steve/pin-header

Through-hole pin header, 2.54 mm and 2.00 mm pitch, one or two rows, 1 to 40 pins per row, straight or right-angle.

v1.1.0 Latest STEVE MIT 0

Open in STEVE

Isometric

Parameters

Preset241 sizes

Pitch

2.542.0

Rows

Pins per row1–40

Style2 options

right-angle is 2.54 mm only.

Detail

fullsimple

full: square posts and a notched insulator. simple: one block per header, for big assemblies.

Defaults built

part.py 76 lines · Python · STEVE runtime · checked

Download

"""Through-hole pin header, 2.54 mm and 2.00 mm pitch, one or two rows, straight or right-angle (2.54 mm only). Pin 1 is at the origin, the row along +X.

Straight: the second row along +Y, the insulator's underside on the XY plane, the mating posts up. Right-angle: the second row's tails along -Y, the

insulator standing on the XY plane, the mating posts along +Y. The tails go down through the board. Dimensions in the README."""

from steve import Model

pitch = 2.54 # mm Pitch

rows = 1 # Rows

pins = 8 # Pins per row

style = "straight" # straight or right-angle

detail = "full" # full: square posts and notched insulator; simple: one block per row, with no posts

# pitch: (above the insulator C, insulator height, tail B, one-row width, two-row width, post square).

# 2.54: Samtec TSW lead style -07, catalogue page TSW/HTSW (F-226), A 10.92, B 2.54, C 5.84, widths 2.48 and 5.02, post .025 in.

# 2.00: Samtec TMM lead style -02, catalogue page TMM (F-226), A 8.20, B 3.70, C 3.00, body 1.50, widths 1.97 and 3.94. The page doesn't

# print the post size, so 0.50 here is a proportion of the pitch, for looks.

SIZES = {2.54: (5.84, 2.54, 2.54, 2.48, 5.02, 0.64), 2.0: (3.00, 1.50, 3.70, 1.97, 3.94, 0.50)}

# Right-angle, 2.54: Samtec TSW lead style -08-RA, same page: post out from the insulator C 5.84, tail below the insulator E 2.29, tail to the insulator D 1.52,

# insulator height 3.02 (one row) and 5.56 (two rows). The insulator's depth is taken as the straight header's 2.54 high.

RIGHT_ANGLE = (5.84, 2.29, 1.52, 3.02, 5.56)

above, body_h, tail, one, two, post = SIZES[pitch]

width = one if rows == 1 else two

length = pitch * pins

y0 = (rows - 1) * pitch / 2 - width / 2

x0 = -pitch / 2

notch = 0.12 * pitch # the V between pins, for looks

outline = [(x0, y0)]

for i in range(1, pins):

outline += [(x0 + i * pitch - notch, y0), (x0 + i * pitch, y0 + notch), (x0 + i * pitch + notch, y0)]

outline += [(x0 + length, y0), (x0 + length, y0 + width)]

for i in range(pins - 1, 0, -1):

outline += [(x0 + i * pitch + notch, y0 + width), (x0 + i * pitch, y0 + width - notch), (x0 + i * pitch - notch, y0 + width)]

outline += [(x0, y0 + width)]

model = Model()

if style == "right-angle":

out, drop, back, high_one, high_two = RIGHT_ANGLE

high = high_one if rows == 1 else high_two

with model.sketch("body_sketch", on="XY", name="Insulator") as sk:

sk.rect("body_outline", (x0, back), (x0 + length, back + body_h))

model.extrude("body", "body_sketch", distance=high, name="Insulator")

if detail == "full":

rise = (high - (rows - 1) * pitch) / 2

for row in range(rows):

z = rise + row * pitch

y_tail = -row * pitch

model.plane(f"run_plane_{row}", on="XZ", offset=-y_tail + post / 2, name="Posts")

with model.sketch(f"post_sketch_{row}", on=f"run_plane_{row}", name="Posts") as sk:

for i in range(pins):

sk.rect(f"post_{row}_{i}", (i * pitch - post / 2, z - post / 2), (i * pitch + post / 2, z + post / 2))

model.extrude(f"posts_{row}", f"post_sketch_{row}", distance=-(back + body_h + out - y_tail + post / 2), name="Posts")

model.plane(f"tail_plane_{row}", on="XY", offset=-drop, name="Tails")

with model.sketch(f"tail_sketch_{row}", on=f"tail_plane_{row}", name="Tails") as sk:

for i in range(pins):

sk.rect(f"tail_{row}_{i}", (i * pitch - post / 2, y_tail - post / 2), (i * pitch + post / 2, y_tail + post / 2))

model.extrude(f"tails_{row}", f"tail_sketch_{row}", distance=drop + z + post / 2, name="Tails")

else:

with model.sketch("body_sketch", on="XY", name="Insulator") as sk:

if detail == "full":

sk.polyline("body_outline", outline, closed=True)

else:

sk.rect("body_outline", (x0, y0), (x0 + length, y0 + width))

model.extrude("body", "body_sketch", distance=body_h if detail == "full" else body_h + above, name="Insulator")

if detail == "full":

model.plane("tail_plane", on="XY", offset=-tail, name="Tail end")

with model.sketch("posts_sketch", on="tail_plane", name="Posts") as sk:

for row in range(rows):

for i in range(pins):

x, y = i * pitch, row * pitch

sk.rect(f"post_{row}_{i}", (x - post / 2, y - post / 2), (x + post / 2, y + post / 2))

model.extrude("posts", "posts_sketch", distance=tail + body_h + above, name="Posts")

model.material("steel-generic", color="#2b2b2d")

result = model.result()

"""Through-hole pin header, 2.54 mm and 2.00 mm pitch, one or two rows, straight or right-angle (2.54 mm only). Pin 1 is at the origin, the row along +X.
Straight: the second row along +Y, the insulator's underside on the XY plane, the mating posts up. Right-angle: the second row's tails along -Y, the
insulator standing on the XY plane, the mating posts along +Y. The tails go down through the board. Dimensions in the README."""
from steve import Model

pitch = 2.54  # mm Pitch
rows = 1  # Rows
pins = 8  # Pins per row
style = "straight"  # straight or right-angle
detail = "full"  # full: square posts and notched insulator; simple: one block per row, with no posts

# pitch: (above the insulator C, insulator height, tail B, one-row width, two-row width, post square).
# 2.54: Samtec TSW lead style -07, catalogue page TSW/HTSW (F-226), A 10.92, B 2.54, C 5.84, widths 2.48 and 5.02, post .025 in.
# 2.00: Samtec TMM lead style -02, catalogue page TMM (F-226), A 8.20, B 3.70, C 3.00, body 1.50, widths 1.97 and 3.94. The page doesn't
# print the post size, so 0.50 here is a proportion of the pitch, for looks.
SIZES = {2.54: (5.84, 2.54, 2.54, 2.48, 5.02, 0.64), 2.0: (3.00, 1.50, 3.70, 1.97, 3.94, 0.50)}

# Right-angle, 2.54: Samtec TSW lead style -08-RA, same page: post out from the insulator C 5.84, tail below the insulator E 2.29, tail to the insulator D 1.52,
# insulator height 3.02 (one row) and 5.56 (two rows). The insulator's depth is taken as the straight header's 2.54 high.
RIGHT_ANGLE = (5.84, 2.29, 1.52, 3.02, 5.56)


above, body_h, tail, one, two, post = SIZES[pitch]
width = one if rows == 1 else two
length = pitch * pins
y0 = (rows - 1) * pitch / 2 - width / 2
x0 = -pitch / 2
notch = 0.12 * pitch   # the V between pins, for looks
outline = [(x0, y0)]
for i in range(1, pins):
    outline += [(x0 + i * pitch - notch, y0), (x0 + i * pitch, y0 + notch), (x0 + i * pitch + notch, y0)]
outline += [(x0 + length, y0), (x0 + length, y0 + width)]
for i in range(pins - 1, 0, -1):
    outline += [(x0 + i * pitch + notch, y0 + width), (x0 + i * pitch, y0 + width - notch), (x0 + i * pitch - notch, y0 + width)]
outline += [(x0, y0 + width)]

model = Model()
if style == "right-angle":
    out, drop, back, high_one, high_two = RIGHT_ANGLE
    high = high_one if rows == 1 else high_two
    with model.sketch("body_sketch", on="XY", name="Insulator") as sk:
        sk.rect("body_outline", (x0, back), (x0 + length, back + body_h))
    model.extrude("body", "body_sketch", distance=high, name="Insulator")
    if detail == "full":
        rise = (high - (rows - 1) * pitch) / 2
        for row in range(rows):
            z = rise + row * pitch
            y_tail = -row * pitch
            model.plane(f"run_plane_{row}", on="XZ", offset=-y_tail + post / 2, name="Posts")
            with model.sketch(f"post_sketch_{row}", on=f"run_plane_{row}", name="Posts") as sk:
                for i in range(pins):
                    sk.rect(f"post_{row}_{i}", (i * pitch - post / 2, z - post / 2), (i * pitch + post / 2, z + post / 2))
            model.extrude(f"posts_{row}", f"post_sketch_{row}", distance=-(back + body_h + out - y_tail + post / 2), name="Posts")
            model.plane(f"tail_plane_{row}", on="XY", offset=-drop, name="Tails")
            with model.sketch(f"tail_sketch_{row}", on=f"tail_plane_{row}", name="Tails") as sk:
                for i in range(pins):
                    sk.rect(f"tail_{row}_{i}", (i * pitch - post / 2, y_tail - post / 2), (i * pitch + post / 2, y_tail + post / 2))
            model.extrude(f"tails_{row}", f"tail_sketch_{row}", distance=drop + z + post / 2, name="Tails")
else:
    with model.sketch("body_sketch", on="XY", name="Insulator") as sk:
        if detail == "full":
            sk.polyline("body_outline", outline, closed=True)
        else:
            sk.rect("body_outline", (x0, y0), (x0 + length, y0 + width))
    model.extrude("body", "body_sketch", distance=body_h if detail == "full" else body_h + above, name="Insulator")
    if detail == "full":
        model.plane("tail_plane", on="XY", offset=-tail, name="Tail end")
        with model.sketch("posts_sketch", on="tail_plane", name="Posts") as sk:
            for row in range(rows):
                for i in range(pins):
                    x, y = i * pitch, row * pitch
                    sk.rect(f"post_{row}_{i}", (x - post / 2, y - post / 2), (x + post / 2, y + post / 2))
        model.extrude("posts", "posts_sketch", distance=tail + body_h + above, name="Posts")
model.material("steel-generic", color="#2b2b2d")
result = model.result()

pypart.toml 43 lines · TOML

Download

name = "steve/pin-header"

version = "1.1.0"

runtime = "steve"

license = "MIT"

summary = "Through-hole pin header, 2.54 mm and 2.00 mm pitch, one or two rows, 1 to 40 pins per row, straight or right-angle."

changes = "Right-angle 2.54 mm headers."

description = """Through-hole pin header, straight or right-angle, with square posts and a notched insulator. Pin 1 at the origin, row along +X. Heights and widths from Samtec's TSW and TMM pages. See the README."""

tags = ["pin-header", "connector", "header", "board-to-board", "electronics"]

[parameters.pitch]

type = "choice"

default = 2.54

choices = [2.54, 2.0]

label = "Pitch"

unit = "mm"

[parameters.rows]

type = "choice"

default = 1

choices = [1, 2]

label = "Rows"

[parameters.pins]

type = "integer"

default = 8

min = 1

max = 40

label = "Pins per row"

[parameters.style]

type = "choice"

default = "straight"

choices = ["straight", "right-angle"]

label = "Style"

description = "right-angle is 2.54 mm only."

[parameters.detail]

type = "choice"

default = "full"

choices = ["full", "simple"]

label = "Detail"

description = "full: square posts and a notched insulator. simple: one block per header, for big assemblies."

name = "steve/pin-header"
version = "1.1.0"
runtime = "steve"
license = "MIT"
summary = "Through-hole pin header, 2.54 mm and 2.00 mm pitch, one or two rows, 1 to 40 pins per row, straight or right-angle."
changes = "Right-angle 2.54 mm headers."
description = """Through-hole pin header, straight or right-angle, with square posts and a notched insulator. Pin 1 at the origin, row along +X. Heights and widths from Samtec's TSW and TMM pages. See the README."""
tags = ["pin-header", "connector", "header", "board-to-board", "electronics"]

[parameters.pitch]
type = "choice"
default = 2.54
choices = [2.54, 2.0]
label = "Pitch"
unit = "mm"

[parameters.rows]
type = "choice"
default = 1
choices = [1, 2]
label = "Rows"

[parameters.pins]
type = "integer"
default = 8
min = 1
max = 40
label = "Pins per row"

[parameters.style]
type = "choice"
default = "straight"
choices = ["straight", "right-angle"]
label = "Style"
description = "right-angle is 2.54 mm only."

[parameters.detail]
type = "choice"
default = "full"
choices = ["full", "simple"]
label = "Detail"
description = "full: square posts and a notched insulator. simple: one block per header, for big assemblies."

presets.toml 1689 lines · TOML

Download

# Presets of this part (factory/PRESETS.md). Written by factory/gen.py.

[[presets]]

id = "2.54-1x01-RA"

title = "Pin header 1x01, 2.54 mm, right-angle"

params = { pitch = 2.54, rows = 1, pins = 1, style = "right-angle" }

aliases = ["1x01 right angle header", "1x1 right angle header", "1x1 right angle 2.54", "1x01 2.54mm right angle", "1 pin right angle header"]

standard = "Samtec TSW"

[[presets]]

id = "2.54-1x02-RA"

title = "Pin header 1x02, 2.54 mm, right-angle"

params = { pitch = 2.54, rows = 1, pins = 2, style = "right-angle" }

aliases = ["1x02 right angle header", "1x2 right angle header", "1x2 right angle 2.54", "1x02 2.54mm right angle", "2 pin right angle header"]

standard = "Samtec TSW"

[[presets]]

id = "2.54-1x03-RA"

title = "Pin header 1x03, 2.54 mm, right-angle"

params = { pitch = 2.54, rows = 1, pins = 3, style = "right-angle" }

aliases = ["1x03 right angle header", "1x3 right angle header", "1x3 right angle 2.54", "1x03 2.54mm right angle", "3 pin right angle header"]

standard = "Samtec TSW"

[[presets]]

id = "2.54-1x04-RA"

title = "Pin header 1x04, 2.54 mm, right-angle"

params = { pitch = 2.54, rows = 1, pins = 4, style = "right-angle" }

aliases = ["1x04 right angle header", "1x4 right angle header", "1x4 right angle 2.54", "1x04 2.54mm right angle", "4 pin right angle header"]

standard = "Samtec TSW"

[[presets]]

id = "2.54-1x05-RA"

title = "Pin header 1x05, 2.54 mm, right-angle"

params = { pitch = 2.54, rows = 1, pins = 5, style = "right-angle" }

aliases = ["1x05 right angle header", "1x5 right angle header", "1x5 right angle 2.54", "1x05 2.54mm right angle", "5 pin right angle header"]

standard = "Samtec TSW"

[[presets]]

id = "2.54-1x06-RA"

title = "Pin header 1x06, 2.54 mm, right-angle"

params = { pitch = 2.54, rows = 1, pins = 6, style = "right-angle" }

aliases = ["1x06 right angle header", "1x6 right angle header", "1x6 right angle 2.54", "1x06 2.54mm right angle", "6 pin right angle header"]

standard = "Samtec TSW"

[[presets]]

id = "2.54-1x07-RA"

title = "Pin header 1x07, 2.54 mm, right-angle"

params = { pitch = 2.54, rows = 1, pins = 7, style = "right-angle" }

aliases = ["1x07 right angle header", "1x7 right angle header", "1x7 right angle 2.54", "1x07 2.54mm right angle", "7 pin right angle header"]

standard = "Samtec TSW"

[[presets]]

id = "2.54-1x08-RA"

title = "Pin header 1x08, 2.54 mm, right-angle"

params = { pitch = 2.54, rows = 1, pins = 8, style = "right-angle" }

aliases = ["1x08 right angle header", "1x8 right angle header", "1x8 right angle 2.54", "1x08 2.54mm right angle", "8 pin right angle header"]

standard = "Samtec TSW"

[[presets]]

id = "2.54-1x09-RA"

title = "Pin header 1x09, 2.54 mm, right-angle"

params = { pitch = 2.54, rows = 1, pins = 9, style = "right-angle" }

aliases = ["1x09 right angle header", "1x9 right angle header", "1x9 right angle 2.54", "1x09 2.54mm right angle", "9 pin right angle header"]

standard = "Samtec TSW"

[[presets]]

id = "2.54-1x10-RA"

title = "Pin header 1x10, 2.54 mm, right-angle"

params = { pitch = 2.54, rows = 1, pins = 10, style = "right-angle" }

aliases = ["1x10 right angle header", "1x10 right angle 2.54", "1x10 2.54mm right angle", "10 pin right angle header"]

standard = "Samtec TSW"

[[presets]]

id = "2.54-1x11-RA"

title = "Pin header 1x11, 2.54 mm, right-angle"

params = { pitch = 2.54, rows = 1, pins = 11, style = "right-angle" }

aliases = ["1x11 right angle header", "1x11 right angle 2.54", "1x11 2.54mm right angle", "11 pin right angle header"]

standard = "Samtec TSW"

[[presets]]

id = "2.54-1x12-RA"

title = "Pin header 1x12, 2.54 mm, right-angle"

params = { pitch = 2.54, rows = 1, pins = 12, style = "right-angle" }

aliases = ["1x12 right angle header", "1x12 right angle 2.54", "1x12 2.54mm right angle", "12 pin right angle header"]

standard = "Samtec TSW"

[[presets]]

id = "2.54-1x13-RA"

title = "Pin header 1x13, 2.54 mm, right-angle"

params = { pitch = 2.54, rows = 1, pins = 13, style = "right-angle" }

aliases = ["1x13 right angle header", "1x13 right angle 2.54", "1x13 2.54mm right angle", "13 pin right angle header"]

standard = "Samtec TSW"

[[presets]]

id = "2.54-1x14-RA"

title = "Pin header 1x14, 2.54 mm, right-angle"

params = { pitch = 2.54, rows = 1, pins = 14, style = "right-angle" }

aliases = ["1x14 right angle header", "1x14 right angle 2.54", "1x14 2.54mm right angle", "14 pin right angle header"]

standard = "Samtec TSW"

100

101

[[presets]]

102

id = "2.54-1x15-RA"

103

title = "Pin header 1x15, 2.54 mm, right-angle"

104

params = { pitch = 2.54, rows = 1, pins = 15, style = "right-angle" }

105

aliases = ["1x15 right angle header", "1x15 right angle 2.54", "1x15 2.54mm right angle", "15 pin right angle header"]

106

standard = "Samtec TSW"

107

108

[[presets]]

109

id = "2.54-1x16-RA"

110

title = "Pin header 1x16, 2.54 mm, right-angle"

111

params = { pitch = 2.54, rows = 1, pins = 16, style = "right-angle" }

112

aliases = ["1x16 right angle header", "1x16 right angle 2.54", "1x16 2.54mm right angle", "16 pin right angle header"]

113

standard = "Samtec TSW"

114

115

[[presets]]

116

id = "2.54-1x17-RA"

117

title = "Pin header 1x17, 2.54 mm, right-angle"

118

params = { pitch = 2.54, rows = 1, pins = 17, style = "right-angle" }

119

aliases = ["1x17 right angle header", "1x17 right angle 2.54", "1x17 2.54mm right angle", "17 pin right angle header"]

120

standard = "Samtec TSW"

121

122

[[presets]]

123

id = "2.54-1x18-RA"

124

title = "Pin header 1x18, 2.54 mm, right-angle"

125

params = { pitch = 2.54, rows = 1, pins = 18, style = "right-angle" }

126

aliases = ["1x18 right angle header", "1x18 right angle 2.54", "1x18 2.54mm right angle", "18 pin right angle header"]

127

standard = "Samtec TSW"

128

129

[[presets]]

130

id = "2.54-1x19-RA"

131

title = "Pin header 1x19, 2.54 mm, right-angle"

132

params = { pitch = 2.54, rows = 1, pins = 19, style = "right-angle" }

133

aliases = ["1x19 right angle header", "1x19 right angle 2.54", "1x19 2.54mm right angle", "19 pin right angle header"]

134

standard = "Samtec TSW"

135

136

[[presets]]

137

id = "2.54-1x20-RA"

138

title = "Pin header 1x20, 2.54 mm, right-angle"

139

params = { pitch = 2.54, rows = 1, pins = 20, style = "right-angle" }

140

aliases = ["1x20 right angle header", "1x20 right angle 2.54", "1x20 2.54mm right angle", "20 pin right angle header"]

141

standard = "Samtec TSW"

142

143

[[presets]]

144

id = "2.54-1x21-RA"

145

title = "Pin header 1x21, 2.54 mm, right-angle"

146

params = { pitch = 2.54, rows = 1, pins = 21, style = "right-angle" }

147

aliases = ["1x21 right angle header", "1x21 right angle 2.54", "1x21 2.54mm right angle", "21 pin right angle header"]

148

standard = "Samtec TSW"

149

150

[[presets]]

151

id = "2.54-1x22-RA"

152

title = "Pin header 1x22, 2.54 mm, right-angle"

153

params = { pitch = 2.54, rows = 1, pins = 22, style = "right-angle" }

154

aliases = ["1x22 right angle header", "1x22 right angle 2.54", "1x22 2.54mm right angle", "22 pin right angle header"]

155

standard = "Samtec TSW"

156

157

[[presets]]

158

id = "2.54-1x23-RA"

159

title = "Pin header 1x23, 2.54 mm, right-angle"

160

params = { pitch = 2.54, rows = 1, pins = 23, style = "right-angle" }

161

aliases = ["1x23 right angle header", "1x23 right angle 2.54", "1x23 2.54mm right angle", "23 pin right angle header"]

162

standard = "Samtec TSW"

163

164

[[presets]]

165

id = "2.54-1x24-RA"

166

title = "Pin header 1x24, 2.54 mm, right-angle"

167

params = { pitch = 2.54, rows = 1, pins = 24, style = "right-angle" }

168

aliases = ["1x24 right angle header", "1x24 right angle 2.54", "1x24 2.54mm right angle", "24 pin right angle header"]

169

standard = "Samtec TSW"

170

171

[[presets]]

172

id = "2.54-1x25-RA"

173

title = "Pin header 1x25, 2.54 mm, right-angle"

174

params = { pitch = 2.54, rows = 1, pins = 25, style = "right-angle" }

175

aliases = ["1x25 right angle header", "1x25 right angle 2.54", "1x25 2.54mm right angle", "25 pin right angle header"]

176

standard = "Samtec TSW"

177

178

[[presets]]

179

id = "2.54-1x26-RA"

180

title = "Pin header 1x26, 2.54 mm, right-angle"

181

params = { pitch = 2.54, rows = 1, pins = 26, style = "right-angle" }

182

aliases = ["1x26 right angle header", "1x26 right angle 2.54", "1x26 2.54mm right angle", "26 pin right angle header"]

183

standard = "Samtec TSW"

184

185

[[presets]]

186

id = "2.54-1x27-RA"

187

title = "Pin header 1x27, 2.54 mm, right-angle"

188

params = { pitch = 2.54, rows = 1, pins = 27, style = "right-angle" }

189

aliases = ["1x27 right angle header", "1x27 right angle 2.54", "1x27 2.54mm right angle", "27 pin right angle header"]

190

standard = "Samtec TSW"

191

192

[[presets]]

193

id = "2.54-1x28-RA"

194

title = "Pin header 1x28, 2.54 mm, right-angle"

195

params = { pitch = 2.54, rows = 1, pins = 28, style = "right-angle" }

196

aliases = ["1x28 right angle header", "1x28 right angle 2.54", "1x28 2.54mm right angle", "28 pin right angle header"]

197

standard = "Samtec TSW"

198

199

[[presets]]

200

id = "2.54-1x29-RA"

201

title = "Pin header 1x29, 2.54 mm, right-angle"

202

params = { pitch = 2.54, rows = 1, pins = 29, style = "right-angle" }

203

aliases = ["1x29 right angle header", "1x29 right angle 2.54", "1x29 2.54mm right angle", "29 pin right angle header"]

204

standard = "Samtec TSW"

205

206

[[presets]]

207

id = "2.54-1x30-RA"

208

title = "Pin header 1x30, 2.54 mm, right-angle"

209

params = { pitch = 2.54, rows = 1, pins = 30, style = "right-angle" }

210

aliases = ["1x30 right angle header", "1x30 right angle 2.54", "1x30 2.54mm right angle", "30 pin right angle header"]

211

standard = "Samtec TSW"

212

213

[[presets]]

214

id = "2.54-1x31-RA"

215

title = "Pin header 1x31, 2.54 mm, right-angle"

216

params = { pitch = 2.54, rows = 1, pins = 31, style = "right-angle" }

217

aliases = ["1x31 right angle header", "1x31 right angle 2.54", "1x31 2.54mm right angle", "31 pin right angle header"]

218

standard = "Samtec TSW"

219

220

[[presets]]

221

id = "2.54-1x32-RA"

222

title = "Pin header 1x32, 2.54 mm, right-angle"

223

params = { pitch = 2.54, rows = 1, pins = 32, style = "right-angle" }

224

aliases = ["1x32 right angle header", "1x32 right angle 2.54", "1x32 2.54mm right angle", "32 pin right angle header"]

225

standard = "Samtec TSW"

226

227

[[presets]]

228

id = "2.54-1x33-RA"

229

title = "Pin header 1x33, 2.54 mm, right-angle"

230

params = { pitch = 2.54, rows = 1, pins = 33, style = "right-angle" }

231

aliases = ["1x33 right angle header", "1x33 right angle 2.54", "1x33 2.54mm right angle", "33 pin right angle header"]

232

standard = "Samtec TSW"

233

234

[[presets]]

235

id = "2.54-1x34-RA"

236

title = "Pin header 1x34, 2.54 mm, right-angle"

237

params = { pitch = 2.54, rows = 1, pins = 34, style = "right-angle" }

238

aliases = ["1x34 right angle header", "1x34 right angle 2.54", "1x34 2.54mm right angle", "34 pin right angle header"]

239

standard = "Samtec TSW"

240

241

[[presets]]

242

id = "2.54-1x35-RA"

243

title = "Pin header 1x35, 2.54 mm, right-angle"

244

params = { pitch = 2.54, rows = 1, pins = 35, style = "right-angle" }

245

aliases = ["1x35 right angle header", "1x35 right angle 2.54", "1x35 2.54mm right angle", "35 pin right angle header"]

246

standard = "Samtec TSW"

247

248

[[presets]]

249

id = "2.54-1x36-RA"

250

title = "Pin header 1x36, 2.54 mm, right-angle"

251

params = { pitch = 2.54, rows = 1, pins = 36, style = "right-angle" }

252

aliases = ["1x36 right angle header", "1x36 right angle 2.54", "1x36 2.54mm right angle", "36 pin right angle header"]

253

standard = "Samtec TSW"

254

255

[[presets]]

256

id = "2.54-1x37-RA"

257

title = "Pin header 1x37, 2.54 mm, right-angle"

258

params = { pitch = 2.54, rows = 1, pins = 37, style = "right-angle" }

259

aliases = ["1x37 right angle header", "1x37 right angle 2.54", "1x37 2.54mm right angle", "37 pin right angle header"]

260

standard = "Samtec TSW"

261

262

[[presets]]

263

id = "2.54-1x38-RA"

264

title = "Pin header 1x38, 2.54 mm, right-angle"

265

params = { pitch = 2.54, rows = 1, pins = 38, style = "right-angle" }

266

aliases = ["1x38 right angle header", "1x38 right angle 2.54", "1x38 2.54mm right angle", "38 pin right angle header"]

267

standard = "Samtec TSW"

268

269

[[presets]]

270

id = "2.54-1x39-RA"

271

title = "Pin header 1x39, 2.54 mm, right-angle"

272

params = { pitch = 2.54, rows = 1, pins = 39, style = "right-angle" }

273

aliases = ["1x39 right angle header", "1x39 right angle 2.54", "1x39 2.54mm right angle", "39 pin right angle header"]

274

standard = "Samtec TSW"

275

276

[[presets]]

277

id = "2.54-1x40-RA"

278

title = "Pin header 1x40, 2.54 mm, right-angle"

279

params = { pitch = 2.54, rows = 1, pins = 40, style = "right-angle" }

280

aliases = ["1x40 right angle header", "1x40 right angle 2.54", "1x40 2.54mm right angle", "40 pin right angle header"]

281

standard = "Samtec TSW"

282

283

[[presets]]

284

id = "2.54-2x01-RA"

285

title = "Pin header 2x01, 2.54 mm, right-angle"

286

params = { pitch = 2.54, rows = 2, pins = 1, style = "right-angle" }

287

aliases = ["2x01 right angle header", "2x1 right angle header", "2x1 right angle 2.54", "2x01 2.54mm right angle", "2 pin right angle header"]

288

standard = "Samtec TSW"

289

290

[[presets]]

291

id = "2.54-2x02-RA"

292

title = "Pin header 2x02, 2.54 mm, right-angle"

293

params = { pitch = 2.54, rows = 2, pins = 2, style = "right-angle" }

294

aliases = ["2x02 right angle header", "2x2 right angle header", "2x2 right angle 2.54", "2x02 2.54mm right angle", "4 pin right angle header"]

295

standard = "Samtec TSW"

296

297

[[presets]]

298

id = "2.54-2x03-RA"

299

title = "Pin header 2x03, 2.54 mm, right-angle"

300

params = { pitch = 2.54, rows = 2, pins = 3, style = "right-angle" }

301

aliases = ["2x03 right angle header", "2x3 right angle header", "2x3 right angle 2.54", "2x03 2.54mm right angle", "6 pin right angle header"]

302

standard = "Samtec TSW"

303

304

[[presets]]

305

id = "2.54-2x04-RA"

306

title = "Pin header 2x04, 2.54 mm, right-angle"

307

params = { pitch = 2.54, rows = 2, pins = 4, style = "right-angle" }

308

aliases = ["2x04 right angle header", "2x4 right angle header", "2x4 right angle 2.54", "2x04 2.54mm right angle", "8 pin right angle header"]

309

standard = "Samtec TSW"

310

311

[[presets]]

312

id = "2.54-2x05-RA"

313

title = "Pin header 2x05, 2.54 mm, right-angle"

314

params = { pitch = 2.54, rows = 2, pins = 5, style = "right-angle" }

315

aliases = ["2x05 right angle header", "2x5 right angle header", "2x5 right angle 2.54", "2x05 2.54mm right angle", "10 pin right angle header"]

316

standard = "Samtec TSW"

317

318

[[presets]]

319

id = "2.54-2x06-RA"

320

title = "Pin header 2x06, 2.54 mm, right-angle"

321

params = { pitch = 2.54, rows = 2, pins = 6, style = "right-angle" }

322

aliases = ["2x06 right angle header", "2x6 right angle header", "2x6 right angle 2.54", "2x06 2.54mm right angle", "12 pin right angle header"]

323

standard = "Samtec TSW"

324

325

[[presets]]

326

id = "2.54-2x07-RA"

327

title = "Pin header 2x07, 2.54 mm, right-angle"

328

params = { pitch = 2.54, rows = 2, pins = 7, style = "right-angle" }

329

aliases = ["2x07 right angle header", "2x7 right angle header", "2x7 right angle 2.54", "2x07 2.54mm right angle", "14 pin right angle header"]

330

standard = "Samtec TSW"

331

332

[[presets]]

333

id = "2.54-2x08-RA"

334

title = "Pin header 2x08, 2.54 mm, right-angle"

335

params = { pitch = 2.54, rows = 2, pins = 8, style = "right-angle" }

336

aliases = ["2x08 right angle header", "2x8 right angle header", "2x8 right angle 2.54", "2x08 2.54mm right angle", "16 pin right angle header"]

337

standard = "Samtec TSW"

338

339

[[presets]]

340

id = "2.54-2x09-RA"

341

title = "Pin header 2x09, 2.54 mm, right-angle"

342

params = { pitch = 2.54, rows = 2, pins = 9, style = "right-angle" }

343

aliases = ["2x09 right angle header", "2x9 right angle header", "2x9 right angle 2.54", "2x09 2.54mm right angle", "18 pin right angle header"]

344

standard = "Samtec TSW"

345

346

[[presets]]

347

id = "2.54-2x10-RA"

348

title = "Pin header 2x10, 2.54 mm, right-angle"

349

params = { pitch = 2.54, rows = 2, pins = 10, style = "right-angle" }

350

aliases = ["2x10 right angle header", "2x10 right angle 2.54", "2x10 2.54mm right angle", "20 pin right angle header"]

351

standard = "Samtec TSW"

352

353

[[presets]]

354

id = "2.54-2x11-RA"

355

title = "Pin header 2x11, 2.54 mm, right-angle"

356

params = { pitch = 2.54, rows = 2, pins = 11, style = "right-angle" }

357

aliases = ["2x11 right angle header", "2x11 right angle 2.54", "2x11 2.54mm right angle", "22 pin right angle header"]

358

standard = "Samtec TSW"

359

360

[[presets]]

361

id = "2.54-2x12-RA"

362

title = "Pin header 2x12, 2.54 mm, right-angle"

363

params = { pitch = 2.54, rows = 2, pins = 12, style = "right-angle" }

364

aliases = ["2x12 right angle header", "2x12 right angle 2.54", "2x12 2.54mm right angle", "24 pin right angle header"]

365

standard = "Samtec TSW"

366

367

[[presets]]

368

id = "2.54-2x13-RA"

369

title = "Pin header 2x13, 2.54 mm, right-angle"

370

params = { pitch = 2.54, rows = 2, pins = 13, style = "right-angle" }

371

aliases = ["2x13 right angle header", "2x13 right angle 2.54", "2x13 2.54mm right angle", "26 pin right angle header"]

372

standard = "Samtec TSW"

373

374

[[presets]]

375

id = "2.54-2x14-RA"

376

title = "Pin header 2x14, 2.54 mm, right-angle"

377

params = { pitch = 2.54, rows = 2, pins = 14, style = "right-angle" }

378

aliases = ["2x14 right angle header", "2x14 right angle 2.54", "2x14 2.54mm right angle", "28 pin right angle header"]

379

standard = "Samtec TSW"

380

381

[[presets]]

382

id = "2.54-2x15-RA"

383

title = "Pin header 2x15, 2.54 mm, right-angle"

384

params = { pitch = 2.54, rows = 2, pins = 15, style = "right-angle" }

385

aliases = ["2x15 right angle header", "2x15 right angle 2.54", "2x15 2.54mm right angle", "30 pin right angle header"]

386

standard = "Samtec TSW"

387

388

[[presets]]

389

id = "2.54-2x16-RA"

390

title = "Pin header 2x16, 2.54 mm, right-angle"

391

params = { pitch = 2.54, rows = 2, pins = 16, style = "right-angle" }

392

aliases = ["2x16 right angle header", "2x16 right angle 2.54", "2x16 2.54mm right angle", "32 pin right angle header"]

393

standard = "Samtec TSW"

394

395

[[presets]]

396

id = "2.54-2x17-RA"

397

title = "Pin header 2x17, 2.54 mm, right-angle"

398

params = { pitch = 2.54, rows = 2, pins = 17, style = "right-angle" }

399

aliases = ["2x17 right angle header", "2x17 right angle 2.54", "2x17 2.54mm right angle", "34 pin right angle header"]

400

standard = "Samtec TSW"

401

402

[[presets]]

403

id = "2.54-2x18-RA"

404

title = "Pin header 2x18, 2.54 mm, right-angle"

405

params = { pitch = 2.54, rows = 2, pins = 18, style = "right-angle" }

406

aliases = ["2x18 right angle header", "2x18 right angle 2.54", "2x18 2.54mm right angle", "36 pin right angle header"]

407

standard = "Samtec TSW"

408

409

[[presets]]

410

id = "2.54-2x19-RA"

411

title = "Pin header 2x19, 2.54 mm, right-angle"

412

params = { pitch = 2.54, rows = 2, pins = 19, style = "right-angle" }

413

aliases = ["2x19 right angle header", "2x19 right angle 2.54", "2x19 2.54mm right angle", "38 pin right angle header"]

414

standard = "Samtec TSW"

415

416

[[presets]]

417

id = "2.54-2x20-RA"

418

title = "Pin header 2x20, 2.54 mm, right-angle"

419

params = { pitch = 2.54, rows = 2, pins = 20, style = "right-angle" }

420

aliases = ["2x20 right angle header", "2x20 right angle 2.54", "2x20 2.54mm right angle", "40 pin right angle header"]

421

standard = "Samtec TSW"

422

423

[[presets]]

424

id = "2.54-2x21-RA"

425

title = "Pin header 2x21, 2.54 mm, right-angle"

426

params = { pitch = 2.54, rows = 2, pins = 21, style = "right-angle" }

427

aliases = ["2x21 right angle header", "2x21 right angle 2.54", "2x21 2.54mm right angle", "42 pin right angle header"]

428

standard = "Samtec TSW"

429

430

[[presets]]

431

id = "2.54-2x22-RA"

432

title = "Pin header 2x22, 2.54 mm, right-angle"

433

params = { pitch = 2.54, rows = 2, pins = 22, style = "right-angle" }

434

aliases = ["2x22 right angle header", "2x22 right angle 2.54", "2x22 2.54mm right angle", "44 pin right angle header"]

435

standard = "Samtec TSW"

436

437

[[presets]]

438

id = "2.54-2x23-RA"

439

title = "Pin header 2x23, 2.54 mm, right-angle"

440

params = { pitch = 2.54, rows = 2, pins = 23, style = "right-angle" }

441

aliases = ["2x23 right angle header", "2x23 right angle 2.54", "2x23 2.54mm right angle", "46 pin right angle header"]

442

standard = "Samtec TSW"

443

444

[[presets]]

445

id = "2.54-2x24-RA"

446

title = "Pin header 2x24, 2.54 mm, right-angle"

447

params = { pitch = 2.54, rows = 2, pins = 24, style = "right-angle" }

448

aliases = ["2x24 right angle header", "2x24 right angle 2.54", "2x24 2.54mm right angle", "48 pin right angle header"]

449

standard = "Samtec TSW"

450

451

[[presets]]

452

id = "2.54-2x25-RA"

453

title = "Pin header 2x25, 2.54 mm, right-angle"

454

params = { pitch = 2.54, rows = 2, pins = 25, style = "right-angle" }

455

aliases = ["2x25 right angle header", "2x25 right angle 2.54", "2x25 2.54mm right angle", "50 pin right angle header"]

456

standard = "Samtec TSW"

457

458

[[presets]]

459

id = "2.54-2x26-RA"

460

title = "Pin header 2x26, 2.54 mm, right-angle"

461

params = { pitch = 2.54, rows = 2, pins = 26, style = "right-angle" }

462

aliases = ["2x26 right angle header", "2x26 right angle 2.54", "2x26 2.54mm right angle", "52 pin right angle header"]

463

standard = "Samtec TSW"

464

465

[[presets]]

466

id = "2.54-2x27-RA"

467

title = "Pin header 2x27, 2.54 mm, right-angle"

468

params = { pitch = 2.54, rows = 2, pins = 27, style = "right-angle" }

469

aliases = ["2x27 right angle header", "2x27 right angle 2.54", "2x27 2.54mm right angle", "54 pin right angle header"]

470

standard = "Samtec TSW"

471

472

[[presets]]

473

id = "2.54-2x28-RA"

474

title = "Pin header 2x28, 2.54 mm, right-angle"

475

params = { pitch = 2.54, rows = 2, pins = 28, style = "right-angle" }

476

aliases = ["2x28 right angle header", "2x28 right angle 2.54", "2x28 2.54mm right angle", "56 pin right angle header"]

477

standard = "Samtec TSW"

478

479

[[presets]]

480

id = "2.54-2x29-RA"

481

title = "Pin header 2x29, 2.54 mm, right-angle"

482

params = { pitch = 2.54, rows = 2, pins = 29, style = "right-angle" }

483

aliases = ["2x29 right angle header", "2x29 right angle 2.54", "2x29 2.54mm right angle", "58 pin right angle header"]

484

standard = "Samtec TSW"

485

486

[[presets]]

487

id = "2.54-2x30-RA"

488

title = "Pin header 2x30, 2.54 mm, right-angle"

489

params = { pitch = 2.54, rows = 2, pins = 30, style = "right-angle" }

490

aliases = ["2x30 right angle header", "2x30 right angle 2.54", "2x30 2.54mm right angle", "60 pin right angle header"]

491

standard = "Samtec TSW"

492

493

[[presets]]

494

id = "2.54-2x31-RA"

495

title = "Pin header 2x31, 2.54 mm, right-angle"

496

params = { pitch = 2.54, rows = 2, pins = 31, style = "right-angle" }

497

aliases = ["2x31 right angle header", "2x31 right angle 2.54", "2x31 2.54mm right angle", "62 pin right angle header"]

498

standard = "Samtec TSW"

499

500

[[presets]]

501

id = "2.54-2x32-RA"

502

title = "Pin header 2x32, 2.54 mm, right-angle"

503

params = { pitch = 2.54, rows = 2, pins = 32, style = "right-angle" }

504

aliases = ["2x32 right angle header", "2x32 right angle 2.54", "2x32 2.54mm right angle", "64 pin right angle header"]

505

standard = "Samtec TSW"

506

507

[[presets]]

508

id = "2.54-2x33-RA"

509

title = "Pin header 2x33, 2.54 mm, right-angle"

510

params = { pitch = 2.54, rows = 2, pins = 33, style = "right-angle" }

511

aliases = ["2x33 right angle header", "2x33 right angle 2.54", "2x33 2.54mm right angle", "66 pin right angle header"]

512

standard = "Samtec TSW"

513

514

[[presets]]

515

id = "2.54-2x34-RA"

516

title = "Pin header 2x34, 2.54 mm, right-angle"

517

params = { pitch = 2.54, rows = 2, pins = 34, style = "right-angle" }

518

aliases = ["2x34 right angle header", "2x34 right angle 2.54", "2x34 2.54mm right angle", "68 pin right angle header"]

519

standard = "Samtec TSW"

520

521

[[presets]]

522

id = "2.54-2x35-RA"

523

title = "Pin header 2x35, 2.54 mm, right-angle"

524

params = { pitch = 2.54, rows = 2, pins = 35, style = "right-angle" }

525

aliases = ["2x35 right angle header", "2x35 right angle 2.54", "2x35 2.54mm right angle", "70 pin right angle header"]

526

standard = "Samtec TSW"

527

528

[[presets]]

529

id = "2.54-2x36-RA"

530

title = "Pin header 2x36, 2.54 mm, right-angle"

531

params = { pitch = 2.54, rows = 2, pins = 36, style = "right-angle" }

532

aliases = ["2x36 right angle header", "2x36 right angle 2.54", "2x36 2.54mm right angle", "72 pin right angle header"]

533

standard = "Samtec TSW"

534

535

[[presets]]

536

id = "2.54-2x37-RA"

537

title = "Pin header 2x37, 2.54 mm, right-angle"

538

params = { pitch = 2.54, rows = 2, pins = 37, style = "right-angle" }

539

aliases = ["2x37 right angle header", "2x37 right angle 2.54", "2x37 2.54mm right angle", "74 pin right angle header"]

540

standard = "Samtec TSW"

541

542

[[presets]]

543

id = "2.54-2x38-RA"

544

title = "Pin header 2x38, 2.54 mm, right-angle"

545

params = { pitch = 2.54, rows = 2, pins = 38, style = "right-angle" }

546

aliases = ["2x38 right angle header", "2x38 right angle 2.54", "2x38 2.54mm right angle", "76 pin right angle header"]

547

standard = "Samtec TSW"

548

549

[[presets]]

550

id = "2.54-2x39-RA"

551

title = "Pin header 2x39, 2.54 mm, right-angle"

552

params = { pitch = 2.54, rows = 2, pins = 39, style = "right-angle" }

553

aliases = ["2x39 right angle header", "2x39 right angle 2.54", "2x39 2.54mm right angle", "78 pin right angle header"]

554

standard = "Samtec TSW"

555

556

[[presets]]

557

id = "2.54-2x40-RA"

558

title = "Pin header 2x40, 2.54 mm, right-angle"

559

params = { pitch = 2.54, rows = 2, pins = 40, style = "right-angle" }

560

aliases = ["2x40 right angle header", "2x40 right angle 2.54", "2x40 2.54mm right angle", "80 pin right angle header"]

561

standard = "Samtec TSW"

562

563

[[presets]]

564

id = "2.54-1x01"

565

title = "Pin header 1x01, 2.54 mm"

566

params = { pitch = 2.54, rows = 1, pins = 1 }

567

aliases = ["1x01 2.54mm header", "1x1 header 2.54mm", "1x1 2.54", "1x01 pin header", "1x1 pin header", "1 pin header 2.54", "1 pin header 2.54mm", "2.54mm 1x1"]

568

standard = "Samtec TSW"

569

570

[[presets]]

571

id = "2.54-1x02"

572

title = "Pin header 1x02, 2.54 mm"

573

params = { pitch = 2.54, rows = 1, pins = 2 }

574

aliases = ["1x02 2.54mm header", "1x2 header 2.54mm", "1x2 2.54", "1x02 pin header", "1x2 pin header", "2 pin header 2.54", "2 pin header 2.54mm", "2.54mm 1x2"]

575

standard = "Samtec TSW"

576

577

[[presets]]

578

id = "2.54-1x03"

579

title = "Pin header 1x03, 2.54 mm"

580

params = { pitch = 2.54, rows = 1, pins = 3 }

581

aliases = ["1x03 2.54mm header", "1x3 header 2.54mm", "1x3 2.54", "1x03 pin header", "1x3 pin header", "3 pin header 2.54", "3 pin header 2.54mm", "2.54mm 1x3"]

582

standard = "Samtec TSW"

583

584

[[presets]]

585

id = "2.54-1x04"

586

title = "Pin header 1x04, 2.54 mm"

587

params = { pitch = 2.54, rows = 1, pins = 4 }

588

aliases = ["1x04 2.54mm header", "1x4 header 2.54mm", "1x4 2.54", "1x04 pin header", "1x4 pin header", "4 pin header 2.54", "4 pin header 2.54mm", "2.54mm 1x4"]

589

standard = "Samtec TSW"

590

591

[[presets]]

592

id = "2.54-1x05"

593

title = "Pin header 1x05, 2.54 mm"

594

params = { pitch = 2.54, rows = 1, pins = 5 }

595

aliases = ["1x05 2.54mm header", "1x5 header 2.54mm", "1x5 2.54", "1x05 pin header", "1x5 pin header", "5 pin header 2.54", "5 pin header 2.54mm", "2.54mm 1x5"]

596

standard = "Samtec TSW"

597

598

[[presets]]

599

id = "2.54-1x06"

600

title = "Pin header 1x06, 2.54 mm"

601

params = { pitch = 2.54, rows = 1, pins = 6 }

602

aliases = ["1x06 2.54mm header", "1x6 header 2.54mm", "1x6 2.54", "1x06 pin header", "1x6 pin header", "6 pin header 2.54", "6 pin header 2.54mm", "2.54mm 1x6"]

603

standard = "Samtec TSW"

604

605

[[presets]]

606

id = "2.54-1x07"

607

title = "Pin header 1x07, 2.54 mm"

608

params = { pitch = 2.54, rows = 1, pins = 7 }

609

aliases = ["1x07 2.54mm header", "1x7 header 2.54mm", "1x7 2.54", "1x07 pin header", "1x7 pin header", "7 pin header 2.54", "7 pin header 2.54mm", "2.54mm 1x7"]

610

standard = "Samtec TSW"

611

612

[[presets]]

613

id = "2.54-1x08"

614

title = "Pin header 1x08, 2.54 mm"

615

params = { pitch = 2.54, rows = 1, pins = 8 }

616

aliases = ["1x08 2.54mm header", "1x8 header 2.54mm", "1x8 2.54", "1x08 pin header", "1x8 pin header", "8 pin header 2.54", "8 pin header 2.54mm", "2.54mm 1x8"]

617

standard = "Samtec TSW"

618

619

[[presets]]

620

id = "2.54-1x09"

621

title = "Pin header 1x09, 2.54 mm"

622

params = { pitch = 2.54, rows = 1, pins = 9 }

623

aliases = ["1x09 2.54mm header", "1x9 header 2.54mm", "1x9 2.54", "1x09 pin header", "1x9 pin header", "9 pin header 2.54", "9 pin header 2.54mm", "2.54mm 1x9"]

624

standard = "Samtec TSW"

625

626

[[presets]]

627

id = "2.54-1x10"

628

title = "Pin header 1x10, 2.54 mm"

629

params = { pitch = 2.54, rows = 1, pins = 10 }

630

aliases = ["1x10 2.54mm header", "1x10 header 2.54mm", "1x10 2.54", "1x10 pin header", "10 pin header 2.54", "10 pin header 2.54mm", "2.54mm 1x10"]

631

standard = "Samtec TSW"

632

633

[[presets]]

634

id = "2.54-1x11"

635

title = "Pin header 1x11, 2.54 mm"

636

params = { pitch = 2.54, rows = 1, pins = 11 }

637

aliases = ["1x11 2.54mm header", "1x11 header 2.54mm", "1x11 2.54", "1x11 pin header", "11 pin header 2.54", "11 pin header 2.54mm", "2.54mm 1x11"]

638

standard = "Samtec TSW"

639

640

[[presets]]

641

id = "2.54-1x12"

642

title = "Pin header 1x12, 2.54 mm"

643

params = { pitch = 2.54, rows = 1, pins = 12 }

644

aliases = ["1x12 2.54mm header", "1x12 header 2.54mm", "1x12 2.54", "1x12 pin header", "12 pin header 2.54", "12 pin header 2.54mm", "2.54mm 1x12"]

645

standard = "Samtec TSW"

646

647

[[presets]]

648

id = "2.54-1x13"

649

title = "Pin header 1x13, 2.54 mm"

650

params = { pitch = 2.54, rows = 1, pins = 13 }

651

aliases = ["1x13 2.54mm header", "1x13 header 2.54mm", "1x13 2.54", "1x13 pin header", "13 pin header 2.54", "13 pin header 2.54mm", "2.54mm 1x13"]

652

standard = "Samtec TSW"

653

654

[[presets]]

655

id = "2.54-1x14"

656

title = "Pin header 1x14, 2.54 mm"

657

params = { pitch = 2.54, rows = 1, pins = 14 }

658

aliases = ["1x14 2.54mm header", "1x14 header 2.54mm", "1x14 2.54", "1x14 pin header", "14 pin header 2.54", "14 pin header 2.54mm", "2.54mm 1x14"]

659

standard = "Samtec TSW"

660

661

[[presets]]

662

id = "2.54-1x15"

663

title = "Pin header 1x15, 2.54 mm"

664

params = { pitch = 2.54, rows = 1, pins = 15 }

665

aliases = ["1x15 2.54mm header", "1x15 header 2.54mm", "1x15 2.54", "1x15 pin header", "15 pin header 2.54", "15 pin header 2.54mm", "2.54mm 1x15"]

666

standard = "Samtec TSW"

667

668

[[presets]]

669

id = "2.54-1x16"

670

title = "Pin header 1x16, 2.54 mm"

671

params = { pitch = 2.54, rows = 1, pins = 16 }

672

aliases = ["1x16 2.54mm header", "1x16 header 2.54mm", "1x16 2.54", "1x16 pin header", "16 pin header 2.54", "16 pin header 2.54mm", "2.54mm 1x16"]

673

standard = "Samtec TSW"

674

675

[[presets]]

676

id = "2.54-1x17"

677

title = "Pin header 1x17, 2.54 mm"

678

params = { pitch = 2.54, rows = 1, pins = 17 }

679

aliases = ["1x17 2.54mm header", "1x17 header 2.54mm", "1x17 2.54", "1x17 pin header", "17 pin header 2.54", "17 pin header 2.54mm", "2.54mm 1x17"]

680

standard = "Samtec TSW"

681

682

[[presets]]

683

id = "2.54-1x18"

684

title = "Pin header 1x18, 2.54 mm"

685

params = { pitch = 2.54, rows = 1, pins = 18 }

686

aliases = ["1x18 2.54mm header", "1x18 header 2.54mm", "1x18 2.54", "1x18 pin header", "18 pin header 2.54", "18 pin header 2.54mm", "2.54mm 1x18"]

687

standard = "Samtec TSW"

688

689

[[presets]]

690

id = "2.54-1x19"

691

title = "Pin header 1x19, 2.54 mm"

692

params = { pitch = 2.54, rows = 1, pins = 19 }

693

aliases = ["1x19 2.54mm header", "1x19 header 2.54mm", "1x19 2.54", "1x19 pin header", "19 pin header 2.54", "19 pin header 2.54mm", "2.54mm 1x19"]

694

standard = "Samtec TSW"

695

696

[[presets]]

697

id = "2.54-1x20"

698

title = "Pin header 1x20, 2.54 mm"

699

params = { pitch = 2.54, rows = 1, pins = 20 }

700

aliases = ["1x20 2.54mm header", "1x20 header 2.54mm", "1x20 2.54", "1x20 pin header", "20 pin header 2.54", "20 pin header 2.54mm", "2.54mm 1x20"]

701

standard = "Samtec TSW"

702

703

[[presets]]

704

id = "2.54-1x21"

705

title = "Pin header 1x21, 2.54 mm"

706

params = { pitch = 2.54, rows = 1, pins = 21 }

707

aliases = ["1x21 2.54mm header", "1x21 header 2.54mm", "1x21 2.54", "1x21 pin header", "21 pin header 2.54", "21 pin header 2.54mm", "2.54mm 1x21"]

708

standard = "Samtec TSW"

709

710

[[presets]]

711

id = "2.54-1x22"

712

title = "Pin header 1x22, 2.54 mm"

713

params = { pitch = 2.54, rows = 1, pins = 22 }

714

aliases = ["1x22 2.54mm header", "1x22 header 2.54mm", "1x22 2.54", "1x22 pin header", "22 pin header 2.54", "22 pin header 2.54mm", "2.54mm 1x22"]

715

standard = "Samtec TSW"

716

717

[[presets]]

718

id = "2.54-1x23"

719

title = "Pin header 1x23, 2.54 mm"

720

params = { pitch = 2.54, rows = 1, pins = 23 }

721

aliases = ["1x23 2.54mm header", "1x23 header 2.54mm", "1x23 2.54", "1x23 pin header", "23 pin header 2.54", "23 pin header 2.54mm", "2.54mm 1x23"]

722

standard = "Samtec TSW"

723

724

[[presets]]

725

id = "2.54-1x24"

726

title = "Pin header 1x24, 2.54 mm"

727

params = { pitch = 2.54, rows = 1, pins = 24 }

728

aliases = ["1x24 2.54mm header", "1x24 header 2.54mm", "1x24 2.54", "1x24 pin header", "24 pin header 2.54", "24 pin header 2.54mm", "2.54mm 1x24"]

729

standard = "Samtec TSW"

730

731

[[presets]]

732

id = "2.54-1x25"

733

title = "Pin header 1x25, 2.54 mm"

734

params = { pitch = 2.54, rows = 1, pins = 25 }

735

aliases = ["1x25 2.54mm header", "1x25 header 2.54mm", "1x25 2.54", "1x25 pin header", "25 pin header 2.54", "25 pin header 2.54mm", "2.54mm 1x25"]

736

standard = "Samtec TSW"

737

738

[[presets]]

739

id = "2.54-1x26"

740

title = "Pin header 1x26, 2.54 mm"

741

params = { pitch = 2.54, rows = 1, pins = 26 }

742

aliases = ["1x26 2.54mm header", "1x26 header 2.54mm", "1x26 2.54", "1x26 pin header", "26 pin header 2.54", "26 pin header 2.54mm", "2.54mm 1x26"]

743

standard = "Samtec TSW"

744

745

[[presets]]

746

id = "2.54-1x27"

747

title = "Pin header 1x27, 2.54 mm"

748

params = { pitch = 2.54, rows = 1, pins = 27 }

749

aliases = ["1x27 2.54mm header", "1x27 header 2.54mm", "1x27 2.54", "1x27 pin header", "27 pin header 2.54", "27 pin header 2.54mm", "2.54mm 1x27"]

750

standard = "Samtec TSW"

751

752

[[presets]]

753

id = "2.54-1x28"

754

title = "Pin header 1x28, 2.54 mm"

755

params = { pitch = 2.54, rows = 1, pins = 28 }

756

aliases = ["1x28 2.54mm header", "1x28 header 2.54mm", "1x28 2.54", "1x28 pin header", "28 pin header 2.54", "28 pin header 2.54mm", "2.54mm 1x28"]

757

standard = "Samtec TSW"

758

759

[[presets]]

760

id = "2.54-1x29"

761

title = "Pin header 1x29, 2.54 mm"

762

params = { pitch = 2.54, rows = 1, pins = 29 }

763

aliases = ["1x29 2.54mm header", "1x29 header 2.54mm", "1x29 2.54", "1x29 pin header", "29 pin header 2.54", "29 pin header 2.54mm", "2.54mm 1x29"]

764

standard = "Samtec TSW"

765

766

[[presets]]

767

id = "2.54-1x30"

768

title = "Pin header 1x30, 2.54 mm"

769

params = { pitch = 2.54, rows = 1, pins = 30 }

770

aliases = ["1x30 2.54mm header", "1x30 header 2.54mm", "1x30 2.54", "1x30 pin header", "30 pin header 2.54", "30 pin header 2.54mm", "2.54mm 1x30"]

771

standard = "Samtec TSW"

772

773

[[presets]]

774

id = "2.54-1x31"

775

title = "Pin header 1x31, 2.54 mm"

776

params = { pitch = 2.54, rows = 1, pins = 31 }

777

aliases = ["1x31 2.54mm header", "1x31 header 2.54mm", "1x31 2.54", "1x31 pin header", "31 pin header 2.54", "31 pin header 2.54mm", "2.54mm 1x31"]

778

standard = "Samtec TSW"

779

780

[[presets]]

781

id = "2.54-1x32"

782

title = "Pin header 1x32, 2.54 mm"

783

params = { pitch = 2.54, rows = 1, pins = 32 }

784

aliases = ["1x32 2.54mm header", "1x32 header 2.54mm", "1x32 2.54", "1x32 pin header", "32 pin header 2.54", "32 pin header 2.54mm", "2.54mm 1x32"]

785

standard = "Samtec TSW"

786

787

[[presets]]

788

id = "2.54-1x33"

789

title = "Pin header 1x33, 2.54 mm"

790

params = { pitch = 2.54, rows = 1, pins = 33 }

791

aliases = ["1x33 2.54mm header", "1x33 header 2.54mm", "1x33 2.54", "1x33 pin header", "33 pin header 2.54", "33 pin header 2.54mm", "2.54mm 1x33"]

792

standard = "Samtec TSW"

793

794

[[presets]]

795

id = "2.54-1x34"

796

title = "Pin header 1x34, 2.54 mm"

797

params = { pitch = 2.54, rows = 1, pins = 34 }

798

aliases = ["1x34 2.54mm header", "1x34 header 2.54mm", "1x34 2.54", "1x34 pin header", "34 pin header 2.54", "34 pin header 2.54mm", "2.54mm 1x34"]

799

standard = "Samtec TSW"

800

801

[[presets]]

802

id = "2.54-1x35"

803

title = "Pin header 1x35, 2.54 mm"

804

params = { pitch = 2.54, rows = 1, pins = 35 }

805

aliases = ["1x35 2.54mm header", "1x35 header 2.54mm", "1x35 2.54", "1x35 pin header", "35 pin header 2.54", "35 pin header 2.54mm", "2.54mm 1x35"]

806

standard = "Samtec TSW"

807

808

[[presets]]

809

id = "2.54-1x36"

810

title = "Pin header 1x36, 2.54 mm"

811

params = { pitch = 2.54, rows = 1, pins = 36 }

812

aliases = ["1x36 2.54mm header", "1x36 header 2.54mm", "1x36 2.54", "1x36 pin header", "36 pin header 2.54", "36 pin header 2.54mm", "2.54mm 1x36"]

813

standard = "Samtec TSW"

814

815

[[presets]]

816

id = "2.54-1x37"

817

title = "Pin header 1x37, 2.54 mm"

818

params = { pitch = 2.54, rows = 1, pins = 37 }

819

aliases = ["1x37 2.54mm header", "1x37 header 2.54mm", "1x37 2.54", "1x37 pin header", "37 pin header 2.54", "37 pin header 2.54mm", "2.54mm 1x37"]

820

standard = "Samtec TSW"

821

822

[[presets]]

823

id = "2.54-1x38"

824

title = "Pin header 1x38, 2.54 mm"

825

params = { pitch = 2.54, rows = 1, pins = 38 }

826

aliases = ["1x38 2.54mm header", "1x38 header 2.54mm", "1x38 2.54", "1x38 pin header", "38 pin header 2.54", "38 pin header 2.54mm", "2.54mm 1x38"]

827

standard = "Samtec TSW"

828

829

[[presets]]

830

id = "2.54-1x39"

831

title = "Pin header 1x39, 2.54 mm"

832

params = { pitch = 2.54, rows = 1, pins = 39 }

833

aliases = ["1x39 2.54mm header", "1x39 header 2.54mm", "1x39 2.54", "1x39 pin header", "39 pin header 2.54", "39 pin header 2.54mm", "2.54mm 1x39"]

834

standard = "Samtec TSW"

835

836

[[presets]]

837

id = "2.54-1x40"

838

title = "Pin header 1x40, 2.54 mm"

839

params = { pitch = 2.54, rows = 1, pins = 40 }

840

aliases = ["1x40 2.54mm header", "1x40 header 2.54mm", "1x40 2.54", "1x40 pin header", "40 pin header 2.54", "40 pin header 2.54mm", "2.54mm 1x40"]

841

standard = "Samtec TSW"

842

843

[[presets]]

844

id = "2.54-2x01"

845

title = "Pin header 2x01, 2.54 mm"

846

params = { pitch = 2.54, rows = 2, pins = 1 }

847

aliases = ["2x01 2.54mm header", "2x1 header 2.54mm", "2x1 2.54", "2x01 pin header", "2x1 pin header", "2 pin header 2.54", "2 pin header 2.54mm", "2.54mm 2x1"]

848

standard = "Samtec TSW"

849

850

[[presets]]

851

id = "2.54-2x02"

852

title = "Pin header 2x02, 2.54 mm"

853

params = { pitch = 2.54, rows = 2, pins = 2 }

854

aliases = ["2x02 2.54mm header", "2x2 header 2.54mm", "2x2 2.54", "2x02 pin header", "2x2 pin header", "4 pin header 2.54", "4 pin header 2.54mm", "2.54mm 2x2"]

855

standard = "Samtec TSW"

856

857

[[presets]]

858

id = "2.54-2x03"

859

title = "Pin header 2x03, 2.54 mm"

860

params = { pitch = 2.54, rows = 2, pins = 3 }

861

aliases = ["2x03 2.54mm header", "2x3 header 2.54mm", "2x3 2.54", "2x03 pin header", "2x3 pin header", "6 pin header 2.54", "6 pin header 2.54mm", "2.54mm 2x3"]

862

standard = "Samtec TSW"

863

864

[[presets]]

865

id = "2.54-2x04"

866

title = "Pin header 2x04, 2.54 mm"

867

params = { pitch = 2.54, rows = 2, pins = 4 }

868

aliases = ["2x04 2.54mm header", "2x4 header 2.54mm", "2x4 2.54", "2x04 pin header", "2x4 pin header", "8 pin header 2.54", "8 pin header 2.54mm", "2.54mm 2x4"]

869

standard = "Samtec TSW"

870

871

[[presets]]

872

id = "2.54-2x05"

873

title = "Pin header 2x05, 2.54 mm"

874

params = { pitch = 2.54, rows = 2, pins = 5 }

875

aliases = ["2x05 2.54mm header", "2x5 header 2.54mm", "2x5 2.54", "2x05 pin header", "2x5 pin header", "10 pin header 2.54", "10 pin header 2.54mm", "2.54mm 2x5"]

876

standard = "Samtec TSW"

877

878

[[presets]]

879

id = "2.54-2x06"

880

title = "Pin header 2x06, 2.54 mm"

881

params = { pitch = 2.54, rows = 2, pins = 6 }

882

aliases = ["2x06 2.54mm header", "2x6 header 2.54mm", "2x6 2.54", "2x06 pin header", "2x6 pin header", "12 pin header 2.54", "12 pin header 2.54mm", "2.54mm 2x6"]

883

standard = "Samtec TSW"

884

885

[[presets]]

886

id = "2.54-2x07"

887

title = "Pin header 2x07, 2.54 mm"

888

params = { pitch = 2.54, rows = 2, pins = 7 }

889

aliases = ["2x07 2.54mm header", "2x7 header 2.54mm", "2x7 2.54", "2x07 pin header", "2x7 pin header", "14 pin header 2.54", "14 pin header 2.54mm", "2.54mm 2x7"]

890

standard = "Samtec TSW"

891

892

[[presets]]

893

id = "2.54-2x08"

894

title = "Pin header 2x08, 2.54 mm"

895

params = { pitch = 2.54, rows = 2, pins = 8 }

896

aliases = ["2x08 2.54mm header", "2x8 header 2.54mm", "2x8 2.54", "2x08 pin header", "2x8 pin header", "16 pin header 2.54", "16 pin header 2.54mm", "2.54mm 2x8"]

897

standard = "Samtec TSW"

898

899

[[presets]]

900

id = "2.54-2x09"

901

title = "Pin header 2x09, 2.54 mm"

902

params = { pitch = 2.54, rows = 2, pins = 9 }

903

aliases = ["2x09 2.54mm header", "2x9 header 2.54mm", "2x9 2.54", "2x09 pin header", "2x9 pin header", "18 pin header 2.54", "18 pin header 2.54mm", "2.54mm 2x9"]

904

standard = "Samtec TSW"

905

906

[[presets]]

907

id = "2.54-2x10"

908

title = "Pin header 2x10, 2.54 mm"

909

params = { pitch = 2.54, rows = 2, pins = 10 }

910

aliases = ["2x10 2.54mm header", "2x10 header 2.54mm", "2x10 2.54", "2x10 pin header", "20 pin header 2.54", "20 pin header 2.54mm", "2.54mm 2x10"]

911

standard = "Samtec TSW"

912

913

[[presets]]

914

id = "2.54-2x11"

915

title = "Pin header 2x11, 2.54 mm"

916

params = { pitch = 2.54, rows = 2, pins = 11 }

917

aliases = ["2x11 2.54mm header", "2x11 header 2.54mm", "2x11 2.54", "2x11 pin header", "22 pin header 2.54", "22 pin header 2.54mm", "2.54mm 2x11"]

918

standard = "Samtec TSW"

919

920

[[presets]]

921

id = "2.54-2x12"

922

title = "Pin header 2x12, 2.54 mm"

923

params = { pitch = 2.54, rows = 2, pins = 12 }

924

aliases = ["2x12 2.54mm header", "2x12 header 2.54mm", "2x12 2.54", "2x12 pin header", "24 pin header 2.54", "24 pin header 2.54mm", "2.54mm 2x12"]

925

standard = "Samtec TSW"

926

927

[[presets]]

928

id = "2.54-2x13"

929

title = "Pin header 2x13, 2.54 mm"

930

params = { pitch = 2.54, rows = 2, pins = 13 }

931

aliases = ["2x13 2.54mm header", "2x13 header 2.54mm", "2x13 2.54", "2x13 pin header", "26 pin header 2.54", "26 pin header 2.54mm", "2.54mm 2x13"]

932

standard = "Samtec TSW"

933

934

[[presets]]

935

id = "2.54-2x14"

936

title = "Pin header 2x14, 2.54 mm"

937

params = { pitch = 2.54, rows = 2, pins = 14 }

938

aliases = ["2x14 2.54mm header", "2x14 header 2.54mm", "2x14 2.54", "2x14 pin header", "28 pin header 2.54", "28 pin header 2.54mm", "2.54mm 2x14"]

939

standard = "Samtec TSW"

940

941

[[presets]]

942

id = "2.54-2x15"

943

title = "Pin header 2x15, 2.54 mm"

944

params = { pitch = 2.54, rows = 2, pins = 15 }

945

aliases = ["2x15 2.54mm header", "2x15 header 2.54mm", "2x15 2.54", "2x15 pin header", "30 pin header 2.54", "30 pin header 2.54mm", "2.54mm 2x15"]

946

standard = "Samtec TSW"

947

948

[[presets]]

949

id = "2.54-2x16"

950

title = "Pin header 2x16, 2.54 mm"

951

params = { pitch = 2.54, rows = 2, pins = 16 }

952

aliases = ["2x16 2.54mm header", "2x16 header 2.54mm", "2x16 2.54", "2x16 pin header", "32 pin header 2.54", "32 pin header 2.54mm", "2.54mm 2x16"]

953

standard = "Samtec TSW"

954

955

[[presets]]

956

id = "2.54-2x17"

957

title = "Pin header 2x17, 2.54 mm"

958

params = { pitch = 2.54, rows = 2, pins = 17 }

959

aliases = ["2x17 2.54mm header", "2x17 header 2.54mm", "2x17 2.54", "2x17 pin header", "34 pin header 2.54", "34 pin header 2.54mm", "2.54mm 2x17"]

960

standard = "Samtec TSW"

961

962

[[presets]]

963

id = "2.54-2x18"

964

title = "Pin header 2x18, 2.54 mm"

965

params = { pitch = 2.54, rows = 2, pins = 18 }

966

aliases = ["2x18 2.54mm header", "2x18 header 2.54mm", "2x18 2.54", "2x18 pin header", "36 pin header 2.54", "36 pin header 2.54mm", "2.54mm 2x18"]

967

standard = "Samtec TSW"

968

969

[[presets]]

970

id = "2.54-2x19"

971

title = "Pin header 2x19, 2.54 mm"

972

params = { pitch = 2.54, rows = 2, pins = 19 }

973

aliases = ["2x19 2.54mm header", "2x19 header 2.54mm", "2x19 2.54", "2x19 pin header", "38 pin header 2.54", "38 pin header 2.54mm", "2.54mm 2x19"]

974

standard = "Samtec TSW"

975

976

[[presets]]

977

id = "2.54-2x20"

978

title = "Pin header 2x20, 2.54 mm"

979

params = { pitch = 2.54, rows = 2, pins = 20 }

980

aliases = ["2x20 2.54mm header", "2x20 header 2.54mm", "2x20 2.54", "2x20 pin header", "40 pin header 2.54", "40 pin header 2.54mm", "2.54mm 2x20"]

981

standard = "Samtec TSW"

982

983

[[presets]]

984

id = "2.54-2x21"

985

title = "Pin header 2x21, 2.54 mm"

986

params = { pitch = 2.54, rows = 2, pins = 21 }

987

aliases = ["2x21 2.54mm header", "2x21 header 2.54mm", "2x21 2.54", "2x21 pin header", "42 pin header 2.54", "42 pin header 2.54mm", "2.54mm 2x21"]

988

standard = "Samtec TSW"

989

990

[[presets]]

991

id = "2.54-2x22"

992

title = "Pin header 2x22, 2.54 mm"

993

params = { pitch = 2.54, rows = 2, pins = 22 }

994

aliases = ["2x22 2.54mm header", "2x22 header 2.54mm", "2x22 2.54", "2x22 pin header", "44 pin header 2.54", "44 pin header 2.54mm", "2.54mm 2x22"]

995

standard = "Samtec TSW"

996

997

[[presets]]

998

id = "2.54-2x23"

999

title = "Pin header 2x23, 2.54 mm"

1000

params = { pitch = 2.54, rows = 2, pins = 23 }

1001

aliases = ["2x23 2.54mm header", "2x23 header 2.54mm", "2x23 2.54", "2x23 pin header", "46 pin header 2.54", "46 pin header 2.54mm", "2.54mm 2x23"]

1002

standard = "Samtec TSW"

1003

1004

[[presets]]

1005

id = "2.54-2x24"

1006

title = "Pin header 2x24, 2.54 mm"

1007

params = { pitch = 2.54, rows = 2, pins = 24 }

1008

aliases = ["2x24 2.54mm header", "2x24 header 2.54mm", "2x24 2.54", "2x24 pin header", "48 pin header 2.54", "48 pin header 2.54mm", "2.54mm 2x24"]

1009

standard = "Samtec TSW"

1010

1011

[[presets]]

1012

id = "2.54-2x25"

1013

title = "Pin header 2x25, 2.54 mm"

1014

params = { pitch = 2.54, rows = 2, pins = 25 }

1015

aliases = ["2x25 2.54mm header", "2x25 header 2.54mm", "2x25 2.54", "2x25 pin header", "50 pin header 2.54", "50 pin header 2.54mm", "2.54mm 2x25"]

1016

standard = "Samtec TSW"

1017

1018

[[presets]]

1019

id = "2.54-2x26"

1020

title = "Pin header 2x26, 2.54 mm"

1021

params = { pitch = 2.54, rows = 2, pins = 26 }

1022

aliases = ["2x26 2.54mm header", "2x26 header 2.54mm", "2x26 2.54", "2x26 pin header", "52 pin header 2.54", "52 pin header 2.54mm", "2.54mm 2x26"]

1023

standard = "Samtec TSW"

1024

1025

[[presets]]

1026

id = "2.54-2x27"

1027

title = "Pin header 2x27, 2.54 mm"

1028

params = { pitch = 2.54, rows = 2, pins = 27 }

1029

aliases = ["2x27 2.54mm header", "2x27 header 2.54mm", "2x27 2.54", "2x27 pin header", "54 pin header 2.54", "54 pin header 2.54mm", "2.54mm 2x27"]

1030

standard = "Samtec TSW"

1031

1032

[[presets]]

1033

id = "2.54-2x28"

1034

title = "Pin header 2x28, 2.54 mm"

1035

params = { pitch = 2.54, rows = 2, pins = 28 }

1036

aliases = ["2x28 2.54mm header", "2x28 header 2.54mm", "2x28 2.54", "2x28 pin header", "56 pin header 2.54", "56 pin header 2.54mm", "2.54mm 2x28"]

1037

standard = "Samtec TSW"

1038

1039

[[presets]]

1040

id = "2.54-2x29"

1041

title = "Pin header 2x29, 2.54 mm"

1042

params = { pitch = 2.54, rows = 2, pins = 29 }

1043

aliases = ["2x29 2.54mm header", "2x29 header 2.54mm", "2x29 2.54", "2x29 pin header", "58 pin header 2.54", "58 pin header 2.54mm", "2.54mm 2x29"]

1044

standard = "Samtec TSW"

1045

1046

[[presets]]

1047

id = "2.54-2x30"

1048

title = "Pin header 2x30, 2.54 mm"

1049

params = { pitch = 2.54, rows = 2, pins = 30 }

1050

aliases = ["2x30 2.54mm header", "2x30 header 2.54mm", "2x30 2.54", "2x30 pin header", "60 pin header 2.54", "60 pin header 2.54mm", "2.54mm 2x30"]

1051

standard = "Samtec TSW"

1052

1053

[[presets]]

1054

id = "2.54-2x31"

1055

title = "Pin header 2x31, 2.54 mm"

1056

params = { pitch = 2.54, rows = 2, pins = 31 }

1057

aliases = ["2x31 2.54mm header", "2x31 header 2.54mm", "2x31 2.54", "2x31 pin header", "62 pin header 2.54", "62 pin header 2.54mm", "2.54mm 2x31"]

1058

standard = "Samtec TSW"

1059

1060

[[presets]]

1061

id = "2.54-2x32"

1062

title = "Pin header 2x32, 2.54 mm"

1063

params = { pitch = 2.54, rows = 2, pins = 32 }

1064

aliases = ["2x32 2.54mm header", "2x32 header 2.54mm", "2x32 2.54", "2x32 pin header", "64 pin header 2.54", "64 pin header 2.54mm", "2.54mm 2x32"]

1065

standard = "Samtec TSW"

1066

1067

[[presets]]

1068

id = "2.54-2x33"

1069

title = "Pin header 2x33, 2.54 mm"

1070

params = { pitch = 2.54, rows = 2, pins = 33 }

1071

aliases = ["2x33 2.54mm header", "2x33 header 2.54mm", "2x33 2.54", "2x33 pin header", "66 pin header 2.54", "66 pin header 2.54mm", "2.54mm 2x33"]

1072

standard = "Samtec TSW"

1073

1074

[[presets]]

1075

id = "2.54-2x34"

1076

title = "Pin header 2x34, 2.54 mm"

1077

params = { pitch = 2.54, rows = 2, pins = 34 }

1078

aliases = ["2x34 2.54mm header", "2x34 header 2.54mm", "2x34 2.54", "2x34 pin header", "68 pin header 2.54", "68 pin header 2.54mm", "2.54mm 2x34"]

1079

standard = "Samtec TSW"

1080

1081

[[presets]]

1082

id = "2.54-2x35"

1083

title = "Pin header 2x35, 2.54 mm"

1084

params = { pitch = 2.54, rows = 2, pins = 35 }

1085

aliases = ["2x35 2.54mm header", "2x35 header 2.54mm", "2x35 2.54", "2x35 pin header", "70 pin header 2.54", "70 pin header 2.54mm", "2.54mm 2x35"]

1086

standard = "Samtec TSW"

1087

1088

[[presets]]

1089

id = "2.54-2x36"

1090

title = "Pin header 2x36, 2.54 mm"

1091

params = { pitch = 2.54, rows = 2, pins = 36 }

1092

aliases = ["2x36 2.54mm header", "2x36 header 2.54mm", "2x36 2.54", "2x36 pin header", "72 pin header 2.54", "72 pin header 2.54mm", "2.54mm 2x36"]

1093

standard = "Samtec TSW"

1094

1095

[[presets]]

1096

id = "2.54-2x37"

1097

title = "Pin header 2x37, 2.54 mm"

1098

params = { pitch = 2.54, rows = 2, pins = 37 }

1099

aliases = ["2x37 2.54mm header", "2x37 header 2.54mm", "2x37 2.54", "2x37 pin header", "74 pin header 2.54", "74 pin header 2.54mm", "2.54mm 2x37"]

1100

standard = "Samtec TSW"

1101

1102

[[presets]]

1103

id = "2.54-2x38"

1104

title = "Pin header 2x38, 2.54 mm"

1105

params = { pitch = 2.54, rows = 2, pins = 38 }

1106

aliases = ["2x38 2.54mm header", "2x38 header 2.54mm", "2x38 2.54", "2x38 pin header", "76 pin header 2.54", "76 pin header 2.54mm", "2.54mm 2x38"]

1107

standard = "Samtec TSW"

1108

1109

[[presets]]

1110

id = "2.54-2x39"

1111

title = "Pin header 2x39, 2.54 mm"

1112

params = { pitch = 2.54, rows = 2, pins = 39 }

1113

aliases = ["2x39 2.54mm header", "2x39 header 2.54mm", "2x39 2.54", "2x39 pin header", "78 pin header 2.54", "78 pin header 2.54mm", "2.54mm 2x39"]

1114

standard = "Samtec TSW"

1115

1116

[[presets]]

1117

id = "2.54-2x40"

1118

title = "Pin header 2x40, 2.54 mm"

1119

params = { pitch = 2.54, rows = 2, pins = 40 }

1120

aliases = ["2x40 2.54mm header", "2x40 header 2.54mm", "2x40 2.54", "2x40 pin header", "80 pin header 2.54", "80 pin header 2.54mm", "2.54mm 2x40"]

1121

standard = "Samtec TSW"

1122

1123

[[presets]]

1124

id = "2.00-1x01"

1125

title = "Pin header 1x01, 2.00 mm"

1126

params = { pitch = 2, rows = 1, pins = 1 }

1127

aliases = ["1x01 2.00mm header", "1x1 header 2.00mm", "1x1 2.00", "1x01 pin header", "1x1 pin header", "1 pin header 2.00", "1 pin header 2.00mm", "2.00mm 1x1"]

1128

standard = "Samtec TMM"

1129

1130

[[presets]]

1131

id = "2.00-1x02"

1132

title = "Pin header 1x02, 2.00 mm"

1133

params = { pitch = 2, rows = 1, pins = 2 }

1134

aliases = ["1x02 2.00mm header", "1x2 header 2.00mm", "1x2 2.00", "1x02 pin header", "1x2 pin header", "2 pin header 2.00", "2 pin header 2.00mm", "2.00mm 1x2"]

1135

standard = "Samtec TMM"

1136

1137

[[presets]]

1138

id = "2.00-1x03"

1139

title = "Pin header 1x03, 2.00 mm"

1140

params = { pitch = 2, rows = 1, pins = 3 }

1141

aliases = ["1x03 2.00mm header", "1x3 header 2.00mm", "1x3 2.00", "1x03 pin header", "1x3 pin header", "3 pin header 2.00", "3 pin header 2.00mm", "2.00mm 1x3"]

1142

standard = "Samtec TMM"

1143

1144

[[presets]]

1145

id = "2.00-1x04"

1146

title = "Pin header 1x04, 2.00 mm"

1147

params = { pitch = 2, rows = 1, pins = 4 }

1148

aliases = ["1x04 2.00mm header", "1x4 header 2.00mm", "1x4 2.00", "1x04 pin header", "1x4 pin header", "4 pin header 2.00", "4 pin header 2.00mm", "2.00mm 1x4"]

1149

standard = "Samtec TMM"

1150

1151

[[presets]]

1152

id = "2.00-1x05"

1153

title = "Pin header 1x05, 2.00 mm"

1154

params = { pitch = 2, rows = 1, pins = 5 }

1155

aliases = ["1x05 2.00mm header", "1x5 header 2.00mm", "1x5 2.00", "1x05 pin header", "1x5 pin header", "5 pin header 2.00", "5 pin header 2.00mm", "2.00mm 1x5"]

1156

standard = "Samtec TMM"

1157

1158

[[presets]]

1159

id = "2.00-1x06"

1160

title = "Pin header 1x06, 2.00 mm"

1161

params = { pitch = 2, rows = 1, pins = 6 }

1162

aliases = ["1x06 2.00mm header", "1x6 header 2.00mm", "1x6 2.00", "1x06 pin header", "1x6 pin header", "6 pin header 2.00", "6 pin header 2.00mm", "2.00mm 1x6"]

1163

standard = "Samtec TMM"

1164

1165

[[presets]]

1166

id = "2.00-1x07"

1167

title = "Pin header 1x07, 2.00 mm"

1168

params = { pitch = 2, rows = 1, pins = 7 }

1169

aliases = ["1x07 2.00mm header", "1x7 header 2.00mm", "1x7 2.00", "1x07 pin header", "1x7 pin header", "7 pin header 2.00", "7 pin header 2.00mm", "2.00mm 1x7"]

1170

standard = "Samtec TMM"

1171

1172

[[presets]]

1173

id = "2.00-1x08"

1174

title = "Pin header 1x08, 2.00 mm"

1175

params = { pitch = 2, rows = 1, pins = 8 }

1176

aliases = ["1x08 2.00mm header", "1x8 header 2.00mm", "1x8 2.00", "1x08 pin header", "1x8 pin header", "8 pin header 2.00", "8 pin header 2.00mm", "2.00mm 1x8"]

1177

standard = "Samtec TMM"

1178

1179

[[presets]]

1180

id = "2.00-1x09"

1181

title = "Pin header 1x09, 2.00 mm"

1182

params = { pitch = 2, rows = 1, pins = 9 }

1183

aliases = ["1x09 2.00mm header", "1x9 header 2.00mm", "1x9 2.00", "1x09 pin header", "1x9 pin header", "9 pin header 2.00", "9 pin header 2.00mm", "2.00mm 1x9"]

1184

standard = "Samtec TMM"

1185

1186

[[presets]]

1187

id = "2.00-1x10"

1188

title = "Pin header 1x10, 2.00 mm"

1189

params = { pitch = 2, rows = 1, pins = 10 }

1190

aliases = ["1x10 2.00mm header", "1x10 header 2.00mm", "1x10 2.00", "1x10 pin header", "10 pin header 2.00", "10 pin header 2.00mm", "2.00mm 1x10"]

1191

standard = "Samtec TMM"

1192

1193

[[presets]]

1194

id = "2.00-1x11"

1195

title = "Pin header 1x11, 2.00 mm"

1196

params = { pitch = 2, rows = 1, pins = 11 }

1197

aliases = ["1x11 2.00mm header", "1x11 header 2.00mm", "1x11 2.00", "1x11 pin header", "11 pin header 2.00", "11 pin header 2.00mm", "2.00mm 1x11"]

1198

standard = "Samtec TMM"

1199

1200

[[presets]]

1201

id = "2.00-1x12"

1202

title = "Pin header 1x12, 2.00 mm"

1203

params = { pitch = 2, rows = 1, pins = 12 }

1204

aliases = ["1x12 2.00mm header", "1x12 header 2.00mm", "1x12 2.00", "1x12 pin header", "12 pin header 2.00", "12 pin header 2.00mm", "2.00mm 1x12"]

1205

standard = "Samtec TMM"

1206

1207

[[presets]]

1208

id = "2.00-1x13"

1209

title = "Pin header 1x13, 2.00 mm"

1210

params = { pitch = 2, rows = 1, pins = 13 }

1211

aliases = ["1x13 2.00mm header", "1x13 header 2.00mm", "1x13 2.00", "1x13 pin header", "13 pin header 2.00", "13 pin header 2.00mm", "2.00mm 1x13"]

1212

standard = "Samtec TMM"

1213

1214

[[presets]]

1215

id = "2.00-1x14"

1216

title = "Pin header 1x14, 2.00 mm"

1217

params = { pitch = 2, rows = 1, pins = 14 }

1218

aliases = ["1x14 2.00mm header", "1x14 header 2.00mm", "1x14 2.00", "1x14 pin header", "14 pin header 2.00", "14 pin header 2.00mm", "2.00mm 1x14"]

1219

standard = "Samtec TMM"

1220

1221

[[presets]]

1222

id = "2.00-1x15"

1223

title = "Pin header 1x15, 2.00 mm"

1224

params = { pitch = 2, rows = 1, pins = 15 }

1225

aliases = ["1x15 2.00mm header", "1x15 header 2.00mm", "1x15 2.00", "1x15 pin header", "15 pin header 2.00", "15 pin header 2.00mm", "2.00mm 1x15"]

1226

standard = "Samtec TMM"

1227

1228

[[presets]]

1229

id = "2.00-1x16"

1230

title = "Pin header 1x16, 2.00 mm"

1231

params = { pitch = 2, rows = 1, pins = 16 }

1232

aliases = ["1x16 2.00mm header", "1x16 header 2.00mm", "1x16 2.00", "1x16 pin header", "16 pin header 2.00", "16 pin header 2.00mm", "2.00mm 1x16"]

1233

standard = "Samtec TMM"

1234

1235

[[presets]]

1236

id = "2.00-1x17"

1237

title = "Pin header 1x17, 2.00 mm"

1238

params = { pitch = 2, rows = 1, pins = 17 }

1239

aliases = ["1x17 2.00mm header", "1x17 header 2.00mm", "1x17 2.00", "1x17 pin header", "17 pin header 2.00", "17 pin header 2.00mm", "2.00mm 1x17"]

1240

standard = "Samtec TMM"

1241

1242

[[presets]]

1243

id = "2.00-1x18"

1244

title = "Pin header 1x18, 2.00 mm"

1245

params = { pitch = 2, rows = 1, pins = 18 }

1246

aliases = ["1x18 2.00mm header", "1x18 header 2.00mm", "1x18 2.00", "1x18 pin header", "18 pin header 2.00", "18 pin header 2.00mm", "2.00mm 1x18"]

1247

standard = "Samtec TMM"

1248

1249

[[presets]]

1250

id = "2.00-1x19"

1251

title = "Pin header 1x19, 2.00 mm"

1252

params = { pitch = 2, rows = 1, pins = 19 }

1253

aliases = ["1x19 2.00mm header", "1x19 header 2.00mm", "1x19 2.00", "1x19 pin header", "19 pin header 2.00", "19 pin header 2.00mm", "2.00mm 1x19"]

1254

standard = "Samtec TMM"

1255

1256

[[presets]]

1257

id = "2.00-1x20"

1258

title = "Pin header 1x20, 2.00 mm"

1259

params = { pitch = 2, rows = 1, pins = 20 }

1260

aliases = ["1x20 2.00mm header", "1x20 header 2.00mm", "1x20 2.00", "1x20 pin header", "20 pin header 2.00", "20 pin header 2.00mm", "2.00mm 1x20"]

1261

standard = "Samtec TMM"

1262

1263

[[presets]]

1264

id = "2.00-1x21"

1265

title = "Pin header 1x21, 2.00 mm"

1266

params = { pitch = 2, rows = 1, pins = 21 }

1267

aliases = ["1x21 2.00mm header", "1x21 header 2.00mm", "1x21 2.00", "1x21 pin header", "21 pin header 2.00", "21 pin header 2.00mm", "2.00mm 1x21"]

1268

standard = "Samtec TMM"

1269

1270

[[presets]]

1271

id = "2.00-1x22"

1272

title = "Pin header 1x22, 2.00 mm"

1273

params = { pitch = 2, rows = 1, pins = 22 }

1274

aliases = ["1x22 2.00mm header", "1x22 header 2.00mm", "1x22 2.00", "1x22 pin header", "22 pin header 2.00", "22 pin header 2.00mm", "2.00mm 1x22"]

1275

standard = "Samtec TMM"

1276

1277

[[presets]]

1278

id = "2.00-1x23"

1279

title = "Pin header 1x23, 2.00 mm"

1280

params = { pitch = 2, rows = 1, pins = 23 }

1281

aliases = ["1x23 2.00mm header", "1x23 header 2.00mm", "1x23 2.00", "1x23 pin header", "23 pin header 2.00", "23 pin header 2.00mm", "2.00mm 1x23"]

1282

standard = "Samtec TMM"

1283

1284

[[presets]]

1285

id = "2.00-1x24"

1286

title = "Pin header 1x24, 2.00 mm"

1287

params = { pitch = 2, rows = 1, pins = 24 }

1288

aliases = ["1x24 2.00mm header", "1x24 header 2.00mm", "1x24 2.00", "1x24 pin header", "24 pin header 2.00", "24 pin header 2.00mm", "2.00mm 1x24"]

1289

standard = "Samtec TMM"

1290

1291

[[presets]]

1292

id = "2.00-1x25"

1293

title = "Pin header 1x25, 2.00 mm"

1294

params = { pitch = 2, rows = 1, pins = 25 }

1295

aliases = ["1x25 2.00mm header", "1x25 header 2.00mm", "1x25 2.00", "1x25 pin header", "25 pin header 2.00", "25 pin header 2.00mm", "2.00mm 1x25"]

1296

standard = "Samtec TMM"

1297

1298

[[presets]]

1299

id = "2.00-1x26"

1300

title = "Pin header 1x26, 2.00 mm"

1301

params = { pitch = 2, rows = 1, pins = 26 }

1302

aliases = ["1x26 2.00mm header", "1x26 header 2.00mm", "1x26 2.00", "1x26 pin header", "26 pin header 2.00", "26 pin header 2.00mm", "2.00mm 1x26"]

1303

standard = "Samtec TMM"

1304

1305

[[presets]]

1306

id = "2.00-1x27"

1307

title = "Pin header 1x27, 2.00 mm"

1308

params = { pitch = 2, rows = 1, pins = 27 }

1309

aliases = ["1x27 2.00mm header", "1x27 header 2.00mm", "1x27 2.00", "1x27 pin header", "27 pin header 2.00", "27 pin header 2.00mm", "2.00mm 1x27"]

1310

standard = "Samtec TMM"

1311

1312

[[presets]]

1313

id = "2.00-1x28"

1314

title = "Pin header 1x28, 2.00 mm"

1315

params = { pitch = 2, rows = 1, pins = 28 }

1316

aliases = ["1x28 2.00mm header", "1x28 header 2.00mm", "1x28 2.00", "1x28 pin header", "28 pin header 2.00", "28 pin header 2.00mm", "2.00mm 1x28"]

1317

standard = "Samtec TMM"

1318

1319

[[presets]]

1320

id = "2.00-1x29"

1321

title = "Pin header 1x29, 2.00 mm"

1322

params = { pitch = 2, rows = 1, pins = 29 }

1323

aliases = ["1x29 2.00mm header", "1x29 header 2.00mm", "1x29 2.00", "1x29 pin header", "29 pin header 2.00", "29 pin header 2.00mm", "2.00mm 1x29"]

1324

standard = "Samtec TMM"

1325

1326

[[presets]]

1327

id = "2.00-1x30"

1328

title = "Pin header 1x30, 2.00 mm"

1329

params = { pitch = 2, rows = 1, pins = 30 }

1330

aliases = ["1x30 2.00mm header", "1x30 header 2.00mm", "1x30 2.00", "1x30 pin header", "30 pin header 2.00", "30 pin header 2.00mm", "2.00mm 1x30"]

1331

standard = "Samtec TMM"

1332

1333

[[presets]]

1334

id = "2.00-1x31"

1335

title = "Pin header 1x31, 2.00 mm"

1336

params = { pitch = 2, rows = 1, pins = 31 }

1337

aliases = ["1x31 2.00mm header", "1x31 header 2.00mm", "1x31 2.00", "1x31 pin header", "31 pin header 2.00", "31 pin header 2.00mm", "2.00mm 1x31"]

1338

standard = "Samtec TMM"

1339

1340

[[presets]]

1341

id = "2.00-1x32"

1342

title = "Pin header 1x32, 2.00 mm"

1343

params = { pitch = 2, rows = 1, pins = 32 }

1344

aliases = ["1x32 2.00mm header", "1x32 header 2.00mm", "1x32 2.00", "1x32 pin header", "32 pin header 2.00", "32 pin header 2.00mm", "2.00mm 1x32"]

1345

standard = "Samtec TMM"

1346

1347

[[presets]]

1348

id = "2.00-1x33"

1349

title = "Pin header 1x33, 2.00 mm"

1350

params = { pitch = 2, rows = 1, pins = 33 }

1351

aliases = ["1x33 2.00mm header", "1x33 header 2.00mm", "1x33 2.00", "1x33 pin header", "33 pin header 2.00", "33 pin header 2.00mm", "2.00mm 1x33"]

1352

standard = "Samtec TMM"

1353

1354

[[presets]]

1355

id = "2.00-1x34"

1356

title = "Pin header 1x34, 2.00 mm"

1357

params = { pitch = 2, rows = 1, pins = 34 }

1358

aliases = ["1x34 2.00mm header", "1x34 header 2.00mm", "1x34 2.00", "1x34 pin header", "34 pin header 2.00", "34 pin header 2.00mm", "2.00mm 1x34"]

1359

standard = "Samtec TMM"

1360

1361

[[presets]]

1362

id = "2.00-1x35"

1363

title = "Pin header 1x35, 2.00 mm"

1364

params = { pitch = 2, rows = 1, pins = 35 }

1365

aliases = ["1x35 2.00mm header", "1x35 header 2.00mm", "1x35 2.00", "1x35 pin header", "35 pin header 2.00", "35 pin header 2.00mm", "2.00mm 1x35"]

1366

standard = "Samtec TMM"

1367

1368

[[presets]]

1369

id = "2.00-1x36"

1370

title = "Pin header 1x36, 2.00 mm"

1371

params = { pitch = 2, rows = 1, pins = 36 }

1372

aliases = ["1x36 2.00mm header", "1x36 header 2.00mm", "1x36 2.00", "1x36 pin header", "36 pin header 2.00", "36 pin header 2.00mm", "2.00mm 1x36"]

1373

standard = "Samtec TMM"

1374

1375

[[presets]]

1376

id = "2.00-1x37"

1377

title = "Pin header 1x37, 2.00 mm"

1378

params = { pitch = 2, rows = 1, pins = 37 }

1379

aliases = ["1x37 2.00mm header", "1x37 header 2.00mm", "1x37 2.00", "1x37 pin header", "37 pin header 2.00", "37 pin header 2.00mm", "2.00mm 1x37"]

1380

standard = "Samtec TMM"

1381

1382

[[presets]]

1383

id = "2.00-1x38"

1384

title = "Pin header 1x38, 2.00 mm"

1385

params = { pitch = 2, rows = 1, pins = 38 }

1386

aliases = ["1x38 2.00mm header", "1x38 header 2.00mm", "1x38 2.00", "1x38 pin header", "38 pin header 2.00", "38 pin header 2.00mm", "2.00mm 1x38"]

1387

standard = "Samtec TMM"

1388

1389

[[presets]]

1390

id = "2.00-1x39"

1391

title = "Pin header 1x39, 2.00 mm"

1392

params = { pitch = 2, rows = 1, pins = 39 }

1393

aliases = ["1x39 2.00mm header", "1x39 header 2.00mm", "1x39 2.00", "1x39 pin header", "39 pin header 2.00", "39 pin header 2.00mm", "2.00mm 1x39"]

1394

standard = "Samtec TMM"

1395

1396

[[presets]]

1397

id = "2.00-1x40"

1398

title = "Pin header 1x40, 2.00 mm"

1399

params = { pitch = 2, rows = 1, pins = 40 }

1400

aliases = ["1x40 2.00mm header", "1x40 header 2.00mm", "1x40 2.00", "1x40 pin header", "40 pin header 2.00", "40 pin header 2.00mm", "2.00mm 1x40"]

1401

standard = "Samtec TMM"

1402

1403

[[presets]]

1404

id = "2.00-2x01"

1405

title = "Pin header 2x01, 2.00 mm"

1406

params = { pitch = 2, rows = 2, pins = 1 }

1407

aliases = ["2x01 2.00mm header", "2x1 header 2.00mm", "2x1 2.00", "2x01 pin header", "2x1 pin header", "2 pin header 2.00", "2 pin header 2.00mm", "2.00mm 2x1"]

1408

standard = "Samtec TMM"

1409

1410

[[presets]]

1411

id = "2.00-2x02"

1412

title = "Pin header 2x02, 2.00 mm"

1413

params = { pitch = 2, rows = 2, pins = 2 }

1414

aliases = ["2x02 2.00mm header", "2x2 header 2.00mm", "2x2 2.00", "2x02 pin header", "2x2 pin header", "4 pin header 2.00", "4 pin header 2.00mm", "2.00mm 2x2"]

1415

standard = "Samtec TMM"

1416

1417

[[presets]]

1418

id = "2.00-2x03"

1419

title = "Pin header 2x03, 2.00 mm"

1420

params = { pitch = 2, rows = 2, pins = 3 }

1421

aliases = ["2x03 2.00mm header", "2x3 header 2.00mm", "2x3 2.00", "2x03 pin header", "2x3 pin header", "6 pin header 2.00", "6 pin header 2.00mm", "2.00mm 2x3"]

1422

standard = "Samtec TMM"

1423

1424

[[presets]]

1425

id = "2.00-2x04"

1426

title = "Pin header 2x04, 2.00 mm"

1427

params = { pitch = 2, rows = 2, pins = 4 }

1428

aliases = ["2x04 2.00mm header", "2x4 header 2.00mm", "2x4 2.00", "2x04 pin header", "2x4 pin header", "8 pin header 2.00", "8 pin header 2.00mm", "2.00mm 2x4"]

1429

standard = "Samtec TMM"

1430

1431

[[presets]]

1432

id = "2.00-2x05"

1433

title = "Pin header 2x05, 2.00 mm"

1434

params = { pitch = 2, rows = 2, pins = 5 }

1435

aliases = ["2x05 2.00mm header", "2x5 header 2.00mm", "2x5 2.00", "2x05 pin header", "2x5 pin header", "10 pin header 2.00", "10 pin header 2.00mm", "2.00mm 2x5"]

1436

standard = "Samtec TMM"

1437

1438

[[presets]]

1439

id = "2.00-2x06"

1440

title = "Pin header 2x06, 2.00 mm"

1441

params = { pitch = 2, rows = 2, pins = 6 }

1442

aliases = ["2x06 2.00mm header", "2x6 header 2.00mm", "2x6 2.00", "2x06 pin header", "2x6 pin header", "12 pin header 2.00", "12 pin header 2.00mm", "2.00mm 2x6"]

1443

standard = "Samtec TMM"

1444

1445

[[presets]]

1446

id = "2.00-2x07"

1447

title = "Pin header 2x07, 2.00 mm"

1448

params = { pitch = 2, rows = 2, pins = 7 }

1449

aliases = ["2x07 2.00mm header", "2x7 header 2.00mm", "2x7 2.00", "2x07 pin header", "2x7 pin header", "14 pin header 2.00", "14 pin header 2.00mm", "2.00mm 2x7"]

1450

standard = "Samtec TMM"

1451

1452

[[presets]]

1453

id = "2.00-2x08"

1454

title = "Pin header 2x08, 2.00 mm"

1455

params = { pitch = 2, rows = 2, pins = 8 }

1456

aliases = ["2x08 2.00mm header", "2x8 header 2.00mm", "2x8 2.00", "2x08 pin header", "2x8 pin header", "16 pin header 2.00", "16 pin header 2.00mm", "2.00mm 2x8"]

1457

standard = "Samtec TMM"

1458

1459

[[presets]]

1460

id = "2.00-2x09"

1461

title = "Pin header 2x09, 2.00 mm"

1462

params = { pitch = 2, rows = 2, pins = 9 }

1463

aliases = ["2x09 2.00mm header", "2x9 header 2.00mm", "2x9 2.00", "2x09 pin header", "2x9 pin header", "18 pin header 2.00", "18 pin header 2.00mm", "2.00mm 2x9"]

1464

standard = "Samtec TMM"

1465

1466

[[presets]]

1467

id = "2.00-2x10"

1468

title = "Pin header 2x10, 2.00 mm"

1469

params = { pitch = 2, rows = 2, pins = 10 }

1470

aliases = ["2x10 2.00mm header", "2x10 header 2.00mm", "2x10 2.00", "2x10 pin header", "20 pin header 2.00", "20 pin header 2.00mm", "2.00mm 2x10"]

1471

standard = "Samtec TMM"

1472

1473

[[presets]]

1474

id = "2.00-2x11"

1475

title = "Pin header 2x11, 2.00 mm"

1476

params = { pitch = 2, rows = 2, pins = 11 }

1477

aliases = ["2x11 2.00mm header", "2x11 header 2.00mm", "2x11 2.00", "2x11 pin header", "22 pin header 2.00", "22 pin header 2.00mm", "2.00mm 2x11"]

1478

standard = "Samtec TMM"

1479

1480

[[presets]]

1481

id = "2.00-2x12"

1482

title = "Pin header 2x12, 2.00 mm"

1483

params = { pitch = 2, rows = 2, pins = 12 }

1484

aliases = ["2x12 2.00mm header", "2x12 header 2.00mm", "2x12 2.00", "2x12 pin header", "24 pin header 2.00", "24 pin header 2.00mm", "2.00mm 2x12"]

1485

standard = "Samtec TMM"

1486

1487

[[presets]]

1488

id = "2.00-2x13"

1489

title = "Pin header 2x13, 2.00 mm"

1490

params = { pitch = 2, rows = 2, pins = 13 }

1491

aliases = ["2x13 2.00mm header", "2x13 header 2.00mm", "2x13 2.00", "2x13 pin header", "26 pin header 2.00", "26 pin header 2.00mm", "2.00mm 2x13"]

1492

standard = "Samtec TMM"

1493

1494

[[presets]]

1495

id = "2.00-2x14"

1496

title = "Pin header 2x14, 2.00 mm"

1497

params = { pitch = 2, rows = 2, pins = 14 }

1498

aliases = ["2x14 2.00mm header", "2x14 header 2.00mm", "2x14 2.00", "2x14 pin header", "28 pin header 2.00", "28 pin header 2.00mm", "2.00mm 2x14"]

1499

standard = "Samtec TMM"

1500

1501

[[presets]]

1502

id = "2.00-2x15"

1503

title = "Pin header 2x15, 2.00 mm"

1504

params = { pitch = 2, rows = 2, pins = 15 }

1505

aliases = ["2x15 2.00mm header", "2x15 header 2.00mm", "2x15 2.00", "2x15 pin header", "30 pin header 2.00", "30 pin header 2.00mm", "2.00mm 2x15"]

1506

standard = "Samtec TMM"

1507

1508

[[presets]]

1509

id = "2.00-2x16"

1510

title = "Pin header 2x16, 2.00 mm"

1511

params = { pitch = 2, rows = 2, pins = 16 }

1512

aliases = ["2x16 2.00mm header", "2x16 header 2.00mm", "2x16 2.00", "2x16 pin header", "32 pin header 2.00", "32 pin header 2.00mm", "2.00mm 2x16"]

1513

standard = "Samtec TMM"

1514

1515

[[presets]]

1516

id = "2.00-2x17"

1517

title = "Pin header 2x17, 2.00 mm"

1518

params = { pitch = 2, rows = 2, pins = 17 }

1519

aliases = ["2x17 2.00mm header", "2x17 header 2.00mm", "2x17 2.00", "2x17 pin header", "34 pin header 2.00", "34 pin header 2.00mm", "2.00mm 2x17"]

1520

standard = "Samtec TMM"

1521

1522

[[presets]]

1523

id = "2.00-2x18"

1524

title = "Pin header 2x18, 2.00 mm"

1525

params = { pitch = 2, rows = 2, pins = 18 }

1526

aliases = ["2x18 2.00mm header", "2x18 header 2.00mm", "2x18 2.00", "2x18 pin header", "36 pin header 2.00", "36 pin header 2.00mm", "2.00mm 2x18"]

1527

standard = "Samtec TMM"

1528

1529

[[presets]]

1530

id = "2.00-2x19"

1531

title = "Pin header 2x19, 2.00 mm"

1532

params = { pitch = 2, rows = 2, pins = 19 }

1533

aliases = ["2x19 2.00mm header", "2x19 header 2.00mm", "2x19 2.00", "2x19 pin header", "38 pin header 2.00", "38 pin header 2.00mm", "2.00mm 2x19"]

1534

standard = "Samtec TMM"

1535

1536

[[presets]]

1537

id = "2.00-2x20"

1538

title = "Pin header 2x20, 2.00 mm"

1539

params = { pitch = 2, rows = 2, pins = 20 }

1540

aliases = ["2x20 2.00mm header", "2x20 header 2.00mm", "2x20 2.00", "2x20 pin header", "40 pin header 2.00", "40 pin header 2.00mm", "2.00mm 2x20"]

1541

standard = "Samtec TMM"

1542

1543

[[presets]]

1544

id = "2.00-2x21"

1545

title = "Pin header 2x21, 2.00 mm"

1546

params = { pitch = 2, rows = 2, pins = 21 }

1547

aliases = ["2x21 2.00mm header", "2x21 header 2.00mm", "2x21 2.00", "2x21 pin header", "42 pin header 2.00", "42 pin header 2.00mm", "2.00mm 2x21"]

1548

standard = "Samtec TMM"

1549

1550

[[presets]]

1551

id = "2.00-2x22"

1552

title = "Pin header 2x22, 2.00 mm"

1553

params = { pitch = 2, rows = 2, pins = 22 }

1554

aliases = ["2x22 2.00mm header", "2x22 header 2.00mm", "2x22 2.00", "2x22 pin header", "44 pin header 2.00", "44 pin header 2.00mm", "2.00mm 2x22"]

1555

standard = "Samtec TMM"

1556

1557

[[presets]]

1558

id = "2.00-2x23"

1559

title = "Pin header 2x23, 2.00 mm"

1560

params = { pitch = 2, rows = 2, pins = 23 }

1561

aliases = ["2x23 2.00mm header", "2x23 header 2.00mm", "2x23 2.00", "2x23 pin header", "46 pin header 2.00", "46 pin header 2.00mm", "2.00mm 2x23"]

1562

standard = "Samtec TMM"

1563

1564

[[presets]]

1565

id = "2.00-2x24"

1566

title = "Pin header 2x24, 2.00 mm"

1567

params = { pitch = 2, rows = 2, pins = 24 }

1568

aliases = ["2x24 2.00mm header", "2x24 header 2.00mm", "2x24 2.00", "2x24 pin header", "48 pin header 2.00", "48 pin header 2.00mm", "2.00mm 2x24"]

1569

standard = "Samtec TMM"

1570

1571

[[presets]]

1572

id = "2.00-2x25"

1573

title = "Pin header 2x25, 2.00 mm"

1574

params = { pitch = 2, rows = 2, pins = 25 }

1575

aliases = ["2x25 2.00mm header", "2x25 header 2.00mm", "2x25 2.00", "2x25 pin header", "50 pin header 2.00", "50 pin header 2.00mm", "2.00mm 2x25"]

1576

standard = "Samtec TMM"

1577

1578

[[presets]]

1579

id = "2.00-2x26"

1580

title = "Pin header 2x26, 2.00 mm"

1581

params = { pitch = 2, rows = 2, pins = 26 }

1582

aliases = ["2x26 2.00mm header", "2x26 header 2.00mm", "2x26 2.00", "2x26 pin header", "52 pin header 2.00", "52 pin header 2.00mm", "2.00mm 2x26"]

1583

standard = "Samtec TMM"

1584

1585

[[presets]]

1586

id = "2.00-2x27"

1587

title = "Pin header 2x27, 2.00 mm"

1588

params = { pitch = 2, rows = 2, pins = 27 }

1589

aliases = ["2x27 2.00mm header", "2x27 header 2.00mm", "2x27 2.00", "2x27 pin header", "54 pin header 2.00", "54 pin header 2.00mm", "2.00mm 2x27"]

1590

standard = "Samtec TMM"

1591

1592

[[presets]]

1593

id = "2.00-2x28"

1594

title = "Pin header 2x28, 2.00 mm"

1595

params = { pitch = 2, rows = 2, pins = 28 }

1596

aliases = ["2x28 2.00mm header", "2x28 header 2.00mm", "2x28 2.00", "2x28 pin header", "56 pin header 2.00", "56 pin header 2.00mm", "2.00mm 2x28"]

1597

standard = "Samtec TMM"

1598

1599

[[presets]]

1600

id = "2.00-2x29"

1601

title = "Pin header 2x29, 2.00 mm"

1602

params = { pitch = 2, rows = 2, pins = 29 }

1603

aliases = ["2x29 2.00mm header", "2x29 header 2.00mm", "2x29 2.00", "2x29 pin header", "58 pin header 2.00", "58 pin header 2.00mm", "2.00mm 2x29"]

1604

standard = "Samtec TMM"

1605

1606

[[presets]]

1607

id = "2.00-2x30"

1608

title = "Pin header 2x30, 2.00 mm"

1609

params = { pitch = 2, rows = 2, pins = 30 }

1610

aliases = ["2x30 2.00mm header", "2x30 header 2.00mm", "2x30 2.00", "2x30 pin header", "60 pin header 2.00", "60 pin header 2.00mm", "2.00mm 2x30"]

1611

standard = "Samtec TMM"

1612

1613

[[presets]]

1614

id = "2.00-2x31"

1615

title = "Pin header 2x31, 2.00 mm"

1616

params = { pitch = 2, rows = 2, pins = 31 }

1617

aliases = ["2x31 2.00mm header", "2x31 header 2.00mm", "2x31 2.00", "2x31 pin header", "62 pin header 2.00", "62 pin header 2.00mm", "2.00mm 2x31"]

1618

standard = "Samtec TMM"

1619

1620

[[presets]]

1621

id = "2.00-2x32"

1622

title = "Pin header 2x32, 2.00 mm"

1623

params = { pitch = 2, rows = 2, pins = 32 }

1624

aliases = ["2x32 2.00mm header", "2x32 header 2.00mm", "2x32 2.00", "2x32 pin header", "64 pin header 2.00", "64 pin header 2.00mm", "2.00mm 2x32"]

1625

standard = "Samtec TMM"

1626

1627

[[presets]]

1628

id = "2.00-2x33"

1629

title = "Pin header 2x33, 2.00 mm"

1630

params = { pitch = 2, rows = 2, pins = 33 }

1631

aliases = ["2x33 2.00mm header", "2x33 header 2.00mm", "2x33 2.00", "2x33 pin header", "66 pin header 2.00", "66 pin header 2.00mm", "2.00mm 2x33"]

1632

standard = "Samtec TMM"

1633

1634

[[presets]]

1635

id = "2.00-2x34"

1636

title = "Pin header 2x34, 2.00 mm"

1637

params = { pitch = 2, rows = 2, pins = 34 }

1638

aliases = ["2x34 2.00mm header", "2x34 header 2.00mm", "2x34 2.00", "2x34 pin header", "68 pin header 2.00", "68 pin header 2.00mm", "2.00mm 2x34"]

1639

standard = "Samtec TMM"

1640

1641

[[presets]]

1642

id = "2.00-2x35"

1643

title = "Pin header 2x35, 2.00 mm"

1644

params = { pitch = 2, rows = 2, pins = 35 }

1645

aliases = ["2x35 2.00mm header", "2x35 header 2.00mm", "2x35 2.00", "2x35 pin header", "70 pin header 2.00", "70 pin header 2.00mm", "2.00mm 2x35"]

1646

standard = "Samtec TMM"

1647

1648

[[presets]]

1649

id = "2.00-2x36"

1650

title = "Pin header 2x36, 2.00 mm"

1651

params = { pitch = 2, rows = 2, pins = 36 }

1652

aliases = ["2x36 2.00mm header", "2x36 header 2.00mm", "2x36 2.00", "2x36 pin header", "72 pin header 2.00", "72 pin header 2.00mm", "2.00mm 2x36"]

1653

standard = "Samtec TMM"

1654

1655

[[presets]]

1656

id = "2.00-2x37"

1657

title = "Pin header 2x37, 2.00 mm"

1658

params = { pitch = 2, rows = 2, pins = 37 }

1659

aliases = ["2x37 2.00mm header", "2x37 header 2.00mm", "2x37 2.00", "2x37 pin header", "74 pin header 2.00", "74 pin header 2.00mm", "2.00mm 2x37"]

1660

standard = "Samtec TMM"

1661

1662

[[presets]]

1663

id = "2.00-2x38"

1664

title = "Pin header 2x38, 2.00 mm"

1665

params = { pitch = 2, rows = 2, pins = 38 }

1666

aliases = ["2x38 2.00mm header", "2x38 header 2.00mm", "2x38 2.00", "2x38 pin header", "76 pin header 2.00", "76 pin header 2.00mm", "2.00mm 2x38"]

1667

standard = "Samtec TMM"

1668

1669

[[presets]]

1670

id = "2.00-2x39"

1671

title = "Pin header 2x39, 2.00 mm"

1672

params = { pitch = 2, rows = 2, pins = 39 }

1673

aliases = ["2x39 2.00mm header", "2x39 header 2.00mm", "2x39 2.00", "2x39 pin header", "78 pin header 2.00", "78 pin header 2.00mm", "2.00mm 2x39"]

1674

standard = "Samtec TMM"

1675

1676

[[presets]]

1677

id = "2.00-2x40"

1678

title = "Pin header 2x40, 2.00 mm"

1679

params = { pitch = 2, rows = 2, pins = 40 }

1680

aliases = ["2x40 2.00mm header", "2x40 header 2.00mm", "2x40 2.00", "2x40 pin header", "80 pin header 2.00", "80 pin header 2.00mm", "2.00mm 2x40"]

1681

standard = "Samtec TMM"

1682

1683

[[presets]]

1684

id = "2.54-1x08-simple"

1685

title = "Pin header 1x08, 2.54 mm, simple"

1686

params = { pitch = 2.54, rows = 1, pins = 8, detail = "simple" }

1687

aliases = ["1x08 2.54mm simple"]

1688

standard = "Samtec TSW"

1689

# Presets of this part (factory/PRESETS.md). Written by factory/gen.py.

[[presets]]
id = "2.54-1x01-RA"
title = "Pin header 1x01, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 1, pins = 1, style = "right-angle" }
aliases = ["1x01 right angle header", "1x1 right angle header", "1x1 right angle 2.54", "1x01 2.54mm right angle", "1 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x02-RA"
title = "Pin header 1x02, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 1, pins = 2, style = "right-angle" }
aliases = ["1x02 right angle header", "1x2 right angle header", "1x2 right angle 2.54", "1x02 2.54mm right angle", "2 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x03-RA"
title = "Pin header 1x03, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 1, pins = 3, style = "right-angle" }
aliases = ["1x03 right angle header", "1x3 right angle header", "1x3 right angle 2.54", "1x03 2.54mm right angle", "3 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x04-RA"
title = "Pin header 1x04, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 1, pins = 4, style = "right-angle" }
aliases = ["1x04 right angle header", "1x4 right angle header", "1x4 right angle 2.54", "1x04 2.54mm right angle", "4 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x05-RA"
title = "Pin header 1x05, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 1, pins = 5, style = "right-angle" }
aliases = ["1x05 right angle header", "1x5 right angle header", "1x5 right angle 2.54", "1x05 2.54mm right angle", "5 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x06-RA"
title = "Pin header 1x06, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 1, pins = 6, style = "right-angle" }
aliases = ["1x06 right angle header", "1x6 right angle header", "1x6 right angle 2.54", "1x06 2.54mm right angle", "6 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x07-RA"
title = "Pin header 1x07, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 1, pins = 7, style = "right-angle" }
aliases = ["1x07 right angle header", "1x7 right angle header", "1x7 right angle 2.54", "1x07 2.54mm right angle", "7 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x08-RA"
title = "Pin header 1x08, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 1, pins = 8, style = "right-angle" }
aliases = ["1x08 right angle header", "1x8 right angle header", "1x8 right angle 2.54", "1x08 2.54mm right angle", "8 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x09-RA"
title = "Pin header 1x09, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 1, pins = 9, style = "right-angle" }
aliases = ["1x09 right angle header", "1x9 right angle header", "1x9 right angle 2.54", "1x09 2.54mm right angle", "9 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x10-RA"
title = "Pin header 1x10, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 1, pins = 10, style = "right-angle" }
aliases = ["1x10 right angle header", "1x10 right angle 2.54", "1x10 2.54mm right angle", "10 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x11-RA"
title = "Pin header 1x11, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 1, pins = 11, style = "right-angle" }
aliases = ["1x11 right angle header", "1x11 right angle 2.54", "1x11 2.54mm right angle", "11 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x12-RA"
title = "Pin header 1x12, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 1, pins = 12, style = "right-angle" }
aliases = ["1x12 right angle header", "1x12 right angle 2.54", "1x12 2.54mm right angle", "12 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x13-RA"
title = "Pin header 1x13, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 1, pins = 13, style = "right-angle" }
aliases = ["1x13 right angle header", "1x13 right angle 2.54", "1x13 2.54mm right angle", "13 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x14-RA"
title = "Pin header 1x14, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 1, pins = 14, style = "right-angle" }
aliases = ["1x14 right angle header", "1x14 right angle 2.54", "1x14 2.54mm right angle", "14 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x15-RA"
title = "Pin header 1x15, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 1, pins = 15, style = "right-angle" }
aliases = ["1x15 right angle header", "1x15 right angle 2.54", "1x15 2.54mm right angle", "15 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x16-RA"
title = "Pin header 1x16, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 1, pins = 16, style = "right-angle" }
aliases = ["1x16 right angle header", "1x16 right angle 2.54", "1x16 2.54mm right angle", "16 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x17-RA"
title = "Pin header 1x17, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 1, pins = 17, style = "right-angle" }
aliases = ["1x17 right angle header", "1x17 right angle 2.54", "1x17 2.54mm right angle", "17 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x18-RA"
title = "Pin header 1x18, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 1, pins = 18, style = "right-angle" }
aliases = ["1x18 right angle header", "1x18 right angle 2.54", "1x18 2.54mm right angle", "18 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x19-RA"
title = "Pin header 1x19, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 1, pins = 19, style = "right-angle" }
aliases = ["1x19 right angle header", "1x19 right angle 2.54", "1x19 2.54mm right angle", "19 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x20-RA"
title = "Pin header 1x20, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 1, pins = 20, style = "right-angle" }
aliases = ["1x20 right angle header", "1x20 right angle 2.54", "1x20 2.54mm right angle", "20 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x21-RA"
title = "Pin header 1x21, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 1, pins = 21, style = "right-angle" }
aliases = ["1x21 right angle header", "1x21 right angle 2.54", "1x21 2.54mm right angle", "21 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x22-RA"
title = "Pin header 1x22, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 1, pins = 22, style = "right-angle" }
aliases = ["1x22 right angle header", "1x22 right angle 2.54", "1x22 2.54mm right angle", "22 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x23-RA"
title = "Pin header 1x23, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 1, pins = 23, style = "right-angle" }
aliases = ["1x23 right angle header", "1x23 right angle 2.54", "1x23 2.54mm right angle", "23 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x24-RA"
title = "Pin header 1x24, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 1, pins = 24, style = "right-angle" }
aliases = ["1x24 right angle header", "1x24 right angle 2.54", "1x24 2.54mm right angle", "24 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x25-RA"
title = "Pin header 1x25, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 1, pins = 25, style = "right-angle" }
aliases = ["1x25 right angle header", "1x25 right angle 2.54", "1x25 2.54mm right angle", "25 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x26-RA"
title = "Pin header 1x26, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 1, pins = 26, style = "right-angle" }
aliases = ["1x26 right angle header", "1x26 right angle 2.54", "1x26 2.54mm right angle", "26 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x27-RA"
title = "Pin header 1x27, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 1, pins = 27, style = "right-angle" }
aliases = ["1x27 right angle header", "1x27 right angle 2.54", "1x27 2.54mm right angle", "27 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x28-RA"
title = "Pin header 1x28, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 1, pins = 28, style = "right-angle" }
aliases = ["1x28 right angle header", "1x28 right angle 2.54", "1x28 2.54mm right angle", "28 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x29-RA"
title = "Pin header 1x29, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 1, pins = 29, style = "right-angle" }
aliases = ["1x29 right angle header", "1x29 right angle 2.54", "1x29 2.54mm right angle", "29 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x30-RA"
title = "Pin header 1x30, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 1, pins = 30, style = "right-angle" }
aliases = ["1x30 right angle header", "1x30 right angle 2.54", "1x30 2.54mm right angle", "30 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x31-RA"
title = "Pin header 1x31, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 1, pins = 31, style = "right-angle" }
aliases = ["1x31 right angle header", "1x31 right angle 2.54", "1x31 2.54mm right angle", "31 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x32-RA"
title = "Pin header 1x32, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 1, pins = 32, style = "right-angle" }
aliases = ["1x32 right angle header", "1x32 right angle 2.54", "1x32 2.54mm right angle", "32 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x33-RA"
title = "Pin header 1x33, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 1, pins = 33, style = "right-angle" }
aliases = ["1x33 right angle header", "1x33 right angle 2.54", "1x33 2.54mm right angle", "33 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x34-RA"
title = "Pin header 1x34, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 1, pins = 34, style = "right-angle" }
aliases = ["1x34 right angle header", "1x34 right angle 2.54", "1x34 2.54mm right angle", "34 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x35-RA"
title = "Pin header 1x35, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 1, pins = 35, style = "right-angle" }
aliases = ["1x35 right angle header", "1x35 right angle 2.54", "1x35 2.54mm right angle", "35 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x36-RA"
title = "Pin header 1x36, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 1, pins = 36, style = "right-angle" }
aliases = ["1x36 right angle header", "1x36 right angle 2.54", "1x36 2.54mm right angle", "36 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x37-RA"
title = "Pin header 1x37, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 1, pins = 37, style = "right-angle" }
aliases = ["1x37 right angle header", "1x37 right angle 2.54", "1x37 2.54mm right angle", "37 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x38-RA"
title = "Pin header 1x38, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 1, pins = 38, style = "right-angle" }
aliases = ["1x38 right angle header", "1x38 right angle 2.54", "1x38 2.54mm right angle", "38 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x39-RA"
title = "Pin header 1x39, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 1, pins = 39, style = "right-angle" }
aliases = ["1x39 right angle header", "1x39 right angle 2.54", "1x39 2.54mm right angle", "39 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x40-RA"
title = "Pin header 1x40, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 1, pins = 40, style = "right-angle" }
aliases = ["1x40 right angle header", "1x40 right angle 2.54", "1x40 2.54mm right angle", "40 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x01-RA"
title = "Pin header 2x01, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 2, pins = 1, style = "right-angle" }
aliases = ["2x01 right angle header", "2x1 right angle header", "2x1 right angle 2.54", "2x01 2.54mm right angle", "2 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x02-RA"
title = "Pin header 2x02, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 2, pins = 2, style = "right-angle" }
aliases = ["2x02 right angle header", "2x2 right angle header", "2x2 right angle 2.54", "2x02 2.54mm right angle", "4 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x03-RA"
title = "Pin header 2x03, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 2, pins = 3, style = "right-angle" }
aliases = ["2x03 right angle header", "2x3 right angle header", "2x3 right angle 2.54", "2x03 2.54mm right angle", "6 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x04-RA"
title = "Pin header 2x04, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 2, pins = 4, style = "right-angle" }
aliases = ["2x04 right angle header", "2x4 right angle header", "2x4 right angle 2.54", "2x04 2.54mm right angle", "8 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x05-RA"
title = "Pin header 2x05, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 2, pins = 5, style = "right-angle" }
aliases = ["2x05 right angle header", "2x5 right angle header", "2x5 right angle 2.54", "2x05 2.54mm right angle", "10 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x06-RA"
title = "Pin header 2x06, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 2, pins = 6, style = "right-angle" }
aliases = ["2x06 right angle header", "2x6 right angle header", "2x6 right angle 2.54", "2x06 2.54mm right angle", "12 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x07-RA"
title = "Pin header 2x07, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 2, pins = 7, style = "right-angle" }
aliases = ["2x07 right angle header", "2x7 right angle header", "2x7 right angle 2.54", "2x07 2.54mm right angle", "14 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x08-RA"
title = "Pin header 2x08, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 2, pins = 8, style = "right-angle" }
aliases = ["2x08 right angle header", "2x8 right angle header", "2x8 right angle 2.54", "2x08 2.54mm right angle", "16 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x09-RA"
title = "Pin header 2x09, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 2, pins = 9, style = "right-angle" }
aliases = ["2x09 right angle header", "2x9 right angle header", "2x9 right angle 2.54", "2x09 2.54mm right angle", "18 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x10-RA"
title = "Pin header 2x10, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 2, pins = 10, style = "right-angle" }
aliases = ["2x10 right angle header", "2x10 right angle 2.54", "2x10 2.54mm right angle", "20 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x11-RA"
title = "Pin header 2x11, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 2, pins = 11, style = "right-angle" }
aliases = ["2x11 right angle header", "2x11 right angle 2.54", "2x11 2.54mm right angle", "22 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x12-RA"
title = "Pin header 2x12, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 2, pins = 12, style = "right-angle" }
aliases = ["2x12 right angle header", "2x12 right angle 2.54", "2x12 2.54mm right angle", "24 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x13-RA"
title = "Pin header 2x13, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 2, pins = 13, style = "right-angle" }
aliases = ["2x13 right angle header", "2x13 right angle 2.54", "2x13 2.54mm right angle", "26 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x14-RA"
title = "Pin header 2x14, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 2, pins = 14, style = "right-angle" }
aliases = ["2x14 right angle header", "2x14 right angle 2.54", "2x14 2.54mm right angle", "28 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x15-RA"
title = "Pin header 2x15, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 2, pins = 15, style = "right-angle" }
aliases = ["2x15 right angle header", "2x15 right angle 2.54", "2x15 2.54mm right angle", "30 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x16-RA"
title = "Pin header 2x16, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 2, pins = 16, style = "right-angle" }
aliases = ["2x16 right angle header", "2x16 right angle 2.54", "2x16 2.54mm right angle", "32 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x17-RA"
title = "Pin header 2x17, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 2, pins = 17, style = "right-angle" }
aliases = ["2x17 right angle header", "2x17 right angle 2.54", "2x17 2.54mm right angle", "34 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x18-RA"
title = "Pin header 2x18, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 2, pins = 18, style = "right-angle" }
aliases = ["2x18 right angle header", "2x18 right angle 2.54", "2x18 2.54mm right angle", "36 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x19-RA"
title = "Pin header 2x19, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 2, pins = 19, style = "right-angle" }
aliases = ["2x19 right angle header", "2x19 right angle 2.54", "2x19 2.54mm right angle", "38 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x20-RA"
title = "Pin header 2x20, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 2, pins = 20, style = "right-angle" }
aliases = ["2x20 right angle header", "2x20 right angle 2.54", "2x20 2.54mm right angle", "40 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x21-RA"
title = "Pin header 2x21, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 2, pins = 21, style = "right-angle" }
aliases = ["2x21 right angle header", "2x21 right angle 2.54", "2x21 2.54mm right angle", "42 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x22-RA"
title = "Pin header 2x22, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 2, pins = 22, style = "right-angle" }
aliases = ["2x22 right angle header", "2x22 right angle 2.54", "2x22 2.54mm right angle", "44 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x23-RA"
title = "Pin header 2x23, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 2, pins = 23, style = "right-angle" }
aliases = ["2x23 right angle header", "2x23 right angle 2.54", "2x23 2.54mm right angle", "46 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x24-RA"
title = "Pin header 2x24, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 2, pins = 24, style = "right-angle" }
aliases = ["2x24 right angle header", "2x24 right angle 2.54", "2x24 2.54mm right angle", "48 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x25-RA"
title = "Pin header 2x25, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 2, pins = 25, style = "right-angle" }
aliases = ["2x25 right angle header", "2x25 right angle 2.54", "2x25 2.54mm right angle", "50 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x26-RA"
title = "Pin header 2x26, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 2, pins = 26, style = "right-angle" }
aliases = ["2x26 right angle header", "2x26 right angle 2.54", "2x26 2.54mm right angle", "52 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x27-RA"
title = "Pin header 2x27, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 2, pins = 27, style = "right-angle" }
aliases = ["2x27 right angle header", "2x27 right angle 2.54", "2x27 2.54mm right angle", "54 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x28-RA"
title = "Pin header 2x28, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 2, pins = 28, style = "right-angle" }
aliases = ["2x28 right angle header", "2x28 right angle 2.54", "2x28 2.54mm right angle", "56 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x29-RA"
title = "Pin header 2x29, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 2, pins = 29, style = "right-angle" }
aliases = ["2x29 right angle header", "2x29 right angle 2.54", "2x29 2.54mm right angle", "58 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x30-RA"
title = "Pin header 2x30, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 2, pins = 30, style = "right-angle" }
aliases = ["2x30 right angle header", "2x30 right angle 2.54", "2x30 2.54mm right angle", "60 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x31-RA"
title = "Pin header 2x31, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 2, pins = 31, style = "right-angle" }
aliases = ["2x31 right angle header", "2x31 right angle 2.54", "2x31 2.54mm right angle", "62 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x32-RA"
title = "Pin header 2x32, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 2, pins = 32, style = "right-angle" }
aliases = ["2x32 right angle header", "2x32 right angle 2.54", "2x32 2.54mm right angle", "64 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x33-RA"
title = "Pin header 2x33, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 2, pins = 33, style = "right-angle" }
aliases = ["2x33 right angle header", "2x33 right angle 2.54", "2x33 2.54mm right angle", "66 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x34-RA"
title = "Pin header 2x34, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 2, pins = 34, style = "right-angle" }
aliases = ["2x34 right angle header", "2x34 right angle 2.54", "2x34 2.54mm right angle", "68 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x35-RA"
title = "Pin header 2x35, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 2, pins = 35, style = "right-angle" }
aliases = ["2x35 right angle header", "2x35 right angle 2.54", "2x35 2.54mm right angle", "70 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x36-RA"
title = "Pin header 2x36, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 2, pins = 36, style = "right-angle" }
aliases = ["2x36 right angle header", "2x36 right angle 2.54", "2x36 2.54mm right angle", "72 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x37-RA"
title = "Pin header 2x37, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 2, pins = 37, style = "right-angle" }
aliases = ["2x37 right angle header", "2x37 right angle 2.54", "2x37 2.54mm right angle", "74 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x38-RA"
title = "Pin header 2x38, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 2, pins = 38, style = "right-angle" }
aliases = ["2x38 right angle header", "2x38 right angle 2.54", "2x38 2.54mm right angle", "76 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x39-RA"
title = "Pin header 2x39, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 2, pins = 39, style = "right-angle" }
aliases = ["2x39 right angle header", "2x39 right angle 2.54", "2x39 2.54mm right angle", "78 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x40-RA"
title = "Pin header 2x40, 2.54 mm, right-angle"
params = { pitch = 2.54, rows = 2, pins = 40, style = "right-angle" }
aliases = ["2x40 right angle header", "2x40 right angle 2.54", "2x40 2.54mm right angle", "80 pin right angle header"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x01"
title = "Pin header 1x01, 2.54 mm"
params = { pitch = 2.54, rows = 1, pins = 1 }
aliases = ["1x01 2.54mm header", "1x1 header 2.54mm", "1x1 2.54", "1x01 pin header", "1x1 pin header", "1 pin header 2.54", "1 pin header 2.54mm", "2.54mm 1x1"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x02"
title = "Pin header 1x02, 2.54 mm"
params = { pitch = 2.54, rows = 1, pins = 2 }
aliases = ["1x02 2.54mm header", "1x2 header 2.54mm", "1x2 2.54", "1x02 pin header", "1x2 pin header", "2 pin header 2.54", "2 pin header 2.54mm", "2.54mm 1x2"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x03"
title = "Pin header 1x03, 2.54 mm"
params = { pitch = 2.54, rows = 1, pins = 3 }
aliases = ["1x03 2.54mm header", "1x3 header 2.54mm", "1x3 2.54", "1x03 pin header", "1x3 pin header", "3 pin header 2.54", "3 pin header 2.54mm", "2.54mm 1x3"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x04"
title = "Pin header 1x04, 2.54 mm"
params = { pitch = 2.54, rows = 1, pins = 4 }
aliases = ["1x04 2.54mm header", "1x4 header 2.54mm", "1x4 2.54", "1x04 pin header", "1x4 pin header", "4 pin header 2.54", "4 pin header 2.54mm", "2.54mm 1x4"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x05"
title = "Pin header 1x05, 2.54 mm"
params = { pitch = 2.54, rows = 1, pins = 5 }
aliases = ["1x05 2.54mm header", "1x5 header 2.54mm", "1x5 2.54", "1x05 pin header", "1x5 pin header", "5 pin header 2.54", "5 pin header 2.54mm", "2.54mm 1x5"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x06"
title = "Pin header 1x06, 2.54 mm"
params = { pitch = 2.54, rows = 1, pins = 6 }
aliases = ["1x06 2.54mm header", "1x6 header 2.54mm", "1x6 2.54", "1x06 pin header", "1x6 pin header", "6 pin header 2.54", "6 pin header 2.54mm", "2.54mm 1x6"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x07"
title = "Pin header 1x07, 2.54 mm"
params = { pitch = 2.54, rows = 1, pins = 7 }
aliases = ["1x07 2.54mm header", "1x7 header 2.54mm", "1x7 2.54", "1x07 pin header", "1x7 pin header", "7 pin header 2.54", "7 pin header 2.54mm", "2.54mm 1x7"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x08"
title = "Pin header 1x08, 2.54 mm"
params = { pitch = 2.54, rows = 1, pins = 8 }
aliases = ["1x08 2.54mm header", "1x8 header 2.54mm", "1x8 2.54", "1x08 pin header", "1x8 pin header", "8 pin header 2.54", "8 pin header 2.54mm", "2.54mm 1x8"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x09"
title = "Pin header 1x09, 2.54 mm"
params = { pitch = 2.54, rows = 1, pins = 9 }
aliases = ["1x09 2.54mm header", "1x9 header 2.54mm", "1x9 2.54", "1x09 pin header", "1x9 pin header", "9 pin header 2.54", "9 pin header 2.54mm", "2.54mm 1x9"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x10"
title = "Pin header 1x10, 2.54 mm"
params = { pitch = 2.54, rows = 1, pins = 10 }
aliases = ["1x10 2.54mm header", "1x10 header 2.54mm", "1x10 2.54", "1x10 pin header", "10 pin header 2.54", "10 pin header 2.54mm", "2.54mm 1x10"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x11"
title = "Pin header 1x11, 2.54 mm"
params = { pitch = 2.54, rows = 1, pins = 11 }
aliases = ["1x11 2.54mm header", "1x11 header 2.54mm", "1x11 2.54", "1x11 pin header", "11 pin header 2.54", "11 pin header 2.54mm", "2.54mm 1x11"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x12"
title = "Pin header 1x12, 2.54 mm"
params = { pitch = 2.54, rows = 1, pins = 12 }
aliases = ["1x12 2.54mm header", "1x12 header 2.54mm", "1x12 2.54", "1x12 pin header", "12 pin header 2.54", "12 pin header 2.54mm", "2.54mm 1x12"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x13"
title = "Pin header 1x13, 2.54 mm"
params = { pitch = 2.54, rows = 1, pins = 13 }
aliases = ["1x13 2.54mm header", "1x13 header 2.54mm", "1x13 2.54", "1x13 pin header", "13 pin header 2.54", "13 pin header 2.54mm", "2.54mm 1x13"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x14"
title = "Pin header 1x14, 2.54 mm"
params = { pitch = 2.54, rows = 1, pins = 14 }
aliases = ["1x14 2.54mm header", "1x14 header 2.54mm", "1x14 2.54", "1x14 pin header", "14 pin header 2.54", "14 pin header 2.54mm", "2.54mm 1x14"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x15"
title = "Pin header 1x15, 2.54 mm"
params = { pitch = 2.54, rows = 1, pins = 15 }
aliases = ["1x15 2.54mm header", "1x15 header 2.54mm", "1x15 2.54", "1x15 pin header", "15 pin header 2.54", "15 pin header 2.54mm", "2.54mm 1x15"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x16"
title = "Pin header 1x16, 2.54 mm"
params = { pitch = 2.54, rows = 1, pins = 16 }
aliases = ["1x16 2.54mm header", "1x16 header 2.54mm", "1x16 2.54", "1x16 pin header", "16 pin header 2.54", "16 pin header 2.54mm", "2.54mm 1x16"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x17"
title = "Pin header 1x17, 2.54 mm"
params = { pitch = 2.54, rows = 1, pins = 17 }
aliases = ["1x17 2.54mm header", "1x17 header 2.54mm", "1x17 2.54", "1x17 pin header", "17 pin header 2.54", "17 pin header 2.54mm", "2.54mm 1x17"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x18"
title = "Pin header 1x18, 2.54 mm"
params = { pitch = 2.54, rows = 1, pins = 18 }
aliases = ["1x18 2.54mm header", "1x18 header 2.54mm", "1x18 2.54", "1x18 pin header", "18 pin header 2.54", "18 pin header 2.54mm", "2.54mm 1x18"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x19"
title = "Pin header 1x19, 2.54 mm"
params = { pitch = 2.54, rows = 1, pins = 19 }
aliases = ["1x19 2.54mm header", "1x19 header 2.54mm", "1x19 2.54", "1x19 pin header", "19 pin header 2.54", "19 pin header 2.54mm", "2.54mm 1x19"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x20"
title = "Pin header 1x20, 2.54 mm"
params = { pitch = 2.54, rows = 1, pins = 20 }
aliases = ["1x20 2.54mm header", "1x20 header 2.54mm", "1x20 2.54", "1x20 pin header", "20 pin header 2.54", "20 pin header 2.54mm", "2.54mm 1x20"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x21"
title = "Pin header 1x21, 2.54 mm"
params = { pitch = 2.54, rows = 1, pins = 21 }
aliases = ["1x21 2.54mm header", "1x21 header 2.54mm", "1x21 2.54", "1x21 pin header", "21 pin header 2.54", "21 pin header 2.54mm", "2.54mm 1x21"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x22"
title = "Pin header 1x22, 2.54 mm"
params = { pitch = 2.54, rows = 1, pins = 22 }
aliases = ["1x22 2.54mm header", "1x22 header 2.54mm", "1x22 2.54", "1x22 pin header", "22 pin header 2.54", "22 pin header 2.54mm", "2.54mm 1x22"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x23"
title = "Pin header 1x23, 2.54 mm"
params = { pitch = 2.54, rows = 1, pins = 23 }
aliases = ["1x23 2.54mm header", "1x23 header 2.54mm", "1x23 2.54", "1x23 pin header", "23 pin header 2.54", "23 pin header 2.54mm", "2.54mm 1x23"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x24"
title = "Pin header 1x24, 2.54 mm"
params = { pitch = 2.54, rows = 1, pins = 24 }
aliases = ["1x24 2.54mm header", "1x24 header 2.54mm", "1x24 2.54", "1x24 pin header", "24 pin header 2.54", "24 pin header 2.54mm", "2.54mm 1x24"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x25"
title = "Pin header 1x25, 2.54 mm"
params = { pitch = 2.54, rows = 1, pins = 25 }
aliases = ["1x25 2.54mm header", "1x25 header 2.54mm", "1x25 2.54", "1x25 pin header", "25 pin header 2.54", "25 pin header 2.54mm", "2.54mm 1x25"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x26"
title = "Pin header 1x26, 2.54 mm"
params = { pitch = 2.54, rows = 1, pins = 26 }
aliases = ["1x26 2.54mm header", "1x26 header 2.54mm", "1x26 2.54", "1x26 pin header", "26 pin header 2.54", "26 pin header 2.54mm", "2.54mm 1x26"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x27"
title = "Pin header 1x27, 2.54 mm"
params = { pitch = 2.54, rows = 1, pins = 27 }
aliases = ["1x27 2.54mm header", "1x27 header 2.54mm", "1x27 2.54", "1x27 pin header", "27 pin header 2.54", "27 pin header 2.54mm", "2.54mm 1x27"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x28"
title = "Pin header 1x28, 2.54 mm"
params = { pitch = 2.54, rows = 1, pins = 28 }
aliases = ["1x28 2.54mm header", "1x28 header 2.54mm", "1x28 2.54", "1x28 pin header", "28 pin header 2.54", "28 pin header 2.54mm", "2.54mm 1x28"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x29"
title = "Pin header 1x29, 2.54 mm"
params = { pitch = 2.54, rows = 1, pins = 29 }
aliases = ["1x29 2.54mm header", "1x29 header 2.54mm", "1x29 2.54", "1x29 pin header", "29 pin header 2.54", "29 pin header 2.54mm", "2.54mm 1x29"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x30"
title = "Pin header 1x30, 2.54 mm"
params = { pitch = 2.54, rows = 1, pins = 30 }
aliases = ["1x30 2.54mm header", "1x30 header 2.54mm", "1x30 2.54", "1x30 pin header", "30 pin header 2.54", "30 pin header 2.54mm", "2.54mm 1x30"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x31"
title = "Pin header 1x31, 2.54 mm"
params = { pitch = 2.54, rows = 1, pins = 31 }
aliases = ["1x31 2.54mm header", "1x31 header 2.54mm", "1x31 2.54", "1x31 pin header", "31 pin header 2.54", "31 pin header 2.54mm", "2.54mm 1x31"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x32"
title = "Pin header 1x32, 2.54 mm"
params = { pitch = 2.54, rows = 1, pins = 32 }
aliases = ["1x32 2.54mm header", "1x32 header 2.54mm", "1x32 2.54", "1x32 pin header", "32 pin header 2.54", "32 pin header 2.54mm", "2.54mm 1x32"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x33"
title = "Pin header 1x33, 2.54 mm"
params = { pitch = 2.54, rows = 1, pins = 33 }
aliases = ["1x33 2.54mm header", "1x33 header 2.54mm", "1x33 2.54", "1x33 pin header", "33 pin header 2.54", "33 pin header 2.54mm", "2.54mm 1x33"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x34"
title = "Pin header 1x34, 2.54 mm"
params = { pitch = 2.54, rows = 1, pins = 34 }
aliases = ["1x34 2.54mm header", "1x34 header 2.54mm", "1x34 2.54", "1x34 pin header", "34 pin header 2.54", "34 pin header 2.54mm", "2.54mm 1x34"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x35"
title = "Pin header 1x35, 2.54 mm"
params = { pitch = 2.54, rows = 1, pins = 35 }
aliases = ["1x35 2.54mm header", "1x35 header 2.54mm", "1x35 2.54", "1x35 pin header", "35 pin header 2.54", "35 pin header 2.54mm", "2.54mm 1x35"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x36"
title = "Pin header 1x36, 2.54 mm"
params = { pitch = 2.54, rows = 1, pins = 36 }
aliases = ["1x36 2.54mm header", "1x36 header 2.54mm", "1x36 2.54", "1x36 pin header", "36 pin header 2.54", "36 pin header 2.54mm", "2.54mm 1x36"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x37"
title = "Pin header 1x37, 2.54 mm"
params = { pitch = 2.54, rows = 1, pins = 37 }
aliases = ["1x37 2.54mm header", "1x37 header 2.54mm", "1x37 2.54", "1x37 pin header", "37 pin header 2.54", "37 pin header 2.54mm", "2.54mm 1x37"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x38"
title = "Pin header 1x38, 2.54 mm"
params = { pitch = 2.54, rows = 1, pins = 38 }
aliases = ["1x38 2.54mm header", "1x38 header 2.54mm", "1x38 2.54", "1x38 pin header", "38 pin header 2.54", "38 pin header 2.54mm", "2.54mm 1x38"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x39"
title = "Pin header 1x39, 2.54 mm"
params = { pitch = 2.54, rows = 1, pins = 39 }
aliases = ["1x39 2.54mm header", "1x39 header 2.54mm", "1x39 2.54", "1x39 pin header", "39 pin header 2.54", "39 pin header 2.54mm", "2.54mm 1x39"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-1x40"
title = "Pin header 1x40, 2.54 mm"
params = { pitch = 2.54, rows = 1, pins = 40 }
aliases = ["1x40 2.54mm header", "1x40 header 2.54mm", "1x40 2.54", "1x40 pin header", "40 pin header 2.54", "40 pin header 2.54mm", "2.54mm 1x40"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x01"
title = "Pin header 2x01, 2.54 mm"
params = { pitch = 2.54, rows = 2, pins = 1 }
aliases = ["2x01 2.54mm header", "2x1 header 2.54mm", "2x1 2.54", "2x01 pin header", "2x1 pin header", "2 pin header 2.54", "2 pin header 2.54mm", "2.54mm 2x1"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x02"
title = "Pin header 2x02, 2.54 mm"
params = { pitch = 2.54, rows = 2, pins = 2 }
aliases = ["2x02 2.54mm header", "2x2 header 2.54mm", "2x2 2.54", "2x02 pin header", "2x2 pin header", "4 pin header 2.54", "4 pin header 2.54mm", "2.54mm 2x2"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x03"
title = "Pin header 2x03, 2.54 mm"
params = { pitch = 2.54, rows = 2, pins = 3 }
aliases = ["2x03 2.54mm header", "2x3 header 2.54mm", "2x3 2.54", "2x03 pin header", "2x3 pin header", "6 pin header 2.54", "6 pin header 2.54mm", "2.54mm 2x3"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x04"
title = "Pin header 2x04, 2.54 mm"
params = { pitch = 2.54, rows = 2, pins = 4 }
aliases = ["2x04 2.54mm header", "2x4 header 2.54mm", "2x4 2.54", "2x04 pin header", "2x4 pin header", "8 pin header 2.54", "8 pin header 2.54mm", "2.54mm 2x4"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x05"
title = "Pin header 2x05, 2.54 mm"
params = { pitch = 2.54, rows = 2, pins = 5 }
aliases = ["2x05 2.54mm header", "2x5 header 2.54mm", "2x5 2.54", "2x05 pin header", "2x5 pin header", "10 pin header 2.54", "10 pin header 2.54mm", "2.54mm 2x5"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x06"
title = "Pin header 2x06, 2.54 mm"
params = { pitch = 2.54, rows = 2, pins = 6 }
aliases = ["2x06 2.54mm header", "2x6 header 2.54mm", "2x6 2.54", "2x06 pin header", "2x6 pin header", "12 pin header 2.54", "12 pin header 2.54mm", "2.54mm 2x6"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x07"
title = "Pin header 2x07, 2.54 mm"
params = { pitch = 2.54, rows = 2, pins = 7 }
aliases = ["2x07 2.54mm header", "2x7 header 2.54mm", "2x7 2.54", "2x07 pin header", "2x7 pin header", "14 pin header 2.54", "14 pin header 2.54mm", "2.54mm 2x7"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x08"
title = "Pin header 2x08, 2.54 mm"
params = { pitch = 2.54, rows = 2, pins = 8 }
aliases = ["2x08 2.54mm header", "2x8 header 2.54mm", "2x8 2.54", "2x08 pin header", "2x8 pin header", "16 pin header 2.54", "16 pin header 2.54mm", "2.54mm 2x8"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x09"
title = "Pin header 2x09, 2.54 mm"
params = { pitch = 2.54, rows = 2, pins = 9 }
aliases = ["2x09 2.54mm header", "2x9 header 2.54mm", "2x9 2.54", "2x09 pin header", "2x9 pin header", "18 pin header 2.54", "18 pin header 2.54mm", "2.54mm 2x9"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x10"
title = "Pin header 2x10, 2.54 mm"
params = { pitch = 2.54, rows = 2, pins = 10 }
aliases = ["2x10 2.54mm header", "2x10 header 2.54mm", "2x10 2.54", "2x10 pin header", "20 pin header 2.54", "20 pin header 2.54mm", "2.54mm 2x10"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x11"
title = "Pin header 2x11, 2.54 mm"
params = { pitch = 2.54, rows = 2, pins = 11 }
aliases = ["2x11 2.54mm header", "2x11 header 2.54mm", "2x11 2.54", "2x11 pin header", "22 pin header 2.54", "22 pin header 2.54mm", "2.54mm 2x11"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x12"
title = "Pin header 2x12, 2.54 mm"
params = { pitch = 2.54, rows = 2, pins = 12 }
aliases = ["2x12 2.54mm header", "2x12 header 2.54mm", "2x12 2.54", "2x12 pin header", "24 pin header 2.54", "24 pin header 2.54mm", "2.54mm 2x12"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x13"
title = "Pin header 2x13, 2.54 mm"
params = { pitch = 2.54, rows = 2, pins = 13 }
aliases = ["2x13 2.54mm header", "2x13 header 2.54mm", "2x13 2.54", "2x13 pin header", "26 pin header 2.54", "26 pin header 2.54mm", "2.54mm 2x13"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x14"
title = "Pin header 2x14, 2.54 mm"
params = { pitch = 2.54, rows = 2, pins = 14 }
aliases = ["2x14 2.54mm header", "2x14 header 2.54mm", "2x14 2.54", "2x14 pin header", "28 pin header 2.54", "28 pin header 2.54mm", "2.54mm 2x14"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x15"
title = "Pin header 2x15, 2.54 mm"
params = { pitch = 2.54, rows = 2, pins = 15 }
aliases = ["2x15 2.54mm header", "2x15 header 2.54mm", "2x15 2.54", "2x15 pin header", "30 pin header 2.54", "30 pin header 2.54mm", "2.54mm 2x15"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x16"
title = "Pin header 2x16, 2.54 mm"
params = { pitch = 2.54, rows = 2, pins = 16 }
aliases = ["2x16 2.54mm header", "2x16 header 2.54mm", "2x16 2.54", "2x16 pin header", "32 pin header 2.54", "32 pin header 2.54mm", "2.54mm 2x16"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x17"
title = "Pin header 2x17, 2.54 mm"
params = { pitch = 2.54, rows = 2, pins = 17 }
aliases = ["2x17 2.54mm header", "2x17 header 2.54mm", "2x17 2.54", "2x17 pin header", "34 pin header 2.54", "34 pin header 2.54mm", "2.54mm 2x17"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x18"
title = "Pin header 2x18, 2.54 mm"
params = { pitch = 2.54, rows = 2, pins = 18 }
aliases = ["2x18 2.54mm header", "2x18 header 2.54mm", "2x18 2.54", "2x18 pin header", "36 pin header 2.54", "36 pin header 2.54mm", "2.54mm 2x18"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x19"
title = "Pin header 2x19, 2.54 mm"
params = { pitch = 2.54, rows = 2, pins = 19 }
aliases = ["2x19 2.54mm header", "2x19 header 2.54mm", "2x19 2.54", "2x19 pin header", "38 pin header 2.54", "38 pin header 2.54mm", "2.54mm 2x19"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x20"
title = "Pin header 2x20, 2.54 mm"
params = { pitch = 2.54, rows = 2, pins = 20 }
aliases = ["2x20 2.54mm header", "2x20 header 2.54mm", "2x20 2.54", "2x20 pin header", "40 pin header 2.54", "40 pin header 2.54mm", "2.54mm 2x20"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x21"
title = "Pin header 2x21, 2.54 mm"
params = { pitch = 2.54, rows = 2, pins = 21 }
aliases = ["2x21 2.54mm header", "2x21 header 2.54mm", "2x21 2.54", "2x21 pin header", "42 pin header 2.54", "42 pin header 2.54mm", "2.54mm 2x21"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x22"
title = "Pin header 2x22, 2.54 mm"
params = { pitch = 2.54, rows = 2, pins = 22 }
aliases = ["2x22 2.54mm header", "2x22 header 2.54mm", "2x22 2.54", "2x22 pin header", "44 pin header 2.54", "44 pin header 2.54mm", "2.54mm 2x22"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x23"
title = "Pin header 2x23, 2.54 mm"
params = { pitch = 2.54, rows = 2, pins = 23 }
aliases = ["2x23 2.54mm header", "2x23 header 2.54mm", "2x23 2.54", "2x23 pin header", "46 pin header 2.54", "46 pin header 2.54mm", "2.54mm 2x23"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x24"
title = "Pin header 2x24, 2.54 mm"
params = { pitch = 2.54, rows = 2, pins = 24 }
aliases = ["2x24 2.54mm header", "2x24 header 2.54mm", "2x24 2.54", "2x24 pin header", "48 pin header 2.54", "48 pin header 2.54mm", "2.54mm 2x24"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x25"
title = "Pin header 2x25, 2.54 mm"
params = { pitch = 2.54, rows = 2, pins = 25 }
aliases = ["2x25 2.54mm header", "2x25 header 2.54mm", "2x25 2.54", "2x25 pin header", "50 pin header 2.54", "50 pin header 2.54mm", "2.54mm 2x25"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x26"
title = "Pin header 2x26, 2.54 mm"
params = { pitch = 2.54, rows = 2, pins = 26 }
aliases = ["2x26 2.54mm header", "2x26 header 2.54mm", "2x26 2.54", "2x26 pin header", "52 pin header 2.54", "52 pin header 2.54mm", "2.54mm 2x26"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x27"
title = "Pin header 2x27, 2.54 mm"
params = { pitch = 2.54, rows = 2, pins = 27 }
aliases = ["2x27 2.54mm header", "2x27 header 2.54mm", "2x27 2.54", "2x27 pin header", "54 pin header 2.54", "54 pin header 2.54mm", "2.54mm 2x27"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x28"
title = "Pin header 2x28, 2.54 mm"
params = { pitch = 2.54, rows = 2, pins = 28 }
aliases = ["2x28 2.54mm header", "2x28 header 2.54mm", "2x28 2.54", "2x28 pin header", "56 pin header 2.54", "56 pin header 2.54mm", "2.54mm 2x28"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x29"
title = "Pin header 2x29, 2.54 mm"
params = { pitch = 2.54, rows = 2, pins = 29 }
aliases = ["2x29 2.54mm header", "2x29 header 2.54mm", "2x29 2.54", "2x29 pin header", "58 pin header 2.54", "58 pin header 2.54mm", "2.54mm 2x29"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x30"
title = "Pin header 2x30, 2.54 mm"
params = { pitch = 2.54, rows = 2, pins = 30 }
aliases = ["2x30 2.54mm header", "2x30 header 2.54mm", "2x30 2.54", "2x30 pin header", "60 pin header 2.54", "60 pin header 2.54mm", "2.54mm 2x30"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x31"
title = "Pin header 2x31, 2.54 mm"
params = { pitch = 2.54, rows = 2, pins = 31 }
aliases = ["2x31 2.54mm header", "2x31 header 2.54mm", "2x31 2.54", "2x31 pin header", "62 pin header 2.54", "62 pin header 2.54mm", "2.54mm 2x31"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x32"
title = "Pin header 2x32, 2.54 mm"
params = { pitch = 2.54, rows = 2, pins = 32 }
aliases = ["2x32 2.54mm header", "2x32 header 2.54mm", "2x32 2.54", "2x32 pin header", "64 pin header 2.54", "64 pin header 2.54mm", "2.54mm 2x32"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x33"
title = "Pin header 2x33, 2.54 mm"
params = { pitch = 2.54, rows = 2, pins = 33 }
aliases = ["2x33 2.54mm header", "2x33 header 2.54mm", "2x33 2.54", "2x33 pin header", "66 pin header 2.54", "66 pin header 2.54mm", "2.54mm 2x33"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x34"
title = "Pin header 2x34, 2.54 mm"
params = { pitch = 2.54, rows = 2, pins = 34 }
aliases = ["2x34 2.54mm header", "2x34 header 2.54mm", "2x34 2.54", "2x34 pin header", "68 pin header 2.54", "68 pin header 2.54mm", "2.54mm 2x34"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x35"
title = "Pin header 2x35, 2.54 mm"
params = { pitch = 2.54, rows = 2, pins = 35 }
aliases = ["2x35 2.54mm header", "2x35 header 2.54mm", "2x35 2.54", "2x35 pin header", "70 pin header 2.54", "70 pin header 2.54mm", "2.54mm 2x35"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x36"
title = "Pin header 2x36, 2.54 mm"
params = { pitch = 2.54, rows = 2, pins = 36 }
aliases = ["2x36 2.54mm header", "2x36 header 2.54mm", "2x36 2.54", "2x36 pin header", "72 pin header 2.54", "72 pin header 2.54mm", "2.54mm 2x36"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x37"
title = "Pin header 2x37, 2.54 mm"
params = { pitch = 2.54, rows = 2, pins = 37 }
aliases = ["2x37 2.54mm header", "2x37 header 2.54mm", "2x37 2.54", "2x37 pin header", "74 pin header 2.54", "74 pin header 2.54mm", "2.54mm 2x37"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x38"
title = "Pin header 2x38, 2.54 mm"
params = { pitch = 2.54, rows = 2, pins = 38 }
aliases = ["2x38 2.54mm header", "2x38 header 2.54mm", "2x38 2.54", "2x38 pin header", "76 pin header 2.54", "76 pin header 2.54mm", "2.54mm 2x38"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x39"
title = "Pin header 2x39, 2.54 mm"
params = { pitch = 2.54, rows = 2, pins = 39 }
aliases = ["2x39 2.54mm header", "2x39 header 2.54mm", "2x39 2.54", "2x39 pin header", "78 pin header 2.54", "78 pin header 2.54mm", "2.54mm 2x39"]
standard = "Samtec TSW"

[[presets]]
id = "2.54-2x40"
title = "Pin header 2x40, 2.54 mm"
params = { pitch = 2.54, rows = 2, pins = 40 }
aliases = ["2x40 2.54mm header", "2x40 header 2.54mm", "2x40 2.54", "2x40 pin header", "80 pin header 2.54", "80 pin header 2.54mm", "2.54mm 2x40"]
standard = "Samtec TSW"

[[presets]]
id = "2.00-1x01"
title = "Pin header 1x01, 2.00 mm"
params = { pitch = 2, rows = 1, pins = 1 }
aliases = ["1x01 2.00mm header", "1x1 header 2.00mm", "1x1 2.00", "1x01 pin header", "1x1 pin header", "1 pin header 2.00", "1 pin header 2.00mm", "2.00mm 1x1"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-1x02"
title = "Pin header 1x02, 2.00 mm"
params = { pitch = 2, rows = 1, pins = 2 }
aliases = ["1x02 2.00mm header", "1x2 header 2.00mm", "1x2 2.00", "1x02 pin header", "1x2 pin header", "2 pin header 2.00", "2 pin header 2.00mm", "2.00mm 1x2"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-1x03"
title = "Pin header 1x03, 2.00 mm"
params = { pitch = 2, rows = 1, pins = 3 }
aliases = ["1x03 2.00mm header", "1x3 header 2.00mm", "1x3 2.00", "1x03 pin header", "1x3 pin header", "3 pin header 2.00", "3 pin header 2.00mm", "2.00mm 1x3"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-1x04"
title = "Pin header 1x04, 2.00 mm"
params = { pitch = 2, rows = 1, pins = 4 }
aliases = ["1x04 2.00mm header", "1x4 header 2.00mm", "1x4 2.00", "1x04 pin header", "1x4 pin header", "4 pin header 2.00", "4 pin header 2.00mm", "2.00mm 1x4"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-1x05"
title = "Pin header 1x05, 2.00 mm"
params = { pitch = 2, rows = 1, pins = 5 }
aliases = ["1x05 2.00mm header", "1x5 header 2.00mm", "1x5 2.00", "1x05 pin header", "1x5 pin header", "5 pin header 2.00", "5 pin header 2.00mm", "2.00mm 1x5"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-1x06"
title = "Pin header 1x06, 2.00 mm"
params = { pitch = 2, rows = 1, pins = 6 }
aliases = ["1x06 2.00mm header", "1x6 header 2.00mm", "1x6 2.00", "1x06 pin header", "1x6 pin header", "6 pin header 2.00", "6 pin header 2.00mm", "2.00mm 1x6"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-1x07"
title = "Pin header 1x07, 2.00 mm"
params = { pitch = 2, rows = 1, pins = 7 }
aliases = ["1x07 2.00mm header", "1x7 header 2.00mm", "1x7 2.00", "1x07 pin header", "1x7 pin header", "7 pin header 2.00", "7 pin header 2.00mm", "2.00mm 1x7"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-1x08"
title = "Pin header 1x08, 2.00 mm"
params = { pitch = 2, rows = 1, pins = 8 }
aliases = ["1x08 2.00mm header", "1x8 header 2.00mm", "1x8 2.00", "1x08 pin header", "1x8 pin header", "8 pin header 2.00", "8 pin header 2.00mm", "2.00mm 1x8"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-1x09"
title = "Pin header 1x09, 2.00 mm"
params = { pitch = 2, rows = 1, pins = 9 }
aliases = ["1x09 2.00mm header", "1x9 header 2.00mm", "1x9 2.00", "1x09 pin header", "1x9 pin header", "9 pin header 2.00", "9 pin header 2.00mm", "2.00mm 1x9"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-1x10"
title = "Pin header 1x10, 2.00 mm"
params = { pitch = 2, rows = 1, pins = 10 }
aliases = ["1x10 2.00mm header", "1x10 header 2.00mm", "1x10 2.00", "1x10 pin header", "10 pin header 2.00", "10 pin header 2.00mm", "2.00mm 1x10"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-1x11"
title = "Pin header 1x11, 2.00 mm"
params = { pitch = 2, rows = 1, pins = 11 }
aliases = ["1x11 2.00mm header", "1x11 header 2.00mm", "1x11 2.00", "1x11 pin header", "11 pin header 2.00", "11 pin header 2.00mm", "2.00mm 1x11"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-1x12"
title = "Pin header 1x12, 2.00 mm"
params = { pitch = 2, rows = 1, pins = 12 }
aliases = ["1x12 2.00mm header", "1x12 header 2.00mm", "1x12 2.00", "1x12 pin header", "12 pin header 2.00", "12 pin header 2.00mm", "2.00mm 1x12"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-1x13"
title = "Pin header 1x13, 2.00 mm"
params = { pitch = 2, rows = 1, pins = 13 }
aliases = ["1x13 2.00mm header", "1x13 header 2.00mm", "1x13 2.00", "1x13 pin header", "13 pin header 2.00", "13 pin header 2.00mm", "2.00mm 1x13"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-1x14"
title = "Pin header 1x14, 2.00 mm"
params = { pitch = 2, rows = 1, pins = 14 }
aliases = ["1x14 2.00mm header", "1x14 header 2.00mm", "1x14 2.00", "1x14 pin header", "14 pin header 2.00", "14 pin header 2.00mm", "2.00mm 1x14"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-1x15"
title = "Pin header 1x15, 2.00 mm"
params = { pitch = 2, rows = 1, pins = 15 }
aliases = ["1x15 2.00mm header", "1x15 header 2.00mm", "1x15 2.00", "1x15 pin header", "15 pin header 2.00", "15 pin header 2.00mm", "2.00mm 1x15"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-1x16"
title = "Pin header 1x16, 2.00 mm"
params = { pitch = 2, rows = 1, pins = 16 }
aliases = ["1x16 2.00mm header", "1x16 header 2.00mm", "1x16 2.00", "1x16 pin header", "16 pin header 2.00", "16 pin header 2.00mm", "2.00mm 1x16"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-1x17"
title = "Pin header 1x17, 2.00 mm"
params = { pitch = 2, rows = 1, pins = 17 }
aliases = ["1x17 2.00mm header", "1x17 header 2.00mm", "1x17 2.00", "1x17 pin header", "17 pin header 2.00", "17 pin header 2.00mm", "2.00mm 1x17"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-1x18"
title = "Pin header 1x18, 2.00 mm"
params = { pitch = 2, rows = 1, pins = 18 }
aliases = ["1x18 2.00mm header", "1x18 header 2.00mm", "1x18 2.00", "1x18 pin header", "18 pin header 2.00", "18 pin header 2.00mm", "2.00mm 1x18"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-1x19"
title = "Pin header 1x19, 2.00 mm"
params = { pitch = 2, rows = 1, pins = 19 }
aliases = ["1x19 2.00mm header", "1x19 header 2.00mm", "1x19 2.00", "1x19 pin header", "19 pin header 2.00", "19 pin header 2.00mm", "2.00mm 1x19"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-1x20"
title = "Pin header 1x20, 2.00 mm"
params = { pitch = 2, rows = 1, pins = 20 }
aliases = ["1x20 2.00mm header", "1x20 header 2.00mm", "1x20 2.00", "1x20 pin header", "20 pin header 2.00", "20 pin header 2.00mm", "2.00mm 1x20"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-1x21"
title = "Pin header 1x21, 2.00 mm"
params = { pitch = 2, rows = 1, pins = 21 }
aliases = ["1x21 2.00mm header", "1x21 header 2.00mm", "1x21 2.00", "1x21 pin header", "21 pin header 2.00", "21 pin header 2.00mm", "2.00mm 1x21"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-1x22"
title = "Pin header 1x22, 2.00 mm"
params = { pitch = 2, rows = 1, pins = 22 }
aliases = ["1x22 2.00mm header", "1x22 header 2.00mm", "1x22 2.00", "1x22 pin header", "22 pin header 2.00", "22 pin header 2.00mm", "2.00mm 1x22"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-1x23"
title = "Pin header 1x23, 2.00 mm"
params = { pitch = 2, rows = 1, pins = 23 }
aliases = ["1x23 2.00mm header", "1x23 header 2.00mm", "1x23 2.00", "1x23 pin header", "23 pin header 2.00", "23 pin header 2.00mm", "2.00mm 1x23"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-1x24"
title = "Pin header 1x24, 2.00 mm"
params = { pitch = 2, rows = 1, pins = 24 }
aliases = ["1x24 2.00mm header", "1x24 header 2.00mm", "1x24 2.00", "1x24 pin header", "24 pin header 2.00", "24 pin header 2.00mm", "2.00mm 1x24"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-1x25"
title = "Pin header 1x25, 2.00 mm"
params = { pitch = 2, rows = 1, pins = 25 }
aliases = ["1x25 2.00mm header", "1x25 header 2.00mm", "1x25 2.00", "1x25 pin header", "25 pin header 2.00", "25 pin header 2.00mm", "2.00mm 1x25"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-1x26"
title = "Pin header 1x26, 2.00 mm"
params = { pitch = 2, rows = 1, pins = 26 }
aliases = ["1x26 2.00mm header", "1x26 header 2.00mm", "1x26 2.00", "1x26 pin header", "26 pin header 2.00", "26 pin header 2.00mm", "2.00mm 1x26"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-1x27"
title = "Pin header 1x27, 2.00 mm"
params = { pitch = 2, rows = 1, pins = 27 }
aliases = ["1x27 2.00mm header", "1x27 header 2.00mm", "1x27 2.00", "1x27 pin header", "27 pin header 2.00", "27 pin header 2.00mm", "2.00mm 1x27"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-1x28"
title = "Pin header 1x28, 2.00 mm"
params = { pitch = 2, rows = 1, pins = 28 }
aliases = ["1x28 2.00mm header", "1x28 header 2.00mm", "1x28 2.00", "1x28 pin header", "28 pin header 2.00", "28 pin header 2.00mm", "2.00mm 1x28"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-1x29"
title = "Pin header 1x29, 2.00 mm"
params = { pitch = 2, rows = 1, pins = 29 }
aliases = ["1x29 2.00mm header", "1x29 header 2.00mm", "1x29 2.00", "1x29 pin header", "29 pin header 2.00", "29 pin header 2.00mm", "2.00mm 1x29"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-1x30"
title = "Pin header 1x30, 2.00 mm"
params = { pitch = 2, rows = 1, pins = 30 }
aliases = ["1x30 2.00mm header", "1x30 header 2.00mm", "1x30 2.00", "1x30 pin header", "30 pin header 2.00", "30 pin header 2.00mm", "2.00mm 1x30"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-1x31"
title = "Pin header 1x31, 2.00 mm"
params = { pitch = 2, rows = 1, pins = 31 }
aliases = ["1x31 2.00mm header", "1x31 header 2.00mm", "1x31 2.00", "1x31 pin header", "31 pin header 2.00", "31 pin header 2.00mm", "2.00mm 1x31"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-1x32"
title = "Pin header 1x32, 2.00 mm"
params = { pitch = 2, rows = 1, pins = 32 }
aliases = ["1x32 2.00mm header", "1x32 header 2.00mm", "1x32 2.00", "1x32 pin header", "32 pin header 2.00", "32 pin header 2.00mm", "2.00mm 1x32"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-1x33"
title = "Pin header 1x33, 2.00 mm"
params = { pitch = 2, rows = 1, pins = 33 }
aliases = ["1x33 2.00mm header", "1x33 header 2.00mm", "1x33 2.00", "1x33 pin header", "33 pin header 2.00", "33 pin header 2.00mm", "2.00mm 1x33"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-1x34"
title = "Pin header 1x34, 2.00 mm"
params = { pitch = 2, rows = 1, pins = 34 }
aliases = ["1x34 2.00mm header", "1x34 header 2.00mm", "1x34 2.00", "1x34 pin header", "34 pin header 2.00", "34 pin header 2.00mm", "2.00mm 1x34"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-1x35"
title = "Pin header 1x35, 2.00 mm"
params = { pitch = 2, rows = 1, pins = 35 }
aliases = ["1x35 2.00mm header", "1x35 header 2.00mm", "1x35 2.00", "1x35 pin header", "35 pin header 2.00", "35 pin header 2.00mm", "2.00mm 1x35"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-1x36"
title = "Pin header 1x36, 2.00 mm"
params = { pitch = 2, rows = 1, pins = 36 }
aliases = ["1x36 2.00mm header", "1x36 header 2.00mm", "1x36 2.00", "1x36 pin header", "36 pin header 2.00", "36 pin header 2.00mm", "2.00mm 1x36"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-1x37"
title = "Pin header 1x37, 2.00 mm"
params = { pitch = 2, rows = 1, pins = 37 }
aliases = ["1x37 2.00mm header", "1x37 header 2.00mm", "1x37 2.00", "1x37 pin header", "37 pin header 2.00", "37 pin header 2.00mm", "2.00mm 1x37"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-1x38"
title = "Pin header 1x38, 2.00 mm"
params = { pitch = 2, rows = 1, pins = 38 }
aliases = ["1x38 2.00mm header", "1x38 header 2.00mm", "1x38 2.00", "1x38 pin header", "38 pin header 2.00", "38 pin header 2.00mm", "2.00mm 1x38"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-1x39"
title = "Pin header 1x39, 2.00 mm"
params = { pitch = 2, rows = 1, pins = 39 }
aliases = ["1x39 2.00mm header", "1x39 header 2.00mm", "1x39 2.00", "1x39 pin header", "39 pin header 2.00", "39 pin header 2.00mm", "2.00mm 1x39"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-1x40"
title = "Pin header 1x40, 2.00 mm"
params = { pitch = 2, rows = 1, pins = 40 }
aliases = ["1x40 2.00mm header", "1x40 header 2.00mm", "1x40 2.00", "1x40 pin header", "40 pin header 2.00", "40 pin header 2.00mm", "2.00mm 1x40"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-2x01"
title = "Pin header 2x01, 2.00 mm"
params = { pitch = 2, rows = 2, pins = 1 }
aliases = ["2x01 2.00mm header", "2x1 header 2.00mm", "2x1 2.00", "2x01 pin header", "2x1 pin header", "2 pin header 2.00", "2 pin header 2.00mm", "2.00mm 2x1"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-2x02"
title = "Pin header 2x02, 2.00 mm"
params = { pitch = 2, rows = 2, pins = 2 }
aliases = ["2x02 2.00mm header", "2x2 header 2.00mm", "2x2 2.00", "2x02 pin header", "2x2 pin header", "4 pin header 2.00", "4 pin header 2.00mm", "2.00mm 2x2"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-2x03"
title = "Pin header 2x03, 2.00 mm"
params = { pitch = 2, rows = 2, pins = 3 }
aliases = ["2x03 2.00mm header", "2x3 header 2.00mm", "2x3 2.00", "2x03 pin header", "2x3 pin header", "6 pin header 2.00", "6 pin header 2.00mm", "2.00mm 2x3"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-2x04"
title = "Pin header 2x04, 2.00 mm"
params = { pitch = 2, rows = 2, pins = 4 }
aliases = ["2x04 2.00mm header", "2x4 header 2.00mm", "2x4 2.00", "2x04 pin header", "2x4 pin header", "8 pin header 2.00", "8 pin header 2.00mm", "2.00mm 2x4"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-2x05"
title = "Pin header 2x05, 2.00 mm"
params = { pitch = 2, rows = 2, pins = 5 }
aliases = ["2x05 2.00mm header", "2x5 header 2.00mm", "2x5 2.00", "2x05 pin header", "2x5 pin header", "10 pin header 2.00", "10 pin header 2.00mm", "2.00mm 2x5"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-2x06"
title = "Pin header 2x06, 2.00 mm"
params = { pitch = 2, rows = 2, pins = 6 }
aliases = ["2x06 2.00mm header", "2x6 header 2.00mm", "2x6 2.00", "2x06 pin header", "2x6 pin header", "12 pin header 2.00", "12 pin header 2.00mm", "2.00mm 2x6"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-2x07"
title = "Pin header 2x07, 2.00 mm"
params = { pitch = 2, rows = 2, pins = 7 }
aliases = ["2x07 2.00mm header", "2x7 header 2.00mm", "2x7 2.00", "2x07 pin header", "2x7 pin header", "14 pin header 2.00", "14 pin header 2.00mm", "2.00mm 2x7"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-2x08"
title = "Pin header 2x08, 2.00 mm"
params = { pitch = 2, rows = 2, pins = 8 }
aliases = ["2x08 2.00mm header", "2x8 header 2.00mm", "2x8 2.00", "2x08 pin header", "2x8 pin header", "16 pin header 2.00", "16 pin header 2.00mm", "2.00mm 2x8"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-2x09"
title = "Pin header 2x09, 2.00 mm"
params = { pitch = 2, rows = 2, pins = 9 }
aliases = ["2x09 2.00mm header", "2x9 header 2.00mm", "2x9 2.00", "2x09 pin header", "2x9 pin header", "18 pin header 2.00", "18 pin header 2.00mm", "2.00mm 2x9"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-2x10"
title = "Pin header 2x10, 2.00 mm"
params = { pitch = 2, rows = 2, pins = 10 }
aliases = ["2x10 2.00mm header", "2x10 header 2.00mm", "2x10 2.00", "2x10 pin header", "20 pin header 2.00", "20 pin header 2.00mm", "2.00mm 2x10"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-2x11"
title = "Pin header 2x11, 2.00 mm"
params = { pitch = 2, rows = 2, pins = 11 }
aliases = ["2x11 2.00mm header", "2x11 header 2.00mm", "2x11 2.00", "2x11 pin header", "22 pin header 2.00", "22 pin header 2.00mm", "2.00mm 2x11"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-2x12"
title = "Pin header 2x12, 2.00 mm"
params = { pitch = 2, rows = 2, pins = 12 }
aliases = ["2x12 2.00mm header", "2x12 header 2.00mm", "2x12 2.00", "2x12 pin header", "24 pin header 2.00", "24 pin header 2.00mm", "2.00mm 2x12"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-2x13"
title = "Pin header 2x13, 2.00 mm"
params = { pitch = 2, rows = 2, pins = 13 }
aliases = ["2x13 2.00mm header", "2x13 header 2.00mm", "2x13 2.00", "2x13 pin header", "26 pin header 2.00", "26 pin header 2.00mm", "2.00mm 2x13"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-2x14"
title = "Pin header 2x14, 2.00 mm"
params = { pitch = 2, rows = 2, pins = 14 }
aliases = ["2x14 2.00mm header", "2x14 header 2.00mm", "2x14 2.00", "2x14 pin header", "28 pin header 2.00", "28 pin header 2.00mm", "2.00mm 2x14"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-2x15"
title = "Pin header 2x15, 2.00 mm"
params = { pitch = 2, rows = 2, pins = 15 }
aliases = ["2x15 2.00mm header", "2x15 header 2.00mm", "2x15 2.00", "2x15 pin header", "30 pin header 2.00", "30 pin header 2.00mm", "2.00mm 2x15"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-2x16"
title = "Pin header 2x16, 2.00 mm"
params = { pitch = 2, rows = 2, pins = 16 }
aliases = ["2x16 2.00mm header", "2x16 header 2.00mm", "2x16 2.00", "2x16 pin header", "32 pin header 2.00", "32 pin header 2.00mm", "2.00mm 2x16"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-2x17"
title = "Pin header 2x17, 2.00 mm"
params = { pitch = 2, rows = 2, pins = 17 }
aliases = ["2x17 2.00mm header", "2x17 header 2.00mm", "2x17 2.00", "2x17 pin header", "34 pin header 2.00", "34 pin header 2.00mm", "2.00mm 2x17"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-2x18"
title = "Pin header 2x18, 2.00 mm"
params = { pitch = 2, rows = 2, pins = 18 }
aliases = ["2x18 2.00mm header", "2x18 header 2.00mm", "2x18 2.00", "2x18 pin header", "36 pin header 2.00", "36 pin header 2.00mm", "2.00mm 2x18"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-2x19"
title = "Pin header 2x19, 2.00 mm"
params = { pitch = 2, rows = 2, pins = 19 }
aliases = ["2x19 2.00mm header", "2x19 header 2.00mm", "2x19 2.00", "2x19 pin header", "38 pin header 2.00", "38 pin header 2.00mm", "2.00mm 2x19"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-2x20"
title = "Pin header 2x20, 2.00 mm"
params = { pitch = 2, rows = 2, pins = 20 }
aliases = ["2x20 2.00mm header", "2x20 header 2.00mm", "2x20 2.00", "2x20 pin header", "40 pin header 2.00", "40 pin header 2.00mm", "2.00mm 2x20"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-2x21"
title = "Pin header 2x21, 2.00 mm"
params = { pitch = 2, rows = 2, pins = 21 }
aliases = ["2x21 2.00mm header", "2x21 header 2.00mm", "2x21 2.00", "2x21 pin header", "42 pin header 2.00", "42 pin header 2.00mm", "2.00mm 2x21"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-2x22"
title = "Pin header 2x22, 2.00 mm"
params = { pitch = 2, rows = 2, pins = 22 }
aliases = ["2x22 2.00mm header", "2x22 header 2.00mm", "2x22 2.00", "2x22 pin header", "44 pin header 2.00", "44 pin header 2.00mm", "2.00mm 2x22"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-2x23"
title = "Pin header 2x23, 2.00 mm"
params = { pitch = 2, rows = 2, pins = 23 }
aliases = ["2x23 2.00mm header", "2x23 header 2.00mm", "2x23 2.00", "2x23 pin header", "46 pin header 2.00", "46 pin header 2.00mm", "2.00mm 2x23"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-2x24"
title = "Pin header 2x24, 2.00 mm"
params = { pitch = 2, rows = 2, pins = 24 }
aliases = ["2x24 2.00mm header", "2x24 header 2.00mm", "2x24 2.00", "2x24 pin header", "48 pin header 2.00", "48 pin header 2.00mm", "2.00mm 2x24"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-2x25"
title = "Pin header 2x25, 2.00 mm"
params = { pitch = 2, rows = 2, pins = 25 }
aliases = ["2x25 2.00mm header", "2x25 header 2.00mm", "2x25 2.00", "2x25 pin header", "50 pin header 2.00", "50 pin header 2.00mm", "2.00mm 2x25"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-2x26"
title = "Pin header 2x26, 2.00 mm"
params = { pitch = 2, rows = 2, pins = 26 }
aliases = ["2x26 2.00mm header", "2x26 header 2.00mm", "2x26 2.00", "2x26 pin header", "52 pin header 2.00", "52 pin header 2.00mm", "2.00mm 2x26"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-2x27"
title = "Pin header 2x27, 2.00 mm"
params = { pitch = 2, rows = 2, pins = 27 }
aliases = ["2x27 2.00mm header", "2x27 header 2.00mm", "2x27 2.00", "2x27 pin header", "54 pin header 2.00", "54 pin header 2.00mm", "2.00mm 2x27"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-2x28"
title = "Pin header 2x28, 2.00 mm"
params = { pitch = 2, rows = 2, pins = 28 }
aliases = ["2x28 2.00mm header", "2x28 header 2.00mm", "2x28 2.00", "2x28 pin header", "56 pin header 2.00", "56 pin header 2.00mm", "2.00mm 2x28"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-2x29"
title = "Pin header 2x29, 2.00 mm"
params = { pitch = 2, rows = 2, pins = 29 }
aliases = ["2x29 2.00mm header", "2x29 header 2.00mm", "2x29 2.00", "2x29 pin header", "58 pin header 2.00", "58 pin header 2.00mm", "2.00mm 2x29"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-2x30"
title = "Pin header 2x30, 2.00 mm"
params = { pitch = 2, rows = 2, pins = 30 }
aliases = ["2x30 2.00mm header", "2x30 header 2.00mm", "2x30 2.00", "2x30 pin header", "60 pin header 2.00", "60 pin header 2.00mm", "2.00mm 2x30"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-2x31"
title = "Pin header 2x31, 2.00 mm"
params = { pitch = 2, rows = 2, pins = 31 }
aliases = ["2x31 2.00mm header", "2x31 header 2.00mm", "2x31 2.00", "2x31 pin header", "62 pin header 2.00", "62 pin header 2.00mm", "2.00mm 2x31"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-2x32"
title = "Pin header 2x32, 2.00 mm"
params = { pitch = 2, rows = 2, pins = 32 }
aliases = ["2x32 2.00mm header", "2x32 header 2.00mm", "2x32 2.00", "2x32 pin header", "64 pin header 2.00", "64 pin header 2.00mm", "2.00mm 2x32"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-2x33"
title = "Pin header 2x33, 2.00 mm"
params = { pitch = 2, rows = 2, pins = 33 }
aliases = ["2x33 2.00mm header", "2x33 header 2.00mm", "2x33 2.00", "2x33 pin header", "66 pin header 2.00", "66 pin header 2.00mm", "2.00mm 2x33"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-2x34"
title = "Pin header 2x34, 2.00 mm"
params = { pitch = 2, rows = 2, pins = 34 }
aliases = ["2x34 2.00mm header", "2x34 header 2.00mm", "2x34 2.00", "2x34 pin header", "68 pin header 2.00", "68 pin header 2.00mm", "2.00mm 2x34"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-2x35"
title = "Pin header 2x35, 2.00 mm"
params = { pitch = 2, rows = 2, pins = 35 }
aliases = ["2x35 2.00mm header", "2x35 header 2.00mm", "2x35 2.00", "2x35 pin header", "70 pin header 2.00", "70 pin header 2.00mm", "2.00mm 2x35"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-2x36"
title = "Pin header 2x36, 2.00 mm"
params = { pitch = 2, rows = 2, pins = 36 }
aliases = ["2x36 2.00mm header", "2x36 header 2.00mm", "2x36 2.00", "2x36 pin header", "72 pin header 2.00", "72 pin header 2.00mm", "2.00mm 2x36"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-2x37"
title = "Pin header 2x37, 2.00 mm"
params = { pitch = 2, rows = 2, pins = 37 }
aliases = ["2x37 2.00mm header", "2x37 header 2.00mm", "2x37 2.00", "2x37 pin header", "74 pin header 2.00", "74 pin header 2.00mm", "2.00mm 2x37"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-2x38"
title = "Pin header 2x38, 2.00 mm"
params = { pitch = 2, rows = 2, pins = 38 }
aliases = ["2x38 2.00mm header", "2x38 header 2.00mm", "2x38 2.00", "2x38 pin header", "76 pin header 2.00", "76 pin header 2.00mm", "2.00mm 2x38"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-2x39"
title = "Pin header 2x39, 2.00 mm"
params = { pitch = 2, rows = 2, pins = 39 }
aliases = ["2x39 2.00mm header", "2x39 header 2.00mm", "2x39 2.00", "2x39 pin header", "78 pin header 2.00", "78 pin header 2.00mm", "2.00mm 2x39"]
standard = "Samtec TMM"

[[presets]]
id = "2.00-2x40"
title = "Pin header 2x40, 2.00 mm"
params = { pitch = 2, rows = 2, pins = 40 }
aliases = ["2x40 2.00mm header", "2x40 header 2.00mm", "2x40 2.00", "2x40 pin header", "80 pin header 2.00", "80 pin header 2.00mm", "2.00mm 2x40"]
standard = "Samtec TMM"

[[presets]]
id = "2.54-1x08-simple"
title = "Pin header 1x08, 2.54 mm, simple"
params = { pitch = 2.54, rows = 1, pins = 8, detail = "simple" }
aliases = ["1x08 2.54mm simple"]
standard = "Samtec TSW"

README.md 18 lines · Markdown

Download

Pin header

A through-hole pin header, straight or right-angle. Right-angle: the tails and second row go along -Y, the posts along +Y, and the insulator stands on the XY plane.

Straight: Pin 1 is at the origin, the row runs along +X and the second row along +Y. The insulator's underside is on the XY plane, the mating posts point up and the tails go down through the board.

Source

2.54 mm: Samtec TSW/HTSW catalogue page (F-226), https://suddendocs.samtec.com/catalog_english/tsw_th.pdf, lead style -07: post above the insulator C 5.84, tail B 2.54, overall A 10.92, so the insulator is 2.54 high. Width 2.48 (one row), 5.02 (two rows). Post .025 in square, 0.64 mm.
2.54 mm right-angle: the same TSW/HTSW catalogue page, lead style -08-RA: post out from the insulator C 5.84, tail below the insulator E 2.29, tail to the insulator D 1.52, insulator height 3.02 (one row) and 5.56 (two rows).
2.00 mm: Samtec TMM catalogue page (F-226), https://suddendocs.samtec.com/catalog_english/tmm_th.pdf, lead style -02: C 3.00, B 3.70, A 8.20, insulator 1.50. Width 1.97 and 3.94.

Other headers of the same pitch differ in post and tail length, so check the one you buy.

Proportions, for looks only: the V notches between pins, the 2.00 mm post size of 0.50 mm, which that page doesn't print, and the right-angle insulator's depth, taken as the straight header's 2.54.

2.00 mm right-angle, surface-mount, 1.27 mm and 1.00 mm headers aren't here yet; see COVERAGE.md.

# Pin header

A through-hole pin header, straight or right-angle. Right-angle: the tails and second row go along -Y, the posts along +Y, and the insulator stands on the XY plane.

Straight: Pin 1 is at the origin, the row runs along +X and the second row along +Y. The insulator's underside is on the XY plane, the mating posts point up and the tails go down through the board.

## Source

- 2.54 mm: Samtec TSW/HTSW catalogue page (F-226), <https://suddendocs.samtec.com/catalog_english/tsw_th.pdf>, lead style -07: post above the insulator C 5.84, tail B 2.54, overall A 10.92, so the insulator is 2.54 high. Width 2.48 (one row), 5.02 (two rows). Post .025 in square, 0.64 mm.
- 2.54 mm right-angle: the same TSW/HTSW catalogue page, lead style -08-RA: post out from the insulator C 5.84, tail below the insulator E 2.29, tail to the insulator D 1.52, insulator height 3.02 (one row) and 5.56 (two rows).
- 2.00 mm: Samtec TMM catalogue page (F-226), <https://suddendocs.samtec.com/catalog_english/tmm_th.pdf>, lead style -02: C 3.00, B 3.70, A 8.20, insulator 1.50. Width 1.97 and 3.94.

Other headers of the same pitch differ in post and tail length, so check the one you buy.

**Proportions, for looks only:** the V notches between pins, the 2.00 mm post size of 0.50 mm, which that page doesn't print, and the right-angle insulator's depth, taken as the straight header's 2.54.

2.00 mm right-angle, surface-mount, 1.27 mm and 1.00 mm headers aren't here yet; see `COVERAGE.md`.

Use this part

STEVE

Open in STEVE

Open it in STEVE The STEVE runtime runs in STEVE: open the part there, or download the code and bundle.

Get the code

curl -o part.py "https://pythonparts.org/p/steve/pin-header/v/1.1.0/raw/part.py"

Raw files, bundle and API

curl "https://pythonparts.org/api/v1/parts/steve/pin-header/1.1.0"

The version's JSON (parameters, presets, files); add /build?name=value for a build at other values.

About this part

steve79 parts

Profile

Steel (generic)Carbon & alloy steels · Custom finish · 7.9 g/cm³

Mass: 1.2 g

At the parameters shown in the viewer.

License: MIT

Permissive: use, change and sell it; keep the copyright notice.

Runtime: STEVE
Requirements: None stated in the code
Built with: CadQuery 2.9.0.dev0
Published: Nov 5, 2026
Downloads: 0
Builds: 0
Stars: 0
Bundle: 2f152ef27a0d…

#pin-header #connector #header #board-to-board #electronics

Checks

PassedImports: steve

Every published part passes our checks before it’s listed. It is still code: read it before you use it.

Request a removal A copyright notice, or a trademark, confidential design, safety, malicious code or other problem. Report an illegal or prohibited item

Through-hole pin header, straight or right-angle, with square posts and a notched insulator. Pin 1 at the origin, row along +X. Heights and widths from Samtec's TSW and TMM pages. See the README.

Pin header

A through-hole pin header, straight or right-angle. Right-angle: the tails and second row go along -Y, the posts along +Y, and the insulator stands on the XY plane.

Straight: Pin 1 is at the origin, the row runs along +X and the second row along +Y. The insulator's underside is on the XY plane, the mating posts point up and the tails go down through the board.

Source

2.54 mm: Samtec TSW/HTSW catalogue page (F-226), https://suddendocs.samtec.com/catalog_english/tsw_th.pdf, lead style -07: post above the insulator C 5.84, tail B 2.54, overall A 10.92, so the insulator is 2.54 high. Width 2.48 (one row), 5.02 (two rows). Post .025 in square, 0.64 mm.
2.54 mm right-angle: the same TSW/HTSW catalogue page, lead style -08-RA: post out from the insulator C 5.84, tail below the insulator E 2.29, tail to the insulator D 1.52, insulator height 3.02 (one row) and 5.56 (two rows).
2.00 mm: Samtec TMM catalogue page (F-226), https://suddendocs.samtec.com/catalog_english/tmm_th.pdf, lead style -02: C 3.00, B 3.70, A 8.20, insulator 1.50. Width 1.97 and 3.94.

Other headers of the same pitch differ in post and tail length, so check the one you buy.

2.00 mm right-angle, surface-mount, 1.27 mm and 1.00 mm headers aren't here yet; see COVERAGE.md.

1.1.0 Latest Nov 5, 2026 · 1 minute ago Compare with 1.0.0

Right-angle 2.54 mm headers.
1.0.0 Nov 5, 2026 · 1 hour ago

More #pin-header

STEVEMIT

steve/pin-socket

Straight through-hole pin socket, 2.54 mm pitch, one or two rows, 1 to 40 pins per row.

0 81 sizes 0 7 minutes ago v1.0.0

STEVEMIT

steve/macropad-keyplate

Adafruit MacroPad RP2040 key plate (product 5128): 3 x 4 switch cut-outs, measured from Adafruit's published model.

0 1 size 0 4 days ago v1.0.0

STEVEMIT

steve/round-spacer

Round unthreaded clearance spacer for M3 screws (Harwin R30-601): Ø4.76 × Ø3.30, any length.

0 9 sizes 0 4 days ago v1.0.0

STEVEMIT

steve/pcb-card-guide

PCB card guide and board retaining clip, boards 1 to 2.4 mm, any length: simplified, measured from step.parts' models.

0 50 sizes 0 4 days ago v1.0.0

steve/pin-header

Pin header

Source

Pin header

Source

Related parts

steve/pin-socket

steve/macropad-keyplate

steve/round-spacer

steve/pcb-card-guide