steve/wirewound-power-inductor

Wire-wound shielded SMD power inductors in the Sunlord SWPA sizes, 2.5 x 2.0 mm to 8 x 8 mm, by the maker's dimension table.

v1.0.0 Latest STEVE MIT 0

Open in STEVE

Isometric

Parameters

Preset23 sizes

Size23 options

Defaults built

part.py 55 lines · Python · STEVE runtime · checked

Download

"""Wire-wound shielded SMD power inductor, Sunlord SWPA series sizes. Centred on the origin, sitting on the XY plane, with the two bottom terminals at

the -X and +X sides. Dimensions from Sunlord's SWPA datasheet table for the size named by `series`; see the README."""

from steve import Model

series = "SWPA4030S" # Sunlord SWPA size code

# size: (drawing, A along the terminals' spacing, B, C height max, D terminal length, E terminal width, F gap between the terminals), ranges (min, max),

# mm. Sunlord "Wire Wound SMD Power Inductors - SWPA Series", Revised 2019/04/01, Shape and Dimensions table (page 2).

SIZES = {

"SWPA252010S": ("Fig.1", (2.4, 2.6), (1.9, 2.1), 1.0, (1.8, 2.2), (0.6, 1), (0.6, 1)),

"SWPA252012S": ("Fig.1", (2.4, 2.6), (1.9, 2.1), 1.2, (1.8, 2.2), (0.6, 1), (0.6, 1)),

"SWPA3010S": ("Fig.2", (2.8, 3.2), (2.8, 3.2), 1.0, (2.3, 2.7), (0.55, 0.95), (1.3, 1.7)),

"SWPA3012S": ("Fig.2", (2.8, 3.2), (2.8, 3.2), 1.2, (2.3, 2.7), (0.55, 0.95), (1.3, 1.7)),

"SWPA3015S": ("Fig.2", (2.8, 3.2), (2.8, 3.2), 1.5, (2.3, 2.7), (0.55, 0.95), (1.3, 1.7)),

"SWPA4010S": ("Fig.2", (3.8, 4.2), (3.8, 4.2), 1.0, (3.1, 3.5), (0.75, 1.15), (1.9, 2.3)),

"SWPA4012S": ("Fig.2", (3.8, 4.2), (3.8, 4.2), 1.2, (3.1, 3.5), (0.75, 1.15), (1.9, 2.3)),

"SWPA4018S": ("Fig.2", (3.8, 4.2), (3.8, 4.2), 1.8, (3.1, 3.5), (0.75, 1.15), (1.9, 2.3)),

"SWPA4020S": ("Fig.2", (3.8, 4.2), (3.8, 4.2), 2.0, (3.1, 3.5), (0.75, 1.15), (1.9, 2.3)),

"SWPA4026S": ("Fig.2", (3.8, 4.2), (3.8, 4.2), 2.6, (3.1, 3.5), (0.75, 1.15), (1.9, 2.3)),

"SWPA4030S": ("Fig.2", (3.8, 4.2), (3.8, 4.2), 3.0, (3.1, 3.5), (0.75, 1.15), (1.9, 2.3)),

"SWPA5012S": ("Fig.3", (4.8, 5.2), (4.8, 5.2), 1.2, (3.8, 4.2), (1.05, 1.45), (2.3, 2.7)),

"SWPA5020S": ("Fig.3", (4.8, 5.2), (4.8, 5.2), 2.0, (3.8, 4.2), (1.05, 1.45), (2.3, 2.7)),

"SWPA5040S": ("Fig.3", (4.8, 5.2), (4.8, 5.2), 4.0, (3.8, 4.2), (1.05, 1.45), (2.3, 2.7)),

"SWPA5045S": ("Fig.3", (4.8, 5.2), (4.8, 5.2), 4.5, (3.8, 4.2), (1.1, 1.5), (2.3, 2.7)),

"SWPA6020S": ("Fig.2", (5.7, 6.3), (5.7, 6.3), 2.0, (4.6, 5.2), (1.25, 1.85), (2.6, 3.2)),

"SWPA6028S": ("Fig.2", (5.7, 6.3), (5.7, 6.3), 2.8, (4.6, 5.2), (1.25, 1.85), (2.6, 3.2)),

"SWPA6040S": ("Fig.2", (5.7, 6.3), (5.7, 6.3), 4.0, (4.6, 5.2), (1.25, 1.85), (2.6, 3.2)),

"SWPA6045S": ("Fig.2", (5.7, 6.3), (5.7, 6.3), 4.5, (4.6, 5.2), (1.25, 1.85), (2.6, 3.2)),

"SWPA8040S": ("Fig.2", (7.7, 8.3), (7.7, 8.3), 4.2, (6, 6.6), (1.7, 2.3), (3.7, 4.3)),

"SWPA8050S": ("Fig.3", (7.7, 8.3), (7.7, 8.3), 5.0, (6, 6.6), (1.7, 2.3), (3.7, 4.3)),

"SWPA8060S": ("Fig.3", (7.7, 8.3), (7.7, 8.3), 6.0, (6, 6.6), (1.7, 2.3), (3.7, 4.3)),

"SWPA8065S": ("Fig.3", (7.7, 8.3), (7.7, 8.3), 6.5, (6, 6.6), (1.7, 2.3), (3.7, 4.3)),

}

PAD_T = 0.1 # terminal thickness under the body: a proportion, for looks

def mid(pair):

return (pair[0] + pair[1]) / 2

fig, A, B, top, D, E, F = SIZES[series]

along, across, term_l, term_w, gap = mid(A), mid(B), mid(D), mid(E), mid(F)

model = Model()

model.plane("body_plane", on="XY", offset=PAD_T, name="Body")

with model.sketch("body_sketch", on="body_plane", name="Body") as sk:

sk.rect("body_rect", (-along / 2, -across / 2), (along / 2, across / 2))

model.extrude("body", "body_sketch", distance=top - PAD_T, name="Body")

outer = min(gap / 2 + term_w, along / 2) # SWPA5045S's nominal E + F + E is 5.1 against A 5.0: the terminals stop at the body's side

with model.sketch("terms_sketch", on="XY", name="Terminals") as sk:

sk.rect("term_left", (-outer, -term_l / 2), (-gap / 2, term_l / 2))

sk.rect("term_right", (gap / 2, -term_l / 2), (outer, term_l / 2))

model.extrude("terms", "terms_sketch", distance=PAD_T + 0.05, name="Terminals")

model.material("pla", color="#3a3c40")

result = model.result()

"""Wire-wound shielded SMD power inductor, Sunlord SWPA series sizes. Centred on the origin, sitting on the XY plane, with the two bottom terminals at
the -X and +X sides. Dimensions from Sunlord's SWPA datasheet table for the size named by `series`; see the README."""
from steve import Model

series = "SWPA4030S"  # Sunlord SWPA size code

# size: (drawing, A along the terminals' spacing, B, C height max, D terminal length, E terminal width, F gap between the terminals), ranges (min, max),
# mm. Sunlord "Wire Wound SMD Power Inductors - SWPA Series", Revised 2019/04/01, Shape and Dimensions table (page 2).
SIZES = {
    "SWPA252010S": ("Fig.1", (2.4, 2.6), (1.9, 2.1), 1.0, (1.8, 2.2), (0.6, 1), (0.6, 1)),
    "SWPA252012S": ("Fig.1", (2.4, 2.6), (1.9, 2.1), 1.2, (1.8, 2.2), (0.6, 1), (0.6, 1)),
    "SWPA3010S": ("Fig.2", (2.8, 3.2), (2.8, 3.2), 1.0, (2.3, 2.7), (0.55, 0.95), (1.3, 1.7)),
    "SWPA3012S": ("Fig.2", (2.8, 3.2), (2.8, 3.2), 1.2, (2.3, 2.7), (0.55, 0.95), (1.3, 1.7)),
    "SWPA3015S": ("Fig.2", (2.8, 3.2), (2.8, 3.2), 1.5, (2.3, 2.7), (0.55, 0.95), (1.3, 1.7)),
    "SWPA4010S": ("Fig.2", (3.8, 4.2), (3.8, 4.2), 1.0, (3.1, 3.5), (0.75, 1.15), (1.9, 2.3)),
    "SWPA4012S": ("Fig.2", (3.8, 4.2), (3.8, 4.2), 1.2, (3.1, 3.5), (0.75, 1.15), (1.9, 2.3)),
    "SWPA4018S": ("Fig.2", (3.8, 4.2), (3.8, 4.2), 1.8, (3.1, 3.5), (0.75, 1.15), (1.9, 2.3)),
    "SWPA4020S": ("Fig.2", (3.8, 4.2), (3.8, 4.2), 2.0, (3.1, 3.5), (0.75, 1.15), (1.9, 2.3)),
    "SWPA4026S": ("Fig.2", (3.8, 4.2), (3.8, 4.2), 2.6, (3.1, 3.5), (0.75, 1.15), (1.9, 2.3)),
    "SWPA4030S": ("Fig.2", (3.8, 4.2), (3.8, 4.2), 3.0, (3.1, 3.5), (0.75, 1.15), (1.9, 2.3)),
    "SWPA5012S": ("Fig.3", (4.8, 5.2), (4.8, 5.2), 1.2, (3.8, 4.2), (1.05, 1.45), (2.3, 2.7)),
    "SWPA5020S": ("Fig.3", (4.8, 5.2), (4.8, 5.2), 2.0, (3.8, 4.2), (1.05, 1.45), (2.3, 2.7)),
    "SWPA5040S": ("Fig.3", (4.8, 5.2), (4.8, 5.2), 4.0, (3.8, 4.2), (1.05, 1.45), (2.3, 2.7)),
    "SWPA5045S": ("Fig.3", (4.8, 5.2), (4.8, 5.2), 4.5, (3.8, 4.2), (1.1, 1.5), (2.3, 2.7)),
    "SWPA6020S": ("Fig.2", (5.7, 6.3), (5.7, 6.3), 2.0, (4.6, 5.2), (1.25, 1.85), (2.6, 3.2)),
    "SWPA6028S": ("Fig.2", (5.7, 6.3), (5.7, 6.3), 2.8, (4.6, 5.2), (1.25, 1.85), (2.6, 3.2)),
    "SWPA6040S": ("Fig.2", (5.7, 6.3), (5.7, 6.3), 4.0, (4.6, 5.2), (1.25, 1.85), (2.6, 3.2)),
    "SWPA6045S": ("Fig.2", (5.7, 6.3), (5.7, 6.3), 4.5, (4.6, 5.2), (1.25, 1.85), (2.6, 3.2)),
    "SWPA8040S": ("Fig.2", (7.7, 8.3), (7.7, 8.3), 4.2, (6, 6.6), (1.7, 2.3), (3.7, 4.3)),
    "SWPA8050S": ("Fig.3", (7.7, 8.3), (7.7, 8.3), 5.0, (6, 6.6), (1.7, 2.3), (3.7, 4.3)),
    "SWPA8060S": ("Fig.3", (7.7, 8.3), (7.7, 8.3), 6.0, (6, 6.6), (1.7, 2.3), (3.7, 4.3)),
    "SWPA8065S": ("Fig.3", (7.7, 8.3), (7.7, 8.3), 6.5, (6, 6.6), (1.7, 2.3), (3.7, 4.3)),
}
PAD_T = 0.1   # terminal thickness under the body: a proportion, for looks


def mid(pair):
    return (pair[0] + pair[1]) / 2


fig, A, B, top, D, E, F = SIZES[series]
along, across, term_l, term_w, gap = mid(A), mid(B), mid(D), mid(E), mid(F)
model = Model()
model.plane("body_plane", on="XY", offset=PAD_T, name="Body")
with model.sketch("body_sketch", on="body_plane", name="Body") as sk:
    sk.rect("body_rect", (-along / 2, -across / 2), (along / 2, across / 2))
model.extrude("body", "body_sketch", distance=top - PAD_T, name="Body")
outer = min(gap / 2 + term_w, along / 2)   # SWPA5045S's nominal E + F + E is 5.1 against A 5.0: the terminals stop at the body's side
with model.sketch("terms_sketch", on="XY", name="Terminals") as sk:
    sk.rect("term_left", (-outer, -term_l / 2), (-gap / 2, term_l / 2))
    sk.rect("term_right", (gap / 2, -term_l / 2), (outer, term_l / 2))
model.extrude("terms", "terms_sketch", distance=PAD_T + 0.05, name="Terminals")
model.material("pla", color="#3a3c40")
result = model.result()

pypart.toml 152 lines · TOML

Download

name = "steve/wirewound-power-inductor"

version = "1.0.0"

runtime = "steve"

license = "MIT"

summary = "Wire-wound shielded SMD power inductors in the Sunlord SWPA sizes, 2.5 x 2.0 mm to 8 x 8 mm, by the maker's dimension table."

description = """Wire-wound shielded SMD power inductors for board layouts: body and the two bottom terminals, sized from Sunlord's SWPA datasheet table. See the README."""

tags = ["inductor", "power-inductor", "wire-wound", "shielded", "smd", "electronics"]

[parameters.series]

type = "choice"

default = "SWPA4030S"

choices = ["SWPA252010S", "SWPA252012S", "SWPA3010S", "SWPA3012S", "SWPA3015S", "SWPA4010S", "SWPA4012S", "SWPA4018S", "SWPA4020S", "SWPA4026S", "SWPA4030S", "SWPA5012S", "SWPA5020S", "SWPA5040S", "SWPA5045S", "SWPA6020S", "SWPA6028S", "SWPA6040S", "SWPA6045S", "SWPA8040S", "SWPA8050S", "SWPA8060S", "SWPA8065S"]

label = "Size"

[[presets]]

id = "SWPA252010S"

title = "SWPA252010S wire-wound power inductor, 2.5 x 2 x 1 mm"

params = { series = "SWPA252010S" }

aliases = ["Sunlord SWPA252010S", "SWPA252010S inductor"]

[[presets]]

id = "SWPA252012S"

title = "SWPA252012S wire-wound power inductor, 2.5 x 2 x 1.2 mm"

params = { series = "SWPA252012S" }

aliases = ["Sunlord SWPA252012S", "SWPA252012S inductor"]

[[presets]]

id = "SWPA3010S"

title = "SWPA3010S wire-wound power inductor, 3 x 3 x 1 mm"

params = { series = "SWPA3010S" }

aliases = ["Sunlord SWPA3010S", "SWPA3010S inductor"]

[[presets]]

id = "SWPA3012S"

title = "SWPA3012S wire-wound power inductor, 3 x 3 x 1.2 mm"

params = { series = "SWPA3012S" }

aliases = ["Sunlord SWPA3012S", "SWPA3012S inductor"]

[[presets]]

id = "SWPA3015S"

title = "SWPA3015S wire-wound power inductor, 3 x 3 x 1.5 mm"

params = { series = "SWPA3015S" }

aliases = ["Sunlord SWPA3015S", "SWPA3015S inductor"]

[[presets]]

id = "SWPA4010S"

title = "SWPA4010S wire-wound power inductor, 4 x 4 x 1 mm"

params = { series = "SWPA4010S" }

aliases = ["Sunlord SWPA4010S", "SWPA4010S inductor"]

[[presets]]

id = "SWPA4012S"

title = "SWPA4012S wire-wound power inductor, 4 x 4 x 1.2 mm"

params = { series = "SWPA4012S" }

aliases = ["Sunlord SWPA4012S", "SWPA4012S inductor"]

[[presets]]

id = "SWPA4018S"

title = "SWPA4018S wire-wound power inductor, 4 x 4 x 1.8 mm"

params = { series = "SWPA4018S" }

aliases = ["Sunlord SWPA4018S", "SWPA4018S inductor"]

[[presets]]

id = "SWPA4020S"

title = "SWPA4020S wire-wound power inductor, 4 x 4 x 2 mm"

params = { series = "SWPA4020S" }

aliases = ["Sunlord SWPA4020S", "SWPA4020S inductor"]

[[presets]]

id = "SWPA4026S"

title = "SWPA4026S wire-wound power inductor, 4 x 4 x 2.6 mm"

params = { series = "SWPA4026S" }

aliases = ["Sunlord SWPA4026S", "SWPA4026S inductor"]

[[presets]]

id = "SWPA4030S"

title = "SWPA4030S wire-wound power inductor, 4 x 4 x 3 mm"

params = { series = "SWPA4030S" }

aliases = ["Sunlord SWPA4030S", "SWPA4030S inductor"]

[[presets]]

id = "SWPA5012S"

title = "SWPA5012S wire-wound power inductor, 5 x 5 x 1.2 mm"

params = { series = "SWPA5012S" }

aliases = ["Sunlord SWPA5012S", "SWPA5012S inductor"]

[[presets]]

id = "SWPA5020S"

title = "SWPA5020S wire-wound power inductor, 5 x 5 x 2 mm"

params = { series = "SWPA5020S" }

aliases = ["Sunlord SWPA5020S", "SWPA5020S inductor"]

[[presets]]

id = "SWPA5040S"

title = "SWPA5040S wire-wound power inductor, 5 x 5 x 4 mm"

params = { series = "SWPA5040S" }

aliases = ["Sunlord SWPA5040S", "SWPA5040S inductor"]

[[presets]]

100

id = "SWPA6020S"

101

title = "SWPA6020S wire-wound power inductor, 6 x 6 x 2 mm"

102

params = { series = "SWPA6020S" }

103

aliases = ["Sunlord SWPA6020S", "SWPA6020S inductor"]

104

105

[[presets]]

106

id = "SWPA6028S"

107

title = "SWPA6028S wire-wound power inductor, 6 x 6 x 2.8 mm"

108

params = { series = "SWPA6028S" }

109

aliases = ["Sunlord SWPA6028S", "SWPA6028S inductor"]

110

111

[[presets]]

112

id = "SWPA6040S"

113

title = "SWPA6040S wire-wound power inductor, 6 x 6 x 4 mm"

114

params = { series = "SWPA6040S" }

115

aliases = ["Sunlord SWPA6040S", "SWPA6040S inductor"]

116

117

[[presets]]

118

id = "SWPA6045S"

119

title = "SWPA6045S wire-wound power inductor, 6 x 6 x 4.5 mm"

120

params = { series = "SWPA6045S" }

121

aliases = ["Sunlord SWPA6045S", "SWPA6045S inductor"]

122

123

[[presets]]

124

id = "SWPA8040S"

125

title = "SWPA8040S wire-wound power inductor, 8 x 8 x 4.2 mm"

126

params = { series = "SWPA8040S" }

127

aliases = ["Sunlord SWPA8040S", "SWPA8040S inductor"]

128

129

[[presets]]

130

id = "SWPA5045S"

131

title = "SWPA5045S wire-wound power inductor, 5 x 5 x 4.5 mm"

132

params = { series = "SWPA5045S" }

133

aliases = ["Sunlord SWPA5045S", "SWPA5045S inductor"]

134

135

[[presets]]

136

id = "SWPA8050S"

137

title = "SWPA8050S wire-wound power inductor, 8 x 8 x 5 mm"

138

params = { series = "SWPA8050S" }

139

aliases = ["Sunlord SWPA8050S", "SWPA8050S inductor"]

140

141

[[presets]]

142

id = "SWPA8060S"

143

title = "SWPA8060S wire-wound power inductor, 8 x 8 x 6 mm"

144

params = { series = "SWPA8060S" }

145

aliases = ["Sunlord SWPA8060S", "SWPA8060S inductor"]

146

147

[[presets]]

148

id = "SWPA8065S"

149

title = "SWPA8065S wire-wound power inductor, 8 x 8 x 6.5 mm"

150

params = { series = "SWPA8065S" }

151

aliases = ["Sunlord SWPA8065S", "SWPA8065S inductor"]

152

name = "steve/wirewound-power-inductor"
version = "1.0.0"
runtime = "steve"
license = "MIT"
summary = "Wire-wound shielded SMD power inductors in the Sunlord SWPA sizes, 2.5 x 2.0 mm to 8 x 8 mm, by the maker's dimension table."
description = """Wire-wound shielded SMD power inductors for board layouts: body and the two bottom terminals, sized from Sunlord's SWPA datasheet table. See the README."""
tags = ["inductor", "power-inductor", "wire-wound", "shielded", "smd", "electronics"]

[parameters.series]
type = "choice"
default = "SWPA4030S"
choices = ["SWPA252010S", "SWPA252012S", "SWPA3010S", "SWPA3012S", "SWPA3015S", "SWPA4010S", "SWPA4012S", "SWPA4018S", "SWPA4020S", "SWPA4026S", "SWPA4030S", "SWPA5012S", "SWPA5020S", "SWPA5040S", "SWPA5045S", "SWPA6020S", "SWPA6028S", "SWPA6040S", "SWPA6045S", "SWPA8040S", "SWPA8050S", "SWPA8060S", "SWPA8065S"]
label = "Size"

[[presets]]
id = "SWPA252010S"
title = "SWPA252010S wire-wound power inductor, 2.5 x 2 x 1 mm"
params = { series = "SWPA252010S" }
aliases = ["Sunlord SWPA252010S", "SWPA252010S inductor"]

[[presets]]
id = "SWPA252012S"
title = "SWPA252012S wire-wound power inductor, 2.5 x 2 x 1.2 mm"
params = { series = "SWPA252012S" }
aliases = ["Sunlord SWPA252012S", "SWPA252012S inductor"]

[[presets]]
id = "SWPA3010S"
title = "SWPA3010S wire-wound power inductor, 3 x 3 x 1 mm"
params = { series = "SWPA3010S" }
aliases = ["Sunlord SWPA3010S", "SWPA3010S inductor"]

[[presets]]
id = "SWPA3012S"
title = "SWPA3012S wire-wound power inductor, 3 x 3 x 1.2 mm"
params = { series = "SWPA3012S" }
aliases = ["Sunlord SWPA3012S", "SWPA3012S inductor"]

[[presets]]
id = "SWPA3015S"
title = "SWPA3015S wire-wound power inductor, 3 x 3 x 1.5 mm"
params = { series = "SWPA3015S" }
aliases = ["Sunlord SWPA3015S", "SWPA3015S inductor"]

[[presets]]
id = "SWPA4010S"
title = "SWPA4010S wire-wound power inductor, 4 x 4 x 1 mm"
params = { series = "SWPA4010S" }
aliases = ["Sunlord SWPA4010S", "SWPA4010S inductor"]

[[presets]]
id = "SWPA4012S"
title = "SWPA4012S wire-wound power inductor, 4 x 4 x 1.2 mm"
params = { series = "SWPA4012S" }
aliases = ["Sunlord SWPA4012S", "SWPA4012S inductor"]

[[presets]]
id = "SWPA4018S"
title = "SWPA4018S wire-wound power inductor, 4 x 4 x 1.8 mm"
params = { series = "SWPA4018S" }
aliases = ["Sunlord SWPA4018S", "SWPA4018S inductor"]

[[presets]]
id = "SWPA4020S"
title = "SWPA4020S wire-wound power inductor, 4 x 4 x 2 mm"
params = { series = "SWPA4020S" }
aliases = ["Sunlord SWPA4020S", "SWPA4020S inductor"]

[[presets]]
id = "SWPA4026S"
title = "SWPA4026S wire-wound power inductor, 4 x 4 x 2.6 mm"
params = { series = "SWPA4026S" }
aliases = ["Sunlord SWPA4026S", "SWPA4026S inductor"]

[[presets]]
id = "SWPA4030S"
title = "SWPA4030S wire-wound power inductor, 4 x 4 x 3 mm"
params = { series = "SWPA4030S" }
aliases = ["Sunlord SWPA4030S", "SWPA4030S inductor"]

[[presets]]
id = "SWPA5012S"
title = "SWPA5012S wire-wound power inductor, 5 x 5 x 1.2 mm"
params = { series = "SWPA5012S" }
aliases = ["Sunlord SWPA5012S", "SWPA5012S inductor"]

[[presets]]
id = "SWPA5020S"
title = "SWPA5020S wire-wound power inductor, 5 x 5 x 2 mm"
params = { series = "SWPA5020S" }
aliases = ["Sunlord SWPA5020S", "SWPA5020S inductor"]

[[presets]]
id = "SWPA5040S"
title = "SWPA5040S wire-wound power inductor, 5 x 5 x 4 mm"
params = { series = "SWPA5040S" }
aliases = ["Sunlord SWPA5040S", "SWPA5040S inductor"]

[[presets]]
id = "SWPA6020S"
title = "SWPA6020S wire-wound power inductor, 6 x 6 x 2 mm"
params = { series = "SWPA6020S" }
aliases = ["Sunlord SWPA6020S", "SWPA6020S inductor"]

[[presets]]
id = "SWPA6028S"
title = "SWPA6028S wire-wound power inductor, 6 x 6 x 2.8 mm"
params = { series = "SWPA6028S" }
aliases = ["Sunlord SWPA6028S", "SWPA6028S inductor"]

[[presets]]
id = "SWPA6040S"
title = "SWPA6040S wire-wound power inductor, 6 x 6 x 4 mm"
params = { series = "SWPA6040S" }
aliases = ["Sunlord SWPA6040S", "SWPA6040S inductor"]

[[presets]]
id = "SWPA6045S"
title = "SWPA6045S wire-wound power inductor, 6 x 6 x 4.5 mm"
params = { series = "SWPA6045S" }
aliases = ["Sunlord SWPA6045S", "SWPA6045S inductor"]

[[presets]]
id = "SWPA8040S"
title = "SWPA8040S wire-wound power inductor, 8 x 8 x 4.2 mm"
params = { series = "SWPA8040S" }
aliases = ["Sunlord SWPA8040S", "SWPA8040S inductor"]

[[presets]]
id = "SWPA5045S"
title = "SWPA5045S wire-wound power inductor, 5 x 5 x 4.5 mm"
params = { series = "SWPA5045S" }
aliases = ["Sunlord SWPA5045S", "SWPA5045S inductor"]

[[presets]]
id = "SWPA8050S"
title = "SWPA8050S wire-wound power inductor, 8 x 8 x 5 mm"
params = { series = "SWPA8050S" }
aliases = ["Sunlord SWPA8050S", "SWPA8050S inductor"]

[[presets]]
id = "SWPA8060S"
title = "SWPA8060S wire-wound power inductor, 8 x 8 x 6 mm"
params = { series = "SWPA8060S" }
aliases = ["Sunlord SWPA8060S", "SWPA8060S inductor"]

[[presets]]
id = "SWPA8065S"
title = "SWPA8065S wire-wound power inductor, 8 x 8 x 6.5 mm"
params = { series = "SWPA8065S" }
aliases = ["Sunlord SWPA8065S", "SWPA8065S inductor"]

README.md 14 lines · Markdown

Download

Wire-wound power inductor

Wire-wound shielded SMD power inductors in the Sunlord SWPA sizes: the body and the two terminals underneath. The inductor is centred on the origin, sitting on the XY plane, with the terminals on the -X and +X sides. Inductance doesn't change the outside.

Source

Sunlord, "Wire Wound SMD Power Inductors – SWPA Series", revised 2019/04/01: Shape and Dimensions table (page 2). The copy read is the one LCSC hosts, https://atta.szlcsc.com/upload/public/pdf/source/20260722/2E1AF3DDC73E718387934E6B7AB7AF01.pdf.

The table gives, per size, A (along the terminals' spacing), B, the maximum height C, and the terminals' length D, width E and gap F, each nominal ± tolerance. The model uses the middle of each range, and the height is the maximum, so read it as an envelope. For SWPA5045S the nominal terminal widths and gap add up to 5.1 mm against a 5.0 mm body; the model stops the terminals at the body's side.

Proportions, for looks only: the terminals' 0.1 mm thickness under the body. The datasheet draws three outlines (notched corners for most sizes, rounded for 5012 to 5045 and 8050 to 8065); the model is a plain block for all of them. Recommended land pattern sizes aren't modelled.

Sunlord's MWSA molded inductors are the molded-power-inductor part. Other series aren't here yet; see COVERAGE.md.

# Wire-wound power inductor

Wire-wound shielded SMD power inductors in the Sunlord SWPA sizes: the body and the two terminals underneath. The inductor is centred on the origin, sitting on the XY plane, with the terminals on the -X and +X sides. Inductance doesn't change the outside.

## Source

Sunlord, "Wire Wound SMD Power Inductors – SWPA Series", revised 2019/04/01: Shape and Dimensions table (page 2). The copy read is the one LCSC hosts, `https://atta.szlcsc.com/upload/public/pdf/source/20260722/2E1AF3DDC73E718387934E6B7AB7AF01.pdf`.

The table gives, per size, A (along the terminals' spacing), B, the maximum height C, and the terminals' length D, width E and gap F, each nominal ± tolerance. The model uses the middle of each range, and the height is the maximum, so read it as an envelope. For SWPA5045S the nominal terminal widths and gap add up to 5.1 mm against a 5.0 mm body; the model stops the terminals at the body's side.

**Proportions, for looks only:** the terminals' 0.1 mm thickness under the body. The datasheet draws three outlines (notched corners for most sizes, rounded for 5012 to 5045 and 8050 to 8065); the model is a plain block for all of them. Recommended land pattern sizes aren't modelled.

Sunlord's MWSA molded inductors are the `molded-power-inductor` part. Other series aren't here yet; see `COVERAGE.md`.

Use this part

STEVE

Open in STEVE

Open it in STEVE The STEVE runtime runs in STEVE: open the part there, or download the code and bundle.

Get the code

curl -o part.py "https://pythonparts.org/p/steve/wirewound-power-inductor/v/1.0.0/raw/part.py"

Raw files, bundle and API

part.py
pypart.toml
README.md
bundle.tar.gzthe package, as published

curl "https://pythonparts.org/api/v1/parts/steve/wirewound-power-inductor/1.0.0"

The version's JSON (parameters, presets, files); add /build?name=value for a build at other values.

About this part

steve105 parts

Profile

PLAPlastics · Custom finish · 1.24 g/cm³

Mass: 0.058 g

At the parameters shown in the viewer.

License: MIT

Permissive: use, change and sell it; keep the copyright notice.

Runtime: STEVE
Requirements: None stated in the code
Built with: CadQuery 2.9.0.dev0
Published: Nov 5, 2026
Downloads: 0
Builds: 0
Stars: 0
Bundle: 5b672e94a5e7…

#inductor #power-inductor #wire-wound #shielded #smd #electronics

Checks

PassedImports: steve

Every published part passes our checks before it’s listed. It is still code: read it before you use it.

Request a removal A copyright notice, or a trademark, confidential design, safety, malicious code or other problem. Report an illegal or prohibited item

Wire-wound shielded SMD power inductors for board layouts: body and the two bottom terminals, sized from Sunlord's SWPA datasheet table. See the README.

Wire-wound power inductor

Source

Sunlord's MWSA molded inductors are the molded-power-inductor part. Other series aren't here yet; see COVERAGE.md.

1.0.0 Latest Nov 5, 2026 · 2 hours ago

More #inductor

STEVEMIT

steve/alloy-power-inductor

Shielded metal-alloy SMD power inductors in the Würth WE-MAPI sizes, 2.0 x 1.6 mm to 4.1 x 4.1 mm, by the maker's datasheets.

0 10 sizes 0 2 hours ago v1.0.0

STEVEMIT

steve/high-current-inductor

Shielded high-current SMD power inductors in the Würth WE-HCI sizes, 5.3 x 5.6 mm to 22 x 22.5 mm, by the maker's datasheets.

0 8 sizes 0 2 hours ago v1.0.0

STEVEMIT

steve/flat-wire-inductor

Shielded SMD flat-wire high-current inductors in the Würth WE-HCM sizes, 7 x 7 mm to 13.3 x 13.5 mm, by the maker's datasheets.

0 9 sizes 0 1 hour ago v1.0.0

STEVEMIT

steve/molded-chip-inductor

Power molded chip inductors in the Würth WE-PMCI sizes, 1.6 x 0.8 mm to 3.2 x 2.5 mm, by the maker's datasheets.

0 7 sizes 0 1 hour ago v1.0.0

steve/wirewound-power-inductor

Wire-wound power inductor

Source

Wire-wound power inductor

Source

Related parts

steve/alloy-power-inductor

steve/high-current-inductor

steve/flat-wire-inductor

steve/molded-chip-inductor