STEVEMIT
steve/extrusion-corner-bracket
Corner bracket envelope for 2020, 3030 and 4040 extrusions: two flat legs at a right angle (simplified, no holes).
steve/t-slot-extrusion
T-slot aluminium extrusions with real cross-sections (2020, 2040, 3030, 3060, 4040, 4080; slot 5, 6, 8), any length.
Not affiliated with or endorsed by MISUMI.
Isometric
Section analysis
Plane normal
Offset
| 1 | """T-slot aluminium extrusion profiles, any length: the real cross-sections of nine common 20, 30 and 40 mm series |
| 2 | profiles (B-type slot 6/8, I-type slot 5/8, item-compatible, Misumi HFS6), measured from published FreeCAD-library models. |
| 3 | |
| 4 | The section, centred on the origin in the XY plane (the longer side along Y), is extruded along +Z by `length`. Each |
| 5 | section is the reference model's own outline at mid-length: lines and arcs (each arc given by its midpoint), loops in |
| 6 | order, the first the outside and the rest the cavities and bores. See the README for the models and their authors. |
| 7 | """ |
| 8 | import cadquery as cq |
| 9 | |
| 10 | from steve import Model |
| 11 | |
| 12 | profile = "2020-B6" # Profile |
| 13 | length = 100 # mm Length |
| 14 | finish = "clear" # Anodising |
| 15 | |
| 16 | # mm. Measured on each reference model's cross-section at mid-length (OCCT section of the STEP model, every edge read |
| 17 | # exactly: line ends, and each arc's ends and midpoint), centred on the section's bounding box, rounded to 1e-4 mm. |
| 18 | # A loop: x0, y0, then ("L", x, y) a line to, ("A", xm, ym, x, y) an arc through (xm, ym) to; ("C", cx, cy, r) a circle. |
| 19 | # The 4080L model's eight spline edges (slot entry rounds) are drawn as 16 chords each (within 0.01 mm). |
| 20 | PROFILES = { |
| 21 | # 2020-B6: FreeCAD-library "Profile-20x20-B-Type_Slot6_A.step" (mathis (Int-Circuit), CC-BY-3.0), |
| 22 | # step.parts profile_2020_b_slot6_a: section 20 x 20, |
| 23 | # area 174.3364 mm^2 on the model |
| 24 | "2020-B6": [ |
| 25 | [10.0, 9.0, ('L', 10.0, 3.4), ('L', 9.6, 3.4), ('L', 9.6, 3.0), ('L', 8.5, 3.0), ('L', 8.5, 6.0), |
| 26 | ('L', 7.0, 6.0), ('L', 4.7, 3.35), ('L', 4.7, 0.65), ('L', 4.3, 0.0), ('L', 4.7, -0.65), ('L', 4.7, -3.35), |
| 27 | ('L', 7.0, -6.0), ('L', 8.5, -6.0), ('L', 8.5, -3.0), ('L', 9.6, -3.0), ('L', 9.6, -3.4), ('L', 10.0, -3.4), |
| 28 | ('L', 10.0, -9.0), ('A', 9.7071, -9.7071, 9.0, -10.0), ('L', 3.4, -10.0), ('L', 3.4, -9.6), ('L', 3.0, -9.6), |
| 29 | ('L', 3.0, -8.5), ('L', 6.0, -8.5), ('L', 6.0, -7.0), ('L', 3.35, -4.7), ('L', 0.65, -4.7), ('L', 0.0, -4.3), |
| 30 | ('L', -0.65, -4.7), ('L', -3.35, -4.7), ('L', -6.0, -7.0), ('L', -6.0, -8.5), ('L', -3.0, -8.5), |
| 31 | ('L', -3.0, -9.6), ('L', -3.4, -9.6), ('L', -3.4, -10.0), ('L', -9.0, -10.0), |
| 32 | ('A', -9.7071, -9.7071, -10.0, -9.0), ('L', -10.0, -3.4), ('L', -9.6, -3.4), ('L', -9.6, -3.0), |
| 33 | ('L', -8.5, -3.0), ('L', -8.5, -6.0), ('L', -7.0, -6.0), ('L', -4.7, -3.35), ('L', -4.7, -0.65), |
| 34 | ('L', -4.3, 0.0), ('L', -4.7, 0.65), ('L', -4.7, 3.35), ('L', -7.0, 6.0), ('L', -8.5, 6.0), ('L', -8.5, 3.0), |
| 35 | ('L', -9.6, 3.0), ('L', -9.6, 3.4), ('L', -10.0, 3.4), ('L', -10.0, 9.0), ('A', -9.7071, 9.7071, -9.0, 10.0), |
| 36 | ('L', -3.4, 10.0), ('L', -3.4, 9.6), ('L', -3.0, 9.6), ('L', -3.0, 8.5), ('L', -6.0, 8.5), ('L', -6.0, 7.0), |
| 37 | ('L', -3.35, 4.7), ('L', -0.65, 4.7), ('L', 0.0, 4.3), ('L', 0.65, 4.7), ('L', 3.35, 4.7), ('L', 6.0, 7.0), |
| 38 | ('L', 6.0, 8.5), ('L', 3.0, 8.5), ('L', 3.0, 9.6), ('L', 3.4, 9.6), ('L', 3.4, 10.0), ('L', 9.0, 10.0), |
| 39 | ('A', 9.7071, 9.7071, 10.0, 9.0)], |
| 40 | [1.3405, 2.4012, ('A', 0.6926, 2.6614, 0.0, 2.75), ('A', -0.6926, 2.6614, -1.3405, 2.4012), |
| 41 | ('L', -1.9445, 3.0052), ('L', -2.4749, 2.4749), ('L', -3.0052, 1.9445), ('L', -2.4012, 1.3405), |
| 42 | ('A', -2.6614, 0.6926, -2.75, 0.0), ('A', -2.6614, -0.6926, -2.4012, -1.3405), ('L', -3.0052, -1.9445), |
| 43 | ('L', -2.4749, -2.4749), ('L', -1.9445, -3.0052), ('L', -1.3405, -2.4012), |
| 44 | ('A', -0.6926, -2.6614, 0.0, -2.75), ('A', 0.6926, -2.6614, 1.3405, -2.4012), ('L', 1.9445, -3.0052), |
| 45 | ('L', 2.4749, -2.4749), ('L', 3.0052, -1.9445), ('L', 2.4012, -1.3405), ('A', 2.6614, -0.6926, 2.75, 0.0), |
| 46 | ('A', 2.6614, 0.6926, 2.4012, 1.3405), ('L', 3.0052, 1.9445), ('L', 2.4749, 2.4749), ('L', 1.9445, 3.0052), |
| 47 | ('L', 1.3405, 2.4012)], |
| 48 | ], |
| 49 | # 2020-I5: FreeCAD-library "Profile-20x20-I-Type_Slot5.step" (mathis (Int-Circuit), CC-BY-3.0), |
| 50 | # step.parts profile_2020_i_slot5: section 20 x 20, |
| 51 | # area 171.991 mm^2 on the model |
| 52 | "2020-I5": [ |
| 53 | [5.3295, -8.2, ('L', 3.1595, -8.2), ('A', 2.9473, -8.2879, 2.8595, -8.5), ('L', 2.8595, -9.2), |
| 54 | ('A', 3.0938, -9.7657, 3.6595, -10.0), ('L', 8.2895, -10.0), ('A', 9.499, -9.499, 10.0, -8.2895), |
| 55 | ('L', 10.0, -3.6595), ('A', 9.7657, -3.0938, 9.2, -2.8595), ('L', 8.5, -2.8595), |
| 56 | ('A', 8.2879, -2.9473, 8.2, -3.1595), ('L', 8.2, -5.3295), ('A', 7.7138, -6.0446, 6.87, -5.8555), |
| 57 | ('L', 4.53, -3.36), ('A', 3.878, -2.3314, 3.65, -1.135), ('L', 3.65, 0.0), ('L', 3.65, 1.135), |
| 58 | ('A', 3.878, 2.3314, 4.53, 3.36), ('L', 6.87, 5.8555), ('A', 7.7138, 6.0446, 8.2, 5.3295), |
| 59 | ('L', 8.2, 3.1595), ('A', 8.2879, 2.9473, 8.5, 2.8595), ('L', 9.2, 2.8595), |
| 60 | ('A', 9.7657, 3.0938, 10.0, 3.6595), ('L', 10.0, 8.2895), ('A', 9.499, 9.499, 8.2895, 10.0), |
| 61 | ('L', 3.6595, 10.0), ('A', 3.0938, 9.7657, 2.8595, 9.2), ('L', 2.8595, 8.5), |
| 62 | ('A', 2.9473, 8.2879, 3.1595, 8.2), ('L', 5.3295, 8.2), ('A', 6.0446, 7.7138, 5.8555, 6.87), |
| 63 | ('L', 3.36, 4.53), ('A', 2.3314, 3.878, 1.135, 3.65), ('L', 0.0, 3.65), ('L', -1.135, 3.65), |
| 64 | ('A', -2.3314, 3.878, -3.36, 4.53), ('L', -5.8555, 6.87), ('A', -6.0446, 7.7138, -5.3295, 8.2), |
| 65 | ('L', -3.1595, 8.2), ('A', -2.9473, 8.2879, -2.8595, 8.5), ('L', -2.8595, 9.2), |
| 66 | ('A', -3.0938, 9.7657, -3.6595, 10.0), ('L', -8.2895, 10.0), ('A', -9.499, 9.499, -10.0, 8.2895), |
| 67 | ('L', -10.0, 3.6595), ('A', -9.7657, 3.0938, -9.2, 2.8595), ('L', -8.5, 2.8595), |
| 68 | ('A', -8.2879, 2.9473, -8.2, 3.1595), ('L', -8.2, 5.3295), ('A', -7.7138, 6.0446, -6.87, 5.8555), |
| 69 | ('L', -4.53, 3.36), ('A', -3.878, 2.3314, -3.65, 1.135), ('L', -3.65, 0.0), ('L', -3.65, -1.135), |
| 70 | ('A', -3.878, -2.3314, -4.53, -3.36), ('L', -6.87, -5.8555), ('A', -7.7138, -6.0446, -8.2, -5.3295), |
| 71 | ('L', -8.2, -3.1595), ('A', -8.2879, -2.9473, -8.5, -2.8595), ('L', -9.2, -2.8595), |
| 72 | ('A', -9.7657, -3.0938, -10.0, -3.6595), ('L', -10.0, -8.2895), ('A', -9.499, -9.499, -8.2895, -10.0), |
| 73 | ('L', -3.6595, -10.0), ('A', -3.0938, -9.7657, -2.8595, -9.2), ('L', -2.8595, -8.5), |
| 74 | ('A', -2.9473, -8.2879, -3.1595, -8.2), ('L', -5.3295, -8.2), ('A', -6.0446, -7.7138, -5.8555, -6.87), |
| 75 | ('L', -3.36, -4.53), ('A', -2.3314, -3.878, -1.135, -3.65), ('L', 0.0, -3.65), ('L', 1.135, -3.65), |
| 76 | ('A', 2.3314, -3.878, 3.36, -4.53), ('L', 5.8555, -6.87), ('A', 6.0446, -7.7138, 5.3295, -8.2)], |
| 77 | [0.0, 2.15, ('A', 1.5203, 1.5203, 2.15, 0.0), ('A', 1.5203, -1.5203, 0.0, -2.15), |
| 78 | ('A', -1.5203, -1.5203, -2.15, 0.0), ('A', -1.5203, 1.5203, 0.0, 2.15)], |
| 79 | ], |
| 80 | # 2020-I5-ISP: FreeCAD-library "Profile_20x20_I_Type_Slot5.stp" (Stefan Katerkamp, CC-BY-3.0), |
| 81 | # step.parts profile_2020_i_slot5_item_compatible_l50: section 20 x 20, |
| 82 | # area 181.6955 mm^2 on the model |
| 83 | "2020-I5-ISP": [ |
| 84 | [0.0, 3.45, ('L', -0.1772, 3.65), ('L', -2.3772, 3.65), ('L', -5.6469, 6.9197), |
| 85 | ('A', -5.8095, 7.737, -5.1165, 8.2), ('L', -2.5, 8.2), ('L', -2.5, 9.5), ('A', -2.6464, 9.8536, -3.0, 10.0), |
| 86 | ('L', -8.0, 10.0), ('A', -9.4142, 9.4142, -10.0, 8.0), ('L', -10.0, 3.0), ('A', -9.8536, 2.6464, -9.5, 2.5), |
| 87 | ('L', -8.2, 2.5), ('L', -8.2, 5.1165), ('A', -7.737, 5.8095, -6.9197, 5.6469), ('L', -3.65, 2.3772), |
| 88 | ('L', -3.65, 0.1772), ('L', -3.45, 0.0), ('L', -3.65, -0.1772), ('L', -3.65, -2.3772), |
| 89 | ('L', -6.9197, -5.6469), ('A', -7.737, -5.8095, -8.2, -5.1165), ('L', -8.2, -2.5), ('L', -9.5, -2.5), |
| 90 | ('A', -9.8536, -2.6464, -10.0, -3.0), ('L', -10.0, -8.0), ('A', -9.4142, -9.4142, -8.0, -10.0), |
| 91 | ('L', -3.0, -10.0), ('A', -2.6464, -9.8536, -2.5, -9.5), ('L', -2.5, -8.2), ('L', -5.1165, -8.2), |
| 92 | ('A', -5.8095, -7.737, -5.6469, -6.9197), ('L', -2.3772, -3.65), ('L', -0.1772, -3.65), ('L', 0.0, -3.45), |
| 93 | ('L', 0.1772, -3.65), ('L', 2.3772, -3.65), ('L', 5.6469, -6.9197), ('A', 5.8095, -7.737, 5.1165, -8.2), |
| 94 | ('L', 2.5, -8.2), ('L', 2.5, -9.5), ('A', 2.6464, -9.8536, 3.0, -10.0), ('L', 8.0, -10.0), |
| 95 | ('A', 9.4142, -9.4142, 10.0, -8.0), ('L', 10.0, -3.0), ('A', 9.8536, -2.6464, 9.5, -2.5), ('L', 8.2, -2.5), |
| 96 | ('L', 8.2, -5.1165), ('A', 7.737, -5.8095, 6.9197, -5.6469), ('L', 3.65, -2.3772), ('L', 3.65, -0.1772), |
| 97 | ('L', 3.45, 0.0), ('L', 3.65, 0.1772), ('L', 3.65, 2.3772), ('L', 6.9197, 5.6469), |
| 98 | ('A', 7.737, 5.8095, 8.2, 5.1165), ('L', 8.2, 2.5), ('L', 9.5, 2.5), ('A', 9.8536, 2.6464, 10.0, 3.0), |
| 99 | ('L', 10.0, 8.0), ('A', 9.4142, 9.4142, 8.0, 10.0), ('L', 3.0, 10.0), ('A', 2.6464, 9.8536, 2.5, 9.5), |
| 100 | ('L', 2.5, 8.2), ('L', 5.1165, 8.2), ('A', 5.8095, 7.737, 5.6469, 6.9197), ('L', 2.3772, 3.65), |
| 101 | ('L', 0.1772, 3.65), ('L', 0.0, 3.45)], |
| 102 | [-2.15, 0.0, ('A', -1.5203, 1.5203, 0.0, 2.15), ('A', 1.5203, 1.5203, 2.15, 0.0), |
| 103 | ('A', 1.5203, -1.5203, 0.0, -2.15), ('A', -1.5203, -1.5203, -2.15, 0.0)], |
| 104 | ], |
| 105 | # 2040-B6: FreeCAD-library "Profile-20x40-B-Type_Slot6.step" (mathis (Int-Circuit), CC-BY-3.0), |
| 106 | # step.parts profile_2040_b_slot6: section 20 x 40, |
| 107 | # area 286.7288 mm^2 on the model |
| 108 | "2040-B6": [ |
| 109 | [-10.0, -13.7, ('L', -10.0, -18.5), ('A', -9.5607, -19.5607, -8.5, -20.0), ('L', -3.7, -20.0), |
| 110 | ('A', -3.5586, -19.9414, -3.5, -19.8), ('L', -3.5, -19.5), ('L', -3.2, -19.5), |
| 111 | ('A', -3.0586, -19.4414, -3.0, -19.3), ('L', -3.0, -19.0), ('A', -3.1464, -18.6464, -3.5, -18.5), |
| 112 | ('L', -5.5, -18.5), ('A', -5.8536, -18.3536, -6.0, -18.0), ('L', -6.0, -17.27), |
| 113 | ('A', -5.9619, -17.0787, -5.8536, -16.9164), ('L', -3.5836, -14.6464), |
| 114 | ('A', -3.4213, -14.5381, -3.23, -14.5), ('L', -0.955, -14.5), ('A', -0.9032, -14.4932, -0.8549, -14.4732), |
| 115 | ('L', -0.1001, -14.0368), ('A', 0.0, -14.01, 0.1001, -14.0368), ('L', 0.8549, -14.4732), |
| 116 | ('A', 0.9032, -14.4932, 0.955, -14.5), ('L', 3.23, -14.5), ('A', 3.4213, -14.5381, 3.5836, -14.6464), |
| 117 | ('L', 5.8536, -16.9164), ('A', 5.9619, -17.0787, 6.0, -17.27), ('L', 6.0, -18.0), |
| 118 | ('A', 5.8536, -18.3536, 5.5, -18.5), ('L', 3.5, -18.5), ('A', 3.1464, -18.6464, 3.0, -19.0), |
| 119 | ('L', 3.0, -19.3), ('A', 3.0586, -19.4414, 3.2, -19.5), ('L', 3.5, -19.5), ('L', 3.5, -19.8), |
| 120 | ('A', 3.5586, -19.9414, 3.7, -20.0), ('L', 8.5, -20.0), ('A', 9.5607, -19.5607, 10.0, -18.5), |
| 121 | ('L', 10.0, -13.7), ('A', 9.9414, -13.5586, 9.8, -13.5), ('L', 9.5, -13.5), ('L', 9.5, -13.2), |
| 122 | ('A', 9.4414, -13.0586, 9.3, -13.0), ('L', 9.0, -13.0), ('A', 8.6464, -13.1464, 8.5, -13.5), |
| 123 | ('L', 8.5, -15.5), ('A', 8.3536, -15.8536, 8.0, -16.0), ('L', 7.27, -16.0), |
| 124 | ('A', 7.0787, -15.9619, 6.9164, -15.8536), ('L', 4.6464, -13.5836), ('A', 4.5381, -13.4213, 4.5, -13.23), |
| 125 | ('L', 4.5, -10.955), ('A', 4.4932, -10.9032, 4.4732, -10.8549), ('L', 4.0368, -10.1001), |
| 126 | ('A', 4.01, -10.0, 4.0368, -9.8999), ('L', 4.4732, -9.1451), ('A', 4.4932, -9.0968, 4.5, -9.045), |
| 127 | ('L', 4.5, -6.77), ('A', 4.5381, -6.5787, 4.6464, -6.4164), ('L', 6.9164, -4.1464), |
| 128 | ('A', 7.0787, -4.0381, 7.27, -4.0), ('L', 8.0, -4.0), ('A', 8.3536, -4.1464, 8.5, -4.5), ('L', 8.5, -6.5), |
| 129 | ('A', 8.6464, -6.8536, 9.0, -7.0), ('L', 9.3, -7.0), ('A', 9.4414, -6.9414, 9.5, -6.8), ('L', 9.5, -6.5), |
| 130 | ('L', 9.8, -6.5), ('A', 9.9414, -6.4414, 10.0, -6.3), ('L', 10.0, 6.3), ('A', 9.9414, 6.4414, 9.8, 6.5), |
| 131 | ('L', 9.5, 6.5), ('L', 9.5, 6.8), ('A', 9.4414, 6.9414, 9.3, 7.0), ('L', 9.0, 7.0), |
| 132 | ('A', 8.6464, 6.8536, 8.5, 6.5), ('L', 8.5, 4.5), ('A', 8.3536, 4.1464, 8.0, 4.0), ('L', 7.27, 4.0), |
| 133 | ('A', 7.0787, 4.0381, 6.9164, 4.1464), ('L', 4.6464, 6.4164), ('A', 4.5381, 6.5787, 4.5, 6.77), |
| 134 | ('L', 4.5, 9.045), ('A', 4.4932, 9.0968, 4.4732, 9.1451), ('L', 4.0368, 9.8999), |
| 135 | ('A', 4.01, 10.0, 4.0368, 10.1001), ('L', 4.4732, 10.8549), ('A', 4.4932, 10.9032, 4.5, 10.955), |
| 136 | ('L', 4.5, 13.23), ('A', 4.5381, 13.4213, 4.6464, 13.5836), ('L', 6.9164, 15.8536), |
| 137 | ('A', 7.0787, 15.9619, 7.27, 16.0), ('L', 8.0, 16.0), ('A', 8.3536, 15.8536, 8.5, 15.5), ('L', 8.5, 13.5), |
| 138 | ('A', 8.6464, 13.1464, 9.0, 13.0), ('L', 9.3, 13.0), ('A', 9.4414, 13.0586, 9.5, 13.2), ('L', 9.5, 13.5), |
| 139 | ('L', 9.8, 13.5), ('A', 9.9414, 13.5586, 10.0, 13.7), ('L', 10.0, 18.5), ('A', 9.5607, 19.5607, 8.5, 20.0), |
| 140 | ('L', 3.7, 20.0), ('A', 3.5586, 19.9414, 3.5, 19.8), ('L', 3.5, 19.5), ('L', 3.2, 19.5), |
| 141 | ('A', 3.0586, 19.4414, 3.0, 19.3), ('L', 3.0, 19.0), ('A', 3.1464, 18.6464, 3.5, 18.5), ('L', 5.5, 18.5), |
| 142 | ('A', 5.8536, 18.3536, 6.0, 18.0), ('L', 6.0, 17.27), ('A', 5.9619, 17.0787, 5.8536, 16.9164), |
| 143 | ('L', 3.5836, 14.6464), ('A', 3.4213, 14.5381, 3.23, 14.5), ('L', 0.955, 14.5), |
| 144 | ('A', 0.9032, 14.4932, 0.8549, 14.4732), ('L', 0.1001, 14.0368), ('A', 0.0, 14.01, -0.1001, 14.0368), |
| 145 | ('L', -0.8549, 14.4732), ('A', -0.9032, 14.4932, -0.955, 14.5), ('L', -3.23, 14.5), |
| 146 | ('A', -3.4213, 14.5381, -3.5836, 14.6464), ('L', -5.8536, 16.9164), ('A', -5.9619, 17.0787, -6.0, 17.27), |
| 147 | ('L', -6.0, 18.0), ('A', -5.8536, 18.3536, -5.5, 18.5), ('L', -3.5, 18.5), |
| 148 | ('A', -3.1464, 18.6464, -3.0, 19.0), ('L', -3.0, 19.3), ('A', -3.0586, 19.4414, -3.2, 19.5), |
| 149 | ('L', -3.5, 19.5), ('L', -3.5, 19.8), ('A', -3.5586, 19.9414, -3.7, 20.0), ('L', -8.5, 20.0), |
| 150 | ('A', -9.5607, 19.5607, -10.0, 18.5), ('L', -10.0, 13.7), ('A', -9.9414, 13.5586, -9.8, 13.5), |
| 151 | ('L', -9.5, 13.5), ('L', -9.5, 13.2), ('A', -9.4414, 13.0586, -9.3, 13.0), ('L', -9.0, 13.0), |
| 152 | ('A', -8.6464, 13.1464, -8.5, 13.5), ('L', -8.5, 15.5), ('A', -8.3536, 15.8536, -8.0, 16.0), |
| 153 | ('L', -7.27, 16.0), ('A', -7.0787, 15.9619, -6.9164, 15.8536), ('L', -4.6464, 13.5836), |
| 154 | ('A', -4.5381, 13.4213, -4.5, 13.23), ('L', -4.5, 10.955), ('A', -4.4932, 10.9032, -4.4732, 10.8549), |
| 155 | ('L', -4.0368, 10.1001), ('A', -4.01, 10.0, -4.0368, 9.8999), ('L', -4.4732, 9.1451), |
| 156 | ('A', -4.4932, 9.0968, -4.5, 9.045), ('L', -4.5, 6.77), ('A', -4.5381, 6.5787, -4.6464, 6.4164), |
| 157 | ('L', -6.9164, 4.1464), ('A', -7.0787, 4.0381, -7.27, 4.0), ('L', -8.0, 4.0), |
| 158 | ('A', -8.3536, 4.1464, -8.5, 4.5), ('L', -8.5, 6.5), ('A', -8.6464, 6.8536, -9.0, 7.0), ('L', -9.3, 7.0), |
| 159 | ('A', -9.4414, 6.9414, -9.5, 6.8), ('L', -9.5, 6.5), ('L', -9.8, 6.5), ('A', -9.9414, 6.4414, -10.0, 6.3), |
| 160 | ('L', -10.0, -6.3), ('A', -9.9414, -6.4414, -9.8, -6.5), ('L', -9.5, -6.5), ('L', -9.5, -6.8), |
| 161 | ('A', -9.4414, -6.9414, -9.3, -7.0), ('L', -9.0, -7.0), ('A', -8.6464, -6.8536, -8.5, -6.5), |
| 162 | ('L', -8.5, -4.5), ('A', -8.3536, -4.1464, -8.0, -4.0), ('L', -7.27, -4.0), |
| 163 | ('A', -7.0787, -4.0381, -6.9164, -4.1464), ('L', -4.6464, -6.4164), ('A', -4.5381, -6.5787, -4.5, -6.77), |
| 164 | ('L', -4.5, -9.045), ('A', -4.4932, -9.0968, -4.4732, -9.1451), ('L', -4.0368, -9.8999), |
| 165 | ('A', -4.01, -10.0, -4.0368, -10.1001), ('L', -4.4732, -10.8549), ('A', -4.4932, -10.9032, -4.5, -10.955), |
| 166 | ('L', -4.5, -13.23), ('A', -4.5381, -13.4213, -4.6464, -13.5836), ('L', -6.9164, -15.8536), |
| 167 | ('A', -7.0787, -15.9619, -7.27, -16.0), ('L', -8.0, -16.0), ('A', -8.3536, -15.8536, -8.5, -15.5), |
| 168 | ('L', -8.5, -13.5), ('A', -8.6464, -13.1464, -9.0, -13.0), ('L', -9.3, -13.0), |
| 169 | ('A', -9.4414, -13.0586, -9.5, -13.2), ('L', -9.5, -13.5), ('L', -9.8, -13.5), |
| 170 | ('A', -9.9414, -13.5586, -10.0, -13.7)], |
| 171 | [-1.9116, -12.9914, ('A', -2.5102, -12.5102, -2.9914, -11.9116), ('L', -2.4456, -11.2576), |
| 172 | ('A', -2.75, -10.0, -2.4456, -8.7424), ('L', -2.9914, -8.0884), ('A', -2.5102, -7.4898, -1.9116, -7.0086), |
| 173 | ('L', -1.2576, -7.5544), ('A', 0.0, -7.25, 1.2576, -7.5544), ('L', 1.9116, -7.0086), |
| 174 | ('A', 2.5102, -7.4898, 2.9914, -8.0884), ('L', 2.4456, -8.7424), ('A', 2.75, -10.0, 2.4456, -11.2576), |
| 175 | ('L', 2.9914, -11.9116), ('A', 2.5102, -12.5102, 1.9116, -12.9914), ('L', 1.2576, -12.4456), |
| 176 | ('A', 0.0, -12.75, -1.2576, -12.4456), ('L', -1.9116, -12.9914)], |
| 177 | [6.645, -2.5, ('A', 6.4537, -2.538, 6.2915, -2.6464), ('L', 3.5835, -5.3536), |
| 178 | ('A', 3.4213, -5.462, 3.23, -5.5), ('L', 0.955, -5.5), ('A', 0.9032, -5.5068, 0.8549, -5.5268), |
| 179 | ('L', 0.1001, -5.9632), ('A', 0.0, -5.99, -0.1001, -5.9632), ('L', -0.8549, -5.5268), |
| 180 | ('A', -0.9032, -5.5068, -0.955, -5.5), ('L', -3.23, -5.5), ('A', -3.4213, -5.462, -3.5835, -5.3536), |
| 181 | ('L', -6.2915, -2.6464), ('A', -6.4537, -2.538, -6.645, -2.5), ('L', -8.0, -2.5), |
| 182 | ('A', -8.3536, -2.3536, -8.5, -2.0), ('L', -8.5, 0.0), ('L', -8.5, 2.0), ('A', -8.3536, 2.3536, -8.0, 2.5), |
| 183 | ('L', -6.645, 2.5), ('A', -6.4537, 2.538, -6.2915, 2.6464), ('L', -3.5835, 5.3536), |
| 184 | ('A', -3.4213, 5.462, -3.23, 5.5), ('L', -0.955, 5.5), ('A', -0.9032, 5.5068, -0.8549, 5.5268), |
| 185 | ('L', -0.1001, 5.9632), ('A', 0.0, 5.99, 0.1001, 5.9632), ('L', 0.8549, 5.5268), |
| 186 | ('A', 0.9032, 5.5068, 0.955, 5.5), ('L', 3.23, 5.5), ('A', 3.4213, 5.462, 3.5835, 5.3536), |
| 187 | ('L', 6.2915, 2.6464), ('A', 6.4537, 2.538, 6.645, 2.5), ('L', 8.0, 2.5), ('A', 8.3536, 2.3536, 8.5, 2.0), |
| 188 | ('L', 8.5, 0.0), ('L', 8.5, -2.0), ('A', 8.3536, -2.3536, 8.0, -2.5), ('L', 6.645, -2.5)], |
| 189 | [-2.4456, 11.2576, ('L', -2.9914, 11.9116), ('A', -2.5102, 12.5102, -1.9116, 12.9914), |
| 190 | ('L', -1.2576, 12.4456), ('A', 0.0, 12.75, 1.2576, 12.4456), ('L', 1.9116, 12.9914), |
| 191 | ('A', 2.5102, 12.5102, 2.9914, 11.9116), ('L', 2.4456, 11.2576), ('A', 2.75, 10.0, 2.4456, 8.7424), |
| 192 | ('L', 2.9914, 8.0884), ('A', 2.5102, 7.4898, 1.9116, 7.0086), ('L', 1.2576, 7.5544), |
| 193 | ('A', 0.0, 7.25, -1.2576, 7.5544), ('L', -1.9116, 7.0086), ('A', -2.5102, 7.4898, -2.9914, 8.0884), |
| 194 | ('L', -2.4456, 8.7424), ('A', -2.75, 10.0, -2.4456, 11.2576)], |
| 195 | ], |
| 196 | # 3030-B8: FreeCAD-library "Profile-30x30-B-Type_Slot8.step" (mathis (Int-Circuit), CC-BY-3.0), |
| 197 | # step.parts profile_3030_b_slot8: section 30 x 30, |
| 198 | # area 313.8248 mm^2 on the model |
| 199 | "3030-B8": [ |
| 200 | [-15.0, -4.7, ('L', -15.0, -13.0), ('A', -14.4142, -14.4142, -13.0, -15.0), ('L', -4.7, -15.0), |
| 201 | ('A', -4.5586, -14.9414, -4.5, -14.8), ('L', -4.5, -14.5), ('L', -4.2, -14.5), |
| 202 | ('A', -4.0586, -14.4414, -4.0, -14.3), ('L', -4.0, -13.3), ('A', -4.1464, -12.9464, -4.5, -12.8), |
| 203 | ('L', -7.75, -12.8), ('A', -8.1036, -12.6536, -8.25, -12.3), ('L', -8.25, -10.2534), |
| 204 | ('A', -8.212, -10.0622, -8.1037, -9.9), ('L', -4.3537, -6.1466), ('A', -4.1914, -6.0381, -4.0, -6.0), |
| 205 | ('L', -0.95, -6.0), ('A', -0.8989, -5.9934, -0.8511, -5.9739), ('L', -0.0989, -5.5461), |
| 206 | ('A', 0.0, -5.52, 0.0989, -5.5461), ('L', 0.8511, -5.9739), ('A', 0.8989, -5.9934, 0.95, -6.0), |
| 207 | ('L', 4.0, -6.0), ('A', 4.1914, -6.0381, 4.3537, -6.1466), ('L', 8.1037, -9.9), |
| 208 | ('A', 8.212, -10.0622, 8.25, -10.2534), ('L', 8.25, -12.3), ('A', 8.1036, -12.6536, 7.75, -12.8), |
| 209 | ('L', 4.5, -12.8), ('A', 4.1464, -12.9464, 4.0, -13.3), ('L', 4.0, -14.3), |
| 210 | ('A', 4.0586, -14.4414, 4.2, -14.5), ('L', 4.5, -14.5), ('L', 4.5, -14.8), |
| 211 | ('A', 4.5586, -14.9414, 4.7, -15.0), ('L', 13.0, -15.0), ('A', 14.4142, -14.4142, 15.0, -13.0), |
| 212 | ('L', 15.0, -4.7), ('A', 14.9414, -4.5586, 14.8, -4.5), ('L', 14.5, -4.5), ('L', 14.5, -4.2), |
| 213 | ('A', 14.4414, -4.0586, 14.3, -4.0), ('L', 13.3, -4.0), ('A', 12.9464, -4.1464, 12.8, -4.5), |
| 214 | ('L', 12.8, -7.75), ('A', 12.6536, -8.1036, 12.3, -8.25), ('L', 10.2534, -8.25), |
| 215 | ('A', 10.0622, -8.212, 9.9, -8.1037), ('L', 6.1466, -4.3537), ('A', 6.0381, -4.1914, 6.0, -4.0), |
| 216 | ('L', 6.0, -0.95), ('A', 5.9934, -0.8989, 5.9739, -0.8511), ('L', 5.5461, -0.0989), |
| 217 | ('A', 5.52, 0.0, 5.5461, 0.0989), ('L', 5.9739, 0.8511), ('A', 5.9934, 0.8989, 6.0, 0.95), ('L', 6.0, 4.0), |
| 218 | ('A', 6.0381, 4.1914, 6.1466, 4.3537), ('L', 9.9, 8.1037), ('A', 10.0622, 8.212, 10.2534, 8.25), |
| 219 | ('L', 12.3, 8.25), ('A', 12.6536, 8.1036, 12.8, 7.75), ('L', 12.8, 4.5), ('A', 12.9464, 4.1464, 13.3, 4.0), |
| 220 | ('L', 14.3, 4.0), ('A', 14.4414, 4.0586, 14.5, 4.2), ('L', 14.5, 4.5), ('L', 14.8, 4.5), |
| 221 | ('A', 14.9414, 4.5586, 15.0, 4.7), ('L', 15.0, 13.0), ('A', 14.4142, 14.4142, 13.0, 15.0), ('L', 4.7, 15.0), |
| 222 | ('A', 4.5586, 14.9414, 4.5, 14.8), ('L', 4.5, 14.5), ('L', 4.2, 14.5), ('A', 4.0586, 14.4414, 4.0, 14.3), |
| 223 | ('L', 4.0, 13.3), ('A', 4.1464, 12.9464, 4.5, 12.8), ('L', 7.75, 12.8), ('A', 8.1036, 12.6536, 8.25, 12.3), |
| 224 | ('L', 8.25, 10.2534), ('A', 8.212, 10.0622, 8.1037, 9.9), ('L', 4.3537, 6.1466), |
| 225 | ('A', 4.1914, 6.0381, 4.0, 6.0), ('L', 0.95, 6.0), ('A', 0.8989, 5.9934, 0.8511, 5.9739), |
| 226 | ('L', 0.0989, 5.5461), ('A', 0.0, 5.52, -0.0989, 5.5461), ('L', -0.8511, 5.9739), |
| 227 | ('A', -0.8989, 5.9934, -0.95, 6.0), ('L', -4.0, 6.0), ('A', -4.1914, 6.0381, -4.3537, 6.1466), |
| 228 | ('L', -8.1037, 9.9), ('A', -8.212, 10.0622, -8.25, 10.2534), ('L', -8.25, 12.3), |
| 229 | ('A', -8.1036, 12.6536, -7.75, 12.8), ('L', -4.5, 12.8), ('A', -4.1464, 12.9464, -4.0, 13.3), |
| 230 | ('L', -4.0, 14.3), ('A', -4.0586, 14.4414, -4.2, 14.5), ('L', -4.5, 14.5), ('L', -4.5, 14.8), |
| 231 | ('A', -4.5586, 14.9414, -4.7, 15.0), ('L', -13.0, 15.0), ('A', -14.4142, 14.4142, -15.0, 13.0), |
| 232 | ('L', -15.0, 4.7), ('A', -14.9414, 4.5586, -14.8, 4.5), ('L', -14.5, 4.5), ('L', -14.5, 4.2), |
| 233 | ('A', -14.4414, 4.0586, -14.3, 4.0), ('L', -13.3, 4.0), ('A', -12.9464, 4.1464, -12.8, 4.5), |
| 234 | ('L', -12.8, 7.75), ('A', -12.6536, 8.1036, -12.3, 8.25), ('L', -10.2534, 8.25), |
| 235 | ('A', -10.0622, 8.212, -9.9, 8.1037), ('L', -6.1466, 4.3537), ('A', -6.0381, 4.1914, -6.0, 4.0), |
| 236 | ('L', -6.0, 0.95), ('A', -5.9934, 0.8989, -5.9739, 0.8511), ('L', -5.5461, 0.0989), |
| 237 | ('A', -5.52, 0.0, -5.5461, -0.0989), ('L', -5.9739, -0.8511), ('A', -5.9934, -0.8989, -6.0, -0.95), |
| 238 | ('L', -6.0, -4.0), ('A', -6.0381, -4.1914, -6.1466, -4.3537), ('L', -9.9, -8.1037), |
| 239 | ('A', -10.0622, -8.212, -10.2534, -8.25), ('L', -12.3, -8.25), ('A', -12.6536, -8.1036, -12.8, -7.75), |
| 240 | ('L', -12.8, -4.5), ('A', -12.9464, -4.1464, -13.3, -4.0), ('L', -14.3, -4.0), |
| 241 | ('A', -14.4414, -4.0586, -14.5, -4.2), ('L', -14.5, -4.5), ('L', -14.8, -4.5), |
| 242 | ('A', -14.9414, -4.5586, -15.0, -4.7)], |
| 243 | [-13.7, -12.7, ('L', -13.7, -10.5), ('A', -13.4071, -9.7929, -12.7, -9.5), ('L', -10.5, -9.5), |
| 244 | ('A', -9.7929, -9.7929, -9.5, -10.5), ('L', -9.5, -12.7), ('A', -9.7929, -13.4071, -10.5, -13.7), |
| 245 | ('L', -12.7, -13.7), ('A', -13.4071, -13.4071, -13.7, -12.7)], |
| 246 | [12.7, -13.7, ('L', 10.5, -13.7), ('A', 9.7929, -13.4071, 9.5, -12.7), ('L', 9.5, -10.5), |
| 247 | ('A', 9.7929, -9.7929, 10.5, -9.5), ('L', 12.7, -9.5), ('A', 13.4071, -9.7929, 13.7, -10.5), |
| 248 | ('L', 13.7, -12.7), ('A', 13.4071, -13.4071, 12.7, -13.7)], |
| 249 | [3.2812, 1.5988, ('A', 3.5566, 0.8204, 3.65, 0.0), ('A', 3.5567, -0.82, 3.2815, -1.5981), |
| 250 | ('L', 4.5132, -3.1434), ('A', 3.8895, -3.8887, 3.1444, -4.5125), ('L', 1.5988, -3.2812), |
| 251 | ('A', 0.0004, -3.65, -1.5981, -3.2815), ('L', -3.1434, -4.5132), ('A', -3.8887, -3.8895, -4.5125, -3.1444), |
| 252 | ('L', -3.2812, -1.5988), ('A', -3.65, -0.0004, -3.2815, 1.5981), ('L', -4.5132, 3.1434), |
| 253 | ('A', -3.8895, 3.8887, -3.1444, 4.5125), ('L', -1.5988, 3.2812), ('A', -0.0004, 3.65, 1.5981, 3.2815), |
| 254 | ('L', 3.1434, 4.5132), ('A', 3.8887, 3.8895, 4.5125, 3.1444), ('L', 3.2812, 1.5988)], |
| 255 | [-12.7, 13.7, ('L', -10.5, 13.7), ('A', -9.7929, 13.4071, -9.5, 12.7), ('L', -9.5, 10.5), |
| 256 | ('A', -9.7929, 9.7929, -10.5, 9.5), ('L', -12.7, 9.5), ('A', -13.4071, 9.7929, -13.7, 10.5), |
| 257 | ('L', -13.7, 12.7), ('A', -13.4071, 13.4071, -12.7, 13.7)], |
| 258 | [13.7, 12.7, ('L', 13.7, 10.5), ('A', 13.4071, 9.7929, 12.7, 9.5), ('L', 10.5, 9.5), |
| 259 | ('A', 9.7929, 9.7929, 9.5, 10.5), ('L', 9.5, 12.7), ('A', 9.7929, 13.4071, 10.5, 13.7), ('L', 12.7, 13.7), |
| 260 | ('A', 13.4071, 13.4071, 13.7, 12.7)], |
| 261 | ], |
| 262 | # 3030-HFS6: FreeCAD-library "misumi_profile_hfs_serie6_w8_30x30.step" (Felipe Machado, CC-BY-3.0), |
| 263 | # step.parts profile_misumi_hfs6_30x30_w8_l50: section 30 x 30, |
| 264 | # area 335.1129 mm^2 on the model |
| 265 | "3030-HFS6": [ |
| 266 | [4.5858, 6.0, ('L', -4.5858, 6.0), ('L', -8.25, 9.6642), ('L', -8.25, 13.0), ('L', -4.0, 13.0), |
| 267 | ('L', -4.0, 15.0), ('L', -14.0, 15.0), ('A', -14.7071, 14.7071, -15.0, 14.0), ('L', -15.0, 4.0), |
| 268 | ('L', -13.0, 4.0), ('L', -13.0, 8.25), ('L', -9.6642, 8.25), ('L', -6.0, 4.5858), ('L', -6.0, -4.5858), |
| 269 | ('L', -9.6642, -8.25), ('L', -13.0, -8.25), ('L', -13.0, -4.0), ('L', -15.0, -4.0), ('L', -15.0, -14.0), |
| 270 | ('A', -14.7071, -14.7071, -14.0, -15.0), ('L', -4.0, -15.0), ('L', -4.0, -13.0), ('L', -8.25, -13.0), |
| 271 | ('L', -8.25, -9.6642), ('L', -4.5858, -6.0), ('L', 4.5858, -6.0), ('L', 8.25, -9.6642), ('L', 8.25, -13.0), |
| 272 | ('L', 4.0, -13.0), ('L', 4.0, -15.0), ('L', 14.0, -15.0), ('A', 14.7071, -14.7071, 15.0, -14.0), |
| 273 | ('L', 15.0, -4.0), ('L', 13.0, -4.0), ('L', 13.0, -8.25), ('L', 9.6642, -8.25), ('L', 6.0, -4.5858), |
| 274 | ('L', 6.0, 4.5858), ('L', 9.6642, 8.25), ('L', 13.0, 8.25), ('L', 13.0, 4.0), ('L', 15.0, 4.0), |
| 275 | ('L', 15.0, 14.0), ('A', 14.7071, 14.7071, 14.0, 15.0), ('L', 4.0, 15.0), ('L', 4.0, 13.0), |
| 276 | ('L', 8.25, 13.0), ('L', 8.25, 9.6642), ('L', 4.5858, 6.0)], |
| 277 | [('C', 11.6, -11.6, 2.1)], |
| 278 | [('C', 0.0, 0.0, 3.4)], |
| 279 | [('C', 11.6, 11.6, 2.1)], |
| 280 | [('C', -11.6, -11.6, 2.1)], |
| 281 | [('C', -11.6, 11.6, 2.1)], |
| 282 | ], |
| 283 | # 3060-B8: FreeCAD-library "Profile-30x60-B-Type_Slot8.step" (mathis (Int-Circuit), CC-BY-3.0), |
| 284 | # step.parts profile_3060_b_slot8: section 30 x 60, |
| 285 | # area 552.5767 mm^2 on the model |
| 286 | "3060-B8": [ |
| 287 | [-15.0, -19.7, ('L', -15.0, -28.0), ('A', -14.4142, -29.4142, -13.0, -30.0), ('L', -4.7, -30.0), |
| 288 | ('A', -4.5586, -29.9414, -4.5, -29.8), ('L', -4.5, -29.5), ('L', -4.2, -29.5), |
| 289 | ('A', -4.0586, -29.4414, -4.0, -29.3), ('L', -4.0, -28.3), ('A', -4.1464, -27.9464, -4.5, -27.8), |
| 290 | ('L', -7.75, -27.8), ('A', -8.1036, -27.6536, -8.25, -27.3), ('L', -8.25, -25.26), |
| 291 | ('A', -8.212, -25.0688, -8.1038, -24.9067), ('L', -4.3488, -21.1467), |
| 292 | ('A', -4.1865, -21.0381, -3.995, -21.0), ('L', -0.955, -21.0), ('A', -0.9042, -20.9934, -0.8566, -20.9741), |
| 293 | ('L', -0.0984, -20.5459), ('A', 0.0, -20.52, 0.0984, -20.5459), ('L', 0.8566, -20.9741), |
| 294 | ('A', 0.9042, -20.9934, 0.955, -21.0), ('L', 3.995, -21.0), ('A', 4.1865, -21.0381, 4.3488, -21.1467), |
| 295 | ('L', 8.1038, -24.9067), ('A', 8.212, -25.0688, 8.25, -25.26), ('L', 8.25, -27.3), |
| 296 | ('A', 8.1036, -27.6536, 7.75, -27.8), ('L', 4.5, -27.8), ('A', 4.1464, -27.9464, 4.0, -28.3), |
| 297 | ('L', 4.0, -29.3), ('A', 4.0586, -29.4414, 4.2, -29.5), ('L', 4.5, -29.5), ('L', 4.5, -29.8), |
| 298 | ('A', 4.5586, -29.9414, 4.7, -30.0), ('L', 13.0, -30.0), ('A', 14.4142, -29.4142, 15.0, -28.0), |
| 299 | ('L', 15.0, -19.7), ('A', 14.9414, -19.5586, 14.8, -19.5), ('L', 14.5, -19.5), ('L', 14.5, -19.2), |
| 300 | ('A', 14.4414, -19.0586, 14.3, -19.0), ('L', 13.3, -19.0), ('A', 12.9464, -19.1464, 12.8, -19.5), |
| 301 | ('L', 12.8, -22.75), ('A', 12.6536, -23.1036, 12.3, -23.25), ('L', 10.26, -23.25), |
| 302 | ('A', 10.0688, -23.212, 9.9067, -23.1038), ('L', 6.1467, -19.3488), ('A', 6.0381, -19.1865, 6.0, -18.995), |
| 303 | ('L', 6.0, -15.955), ('A', 5.9934, -15.9042, 5.9741, -15.8566), ('L', 5.5459, -15.0984), |
| 304 | ('A', 5.52, -15.0, 5.5459, -14.9016), ('L', 5.9741, -14.1434), ('A', 5.9934, -14.0958, 6.0, -14.045), |
| 305 | ('L', 6.0, -11.005), ('A', 6.0381, -10.8135, 6.1467, -10.6512), ('L', 9.9067, -6.8962), |
| 306 | ('A', 10.0688, -6.788, 10.26, -6.75), ('L', 12.3, -6.75), ('A', 12.6536, -6.8964, 12.8, -7.25), |
| 307 | ('L', 12.8, -10.5), ('A', 12.9464, -10.8536, 13.3, -11.0), ('L', 14.3, -11.0), |
| 308 | ('A', 14.4414, -10.9414, 14.5, -10.8), ('L', 14.5, -10.5), ('L', 14.8, -10.5), |
| 309 | ('A', 14.9414, -10.4414, 15.0, -10.3), ('L', 15.0, 10.3), ('A', 14.9414, 10.4414, 14.8, 10.5), |
| 310 | ('L', 14.5, 10.5), ('L', 14.5, 10.8), ('A', 14.4414, 10.9414, 14.3, 11.0), ('L', 13.3, 11.0), |
| 311 | ('A', 12.9464, 10.8536, 12.8, 10.5), ('L', 12.8, 7.25), ('A', 12.6536, 6.8964, 12.3, 6.75), |
| 312 | ('L', 10.26, 6.75), ('A', 10.0688, 6.788, 9.9067, 6.8962), ('L', 6.1467, 10.6512), |
| 313 | ('A', 6.0381, 10.8135, 6.0, 11.005), ('L', 6.0, 14.045), ('A', 5.9934, 14.0958, 5.9741, 14.1434), |
| 314 | ('L', 5.5459, 14.9016), ('A', 5.52, 15.0, 5.5459, 15.0984), ('L', 5.9741, 15.8566), |
| 315 | ('A', 5.9934, 15.9042, 6.0, 15.955), ('L', 6.0, 18.995), ('A', 6.0381, 19.1865, 6.1467, 19.3488), |
| 316 | ('L', 9.9067, 23.1038), ('A', 10.0688, 23.212, 10.26, 23.25), ('L', 12.3, 23.25), |
| 317 | ('A', 12.6536, 23.1036, 12.8, 22.75), ('L', 12.8, 19.5), ('A', 12.9464, 19.1464, 13.3, 19.0), |
| 318 | ('L', 14.3, 19.0), ('A', 14.4414, 19.0586, 14.5, 19.2), ('L', 14.5, 19.5), ('L', 14.8, 19.5), |
| 319 | ('A', 14.9414, 19.5586, 15.0, 19.7), ('L', 15.0, 28.0), ('A', 14.4142, 29.4142, 13.0, 30.0), |
| 320 | ('L', 4.7, 30.0), ('A', 4.5586, 29.9414, 4.5, 29.8), ('L', 4.5, 29.5), ('L', 4.2, 29.5), |
| 321 | ('A', 4.0586, 29.4414, 4.0, 29.3), ('L', 4.0, 28.3), ('A', 4.1464, 27.9464, 4.5, 27.8), ('L', 7.75, 27.8), |
| 322 | ('A', 8.1036, 27.6536, 8.25, 27.3), ('L', 8.25, 25.26), ('A', 8.212, 25.0688, 8.1038, 24.9067), |
| 323 | ('L', 4.3488, 21.1467), ('A', 4.1865, 21.0381, 3.995, 21.0), ('L', 0.955, 21.0), |
| 324 | ('A', 0.9042, 20.9934, 0.8566, 20.9741), ('L', 0.0984, 20.5459), ('A', 0.0, 20.52, -0.0984, 20.5459), |
| 325 | ('L', -0.8566, 20.9741), ('A', -0.9042, 20.9934, -0.955, 21.0), ('L', -3.995, 21.0), |
| 326 | ('A', -4.1865, 21.0381, -4.3488, 21.1467), ('L', -8.1038, 24.9067), ('A', -8.212, 25.0688, -8.25, 25.26), |
| 327 | ('L', -8.25, 27.3), ('A', -8.1036, 27.6536, -7.75, 27.8), ('L', -4.5, 27.8), |
| 328 | ('A', -4.1464, 27.9464, -4.0, 28.3), ('L', -4.0, 29.3), ('A', -4.0586, 29.4414, -4.2, 29.5), |
| 329 | ('L', -4.5, 29.5), ('L', -4.5, 29.8), ('A', -4.5586, 29.9414, -4.7, 30.0), ('L', -13.0, 30.0), |
| 330 | ('A', -14.4142, 29.4142, -15.0, 28.0), ('L', -15.0, 19.7), ('A', -14.9414, 19.5586, -14.8, 19.5), |
| 331 | ('L', -14.5, 19.5), ('L', -14.5, 19.2), ('A', -14.4414, 19.0586, -14.3, 19.0), ('L', -13.3, 19.0), |
| 332 | ('A', -12.9464, 19.1464, -12.8, 19.5), ('L', -12.8, 22.75), ('A', -12.6536, 23.1036, -12.3, 23.25), |
| 333 | ('L', -10.26, 23.25), ('A', -10.0688, 23.212, -9.9067, 23.1038), ('L', -6.1467, 19.3488), |
| 334 | ('A', -6.0381, 19.1865, -6.0, 18.995), ('L', -6.0, 15.955), ('A', -5.9934, 15.9042, -5.9741, 15.8566), |
| 335 | ('L', -5.5459, 15.0984), ('A', -5.52, 15.0, -5.5459, 14.9016), ('L', -5.9741, 14.1434), |
| 336 | ('A', -5.9934, 14.0958, -6.0, 14.045), ('L', -6.0, 11.005), ('A', -6.0381, 10.8135, -6.1467, 10.6512), |
| 337 | ('L', -9.9067, 6.8962), ('A', -10.0688, 6.788, -10.26, 6.75), ('L', -12.3, 6.75), |
| 338 | ('A', -12.6536, 6.8964, -12.8, 7.25), ('L', -12.8, 10.5), ('A', -12.9464, 10.8536, -13.3, 11.0), |
| 339 | ('L', -14.3, 11.0), ('A', -14.4414, 10.9414, -14.5, 10.8), ('L', -14.5, 10.5), ('L', -14.8, 10.5), |
| 340 | ('A', -14.9414, 10.4414, -15.0, 10.3), ('L', -15.0, -10.3), ('A', -14.9414, -10.4414, -14.8, -10.5), |
| 341 | ('L', -14.5, -10.5), ('L', -14.5, -10.8), ('A', -14.4414, -10.9414, -14.3, -11.0), ('L', -13.3, -11.0), |
| 342 | ('A', -12.9464, -10.8536, -12.8, -10.5), ('L', -12.8, -7.25), ('A', -12.6536, -6.8964, -12.3, -6.75), |
| 343 | ('L', -10.26, -6.75), ('A', -10.0688, -6.788, -9.9067, -6.8962), ('L', -6.1467, -10.6512), |
| 344 | ('A', -6.0381, -10.8135, -6.0, -11.005), ('L', -6.0, -14.045), ('A', -5.9934, -14.0958, -5.9741, -14.1434), |
| 345 | ('L', -5.5459, -14.9016), ('A', -5.52, -15.0, -5.5459, -15.0984), ('L', -5.9741, -15.8566), |
| 346 | ('A', -5.9934, -15.9042, -6.0, -15.955), ('L', -6.0, -18.995), ('A', -6.0381, -19.1865, -6.1467, -19.3488), |
| 347 | ('L', -9.9067, -23.1038), ('A', -10.0688, -23.212, -10.26, -23.25), ('L', -12.3, -23.25), |
| 348 | ('A', -12.6536, -23.1036, -12.8, -22.75), ('L', -12.8, -19.5), ('A', -12.9464, -19.1464, -13.3, -19.0), |
| 349 | ('L', -14.3, -19.0), ('A', -14.4414, -19.0586, -14.5, -19.2), ('L', -14.5, -19.5), ('L', -14.8, -19.5), |
| 350 | ('A', -14.9414, -19.5586, -15.0, -19.7)], |
| 351 | [-12.7, -28.7, ('A', -13.4071, -28.4071, -13.7, -27.7), ('L', -13.7, -25.5), |
| 352 | ('A', -13.4071, -24.7929, -12.7, -24.5), ('L', -10.5, -24.5), ('A', -9.7929, -24.7929, -9.5, -25.5), |
| 353 | ('L', -9.5, -27.7), ('A', -9.7929, -28.4071, -10.5, -28.7), ('L', -12.7, -28.7)], |
| 354 | [13.7, -27.7, ('A', 13.4071, -28.4071, 12.7, -28.7), ('L', 10.5, -28.7), ('A', 9.7929, -28.4071, 9.5, -27.7), |
| 355 | ('L', 9.5, -25.5), ('A', 9.7929, -24.7929, 10.5, -24.5), ('L', 12.7, -24.5), |
| 356 | ('A', 13.4071, -24.7929, 13.7, -25.5), ('L', 13.7, -27.7)], |
| 357 | [-3.1439, -19.5129, ('A', -3.8891, -18.8891, -4.5129, -18.1439), ('L', -3.2814, -16.5985), |
| 358 | ('A', -3.65, -15.0, -3.2814, -13.4015), ('L', -4.5129, -11.8561), |
| 359 | ('A', -3.8891, -11.1109, -3.1439, -10.4871), ('L', -1.5985, -11.7186), ('A', 0.0, -11.35, 1.5985, -11.7186), |
| 360 | ('L', 3.1439, -10.4871), ('A', 3.8891, -11.1109, 4.5129, -11.8561), ('L', 3.2814, -13.4015), |
| 361 | ('A', 3.65, -15.0, 3.2814, -16.5985), ('L', 4.5129, -18.1439), ('A', 3.8891, -18.8891, 3.1439, -19.5129), |
| 362 | ('L', 1.5985, -18.2814), ('A', 0.0, -18.65, -1.5985, -18.2814), ('L', -3.1439, -19.5129)], |
| 363 | [9.99, -5.1, ('A', 9.4156, -5.2143, 8.9288, -5.5399), ('L', 6.4112, -8.0601), |
| 364 | ('A', 5.9244, -8.3857, 5.35, -8.5), ('L', -5.35, -8.5), ('A', -5.9244, -8.3857, -6.4112, -8.0601), |
| 365 | ('L', -8.9288, -5.5399), ('A', -9.4156, -5.2143, -9.99, -5.1), ('L', -11.85, -5.1), |
| 366 | ('A', -12.9107, -4.6607, -13.35, -3.6), ('L', -13.35, 0.0), ('L', -13.35, 3.6), |
| 367 | ('A', -12.9107, 4.6607, -11.85, 5.1), ('L', -9.99, 5.1), ('A', -9.4156, 5.2143, -8.9288, 5.5399), |
| 368 | ('L', -6.4112, 8.0601), ('A', -5.9244, 8.3857, -5.35, 8.5), ('L', 5.35, 8.5), |
| 369 | ('A', 5.9244, 8.3857, 6.4112, 8.0601), ('L', 8.9288, 5.5399), ('A', 9.4156, 5.2143, 9.99, 5.1), |
| 370 | ('L', 11.85, 5.1), ('A', 12.9107, 4.6607, 13.35, 3.6), ('L', 13.35, 0.0), ('L', 13.35, -3.6), |
| 371 | ('A', 12.9107, -4.6607, 11.85, -5.1), ('L', 9.99, -5.1)], |
| 372 | [-13.7, 25.5, ('L', -13.7, 27.7), ('A', -13.4071, 28.4071, -12.7, 28.7), ('L', -10.5, 28.7), |
| 373 | ('A', -9.7929, 28.4071, -9.5, 27.7), ('L', -9.5, 25.5), ('A', -9.7929, 24.7929, -10.5, 24.5), |
| 374 | ('L', -12.7, 24.5), ('A', -13.4071, 24.7929, -13.7, 25.5)], |
| 375 | [-3.2814, 16.5985, ('L', -4.5129, 18.1439), ('A', -3.8891, 18.8891, -3.1439, 19.5129), |
| 376 | ('L', -1.5985, 18.2814), ('A', 0.0, 18.65, 1.5985, 18.2814), ('L', 3.1439, 19.5129), |
| 377 | ('A', 3.8891, 18.8891, 4.5129, 18.1439), ('L', 3.2814, 16.5985), ('A', 3.65, 15.0, 3.2814, 13.4015), |
| 378 | ('L', 4.5129, 11.8561), ('A', 3.8891, 11.1109, 3.1439, 10.4871), ('L', 1.5985, 11.7186), |
| 379 | ('A', 0.0, 11.35, -1.5985, 11.7186), ('L', -3.1439, 10.4871), ('A', -3.8891, 11.1109, -4.5129, 11.8561), |
| 380 | ('L', -3.2814, 13.4015), ('A', -3.65, 15.0, -3.2814, 16.5985)], |
| 381 | [10.5, 28.7, ('L', 12.7, 28.7), ('A', 13.4071, 28.4071, 13.7, 27.7), ('L', 13.7, 25.5), |
| 382 | ('A', 13.4071, 24.7929, 12.7, 24.5), ('L', 10.5, 24.5), ('A', 9.7929, 24.7929, 9.5, 25.5), ('L', 9.5, 27.7), |
| 383 | ('A', 9.7929, 28.4071, 10.5, 28.7)], |
| 384 | ], |
| 385 | # 4040L-I8: FreeCAD-library "Profile-40x40L-I-Type_Slot8.step" (mathis (Int-Circuit), CC-BY-3.0), |
| 386 | # step.parts profile_4040l_i_slot8: section 40 x 40, |
| 387 | # area 657.0137 mm^2 on the model |
| 388 | "4040L-I8": [ |
| 389 | [-20.0, -5.5, ('L', -20.0, -16.0), ('A', -18.8284, -18.8284, -16.0, -20.0), ('L', -5.5, -20.0), |
| 390 | ('A', -4.4393, -19.5607, -4.0, -18.5), ('L', -4.0, -16.5), ('A', -4.2929, -15.7929, -5.0, -15.5), |
| 391 | ('L', -6.5, -15.5), ('A', -6.8536, -15.6464, -7.0, -16.0), ('L', -7.0, -17.5), |
| 392 | ('A', -7.1464, -17.8536, -7.5, -18.0), ('A', -9.2678, -17.2678, -10.0, -15.5), ('L', -10.0, -14.19), |
| 393 | ('A', -9.6194, -12.2766, -8.5355, -10.6545), ('L', -7.0955, -9.2145), ('A', -5.4734, -8.1306, -3.56, -7.75), |
| 394 | ('L', 3.56, -7.75), ('A', 5.4734, -8.1306, 7.0955, -9.2145), ('L', 8.5355, -10.6545), |
| 395 | ('A', 9.6194, -12.2766, 10.0, -14.19), ('L', 10.0, -15.5), ('A', 9.2678, -17.2678, 7.5, -18.0), |
| 396 | ('A', 7.1464, -17.8536, 7.0, -17.5), ('L', 7.0, -16.0), ('A', 6.8536, -15.6464, 6.5, -15.5), |
| 397 | ('L', 5.0, -15.5), ('A', 4.2929, -15.7929, 4.0, -16.5), ('L', 4.0, -18.5), |
| 398 | ('A', 4.4393, -19.5607, 5.5, -20.0), ('L', 16.0, -20.0), ('A', 18.8284, -18.8284, 20.0, -16.0), |
| 399 | ('L', 20.0, -5.5), ('A', 19.5607, -4.4393, 18.5, -4.0), ('L', 16.5, -4.0), |
| 400 | ('A', 15.7929, -4.2929, 15.5, -5.0), ('L', 15.5, -6.5), ('A', 15.6464, -6.8536, 16.0, -7.0), |
| 401 | ('L', 17.5, -7.0), ('A', 17.8536, -7.1464, 18.0, -7.5), ('A', 17.2678, -9.2678, 15.5, -10.0), |
| 402 | ('L', 14.19, -10.0), ('A', 12.2766, -9.6194, 10.6545, -8.5355), ('L', 9.2145, -7.0955), |
| 403 | ('A', 8.1306, -5.4734, 7.75, -3.56), ('L', 7.75, 3.56), ('A', 8.1306, 5.4734, 9.2145, 7.0955), |
| 404 | ('L', 10.6545, 8.5355), ('A', 12.2766, 9.6194, 14.19, 10.0), ('L', 15.5, 10.0), |
| 405 | ('A', 17.2678, 9.2678, 18.0, 7.5), ('A', 17.8536, 7.1464, 17.5, 7.0), ('L', 16.0, 7.0), |
| 406 | ('A', 15.6464, 6.8536, 15.5, 6.5), ('L', 15.5, 5.0), ('A', 15.7929, 4.2929, 16.5, 4.0), ('L', 18.5, 4.0), |
| 407 | ('A', 19.5607, 4.4393, 20.0, 5.5), ('L', 20.0, 16.0), ('A', 18.8284, 18.8284, 16.0, 20.0), ('L', 5.5, 20.0), |
| 408 | ('A', 4.4393, 19.5607, 4.0, 18.5), ('L', 4.0, 16.5), ('A', 4.2929, 15.7929, 5.0, 15.5), ('L', 6.5, 15.5), |
| 409 | ('A', 6.8536, 15.6464, 7.0, 16.0), ('L', 7.0, 17.5), ('A', 7.1464, 17.8536, 7.5, 18.0), |
| 410 | ('A', 9.2678, 17.2678, 10.0, 15.5), ('L', 10.0, 14.19), ('A', 9.6194, 12.2766, 8.5355, 10.6545), |
| 411 | ('L', 7.0955, 9.2145), ('A', 5.4734, 8.1306, 3.56, 7.75), ('L', -3.56, 7.75), |
| 412 | ('A', -5.4734, 8.1306, -7.0955, 9.2145), ('L', -8.5355, 10.6545), ('A', -9.6194, 12.2766, -10.0, 14.19), |
| 413 | ('L', -10.0, 15.5), ('A', -9.2678, 17.2678, -7.5, 18.0), ('A', -7.1464, 17.8536, -7.0, 17.5), |
| 414 | ('L', -7.0, 16.0), ('A', -6.8536, 15.6464, -6.5, 15.5), ('L', -5.0, 15.5), |
| 415 | ('A', -4.2929, 15.7929, -4.0, 16.5), ('L', -4.0, 18.5), ('A', -4.4393, 19.5607, -5.5, 20.0), |
| 416 | ('L', -16.0, 20.0), ('A', -18.8284, 18.8284, -20.0, 16.0), ('L', -20.0, 5.5), |
| 417 | ('A', -19.5607, 4.4393, -18.5, 4.0), ('L', -16.5, 4.0), ('A', -15.7929, 4.2929, -15.5, 5.0), |
| 418 | ('L', -15.5, 6.5), ('A', -15.6464, 6.8536, -16.0, 7.0), ('L', -17.5, 7.0), |
| 419 | ('A', -17.8536, 7.1464, -18.0, 7.5), ('A', -17.2678, 9.2678, -15.5, 10.0), ('L', -14.19, 10.0), |
| 420 | ('A', -12.2766, 9.6194, -10.6545, 8.5355), ('L', -9.2145, 7.0955), ('A', -8.1306, 5.4734, -7.75, 3.56), |
| 421 | ('L', -7.75, -3.56), ('A', -8.1306, -5.4734, -9.2145, -7.0955), ('L', -10.6545, -8.5355), |
| 422 | ('A', -12.2766, -9.6194, -14.19, -10.0), ('L', -15.5, -10.0), ('A', -17.2678, -9.2678, -18.0, -7.5), |
| 423 | ('A', -17.8536, -7.1464, -17.5, -7.0), ('L', -16.0, -7.0), ('A', -15.6464, -6.8536, -15.5, -6.5), |
| 424 | ('L', -15.5, -5.0), ('A', -15.7929, -4.2929, -16.5, -4.0), ('L', -18.5, -4.0), |
| 425 | ('A', -19.5607, -4.4393, -20.0, -5.5)], |
| 426 | [-16.0, -18.2, ('A', -17.5556, -17.5556, -18.2, -16.0), ('L', -18.2, -12.3), |
| 427 | ('A', -18.0536, -11.9464, -17.7, -11.8), ('L', -12.3, -11.8), ('A', -11.9464, -11.9464, -11.8, -12.3), |
| 428 | ('L', -11.8, -17.7), ('A', -11.9464, -18.0536, -12.3, -18.2), ('L', -16.0, -18.2)], |
| 429 | [18.2, -16.0, ('A', 17.5556, -17.5556, 16.0, -18.2), ('L', 12.3, -18.2), |
| 430 | ('A', 11.9464, -18.0536, 11.8, -17.7), ('L', 11.8, -12.3), ('A', 11.9464, -11.9464, 12.3, -11.8), |
| 431 | ('L', 17.7, -11.8), ('A', 18.0536, -11.9464, 18.2, -12.3), ('L', 18.2, -16.0)], |
| 432 | [-18.2, 16.0, ('A', -17.5556, 17.5556, -16.0, 18.2), ('L', -12.3, 18.2), |
| 433 | ('A', -11.9464, 18.0536, -11.8, 17.7), ('L', -11.8, 12.3), ('A', -11.9464, 11.9464, -12.3, 11.8), |
| 434 | ('L', -17.7, 11.8), ('A', -18.0536, 11.9464, -18.2, 12.3), ('L', -18.2, 16.0)], |
| 435 | [('C', 0.0, 0.0, 3.4)], |
| 436 | [16.0, 18.2, ('A', 17.5556, 17.5556, 18.2, 16.0), ('L', 18.2, 12.3), ('A', 18.0536, 11.9464, 17.7, 11.8), |
| 437 | ('L', 12.3, 11.8), ('A', 11.9464, 11.9464, 11.8, 12.3), ('L', 11.8, 17.7), |
| 438 | ('A', 11.9464, 18.0536, 12.3, 18.2), ('L', 16.0, 18.2)], |
| 439 | ], |
| 440 | # 4080L-I8: FreeCAD-library "Profile-40x80L-I-Type_Slot8-Body.step" (mathis (Int-Circuit), CC-BY-3.0), |
| 441 | # step.parts profile_4080l_i_slot8: section 40 x 80, |
| 442 | # area 1133.4545 mm^2 on the model; drawn turned 90 degrees (the longer side along Y) |
| 443 | "4080L-I8": [ |
| 444 | [5.6, -40.0, ('L', 16.0, -40.0), ('A', 18.8284, -38.8284, 20.0, -36.0), ('L', 20.0, -25.4), |
| 445 | ('A', 19.5607, -24.3394, 18.5, -23.9), ('L', 16.5, -23.9), ('A', 15.7929, -24.1929, 15.5, -24.9), |
| 446 | ('L', 15.5, -26.4), ('A', 15.6464, -26.7536, 16.0, -26.9), ('L', 17.5, -26.9), |
| 447 | ('A', 17.8536, -27.0465, 18.0, -27.4), ('A', 17.2678, -29.1678, 15.5, -29.9), ('L', 14.19, -29.9), |
| 448 | ('A', 12.2766, -29.5194, 10.6545, -28.4355), ('L', 9.2145, -26.9955), ('A', 8.1306, -25.3734, 7.75, -23.46), |
| 449 | ('L', 7.75, -16.34), ('A', 8.1306, -14.4266, 9.2145, -12.8045), ('L', 10.6545, -11.3645), |
| 450 | ('A', 12.2766, -10.2806, 14.19, -9.9), ('L', 15.5, -9.9), ('A', 17.2678, -10.6322, 18.0, -12.4), |
| 451 | ('A', 17.8536, -12.7536, 17.5, -12.9), ('L', 16.0, -12.9), ('A', 15.6464, -13.0465, 15.5, -13.4), |
| 452 | ('L', 15.5, -14.9), ('A', 15.7929, -15.6071, 16.5, -15.9), ('L', 18.5, -15.9), |
| 453 | ('A', 19.5607, -15.4607, 20.0, -14.4), ('L', 20.0, 14.4), ('A', 19.5607, 15.4607, 18.5, 15.9), |
| 454 | ('L', 16.5, 15.9), ('A', 15.7929, 15.6071, 15.5, 14.9), ('L', 15.5, 13.4), |
| 455 | ('A', 15.6464, 13.0465, 16.0, 12.9), ('L', 17.5, 12.9), ('A', 17.8536, 12.7536, 18.0, 12.4), |
| 456 | ('A', 17.2678, 10.6322, 15.5, 9.9), ('L', 14.19, 9.9), ('A', 12.2766, 10.2806, 10.6545, 11.3645), |
| 457 | ('L', 9.2145, 12.8045), ('A', 8.1306, 14.4266, 7.75, 16.34), ('L', 7.75, 23.46), |
| 458 | ('A', 8.1306, 25.3734, 9.2145, 26.9955), ('L', 10.6545, 28.4355), ('A', 12.2766, 29.5194, 14.19, 29.9), |
| 459 | ('L', 15.5, 29.9), ('A', 17.2678, 29.1678, 18.0, 27.4), ('A', 17.8536, 27.0465, 17.5, 26.9), |
| 460 | ('L', 16.0, 26.9), ('A', 15.6464, 26.7536, 15.5, 26.4), ('L', 15.5, 24.9), |
| 461 | ('A', 15.7929, 24.1929, 16.5, 23.9), ('L', 18.5, 23.9), ('A', 19.5607, 24.3394, 20.0, 25.4), |
| 462 | ('L', 20.0, 36.0), ('A', 18.8284, 38.8284, 16.0, 40.0), ('L', 5.6, 40.0), ('A', 4.5393, 39.5607, 4.1, 38.5), |
| 463 | ('L', 4.1, 36.5), ('A', 4.3929, 35.7929, 5.1, 35.5), ('L', 6.6, 35.5), ('A', 6.9535, 35.6464, 7.1, 36.0), |
| 464 | ('L', 7.1, 37.5), ('A', 7.2464, 37.8536, 7.6, 38.0), ('A', 9.3678, 37.2678, 10.1, 35.5), ('L', 10.1, 34.19), |
| 465 | ('A', 9.7194, 32.2766, 8.6355, 30.6545), ('L', 7.1955, 29.2145), ('A', 5.5734, 28.1306, 3.66, 27.75), |
| 466 | ('L', -3.46, 27.75), ('A', -5.3734, 28.1306, -6.9955, 29.2145), ('L', -8.4355, 30.6545), |
| 467 | ('A', -9.5194, 32.2766, -9.9, 34.19), ('L', -9.9, 35.5), ('A', -9.1678, 37.2678, -7.4, 38.0), |
| 468 | ('A', -7.0465, 37.8536, -6.9, 37.5), ('L', -6.9, 36.0), ('A', -6.7536, 35.6464, -6.4, 35.5), |
| 469 | ('L', -4.9, 35.5), ('A', -4.1929, 35.7929, -3.9, 36.5), ('L', -3.9, 38.5), |
| 470 | ('A', -4.3394, 39.5607, -5.4, 40.0), ('L', -16.0, 40.0), ('A', -18.8284, 38.8284, -20.0, 36.0), |
| 471 | ('L', -20.0, 25.6), ('A', -19.5607, 24.5393, -18.5, 24.1), ('L', -16.5, 24.1), |
| 472 | ('A', -15.7929, 24.3929, -15.5, 25.1), ('L', -15.5, 26.6), ('A', -15.6464, 26.9535, -16.0, 27.1), |
| 473 | ('L', -17.5, 27.1), ('A', -17.8536, 27.2464, -18.0, 27.6), ('A', -17.2678, 29.3678, -15.5, 30.1), |
| 474 | ('L', -14.19, 30.1), ('A', -12.2766, 29.7194, -10.6545, 28.6355), ('L', -9.2145, 27.1955), |
| 475 | ('A', -8.1306, 25.5734, -7.75, 23.66), ('L', -7.75, 16.54), ('A', -8.1306, 14.6266, -9.2145, 13.0045), |
| 476 | ('L', -10.6545, 11.5645), ('A', -12.2766, 10.4806, -14.19, 10.1), ('L', -15.5, 10.1), |
| 477 | ('A', -17.2678, 10.8322, -18.0, 12.6), ('A', -17.8536, 12.9535, -17.5, 13.1), ('L', -16.0, 13.1), |
| 478 | ('A', -15.6464, 13.2464, -15.5, 13.6), ('L', -15.5, 15.1), ('A', -15.7929, 15.8071, -16.5, 16.1), |
| 479 | ('L', -18.5, 16.1), ('A', -19.5607, 15.6606, -20.0, 14.6), ('L', -20.0, -14.6), |
| 480 | ('A', -19.5607, -15.6606, -18.5, -16.1), ('L', -16.5, -16.1), ('A', -15.7929, -15.8071, -15.5, -15.1), |
| 481 | ('L', -15.5, -13.6), ('A', -15.6464, -13.2464, -16.0, -13.1), ('L', -17.5, -13.1), |
| 482 | ('A', -17.8536, -12.9535, -18.0, -12.6), ('A', -17.2678, -10.8322, -15.5, -10.1), ('L', -14.19, -10.1), |
| 483 | ('A', -12.2766, -10.4806, -10.6545, -11.5645), ('L', -9.2145, -13.0045), |
| 484 | ('A', -8.1306, -14.6266, -7.75, -16.54), ('L', -7.75, -23.66), ('A', -8.1306, -25.5734, -9.2145, -27.1955), |
| 485 | ('L', -10.6545, -28.6355), ('A', -12.2766, -29.7194, -14.19, -30.1), ('L', -15.5, -30.1), |
| 486 | ('A', -17.2678, -29.3678, -18.0, -27.6), ('A', -17.8536, -27.2464, -17.5, -27.1), ('L', -16.0, -27.1), |
| 487 | ('A', -15.6464, -26.9535, -15.5, -26.6), ('L', -15.5, -25.1), ('A', -15.7929, -24.3929, -16.5, -24.1), |
| 488 | ('L', -18.5, -24.1), ('A', -19.5607, -24.5393, -20.0, -25.6), ('L', -20.0, -36.0), |
| 489 | ('A', -18.8284, -38.8284, -16.0, -40.0), ('L', -5.4, -40.0), ('A', -4.3394, -39.5607, -3.9, -38.5), |
| 490 | ('L', -3.9, -36.5), ('A', -4.1929, -35.7929, -4.9, -35.5), ('L', -6.4, -35.5), |
| 491 | ('A', -6.7536, -35.6464, -6.9, -36.0), ('L', -6.9, -37.5), ('A', -7.0465, -37.8536, -7.4, -38.0), |
| 492 | ('A', -9.1678, -37.2678, -9.9, -35.5), ('L', -9.9, -34.19), ('A', -9.5194, -32.2766, -8.4355, -30.6545), |
| 493 | ('L', -6.9955, -29.2145), ('A', -5.3734, -28.1306, -3.46, -27.75), ('L', 3.66, -27.75), |
| 494 | ('A', 5.5734, -28.1306, 7.1955, -29.2145), ('L', 8.6355, -30.6545), ('A', 9.7194, -32.2766, 10.1, -34.19), |
| 495 | ('L', 10.1, -35.5), ('A', 9.3678, -37.2678, 7.6, -38.0), ('A', 7.2464, -37.8536, 7.1, -37.5), |
| 496 | ('L', 7.1, -36.0), ('A', 6.9535, -35.6464, 6.6, -35.5), ('L', 5.1, -35.5), |
| 497 | ('A', 4.3929, -35.7929, 4.1, -36.5), ('L', 4.1, -38.5), ('A', 4.5393, -39.5607, 5.6, -40.0)], |
| 498 | [12.3, -38.2, ('A', 11.9464, -38.0536, 11.8, -37.7), ('L', 11.8, -32.3), |
| 499 | ('A', 11.9464, -31.9464, 12.3, -31.8), ('L', 17.7, -31.8), ('A', 18.0536, -31.9464, 18.2, -32.3), |
| 500 | ('L', 18.2, -36.0), ('A', 17.5556, -37.5556, 16.0, -38.2), ('L', 12.3, -38.2)], |
| 501 | [12.3, 38.2, ('L', 16.0, 38.2), ('A', 17.5556, 37.5556, 18.2, 36.0), ('L', 18.2, 32.3), |
| 502 | ('A', 18.0536, 31.9464, 17.7, 31.8), ('L', 12.3, 31.8), ('A', 11.9464, 31.9464, 11.8, 32.3), |
| 503 | ('L', 11.8, 37.7), ('A', 11.9464, 38.0536, 12.3, 38.2)], |
| 504 | [('C', 0.0, -20.0, 3.35)], |
| 505 | [-12.3, -38.2, ('L', -16.0, -38.2), ('A', -17.5556, -37.5556, -18.2, -36.0), ('L', -18.2, -32.3), |
| 506 | ('A', -18.0536, -31.9464, -17.7, -31.8), ('L', -12.3, -31.8), ('A', -11.9464, -31.9464, -11.8, -32.3), |
| 507 | ('L', -11.8, -37.7), ('A', -11.9464, -38.0536, -12.3, -38.2)], |
| 508 | [11.75, -8.25, ('L', 11.4754, -8.2522), ('L', 11.201, -8.2593), ('L', 10.9267, -8.2717), |
| 509 | ('L', 10.6527, -8.2902), ('L', 10.3794, -8.3157), ('L', 10.1069, -8.3493), ('L', 9.8357, -8.3922), |
| 510 | ('L', 9.5665, -8.4464), ('L', 9.3004, -8.5138), ('L', 9.039, -8.5976), ('L', 8.7849, -8.7014), |
| 511 | ('L', 8.5425, -8.83), ('L', 8.3189, -8.989), ('L', 8.1253, -9.1832), ('L', 7.9761, -9.4129), |
| 512 | ('L', 7.8829, -9.6706), ('L', 7.5158, -11.2176), ('L', 7.4059, -11.4721), ('L', 7.2431, -11.6965), |
| 513 | ('L', 7.04, -11.8855), ('L', 6.8098, -12.0405), ('L', 6.5623, -12.1664), ('L', 6.304, -12.2685), |
| 514 | ('L', 6.0389, -12.3512), ('L', 5.7694, -12.4181), ('L', 5.4969, -12.4719), ('L', 5.2224, -12.5147), |
| 515 | ('L', 4.9467, -12.5483), ('L', 4.6701, -12.5738), ('L', 4.3929, -12.5924), ('L', 4.1155, -12.6048), |
| 516 | ('L', 3.8378, -12.6119), ('L', 3.56, -12.6141), ('L', -3.56, -12.6141), ('L', -3.8378, -12.6119), |
| 517 | ('L', -4.1155, -12.6048), ('L', -4.3929, -12.5924), ('L', -4.6701, -12.5738), ('L', -4.9467, -12.5483), |
| 518 | ('L', -5.2224, -12.5147), ('L', -5.4969, -12.4719), ('L', -5.7694, -12.4181), ('L', -6.0389, -12.3512), |
| 519 | ('L', -6.304, -12.2685), ('L', -6.5623, -12.1664), ('L', -6.8098, -12.0405), ('L', -7.04, -11.8855), |
| 520 | ('L', -7.2431, -11.6965), ('L', -7.4059, -11.4721), ('L', -7.5158, -11.2176), ('L', -7.8829, -9.6706), |
| 521 | ('L', -7.9761, -9.4129), ('L', -8.1253, -9.1832), ('L', -8.3189, -8.989), ('L', -8.5425, -8.83), |
| 522 | ('L', -8.7849, -8.7014), ('L', -9.039, -8.5976), ('L', -9.3004, -8.5138), ('L', -9.5665, -8.4464), |
| 523 | ('L', -9.8357, -8.3922), ('L', -10.1069, -8.3493), ('L', -10.3794, -8.3157), ('L', -10.6527, -8.2902), |
| 524 | ('L', -10.9267, -8.2717), ('L', -11.201, -8.2593), ('L', -11.4754, -8.2522), ('L', -11.75, -8.25), |
| 525 | ('L', -15.5, -8.25), ('A', -17.2678, -7.5178, -18.0, -5.75), ('L', -18.0, 5.75), |
| 526 | ('A', -17.2678, 7.5178, -15.5, 8.25), ('L', -11.75, 8.25), ('L', -11.4737, 8.2522), ('L', -11.1975, 8.2593), |
| 527 | ('L', -10.9215, 8.2717), ('L', -10.6458, 8.2903), ('L', -10.3707, 8.3158), ('L', -10.0965, 8.3494), |
| 528 | ('L', -9.8236, 8.3923), ('L', -9.5526, 8.4463), ('L', -9.2847, 8.5135), ('L', -9.0213, 8.5968), |
| 529 | ('L', -8.765, 8.6997), ('L', -8.5199, 8.827), ('L', -8.2928, 8.9839), ('L', -8.0941, 9.1753), |
| 530 | ('L', -7.9375, 9.4023), ('L', -7.8354, 9.6584), ('L', -7.4167, 11.1923), ('L', -7.3255, 11.4502), |
| 531 | ('L', -7.1778, 11.6806), ('L', -6.9853, 11.8753), ('L', -6.7626, 12.0348), ('L', -6.5208, 12.1637), |
| 532 | ('L', -6.2671, 12.2677), ('L', -6.0061, 12.3515), ('L', -5.7404, 12.4191), ('L', -5.4717, 12.4732), |
| 533 | ('L', -5.2009, 12.5162), ('L', -4.9288, 12.5498), ('L', -4.6558, 12.5753), ('L', -4.3822, 12.5939), |
| 534 | ('L', -4.1083, 12.6063), ('L', -3.8342, 12.6133), ('L', -3.56, 12.6156), ('L', 3.56, 12.6156), |
| 535 | ('L', 3.8345, 12.6134), ('L', 4.1088, 12.6063), ('L', 4.383, 12.5939), ('L', 4.6569, 12.5754), |
| 536 | ('L', 4.9301, 12.5499), ('L', 5.2025, 12.5163), ('L', 5.4736, 12.4734), ('L', 5.7427, 12.4192), |
| 537 | ('L', 6.0087, 12.3517), ('L', 6.27, 12.268), ('L', 6.524, 12.1641), ('L', 6.7662, 12.0354), |
| 538 | ('L', 6.9896, 11.8763), ('L', 7.1828, 11.682), ('L', 7.3317, 11.4521), ('L', 7.4243, 11.1944), |
| 539 | ('L', 7.8391, 9.6594), ('L', 7.9405, 9.4032), ('L', 8.0965, 9.176), ('L', 8.2948, 8.9843), |
| 540 | ('L', 8.5216, 8.8272), ('L', 8.7665, 8.6999), ('L', 9.0227, 8.5969), ('L', 9.2859, 8.5136), |
| 541 | ('L', 9.5537, 8.4463), ('L', 9.8245, 8.3923), ('L', 10.0973, 8.3494), ('L', 10.3714, 8.3158), |
| 542 | ('L', 10.6464, 8.2903), ('L', 10.9219, 8.2717), ('L', 11.1978, 8.2593), ('L', 11.4739, 8.2522), |
| 543 | ('L', 11.75, 8.25), ('L', 15.5, 8.25), ('A', 17.2678, 7.5178, 18.0, 5.75), ('L', 18.0, -5.75), |
| 544 | ('A', 17.2678, -7.5178, 15.5, -8.25), ('L', 11.75, -8.25)], |
| 545 | [('C', 0.0, 20.0, 3.35)], |
| 546 | [-12.3, 38.2, ('A', -11.9464, 38.0536, -11.8, 37.7), ('L', -11.8, 32.3), |
| 547 | ('A', -11.9464, 31.9464, -12.3, 31.8), ('L', -17.7, 31.8), ('A', -18.0536, 31.9464, -18.2, 32.3), |
| 548 | ('L', -18.2, 36.0), ('A', -17.5556, 37.5556, -16.0, 38.2), ('L', -12.3, 38.2)], |
| 549 | ], |
| 550 | } |
| 551 | FINISHES = {"clear": "#cfd2d6", "black": "#2b2c2e"} |
| 552 | |
| 553 | |
| 554 | def loop_wire(loop): |
| 555 | if isinstance(loop[0], (tuple, list)): # ("C", cx, cy, r) |
| 556 | _, cx, cy, r = loop[0] |
| 557 | return cq.Wire.makeCircle(r, cq.Vector(cx, cy, 0), cq.Vector(0, 0, 1)) |
| 558 | x, y = loop[0], loop[1] |
| 559 | edges = [] |
| 560 | for seg in loop[2:]: |
| 561 | start = cq.Vector(x, y, 0) |
| 562 | if seg[0] == "L": |
| 563 | x, y = seg[1], seg[2] |
| 564 | edges.append(cq.Edge.makeLine(start, cq.Vector(x, y, 0))) |
| 565 | else: |
| 566 | x, y = seg[3], seg[4] |
| 567 | edges.append(cq.Edge.makeThreePointArc(start, cq.Vector(seg[1], seg[2], 0), cq.Vector(x, y, 0))) |
| 568 | return cq.Wire.assembleEdges(edges) |
| 569 | |
| 570 | |
| 571 | loops = [loop_wire(loop) for loop in PROFILES[profile]] |
| 572 | section = cq.Face.makeFromWires(loops[0], loops[1:]) |
| 573 | body = cq.Workplane("XY").add(cq.Solid.extrudeLinear(section, cq.Vector(0, 0, length))) |
| 574 | |
| 575 | model = Model() |
| 576 | model.add("profile", body, name="Profile") |
| 577 | model.material("aluminum-generic", color=FINISHES[finish]) # 6063-T5 typical (no STEVE entry for 6063) |
| 578 | result = model.result() |
| 579 |
| 1 | name = "steve/t-slot-extrusion" |
| 2 | version = "2.0.0" |
| 3 | runtime = "steve" |
| 4 | license = "MIT" |
| 5 | summary = "T-slot aluminium extrusions with real cross-sections (2020, 2040, 3030, 3060, 4040, 4080; slot 5, 6, 8), any length." |
| 6 | description = """T-slot aluminium extrusion profiles with their real cross-sections, extruded to any length: 20 x 20 \ |
| 7 | B-type slot 6, 20 x 20 I-type slot 5, 20 x 20 item-compatible slot 5, 20 x 40 B-type slot 6, 30 x 30 B-type slot 8, \ |
| 8 | 30 x 30 Misumi HFS6 slot 8, 30 x 60 B-type slot 8, 40 x 40 light I-type slot 8 and 40 x 80 light I-type slot 8. |
| 9 | |
| 10 | Each section was measured from a published FreeCAD-library model (CC-BY-3.0; authors in the README); there is no \ |
| 11 | manufacturer drawing behind them. Centred on the origin in the XY plane (longer side along Y), extruded along +Z.""" |
| 12 | tags = ["profile", "extrusion", "aluminium", "t-slot", "2020", "3030", "4040", "frame", "metric"] |
| 13 | |
| 14 | [parameters.profile] |
| 15 | type = "choice" |
| 16 | default = "2020-B6" |
| 17 | choices = ["2020-B6", "2020-I5", "2020-I5-ISP", "2040-B6", "3030-B8", "3030-HFS6", "3060-B8", "4040L-I8", "4080L-I8"] |
| 18 | label = "Profile" |
| 19 | description = "Section and slot: 2020-B6 (20 x 20 B-type slot 6), 2020-I5 (I-type slot 5), 2020-I5-ISP (item-compatible slot 5), 2040-B6, 3030-B8, 3030-HFS6 (Misumi HFS6), 3060-B8, 4040L-I8 and 4080L-I8 (light I-type slot 8)." |
| 20 | |
| 21 | [parameters.length] |
| 22 | type = "number" |
| 23 | default = 100 |
| 24 | min = 5 |
| 25 | max = 6000 |
| 26 | unit = "mm" |
| 27 | label = "Length" |
| 28 | |
| 29 | [parameters.finish] |
| 30 | type = "choice" |
| 31 | default = "clear" |
| 32 | choices = ["clear", "black"] |
| 33 | label = "Anodising" |
| 34 |
| 1 | # Presets of this part (factory/PRESETS.md). Written by factory/gen.py. |
| 2 | |
| 3 | [[presets]] |
| 4 | id = "2020-B6-50" |
| 5 | title = "T-slot 20 × 20 B-type slot 6, 50 mm" |
| 6 | params = { profile = "2020-B6", length = 50 } |
| 7 | aliases = ["2020 B-type slot 6 50 mm", "20x20 slot 6 profile 50 mm", "2020 extrusion 50 mm", "20 x 20 extrusion 50 mm", "2020 B-type extrusion 50 mm"] |
| 8 | standard = "FreeCAD-library T-slot profile" |
| 9 | |
| 10 | [[presets]] |
| 11 | id = "2020-B6-100" |
| 12 | title = "T-slot 20 × 20 B-type slot 6, 100 mm" |
| 13 | params = { profile = "2020-B6", length = 100 } |
| 14 | aliases = ["2020 B-type slot 6 100 mm", "20x20 slot 6 profile 100 mm", "2020 extrusion 100 mm", "20 x 20 extrusion 100 mm", "2020 B-type extrusion 100 mm"] |
| 15 | standard = "FreeCAD-library T-slot profile" |
| 16 | |
| 17 | [[presets]] |
| 18 | id = "2020-B6-150" |
| 19 | title = "T-slot 20 × 20 B-type slot 6, 150 mm" |
| 20 | params = { profile = "2020-B6", length = 150 } |
| 21 | aliases = ["2020 B-type slot 6 150 mm", "20x20 slot 6 profile 150 mm", "2020 extrusion 150 mm", "20 x 20 extrusion 150 mm", "2020 B-type extrusion 150 mm"] |
| 22 | standard = "FreeCAD-library T-slot profile" |
| 23 | |
| 24 | [[presets]] |
| 25 | id = "2020-B6-200" |
| 26 | title = "T-slot 20 × 20 B-type slot 6, 200 mm" |
| 27 | params = { profile = "2020-B6", length = 200 } |
| 28 | aliases = ["2020 B-type slot 6 200 mm", "20x20 slot 6 profile 200 mm", "2020 extrusion 200 mm", "20 x 20 extrusion 200 mm", "2020 B-type extrusion 200 mm"] |
| 29 | standard = "FreeCAD-library T-slot profile" |
| 30 | |
| 31 | [[presets]] |
| 32 | id = "2020-B6-250" |
| 33 | title = "T-slot 20 × 20 B-type slot 6, 250 mm" |
| 34 | params = { profile = "2020-B6", length = 250 } |
| 35 | aliases = ["2020 B-type slot 6 250 mm", "20x20 slot 6 profile 250 mm", "2020 extrusion 250 mm", "20 x 20 extrusion 250 mm", "2020 B-type extrusion 250 mm"] |
| 36 | standard = "FreeCAD-library T-slot profile" |
| 37 | |
| 38 | [[presets]] |
| 39 | id = "2020-B6-300" |
| 40 | title = "T-slot 20 × 20 B-type slot 6, 300 mm" |
| 41 | params = { profile = "2020-B6", length = 300 } |
| 42 | aliases = ["2020 B-type slot 6 300 mm", "20x20 slot 6 profile 300 mm", "2020 extrusion 300 mm", "20 x 20 extrusion 300 mm", "2020 B-type extrusion 300 mm"] |
| 43 | standard = "FreeCAD-library T-slot profile" |
| 44 | |
| 45 | [[presets]] |
| 46 | id = "2020-B6-380" |
| 47 | title = "T-slot 20 × 20 B-type slot 6, 380 mm" |
| 48 | params = { profile = "2020-B6", length = 380 } |
| 49 | aliases = ["2020 B-type slot 6 380 mm", "20x20 slot 6 profile 380 mm", "2020 B-type slot-6 extrusion"] |
| 50 | standard = "FreeCAD-library T-slot profile" |
| 51 | |
| 52 | [[presets]] |
| 53 | id = "2020-B6-400" |
| 54 | title = "T-slot 20 × 20 B-type slot 6, 400 mm" |
| 55 | params = { profile = "2020-B6", length = 400 } |
| 56 | aliases = ["2020 B-type slot 6 400 mm", "20x20 slot 6 profile 400 mm", "2020 extrusion 400 mm", "20 x 20 extrusion 400 mm", "2020 B-type extrusion 400 mm"] |
| 57 | standard = "FreeCAD-library T-slot profile" |
| 58 | |
| 59 | [[presets]] |
| 60 | id = "2020-B6-500" |
| 61 | title = "T-slot 20 × 20 B-type slot 6, 500 mm" |
| 62 | params = { profile = "2020-B6", length = 500 } |
| 63 | aliases = ["2020 B-type slot 6 500 mm", "20x20 slot 6 profile 500 mm", "2020 extrusion 500 mm", "20 x 20 extrusion 500 mm", "2020 B-type extrusion 500 mm"] |
| 64 | standard = "FreeCAD-library T-slot profile" |
| 65 | |
| 66 | [[presets]] |
| 67 | id = "2020-B6-750" |
| 68 | title = "T-slot 20 × 20 B-type slot 6, 750 mm" |
| 69 | params = { profile = "2020-B6", length = 750 } |
| 70 | aliases = ["2020 B-type slot 6 750 mm", "20x20 slot 6 profile 750 mm", "2020 extrusion 750 mm", "20 x 20 extrusion 750 mm", "2020 B-type extrusion 750 mm"] |
| 71 | standard = "FreeCAD-library T-slot profile" |
| 72 | |
| 73 | [[presets]] |
| 74 | id = "2020-B6-1000" |
| 75 | title = "T-slot 20 × 20 B-type slot 6, 1000 mm" |
| 76 | params = { profile = "2020-B6", length = 1000 } |
| 77 | aliases = ["2020 B-type slot 6 1000 mm", "20x20 slot 6 profile 1000 mm", "2020 extrusion 1000 mm", "20 x 20 extrusion 1000 mm", "2020 B-type extrusion 1000 mm"] |
| 78 | standard = "FreeCAD-library T-slot profile" |
| 79 | |
| 80 | [[presets]] |
| 81 | id = "2020-B6-1500" |
| 82 | title = "T-slot 20 × 20 B-type slot 6, 1500 mm" |
| 83 | params = { profile = "2020-B6", length = 1500 } |
| 84 | aliases = ["2020 B-type slot 6 1500 mm", "20x20 slot 6 profile 1500 mm", "2020 extrusion 1500 mm", "20 x 20 extrusion 1500 mm", "2020 B-type extrusion 1500 mm"] |
| 85 | standard = "FreeCAD-library T-slot profile" |
| 86 | |
| 87 | [[presets]] |
| 88 | id = "2020-B6-2000" |
| 89 | title = "T-slot 20 × 20 B-type slot 6, 2000 mm" |
| 90 | params = { profile = "2020-B6", length = 2000 } |
| 91 | aliases = ["2020 B-type slot 6 2000 mm", "20x20 slot 6 profile 2000 mm", "2020 extrusion 2000 mm", "20 x 20 extrusion 2000 mm", "2020 B-type extrusion 2000 mm"] |
| 92 | standard = "FreeCAD-library T-slot profile" |
| 93 | |
| 94 | [[presets]] |
| 95 | id = "2020-I5-50" |
| 96 | title = "T-slot 20 × 20 I-type slot 5, 50 mm" |
| 97 | params = { profile = "2020-I5", length = 50 } |
| 98 | aliases = ["2020 I-type slot 5 50 mm", "20x20 slot 5 profile 50 mm", "2020 extrusion 50 mm", "20 x 20 extrusion 50 mm", "2020 I-type extrusion 50 mm"] |
| 99 | standard = "FreeCAD-library T-slot profile" |
| 100 | |
| 101 | [[presets]] |
| 102 | id = "2020-I5-100" |
| 103 | title = "T-slot 20 × 20 I-type slot 5, 100 mm" |
| 104 | params = { profile = "2020-I5", length = 100 } |
| 105 | aliases = ["2020 I-type slot 5 100 mm", "20x20 slot 5 profile 100 mm", "2020 extrusion 100 mm", "20 x 20 extrusion 100 mm", "2020 I-type extrusion 100 mm"] |
| 106 | standard = "FreeCAD-library T-slot profile" |
| 107 | |
| 108 | [[presets]] |
| 109 | id = "2020-I5-150" |
| 110 | title = "T-slot 20 × 20 I-type slot 5, 150 mm" |
| 111 | params = { profile = "2020-I5", length = 150 } |
| 112 | aliases = ["2020 I-type slot 5 150 mm", "20x20 slot 5 profile 150 mm", "2020 extrusion 150 mm", "20 x 20 extrusion 150 mm", "2020 I-type extrusion 150 mm"] |
| 113 | standard = "FreeCAD-library T-slot profile" |
| 114 | |
| 115 | [[presets]] |
| 116 | id = "2020-I5-200" |
| 117 | title = "T-slot 20 × 20 I-type slot 5, 200 mm" |
| 118 | params = { profile = "2020-I5", length = 200 } |
| 119 | aliases = ["2020 I-type slot 5 200 mm", "20x20 slot 5 profile 200 mm", "2020 I-type slot-5 extrusion", "T-slot 20 × 20 I-type slot 5, 200 mm", "2020 extrusion 200 mm", "20 x 20 extrusion 200 mm", "2020 I-type extrusion 200 mm"] |
| 120 | standard = "FreeCAD-library T-slot profile" |
| 121 | |
| 122 | [[presets]] |
| 123 | id = "2020-I5-250" |
| 124 | title = "T-slot 20 × 20 I-type slot 5, 250 mm" |
| 125 | params = { profile = "2020-I5", length = 250 } |
| 126 | aliases = ["2020 I-type slot 5 250 mm", "20x20 slot 5 profile 250 mm", "2020 extrusion 250 mm", "20 x 20 extrusion 250 mm", "2020 I-type extrusion 250 mm"] |
| 127 | standard = "FreeCAD-library T-slot profile" |
| 128 | |
| 129 | [[presets]] |
| 130 | id = "2020-I5-300" |
| 131 | title = "T-slot 20 × 20 I-type slot 5, 300 mm" |
| 132 | params = { profile = "2020-I5", length = 300 } |
| 133 | aliases = ["2020 I-type slot 5 300 mm", "20x20 slot 5 profile 300 mm", "2020 extrusion 300 mm", "20 x 20 extrusion 300 mm", "2020 I-type extrusion 300 mm"] |
| 134 | standard = "FreeCAD-library T-slot profile" |
| 135 | |
| 136 | [[presets]] |
| 137 | id = "2020-I5-400" |
| 138 | title = "T-slot 20 × 20 I-type slot 5, 400 mm" |
| 139 | params = { profile = "2020-I5", length = 400 } |
| 140 | aliases = ["2020 I-type slot 5 400 mm", "20x20 slot 5 profile 400 mm", "2020 extrusion 400 mm", "20 x 20 extrusion 400 mm", "2020 I-type extrusion 400 mm"] |
| 141 | standard = "FreeCAD-library T-slot profile" |
| 142 | |
| 143 | [[presets]] |
| 144 | id = "2020-I5-500" |
| 145 | title = "T-slot 20 × 20 I-type slot 5, 500 mm" |
| 146 | params = { profile = "2020-I5", length = 500 } |
| 147 | aliases = ["2020 I-type slot 5 500 mm", "20x20 slot 5 profile 500 mm", "2020 extrusion 500 mm", "20 x 20 extrusion 500 mm", "2020 I-type extrusion 500 mm"] |
| 148 | standard = "FreeCAD-library T-slot profile" |
| 149 | |
| 150 | [[presets]] |
| 151 | id = "2020-I5-750" |
| 152 | title = "T-slot 20 × 20 I-type slot 5, 750 mm" |
| 153 | params = { profile = "2020-I5", length = 750 } |
| 154 | aliases = ["2020 I-type slot 5 750 mm", "20x20 slot 5 profile 750 mm", "2020 extrusion 750 mm", "20 x 20 extrusion 750 mm", "2020 I-type extrusion 750 mm"] |
| 155 | standard = "FreeCAD-library T-slot profile" |
| 156 | |
| 157 | [[presets]] |
| 158 | id = "2020-I5-1000" |
| 159 | title = "T-slot 20 × 20 I-type slot 5, 1000 mm" |
| 160 | params = { profile = "2020-I5", length = 1000 } |
| 161 | aliases = ["2020 I-type slot 5 1000 mm", "20x20 slot 5 profile 1000 mm", "2020 extrusion 1000 mm", "20 x 20 extrusion 1000 mm", "2020 I-type extrusion 1000 mm"] |
| 162 | standard = "FreeCAD-library T-slot profile" |
| 163 | |
| 164 | [[presets]] |
| 165 | id = "2020-I5-1500" |
| 166 | title = "T-slot 20 × 20 I-type slot 5, 1500 mm" |
| 167 | params = { profile = "2020-I5", length = 1500 } |
| 168 | aliases = ["2020 I-type slot 5 1500 mm", "20x20 slot 5 profile 1500 mm", "2020 extrusion 1500 mm", "20 x 20 extrusion 1500 mm", "2020 I-type extrusion 1500 mm"] |
| 169 | standard = "FreeCAD-library T-slot profile" |
| 170 | |
| 171 | [[presets]] |
| 172 | id = "2020-I5-2000" |
| 173 | title = "T-slot 20 × 20 I-type slot 5, 2000 mm" |
| 174 | params = { profile = "2020-I5", length = 2000 } |
| 175 | aliases = ["2020 I-type slot 5 2000 mm", "20x20 slot 5 profile 2000 mm", "2020 extrusion 2000 mm", "20 x 20 extrusion 2000 mm", "2020 I-type extrusion 2000 mm"] |
| 176 | standard = "FreeCAD-library T-slot profile" |
| 177 | |
| 178 | [[presets]] |
| 179 | id = "2020-I5-ISP-10" |
| 180 | title = "T-slot 20 × 20 item-compatible slot 5, 10 mm" |
| 181 | params = { profile = "2020-I5-ISP", length = 10 } |
| 182 | aliases = ["item compatible 20x20 slot 5 10 mm", "ISP 20x20 10 mm"] |
| 183 | standard = "FreeCAD-library T-slot profile" |
| 184 | |
| 185 | [[presets]] |
| 186 | id = "2020-I5-ISP-50" |
| 187 | title = "T-slot 20 × 20 item-compatible slot 5, 50 mm" |
| 188 | params = { profile = "2020-I5-ISP", length = 50 } |
| 189 | aliases = ["item compatible 20x20 slot 5 50 mm", "ISP 20x20 50 mm", "2020 extrusion 50 mm", "20 x 20 extrusion 50 mm", "2020 I-type extrusion 50 mm"] |
| 190 | standard = "FreeCAD-library T-slot profile" |
| 191 | |
| 192 | [[presets]] |
| 193 | id = "2020-I5-ISP-100" |
| 194 | title = "T-slot 20 × 20 item-compatible slot 5, 100 mm" |
| 195 | params = { profile = "2020-I5-ISP", length = 100 } |
| 196 | aliases = ["item compatible 20x20 slot 5 100 mm", "ISP 20x20 100 mm", "2020 extrusion 100 mm", "20 x 20 extrusion 100 mm", "2020 I-type extrusion 100 mm"] |
| 197 | standard = "FreeCAD-library T-slot profile" |
| 198 | |
| 199 | [[presets]] |
| 200 | id = "2020-I5-ISP-150" |
| 201 | title = "T-slot 20 × 20 item-compatible slot 5, 150 mm" |
| 202 | params = { profile = "2020-I5-ISP", length = 150 } |
| 203 | aliases = ["item compatible 20x20 slot 5 150 mm", "ISP 20x20 150 mm", "2020 extrusion 150 mm", "20 x 20 extrusion 150 mm", "2020 I-type extrusion 150 mm"] |
| 204 | standard = "FreeCAD-library T-slot profile" |
| 205 | |
| 206 | [[presets]] |
| 207 | id = "2020-I5-ISP-200" |
| 208 | title = "T-slot 20 × 20 item-compatible slot 5, 200 mm" |
| 209 | params = { profile = "2020-I5-ISP", length = 200 } |
| 210 | aliases = ["item compatible 20x20 slot 5 200 mm", "ISP 20x20 200 mm", "2020 extrusion 200 mm", "20 x 20 extrusion 200 mm", "2020 I-type extrusion 200 mm"] |
| 211 | standard = "FreeCAD-library T-slot profile" |
| 212 | |
| 213 | [[presets]] |
| 214 | id = "2020-I5-ISP-250" |
| 215 | title = "T-slot 20 × 20 item-compatible slot 5, 250 mm" |
| 216 | params = { profile = "2020-I5-ISP", length = 250 } |
| 217 | aliases = ["item compatible 20x20 slot 5 250 mm", "ISP 20x20 250 mm", "2020 extrusion 250 mm", "20 x 20 extrusion 250 mm", "2020 I-type extrusion 250 mm"] |
| 218 | standard = "FreeCAD-library T-slot profile" |
| 219 | |
| 220 | [[presets]] |
| 221 | id = "2020-I5-ISP-300" |
| 222 | title = "T-slot 20 × 20 item-compatible slot 5, 300 mm" |
| 223 | params = { profile = "2020-I5-ISP", length = 300 } |
| 224 | aliases = ["item compatible 20x20 slot 5 300 mm", "ISP 20x20 300 mm", "2020 extrusion 300 mm", "20 x 20 extrusion 300 mm", "2020 I-type extrusion 300 mm"] |
| 225 | standard = "FreeCAD-library T-slot profile" |
| 226 | |
| 227 | [[presets]] |
| 228 | id = "2020-I5-ISP-400" |
| 229 | title = "T-slot 20 × 20 item-compatible slot 5, 400 mm" |
| 230 | params = { profile = "2020-I5-ISP", length = 400 } |
| 231 | aliases = ["item compatible 20x20 slot 5 400 mm", "ISP 20x20 400 mm", "2020 extrusion 400 mm", "20 x 20 extrusion 400 mm", "2020 I-type extrusion 400 mm"] |
| 232 | standard = "FreeCAD-library T-slot profile" |
| 233 | |
| 234 | [[presets]] |
| 235 | id = "2020-I5-ISP-500" |
| 236 | title = "T-slot 20 × 20 item-compatible slot 5, 500 mm" |
| 237 | params = { profile = "2020-I5-ISP", length = 500 } |
| 238 | aliases = ["item compatible 20x20 slot 5 500 mm", "ISP 20x20 500 mm", "2020 extrusion 500 mm", "20 x 20 extrusion 500 mm", "2020 I-type extrusion 500 mm"] |
| 239 | standard = "FreeCAD-library T-slot profile" |
| 240 | |
| 241 | [[presets]] |
| 242 | id = "2020-I5-ISP-750" |
| 243 | title = "T-slot 20 × 20 item-compatible slot 5, 750 mm" |
| 244 | params = { profile = "2020-I5-ISP", length = 750 } |
| 245 | aliases = ["item compatible 20x20 slot 5 750 mm", "ISP 20x20 750 mm", "2020 extrusion 750 mm", "20 x 20 extrusion 750 mm", "2020 I-type extrusion 750 mm"] |
| 246 | standard = "FreeCAD-library T-slot profile" |
| 247 | |
| 248 | [[presets]] |
| 249 | id = "2020-I5-ISP-1000" |
| 250 | title = "T-slot 20 × 20 item-compatible slot 5, 1000 mm" |
| 251 | params = { profile = "2020-I5-ISP", length = 1000 } |
| 252 | aliases = ["item compatible 20x20 slot 5 1000 mm", "ISP 20x20 1000 mm", "2020 extrusion 1000 mm", "20 x 20 extrusion 1000 mm", "2020 I-type extrusion 1000 mm"] |
| 253 | standard = "FreeCAD-library T-slot profile" |
| 254 | |
| 255 | [[presets]] |
| 256 | id = "2020-I5-ISP-1500" |
| 257 | title = "T-slot 20 × 20 item-compatible slot 5, 1500 mm" |
| 258 | params = { profile = "2020-I5-ISP", length = 1500 } |
| 259 | aliases = ["item compatible 20x20 slot 5 1500 mm", "ISP 20x20 1500 mm", "2020 extrusion 1500 mm", "20 x 20 extrusion 1500 mm", "2020 I-type extrusion 1500 mm"] |
| 260 | standard = "FreeCAD-library T-slot profile" |
| 261 | |
| 262 | [[presets]] |
| 263 | id = "2020-I5-ISP-2000" |
| 264 | title = "T-slot 20 × 20 item-compatible slot 5, 2000 mm" |
| 265 | params = { profile = "2020-I5-ISP", length = 2000 } |
| 266 | aliases = ["item compatible 20x20 slot 5 2000 mm", "ISP 20x20 2000 mm", "2020 extrusion 2000 mm", "20 x 20 extrusion 2000 mm", "2020 I-type extrusion 2000 mm"] |
| 267 | standard = "FreeCAD-library T-slot profile" |
| 268 | |
| 269 | [[presets]] |
| 270 | id = "2040-B6-50" |
| 271 | title = "T-slot 20 × 40 B-type slot 6, 50 mm" |
| 272 | params = { profile = "2040-B6", length = 50 } |
| 273 | aliases = ["2040 B-type slot 6 50 mm", "20x40 slot 6 profile 50 mm", "2040 extrusion 50 mm", "20 x 40 extrusion 50 mm", "2040 B-type extrusion 50 mm"] |
| 274 | standard = "FreeCAD-library T-slot profile" |
| 275 | |
| 276 | [[presets]] |
| 277 | id = "2040-B6-100" |
| 278 | title = "T-slot 20 × 40 B-type slot 6, 100 mm" |
| 279 | params = { profile = "2040-B6", length = 100 } |
| 280 | aliases = ["2040 B-type slot 6 100 mm", "20x40 slot 6 profile 100 mm", "2040 B-type slot-6 extrusion", "T-slot 20 × 40 B-type slot 6, 100 mm", "2040 extrusion 100 mm", "20 x 40 extrusion 100 mm", "2040 B-type extrusion 100 mm"] |
| 281 | standard = "FreeCAD-library T-slot profile" |
| 282 | |
| 283 | [[presets]] |
| 284 | id = "2040-B6-150" |
| 285 | title = "T-slot 20 × 40 B-type slot 6, 150 mm" |
| 286 | params = { profile = "2040-B6", length = 150 } |
| 287 | aliases = ["2040 B-type slot 6 150 mm", "20x40 slot 6 profile 150 mm", "2040 extrusion 150 mm", "20 x 40 extrusion 150 mm", "2040 B-type extrusion 150 mm"] |
| 288 | standard = "FreeCAD-library T-slot profile" |
| 289 | |
| 290 | [[presets]] |
| 291 | id = "2040-B6-200" |
| 292 | title = "T-slot 20 × 40 B-type slot 6, 200 mm" |
| 293 | params = { profile = "2040-B6", length = 200 } |
| 294 | aliases = ["2040 B-type slot 6 200 mm", "20x40 slot 6 profile 200 mm", "2040 extrusion 200 mm", "20 x 40 extrusion 200 mm", "2040 B-type extrusion 200 mm"] |
| 295 | standard = "FreeCAD-library T-slot profile" |
| 296 | |
| 297 | [[presets]] |
| 298 | id = "2040-B6-250" |
| 299 | title = "T-slot 20 × 40 B-type slot 6, 250 mm" |
| 300 | params = { profile = "2040-B6", length = 250 } |
| 301 | aliases = ["2040 B-type slot 6 250 mm", "20x40 slot 6 profile 250 mm", "2040 extrusion 250 mm", "20 x 40 extrusion 250 mm", "2040 B-type extrusion 250 mm"] |
| 302 | standard = "FreeCAD-library T-slot profile" |
| 303 | |
| 304 | [[presets]] |
| 305 | id = "2040-B6-300" |
| 306 | title = "T-slot 20 × 40 B-type slot 6, 300 mm" |
| 307 | params = { profile = "2040-B6", length = 300 } |
| 308 | aliases = ["2040 B-type slot 6 300 mm", "20x40 slot 6 profile 300 mm", "2040 extrusion 300 mm", "20 x 40 extrusion 300 mm", "2040 B-type extrusion 300 mm"] |
| 309 | standard = "FreeCAD-library T-slot profile" |
| 310 | |
| 311 | [[presets]] |
| 312 | id = "2040-B6-400" |
| 313 | title = "T-slot 20 × 40 B-type slot 6, 400 mm" |
| 314 | params = { profile = "2040-B6", length = 400 } |
| 315 | aliases = ["2040 B-type slot 6 400 mm", "20x40 slot 6 profile 400 mm", "2040 extrusion 400 mm", "20 x 40 extrusion 400 mm", "2040 B-type extrusion 400 mm"] |
| 316 | standard = "FreeCAD-library T-slot profile" |
| 317 | |
| 318 | [[presets]] |
| 319 | id = "2040-B6-500" |
| 320 | title = "T-slot 20 × 40 B-type slot 6, 500 mm" |
| 321 | params = { profile = "2040-B6", length = 500 } |
| 322 | aliases = ["2040 B-type slot 6 500 mm", "20x40 slot 6 profile 500 mm", "2040 extrusion 500 mm", "20 x 40 extrusion 500 mm", "2040 B-type extrusion 500 mm"] |
| 323 | standard = "FreeCAD-library T-slot profile" |
| 324 | |
| 325 | [[presets]] |
| 326 | id = "2040-B6-750" |
| 327 | title = "T-slot 20 × 40 B-type slot 6, 750 mm" |
| 328 | params = { profile = "2040-B6", length = 750 } |
| 329 | aliases = ["2040 B-type slot 6 750 mm", "20x40 slot 6 profile 750 mm", "2040 extrusion 750 mm", "20 x 40 extrusion 750 mm", "2040 B-type extrusion 750 mm"] |
| 330 | standard = "FreeCAD-library T-slot profile" |
| 331 | |
| 332 | [[presets]] |
| 333 | id = "2040-B6-1000" |
| 334 | title = "T-slot 20 × 40 B-type slot 6, 1000 mm" |
| 335 | params = { profile = "2040-B6", length = 1000 } |
| 336 | aliases = ["2040 B-type slot 6 1000 mm", "20x40 slot 6 profile 1000 mm", "2040 extrusion 1000 mm", "20 x 40 extrusion 1000 mm", "2040 B-type extrusion 1000 mm"] |
| 337 | standard = "FreeCAD-library T-slot profile" |
| 338 | |
| 339 | [[presets]] |
| 340 | id = "2040-B6-1500" |
| 341 | title = "T-slot 20 × 40 B-type slot 6, 1500 mm" |
| 342 | params = { profile = "2040-B6", length = 1500 } |
| 343 | aliases = ["2040 B-type slot 6 1500 mm", "20x40 slot 6 profile 1500 mm", "2040 extrusion 1500 mm", "20 x 40 extrusion 1500 mm", "2040 B-type extrusion 1500 mm"] |
| 344 | standard = "FreeCAD-library T-slot profile" |
| 345 | |
| 346 | [[presets]] |
| 347 | id = "2040-B6-2000" |
| 348 | title = "T-slot 20 × 40 B-type slot 6, 2000 mm" |
| 349 | params = { profile = "2040-B6", length = 2000 } |
| 350 | aliases = ["2040 B-type slot 6 2000 mm", "20x40 slot 6 profile 2000 mm", "2040 extrusion 2000 mm", "20 x 40 extrusion 2000 mm", "2040 B-type extrusion 2000 mm"] |
| 351 | standard = "FreeCAD-library T-slot profile" |
| 352 | |
| 353 | [[presets]] |
| 354 | id = "3030-B8-50" |
| 355 | title = "T-slot 30 × 30 B-type slot 8, 50 mm" |
| 356 | params = { profile = "3030-B8", length = 50 } |
| 357 | aliases = ["3030 B-type slot 8 50 mm", "30x30 slot 8 profile 50 mm", "3030 extrusion 50 mm", "30 x 30 extrusion 50 mm", "3030 B-type extrusion 50 mm"] |
| 358 | standard = "FreeCAD-library T-slot profile" |
| 359 | |
| 360 | [[presets]] |
| 361 | id = "3030-B8-100" |
| 362 | title = "T-slot 30 × 30 B-type slot 8, 100 mm" |
| 363 | params = { profile = "3030-B8", length = 100 } |
| 364 | aliases = ["3030 B-type slot 8 100 mm", "30x30 slot 8 profile 100 mm", "3030 B-type slot-8 extrusion", "T-slot 30 × 30 B-type slot 8, 100 mm", "3030 extrusion 100 mm", "30 x 30 extrusion 100 mm", "3030 B-type extrusion 100 mm"] |
| 365 | standard = "FreeCAD-library T-slot profile" |
| 366 | |
| 367 | [[presets]] |
| 368 | id = "3030-B8-150" |
| 369 | title = "T-slot 30 × 30 B-type slot 8, 150 mm" |
| 370 | params = { profile = "3030-B8", length = 150 } |
| 371 | aliases = ["3030 B-type slot 8 150 mm", "30x30 slot 8 profile 150 mm", "3030 extrusion 150 mm", "30 x 30 extrusion 150 mm", "3030 B-type extrusion 150 mm"] |
| 372 | standard = "FreeCAD-library T-slot profile" |
| 373 | |
| 374 | [[presets]] |
| 375 | id = "3030-B8-200" |
| 376 | title = "T-slot 30 × 30 B-type slot 8, 200 mm" |
| 377 | params = { profile = "3030-B8", length = 200 } |
| 378 | aliases = ["3030 B-type slot 8 200 mm", "30x30 slot 8 profile 200 mm", "3030 extrusion 200 mm", "30 x 30 extrusion 200 mm", "3030 B-type extrusion 200 mm"] |
| 379 | standard = "FreeCAD-library T-slot profile" |
| 380 | |
| 381 | [[presets]] |
| 382 | id = "3030-B8-250" |
| 383 | title = "T-slot 30 × 30 B-type slot 8, 250 mm" |
| 384 | params = { profile = "3030-B8", length = 250 } |
| 385 | aliases = ["3030 B-type slot 8 250 mm", "30x30 slot 8 profile 250 mm", "3030 extrusion 250 mm", "30 x 30 extrusion 250 mm", "3030 B-type extrusion 250 mm"] |
| 386 | standard = "FreeCAD-library T-slot profile" |
| 387 | |
| 388 | [[presets]] |
| 389 | id = "3030-B8-300" |
| 390 | title = "T-slot 30 × 30 B-type slot 8, 300 mm" |
| 391 | params = { profile = "3030-B8", length = 300 } |
| 392 | aliases = ["3030 B-type slot 8 300 mm", "30x30 slot 8 profile 300 mm", "3030 extrusion 300 mm", "30 x 30 extrusion 300 mm", "3030 B-type extrusion 300 mm"] |
| 393 | standard = "FreeCAD-library T-slot profile" |
| 394 | |
| 395 | [[presets]] |
| 396 | id = "3030-B8-400" |
| 397 | title = "T-slot 30 × 30 B-type slot 8, 400 mm" |
| 398 | params = { profile = "3030-B8", length = 400 } |
| 399 | aliases = ["3030 B-type slot 8 400 mm", "30x30 slot 8 profile 400 mm", "3030 extrusion 400 mm", "30 x 30 extrusion 400 mm", "3030 B-type extrusion 400 mm"] |
| 400 | standard = "FreeCAD-library T-slot profile" |
| 401 | |
| 402 | [[presets]] |
| 403 | id = "3030-B8-500" |
| 404 | title = "T-slot 30 × 30 B-type slot 8, 500 mm" |
| 405 | params = { profile = "3030-B8", length = 500 } |
| 406 | aliases = ["3030 B-type slot 8 500 mm", "30x30 slot 8 profile 500 mm", "3030 extrusion 500 mm", "30 x 30 extrusion 500 mm", "3030 B-type extrusion 500 mm"] |
| 407 | standard = "FreeCAD-library T-slot profile" |
| 408 | |
| 409 | [[presets]] |
| 410 | id = "3030-B8-750" |
| 411 | title = "T-slot 30 × 30 B-type slot 8, 750 mm" |
| 412 | params = { profile = "3030-B8", length = 750 } |
| 413 | aliases = ["3030 B-type slot 8 750 mm", "30x30 slot 8 profile 750 mm", "3030 extrusion 750 mm", "30 x 30 extrusion 750 mm", "3030 B-type extrusion 750 mm"] |
| 414 | standard = "FreeCAD-library T-slot profile" |
| 415 | |
| 416 | [[presets]] |
| 417 | id = "3030-B8-1000" |
| 418 | title = "T-slot 30 × 30 B-type slot 8, 1000 mm" |
| 419 | params = { profile = "3030-B8", length = 1000 } |
| 420 | aliases = ["3030 B-type slot 8 1000 mm", "30x30 slot 8 profile 1000 mm", "3030 extrusion 1000 mm", "30 x 30 extrusion 1000 mm", "3030 B-type extrusion 1000 mm"] |
| 421 | standard = "FreeCAD-library T-slot profile" |
| 422 | |
| 423 | [[presets]] |
| 424 | id = "3030-B8-1500" |
| 425 | title = "T-slot 30 × 30 B-type slot 8, 1500 mm" |
| 426 | params = { profile = "3030-B8", length = 1500 } |
| 427 | aliases = ["3030 B-type slot 8 1500 mm", "30x30 slot 8 profile 1500 mm", "3030 extrusion 1500 mm", "30 x 30 extrusion 1500 mm", "3030 B-type extrusion 1500 mm"] |
| 428 | standard = "FreeCAD-library T-slot profile" |
| 429 | |
| 430 | [[presets]] |
| 431 | id = "3030-B8-2000" |
| 432 | title = "T-slot 30 × 30 B-type slot 8, 2000 mm" |
| 433 | params = { profile = "3030-B8", length = 2000 } |
| 434 | aliases = ["3030 B-type slot 8 2000 mm", "30x30 slot 8 profile 2000 mm", "3030 extrusion 2000 mm", "30 x 30 extrusion 2000 mm", "3030 B-type extrusion 2000 mm"] |
| 435 | standard = "FreeCAD-library T-slot profile" |
| 436 | |
| 437 | [[presets]] |
| 438 | id = "3030-HFS6-50" |
| 439 | title = "T-slot 30 × 30 Misumi HFS6 slot 8, 50 mm" |
| 440 | params = { profile = "3030-HFS6", length = 50 } |
| 441 | aliases = ["Misumi HFS6-3030 50 mm", "HFS6 30x30 50 mm", "3030 extrusion 50 mm", "30 x 30 extrusion 50 mm"] |
| 442 | standard = "FreeCAD-library T-slot profile" |
| 443 | |
| 444 | [[presets]] |
| 445 | id = "3030-HFS6-100" |
| 446 | title = "T-slot 30 × 30 Misumi HFS6 slot 8, 100 mm" |
| 447 | params = { profile = "3030-HFS6", length = 100 } |
| 448 | aliases = ["Misumi HFS6-3030 100 mm", "HFS6 30x30 100 mm", "3030 extrusion 100 mm", "30 x 30 extrusion 100 mm"] |
| 449 | standard = "FreeCAD-library T-slot profile" |
| 450 | |
| 451 | [[presets]] |
| 452 | id = "3030-HFS6-150" |
| 453 | title = "T-slot 30 × 30 Misumi HFS6 slot 8, 150 mm" |
| 454 | params = { profile = "3030-HFS6", length = 150 } |
| 455 | aliases = ["Misumi HFS6-3030 150 mm", "HFS6 30x30 150 mm", "3030 extrusion 150 mm", "30 x 30 extrusion 150 mm"] |
| 456 | standard = "FreeCAD-library T-slot profile" |
| 457 | |
| 458 | [[presets]] |
| 459 | id = "3030-HFS6-200" |
| 460 | title = "T-slot 30 × 30 Misumi HFS6 slot 8, 200 mm" |
| 461 | params = { profile = "3030-HFS6", length = 200 } |
| 462 | aliases = ["Misumi HFS6-3030 200 mm", "HFS6 30x30 200 mm", "3030 extrusion 200 mm", "30 x 30 extrusion 200 mm"] |
| 463 | standard = "FreeCAD-library T-slot profile" |
| 464 | |
| 465 | [[presets]] |
| 466 | id = "3030-HFS6-250" |
| 467 | title = "T-slot 30 × 30 Misumi HFS6 slot 8, 250 mm" |
| 468 | params = { profile = "3030-HFS6", length = 250 } |
| 469 | aliases = ["Misumi HFS6-3030 250 mm", "HFS6 30x30 250 mm", "3030 extrusion 250 mm", "30 x 30 extrusion 250 mm"] |
| 470 | standard = "FreeCAD-library T-slot profile" |
| 471 | |
| 472 | [[presets]] |
| 473 | id = "3030-HFS6-300" |
| 474 | title = "T-slot 30 × 30 Misumi HFS6 slot 8, 300 mm" |
| 475 | params = { profile = "3030-HFS6", length = 300 } |
| 476 | aliases = ["Misumi HFS6-3030 300 mm", "HFS6 30x30 300 mm", "3030 extrusion 300 mm", "30 x 30 extrusion 300 mm"] |
| 477 | standard = "FreeCAD-library T-slot profile" |
| 478 | |
| 479 | [[presets]] |
| 480 | id = "3030-HFS6-400" |
| 481 | title = "T-slot 30 × 30 Misumi HFS6 slot 8, 400 mm" |
| 482 | params = { profile = "3030-HFS6", length = 400 } |
| 483 | aliases = ["Misumi HFS6-3030 400 mm", "HFS6 30x30 400 mm", "3030 extrusion 400 mm", "30 x 30 extrusion 400 mm"] |
| 484 | standard = "FreeCAD-library T-slot profile" |
| 485 | |
| 486 | [[presets]] |
| 487 | id = "3030-HFS6-500" |
| 488 | title = "T-slot 30 × 30 Misumi HFS6 slot 8, 500 mm" |
| 489 | params = { profile = "3030-HFS6", length = 500 } |
| 490 | aliases = ["Misumi HFS6-3030 500 mm", "HFS6 30x30 500 mm", "3030 extrusion 500 mm", "30 x 30 extrusion 500 mm"] |
| 491 | standard = "FreeCAD-library T-slot profile" |
| 492 | |
| 493 | [[presets]] |
| 494 | id = "3030-HFS6-750" |
| 495 | title = "T-slot 30 × 30 Misumi HFS6 slot 8, 750 mm" |
| 496 | params = { profile = "3030-HFS6", length = 750 } |
| 497 | aliases = ["Misumi HFS6-3030 750 mm", "HFS6 30x30 750 mm", "3030 extrusion 750 mm", "30 x 30 extrusion 750 mm"] |
| 498 | standard = "FreeCAD-library T-slot profile" |
| 499 | |
| 500 | [[presets]] |
| 501 | id = "3030-HFS6-1000" |
| 502 | title = "T-slot 30 × 30 Misumi HFS6 slot 8, 1000 mm" |
| 503 | params = { profile = "3030-HFS6", length = 1000 } |
| 504 | aliases = ["Misumi HFS6-3030 1000 mm", "HFS6 30x30 1000 mm", "3030 extrusion 1000 mm", "30 x 30 extrusion 1000 mm"] |
| 505 | standard = "FreeCAD-library T-slot profile" |
| 506 | |
| 507 | [[presets]] |
| 508 | id = "3030-HFS6-1500" |
| 509 | title = "T-slot 30 × 30 Misumi HFS6 slot 8, 1500 mm" |
| 510 | params = { profile = "3030-HFS6", length = 1500 } |
| 511 | aliases = ["Misumi HFS6-3030 1500 mm", "HFS6 30x30 1500 mm", "3030 extrusion 1500 mm", "30 x 30 extrusion 1500 mm"] |
| 512 | standard = "FreeCAD-library T-slot profile" |
| 513 | |
| 514 | [[presets]] |
| 515 | id = "3030-HFS6-2000" |
| 516 | title = "T-slot 30 × 30 Misumi HFS6 slot 8, 2000 mm" |
| 517 | params = { profile = "3030-HFS6", length = 2000 } |
| 518 | aliases = ["Misumi HFS6-3030 2000 mm", "HFS6 30x30 2000 mm", "3030 extrusion 2000 mm", "30 x 30 extrusion 2000 mm"] |
| 519 | standard = "FreeCAD-library T-slot profile" |
| 520 | |
| 521 | [[presets]] |
| 522 | id = "3060-B8-50" |
| 523 | title = "T-slot 30 × 60 B-type slot 8, 50 mm" |
| 524 | params = { profile = "3060-B8", length = 50 } |
| 525 | aliases = ["3060 B-type slot 8 50 mm", "30x60 slot 8 profile 50 mm", "3060 extrusion 50 mm", "30 x 60 extrusion 50 mm", "3060 B-type extrusion 50 mm"] |
| 526 | standard = "FreeCAD-library T-slot profile" |
| 527 | |
| 528 | [[presets]] |
| 529 | id = "3060-B8-100" |
| 530 | title = "T-slot 30 × 60 B-type slot 8, 100 mm" |
| 531 | params = { profile = "3060-B8", length = 100 } |
| 532 | aliases = ["3060 B-type slot 8 100 mm", "30x60 slot 8 profile 100 mm", "3060 B-type slot-8 extrusion", "T-slot 30 × 60 B-type slot 8, 100 mm", "3060 extrusion 100 mm", "30 x 60 extrusion 100 mm", "3060 B-type extrusion 100 mm"] |
| 533 | standard = "FreeCAD-library T-slot profile" |
| 534 | |
| 535 | [[presets]] |
| 536 | id = "3060-B8-150" |
| 537 | title = "T-slot 30 × 60 B-type slot 8, 150 mm" |
| 538 | params = { profile = "3060-B8", length = 150 } |
| 539 | aliases = ["3060 B-type slot 8 150 mm", "30x60 slot 8 profile 150 mm", "3060 extrusion 150 mm", "30 x 60 extrusion 150 mm", "3060 B-type extrusion 150 mm"] |
| 540 | standard = "FreeCAD-library T-slot profile" |
| 541 | |
| 542 | [[presets]] |
| 543 | id = "3060-B8-200" |
| 544 | title = "T-slot 30 × 60 B-type slot 8, 200 mm" |
| 545 | params = { profile = "3060-B8", length = 200 } |
| 546 | aliases = ["3060 B-type slot 8 200 mm", "30x60 slot 8 profile 200 mm", "3060 extrusion 200 mm", "30 x 60 extrusion 200 mm", "3060 B-type extrusion 200 mm"] |
| 547 | standard = "FreeCAD-library T-slot profile" |
| 548 | |
| 549 | [[presets]] |
| 550 | id = "3060-B8-250" |
| 551 | title = "T-slot 30 × 60 B-type slot 8, 250 mm" |
| 552 | params = { profile = "3060-B8", length = 250 } |
| 553 | aliases = ["3060 B-type slot 8 250 mm", "30x60 slot 8 profile 250 mm", "3060 extrusion 250 mm", "30 x 60 extrusion 250 mm", "3060 B-type extrusion 250 mm"] |
| 554 | standard = "FreeCAD-library T-slot profile" |
| 555 | |
| 556 | [[presets]] |
| 557 | id = "3060-B8-300" |
| 558 | title = "T-slot 30 × 60 B-type slot 8, 300 mm" |
| 559 | params = { profile = "3060-B8", length = 300 } |
| 560 | aliases = ["3060 B-type slot 8 300 mm", "30x60 slot 8 profile 300 mm", "3060 extrusion 300 mm", "30 x 60 extrusion 300 mm", "3060 B-type extrusion 300 mm"] |
| 561 | standard = "FreeCAD-library T-slot profile" |
| 562 | |
| 563 | [[presets]] |
| 564 | id = "3060-B8-400" |
| 565 | title = "T-slot 30 × 60 B-type slot 8, 400 mm" |
| 566 | params = { profile = "3060-B8", length = 400 } |
| 567 | aliases = ["3060 B-type slot 8 400 mm", "30x60 slot 8 profile 400 mm", "3060 extrusion 400 mm", "30 x 60 extrusion 400 mm", "3060 B-type extrusion 400 mm"] |
| 568 | standard = "FreeCAD-library T-slot profile" |
| 569 | |
| 570 | [[presets]] |
| 571 | id = "3060-B8-500" |
| 572 | title = "T-slot 30 × 60 B-type slot 8, 500 mm" |
| 573 | params = { profile = "3060-B8", length = 500 } |
| 574 | aliases = ["3060 B-type slot 8 500 mm", "30x60 slot 8 profile 500 mm", "3060 extrusion 500 mm", "30 x 60 extrusion 500 mm", "3060 B-type extrusion 500 mm"] |
| 575 | standard = "FreeCAD-library T-slot profile" |
| 576 | |
| 577 | [[presets]] |
| 578 | id = "3060-B8-750" |
| 579 | title = "T-slot 30 × 60 B-type slot 8, 750 mm" |
| 580 | params = { profile = "3060-B8", length = 750 } |
| 581 | aliases = ["3060 B-type slot 8 750 mm", "30x60 slot 8 profile 750 mm", "3060 extrusion 750 mm", "30 x 60 extrusion 750 mm", "3060 B-type extrusion 750 mm"] |
| 582 | standard = "FreeCAD-library T-slot profile" |
| 583 | |
| 584 | [[presets]] |
| 585 | id = "3060-B8-1000" |
| 586 | title = "T-slot 30 × 60 B-type slot 8, 1000 mm" |
| 587 | params = { profile = "3060-B8", length = 1000 } |
| 588 | aliases = ["3060 B-type slot 8 1000 mm", "30x60 slot 8 profile 1000 mm", "3060 extrusion 1000 mm", "30 x 60 extrusion 1000 mm", "3060 B-type extrusion 1000 mm"] |
| 589 | standard = "FreeCAD-library T-slot profile" |
| 590 | |
| 591 | [[presets]] |
| 592 | id = "3060-B8-1500" |
| 593 | title = "T-slot 30 × 60 B-type slot 8, 1500 mm" |
| 594 | params = { profile = "3060-B8", length = 1500 } |
| 595 | aliases = ["3060 B-type slot 8 1500 mm", "30x60 slot 8 profile 1500 mm", "3060 extrusion 1500 mm", "30 x 60 extrusion 1500 mm", "3060 B-type extrusion 1500 mm"] |
| 596 | standard = "FreeCAD-library T-slot profile" |
| 597 | |
| 598 | [[presets]] |
| 599 | id = "3060-B8-2000" |
| 600 | title = "T-slot 30 × 60 B-type slot 8, 2000 mm" |
| 601 | params = { profile = "3060-B8", length = 2000 } |
| 602 | aliases = ["3060 B-type slot 8 2000 mm", "30x60 slot 8 profile 2000 mm", "3060 extrusion 2000 mm", "30 x 60 extrusion 2000 mm", "3060 B-type extrusion 2000 mm"] |
| 603 | standard = "FreeCAD-library T-slot profile" |
| 604 | |
| 605 | [[presets]] |
| 606 | id = "4040L-I8-50" |
| 607 | title = "T-slot 40 × 40 light I-type slot 8, 50 mm" |
| 608 | params = { profile = "4040L-I8", length = 50 } |
| 609 | aliases = ["4040 light slot 8 50 mm", "40x40L profile 50 mm", "4040L extrusion 50 mm", "40 x 40 extrusion 50 mm", "4040L I-type extrusion 50 mm"] |
| 610 | standard = "FreeCAD-library T-slot profile" |
| 611 | |
| 612 | [[presets]] |
| 613 | id = "4040L-I8-100" |
| 614 | title = "T-slot 40 × 40 light I-type slot 8, 100 mm" |
| 615 | params = { profile = "4040L-I8", length = 100 } |
| 616 | aliases = ["4040 light slot 8 100 mm", "40x40L profile 100 mm", "4040L I-type slot-8 extrusion", "T-slot 40 × 40 light I-type slot 8, 100 mm", "4040L extrusion 100 mm", "40 x 40 extrusion 100 mm", "4040L I-type extrusion 100 mm"] |
| 617 | standard = "FreeCAD-library T-slot profile" |
| 618 | |
| 619 | [[presets]] |
| 620 | id = "4040L-I8-150" |
| 621 | title = "T-slot 40 × 40 light I-type slot 8, 150 mm" |
| 622 | params = { profile = "4040L-I8", length = 150 } |
| 623 | aliases = ["4040 light slot 8 150 mm", "40x40L profile 150 mm", "4040L extrusion 150 mm", "40 x 40 extrusion 150 mm", "4040L I-type extrusion 150 mm"] |
| 624 | standard = "FreeCAD-library T-slot profile" |
| 625 | |
| 626 | [[presets]] |
| 627 | id = "4040L-I8-200" |
| 628 | title = "T-slot 40 × 40 light I-type slot 8, 200 mm" |
| 629 | params = { profile = "4040L-I8", length = 200 } |
| 630 | aliases = ["4040 light slot 8 200 mm", "40x40L profile 200 mm", "4040L extrusion 200 mm", "40 x 40 extrusion 200 mm", "4040L I-type extrusion 200 mm"] |
| 631 | standard = "FreeCAD-library T-slot profile" |
| 632 | |
| 633 | [[presets]] |
| 634 | id = "4040L-I8-250" |
| 635 | title = "T-slot 40 × 40 light I-type slot 8, 250 mm" |
| 636 | params = { profile = "4040L-I8", length = 250 } |
| 637 | aliases = ["4040 light slot 8 250 mm", "40x40L profile 250 mm", "4040L extrusion 250 mm", "40 x 40 extrusion 250 mm", "4040L I-type extrusion 250 mm"] |
| 638 | standard = "FreeCAD-library T-slot profile" |
| 639 | |
| 640 | [[presets]] |
| 641 | id = "4040L-I8-300" |
| 642 | title = "T-slot 40 × 40 light I-type slot 8, 300 mm" |
| 643 | params = { profile = "4040L-I8", length = 300 } |
| 644 | aliases = ["4040 light slot 8 300 mm", "40x40L profile 300 mm", "4040L extrusion 300 mm", "40 x 40 extrusion 300 mm", "4040L I-type extrusion 300 mm"] |
| 645 | standard = "FreeCAD-library T-slot profile" |
| 646 | |
| 647 | [[presets]] |
| 648 | id = "4040L-I8-400" |
| 649 | title = "T-slot 40 × 40 light I-type slot 8, 400 mm" |
| 650 | params = { profile = "4040L-I8", length = 400 } |
| 651 | aliases = ["4040 light slot 8 400 mm", "40x40L profile 400 mm", "4040L extrusion 400 mm", "40 x 40 extrusion 400 mm", "4040L I-type extrusion 400 mm"] |
| 652 | standard = "FreeCAD-library T-slot profile" |
| 653 | |
| 654 | [[presets]] |
| 655 | id = "4040L-I8-500" |
| 656 | title = "T-slot 40 × 40 light I-type slot 8, 500 mm" |
| 657 | params = { profile = "4040L-I8", length = 500 } |
| 658 | aliases = ["4040 light slot 8 500 mm", "40x40L profile 500 mm", "4040L extrusion 500 mm", "40 x 40 extrusion 500 mm", "4040L I-type extrusion 500 mm"] |
| 659 | standard = "FreeCAD-library T-slot profile" |
| 660 | |
| 661 | [[presets]] |
| 662 | id = "4040L-I8-750" |
| 663 | title = "T-slot 40 × 40 light I-type slot 8, 750 mm" |
| 664 | params = { profile = "4040L-I8", length = 750 } |
| 665 | aliases = ["4040 light slot 8 750 mm", "40x40L profile 750 mm", "4040L extrusion 750 mm", "40 x 40 extrusion 750 mm", "4040L I-type extrusion 750 mm"] |
| 666 | standard = "FreeCAD-library T-slot profile" |
| 667 | |
| 668 | [[presets]] |
| 669 | id = "4040L-I8-1000" |
| 670 | title = "T-slot 40 × 40 light I-type slot 8, 1000 mm" |
| 671 | params = { profile = "4040L-I8", length = 1000 } |
| 672 | aliases = ["4040 light slot 8 1000 mm", "40x40L profile 1000 mm", "4040L extrusion 1000 mm", "40 x 40 extrusion 1000 mm", "4040L I-type extrusion 1000 mm"] |
| 673 | standard = "FreeCAD-library T-slot profile" |
| 674 | |
| 675 | [[presets]] |
| 676 | id = "4040L-I8-1500" |
| 677 | title = "T-slot 40 × 40 light I-type slot 8, 1500 mm" |
| 678 | params = { profile = "4040L-I8", length = 1500 } |
| 679 | aliases = ["4040 light slot 8 1500 mm", "40x40L profile 1500 mm", "4040L extrusion 1500 mm", "40 x 40 extrusion 1500 mm", "4040L I-type extrusion 1500 mm"] |
| 680 | standard = "FreeCAD-library T-slot profile" |
| 681 | |
| 682 | [[presets]] |
| 683 | id = "4040L-I8-2000" |
| 684 | title = "T-slot 40 × 40 light I-type slot 8, 2000 mm" |
| 685 | params = { profile = "4040L-I8", length = 2000 } |
| 686 | aliases = ["4040 light slot 8 2000 mm", "40x40L profile 2000 mm", "4040L extrusion 2000 mm", "40 x 40 extrusion 2000 mm", "4040L I-type extrusion 2000 mm"] |
| 687 | standard = "FreeCAD-library T-slot profile" |
| 688 | |
| 689 | [[presets]] |
| 690 | id = "4080L-I8-50" |
| 691 | title = "T-slot 40 × 80 light I-type slot 8, 50 mm" |
| 692 | params = { profile = "4080L-I8", length = 50 } |
| 693 | aliases = ["4080 light slot 8 50 mm", "40x80L profile 50 mm", "4080L extrusion 50 mm", "40 x 80 extrusion 50 mm", "4080L I-type extrusion 50 mm"] |
| 694 | standard = "FreeCAD-library T-slot profile" |
| 695 | |
| 696 | [[presets]] |
| 697 | id = "4080L-I8-100" |
| 698 | title = "T-slot 40 × 80 light I-type slot 8, 100 mm" |
| 699 | params = { profile = "4080L-I8", length = 100 } |
| 700 | aliases = ["4080 light slot 8 100 mm", "40x80L profile 100 mm", "4080L I-type slot-8 extrusion", "T-slot 40 × 80 light I-type slot 8, 100 mm", "4080L extrusion 100 mm", "40 x 80 extrusion 100 mm", "4080L I-type extrusion 100 mm"] |
| 701 | standard = "FreeCAD-library T-slot profile" |
| 702 | |
| 703 | [[presets]] |
| 704 | id = "4080L-I8-150" |
| 705 | title = "T-slot 40 × 80 light I-type slot 8, 150 mm" |
| 706 | params = { profile = "4080L-I8", length = 150 } |
| 707 | aliases = ["4080 light slot 8 150 mm", "40x80L profile 150 mm", "4080L extrusion 150 mm", "40 x 80 extrusion 150 mm", "4080L I-type extrusion 150 mm"] |
| 708 | standard = "FreeCAD-library T-slot profile" |
| 709 | |
| 710 | [[presets]] |
| 711 | id = "4080L-I8-200" |
| 712 | title = "T-slot 40 × 80 light I-type slot 8, 200 mm" |
| 713 | params = { profile = "4080L-I8", length = 200 } |
| 714 | aliases = ["4080 light slot 8 200 mm", "40x80L profile 200 mm", "4080L extrusion 200 mm", "40 x 80 extrusion 200 mm", "4080L I-type extrusion 200 mm"] |
| 715 | standard = "FreeCAD-library T-slot profile" |
| 716 | |
| 717 | [[presets]] |
| 718 | id = "4080L-I8-250" |
| 719 | title = "T-slot 40 × 80 light I-type slot 8, 250 mm" |
| 720 | params = { profile = "4080L-I8", length = 250 } |
| 721 | aliases = ["4080 light slot 8 250 mm", "40x80L profile 250 mm", "4080L extrusion 250 mm", "40 x 80 extrusion 250 mm", "4080L I-type extrusion 250 mm"] |
| 722 | standard = "FreeCAD-library T-slot profile" |
| 723 | |
| 724 | [[presets]] |
| 725 | id = "4080L-I8-300" |
| 726 | title = "T-slot 40 × 80 light I-type slot 8, 300 mm" |
| 727 | params = { profile = "4080L-I8", length = 300 } |
| 728 | aliases = ["4080 light slot 8 300 mm", "40x80L profile 300 mm", "4080L extrusion 300 mm", "40 x 80 extrusion 300 mm", "4080L I-type extrusion 300 mm"] |
| 729 | standard = "FreeCAD-library T-slot profile" |
| 730 | |
| 731 | [[presets]] |
| 732 | id = "4080L-I8-400" |
| 733 | title = "T-slot 40 × 80 light I-type slot 8, 400 mm" |
| 734 | params = { profile = "4080L-I8", length = 400 } |
| 735 | aliases = ["4080 light slot 8 400 mm", "40x80L profile 400 mm", "4080L extrusion 400 mm", "40 x 80 extrusion 400 mm", "4080L I-type extrusion 400 mm"] |
| 736 | standard = "FreeCAD-library T-slot profile" |
| 737 | |
| 738 | [[presets]] |
| 739 | id = "4080L-I8-500" |
| 740 | title = "T-slot 40 × 80 light I-type slot 8, 500 mm" |
| 741 | params = { profile = "4080L-I8", length = 500 } |
| 742 | aliases = ["4080 light slot 8 500 mm", "40x80L profile 500 mm", "4080L extrusion 500 mm", "40 x 80 extrusion 500 mm", "4080L I-type extrusion 500 mm"] |
| 743 | standard = "FreeCAD-library T-slot profile" |
| 744 | |
| 745 | [[presets]] |
| 746 | id = "4080L-I8-750" |
| 747 | title = "T-slot 40 × 80 light I-type slot 8, 750 mm" |
| 748 | params = { profile = "4080L-I8", length = 750 } |
| 749 | aliases = ["4080 light slot 8 750 mm", "40x80L profile 750 mm", "4080L extrusion 750 mm", "40 x 80 extrusion 750 mm", "4080L I-type extrusion 750 mm"] |
| 750 | standard = "FreeCAD-library T-slot profile" |
| 751 | |
| 752 | [[presets]] |
| 753 | id = "4080L-I8-1000" |
| 754 | title = "T-slot 40 × 80 light I-type slot 8, 1000 mm" |
| 755 | params = { profile = "4080L-I8", length = 1000 } |
| 756 | aliases = ["4080 light slot 8 1000 mm", "40x80L profile 1000 mm", "4080L extrusion 1000 mm", "40 x 80 extrusion 1000 mm", "4080L I-type extrusion 1000 mm"] |
| 757 | standard = "FreeCAD-library T-slot profile" |
| 758 | |
| 759 | [[presets]] |
| 760 | id = "4080L-I8-1500" |
| 761 | title = "T-slot 40 × 80 light I-type slot 8, 1500 mm" |
| 762 | params = { profile = "4080L-I8", length = 1500 } |
| 763 | aliases = ["4080 light slot 8 1500 mm", "40x80L profile 1500 mm", "4080L extrusion 1500 mm", "40 x 80 extrusion 1500 mm", "4080L I-type extrusion 1500 mm"] |
| 764 | standard = "FreeCAD-library T-slot profile" |
| 765 | |
| 766 | [[presets]] |
| 767 | id = "4080L-I8-2000" |
| 768 | title = "T-slot 40 × 80 light I-type slot 8, 2000 mm" |
| 769 | params = { profile = "4080L-I8", length = 2000 } |
| 770 | aliases = ["4080 light slot 8 2000 mm", "40x80L profile 2000 mm", "4080L extrusion 2000 mm", "40 x 80 extrusion 2000 mm", "4080L I-type extrusion 2000 mm"] |
| 771 | standard = "FreeCAD-library T-slot profile" |
| 772 |
T-slot extrusion
T-slot aluminium extrusion profiles with their real cross-sections, any length. Nine sections of the common 20, 30 and 40 mm series.
profile |
Section | Slot | Area, mm² | Reference model |
|---|---|---|---|---|
2020-B6 |
20 × 20 | B-type, 6 | 174.34 | Profile-20x20-B-Type_Slot6_A |
2020-I5 |
20 × 20 | I-type, 5 | 171.99 | Profile-20x20-I-Type_Slot5 |
2020-I5-ISP |
20 × 20 | item-compatible, 5 | 181.70 | Profile_20x20_I_Type_Slot5 (Item_Compatible_Profiles) |
2040-B6 |
20 × 40 | B-type, 6 | 286.73 | Profile-20x40-B-Type_Slot6 |
3030-B8 |
30 × 30 | B-type, 8 | 313.82 | Profile-30x30-B-Type_Slot8 |
3030-HFS6 |
30 × 30 | Misumi HFS6, 8 | 335.11 | misumi_profile_hfs_serie6_w8_30x30 |
3060-B8 |
30 × 60 | B-type, 8 | 552.58 | Profile-30x60-B-Type_Slot8 |
4040L-I8 |
40 × 40 light | I-type, 8 | 657.01 | Profile-40x40L-I-Type_Slot8 |
4080L-I8 |
40 × 80 light | I-type, 8 | 1133.45 | Profile-40x80L-I-Type_Slot8-Body |
Geometry
Each section is centred on the origin in the XY plane, its longer side along Y, and extruded along +Z by length.
The section is the reference model's own outline at mid-length, written in the recipe as a table (PROFILES, in
part.py): loops of lines and arcs (each arc by its two ends and its midpoint), the outside first, then the cavities
and bores.
Parameters
| Parameter | Meaning |
|---|---|
profile |
the section (table above) |
length |
mm |
finish |
anodising colour, clear or black (appearance only) |
Sources
There is no manufacturer drawing behind these sections: the geometry was measured from the published reference models below. Each model's cross-section was cut at mid-length with OCCT and every edge read exactly (line ends; each arc's ends and midpoint), centred on the section's bounding box and rounded to 0.0001 mm; the recipe re-draws those outlines in its own code. Every preset is checked against its own reference model (the catalogue entry it comes from): bounding box within 0.05 mm (0.5 % over 100 mm), volume within 2 %, section area within 2 % and the section outline within 0.1 mm of the model's.
All models are from FreeCAD-library (https://github.com/FreeCAD/FreeCAD-library, commit 2e36ae32), licensed under
CC-BY-3.0 (the library's licence for all its parts), and distributed by
step.parts (https://www.step.parts, entries profile_*, identical geometry; its length variants *_l50 to *_l2000
are the same sections). No endorsement by the authors or the FreeCAD project is implied.
Mechanical Parts/Profiles EN/Generic/Profile-20x20-B-Type_Slot6_A.step,Profile-20x20-I-Type_Slot5.step,Profile-20x40-B-Type_Slot6.step,Profile-30x30-B-Type_Slot8.step,Profile-30x60-B-Type_Slot8.step,Profile-40x40L-I-Type_Slot8.step,Profile-40x80L-I-Type_Slot8-Body.step: by mathis (GitHub Int-Circuit).Mechanical Parts/Profiles EN/Item_Compatible_Profiles/Profile_20x20_I_Type_Slot5.stp: by Stefan Katerkamp.Mechanical Parts/Profiles EN/Misumi_profiles/misumi_profile_hfs_serie6_w8_30x30.step: by Felipe Machado.
Simplifications: the 40 × 80 model's eight spline edges are drawn as 16 chords each (within 0.01 mm); otherwise none beyond the models' own (no end threads). The B-type and I-type models are generic sections of those slot systems; makers' sections differ in detail, so check a specific maker's drawing where it matters.
The catalogue's tslot_*_l0600 entries are step.parts' simplified stand-ins (a rectangle with one rectangular groove
per face), not T-slot sections, and are not presets. Preset list: from the step.parts catalogue (MIT), see
library/NOTICE.md; entries without a length (the base models) are presets at the model's own length.
| 1 | # T-slot extrusion |
| 2 | |
| 3 | T-slot aluminium extrusion profiles with their real cross-sections, any length. Nine sections of the common 20, 30 |
| 4 | and 40 mm series. |
| 5 | |
| 6 | | `profile` | Section | Slot | Area, mm² | Reference model | |
| 7 | |---|---|---|---|---| |
| 8 | | `2020-B6` | 20 × 20 | B-type, 6 | 174.34 | Profile-20x20-B-Type_Slot6_A | |
| 9 | | `2020-I5` | 20 × 20 | I-type, 5 | 171.99 | Profile-20x20-I-Type_Slot5 | |
| 10 | | `2020-I5-ISP` | 20 × 20 | item-compatible, 5 | 181.70 | Profile_20x20_I_Type_Slot5 (Item_Compatible_Profiles) | |
| 11 | | `2040-B6` | 20 × 40 | B-type, 6 | 286.73 | Profile-20x40-B-Type_Slot6 | |
| 12 | | `3030-B8` | 30 × 30 | B-type, 8 | 313.82 | Profile-30x30-B-Type_Slot8 | |
| 13 | | `3030-HFS6` | 30 × 30 | Misumi HFS6, 8 | 335.11 | misumi_profile_hfs_serie6_w8_30x30 | |
| 14 | | `3060-B8` | 30 × 60 | B-type, 8 | 552.58 | Profile-30x60-B-Type_Slot8 | |
| 15 | | `4040L-I8` | 40 × 40 light | I-type, 8 | 657.01 | Profile-40x40L-I-Type_Slot8 | |
| 16 | | `4080L-I8` | 40 × 80 light | I-type, 8 | 1133.45 | Profile-40x80L-I-Type_Slot8-Body | |
| 17 | |
| 18 | ## Geometry |
| 19 | |
| 20 | Each section is centred on the origin in the XY plane, its longer side along Y, and extruded along +Z by `length`. |
| 21 | The section is the reference model's own outline at mid-length, written in the recipe as a table (`PROFILES`, in |
| 22 | `part.py`): loops of lines and arcs (each arc by its two ends and its midpoint), the outside first, then the cavities |
| 23 | and bores. |
| 24 | |
| 25 | ## Parameters |
| 26 | |
| 27 | | Parameter | Meaning | |
| 28 | |---|---| |
| 29 | | `profile` | the section (table above) | |
| 30 | | `length` | mm | |
| 31 | | `finish` | anodising colour, `clear` or `black` (appearance only) | |
| 32 | |
| 33 | ## Sources |
| 34 | |
| 35 | There is no manufacturer drawing behind these sections: **the geometry was measured from the published reference |
| 36 | models** below. Each model's cross-section was cut at mid-length with OCCT and every edge read exactly (line ends; |
| 37 | each arc's ends and midpoint), centred on the section's bounding box and rounded to 0.0001 mm; the recipe re-draws |
| 38 | those outlines in its own code. Every preset is checked against its own reference model (the catalogue entry it comes |
| 39 | from): bounding box within 0.05 mm (0.5 % over 100 mm), volume within 2 %, section area within 2 % and the section |
| 40 | outline within 0.1 mm of the model's. |
| 41 | |
| 42 | All models are from **FreeCAD-library** (https://github.com/FreeCAD/FreeCAD-library, commit 2e36ae32), licensed under |
| 43 | [CC-BY-3.0](https://creativecommons.org/licenses/by/3.0/) (the library's licence for all its parts), and distributed by |
| 44 | step.parts (https://www.step.parts, entries `profile_*`, identical geometry; its length variants `*_l50` to `*_l2000` |
| 45 | are the same sections). No endorsement by the authors or the FreeCAD project is implied. |
| 46 | |
| 47 | - `Mechanical Parts/Profiles EN/Generic/Profile-20x20-B-Type_Slot6_A.step`, `Profile-20x20-I-Type_Slot5.step`, |
| 48 | `Profile-20x40-B-Type_Slot6.step`, `Profile-30x30-B-Type_Slot8.step`, `Profile-30x60-B-Type_Slot8.step`, |
| 49 | `Profile-40x40L-I-Type_Slot8.step`, `Profile-40x80L-I-Type_Slot8-Body.step`: by **mathis** (GitHub Int-Circuit). |
| 50 | - `Mechanical Parts/Profiles EN/Item_Compatible_Profiles/Profile_20x20_I_Type_Slot5.stp`: by **Stefan Katerkamp**. |
| 51 | - `Mechanical Parts/Profiles EN/Misumi_profiles/misumi_profile_hfs_serie6_w8_30x30.step`: by **Felipe Machado**. |
| 52 | |
| 53 | Simplifications: the 40 × 80 model's eight spline edges are drawn as 16 chords each (within 0.01 mm); otherwise none |
| 54 | beyond the models' own (no end threads). The B-type and I-type models are generic sections of those slot systems; |
| 55 | makers' sections differ in detail, so check a specific maker's drawing where it matters. |
| 56 | |
| 57 | The catalogue's `tslot_*_l0600` entries are step.parts' simplified stand-ins (a rectangle with one rectangular groove |
| 58 | per face), not T-slot sections, and are not presets. Preset list: from the step.parts catalogue (MIT), see |
| 59 | `library/NOTICE.md`; entries without a length (the base models) are presets at the model's own length. |
| 60 |
T-slot aluminium extrusion profiles with their real cross-sections, extruded to any length: 20 x 20 B-type slot 6, 20 x 20 I-type slot 5, 20 x 20 item-compatible slot 5, 20 x 40 B-type slot 6, 30 x 30 B-type slot 8, 30 x 30 Misumi HFS6 slot 8, 30 x 60 B-type slot 8, 40 x 40 light I-type slot 8 and 40 x 80 light I-type slot 8. Each section was measured from a published FreeCAD-library model (CC-BY-3.0; authors in the README); there is no manufacturer drawing behind them. Centred on the origin in the XY plane (longer side along Y), extruded along +Z.
T-slot extrusion
T-slot aluminium extrusion profiles with their real cross-sections, any length. Nine sections of the common 20, 30 and 40 mm series.
profile |
Section | Slot | Area, mm² | Reference model |
|---|---|---|---|---|
2020-B6 |
20 × 20 | B-type, 6 | 174.34 | Profile-20x20-B-Type_Slot6_A |
2020-I5 |
20 × 20 | I-type, 5 | 171.99 | Profile-20x20-I-Type_Slot5 |
2020-I5-ISP |
20 × 20 | item-compatible, 5 | 181.70 | Profile_20x20_I_Type_Slot5 (Item_Compatible_Profiles) |
2040-B6 |
20 × 40 | B-type, 6 | 286.73 | Profile-20x40-B-Type_Slot6 |
3030-B8 |
30 × 30 | B-type, 8 | 313.82 | Profile-30x30-B-Type_Slot8 |
3030-HFS6 |
30 × 30 | Misumi HFS6, 8 | 335.11 | misumi_profile_hfs_serie6_w8_30x30 |
3060-B8 |
30 × 60 | B-type, 8 | 552.58 | Profile-30x60-B-Type_Slot8 |
4040L-I8 |
40 × 40 light | I-type, 8 | 657.01 | Profile-40x40L-I-Type_Slot8 |
4080L-I8 |
40 × 80 light | I-type, 8 | 1133.45 | Profile-40x80L-I-Type_Slot8-Body |
Geometry
Each section is centred on the origin in the XY plane, its longer side along Y, and extruded along +Z by length.
The section is the reference model's own outline at mid-length, written in the recipe as a table (PROFILES, in
part.py): loops of lines and arcs (each arc by its two ends and its midpoint), the outside first, then the cavities
and bores.
Parameters
| Parameter | Meaning |
|---|---|
profile |
the section (table above) |
length |
mm |
finish |
anodising colour, clear or black (appearance only) |
Sources
There is no manufacturer drawing behind these sections: the geometry was measured from the published reference models below. Each model's cross-section was cut at mid-length with OCCT and every edge read exactly (line ends; each arc's ends and midpoint), centred on the section's bounding box and rounded to 0.0001 mm; the recipe re-draws those outlines in its own code. Every preset is checked against its own reference model (the catalogue entry it comes from): bounding box within 0.05 mm (0.5 % over 100 mm), volume within 2 %, section area within 2 % and the section outline within 0.1 mm of the model's.
All models are from FreeCAD-library (https://github.com/FreeCAD/FreeCAD-library, commit 2e36ae32), licensed under
CC-BY-3.0 (the library's licence for all its parts), and distributed by
step.parts (https://www.step.parts, entries profile_*, identical geometry; its length variants *_l50 to *_l2000
are the same sections). No endorsement by the authors or the FreeCAD project is implied.
Mechanical Parts/Profiles EN/Generic/Profile-20x20-B-Type_Slot6_A.step,Profile-20x20-I-Type_Slot5.step,Profile-20x40-B-Type_Slot6.step,Profile-30x30-B-Type_Slot8.step,Profile-30x60-B-Type_Slot8.step,Profile-40x40L-I-Type_Slot8.step,Profile-40x80L-I-Type_Slot8-Body.step: by mathis (GitHub Int-Circuit).Mechanical Parts/Profiles EN/Item_Compatible_Profiles/Profile_20x20_I_Type_Slot5.stp: by Stefan Katerkamp.Mechanical Parts/Profiles EN/Misumi_profiles/misumi_profile_hfs_serie6_w8_30x30.step: by Felipe Machado.
Simplifications: the 40 × 80 model's eight spline edges are drawn as 16 chords each (within 0.01 mm); otherwise none beyond the models' own (no end threads). The B-type and I-type models are generic sections of those slot systems; makers' sections differ in detail, so check a specific maker's drawing where it matters.
The catalogue's tslot_*_l0600 entries are step.parts' simplified stand-ins (a rectangle with one rectangular groove
per face), not T-slot sections, and are not presets. Preset list: from the step.parts catalogue (MIT), see
library/NOTICE.md; entries without a length (the base models) are presets at the model's own length.
-
-
Materials and finishes: each part is made of its standard's engineering material, with its usual finish.
-
1.0.0 Yanked
Yanked: Superseded by pythonparts/t-slot-extrusion and pythonparts/v-slot-extrusion: the real measured profiles, not a simplified one.
Related parts
More #profile
STEVEMIT
steve/v-slot-extrusion
20 x 20 V-slot aluminium extrusion, any length, measured from the published FreeCAD-library model.
STEVEMIT
steve/makerbeam-profile
MakerBeam 10 x 10 mm aluminium profile, any length, from MakerBeam's own drawing.
STEVEMIT
steve/extrusion-accessory
T-slot extrusion accessories (end cap, cover strip, anchor fastener, inside corner connector), 20/30/40 series: simplified.