steve/screw-terminal-block

PCB screw terminal block, Phoenix Contact types: MKDS 1,5 (5.0, 5.08 mm), PT 1,5 (3.5 mm), MPT 0,5 (2.54 mm).

v1.1.0 Latest STEVE MIT 0

Open in STEVE

Isometric

Parameters

Preset57 sizes

Series

MKDS 1,5PT 1,5MPT 0,5

Pitch

2.543.55.05.08

MKDS 1,5: 5.0 or 5.08. PT 1,5: 3.5. MPT 0,5: 2.54.

Positions2–16

2 to 16; MPT 0,5: 2 to 12.

Detail

fullsimple

full: wire entries, screw openings and solder pins. simple: the housing's outline.

Defaults built

part.py 55 lines · Python · STEVE runtime · checked

Download

"""PCB screw terminal block, Phoenix Contact MKDS 1,5 (5.0 and 5.08 mm), PT 1,5 (3.5 mm) and MPT 0,5 (2.54 mm) types. Pin 1 is at the origin, the row along +X,

the housing on the XY plane, the wire entries facing -Y, the screws on top, the solder pins down through the board. Dimensions from Phoenix Contact's data sheets

in the README."""

from steve import Model

series = "MKDS 1,5" # Series

pitch = 5.08 # mm Pitch

positions = 2 # Positions

detail = "full" # full: wire entries, screw heads and solder pins; simple: the housing's outline

# series: (pitches, positions, height above the board, length, solder pin length, pin across the row, pin along, pin from the wire-entry face,

# width past the end pins in all)

# MKDS 1,5: data sheet MKDS 1,5/ 2-5,08 (1715721), Dimensions p. 4 and dimensional drawing p. 8: width a + pitch, 13.8, 9.8, pins 3.5, 0.9 x 0.9, 4.6.

# PT 1,5: data sheet PT 1,5/ 5-3,5-H (1984646), Drawings p. 4: width a + 3.5, 9.2, 7.6, pins 4.5, 0.9, 3.1 from the back face.

# MPT 0,5: data sheet MPT 0,5/ 2-2,54 (1725656), p. 5 and dimensional drawing p. 6: width 5.54 for 2 positions (1.5 past each end pin), 8.5, 6.2,

# pins 3.5, 0.5 x 0.9, 3.1 from the back face.

SERIES = {

"MKDS 1,5": ((5.0, 5.08), (2, 16), 13.8, 9.8, 3.5, 0.9, 0.9, 4.6, None),

"PT 1,5": ((3.5,), (2, 16), 9.2, 7.6, 4.5, 0.9, 0.9, 4.5, 3.5),

"MPT 0,5": ((2.54,), (2, 12), 8.5, 6.2, 3.5, 0.5, 0.9, 3.1, 3.0),

}

pitches, (low, high), HEIGHT, LENGTH, PIN_LENGTH, PIN_W, PIN_D, PIN_FROM_FRONT, ends = SERIES[series]

if pitch not in pitches or not low <= positions <= high:

raise ValueError(f"{series} comes in pitch {pitches} with {low} to {high} positions.")

width = (positions - 1) * pitch + (ends if ends is not None else pitch)

x0 = -(width - (positions - 1) * pitch) / 2

front = -PIN_FROM_FRONT

# the side profile: the step at the top of the wire-entry face and the sloped back are proportions, for looks

profile = [(front, 0), (front + LENGTH, 0), (front + LENGTH, 0.72 * HEIGHT), (front + 0.75 * LENGTH, HEIGHT), (front + 0.25 * LENGTH, HEIGHT), (front + 0.25 * LENGTH, 0.8 * HEIGHT), (front, 0.8 * HEIGHT)]

model = Model()

model.plane("side_plane", on="YZ", offset=x0, name="Side")

with model.sketch("body_sketch", on="side_plane", name="Housing") as sk:

sk.polyline("body_outline", profile, closed=True)

model.extrude("body", "body_sketch", distance=width, name="Housing")

if detail == "full":

entry, screw = 0.6 * pitch, 0.55 * pitch # the wire entry and screw head sizes are proportions, for looks

model.plane("front_plane", on="XZ", offset=-front, name="Wire entries")

with model.sketch("entries_sketch", on="front_plane", name="Wire entries") as sk:

for i in range(positions):

sk.rect(f"entry_{i}", (i * pitch - entry / 2, 0.25 * HEIGHT), (i * pitch + entry / 2, 0.25 * HEIGHT + entry))

model.extrude("entries", "entries_sketch", distance=-0.55 * LENGTH, op="cut", name="Wire entries")

model.plane("top_plane", on="XY", offset=HEIGHT, name="Top")

with model.sketch("screws_sketch", on="top_plane", name="Screw openings") as sk:

for i in range(positions):

sk.circle(f"screw_{i}", (i * pitch, front + 0.5 * LENGTH), screw / 2)

model.extrude("screws", "screws_sketch", distance=-0.15 * HEIGHT, op="cut", name="Screw openings")

model.plane("pin_plane", on="XY", offset=-PIN_LENGTH, name="Solder pins")

with model.sketch("pins_sketch", on="pin_plane", name="Solder pins") as sk:

for i in range(positions):

sk.rect(f"pin_{i}", (i * pitch - PIN_W / 2, -PIN_D / 2), (i * pitch + PIN_W / 2, PIN_D / 2))

model.extrude("pins", "pins_sketch", distance=PIN_LENGTH + 1, name="Solder pins")

model.material("pa6", color="#2f7d4a")

result = model.result()

"""PCB screw terminal block, Phoenix Contact MKDS 1,5 (5.0 and 5.08 mm), PT 1,5 (3.5 mm) and MPT 0,5 (2.54 mm) types. Pin 1 is at the origin, the row along +X,
the housing on the XY plane, the wire entries facing -Y, the screws on top, the solder pins down through the board. Dimensions from Phoenix Contact's data sheets
in the README."""
from steve import Model

series = "MKDS 1,5"  # Series
pitch = 5.08  # mm Pitch
positions = 2  # Positions
detail = "full"  # full: wire entries, screw heads and solder pins; simple: the housing's outline

# series: (pitches, positions, height above the board, length, solder pin length, pin across the row, pin along, pin from the wire-entry face,
# width past the end pins in all)
# MKDS 1,5: data sheet MKDS 1,5/ 2-5,08 (1715721), Dimensions p. 4 and dimensional drawing p. 8: width a + pitch, 13.8, 9.8, pins 3.5, 0.9 x 0.9, 4.6.
# PT 1,5: data sheet PT 1,5/ 5-3,5-H (1984646), Drawings p. 4: width a + 3.5, 9.2, 7.6, pins 4.5, 0.9, 3.1 from the back face.
# MPT 0,5: data sheet MPT 0,5/ 2-2,54 (1725656), p. 5 and dimensional drawing p. 6: width 5.54 for 2 positions (1.5 past each end pin), 8.5, 6.2,
# pins 3.5, 0.5 x 0.9, 3.1 from the back face.
SERIES = {
    "MKDS 1,5": ((5.0, 5.08), (2, 16), 13.8, 9.8, 3.5, 0.9, 0.9, 4.6, None),
    "PT 1,5": ((3.5,), (2, 16), 9.2, 7.6, 4.5, 0.9, 0.9, 4.5, 3.5),
    "MPT 0,5": ((2.54,), (2, 12), 8.5, 6.2, 3.5, 0.5, 0.9, 3.1, 3.0),
}
pitches, (low, high), HEIGHT, LENGTH, PIN_LENGTH, PIN_W, PIN_D, PIN_FROM_FRONT, ends = SERIES[series]
if pitch not in pitches or not low <= positions <= high:
    raise ValueError(f"{series} comes in pitch {pitches} with {low} to {high} positions.")

width = (positions - 1) * pitch + (ends if ends is not None else pitch)
x0 = -(width - (positions - 1) * pitch) / 2
front = -PIN_FROM_FRONT
# the side profile: the step at the top of the wire-entry face and the sloped back are proportions, for looks
profile = [(front, 0), (front + LENGTH, 0), (front + LENGTH, 0.72 * HEIGHT), (front + 0.75 * LENGTH, HEIGHT), (front + 0.25 * LENGTH, HEIGHT), (front + 0.25 * LENGTH, 0.8 * HEIGHT), (front, 0.8 * HEIGHT)]
model = Model()
model.plane("side_plane", on="YZ", offset=x0, name="Side")
with model.sketch("body_sketch", on="side_plane", name="Housing") as sk:
    sk.polyline("body_outline", profile, closed=True)
model.extrude("body", "body_sketch", distance=width, name="Housing")
if detail == "full":
    entry, screw = 0.6 * pitch, 0.55 * pitch   # the wire entry and screw head sizes are proportions, for looks
    model.plane("front_plane", on="XZ", offset=-front, name="Wire entries")
    with model.sketch("entries_sketch", on="front_plane", name="Wire entries") as sk:
        for i in range(positions):
            sk.rect(f"entry_{i}", (i * pitch - entry / 2, 0.25 * HEIGHT), (i * pitch + entry / 2, 0.25 * HEIGHT + entry))
    model.extrude("entries", "entries_sketch", distance=-0.55 * LENGTH, op="cut", name="Wire entries")
    model.plane("top_plane", on="XY", offset=HEIGHT, name="Top")
    with model.sketch("screws_sketch", on="top_plane", name="Screw openings") as sk:
        for i in range(positions):
            sk.circle(f"screw_{i}", (i * pitch, front + 0.5 * LENGTH), screw / 2)
    model.extrude("screws", "screws_sketch", distance=-0.15 * HEIGHT, op="cut", name="Screw openings")
    model.plane("pin_plane", on="XY", offset=-PIN_LENGTH, name="Solder pins")
    with model.sketch("pins_sketch", on="pin_plane", name="Solder pins") as sk:
        for i in range(positions):
            sk.rect(f"pin_{i}", (i * pitch - PIN_W / 2, -PIN_D / 2), (i * pitch + PIN_W / 2, PIN_D / 2))
    model.extrude("pins", "pins_sketch", distance=PIN_LENGTH + 1, name="Solder pins")
model.material("pa6", color="#2f7d4a")
result = model.result()

pypart.toml 38 lines · TOML

Download

name = "steve/screw-terminal-block"

version = "1.1.0"

runtime = "steve"

license = "MIT"

summary = "PCB screw terminal block, Phoenix Contact types: MKDS 1,5 (5.0, 5.08 mm), PT 1,5 (3.5 mm), MPT 0,5 (2.54 mm)."

changes = "PT 1,5 at 3.5 mm and MPT 0,5 at 2.54 mm. MKDS 1,5 parts are unchanged."

description = """PCB screw terminal block of the MKDS 1,5, PT 1,5 or MPT 0,5 type, with wire entries, screw openings and solder pins. Width, height, length and pins from Phoenix Contact's data sheets. See the README."""

tags = ["terminal-block", "screw-terminal", "phoenix", "mkds", "connector", "electronics"]

[parameters.series]

type = "choice"

default = "MKDS 1,5"

choices = ["MKDS 1,5", "PT 1,5", "MPT 0,5"]

label = "Series"

[parameters.pitch]

type = "choice"

default = 5.08

choices = [2.54, 3.5, 5.0, 5.08]

description = "MKDS 1,5: 5.0 or 5.08. PT 1,5: 3.5. MPT 0,5: 2.54."

unit = "mm"

label = "Pitch"

[parameters.positions]

type = "integer"

default = 2

min = 2

max = 16

label = "Positions"

description = "2 to 16; MPT 0,5: 2 to 12."

[parameters.detail]

type = "choice"

default = "full"

choices = ["full", "simple"]

label = "Detail"

description = "full: wire entries, screw openings and solder pins. simple: the housing's outline."

name = "steve/screw-terminal-block"
version = "1.1.0"
runtime = "steve"
license = "MIT"
summary = "PCB screw terminal block, Phoenix Contact types: MKDS 1,5 (5.0, 5.08 mm), PT 1,5 (3.5 mm), MPT 0,5 (2.54 mm)."
changes = "PT 1,5 at 3.5 mm and MPT 0,5 at 2.54 mm. MKDS 1,5 parts are unchanged."
description = """PCB screw terminal block of the MKDS 1,5, PT 1,5 or MPT 0,5 type, with wire entries, screw openings and solder pins. Width, height, length and pins from Phoenix Contact's data sheets. See the README."""
tags = ["terminal-block", "screw-terminal", "phoenix", "mkds", "connector", "electronics"]

[parameters.series]
type = "choice"
default = "MKDS 1,5"
choices = ["MKDS 1,5", "PT 1,5", "MPT 0,5"]
label = "Series"

[parameters.pitch]
type = "choice"
default = 5.08
choices = [2.54, 3.5, 5.0, 5.08]
description = "MKDS 1,5: 5.0 or 5.08. PT 1,5: 3.5. MPT 0,5: 2.54."
unit = "mm"
label = "Pitch"

[parameters.positions]
type = "integer"
default = 2
min = 2
max = 16
label = "Positions"
description = "2 to 16; MPT 0,5: 2 to 12."

[parameters.detail]
type = "choice"
default = "full"
choices = ["full", "simple"]
label = "Detail"
description = "full: wire entries, screw openings and solder pins. simple: the housing's outline."

presets.toml 401 lines · TOML

Download

# Presets of this part (factory/PRESETS.md). Written by factory/gen.py.

[[presets]]

id = "MKDS1.5-2-5.0"

title = "Screw terminal block, 2 positions, 5.0 mm (MKDS 1,5)"

params = { series = "MKDS 1,5", pitch = 5, positions = 2 }

aliases = ["MKDS-1,5-2-5.0", "MKDS 1,5/2-5,0", "2 pin screw terminal 5.0", "2 way terminal block 5.0mm", "2P screw terminal 5.0", "2 position terminal block 5.0"]

standard = "Phoenix Contact"

[[presets]]

id = "MKDS1.5-3-5.0"

title = "Screw terminal block, 3 positions, 5.0 mm (MKDS 1,5)"

params = { series = "MKDS 1,5", pitch = 5, positions = 3 }

aliases = ["MKDS-1,5-3-5.0", "MKDS 1,5/3-5,0", "3 pin screw terminal 5.0", "3 way terminal block 5.0mm", "3P screw terminal 5.0", "3 position terminal block 5.0"]

standard = "Phoenix Contact"

[[presets]]

id = "MKDS1.5-4-5.0"

title = "Screw terminal block, 4 positions, 5.0 mm (MKDS 1,5)"

params = { series = "MKDS 1,5", pitch = 5, positions = 4 }

aliases = ["MKDS-1,5-4-5.0", "MKDS 1,5/4-5,0", "4 pin screw terminal 5.0", "4 way terminal block 5.0mm", "4P screw terminal 5.0", "4 position terminal block 5.0"]

standard = "Phoenix Contact"

[[presets]]

id = "MKDS1.5-5-5.0"

title = "Screw terminal block, 5 positions, 5.0 mm (MKDS 1,5)"

params = { series = "MKDS 1,5", pitch = 5, positions = 5 }

aliases = ["MKDS-1,5-5-5.0", "MKDS 1,5/5-5,0", "5 pin screw terminal 5.0", "5 way terminal block 5.0mm", "5P screw terminal 5.0", "5 position terminal block 5.0"]

standard = "Phoenix Contact"

[[presets]]

id = "MKDS1.5-6-5.0"

title = "Screw terminal block, 6 positions, 5.0 mm (MKDS 1,5)"

params = { series = "MKDS 1,5", pitch = 5, positions = 6 }

aliases = ["MKDS-1,5-6-5.0", "MKDS 1,5/6-5,0", "6 pin screw terminal 5.0", "6 way terminal block 5.0mm", "6P screw terminal 5.0", "6 position terminal block 5.0"]

standard = "Phoenix Contact"

[[presets]]

id = "MKDS1.5-7-5.0"

title = "Screw terminal block, 7 positions, 5.0 mm (MKDS 1,5)"

params = { series = "MKDS 1,5", pitch = 5, positions = 7 }

aliases = ["MKDS-1,5-7-5.0", "MKDS 1,5/7-5,0", "7 pin screw terminal 5.0", "7 way terminal block 5.0mm", "7P screw terminal 5.0", "7 position terminal block 5.0"]

standard = "Phoenix Contact"

[[presets]]

id = "MKDS1.5-8-5.0"

title = "Screw terminal block, 8 positions, 5.0 mm (MKDS 1,5)"

params = { series = "MKDS 1,5", pitch = 5, positions = 8 }

aliases = ["MKDS-1,5-8-5.0", "MKDS 1,5/8-5,0", "8 pin screw terminal 5.0", "8 way terminal block 5.0mm", "8P screw terminal 5.0", "8 position terminal block 5.0"]

standard = "Phoenix Contact"

[[presets]]

id = "MKDS1.5-9-5.0"

title = "Screw terminal block, 9 positions, 5.0 mm (MKDS 1,5)"

params = { series = "MKDS 1,5", pitch = 5, positions = 9 }

aliases = ["MKDS-1,5-9-5.0", "MKDS 1,5/9-5,0", "9 pin screw terminal 5.0", "9 way terminal block 5.0mm", "9P screw terminal 5.0", "9 position terminal block 5.0"]

standard = "Phoenix Contact"

[[presets]]

id = "MKDS1.5-10-5.0"

title = "Screw terminal block, 10 positions, 5.0 mm (MKDS 1,5)"

params = { series = "MKDS 1,5", pitch = 5, positions = 10 }

aliases = ["MKDS-1,5-10-5.0", "MKDS 1,5/10-5,0", "10 pin screw terminal 5.0", "10 way terminal block 5.0mm", "10P screw terminal 5.0", "10 position terminal block 5.0"]

standard = "Phoenix Contact"

[[presets]]

id = "MKDS1.5-11-5.0"

title = "Screw terminal block, 11 positions, 5.0 mm (MKDS 1,5)"

params = { series = "MKDS 1,5", pitch = 5, positions = 11 }

aliases = ["MKDS-1,5-11-5.0", "MKDS 1,5/11-5,0", "11 pin screw terminal 5.0", "11 way terminal block 5.0mm", "11P screw terminal 5.0", "11 position terminal block 5.0"]

standard = "Phoenix Contact"

[[presets]]

id = "MKDS1.5-12-5.0"

title = "Screw terminal block, 12 positions, 5.0 mm (MKDS 1,5)"

params = { series = "MKDS 1,5", pitch = 5, positions = 12 }

aliases = ["MKDS-1,5-12-5.0", "MKDS 1,5/12-5,0", "12 pin screw terminal 5.0", "12 way terminal block 5.0mm", "12P screw terminal 5.0", "12 position terminal block 5.0"]

standard = "Phoenix Contact"

[[presets]]

id = "MKDS1.5-13-5.0"

title = "Screw terminal block, 13 positions, 5.0 mm (MKDS 1,5)"

params = { series = "MKDS 1,5", pitch = 5, positions = 13 }

aliases = ["MKDS-1,5-13-5.0", "MKDS 1,5/13-5,0", "13 pin screw terminal 5.0", "13 way terminal block 5.0mm", "13P screw terminal 5.0", "13 position terminal block 5.0"]

standard = "Phoenix Contact"

[[presets]]

id = "MKDS1.5-14-5.0"

title = "Screw terminal block, 14 positions, 5.0 mm (MKDS 1,5)"

params = { series = "MKDS 1,5", pitch = 5, positions = 14 }

aliases = ["MKDS-1,5-14-5.0", "MKDS 1,5/14-5,0", "14 pin screw terminal 5.0", "14 way terminal block 5.0mm", "14P screw terminal 5.0", "14 position terminal block 5.0"]

standard = "Phoenix Contact"

[[presets]]

id = "MKDS1.5-15-5.0"

title = "Screw terminal block, 15 positions, 5.0 mm (MKDS 1,5)"

params = { series = "MKDS 1,5", pitch = 5, positions = 15 }

aliases = ["MKDS-1,5-15-5.0", "MKDS 1,5/15-5,0", "15 pin screw terminal 5.0", "15 way terminal block 5.0mm", "15P screw terminal 5.0", "15 position terminal block 5.0"]

standard = "Phoenix Contact"

100

101

[[presets]]

102

id = "MKDS1.5-16-5.0"

103

title = "Screw terminal block, 16 positions, 5.0 mm (MKDS 1,5)"

104

params = { series = "MKDS 1,5", pitch = 5, positions = 16 }

105

aliases = ["MKDS-1,5-16-5.0", "MKDS 1,5/16-5,0", "16 pin screw terminal 5.0", "16 way terminal block 5.0mm", "16P screw terminal 5.0", "16 position terminal block 5.0"]

106

standard = "Phoenix Contact"

107

108

[[presets]]

109

id = "MKDS1.5-2-5.08"

110

title = "Screw terminal block, 2 positions, 5.08 mm (MKDS 1,5)"

111

params = { series = "MKDS 1,5", pitch = 5.08, positions = 2 }

112

aliases = ["MKDS-1,5-2-5.08", "MKDS 1,5/2-5,08", "2 pin screw terminal 5.08", "2 way terminal block 5.08mm", "2P screw terminal 5.08", "2 position terminal block 5.08"]

113

standard = "Phoenix Contact"

114

115

[[presets]]

116

id = "MKDS1.5-3-5.08"

117

title = "Screw terminal block, 3 positions, 5.08 mm (MKDS 1,5)"

118

params = { series = "MKDS 1,5", pitch = 5.08, positions = 3 }

119

aliases = ["MKDS-1,5-3-5.08", "MKDS 1,5/3-5,08", "3 pin screw terminal 5.08", "3 way terminal block 5.08mm", "3P screw terminal 5.08", "3 position terminal block 5.08"]

120

standard = "Phoenix Contact"

121

122

[[presets]]

123

id = "MKDS1.5-4-5.08"

124

title = "Screw terminal block, 4 positions, 5.08 mm (MKDS 1,5)"

125

params = { series = "MKDS 1,5", pitch = 5.08, positions = 4 }

126

aliases = ["MKDS-1,5-4-5.08", "MKDS 1,5/4-5,08", "4 pin screw terminal 5.08", "4 way terminal block 5.08mm", "4P screw terminal 5.08", "4 position terminal block 5.08"]

127

standard = "Phoenix Contact"

128

129

[[presets]]

130

id = "MKDS1.5-5-5.08"

131

title = "Screw terminal block, 5 positions, 5.08 mm (MKDS 1,5)"

132

params = { series = "MKDS 1,5", pitch = 5.08, positions = 5 }

133

aliases = ["MKDS-1,5-5-5.08", "MKDS 1,5/5-5,08", "5 pin screw terminal 5.08", "5 way terminal block 5.08mm", "5P screw terminal 5.08", "5 position terminal block 5.08"]

134

standard = "Phoenix Contact"

135

136

[[presets]]

137

id = "MKDS1.5-6-5.08"

138

title = "Screw terminal block, 6 positions, 5.08 mm (MKDS 1,5)"

139

params = { series = "MKDS 1,5", pitch = 5.08, positions = 6 }

140

aliases = ["MKDS-1,5-6-5.08", "MKDS 1,5/6-5,08", "6 pin screw terminal 5.08", "6 way terminal block 5.08mm", "6P screw terminal 5.08", "6 position terminal block 5.08"]

141

standard = "Phoenix Contact"

142

143

[[presets]]

144

id = "MKDS1.5-7-5.08"

145

title = "Screw terminal block, 7 positions, 5.08 mm (MKDS 1,5)"

146

params = { series = "MKDS 1,5", pitch = 5.08, positions = 7 }

147

aliases = ["MKDS-1,5-7-5.08", "MKDS 1,5/7-5,08", "7 pin screw terminal 5.08", "7 way terminal block 5.08mm", "7P screw terminal 5.08", "7 position terminal block 5.08"]

148

standard = "Phoenix Contact"

149

150

[[presets]]

151

id = "MKDS1.5-8-5.08"

152

title = "Screw terminal block, 8 positions, 5.08 mm (MKDS 1,5)"

153

params = { series = "MKDS 1,5", pitch = 5.08, positions = 8 }

154

aliases = ["MKDS-1,5-8-5.08", "MKDS 1,5/8-5,08", "8 pin screw terminal 5.08", "8 way terminal block 5.08mm", "8P screw terminal 5.08", "8 position terminal block 5.08"]

155

standard = "Phoenix Contact"

156

157

[[presets]]

158

id = "MKDS1.5-9-5.08"

159

title = "Screw terminal block, 9 positions, 5.08 mm (MKDS 1,5)"

160

params = { series = "MKDS 1,5", pitch = 5.08, positions = 9 }

161

aliases = ["MKDS-1,5-9-5.08", "MKDS 1,5/9-5,08", "9 pin screw terminal 5.08", "9 way terminal block 5.08mm", "9P screw terminal 5.08", "9 position terminal block 5.08"]

162

standard = "Phoenix Contact"

163

164

[[presets]]

165

id = "MKDS1.5-10-5.08"

166

title = "Screw terminal block, 10 positions, 5.08 mm (MKDS 1,5)"

167

params = { series = "MKDS 1,5", pitch = 5.08, positions = 10 }

168

aliases = ["MKDS-1,5-10-5.08", "MKDS 1,5/10-5,08", "10 pin screw terminal 5.08", "10 way terminal block 5.08mm", "10P screw terminal 5.08", "10 position terminal block 5.08"]

169

standard = "Phoenix Contact"

170

171

[[presets]]

172

id = "MKDS1.5-11-5.08"

173

title = "Screw terminal block, 11 positions, 5.08 mm (MKDS 1,5)"

174

params = { series = "MKDS 1,5", pitch = 5.08, positions = 11 }

175

aliases = ["MKDS-1,5-11-5.08", "MKDS 1,5/11-5,08", "11 pin screw terminal 5.08", "11 way terminal block 5.08mm", "11P screw terminal 5.08", "11 position terminal block 5.08"]

176

standard = "Phoenix Contact"

177

178

[[presets]]

179

id = "MKDS1.5-12-5.08"

180

title = "Screw terminal block, 12 positions, 5.08 mm (MKDS 1,5)"

181

params = { series = "MKDS 1,5", pitch = 5.08, positions = 12 }

182

aliases = ["MKDS-1,5-12-5.08", "MKDS 1,5/12-5,08", "12 pin screw terminal 5.08", "12 way terminal block 5.08mm", "12P screw terminal 5.08", "12 position terminal block 5.08"]

183

standard = "Phoenix Contact"

184

185

[[presets]]

186

id = "MKDS1.5-13-5.08"

187

title = "Screw terminal block, 13 positions, 5.08 mm (MKDS 1,5)"

188

params = { series = "MKDS 1,5", pitch = 5.08, positions = 13 }

189

aliases = ["MKDS-1,5-13-5.08", "MKDS 1,5/13-5,08", "13 pin screw terminal 5.08", "13 way terminal block 5.08mm", "13P screw terminal 5.08", "13 position terminal block 5.08"]

190

standard = "Phoenix Contact"

191

192

[[presets]]

193

id = "MKDS1.5-14-5.08"

194

title = "Screw terminal block, 14 positions, 5.08 mm (MKDS 1,5)"

195

params = { series = "MKDS 1,5", pitch = 5.08, positions = 14 }

196

aliases = ["MKDS-1,5-14-5.08", "MKDS 1,5/14-5,08", "14 pin screw terminal 5.08", "14 way terminal block 5.08mm", "14P screw terminal 5.08", "14 position terminal block 5.08"]

197

standard = "Phoenix Contact"

198

199

[[presets]]

200

id = "MKDS1.5-15-5.08"

201

title = "Screw terminal block, 15 positions, 5.08 mm (MKDS 1,5)"

202

params = { series = "MKDS 1,5", pitch = 5.08, positions = 15 }

203

aliases = ["MKDS-1,5-15-5.08", "MKDS 1,5/15-5,08", "15 pin screw terminal 5.08", "15 way terminal block 5.08mm", "15P screw terminal 5.08", "15 position terminal block 5.08"]

204

standard = "Phoenix Contact"

205

206

[[presets]]

207

id = "MKDS1.5-16-5.08"

208

title = "Screw terminal block, 16 positions, 5.08 mm (MKDS 1,5)"

209

params = { series = "MKDS 1,5", pitch = 5.08, positions = 16 }

210

aliases = ["MKDS-1,5-16-5.08", "MKDS 1,5/16-5,08", "16 pin screw terminal 5.08", "16 way terminal block 5.08mm", "16P screw terminal 5.08", "16 position terminal block 5.08"]

211

standard = "Phoenix Contact"

212

213

[[presets]]

214

id = "MPT0.5-2-2.54"

215

title = "Screw terminal block, 2 positions, 2.54 mm (MPT 0,5)"

216

params = { series = "MPT 0,5", pitch = 2.54, positions = 2 }

217

aliases = ["MPT-0,5-2-2.54", "MPT 0,5/2-2,54", "2 pin screw terminal 2.54", "2 way terminal block 2.54mm", "2P screw terminal 2.54", "2 position terminal block 2.54"]

218

standard = "Phoenix Contact"

219

220

[[presets]]

221

id = "MPT0.5-3-2.54"

222

title = "Screw terminal block, 3 positions, 2.54 mm (MPT 0,5)"

223

params = { series = "MPT 0,5", pitch = 2.54, positions = 3 }

224

aliases = ["MPT-0,5-3-2.54", "MPT 0,5/3-2,54", "3 pin screw terminal 2.54", "3 way terminal block 2.54mm", "3P screw terminal 2.54", "3 position terminal block 2.54"]

225

standard = "Phoenix Contact"

226

227

[[presets]]

228

id = "MPT0.5-4-2.54"

229

title = "Screw terminal block, 4 positions, 2.54 mm (MPT 0,5)"

230

params = { series = "MPT 0,5", pitch = 2.54, positions = 4 }

231

aliases = ["MPT-0,5-4-2.54", "MPT 0,5/4-2,54", "4 pin screw terminal 2.54", "4 way terminal block 2.54mm", "4P screw terminal 2.54", "4 position terminal block 2.54"]

232

standard = "Phoenix Contact"

233

234

[[presets]]

235

id = "MPT0.5-5-2.54"

236

title = "Screw terminal block, 5 positions, 2.54 mm (MPT 0,5)"

237

params = { series = "MPT 0,5", pitch = 2.54, positions = 5 }

238

aliases = ["MPT-0,5-5-2.54", "MPT 0,5/5-2,54", "5 pin screw terminal 2.54", "5 way terminal block 2.54mm", "5P screw terminal 2.54", "5 position terminal block 2.54"]

239

standard = "Phoenix Contact"

240

241

[[presets]]

242

id = "MPT0.5-6-2.54"

243

title = "Screw terminal block, 6 positions, 2.54 mm (MPT 0,5)"

244

params = { series = "MPT 0,5", pitch = 2.54, positions = 6 }

245

aliases = ["MPT-0,5-6-2.54", "MPT 0,5/6-2,54", "6 pin screw terminal 2.54", "6 way terminal block 2.54mm", "6P screw terminal 2.54", "6 position terminal block 2.54"]

246

standard = "Phoenix Contact"

247

248

[[presets]]

249

id = "MPT0.5-7-2.54"

250

title = "Screw terminal block, 7 positions, 2.54 mm (MPT 0,5)"

251

params = { series = "MPT 0,5", pitch = 2.54, positions = 7 }

252

aliases = ["MPT-0,5-7-2.54", "MPT 0,5/7-2,54", "7 pin screw terminal 2.54", "7 way terminal block 2.54mm", "7P screw terminal 2.54", "7 position terminal block 2.54"]

253

standard = "Phoenix Contact"

254

255

[[presets]]

256

id = "MPT0.5-8-2.54"

257

title = "Screw terminal block, 8 positions, 2.54 mm (MPT 0,5)"

258

params = { series = "MPT 0,5", pitch = 2.54, positions = 8 }

259

aliases = ["MPT-0,5-8-2.54", "MPT 0,5/8-2,54", "8 pin screw terminal 2.54", "8 way terminal block 2.54mm", "8P screw terminal 2.54", "8 position terminal block 2.54"]

260

standard = "Phoenix Contact"

261

262

[[presets]]

263

id = "MPT0.5-9-2.54"

264

title = "Screw terminal block, 9 positions, 2.54 mm (MPT 0,5)"

265

params = { series = "MPT 0,5", pitch = 2.54, positions = 9 }

266

aliases = ["MPT-0,5-9-2.54", "MPT 0,5/9-2,54", "9 pin screw terminal 2.54", "9 way terminal block 2.54mm", "9P screw terminal 2.54", "9 position terminal block 2.54"]

267

standard = "Phoenix Contact"

268

269

[[presets]]

270

id = "MPT0.5-10-2.54"

271

title = "Screw terminal block, 10 positions, 2.54 mm (MPT 0,5)"

272

params = { series = "MPT 0,5", pitch = 2.54, positions = 10 }

273

aliases = ["MPT-0,5-10-2.54", "MPT 0,5/10-2,54", "10 pin screw terminal 2.54", "10 way terminal block 2.54mm", "10P screw terminal 2.54", "10 position terminal block 2.54"]

274

standard = "Phoenix Contact"

275

276

[[presets]]

277

id = "MPT0.5-11-2.54"

278

title = "Screw terminal block, 11 positions, 2.54 mm (MPT 0,5)"

279

params = { series = "MPT 0,5", pitch = 2.54, positions = 11 }

280

aliases = ["MPT-0,5-11-2.54", "MPT 0,5/11-2,54", "11 pin screw terminal 2.54", "11 way terminal block 2.54mm", "11P screw terminal 2.54", "11 position terminal block 2.54"]

281

standard = "Phoenix Contact"

282

283

[[presets]]

284

id = "MPT0.5-12-2.54"

285

title = "Screw terminal block, 12 positions, 2.54 mm (MPT 0,5)"

286

params = { series = "MPT 0,5", pitch = 2.54, positions = 12 }

287

aliases = ["MPT-0,5-12-2.54", "MPT 0,5/12-2,54", "12 pin screw terminal 2.54", "12 way terminal block 2.54mm", "12P screw terminal 2.54", "12 position terminal block 2.54"]

288

standard = "Phoenix Contact"

289

290

[[presets]]

291

id = "PT1.5-2-3.5"

292

title = "Screw terminal block, 2 positions, 3.5 mm (PT 1,5)"

293

params = { series = "PT 1,5", pitch = 3.5, positions = 2 }

294

aliases = ["PT-1,5-2-3.5", "PT 1,5/2-3,5", "2 pin screw terminal 3.5", "2 way terminal block 3.5mm", "2P screw terminal 3.5", "2 position terminal block 3.5"]

295

standard = "Phoenix Contact"

296

297

[[presets]]

298

id = "PT1.5-3-3.5"

299

title = "Screw terminal block, 3 positions, 3.5 mm (PT 1,5)"

300

params = { series = "PT 1,5", pitch = 3.5, positions = 3 }

301

aliases = ["PT-1,5-3-3.5", "PT 1,5/3-3,5", "3 pin screw terminal 3.5", "3 way terminal block 3.5mm", "3P screw terminal 3.5", "3 position terminal block 3.5"]

302

standard = "Phoenix Contact"

303

304

[[presets]]

305

id = "PT1.5-4-3.5"

306

title = "Screw terminal block, 4 positions, 3.5 mm (PT 1,5)"

307

params = { series = "PT 1,5", pitch = 3.5, positions = 4 }

308

aliases = ["PT-1,5-4-3.5", "PT 1,5/4-3,5", "4 pin screw terminal 3.5", "4 way terminal block 3.5mm", "4P screw terminal 3.5", "4 position terminal block 3.5"]

309

standard = "Phoenix Contact"

310

311

[[presets]]

312

id = "PT1.5-5-3.5"

313

title = "Screw terminal block, 5 positions, 3.5 mm (PT 1,5)"

314

params = { series = "PT 1,5", pitch = 3.5, positions = 5 }

315

aliases = ["PT-1,5-5-3.5", "PT 1,5/5-3,5", "5 pin screw terminal 3.5", "5 way terminal block 3.5mm", "5P screw terminal 3.5", "5 position terminal block 3.5"]

316

standard = "Phoenix Contact"

317

318

[[presets]]

319

id = "PT1.5-6-3.5"

320

title = "Screw terminal block, 6 positions, 3.5 mm (PT 1,5)"

321

params = { series = "PT 1,5", pitch = 3.5, positions = 6 }

322

aliases = ["PT-1,5-6-3.5", "PT 1,5/6-3,5", "6 pin screw terminal 3.5", "6 way terminal block 3.5mm", "6P screw terminal 3.5", "6 position terminal block 3.5"]

323

standard = "Phoenix Contact"

324

325

[[presets]]

326

id = "PT1.5-7-3.5"

327

title = "Screw terminal block, 7 positions, 3.5 mm (PT 1,5)"

328

params = { series = "PT 1,5", pitch = 3.5, positions = 7 }

329

aliases = ["PT-1,5-7-3.5", "PT 1,5/7-3,5", "7 pin screw terminal 3.5", "7 way terminal block 3.5mm", "7P screw terminal 3.5", "7 position terminal block 3.5"]

330

standard = "Phoenix Contact"

331

332

[[presets]]

333

id = "PT1.5-8-3.5"

334

title = "Screw terminal block, 8 positions, 3.5 mm (PT 1,5)"

335

params = { series = "PT 1,5", pitch = 3.5, positions = 8 }

336

aliases = ["PT-1,5-8-3.5", "PT 1,5/8-3,5", "8 pin screw terminal 3.5", "8 way terminal block 3.5mm", "8P screw terminal 3.5", "8 position terminal block 3.5"]

337

standard = "Phoenix Contact"

338

339

[[presets]]

340

id = "PT1.5-9-3.5"

341

title = "Screw terminal block, 9 positions, 3.5 mm (PT 1,5)"

342

params = { series = "PT 1,5", pitch = 3.5, positions = 9 }

343

aliases = ["PT-1,5-9-3.5", "PT 1,5/9-3,5", "9 pin screw terminal 3.5", "9 way terminal block 3.5mm", "9P screw terminal 3.5", "9 position terminal block 3.5"]

344

standard = "Phoenix Contact"

345

346

[[presets]]

347

id = "PT1.5-10-3.5"

348

title = "Screw terminal block, 10 positions, 3.5 mm (PT 1,5)"

349

params = { series = "PT 1,5", pitch = 3.5, positions = 10 }

350

aliases = ["PT-1,5-10-3.5", "PT 1,5/10-3,5", "10 pin screw terminal 3.5", "10 way terminal block 3.5mm", "10P screw terminal 3.5", "10 position terminal block 3.5"]

351

standard = "Phoenix Contact"

352

353

[[presets]]

354

id = "PT1.5-11-3.5"

355

title = "Screw terminal block, 11 positions, 3.5 mm (PT 1,5)"

356

params = { series = "PT 1,5", pitch = 3.5, positions = 11 }

357

aliases = ["PT-1,5-11-3.5", "PT 1,5/11-3,5", "11 pin screw terminal 3.5", "11 way terminal block 3.5mm", "11P screw terminal 3.5", "11 position terminal block 3.5"]

358

standard = "Phoenix Contact"

359

360

[[presets]]

361

id = "PT1.5-12-3.5"

362

title = "Screw terminal block, 12 positions, 3.5 mm (PT 1,5)"

363

params = { series = "PT 1,5", pitch = 3.5, positions = 12 }

364

aliases = ["PT-1,5-12-3.5", "PT 1,5/12-3,5", "12 pin screw terminal 3.5", "12 way terminal block 3.5mm", "12P screw terminal 3.5", "12 position terminal block 3.5"]

365

standard = "Phoenix Contact"

366

367

[[presets]]

368

id = "PT1.5-13-3.5"

369

title = "Screw terminal block, 13 positions, 3.5 mm (PT 1,5)"

370

params = { series = "PT 1,5", pitch = 3.5, positions = 13 }

371

aliases = ["PT-1,5-13-3.5", "PT 1,5/13-3,5", "13 pin screw terminal 3.5", "13 way terminal block 3.5mm", "13P screw terminal 3.5", "13 position terminal block 3.5"]

372

standard = "Phoenix Contact"

373

374

[[presets]]

375

id = "PT1.5-14-3.5"

376

title = "Screw terminal block, 14 positions, 3.5 mm (PT 1,5)"

377

params = { series = "PT 1,5", pitch = 3.5, positions = 14 }

378

aliases = ["PT-1,5-14-3.5", "PT 1,5/14-3,5", "14 pin screw terminal 3.5", "14 way terminal block 3.5mm", "14P screw terminal 3.5", "14 position terminal block 3.5"]

379

standard = "Phoenix Contact"

380

381

[[presets]]

382

id = "PT1.5-15-3.5"

383

title = "Screw terminal block, 15 positions, 3.5 mm (PT 1,5)"

384

params = { series = "PT 1,5", pitch = 3.5, positions = 15 }

385

aliases = ["PT-1,5-15-3.5", "PT 1,5/15-3,5", "15 pin screw terminal 3.5", "15 way terminal block 3.5mm", "15P screw terminal 3.5", "15 position terminal block 3.5"]

386

standard = "Phoenix Contact"

387

388

[[presets]]

389

id = "PT1.5-16-3.5"

390

title = "Screw terminal block, 16 positions, 3.5 mm (PT 1,5)"

391

params = { series = "PT 1,5", pitch = 3.5, positions = 16 }

392

aliases = ["PT-1,5-16-3.5", "PT 1,5/16-3,5", "16 pin screw terminal 3.5", "16 way terminal block 3.5mm", "16P screw terminal 3.5", "16 position terminal block 3.5"]

393

standard = "Phoenix Contact"

394

395

[[presets]]

396

id = "MKDS1.5-2-5.08-simple"

397

title = "Screw terminal block, 2 positions, 5.08 mm, simple"

398

params = { series = "MKDS 1,5", pitch = 5.08, positions = 2, detail = "simple" }

399

aliases = ["MKDS 1,5/2-5,08 simple"]

400

standard = "Phoenix Contact"

401

# Presets of this part (factory/PRESETS.md). Written by factory/gen.py.

[[presets]]
id = "MKDS1.5-2-5.0"
title = "Screw terminal block, 2 positions, 5.0 mm (MKDS 1,5)"
params = { series = "MKDS 1,5", pitch = 5, positions = 2 }
aliases = ["MKDS-1,5-2-5.0", "MKDS 1,5/2-5,0", "2 pin screw terminal 5.0", "2 way terminal block 5.0mm", "2P screw terminal 5.0", "2 position terminal block 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-3-5.0"
title = "Screw terminal block, 3 positions, 5.0 mm (MKDS 1,5)"
params = { series = "MKDS 1,5", pitch = 5, positions = 3 }
aliases = ["MKDS-1,5-3-5.0", "MKDS 1,5/3-5,0", "3 pin screw terminal 5.0", "3 way terminal block 5.0mm", "3P screw terminal 5.0", "3 position terminal block 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-4-5.0"
title = "Screw terminal block, 4 positions, 5.0 mm (MKDS 1,5)"
params = { series = "MKDS 1,5", pitch = 5, positions = 4 }
aliases = ["MKDS-1,5-4-5.0", "MKDS 1,5/4-5,0", "4 pin screw terminal 5.0", "4 way terminal block 5.0mm", "4P screw terminal 5.0", "4 position terminal block 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-5-5.0"
title = "Screw terminal block, 5 positions, 5.0 mm (MKDS 1,5)"
params = { series = "MKDS 1,5", pitch = 5, positions = 5 }
aliases = ["MKDS-1,5-5-5.0", "MKDS 1,5/5-5,0", "5 pin screw terminal 5.0", "5 way terminal block 5.0mm", "5P screw terminal 5.0", "5 position terminal block 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-6-5.0"
title = "Screw terminal block, 6 positions, 5.0 mm (MKDS 1,5)"
params = { series = "MKDS 1,5", pitch = 5, positions = 6 }
aliases = ["MKDS-1,5-6-5.0", "MKDS 1,5/6-5,0", "6 pin screw terminal 5.0", "6 way terminal block 5.0mm", "6P screw terminal 5.0", "6 position terminal block 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-7-5.0"
title = "Screw terminal block, 7 positions, 5.0 mm (MKDS 1,5)"
params = { series = "MKDS 1,5", pitch = 5, positions = 7 }
aliases = ["MKDS-1,5-7-5.0", "MKDS 1,5/7-5,0", "7 pin screw terminal 5.0", "7 way terminal block 5.0mm", "7P screw terminal 5.0", "7 position terminal block 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-8-5.0"
title = "Screw terminal block, 8 positions, 5.0 mm (MKDS 1,5)"
params = { series = "MKDS 1,5", pitch = 5, positions = 8 }
aliases = ["MKDS-1,5-8-5.0", "MKDS 1,5/8-5,0", "8 pin screw terminal 5.0", "8 way terminal block 5.0mm", "8P screw terminal 5.0", "8 position terminal block 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-9-5.0"
title = "Screw terminal block, 9 positions, 5.0 mm (MKDS 1,5)"
params = { series = "MKDS 1,5", pitch = 5, positions = 9 }
aliases = ["MKDS-1,5-9-5.0", "MKDS 1,5/9-5,0", "9 pin screw terminal 5.0", "9 way terminal block 5.0mm", "9P screw terminal 5.0", "9 position terminal block 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-10-5.0"
title = "Screw terminal block, 10 positions, 5.0 mm (MKDS 1,5)"
params = { series = "MKDS 1,5", pitch = 5, positions = 10 }
aliases = ["MKDS-1,5-10-5.0", "MKDS 1,5/10-5,0", "10 pin screw terminal 5.0", "10 way terminal block 5.0mm", "10P screw terminal 5.0", "10 position terminal block 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-11-5.0"
title = "Screw terminal block, 11 positions, 5.0 mm (MKDS 1,5)"
params = { series = "MKDS 1,5", pitch = 5, positions = 11 }
aliases = ["MKDS-1,5-11-5.0", "MKDS 1,5/11-5,0", "11 pin screw terminal 5.0", "11 way terminal block 5.0mm", "11P screw terminal 5.0", "11 position terminal block 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-12-5.0"
title = "Screw terminal block, 12 positions, 5.0 mm (MKDS 1,5)"
params = { series = "MKDS 1,5", pitch = 5, positions = 12 }
aliases = ["MKDS-1,5-12-5.0", "MKDS 1,5/12-5,0", "12 pin screw terminal 5.0", "12 way terminal block 5.0mm", "12P screw terminal 5.0", "12 position terminal block 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-13-5.0"
title = "Screw terminal block, 13 positions, 5.0 mm (MKDS 1,5)"
params = { series = "MKDS 1,5", pitch = 5, positions = 13 }
aliases = ["MKDS-1,5-13-5.0", "MKDS 1,5/13-5,0", "13 pin screw terminal 5.0", "13 way terminal block 5.0mm", "13P screw terminal 5.0", "13 position terminal block 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-14-5.0"
title = "Screw terminal block, 14 positions, 5.0 mm (MKDS 1,5)"
params = { series = "MKDS 1,5", pitch = 5, positions = 14 }
aliases = ["MKDS-1,5-14-5.0", "MKDS 1,5/14-5,0", "14 pin screw terminal 5.0", "14 way terminal block 5.0mm", "14P screw terminal 5.0", "14 position terminal block 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-15-5.0"
title = "Screw terminal block, 15 positions, 5.0 mm (MKDS 1,5)"
params = { series = "MKDS 1,5", pitch = 5, positions = 15 }
aliases = ["MKDS-1,5-15-5.0", "MKDS 1,5/15-5,0", "15 pin screw terminal 5.0", "15 way terminal block 5.0mm", "15P screw terminal 5.0", "15 position terminal block 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-16-5.0"
title = "Screw terminal block, 16 positions, 5.0 mm (MKDS 1,5)"
params = { series = "MKDS 1,5", pitch = 5, positions = 16 }
aliases = ["MKDS-1,5-16-5.0", "MKDS 1,5/16-5,0", "16 pin screw terminal 5.0", "16 way terminal block 5.0mm", "16P screw terminal 5.0", "16 position terminal block 5.0"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-2-5.08"
title = "Screw terminal block, 2 positions, 5.08 mm (MKDS 1,5)"
params = { series = "MKDS 1,5", pitch = 5.08, positions = 2 }
aliases = ["MKDS-1,5-2-5.08", "MKDS 1,5/2-5,08", "2 pin screw terminal 5.08", "2 way terminal block 5.08mm", "2P screw terminal 5.08", "2 position terminal block 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-3-5.08"
title = "Screw terminal block, 3 positions, 5.08 mm (MKDS 1,5)"
params = { series = "MKDS 1,5", pitch = 5.08, positions = 3 }
aliases = ["MKDS-1,5-3-5.08", "MKDS 1,5/3-5,08", "3 pin screw terminal 5.08", "3 way terminal block 5.08mm", "3P screw terminal 5.08", "3 position terminal block 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-4-5.08"
title = "Screw terminal block, 4 positions, 5.08 mm (MKDS 1,5)"
params = { series = "MKDS 1,5", pitch = 5.08, positions = 4 }
aliases = ["MKDS-1,5-4-5.08", "MKDS 1,5/4-5,08", "4 pin screw terminal 5.08", "4 way terminal block 5.08mm", "4P screw terminal 5.08", "4 position terminal block 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-5-5.08"
title = "Screw terminal block, 5 positions, 5.08 mm (MKDS 1,5)"
params = { series = "MKDS 1,5", pitch = 5.08, positions = 5 }
aliases = ["MKDS-1,5-5-5.08", "MKDS 1,5/5-5,08", "5 pin screw terminal 5.08", "5 way terminal block 5.08mm", "5P screw terminal 5.08", "5 position terminal block 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-6-5.08"
title = "Screw terminal block, 6 positions, 5.08 mm (MKDS 1,5)"
params = { series = "MKDS 1,5", pitch = 5.08, positions = 6 }
aliases = ["MKDS-1,5-6-5.08", "MKDS 1,5/6-5,08", "6 pin screw terminal 5.08", "6 way terminal block 5.08mm", "6P screw terminal 5.08", "6 position terminal block 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-7-5.08"
title = "Screw terminal block, 7 positions, 5.08 mm (MKDS 1,5)"
params = { series = "MKDS 1,5", pitch = 5.08, positions = 7 }
aliases = ["MKDS-1,5-7-5.08", "MKDS 1,5/7-5,08", "7 pin screw terminal 5.08", "7 way terminal block 5.08mm", "7P screw terminal 5.08", "7 position terminal block 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-8-5.08"
title = "Screw terminal block, 8 positions, 5.08 mm (MKDS 1,5)"
params = { series = "MKDS 1,5", pitch = 5.08, positions = 8 }
aliases = ["MKDS-1,5-8-5.08", "MKDS 1,5/8-5,08", "8 pin screw terminal 5.08", "8 way terminal block 5.08mm", "8P screw terminal 5.08", "8 position terminal block 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-9-5.08"
title = "Screw terminal block, 9 positions, 5.08 mm (MKDS 1,5)"
params = { series = "MKDS 1,5", pitch = 5.08, positions = 9 }
aliases = ["MKDS-1,5-9-5.08", "MKDS 1,5/9-5,08", "9 pin screw terminal 5.08", "9 way terminal block 5.08mm", "9P screw terminal 5.08", "9 position terminal block 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-10-5.08"
title = "Screw terminal block, 10 positions, 5.08 mm (MKDS 1,5)"
params = { series = "MKDS 1,5", pitch = 5.08, positions = 10 }
aliases = ["MKDS-1,5-10-5.08", "MKDS 1,5/10-5,08", "10 pin screw terminal 5.08", "10 way terminal block 5.08mm", "10P screw terminal 5.08", "10 position terminal block 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-11-5.08"
title = "Screw terminal block, 11 positions, 5.08 mm (MKDS 1,5)"
params = { series = "MKDS 1,5", pitch = 5.08, positions = 11 }
aliases = ["MKDS-1,5-11-5.08", "MKDS 1,5/11-5,08", "11 pin screw terminal 5.08", "11 way terminal block 5.08mm", "11P screw terminal 5.08", "11 position terminal block 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-12-5.08"
title = "Screw terminal block, 12 positions, 5.08 mm (MKDS 1,5)"
params = { series = "MKDS 1,5", pitch = 5.08, positions = 12 }
aliases = ["MKDS-1,5-12-5.08", "MKDS 1,5/12-5,08", "12 pin screw terminal 5.08", "12 way terminal block 5.08mm", "12P screw terminal 5.08", "12 position terminal block 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-13-5.08"
title = "Screw terminal block, 13 positions, 5.08 mm (MKDS 1,5)"
params = { series = "MKDS 1,5", pitch = 5.08, positions = 13 }
aliases = ["MKDS-1,5-13-5.08", "MKDS 1,5/13-5,08", "13 pin screw terminal 5.08", "13 way terminal block 5.08mm", "13P screw terminal 5.08", "13 position terminal block 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-14-5.08"
title = "Screw terminal block, 14 positions, 5.08 mm (MKDS 1,5)"
params = { series = "MKDS 1,5", pitch = 5.08, positions = 14 }
aliases = ["MKDS-1,5-14-5.08", "MKDS 1,5/14-5,08", "14 pin screw terminal 5.08", "14 way terminal block 5.08mm", "14P screw terminal 5.08", "14 position terminal block 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-15-5.08"
title = "Screw terminal block, 15 positions, 5.08 mm (MKDS 1,5)"
params = { series = "MKDS 1,5", pitch = 5.08, positions = 15 }
aliases = ["MKDS-1,5-15-5.08", "MKDS 1,5/15-5,08", "15 pin screw terminal 5.08", "15 way terminal block 5.08mm", "15P screw terminal 5.08", "15 position terminal block 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-16-5.08"
title = "Screw terminal block, 16 positions, 5.08 mm (MKDS 1,5)"
params = { series = "MKDS 1,5", pitch = 5.08, positions = 16 }
aliases = ["MKDS-1,5-16-5.08", "MKDS 1,5/16-5,08", "16 pin screw terminal 5.08", "16 way terminal block 5.08mm", "16P screw terminal 5.08", "16 position terminal block 5.08"]
standard = "Phoenix Contact"

[[presets]]
id = "MPT0.5-2-2.54"
title = "Screw terminal block, 2 positions, 2.54 mm (MPT 0,5)"
params = { series = "MPT 0,5", pitch = 2.54, positions = 2 }
aliases = ["MPT-0,5-2-2.54", "MPT 0,5/2-2,54", "2 pin screw terminal 2.54", "2 way terminal block 2.54mm", "2P screw terminal 2.54", "2 position terminal block 2.54"]
standard = "Phoenix Contact"

[[presets]]
id = "MPT0.5-3-2.54"
title = "Screw terminal block, 3 positions, 2.54 mm (MPT 0,5)"
params = { series = "MPT 0,5", pitch = 2.54, positions = 3 }
aliases = ["MPT-0,5-3-2.54", "MPT 0,5/3-2,54", "3 pin screw terminal 2.54", "3 way terminal block 2.54mm", "3P screw terminal 2.54", "3 position terminal block 2.54"]
standard = "Phoenix Contact"

[[presets]]
id = "MPT0.5-4-2.54"
title = "Screw terminal block, 4 positions, 2.54 mm (MPT 0,5)"
params = { series = "MPT 0,5", pitch = 2.54, positions = 4 }
aliases = ["MPT-0,5-4-2.54", "MPT 0,5/4-2,54", "4 pin screw terminal 2.54", "4 way terminal block 2.54mm", "4P screw terminal 2.54", "4 position terminal block 2.54"]
standard = "Phoenix Contact"

[[presets]]
id = "MPT0.5-5-2.54"
title = "Screw terminal block, 5 positions, 2.54 mm (MPT 0,5)"
params = { series = "MPT 0,5", pitch = 2.54, positions = 5 }
aliases = ["MPT-0,5-5-2.54", "MPT 0,5/5-2,54", "5 pin screw terminal 2.54", "5 way terminal block 2.54mm", "5P screw terminal 2.54", "5 position terminal block 2.54"]
standard = "Phoenix Contact"

[[presets]]
id = "MPT0.5-6-2.54"
title = "Screw terminal block, 6 positions, 2.54 mm (MPT 0,5)"
params = { series = "MPT 0,5", pitch = 2.54, positions = 6 }
aliases = ["MPT-0,5-6-2.54", "MPT 0,5/6-2,54", "6 pin screw terminal 2.54", "6 way terminal block 2.54mm", "6P screw terminal 2.54", "6 position terminal block 2.54"]
standard = "Phoenix Contact"

[[presets]]
id = "MPT0.5-7-2.54"
title = "Screw terminal block, 7 positions, 2.54 mm (MPT 0,5)"
params = { series = "MPT 0,5", pitch = 2.54, positions = 7 }
aliases = ["MPT-0,5-7-2.54", "MPT 0,5/7-2,54", "7 pin screw terminal 2.54", "7 way terminal block 2.54mm", "7P screw terminal 2.54", "7 position terminal block 2.54"]
standard = "Phoenix Contact"

[[presets]]
id = "MPT0.5-8-2.54"
title = "Screw terminal block, 8 positions, 2.54 mm (MPT 0,5)"
params = { series = "MPT 0,5", pitch = 2.54, positions = 8 }
aliases = ["MPT-0,5-8-2.54", "MPT 0,5/8-2,54", "8 pin screw terminal 2.54", "8 way terminal block 2.54mm", "8P screw terminal 2.54", "8 position terminal block 2.54"]
standard = "Phoenix Contact"

[[presets]]
id = "MPT0.5-9-2.54"
title = "Screw terminal block, 9 positions, 2.54 mm (MPT 0,5)"
params = { series = "MPT 0,5", pitch = 2.54, positions = 9 }
aliases = ["MPT-0,5-9-2.54", "MPT 0,5/9-2,54", "9 pin screw terminal 2.54", "9 way terminal block 2.54mm", "9P screw terminal 2.54", "9 position terminal block 2.54"]
standard = "Phoenix Contact"

[[presets]]
id = "MPT0.5-10-2.54"
title = "Screw terminal block, 10 positions, 2.54 mm (MPT 0,5)"
params = { series = "MPT 0,5", pitch = 2.54, positions = 10 }
aliases = ["MPT-0,5-10-2.54", "MPT 0,5/10-2,54", "10 pin screw terminal 2.54", "10 way terminal block 2.54mm", "10P screw terminal 2.54", "10 position terminal block 2.54"]
standard = "Phoenix Contact"

[[presets]]
id = "MPT0.5-11-2.54"
title = "Screw terminal block, 11 positions, 2.54 mm (MPT 0,5)"
params = { series = "MPT 0,5", pitch = 2.54, positions = 11 }
aliases = ["MPT-0,5-11-2.54", "MPT 0,5/11-2,54", "11 pin screw terminal 2.54", "11 way terminal block 2.54mm", "11P screw terminal 2.54", "11 position terminal block 2.54"]
standard = "Phoenix Contact"

[[presets]]
id = "MPT0.5-12-2.54"
title = "Screw terminal block, 12 positions, 2.54 mm (MPT 0,5)"
params = { series = "MPT 0,5", pitch = 2.54, positions = 12 }
aliases = ["MPT-0,5-12-2.54", "MPT 0,5/12-2,54", "12 pin screw terminal 2.54", "12 way terminal block 2.54mm", "12P screw terminal 2.54", "12 position terminal block 2.54"]
standard = "Phoenix Contact"

[[presets]]
id = "PT1.5-2-3.5"
title = "Screw terminal block, 2 positions, 3.5 mm (PT 1,5)"
params = { series = "PT 1,5", pitch = 3.5, positions = 2 }
aliases = ["PT-1,5-2-3.5", "PT 1,5/2-3,5", "2 pin screw terminal 3.5", "2 way terminal block 3.5mm", "2P screw terminal 3.5", "2 position terminal block 3.5"]
standard = "Phoenix Contact"

[[presets]]
id = "PT1.5-3-3.5"
title = "Screw terminal block, 3 positions, 3.5 mm (PT 1,5)"
params = { series = "PT 1,5", pitch = 3.5, positions = 3 }
aliases = ["PT-1,5-3-3.5", "PT 1,5/3-3,5", "3 pin screw terminal 3.5", "3 way terminal block 3.5mm", "3P screw terminal 3.5", "3 position terminal block 3.5"]
standard = "Phoenix Contact"

[[presets]]
id = "PT1.5-4-3.5"
title = "Screw terminal block, 4 positions, 3.5 mm (PT 1,5)"
params = { series = "PT 1,5", pitch = 3.5, positions = 4 }
aliases = ["PT-1,5-4-3.5", "PT 1,5/4-3,5", "4 pin screw terminal 3.5", "4 way terminal block 3.5mm", "4P screw terminal 3.5", "4 position terminal block 3.5"]
standard = "Phoenix Contact"

[[presets]]
id = "PT1.5-5-3.5"
title = "Screw terminal block, 5 positions, 3.5 mm (PT 1,5)"
params = { series = "PT 1,5", pitch = 3.5, positions = 5 }
aliases = ["PT-1,5-5-3.5", "PT 1,5/5-3,5", "5 pin screw terminal 3.5", "5 way terminal block 3.5mm", "5P screw terminal 3.5", "5 position terminal block 3.5"]
standard = "Phoenix Contact"

[[presets]]
id = "PT1.5-6-3.5"
title = "Screw terminal block, 6 positions, 3.5 mm (PT 1,5)"
params = { series = "PT 1,5", pitch = 3.5, positions = 6 }
aliases = ["PT-1,5-6-3.5", "PT 1,5/6-3,5", "6 pin screw terminal 3.5", "6 way terminal block 3.5mm", "6P screw terminal 3.5", "6 position terminal block 3.5"]
standard = "Phoenix Contact"

[[presets]]
id = "PT1.5-7-3.5"
title = "Screw terminal block, 7 positions, 3.5 mm (PT 1,5)"
params = { series = "PT 1,5", pitch = 3.5, positions = 7 }
aliases = ["PT-1,5-7-3.5", "PT 1,5/7-3,5", "7 pin screw terminal 3.5", "7 way terminal block 3.5mm", "7P screw terminal 3.5", "7 position terminal block 3.5"]
standard = "Phoenix Contact"

[[presets]]
id = "PT1.5-8-3.5"
title = "Screw terminal block, 8 positions, 3.5 mm (PT 1,5)"
params = { series = "PT 1,5", pitch = 3.5, positions = 8 }
aliases = ["PT-1,5-8-3.5", "PT 1,5/8-3,5", "8 pin screw terminal 3.5", "8 way terminal block 3.5mm", "8P screw terminal 3.5", "8 position terminal block 3.5"]
standard = "Phoenix Contact"

[[presets]]
id = "PT1.5-9-3.5"
title = "Screw terminal block, 9 positions, 3.5 mm (PT 1,5)"
params = { series = "PT 1,5", pitch = 3.5, positions = 9 }
aliases = ["PT-1,5-9-3.5", "PT 1,5/9-3,5", "9 pin screw terminal 3.5", "9 way terminal block 3.5mm", "9P screw terminal 3.5", "9 position terminal block 3.5"]
standard = "Phoenix Contact"

[[presets]]
id = "PT1.5-10-3.5"
title = "Screw terminal block, 10 positions, 3.5 mm (PT 1,5)"
params = { series = "PT 1,5", pitch = 3.5, positions = 10 }
aliases = ["PT-1,5-10-3.5", "PT 1,5/10-3,5", "10 pin screw terminal 3.5", "10 way terminal block 3.5mm", "10P screw terminal 3.5", "10 position terminal block 3.5"]
standard = "Phoenix Contact"

[[presets]]
id = "PT1.5-11-3.5"
title = "Screw terminal block, 11 positions, 3.5 mm (PT 1,5)"
params = { series = "PT 1,5", pitch = 3.5, positions = 11 }
aliases = ["PT-1,5-11-3.5", "PT 1,5/11-3,5", "11 pin screw terminal 3.5", "11 way terminal block 3.5mm", "11P screw terminal 3.5", "11 position terminal block 3.5"]
standard = "Phoenix Contact"

[[presets]]
id = "PT1.5-12-3.5"
title = "Screw terminal block, 12 positions, 3.5 mm (PT 1,5)"
params = { series = "PT 1,5", pitch = 3.5, positions = 12 }
aliases = ["PT-1,5-12-3.5", "PT 1,5/12-3,5", "12 pin screw terminal 3.5", "12 way terminal block 3.5mm", "12P screw terminal 3.5", "12 position terminal block 3.5"]
standard = "Phoenix Contact"

[[presets]]
id = "PT1.5-13-3.5"
title = "Screw terminal block, 13 positions, 3.5 mm (PT 1,5)"
params = { series = "PT 1,5", pitch = 3.5, positions = 13 }
aliases = ["PT-1,5-13-3.5", "PT 1,5/13-3,5", "13 pin screw terminal 3.5", "13 way terminal block 3.5mm", "13P screw terminal 3.5", "13 position terminal block 3.5"]
standard = "Phoenix Contact"

[[presets]]
id = "PT1.5-14-3.5"
title = "Screw terminal block, 14 positions, 3.5 mm (PT 1,5)"
params = { series = "PT 1,5", pitch = 3.5, positions = 14 }
aliases = ["PT-1,5-14-3.5", "PT 1,5/14-3,5", "14 pin screw terminal 3.5", "14 way terminal block 3.5mm", "14P screw terminal 3.5", "14 position terminal block 3.5"]
standard = "Phoenix Contact"

[[presets]]
id = "PT1.5-15-3.5"
title = "Screw terminal block, 15 positions, 3.5 mm (PT 1,5)"
params = { series = "PT 1,5", pitch = 3.5, positions = 15 }
aliases = ["PT-1,5-15-3.5", "PT 1,5/15-3,5", "15 pin screw terminal 3.5", "15 way terminal block 3.5mm", "15P screw terminal 3.5", "15 position terminal block 3.5"]
standard = "Phoenix Contact"

[[presets]]
id = "PT1.5-16-3.5"
title = "Screw terminal block, 16 positions, 3.5 mm (PT 1,5)"
params = { series = "PT 1,5", pitch = 3.5, positions = 16 }
aliases = ["PT-1,5-16-3.5", "PT 1,5/16-3,5", "16 pin screw terminal 3.5", "16 way terminal block 3.5mm", "16P screw terminal 3.5", "16 position terminal block 3.5"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-2-5.08-simple"
title = "Screw terminal block, 2 positions, 5.08 mm, simple"
params = { series = "MKDS 1,5", pitch = 5.08, positions = 2, detail = "simple" }
aliases = ["MKDS 1,5/2-5,08 simple"]
standard = "Phoenix Contact"

README.md 23 lines · Markdown

Download

Screw terminal block

A PCB screw terminal block of the Phoenix Contact MKDS 1,5 (5.0 or 5.08 mm pitch), PT 1,5 (3.5 mm) or MPT 0,5 (2.54 mm) type. Pin 1 is at the origin, the row runs along +X, the housing sits on the XY plane with the wire entries facing -Y and the screws on top, and the solder pins go down through the board.

Source

Phoenix Contact data sheet, PCB terminal block MKDS 1,5/ 2-5,08 (1715721), a copy at https://uploadcdn.oneyac.com/attachments/files/brand_pdf/phoenixcontact/A4/EA/MKDS152-508.pdf (Phoenix Contact's own site refuses automated downloads). The data sheet is for the 2-position, 5.08 mm part. Dimensions (page 4):

width a + pitch, where a is the distance between the end pins
installed height 13.8, length 9.8
solder pins 3.5 long and 0.9 x 0.9

The dimensional drawing (page 8) shows the pins 4.6 from the wire-entry face, and the same housing with 5 and 5.08 mm pitch.

PT 1,5: data sheet PT 1,5/ 5-3,5-H (1984646), Drawings page 4, a copy at https://img.pcbx.com/erp/file/part/spec/1984646-Phoenix Contact.pdf: width a + 3.5, height 9.2, length 7.6, pins 4.5 long, 3.1 from the back face.
MPT 0,5: data sheet MPT 0,5/ 2-2,54 (1725656), page 5 and dimensional drawing page 6, a copy at https://static.chipdip.ru/lib/776/DOC031776037.pdf: width 5.54 for 2 positions (1.5 past each end pin), height 8.5, length 6.2, pins 3.5 long, 0.5 x 0.9, 3.1 from the back face.

Each data sheet is for one position count; the others follow the drawing's a + pitch rule.

Proportions, for looks only: the side profile's step and slope, and the wire entry and screw opening sizes. The screws and clamps aren't modelled. The housing is PA; the part uses pa6, green.

The 3.81 mm MKDS, PT 1,5 at 5.0 mm and other makers' blocks aren't here yet; see COVERAGE.md.

# Screw terminal block

A PCB screw terminal block of the Phoenix Contact MKDS 1,5 (5.0 or 5.08 mm pitch), PT 1,5 (3.5 mm) or MPT 0,5 (2.54 mm) type. Pin 1 is at the origin, the row runs along +X, the housing sits on the XY plane with the wire entries facing -Y and the screws on top, and the solder pins go down through the board.

## Source

Phoenix Contact data sheet, *PCB terminal block MKDS 1,5/ 2-5,08* (1715721), a copy at <https://uploadcdn.oneyac.com/attachments/files/brand_pdf/phoenixcontact/A4/EA/MKDS152-508.pdf> (Phoenix Contact's own site refuses automated downloads). The data sheet is for the 2-position, 5.08 mm part. Dimensions (page 4):

- width a + pitch, where a is the distance between the end pins
- installed height 13.8, length 9.8
- solder pins 3.5 long and 0.9 x 0.9

The dimensional drawing (page 8) shows the pins 4.6 from the wire-entry face, and the same housing with 5 and 5.08 mm pitch.

- PT 1,5: data sheet *PT 1,5/ 5-3,5-H* (1984646), Drawings page 4, a copy at <https://img.pcbx.com/erp/file/part/spec/1984646-Phoenix%20Contact.pdf>: width a + 3.5, height 9.2, length 7.6, pins 4.5 long, 3.1 from the back face.
- MPT 0,5: data sheet *MPT 0,5/ 2-2,54* (1725656), page 5 and dimensional drawing page 6, a copy at <https://static.chipdip.ru/lib/776/DOC031776037.pdf>: width 5.54 for 2 positions (1.5 past each end pin), height 8.5, length 6.2, pins 3.5 long, 0.5 x 0.9, 3.1 from the back face.

Each data sheet is for one position count; the others follow the drawing's a + pitch rule.

**Proportions, for looks only:** the side profile's step and slope, and the wire entry and screw opening sizes. The screws and clamps aren't modelled. The housing is PA; the part uses `pa6`, green.

The 3.81 mm MKDS, PT 1,5 at 5.0 mm and other makers' blocks aren't here yet; see `COVERAGE.md`.

Use this part

STEVE

Open in STEVE

Open it in STEVE The STEVE runtime runs in STEVE: open the part there, or download the code and bundle.

Get the code

curl -o part.py "https://pythonparts.org/p/steve/screw-terminal-block/v/1.1.0/raw/part.py"

Raw files, bundle and API

curl "https://pythonparts.org/api/v1/parts/steve/screw-terminal-block/1.1.0"

The version's JSON (parameters, presets, files); add /build?name=value for a build at other values.

About this part

steve94 parts

Profile

Polyamide 6 (nylon 6)Plastics · Custom finish · 1.15 g/cm³

Mass: 1.31 g

At the parameters shown in the viewer.

License: MIT

Permissive: use, change and sell it; keep the copyright notice.

Runtime: STEVE
Requirements: None stated in the code
Built with: CadQuery 2.9.0.dev0
Published: Nov 5, 2026
Downloads: 0
Builds: 0
Stars: 0
Bundle: 5218f481bb0c…

#terminal-block #screw-terminal #phoenix #mkds #connector #electronics

Checks

PassedImports: steve

Every published part passes our checks before it’s listed. It is still code: read it before you use it.

Request a removal A copyright notice, or a trademark, confidential design, safety, malicious code or other problem. Report an illegal or prohibited item

PCB screw terminal block of the MKDS 1,5, PT 1,5 or MPT 0,5 type, with wire entries, screw openings and solder pins. Width, height, length and pins from Phoenix Contact's data sheets. See the README.

Screw terminal block

Source

width a + pitch, where a is the distance between the end pins
installed height 13.8, length 9.8
solder pins 3.5 long and 0.9 x 0.9

The dimensional drawing (page 8) shows the pins 4.6 from the wire-entry face, and the same housing with 5 and 5.08 mm pitch.

PT 1,5: data sheet PT 1,5/ 5-3,5-H (1984646), Drawings page 4, a copy at https://img.pcbx.com/erp/file/part/spec/1984646-Phoenix Contact.pdf: width a + 3.5, height 9.2, length 7.6, pins 4.5 long, 3.1 from the back face.
MPT 0,5: data sheet MPT 0,5/ 2-2,54 (1725656), page 5 and dimensional drawing page 6, a copy at https://static.chipdip.ru/lib/776/DOC031776037.pdf: width 5.54 for 2 positions (1.5 past each end pin), height 8.5, length 6.2, pins 3.5 long, 0.5 x 0.9, 3.1 from the back face.

Each data sheet is for one position count; the others follow the drawing's a + pitch rule.

Proportions, for looks only: the side profile's step and slope, and the wire entry and screw opening sizes. The screws and clamps aren't modelled. The housing is PA; the part uses pa6, green.

The 3.81 mm MKDS, PT 1,5 at 5.0 mm and other makers' blocks aren't here yet; see COVERAGE.md.

1.1.0 Latest Nov 5, 2026 · 51 minutes ago Compare with 1.0.0

PT 1,5 at 3.5 mm and MPT 0,5 at 2.54 mm. MKDS 1,5 parts are unchanged.
1.0.0 Nov 5, 2026 · 1 hour ago

More #terminal-block

STEVEMIT

steve/pluggable-terminal-header

PCB header for pluggable terminal blocks: right-angle Phoenix Contact MSTBA 2,5 (5.0, 5.08 mm) and MC 1,5 (3.81 mm) types, and vertical MSTBVA 2,5 (5.08 mm), 2 to 16 positions.

0 61 sizes 0 34 minutes ago v1.2.0

STEVEMIT

steve/pin-socket

Straight through-hole pin socket, 2.54 mm pitch, one or two rows, 1 to 40 pins per row.

0 81 sizes 0 1 hour ago v1.0.0

STEVEMIT

steve/pin-header

Through-hole pin header, 2.54 mm and 2.00 mm pitch, one or two rows, 1 to 40 pins per row, straight or right-angle.

0 241 sizes 0 1 hour ago v1.1.0

STEVEMIT

steve/jst-xh-header

JST XH shrouded header, 2.5 mm pitch, top entry: B2B-XH-A to B16B-XH-A and B20B-XH-A.

0 17 sizes 0 1 hour ago v1.0.0

steve/screw-terminal-block

Screw terminal block

Source

Screw terminal block

Source

Related parts

steve/pluggable-terminal-header

steve/pin-socket

steve/pin-header

steve/jst-xh-header