steve/pluggable-terminal-header

PCB header for pluggable terminal blocks, Phoenix Contact MSTBA 2,5 type: right-angle, 5.0 and 5.08 mm pitch, 2 to 16 positions.

v1.0.0 STEVE MIT 0

Open in STEVE

Isometric

Parameters

Preset31 sizes

Pitch

5.05.08

Positions2–16

Detail

fullsimple

full: opening, mating pins and solder pins. simple: the housing's outline.

Defaults built

part.py 45 lines · Python · STEVE runtime · checked

Download

"""PCB header for pluggable terminal blocks, Phoenix Contact MSTBA 2,5 type: right-angle, 5.0 or 5.08 mm pitch, 2 to 16 positions. Pin 1 is at the origin, the row

along +X, the housing on the XY plane with its opening facing -Y, the solder pins down through the board. Dimensions from Phoenix Contact's data sheet in the README."""

from steve import Model

pitch = 5.08 # mm Pitch

positions = 2 # Positions

detail = "full" # full: the opening, the mating pins and the solder pins; simple: the housing's outline

# Phoenix Contact data sheet, MSTBA 2,5/ 2-G-5,08 (1757242), Dimensions p. 5 and Dimensional drawing p. 6: width a + 7 (5.0 mm) or a + 7.08 (5.08 mm), length 12,

# height 8.6 above the board, solder pins 3.5 long, 2 from the back face. The drawing gives the same housing for 5.0 and 5.08 mm pitch.

LENGTH, HEIGHT, PIN_LENGTH, PIN_FROM_BACK = 12, 8.6, 3.5, 2

PIN = 1.2 # the pin section, the wall and the mating pins' reach are proportions, for looks: the data sheet doesn't dimension them

SHORT = 1.5 # the mating pins stop this far short of the opening, where the plug's contacts meet them

WALL = 1.0

if pitch not in (5.0, 5.08) or not 2 <= positions <= 16:

raise ValueError("MSTBA 2,5 comes in 5.0 and 5.08 mm pitch, 2 to 16 positions.")

end = 3.5 if pitch == 5.0 else 3.54

width = (positions - 1) * pitch + 2 * end

x0 = -end

back = PIN_FROM_BACK

front = back - LENGTH

model = Model()

with model.sketch("housing_sketch", on="XY", name="Housing") as sk:

sk.rect("housing_rect", (x0, front), (x0 + width, back))

model.extrude("housing", "housing_sketch", distance=HEIGHT, name="Housing")

if detail == "full":

model.plane("opening_plane", on="XZ", offset=-front, name="Opening")

with model.sketch("opening_sketch", on="opening_plane", name="Opening") as sk:

sk.rect("opening_rect", (x0 + WALL, WALL), (x0 + width - WALL, HEIGHT - WALL))

model.extrude("opening", "opening_sketch", distance=-(LENGTH - 2 * WALL), op="cut", name="Opening")

z = HEIGHT / 2

model.plane("pins_plane", on="XZ", offset=-(back - WALL), name="Mating pins")

with model.sketch("pins_sketch", on="pins_plane", name="Mating pins") as sk:

for i in range(positions):

sk.rect(f"pin_{i}", (i * pitch - PIN / 2, z - PIN / 2), (i * pitch + PIN / 2, z + PIN / 2))

model.extrude("pins", "pins_sketch", distance=LENGTH - WALL - SHORT, name="Mating pins")

model.plane("solder_plane", on="XY", offset=-PIN_LENGTH, name="Solder pins")

with model.sketch("solder_sketch", on="solder_plane", name="Solder pins") as sk:

for i in range(positions):

sk.rect(f"solder_{i}", (i * pitch - PIN / 2, -PIN / 2), (i * pitch + PIN / 2, PIN / 2))

model.extrude("solder", "solder_sketch", distance=PIN_LENGTH + 1, name="Solder pins")

model.material("pa6", color="#2f7d4a")

result = model.result()

"""PCB header for pluggable terminal blocks, Phoenix Contact MSTBA 2,5 type: right-angle, 5.0 or 5.08 mm pitch, 2 to 16 positions. Pin 1 is at the origin, the row
along +X, the housing on the XY plane with its opening facing -Y, the solder pins down through the board. Dimensions from Phoenix Contact's data sheet in the README."""
from steve import Model

pitch = 5.08  # mm Pitch
positions = 2  # Positions
detail = "full"  # full: the opening, the mating pins and the solder pins; simple: the housing's outline

# Phoenix Contact data sheet, MSTBA 2,5/ 2-G-5,08 (1757242), Dimensions p. 5 and Dimensional drawing p. 6: width a + 7 (5.0 mm) or a + 7.08 (5.08 mm), length 12,
# height 8.6 above the board, solder pins 3.5 long, 2 from the back face. The drawing gives the same housing for 5.0 and 5.08 mm pitch.
LENGTH, HEIGHT, PIN_LENGTH, PIN_FROM_BACK = 12, 8.6, 3.5, 2
PIN = 1.2   # the pin section, the wall and the mating pins' reach are proportions, for looks: the data sheet doesn't dimension them
SHORT = 1.5   # the mating pins stop this far short of the opening, where the plug's contacts meet them
WALL = 1.0
if pitch not in (5.0, 5.08) or not 2 <= positions <= 16:
    raise ValueError("MSTBA 2,5 comes in 5.0 and 5.08 mm pitch, 2 to 16 positions.")

end = 3.5 if pitch == 5.0 else 3.54
width = (positions - 1) * pitch + 2 * end
x0 = -end
back = PIN_FROM_BACK
front = back - LENGTH
model = Model()
with model.sketch("housing_sketch", on="XY", name="Housing") as sk:
    sk.rect("housing_rect", (x0, front), (x0 + width, back))
model.extrude("housing", "housing_sketch", distance=HEIGHT, name="Housing")
if detail == "full":
    model.plane("opening_plane", on="XZ", offset=-front, name="Opening")
    with model.sketch("opening_sketch", on="opening_plane", name="Opening") as sk:
        sk.rect("opening_rect", (x0 + WALL, WALL), (x0 + width - WALL, HEIGHT - WALL))
    model.extrude("opening", "opening_sketch", distance=-(LENGTH - 2 * WALL), op="cut", name="Opening")
    z = HEIGHT / 2
    model.plane("pins_plane", on="XZ", offset=-(back - WALL), name="Mating pins")
    with model.sketch("pins_sketch", on="pins_plane", name="Mating pins") as sk:
        for i in range(positions):
            sk.rect(f"pin_{i}", (i * pitch - PIN / 2, z - PIN / 2), (i * pitch + PIN / 2, z + PIN / 2))
    model.extrude("pins", "pins_sketch", distance=LENGTH - WALL - SHORT, name="Mating pins")
    model.plane("solder_plane", on="XY", offset=-PIN_LENGTH, name="Solder pins")
    with model.sketch("solder_sketch", on="solder_plane", name="Solder pins") as sk:
        for i in range(positions):
            sk.rect(f"solder_{i}", (i * pitch - PIN / 2, -PIN / 2), (i * pitch + PIN / 2, PIN / 2))
    model.extrude("solder", "solder_sketch", distance=PIN_LENGTH + 1, name="Solder pins")
model.material("pa6", color="#2f7d4a")
result = model.result()

pypart.toml 29 lines · TOML

Download

name = "steve/pluggable-terminal-header"

version = "1.0.0"

runtime = "steve"

license = "MIT"

summary = "PCB header for pluggable terminal blocks, Phoenix Contact MSTBA 2,5 type: right-angle, 5.0 and 5.08 mm pitch, 2 to 16 positions."

description = """Right-angle PCB header of the MSTBA 2,5 type, with its opening, mating pins and solder pins. Width, length, height and pins from Phoenix Contact's data sheet. See the README."""

tags = ["terminal-block", "pluggable", "header", "phoenix", "mstb", "connector", "electronics"]

[parameters.pitch]

type = "choice"

default = 5.08

choices = [5.0, 5.08]

unit = "mm"

label = "Pitch"

[parameters.positions]

type = "integer"

default = 2

min = 2

max = 16

label = "Positions"

[parameters.detail]

type = "choice"

default = "full"

choices = ["full", "simple"]

label = "Detail"

description = "full: opening, mating pins and solder pins. simple: the housing's outline."

name = "steve/pluggable-terminal-header"
version = "1.0.0"
runtime = "steve"
license = "MIT"
summary = "PCB header for pluggable terminal blocks, Phoenix Contact MSTBA 2,5 type: right-angle, 5.0 and 5.08 mm pitch, 2 to 16 positions."
description = """Right-angle PCB header of the MSTBA 2,5 type, with its opening, mating pins and solder pins. Width, length, height and pins from Phoenix Contact's data sheet. See the README."""
tags = ["terminal-block", "pluggable", "header", "phoenix", "mstb", "connector", "electronics"]

[parameters.pitch]
type = "choice"
default = 5.08
choices = [5.0, 5.08]
unit = "mm"
label = "Pitch"

[parameters.positions]
type = "integer"
default = 2
min = 2
max = 16
label = "Positions"

[parameters.detail]
type = "choice"
default = "full"
choices = ["full", "simple"]
label = "Detail"
description = "full: opening, mating pins and solder pins. simple: the housing's outline."

presets.toml 219 lines · TOML

Download

# Presets of this part (factory/PRESETS.md). Written by factory/gen.py.

[[presets]]

id = "MSTBA2.5-2-G-5.0"

title = "Pluggable terminal header, 2 positions, 5.0 mm, right-angle (MSTBA 2,5)"

params = { pitch = 5, positions = 2 }

aliases = ["MSTBA 2,5/2-G-5,0", "MSTBA 2,5/2-G", "2 pin pluggable terminal header 5.0", "2 way pluggable terminal block 5.0mm", "2P pluggable header 5.0"]

standard = "Phoenix Contact"

[[presets]]

id = "MSTBA2.5-3-G-5.0"

title = "Pluggable terminal header, 3 positions, 5.0 mm, right-angle (MSTBA 2,5)"

params = { pitch = 5, positions = 3 }

aliases = ["MSTBA 2,5/3-G-5,0", "MSTBA 2,5/3-G", "3 pin pluggable terminal header 5.0", "3 way pluggable terminal block 5.0mm", "3P pluggable header 5.0"]

standard = "Phoenix Contact"

[[presets]]

id = "MSTBA2.5-4-G-5.0"

title = "Pluggable terminal header, 4 positions, 5.0 mm, right-angle (MSTBA 2,5)"

params = { pitch = 5, positions = 4 }

aliases = ["MSTBA 2,5/4-G-5,0", "MSTBA 2,5/4-G", "4 pin pluggable terminal header 5.0", "4 way pluggable terminal block 5.0mm", "4P pluggable header 5.0"]

standard = "Phoenix Contact"

[[presets]]

id = "MSTBA2.5-5-G-5.0"

title = "Pluggable terminal header, 5 positions, 5.0 mm, right-angle (MSTBA 2,5)"

params = { pitch = 5, positions = 5 }

aliases = ["MSTBA 2,5/5-G-5,0", "MSTBA 2,5/5-G", "5 pin pluggable terminal header 5.0", "5 way pluggable terminal block 5.0mm", "5P pluggable header 5.0"]

standard = "Phoenix Contact"

[[presets]]

id = "MSTBA2.5-6-G-5.0"

title = "Pluggable terminal header, 6 positions, 5.0 mm, right-angle (MSTBA 2,5)"

params = { pitch = 5, positions = 6 }

aliases = ["MSTBA 2,5/6-G-5,0", "MSTBA 2,5/6-G", "6 pin pluggable terminal header 5.0", "6 way pluggable terminal block 5.0mm", "6P pluggable header 5.0"]

standard = "Phoenix Contact"

[[presets]]

id = "MSTBA2.5-7-G-5.0"

title = "Pluggable terminal header, 7 positions, 5.0 mm, right-angle (MSTBA 2,5)"

params = { pitch = 5, positions = 7 }

aliases = ["MSTBA 2,5/7-G-5,0", "MSTBA 2,5/7-G", "7 pin pluggable terminal header 5.0", "7 way pluggable terminal block 5.0mm", "7P pluggable header 5.0"]

standard = "Phoenix Contact"

[[presets]]

id = "MSTBA2.5-8-G-5.0"

title = "Pluggable terminal header, 8 positions, 5.0 mm, right-angle (MSTBA 2,5)"

params = { pitch = 5, positions = 8 }

aliases = ["MSTBA 2,5/8-G-5,0", "MSTBA 2,5/8-G", "8 pin pluggable terminal header 5.0", "8 way pluggable terminal block 5.0mm", "8P pluggable header 5.0"]

standard = "Phoenix Contact"

[[presets]]

id = "MSTBA2.5-9-G-5.0"

title = "Pluggable terminal header, 9 positions, 5.0 mm, right-angle (MSTBA 2,5)"

params = { pitch = 5, positions = 9 }

aliases = ["MSTBA 2,5/9-G-5,0", "MSTBA 2,5/9-G", "9 pin pluggable terminal header 5.0", "9 way pluggable terminal block 5.0mm", "9P pluggable header 5.0"]

standard = "Phoenix Contact"

[[presets]]

id = "MSTBA2.5-10-G-5.0"

title = "Pluggable terminal header, 10 positions, 5.0 mm, right-angle (MSTBA 2,5)"

params = { pitch = 5, positions = 10 }

aliases = ["MSTBA 2,5/10-G-5,0", "MSTBA 2,5/10-G", "10 pin pluggable terminal header 5.0", "10 way pluggable terminal block 5.0mm", "10P pluggable header 5.0"]

standard = "Phoenix Contact"

[[presets]]

id = "MSTBA2.5-11-G-5.0"

title = "Pluggable terminal header, 11 positions, 5.0 mm, right-angle (MSTBA 2,5)"

params = { pitch = 5, positions = 11 }

aliases = ["MSTBA 2,5/11-G-5,0", "MSTBA 2,5/11-G", "11 pin pluggable terminal header 5.0", "11 way pluggable terminal block 5.0mm", "11P pluggable header 5.0"]

standard = "Phoenix Contact"

[[presets]]

id = "MSTBA2.5-12-G-5.0"

title = "Pluggable terminal header, 12 positions, 5.0 mm, right-angle (MSTBA 2,5)"

params = { pitch = 5, positions = 12 }

aliases = ["MSTBA 2,5/12-G-5,0", "MSTBA 2,5/12-G", "12 pin pluggable terminal header 5.0", "12 way pluggable terminal block 5.0mm", "12P pluggable header 5.0"]

standard = "Phoenix Contact"

[[presets]]

id = "MSTBA2.5-13-G-5.0"

title = "Pluggable terminal header, 13 positions, 5.0 mm, right-angle (MSTBA 2,5)"

params = { pitch = 5, positions = 13 }

aliases = ["MSTBA 2,5/13-G-5,0", "MSTBA 2,5/13-G", "13 pin pluggable terminal header 5.0", "13 way pluggable terminal block 5.0mm", "13P pluggable header 5.0"]

standard = "Phoenix Contact"

[[presets]]

id = "MSTBA2.5-14-G-5.0"

title = "Pluggable terminal header, 14 positions, 5.0 mm, right-angle (MSTBA 2,5)"

params = { pitch = 5, positions = 14 }

aliases = ["MSTBA 2,5/14-G-5,0", "MSTBA 2,5/14-G", "14 pin pluggable terminal header 5.0", "14 way pluggable terminal block 5.0mm", "14P pluggable header 5.0"]

standard = "Phoenix Contact"

[[presets]]

id = "MSTBA2.5-15-G-5.0"

title = "Pluggable terminal header, 15 positions, 5.0 mm, right-angle (MSTBA 2,5)"

params = { pitch = 5, positions = 15 }

aliases = ["MSTBA 2,5/15-G-5,0", "MSTBA 2,5/15-G", "15 pin pluggable terminal header 5.0", "15 way pluggable terminal block 5.0mm", "15P pluggable header 5.0"]

standard = "Phoenix Contact"

100

101

[[presets]]

102

id = "MSTBA2.5-16-G-5.0"

103

title = "Pluggable terminal header, 16 positions, 5.0 mm, right-angle (MSTBA 2,5)"

104

params = { pitch = 5, positions = 16 }

105

aliases = ["MSTBA 2,5/16-G-5,0", "MSTBA 2,5/16-G", "16 pin pluggable terminal header 5.0", "16 way pluggable terminal block 5.0mm", "16P pluggable header 5.0"]

106

standard = "Phoenix Contact"

107

108

[[presets]]

109

id = "MSTBA2.5-2-G-5.08"

110

title = "Pluggable terminal header, 2 positions, 5.08 mm, right-angle (MSTBA 2,5)"

111

params = { pitch = 5.08, positions = 2 }

112

aliases = ["MSTBA 2,5/2-G-5,08", "MSTBA 2,5/2-G", "2 pin pluggable terminal header 5.08", "2 way pluggable terminal block 5.08mm", "2P pluggable header 5.08"]

113

standard = "Phoenix Contact"

114

115

[[presets]]

116

id = "MSTBA2.5-3-G-5.08"

117

title = "Pluggable terminal header, 3 positions, 5.08 mm, right-angle (MSTBA 2,5)"

118

params = { pitch = 5.08, positions = 3 }

119

aliases = ["MSTBA 2,5/3-G-5,08", "MSTBA 2,5/3-G", "3 pin pluggable terminal header 5.08", "3 way pluggable terminal block 5.08mm", "3P pluggable header 5.08"]

120

standard = "Phoenix Contact"

121

122

[[presets]]

123

id = "MSTBA2.5-4-G-5.08"

124

title = "Pluggable terminal header, 4 positions, 5.08 mm, right-angle (MSTBA 2,5)"

125

params = { pitch = 5.08, positions = 4 }

126

aliases = ["MSTBA 2,5/4-G-5,08", "MSTBA 2,5/4-G", "4 pin pluggable terminal header 5.08", "4 way pluggable terminal block 5.08mm", "4P pluggable header 5.08"]

127

standard = "Phoenix Contact"

128

129

[[presets]]

130

id = "MSTBA2.5-5-G-5.08"

131

title = "Pluggable terminal header, 5 positions, 5.08 mm, right-angle (MSTBA 2,5)"

132

params = { pitch = 5.08, positions = 5 }

133

aliases = ["MSTBA 2,5/5-G-5,08", "MSTBA 2,5/5-G", "5 pin pluggable terminal header 5.08", "5 way pluggable terminal block 5.08mm", "5P pluggable header 5.08"]

134

standard = "Phoenix Contact"

135

136

[[presets]]

137

id = "MSTBA2.5-6-G-5.08"

138

title = "Pluggable terminal header, 6 positions, 5.08 mm, right-angle (MSTBA 2,5)"

139

params = { pitch = 5.08, positions = 6 }

140

aliases = ["MSTBA 2,5/6-G-5,08", "MSTBA 2,5/6-G", "6 pin pluggable terminal header 5.08", "6 way pluggable terminal block 5.08mm", "6P pluggable header 5.08"]

141

standard = "Phoenix Contact"

142

143

[[presets]]

144

id = "MSTBA2.5-7-G-5.08"

145

title = "Pluggable terminal header, 7 positions, 5.08 mm, right-angle (MSTBA 2,5)"

146

params = { pitch = 5.08, positions = 7 }

147

aliases = ["MSTBA 2,5/7-G-5,08", "MSTBA 2,5/7-G", "7 pin pluggable terminal header 5.08", "7 way pluggable terminal block 5.08mm", "7P pluggable header 5.08"]

148

standard = "Phoenix Contact"

149

150

[[presets]]

151

id = "MSTBA2.5-8-G-5.08"

152

title = "Pluggable terminal header, 8 positions, 5.08 mm, right-angle (MSTBA 2,5)"

153

params = { pitch = 5.08, positions = 8 }

154

aliases = ["MSTBA 2,5/8-G-5,08", "MSTBA 2,5/8-G", "8 pin pluggable terminal header 5.08", "8 way pluggable terminal block 5.08mm", "8P pluggable header 5.08"]

155

standard = "Phoenix Contact"

156

157

[[presets]]

158

id = "MSTBA2.5-9-G-5.08"

159

title = "Pluggable terminal header, 9 positions, 5.08 mm, right-angle (MSTBA 2,5)"

160

params = { pitch = 5.08, positions = 9 }

161

aliases = ["MSTBA 2,5/9-G-5,08", "MSTBA 2,5/9-G", "9 pin pluggable terminal header 5.08", "9 way pluggable terminal block 5.08mm", "9P pluggable header 5.08"]

162

standard = "Phoenix Contact"

163

164

[[presets]]

165

id = "MSTBA2.5-10-G-5.08"

166

title = "Pluggable terminal header, 10 positions, 5.08 mm, right-angle (MSTBA 2,5)"

167

params = { pitch = 5.08, positions = 10 }

168

aliases = ["MSTBA 2,5/10-G-5,08", "MSTBA 2,5/10-G", "10 pin pluggable terminal header 5.08", "10 way pluggable terminal block 5.08mm", "10P pluggable header 5.08"]

169

standard = "Phoenix Contact"

170

171

[[presets]]

172

id = "MSTBA2.5-11-G-5.08"

173

title = "Pluggable terminal header, 11 positions, 5.08 mm, right-angle (MSTBA 2,5)"

174

params = { pitch = 5.08, positions = 11 }

175

aliases = ["MSTBA 2,5/11-G-5,08", "MSTBA 2,5/11-G", "11 pin pluggable terminal header 5.08", "11 way pluggable terminal block 5.08mm", "11P pluggable header 5.08"]

176

standard = "Phoenix Contact"

177

178

[[presets]]

179

id = "MSTBA2.5-12-G-5.08"

180

title = "Pluggable terminal header, 12 positions, 5.08 mm, right-angle (MSTBA 2,5)"

181

params = { pitch = 5.08, positions = 12 }

182

aliases = ["MSTBA 2,5/12-G-5,08", "MSTBA 2,5/12-G", "12 pin pluggable terminal header 5.08", "12 way pluggable terminal block 5.08mm", "12P pluggable header 5.08"]

183

standard = "Phoenix Contact"

184

185

[[presets]]

186

id = "MSTBA2.5-13-G-5.08"

187

title = "Pluggable terminal header, 13 positions, 5.08 mm, right-angle (MSTBA 2,5)"

188

params = { pitch = 5.08, positions = 13 }

189

aliases = ["MSTBA 2,5/13-G-5,08", "MSTBA 2,5/13-G", "13 pin pluggable terminal header 5.08", "13 way pluggable terminal block 5.08mm", "13P pluggable header 5.08"]

190

standard = "Phoenix Contact"

191

192

[[presets]]

193

id = "MSTBA2.5-14-G-5.08"

194

title = "Pluggable terminal header, 14 positions, 5.08 mm, right-angle (MSTBA 2,5)"

195

params = { pitch = 5.08, positions = 14 }

196

aliases = ["MSTBA 2,5/14-G-5,08", "MSTBA 2,5/14-G", "14 pin pluggable terminal header 5.08", "14 way pluggable terminal block 5.08mm", "14P pluggable header 5.08"]

197

standard = "Phoenix Contact"

198

199

[[presets]]

200

id = "MSTBA2.5-15-G-5.08"

201

title = "Pluggable terminal header, 15 positions, 5.08 mm, right-angle (MSTBA 2,5)"

202

params = { pitch = 5.08, positions = 15 }

203

aliases = ["MSTBA 2,5/15-G-5,08", "MSTBA 2,5/15-G", "15 pin pluggable terminal header 5.08", "15 way pluggable terminal block 5.08mm", "15P pluggable header 5.08"]

204

standard = "Phoenix Contact"

205

206

[[presets]]

207

id = "MSTBA2.5-16-G-5.08"

208

title = "Pluggable terminal header, 16 positions, 5.08 mm, right-angle (MSTBA 2,5)"

209

params = { pitch = 5.08, positions = 16 }

210

aliases = ["MSTBA 2,5/16-G-5,08", "MSTBA 2,5/16-G", "16 pin pluggable terminal header 5.08", "16 way pluggable terminal block 5.08mm", "16P pluggable header 5.08"]

211

standard = "Phoenix Contact"

212

213

[[presets]]

214

id = "MSTBA2.5-2-G-5.08-simple"

215

title = "Pluggable terminal header, 2 positions, 5.08 mm, simple"

216

params = { pitch = 5.08, positions = 2, detail = "simple" }

217

aliases = ["MSTBA 2,5/2-G-5,08 simple"]

218

standard = "Phoenix Contact"

219

# Presets of this part (factory/PRESETS.md). Written by factory/gen.py.

[[presets]]
id = "MSTBA2.5-2-G-5.0"
title = "Pluggable terminal header, 2 positions, 5.0 mm, right-angle (MSTBA 2,5)"
params = { pitch = 5, positions = 2 }
aliases = ["MSTBA 2,5/2-G-5,0", "MSTBA 2,5/2-G", "2 pin pluggable terminal header 5.0", "2 way pluggable terminal block 5.0mm", "2P pluggable header 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-3-G-5.0"
title = "Pluggable terminal header, 3 positions, 5.0 mm, right-angle (MSTBA 2,5)"
params = { pitch = 5, positions = 3 }
aliases = ["MSTBA 2,5/3-G-5,0", "MSTBA 2,5/3-G", "3 pin pluggable terminal header 5.0", "3 way pluggable terminal block 5.0mm", "3P pluggable header 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-4-G-5.0"
title = "Pluggable terminal header, 4 positions, 5.0 mm, right-angle (MSTBA 2,5)"
params = { pitch = 5, positions = 4 }
aliases = ["MSTBA 2,5/4-G-5,0", "MSTBA 2,5/4-G", "4 pin pluggable terminal header 5.0", "4 way pluggable terminal block 5.0mm", "4P pluggable header 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-5-G-5.0"
title = "Pluggable terminal header, 5 positions, 5.0 mm, right-angle (MSTBA 2,5)"
params = { pitch = 5, positions = 5 }
aliases = ["MSTBA 2,5/5-G-5,0", "MSTBA 2,5/5-G", "5 pin pluggable terminal header 5.0", "5 way pluggable terminal block 5.0mm", "5P pluggable header 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-6-G-5.0"
title = "Pluggable terminal header, 6 positions, 5.0 mm, right-angle (MSTBA 2,5)"
params = { pitch = 5, positions = 6 }
aliases = ["MSTBA 2,5/6-G-5,0", "MSTBA 2,5/6-G", "6 pin pluggable terminal header 5.0", "6 way pluggable terminal block 5.0mm", "6P pluggable header 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-7-G-5.0"
title = "Pluggable terminal header, 7 positions, 5.0 mm, right-angle (MSTBA 2,5)"
params = { pitch = 5, positions = 7 }
aliases = ["MSTBA 2,5/7-G-5,0", "MSTBA 2,5/7-G", "7 pin pluggable terminal header 5.0", "7 way pluggable terminal block 5.0mm", "7P pluggable header 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-8-G-5.0"
title = "Pluggable terminal header, 8 positions, 5.0 mm, right-angle (MSTBA 2,5)"
params = { pitch = 5, positions = 8 }
aliases = ["MSTBA 2,5/8-G-5,0", "MSTBA 2,5/8-G", "8 pin pluggable terminal header 5.0", "8 way pluggable terminal block 5.0mm", "8P pluggable header 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-9-G-5.0"
title = "Pluggable terminal header, 9 positions, 5.0 mm, right-angle (MSTBA 2,5)"
params = { pitch = 5, positions = 9 }
aliases = ["MSTBA 2,5/9-G-5,0", "MSTBA 2,5/9-G", "9 pin pluggable terminal header 5.0", "9 way pluggable terminal block 5.0mm", "9P pluggable header 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-10-G-5.0"
title = "Pluggable terminal header, 10 positions, 5.0 mm, right-angle (MSTBA 2,5)"
params = { pitch = 5, positions = 10 }
aliases = ["MSTBA 2,5/10-G-5,0", "MSTBA 2,5/10-G", "10 pin pluggable terminal header 5.0", "10 way pluggable terminal block 5.0mm", "10P pluggable header 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-11-G-5.0"
title = "Pluggable terminal header, 11 positions, 5.0 mm, right-angle (MSTBA 2,5)"
params = { pitch = 5, positions = 11 }
aliases = ["MSTBA 2,5/11-G-5,0", "MSTBA 2,5/11-G", "11 pin pluggable terminal header 5.0", "11 way pluggable terminal block 5.0mm", "11P pluggable header 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-12-G-5.0"
title = "Pluggable terminal header, 12 positions, 5.0 mm, right-angle (MSTBA 2,5)"
params = { pitch = 5, positions = 12 }
aliases = ["MSTBA 2,5/12-G-5,0", "MSTBA 2,5/12-G", "12 pin pluggable terminal header 5.0", "12 way pluggable terminal block 5.0mm", "12P pluggable header 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-13-G-5.0"
title = "Pluggable terminal header, 13 positions, 5.0 mm, right-angle (MSTBA 2,5)"
params = { pitch = 5, positions = 13 }
aliases = ["MSTBA 2,5/13-G-5,0", "MSTBA 2,5/13-G", "13 pin pluggable terminal header 5.0", "13 way pluggable terminal block 5.0mm", "13P pluggable header 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-14-G-5.0"
title = "Pluggable terminal header, 14 positions, 5.0 mm, right-angle (MSTBA 2,5)"
params = { pitch = 5, positions = 14 }
aliases = ["MSTBA 2,5/14-G-5,0", "MSTBA 2,5/14-G", "14 pin pluggable terminal header 5.0", "14 way pluggable terminal block 5.0mm", "14P pluggable header 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-15-G-5.0"
title = "Pluggable terminal header, 15 positions, 5.0 mm, right-angle (MSTBA 2,5)"
params = { pitch = 5, positions = 15 }
aliases = ["MSTBA 2,5/15-G-5,0", "MSTBA 2,5/15-G", "15 pin pluggable terminal header 5.0", "15 way pluggable terminal block 5.0mm", "15P pluggable header 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-16-G-5.0"
title = "Pluggable terminal header, 16 positions, 5.0 mm, right-angle (MSTBA 2,5)"
params = { pitch = 5, positions = 16 }
aliases = ["MSTBA 2,5/16-G-5,0", "MSTBA 2,5/16-G", "16 pin pluggable terminal header 5.0", "16 way pluggable terminal block 5.0mm", "16P pluggable header 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-2-G-5.08"
title = "Pluggable terminal header, 2 positions, 5.08 mm, right-angle (MSTBA 2,5)"
params = { pitch = 5.08, positions = 2 }
aliases = ["MSTBA 2,5/2-G-5,08", "MSTBA 2,5/2-G", "2 pin pluggable terminal header 5.08", "2 way pluggable terminal block 5.08mm", "2P pluggable header 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-3-G-5.08"
title = "Pluggable terminal header, 3 positions, 5.08 mm, right-angle (MSTBA 2,5)"
params = { pitch = 5.08, positions = 3 }
aliases = ["MSTBA 2,5/3-G-5,08", "MSTBA 2,5/3-G", "3 pin pluggable terminal header 5.08", "3 way pluggable terminal block 5.08mm", "3P pluggable header 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-4-G-5.08"
title = "Pluggable terminal header, 4 positions, 5.08 mm, right-angle (MSTBA 2,5)"
params = { pitch = 5.08, positions = 4 }
aliases = ["MSTBA 2,5/4-G-5,08", "MSTBA 2,5/4-G", "4 pin pluggable terminal header 5.08", "4 way pluggable terminal block 5.08mm", "4P pluggable header 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-5-G-5.08"
title = "Pluggable terminal header, 5 positions, 5.08 mm, right-angle (MSTBA 2,5)"
params = { pitch = 5.08, positions = 5 }
aliases = ["MSTBA 2,5/5-G-5,08", "MSTBA 2,5/5-G", "5 pin pluggable terminal header 5.08", "5 way pluggable terminal block 5.08mm", "5P pluggable header 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-6-G-5.08"
title = "Pluggable terminal header, 6 positions, 5.08 mm, right-angle (MSTBA 2,5)"
params = { pitch = 5.08, positions = 6 }
aliases = ["MSTBA 2,5/6-G-5,08", "MSTBA 2,5/6-G", "6 pin pluggable terminal header 5.08", "6 way pluggable terminal block 5.08mm", "6P pluggable header 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-7-G-5.08"
title = "Pluggable terminal header, 7 positions, 5.08 mm, right-angle (MSTBA 2,5)"
params = { pitch = 5.08, positions = 7 }
aliases = ["MSTBA 2,5/7-G-5,08", "MSTBA 2,5/7-G", "7 pin pluggable terminal header 5.08", "7 way pluggable terminal block 5.08mm", "7P pluggable header 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-8-G-5.08"
title = "Pluggable terminal header, 8 positions, 5.08 mm, right-angle (MSTBA 2,5)"
params = { pitch = 5.08, positions = 8 }
aliases = ["MSTBA 2,5/8-G-5,08", "MSTBA 2,5/8-G", "8 pin pluggable terminal header 5.08", "8 way pluggable terminal block 5.08mm", "8P pluggable header 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-9-G-5.08"
title = "Pluggable terminal header, 9 positions, 5.08 mm, right-angle (MSTBA 2,5)"
params = { pitch = 5.08, positions = 9 }
aliases = ["MSTBA 2,5/9-G-5,08", "MSTBA 2,5/9-G", "9 pin pluggable terminal header 5.08", "9 way pluggable terminal block 5.08mm", "9P pluggable header 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-10-G-5.08"
title = "Pluggable terminal header, 10 positions, 5.08 mm, right-angle (MSTBA 2,5)"
params = { pitch = 5.08, positions = 10 }
aliases = ["MSTBA 2,5/10-G-5,08", "MSTBA 2,5/10-G", "10 pin pluggable terminal header 5.08", "10 way pluggable terminal block 5.08mm", "10P pluggable header 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-11-G-5.08"
title = "Pluggable terminal header, 11 positions, 5.08 mm, right-angle (MSTBA 2,5)"
params = { pitch = 5.08, positions = 11 }
aliases = ["MSTBA 2,5/11-G-5,08", "MSTBA 2,5/11-G", "11 pin pluggable terminal header 5.08", "11 way pluggable terminal block 5.08mm", "11P pluggable header 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-12-G-5.08"
title = "Pluggable terminal header, 12 positions, 5.08 mm, right-angle (MSTBA 2,5)"
params = { pitch = 5.08, positions = 12 }
aliases = ["MSTBA 2,5/12-G-5,08", "MSTBA 2,5/12-G", "12 pin pluggable terminal header 5.08", "12 way pluggable terminal block 5.08mm", "12P pluggable header 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-13-G-5.08"
title = "Pluggable terminal header, 13 positions, 5.08 mm, right-angle (MSTBA 2,5)"
params = { pitch = 5.08, positions = 13 }
aliases = ["MSTBA 2,5/13-G-5,08", "MSTBA 2,5/13-G", "13 pin pluggable terminal header 5.08", "13 way pluggable terminal block 5.08mm", "13P pluggable header 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-14-G-5.08"
title = "Pluggable terminal header, 14 positions, 5.08 mm, right-angle (MSTBA 2,5)"
params = { pitch = 5.08, positions = 14 }
aliases = ["MSTBA 2,5/14-G-5,08", "MSTBA 2,5/14-G", "14 pin pluggable terminal header 5.08", "14 way pluggable terminal block 5.08mm", "14P pluggable header 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-15-G-5.08"
title = "Pluggable terminal header, 15 positions, 5.08 mm, right-angle (MSTBA 2,5)"
params = { pitch = 5.08, positions = 15 }
aliases = ["MSTBA 2,5/15-G-5,08", "MSTBA 2,5/15-G", "15 pin pluggable terminal header 5.08", "15 way pluggable terminal block 5.08mm", "15P pluggable header 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-16-G-5.08"
title = "Pluggable terminal header, 16 positions, 5.08 mm, right-angle (MSTBA 2,5)"
params = { pitch = 5.08, positions = 16 }
aliases = ["MSTBA 2,5/16-G-5,08", "MSTBA 2,5/16-G", "16 pin pluggable terminal header 5.08", "16 way pluggable terminal block 5.08mm", "16P pluggable header 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MSTBA2.5-2-G-5.08-simple"
title = "Pluggable terminal header, 2 positions, 5.08 mm, simple"
params = { pitch = 5.08, positions = 2, detail = "simple" }
aliases = ["MSTBA 2,5/2-G-5,08 simple"]
standard = "Phoenix Contact"

README.md 17 lines · Markdown

Download

Pluggable terminal block header

A right-angle PCB header for pluggable terminal blocks, of the Phoenix Contact MSTBA 2,5 type, 5.0 or 5.08 mm pitch, 2 to 16 positions. Pin 1 is at the origin, the row runs along +X, and the housing sits on the XY plane with its opening facing -Y. The solder pins go down through the board.

Source

Phoenix Contact data sheet, MSTBA 2,5/ 2-G-5,08 (1757242), a copy at https://static.chipdip.ru/lib/776/DOC031776447.pdf (Phoenix Contact's own site refuses automated downloads):

Dimensions (page 5): length 12, height 8.6 above the board, solder pins 3.5 long.
Dimensional drawing (page 6): width a + 7 (5.0 mm) or a + 7.08 (5.08 mm), and the solder pins 2 from the back face.

The data sheet is for the 2-position, 5.08 mm part. Its drawing gives the same housing for both pitches.

Proportions, for looks only: the pin section, the wall, and the mating pins' reach. The data sheet's side view doesn't dimension the reach, so the pins run to 1.5 mm short of the opening, where the plug's contacts meet them. The plug isn't part of this header. The housing is PA, modelled as pa6, green.

Vertical (MSTBVA) and flanged (GF) headers aren't here yet; see COVERAGE.md.

# Pluggable terminal block header

A right-angle PCB header for pluggable terminal blocks, of the Phoenix Contact MSTBA 2,5 type, 5.0 or 5.08 mm pitch, 2 to 16 positions. Pin 1 is at the origin, the row runs along +X, and the housing sits on the XY plane with its opening facing -Y. The solder pins go down through the board.

## Source

Phoenix Contact data sheet, *MSTBA 2,5/ 2-G-5,08* (1757242), a copy at <https://static.chipdip.ru/lib/776/DOC031776447.pdf> (Phoenix Contact's own site refuses automated downloads):

- Dimensions (page 5): length 12, height 8.6 above the board, solder pins 3.5 long.
- Dimensional drawing (page 6): width a + 7 (5.0 mm) or a + 7.08 (5.08 mm), and the solder pins 2 from the back face.

The data sheet is for the 2-position, 5.08 mm part. Its drawing gives the same housing for both pitches.

**Proportions, for looks only:** the pin section, the wall, and the mating pins' reach. The data sheet's side view doesn't dimension the reach, so the pins run to 1.5 mm short of the opening, where the plug's contacts meet them. The plug isn't part of this header. The housing is PA, modelled as `pa6`, green.

Vertical (MSTBVA) and flanged (GF) headers aren't here yet; see `COVERAGE.md`.

Use this part

STEVE

Open in STEVE

Open it in STEVE The STEVE runtime runs in STEVE: open the part there, or download the code and bundle.

Get the code

curl -o part.py "https://pythonparts.org/p/steve/pluggable-terminal-header/v/1.0.0/raw/part.py"

Raw files, bundle and API

curl "https://pythonparts.org/api/v1/parts/steve/pluggable-terminal-header/1.0.0"

The version's JSON (parameters, presets, files); add /build?name=value for a build at other values.

About this part

steve101 parts

Profile

Polyamide 6 (nylon 6)Plastics · Custom finish · 1.15 g/cm³

Mass: 0.71 g

At the parameters shown in the viewer.

License: MIT

Permissive: use, change and sell it; keep the copyright notice.

Runtime: STEVE
Requirements: None stated in the code
Built with: CadQuery 2.9.0.dev0
Published: Nov 5, 2026
Downloads: 0
Builds: 0
Stars: 0
Bundle: 2903145c321b…

#terminal-block #pluggable #header #phoenix #mstb #connector #electronics

Checks

PassedImports: steve

Every published part passes our checks before it’s listed. It is still code: read it before you use it.

Request a removal A copyright notice, or a trademark, confidential design, safety, malicious code or other problem. Report an illegal or prohibited item

Right-angle PCB header of the MSTBA 2,5 type, with its opening, mating pins and solder pins. Width, length, height and pins from Phoenix Contact's data sheet. See the README.

Pluggable terminal block header

Source

Phoenix Contact data sheet, MSTBA 2,5/ 2-G-5,08 (1757242), a copy at https://static.chipdip.ru/lib/776/DOC031776447.pdf (Phoenix Contact's own site refuses automated downloads):

Dimensions (page 5): length 12, height 8.6 above the board, solder pins 3.5 long.
Dimensional drawing (page 6): width a + 7 (5.0 mm) or a + 7.08 (5.08 mm), and the solder pins 2 from the back face.

The data sheet is for the 2-position, 5.08 mm part. Its drawing gives the same housing for both pitches.

Vertical (MSTBVA) and flanged (GF) headers aren't here yet; see COVERAGE.md.

1.2.0 Latest Nov 5, 2026 · 1 hour ago Compare with 1.1.0

Vertical MSTBVA 2,5 headers at 5.08 mm. Right-angle parts are unchanged.
1.1.0 Nov 5, 2026 · 1 hour ago Compare with 1.0.0

MC 1,5 headers at 3.81 mm. MSTBA 2,5 parts are unchanged.
1.0.0 Nov 5, 2026 · 1 hour ago

More #terminal-block

STEVEMIT

steve/screw-terminal-block

PCB screw terminal block, Phoenix Contact types: MKDS 1,5 (5.0, 5.08 mm), PT 1,5 (3.5 mm), MPT 0,5 (2.54 mm).

0 57 sizes 0 1 hour ago v1.1.0

STEVEMIT

steve/jst-ph-header

JST PH shrouded header, 2.0 mm pitch, top entry: B2B-PH-K to B16B-PH-K.

0 16 sizes 0 1 hour ago v1.0.0

STEVEMIT

steve/pin-header

Through-hole pin header, 2.54 mm and 2.00 mm pitch, one or two rows, 1 to 40 pins per row, straight or right-angle.

0 241 sizes 0 2 hours ago v1.1.0

STEVEMIT

steve/jst-xh-header

JST XH shrouded header, 2.5 mm pitch, top entry: B2B-XH-A to B16B-XH-A and B20B-XH-A.

0 17 sizes 0 1 hour ago v1.0.0

steve/pluggable-terminal-header

Pluggable terminal block header

Source

Pluggable terminal block header

Source

Related parts

steve/screw-terminal-block

steve/jst-ph-header

steve/pin-header

steve/jst-xh-header