STEVEMIT
steve/hex-head-screw
Hexagon head screw, fully threaded, ISO 4017 / DIN 933, M1.6 to M36, any length, with catalogue sizes as presets.
steve
Publishing on Python Parts since October 2026
58recipes
3,607parts
51downloads
5builds
0stars
STEVEMIT
steve/button-head-screw
Hexagon socket button head screw, ISO 7380-1, M3 to M16, any length, with catalogue sizes as presets.
STEVEMIT
steve/hex-nut
Hex nut, ISO 4032, M2 to M12.
STEVEMIT
steve/split-lock-washer
Split lock washer (spring washer), DIN 127 form B, M2 to M100.
STEVEMIT
steve/plate
Rectangular plate blank, any width, length and thickness, in common plate and sheet materials.
STEVEMIT
steve/deep-groove-ball-bearing
Deep groove ball bearing, metric: 6xx, MR, 60, 62, 63, 68 and 69 series, open, ZZ or 2RS, optional flange.
STEVEMIT
steve/t-slot-extrusion
T-slot aluminium extrusions with real cross-sections (2020, 2040, 3030, 3060, 4040, 4080; slot 5, 6, 8), any length.
STEVEMIT
steve/tab-washer
Tab washers, flat as delivered: DIN 93 (long tab) and DIN 463 (long and short tab), M3 to M52.
STEVEMIT
steve/square-bar
Square bar, EN 10059 sizes and plain square stock, any side and length.
STEVEMIT
steve/spring-lock-washer
Metric curved spring washers (DIN 137 A) and external tooth lock washers (DIN 6797 A), M2 to M10.
STEVEMIT
steve/spring-plunger
Spring plungers M3 to M10: Elesa+Ganter GN 615-K ball spring plungers and GN 615.1-B bolt spring plungers.
STEVEMIT
steve/countersunk-screw
Hexagon socket countersunk head screw, ISO 10642 / DIN 7991, M3 to M12, any length, with catalogue sizes as presets.
STEVEMIT
steve/v-slot-extrusion
20 x 20 V-slot aluminium extrusion, any length, measured from the published FreeCAD-library model.
STEVEMIT
steve/socket-head-cap-screw
Socket head cap screw, ISO 4762 / DIN 912, M1.6 to M64, any length, with catalogue sizes as presets.
STEVEMIT
steve/smt-spacer
Würth Elektronik SMT steel spacers: WA-SMSI, WA-SMST, WA-SMSE and WA-SMSR, any length.
STEVEMIT
steve/slotted-spring-pin
Slotted spring pin (roll pin), heavy duty, ISO 8752 / DIN 1481, d 1 to 50 mm, any length.
STEVEMIT
steve/set-screw
Hexagon socket set screw with flat point, ISO 4026 / DIN 913, M3 to M12, length from d, with catalogue sizes as presets.
STEVEMIT
steve/round-tube
Round tube, any outside diameter, wall and length; presets from EN 10305-1 and EN 10220 sizes.
STEVEMIT
steve/round-spacer
Round unthreaded clearance spacer for M3 screws (Harwin R30-601): Ø4.76 × Ø3.30, any length.
STEVEMIT
steve/round-bar
Round bar / round rod, EN 10060 sizes and plain round stock, any diameter and length.
STEVEMIT
steve/retaining-ring
External retaining ring (circlip) for shafts, DIN 471 pattern, shafts 10 to 34 mm, measured from published models.
STEVEMIT
steve/pcb-support
PCB support post (snap-in, adhesive-backed, swage, press-fit), M2 to M4, any height: simplified, measured from step.parts' models.
STEVEMIT
steve/pcb-card-guide
PCB card guide and board retaining clip, boards 1 to 2.4 mm, any length: simplified, measured from step.parts' models.
STEVEMIT
steve/miniature-linear-guide
HIWIN MGN miniature linear guideway, sizes 7, 9, 12 and 15: rail (MGNR) or block (MGN-C / MGN-H).