal header 5.08", "16 way pluggable terminal block 5.08mm", "16P pluggable header 5.08"]

316

standard = "Phoenix Contact"

317

318

[[presets]]

319

id = "MSTBA2.5-2-G-5.08-simple"

320

title = "Pluggable terminal header, 2 positions, 5.08 mm, simple"

321

params = { series = "MSTBA 2,5", pitch = 5.08, positions = 2, detail = "simple" }

322

aliases = ["MSTBA 2,5/2-G-5,08 simple"]

323

standard = "Phoenix Contact"

324

# Presets of this part (factory/PRESETS.md). Written by factory/gen.py.

[[presets]]
id = "MC1.5-2-G-3.81"
title = "Pluggable terminal header, 2 positions, 3.81 mm, right-angle (MC 1,5)"
params = { series = "MC 1,5", pitch = 3.81, positions = 2 }
aliases = ["MC 1,5/2-G-3,81", "MC 1,5/2-G", "2 pin pluggable terminal header 3.81", "2 way pluggable terminal block 3.81mm", "2P pluggable header 3.81"]
standard = "Phoenix Contact"

[[presets]]
id = "MC1.5-3-G-3.81"
title = "Pluggable terminal header, 3 positions, 3.81 mm, right-angle (MC 1,5)"
params = { series = "MC 1,5", pitch = 3.81, positions = 3 }
aliases = ["MC 1,5/3-G-3,81", "MC 1,5/3-G", "3 pin pluggable terminal header 3.81", "3 way pluggable terminal block 3.81mm", "3P pluggable header 3.81"]
standard = "Phoenix Contact"

[[presets]]
id = "MC1.5-4-G-3.81"
title = "Pluggable terminal header, 4 positions, 3.81 mm, right-angle (MC 1,5)"
params = { series = "MC 1,5", pitch = 3.81, positions = 4 }
aliases = ["MC 1,5/4-G-3,81", "MC 1,5/4-G", "4 pin pluggable terminal header 3.81", "4 way pluggable terminal block 3.81mm", "4P pluggable header 3.81"]
standard = "Phoenix Contact"

[[presets]]
id = "MC1.5-5-G-3.81"
title = "Pluggable terminal header, 5 positions, 3.81 mm, right-angle (MC 1,5)"
params = { series = "MC 1,5", pitch = 3.81, positions = 5 }
aliases = ["MC 1,5/5-G-3,81", "MC 1,5/5-G", "5 pin pluggable terminal header 3.81", "5 way pluggable terminal block 3.81mm", "5P pluggable header 3.81"]
standard = "Phoenix Contact"

[[presets]]
id = "MC1.5-6-G-3.81"
title = "Pluggable terminal header, 6 positions, 3.81 mm, right-angle (MC 1,5)"
params = { series = "MC 1,5", pitch = 3.81, positions = 6 }
aliases = ["MC 1,5/6-G-3,81", "MC 1,5/6-G", "6 pin pluggable terminal header 3.81", "6 way pluggable terminal block 3.81mm", "6P pluggable header 3.81"]
standard = "Phoenix Contact"

[[presets]]
id = "MC1.5-7-G-3.81"
title = "Pluggable terminal header, 7 positions, 3.81 mm, right-angle (MC 1,5)"
params = { series = "MC 1,5", pitch = 3.81, positions = 7 }
aliases = ["MC 1,5/7-G-3,81", "MC 1,5/7-G", "7 pin pluggable terminal header 3.81", "7 way pluggable terminal block 3.81mm", "7P pluggable header 3.81"]
standard = "Phoenix Contact"

[[presets]]
id = "MC1.5-8-G-3.81"
title = "Pluggable terminal header, 8 positions, 3.81 mm, right-angle (MC 1,5)"
params = { series = "MC 1,5", pitch = 3.81, positions = 8 }
aliases = ["MC 1,5/8-G-3,81", "MC 1,5/8-G", "8 pin pluggable terminal header 3.81", "8 way pluggable terminal block 3.81mm", "8P pluggable header 3.81"]
standard = "Phoenix Contact"

[[presets]]
id = "MC1.5-9-G-3.81"
title = "Pluggable terminal header, 9 positions, 3.81 mm, right-angle (MC 1,5)"
params = { series = "MC 1,5", pitch = 3.81, positions = 9 }
aliases = ["MC 1,5/9-G-3,81", "MC 1,5/9-G", "9 pin pluggable terminal header 3.81", "9 way pluggable terminal block 3.81mm", "9P pluggable header 3.81"]
standard = "Phoenix Contact"

[[presets]]
id = "MC1.5-10-G-3.81"
title = "Pluggable terminal header, 10 positions, 3.81 mm, right-angle (MC 1,5)"
params = { series = "MC 1,5", pitch = 3.81, positions = 10 }
aliases = ["MC 1,5/10-G-3,81", "MC 1,5/10-G", "10 pin pluggable terminal header 3.81", "10 way pluggable terminal block 3.81mm", "10P pluggable header 3.81"]
standard = "Phoenix Contact"

[[presets]]
id = "MC1.5-11-G-3.81"
title = "Pluggable terminal header, 11 positions, 3.81 mm, right-angle (MC 1,5)"
params = { series = "MC 1,5", pitch = 3.81, positions = 11 }
aliases = ["MC 1,5/11-G-3,81", "MC 1,5/11-G", "11 pin pluggable terminal header 3.81", "11 way pluggable terminal block 3.81mm", "11P pluggable header 3.81"]
standard = "Phoenix Contact"

[[presets]]
id = "MC1.5-12-G-3.81"
title = "Pluggable terminal header, 12 positions, 3.81 mm, right-angle (MC 1,5)"
params = { series = "MC 1,5", pitch = 3.81, positions = 12 }
aliases = ["MC 1,5/12-G-3,81", "MC 1,5/12-G", "12 pin pluggable terminal header 3.81", "12 way pluggable terminal block 3.81mm", "12P pluggable header 3.81"]
standard = "Phoenix Contact"

[[presets]]
id = "MC1.5-13-G-3.81"
title = "Pluggable terminal header, 13 positions, 3.81 mm, right-angle (MC 1,5)"
params = { series = "MC 1,5", pitch = 3.81, positions = 13 }
aliases = ["MC 1,5/13-G-3,81", "MC 1,5/13-G", "13 pin pluggable terminal header 3.81", "13 way pluggable terminal block 3.81mm", "13P pluggable header 3.81"]
standard = "Phoenix Contact"

[[presets]]
id = "MC1.5-14-G-3.81"
title = "Pluggable terminal header, 14 positions, 3.81 mm, right-angle (MC 1,5)"
params = { series = "MC 1,5", pitch = 3.81, positions = 14 }
aliases = ["MC 1,5/14-G-3,81", "MC 1,5/14-G", "14 pin pluggable terminal header 3.81", "14 way pluggable terminal block 3.81mm", "14P pluggable header 3.81"]
standard = "Phoenix Contact"

[[presets]]
id = "MC1.5-15-G-3.81"
title = "Pluggable terminal header, 15 positions, 3.81 mm, right-angle (MC 1,5)"
params = { series = "MC 1,5", pitch = 3.81, positions = 15 }
aliases = ["MC 1,5/15-G-3,81", "MC 1,5/15-G", "15 pin pluggable terminal header 3.81", "15 way pluggable terminal block 3.81mm", "15P pluggable header 3.81"]
standard = "Phoenix Contact"

[[presets]]
id = "MC1.5-16-G-3.81"
title = "Pluggable terminal header, 16 positions, 3.81 mm, right-angle (MC 1,5)"
params = { series = "MC 1,5", pitch = 3.81, positions = 16 }
aliases = ["MC 1,5/16-G-3,81", "MC 1,5/16-G", "16 pin pluggable terminal header 3.81", "16 way pluggable terminal block 3.81mm", "16P pluggable header 3.81"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-2-G-5.0"
title = "Pluggable terminal header, 2 positions, 5.0 mm, right-angle (MSTBA 2,5)"
params = { series = "MSTBA 2,5", pitch = 5, positions = 2 }
aliases = ["MSTBA 2,5/2-G-5,0", "MSTBA 2,5/2-G", "2 pin pluggable terminal header 5.0", "2 way pluggable terminal block 5.0mm", "2P pluggable header 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-3-G-5.0"
title = "Pluggable terminal header, 3 positions, 5.0 mm, right-angle (MSTBA 2,5)"
params = { series = "MSTBA 2,5", pitch = 5, positions = 3 }
aliases = ["MSTBA 2,5/3-G-5,0", "MSTBA 2,5/3-G", "3 pin pluggable terminal header 5.0", "3 way pluggable terminal block 5.0mm", "3P pluggable header 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-4-G-5.0"
title = "Pluggable terminal header, 4 positions, 5.0 mm, right-angle (MSTBA 2,5)"
params = { series = "MSTBA 2,5", pitch = 5, positions = 4 }
aliases = ["MSTBA 2,5/4-G-5,0", "MSTBA 2,5/4-G", "4 pin pluggable terminal header 5.0", "4 way pluggable terminal block 5.0mm", "4P pluggable header 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-5-G-5.0"
title = "Pluggable terminal header, 5 positions, 5.0 mm, right-angle (MSTBA 2,5)"
params = { series = "MSTBA 2,5", pitch = 5, positions = 5 }
aliases = ["MSTBA 2,5/5-G-5,0", "MSTBA 2,5/5-G", "5 pin pluggable terminal header 5.0", "5 way pluggable terminal block 5.0mm", "5P pluggable header 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-6-G-5.0"
title = "Pluggable terminal header, 6 positions, 5.0 mm, right-angle (MSTBA 2,5)"
params = { series = "MSTBA 2,5", pitch = 5, positions = 6 }
aliases = ["MSTBA 2,5/6-G-5,0", "MSTBA 2,5/6-G", "6 pin pluggable terminal header 5.0", "6 way pluggable terminal block 5.0mm", "6P pluggable header 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-7-G-5.0"
title = "Pluggable terminal header, 7 positions, 5.0 mm, right-angle (MSTBA 2,5)"
params = { series = "MSTBA 2,5", pitch = 5, positions = 7 }
aliases = ["MSTBA 2,5/7-G-5,0", "MSTBA 2,5/7-G", "7 pin pluggable terminal header 5.0", "7 way pluggable terminal block 5.0mm", "7P pluggable header 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-8-G-5.0"
title = "Pluggable terminal header, 8 positions, 5.0 mm, right-angle (MSTBA 2,5)"
params = { series = "MSTBA 2,5", pitch = 5, positions = 8 }
aliases = ["MSTBA 2,5/8-G-5,0", "MSTBA 2,5/8-G", "8 pin pluggable terminal header 5.0", "8 way pluggable terminal block 5.0mm", "8P pluggable header 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-9-G-5.0"
title = "Pluggable terminal header, 9 positions, 5.0 mm, right-angle (MSTBA 2,5)"
params = { series = "MSTBA 2,5", pitch = 5, positions = 9 }
aliases = ["MSTBA 2,5/9-G-5,0", "MSTBA 2,5/9-G", "9 pin pluggable terminal header 5.0", "9 way pluggable terminal block 5.0mm", "9P pluggable header 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-10-G-5.0"
title = "Pluggable terminal header, 10 positions, 5.0 mm, right-angle (MSTBA 2,5)"
params = { series = "MSTBA 2,5", pitch = 5, positions = 10 }
aliases = ["MSTBA 2,5/10-G-5,0", "MSTBA 2,5/10-G", "10 pin pluggable terminal header 5.0", "10 way pluggable terminal block 5.0mm", "10P pluggable header 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-11-G-5.0"
title = "Pluggable terminal header, 11 positions, 5.0 mm, right-angle (MSTBA 2,5)"
params = { series = "MSTBA 2,5", pitch = 5, positions = 11 }
aliases = ["MSTBA 2,5/11-G-5,0", "MSTBA 2,5/11-G", "11 pin pluggable terminal header 5.0", "11 way pluggable terminal block 5.0mm", "11P pluggable header 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-12-G-5.0"
title = "Pluggable terminal header, 12 positions, 5.0 mm, right-angle (MSTBA 2,5)"
params = { series = "MSTBA 2,5", pitch = 5, positions = 12 }
aliases = ["MSTBA 2,5/12-G-5,0", "MSTBA 2,5/12-G", "12 pin pluggable terminal header 5.0", "12 way pluggable terminal block 5.0mm", "12P pluggable header 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-13-G-5.0"
title = "Pluggable terminal header, 13 positions, 5.0 mm, right-angle (MSTBA 2,5)"
params = { series = "MSTBA 2,5", pitch = 5, positions = 13 }
aliases = ["MSTBA 2,5/13-G-5,0", "MSTBA 2,5/13-G", "13 pin pluggable terminal header 5.0", "13 way pluggable terminal block 5.0mm", "13P pluggable header 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-14-G-5.0"
title = "Pluggable terminal header, 14 positions, 5.0 mm, right-angle (MSTBA 2,5)"
params = { series = "MSTBA 2,5", pitch = 5, positions = 14 }
aliases = ["MSTBA 2,5/14-G-5,0", "MSTBA 2,5/14-G", "14 pin pluggable terminal header 5.0", "14 way pluggable terminal block 5.0mm", "14P pluggable header 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-15-G-5.0"
title = "Pluggable terminal header, 15 positions, 5.0 mm, right-angle (MSTBA 2,5)"
params = { series = "MSTBA 2,5", pitch = 5, positions = 15 }
aliases = ["MSTBA 2,5/15-G-5,0", "MSTBA 2,5/15-G", "15 pin pluggable terminal header 5.0", "15 way pluggable terminal block 5.0mm", "15P pluggable header 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-16-G-5.0"
title = "Pluggable terminal header, 16 positions, 5.0 mm, right-angle (MSTBA 2,5)"
params = { series = "MSTBA 2,5", pitch = 5, positions = 16 }
aliases = ["MSTBA 2,5/16-G-5,0", "MSTBA 2,5/16-G", "16 pin pluggable terminal header 5.0", "16 way pluggable terminal block 5.0mm", "16P pluggable header 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-2-G-5.08"
title = "Pluggable terminal header, 2 positions, 5.08 mm, right-angle (MSTBA 2,5)"
params = { series = "MSTBA 2,5", pitch = 5.08, positions = 2 }
aliases = ["MSTBA 2,5/2-G-5,08", "MSTBA 2,5/2-G", "2 pin pluggable terminal header 5.08", "2 way pluggable terminal block 5.08mm", "2P pluggable header 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-3-G-5.08"
title = "Pluggable terminal header, 3 positions, 5.08 mm, right-angle (MSTBA 2,5)"
params = { series = "MSTBA 2,5", pitch = 5.08, positions = 3 }
aliases = ["MSTBA 2,5/3-G-5,08", "MSTBA 2,5/3-G", "3 pin pluggable terminal header 5.08", "3 way pluggable terminal block 5.08mm", "3P pluggable header 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-4-G-5.08"
title = "Pluggable terminal header, 4 positions, 5.08 mm, right-angle (MSTBA 2,5)"
params = { series = "MSTBA 2,5", pitch = 5.08, positions = 4 }
aliases = ["MSTBA 2,5/4-G-5,08", "MSTBA 2,5/4-G", "4 pin pluggable terminal header 5.08", "4 way pluggable terminal block 5.08mm", "4P pluggable header 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-5-G-5.08"
title = "Pluggable terminal header, 5 positions, 5.08 mm, right-angle (MSTBA 2,5)"
params = { series = "MSTBA 2,5", pitch = 5.08, positions = 5 }
aliases = ["MSTBA 2,5/5-G-5,08", "MSTBA 2,5/5-G", "5 pin pluggable terminal header 5.08", "5 way pluggable terminal block 5.08mm", "5P pluggable header 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-6-G-5.08"
title = "Pluggable terminal header, 6 positions, 5.08 mm, right-angle (MSTBA 2,5)"
params = { series = "MSTBA 2,5", pitch = 5.08, positions = 6 }
aliases = ["MSTBA 2,5/6-G-5,08", "MSTBA 2,5/6-G", "6 pin pluggable terminal header 5.08", "6 way pluggable terminal block 5.08mm", "6P pluggable header 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-7-G-5.08"
title = "Pluggable terminal header, 7 positions, 5.08 mm, right-angle (MSTBA 2,5)"
params = { series = "MSTBA 2,5", pitch = 5.08, positions = 7 }
aliases = ["MSTBA 2,5/7-G-5,08", "MSTBA 2,5/7-G", "7 pin pluggable terminal header 5.08", "7 way pluggable terminal block 5.08mm", "7P pluggable header 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-8-G-5.08"
title = "Pluggable terminal header, 8 positions, 5.08 mm, right-angle (MSTBA 2,5)"
params = { series = "MSTBA 2,5", pitch = 5.08, positions = 8 }
aliases = ["MSTBA 2,5/8-G-5,08", "MSTBA 2,5/8-G", "8 pin pluggable terminal header 5.08", "8 way pluggable terminal block 5.08mm", "8P pluggable header 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-9-G-5.08"
title = "Pluggable terminal header, 9 positions, 5.08 mm, right-angle (MSTBA 2,5)"
params = { series = "MSTBA 2,5", pitch = 5.08, positions = 9 }
aliases = ["MSTBA 2,5/9-G-5,08", "MSTBA 2,5/9-G", "9 pin pluggable terminal header 5.08", "9 way pluggable terminal block 5.08mm", "9P pluggable header 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-10-G-5.08"
title = "Pluggable terminal header, 10 positions, 5.08 mm, right-angle (MSTBA 2,5)"
params = { series = "MSTBA 2,5", pitch = 5.08, positions = 10 }
aliases = ["MSTBA 2,5/10-G-5,08", "MSTBA 2,5/10-G", "10 pin pluggable terminal header 5.08", "10 way pluggable terminal block 5.08mm", "10P pluggable header 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-11-G-5.08"
title = "Pluggable terminal header, 11 positions, 5.08 mm, right-angle (MSTBA 2,5)"
params = { series = "MSTBA 2,5", pitch = 5.08, positions = 11 }
aliases = ["MSTBA 2,5/11-G-5,08", "MSTBA 2,5/11-G", "11 pin pluggable terminal header 5.08", "11 way pluggable terminal block 5.08mm", "11P pluggable header 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-12-G-5.08"
title = "Pluggable terminal header, 12 positions, 5.08 mm, right-angle (MSTBA 2,5)"
params = { series = "MSTBA 2,5", pitch = 5.08, positions = 12 }
aliases = ["MSTBA 2,5/12-G-5,08", "MSTBA 2,5/12-G", "12 pin pluggable terminal header 5.08", "12 way pluggable terminal block 5.08mm", "12P pluggable header 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-13-G-5.08"
title = "Pluggable terminal header, 13 positions, 5.08 mm, right-angle (MSTBA 2,5)"
params = { series = "MSTBA 2,5", pitch = 5.08, positions = 13 }
aliases = ["MSTBA 2,5/13-G-5,08", "MSTBA 2,5/13-G", "13 pin pluggable terminal header 5.08", "13 way pluggable terminal block 5.08mm", "13P pluggable header 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-14-G-5.08"
title = "Pluggable terminal header, 14 positions, 5.08 mm, right-angle (MSTBA 2,5)"
params = { series = "MSTBA 2,5", pitch = 5.08, positions = 14 }
aliases = ["MSTBA 2,5/14-G-5,08", "MSTBA 2,5/14-G", "14 pin pluggable terminal header 5.08", "14 way pluggable terminal block 5.08mm", "14P pluggable header 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-15-G-5.08"
title = "Pluggable terminal header, 15 positions, 5.08 mm, right-angle (MSTBA 2,5)"
params = { series = "MSTBA 2,5", pitch = 5.08, positions = 15 }
aliases = ["MSTBA 2,5/15-G-5,08", "MSTBA 2,5/15-G", "15 pin pluggable terminal header 5.08", "15 way pluggable terminal block 5.08mm", "15P pluggable header 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-16-G-5.08"
title = "Pluggable terminal header, 16 positions, 5.08 mm, right-angle (MSTBA 2,5)"
params = { series = "MSTBA 2,5", pitch = 5.08, positions = 16 }
aliases = ["MSTBA 2,5/16-G-5,08", "MSTBA 2,5/16-G", "16 pin pluggable terminal header 5.08", "16 way pluggable terminal block 5.08mm", "16P pluggable header 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-2-G-5.08-simple"
title = "Pluggable terminal header, 2 positions, 5.08 mm, simple"
params = { series = "MSTBA 2,5", pitch = 5.08, positions = 2, detail = "simple" }
aliases = ["MSTBA 2,5/2-G-5,08 simple"]
standard = "Phoenix Contact"

README.md 19 lines · Markdown

Download

Pluggable terminal block header

A right-angle PCB header for pluggable terminal blocks, of the Phoenix Contact MSTBA 2,5 type (5.0 or 5.08 mm pitch) or MC 1,5 type (3.81 mm), 2 to 16 positions. Pin 1 is at the origin, the row runs along +X, and the housing sits on the XY plane with its opening facing -Y. The solder pins go down through the board.

Source

Phoenix Contact data sheet, MSTBA 2,5/ 2-G-5,08 (1757242), a copy at https://static.chipdip.ru/lib/776/DOC031776447.pdf (Phoenix Contact's own site refuses automated downloads):

Dimensions (page 5): length 12, height 8.6 above the board, solder pins 3.5 long.
Dimensional drawing (page 6): width a + 7 (5.0 mm) or a + 7.08 (5.08 mm), and the solder pins 2 from the back face.

The data sheet is for the 2-position, 5.08 mm part. Its drawing gives the same housing for both pitches.

MC 1,5: data sheet MC 1,5/ 2-G-3,81 (1803277, German, 10.03.2011), a copy at https://asset.conrad.com/media10/add/160267/c1/-/de/000740533DS02/tehnicni-podatki-740533-pinsko-ohisje-za-tiskano-vezje-mc-phoenix-contact-1803277-raster-381-mm-1-kos.pdf. Technical data (page 1): length 9.2, pins 0.8 x 0.8. Dimensional drawing (page 4): width a + 5.2, height 7.25, solder pins 3.4 long and 8 from the opening.

Proportions, for looks only: the MSTBA pin section (1.2), the wall, and the mating pins' reach. The data sheet's side view doesn't dimension the reach, so the pins run to 1.5 mm short of the opening, where the plug's contacts meet them. The plug isn't part of this header. The housing is PA, modelled as pa6, green.

Vertical (MSTBVA, MCV), flanged (GF) and 3.5 mm MC headers aren't here yet; see COVERAGE.md.

# Pluggable terminal block header

A right-angle PCB header for pluggable terminal blocks, of the Phoenix Contact MSTBA 2,5 type (5.0 or 5.08 mm pitch) or MC 1,5 type (3.81 mm), 2 to 16 positions. Pin 1 is at the origin, the row runs along +X, and the housing sits on the XY plane with its opening facing -Y. The solder pins go down through the board.

## Source

Phoenix Contact data sheet, *MSTBA 2,5/ 2-G-5,08* (1757242), a copy at <https://static.chipdip.ru/lib/776/DOC031776447.pdf> (Phoenix Contact's own site refuses automated downloads):

- Dimensions (page 5): length 12, height 8.6 above the board, solder pins 3.5 long.
- Dimensional drawing (page 6): width a + 7 (5.0 mm) or a + 7.08 (5.08 mm), and the solder pins 2 from the back face.

The data sheet is for the 2-position, 5.08 mm part. Its drawing gives the same housing for both pitches.

MC 1,5: data sheet *MC 1,5/ 2-G-3,81* (1803277, German, 10.03.2011), a copy at <https://asset.conrad.com/media10/add/160267/c1/-/de/000740533DS02/tehnicni-podatki-740533-pinsko-ohisje-za-tiskano-vezje-mc-phoenix-contact-1803277-raster-381-mm-1-kos.pdf>. Technical data (page 1): length 9.2, pins 0.8 x 0.8. Dimensional drawing (page 4): width a + 5.2, height 7.25, solder pins 3.4 long and 8 from the opening.

**Proportions, for looks only:** the MSTBA pin section (1.2), the wall, and the mating pins' reach. The data sheet's side view doesn't dimension the reach, so the pins run to 1.5 mm short of the opening, where the plug's contacts meet them. The plug isn't part of this header. The housing is PA, modelled as `pa6`, green.

Vertical (MSTBVA, MCV), flanged (GF) and 3.5 mm MC headers aren't here yet; see `COVERAGE.md`.

Use this part

STEVE

Open in STEVE

Open it in STEVE The STEVE runtime runs in STEVE: open the part there, or download the code and bundle.

Get the code

curl -o part.py "https://pythonparts.org/p/steve/pluggable-terminal-header/v/1.1.0/raw/part.py"

Raw files, bundle and API

curl "https://pythonparts.org/api/v1/parts/steve/pluggable-terminal-header/1.1.0"

The version's JSON (parameters, presets, files); add /build?name=value for a build at other values.

About this part

steve101 parts

Profile

Polyamide 6 (nylon 6)Plastics · Custom finish · 1.15 g/cm³

Mass: 0.71 g

At the parameters shown in the viewer.

License: MIT

Permissive: use, change and sell it; keep the copyright notice.

Runtime: STEVE
Requirements: None stated in the code
Built with: CadQuery 2.9.0.dev0
Published: Nov 5, 2026
Downloads: 0
Builds: 0
Stars: 0
Bundle: 0d5fa1561e95…

#terminal-block #pluggable #header #phoenix #mstb #connector #electronics

Checks

PassedImports: steve

Every published part passes our checks before it’s listed. It is still code: read it before you use it.

Request a removal A copyright notice, or a trademark, confidential design, safety, malicious code or other problem. Report an illegal or prohibited item

Right-angle PCB header of the MSTBA 2,5 or MC 1,5 type, with its opening, mating pins and solder pins. Width, length, height and pins from Phoenix Contact's data sheets. See the README.

Pluggable terminal block header

Source

Phoenix Contact data sheet, MSTBA 2,5/ 2-G-5,08 (1757242), a copy at https://static.chipdip.ru/lib/776/DOC031776447.pdf (Phoenix Contact's own site refuses automated downloads):

Dimensions (page 5): length 12, height 8.6 above the board, solder pins 3.5 long.
Dimensional drawing (page 6): width a + 7 (5.0 mm) or a + 7.08 (5.08 mm), and the solder pins 2 from the back face.

The data sheet is for the 2-position, 5.08 mm part. Its drawing gives the same housing for both pitches.

Vertical (MSTBVA, MCV), flanged (GF) and 3.5 mm MC headers aren't here yet; see COVERAGE.md.

1.2.0 Latest Nov 5, 2026 · 1 hour ago Compare with 1.1.0

Vertical MSTBVA 2,5 headers at 5.08 mm. Right-angle parts are unchanged.
1.1.0 Nov 5, 2026 · 1 hour ago Compare with 1.0.0

MC 1,5 headers at 3.81 mm. MSTBA 2,5 parts are unchanged.
1.0.0 Nov 5, 2026 · 1 hour ago

More #terminal-block

STEVEMIT

steve/screw-terminal-block

PCB screw terminal block, Phoenix Contact types: MKDS 1,5 (5.0, 5.08 mm), PT 1,5 (3.5 mm), MPT 0,5 (2.54 mm).

0 57 sizes 0 1 hour ago v1.1.0

STEVEMIT

steve/jst-ph-header

JST PH shrouded header, 2.0 mm pitch, top entry: B2B-PH-K to B16B-PH-K.

0 16 sizes 0 1 hour ago v1.0.0

STEVEMIT

steve/pin-header

Through-hole pin header, 2.54 mm and 2.00 mm pitch, one or two rows, 1 to 40 pins per row, straight or right-angle.

0 241 sizes 0 2 hours ago v1.1.0

STEVEMIT

steve/jst-xh-header

JST XH shrouded header, 2.5 mm pitch, top entry: B2B-XH-A to B16B-XH-A and B20B-XH-A.

0 17 sizes 0 1 hour ago v1.0.0

steve/pluggable-terminal-header

Pluggable terminal block header

Source

Pluggable terminal block header

Source

Related parts

steve/screw-terminal-block

steve/jst-ph-header

steve/pin-header

steve/jst-xh-header