# Presets of this part (factory/PRESETS.md). Written by factory/gen.py.

[[presets]]
id = "2020-B6-50"
title = "T-slot 20 × 20 B-type slot 6, 50 mm"
params = { profile = "2020-B6", length = 50 }
aliases = ["2020 B-type slot 6 50 mm", "20x20 slot 6 profile 50 mm", "2020 extrusion 50 mm", "20 x 20 extrusion 50 mm", "2020 B-type extrusion 50 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2020-B6-100"
title = "T-slot 20 × 20 B-type slot 6, 100 mm"
params = { profile = "2020-B6", length = 100 }
aliases = ["2020 B-type slot 6 100 mm", "20x20 slot 6 profile 100 mm", "2020 extrusion 100 mm", "20 x 20 extrusion 100 mm", "2020 B-type extrusion 100 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2020-B6-150"
title = "T-slot 20 × 20 B-type slot 6, 150 mm"
params = { profile = "2020-B6", length = 150 }
aliases = ["2020 B-type slot 6 150 mm", "20x20 slot 6 profile 150 mm", "2020 extrusion 150 mm", "20 x 20 extrusion 150 mm", "2020 B-type extrusion 150 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2020-B6-200"
title = "T-slot 20 × 20 B-type slot 6, 200 mm"
params = { profile = "2020-B6", length = 200 }
aliases = ["2020 B-type slot 6 200 mm", "20x20 slot 6 profile 200 mm", "2020 extrusion 200 mm", "20 x 20 extrusion 200 mm", "2020 B-type extrusion 200 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2020-B6-250"
title = "T-slot 20 × 20 B-type slot 6, 250 mm"
params = { profile = "2020-B6", length = 250 }
aliases = ["2020 B-type slot 6 250 mm", "20x20 slot 6 profile 250 mm", "2020 extrusion 250 mm", "20 x 20 extrusion 250 mm", "2020 B-type extrusion 250 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2020-B6-300"
title = "T-slot 20 × 20 B-type slot 6, 300 mm"
params = { profile = "2020-B6", length = 300 }
aliases = ["2020 B-type slot 6 300 mm", "20x20 slot 6 profile 300 mm", "2020 extrusion 300 mm", "20 x 20 extrusion 300 mm", "2020 B-type extrusion 300 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2020-B6-380"
title = "T-slot 20 × 20 B-type slot 6, 380 mm"
params = { profile = "2020-B6", length = 380 }
aliases = ["2020 B-type slot 6 380 mm", "20x20 slot 6 profile 380 mm", "2020 B-type slot-6 extrusion"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2020-B6-400"
title = "T-slot 20 × 20 B-type slot 6, 400 mm"
params = { profile = "2020-B6", length = 400 }
aliases = ["2020 B-type slot 6 400 mm", "20x20 slot 6 profile 400 mm", "2020 extrusion 400 mm", "20 x 20 extrusion 400 mm", "2020 B-type extrusion 400 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2020-B6-500"
title = "T-slot 20 × 20 B-type slot 6, 500 mm"
params = { profile = "2020-B6", length = 500 }
aliases = ["2020 B-type slot 6 500 mm", "20x20 slot 6 profile 500 mm", "2020 extrusion 500 mm", "20 x 20 extrusion 500 mm", "2020 B-type extrusion 500 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2020-B6-750"
title = "T-slot 20 × 20 B-type slot 6, 750 mm"
params = { profile = "2020-B6", length = 750 }
aliases = ["2020 B-type slot 6 750 mm", "20x20 slot 6 profile 750 mm", "2020 extrusion 750 mm", "20 x 20 extrusion 750 mm", "2020 B-type extrusion 750 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2020-B6-1000"
title = "T-slot 20 × 20 B-type slot 6, 1000 mm"
params = { profile = "2020-B6", length = 1000 }
aliases = ["2020 B-type slot 6 1000 mm", "20x20 slot 6 profile 1000 mm", "2020 extrusion 1000 mm", "20 x 20 extrusion 1000 mm", "2020 B-type extrusion 1000 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2020-B6-1500"
title = "T-slot 20 × 20 B-type slot 6, 1500 mm"
params = { profile = "2020-B6", length = 1500 }
aliases = ["2020 B-type slot 6 1500 mm", "20x20 slot 6 profile 1500 mm", "2020 extrusion 1500 mm", "20 x 20 extrusion 1500 mm", "2020 B-type extrusion 1500 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2020-B6-2000"
title = "T-slot 20 × 20 B-type slot 6, 2000 mm"
params = { profile = "2020-B6", length = 2000 }
aliases = ["2020 B-type slot 6 2000 mm", "20x20 slot 6 profile 2000 mm", "2020 extrusion 2000 mm", "20 x 20 extrusion 2000 mm", "2020 B-type extrusion 2000 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2020-I5-50"
title = "T-slot 20 × 20 I-type slot 5, 50 mm"
params = { profile = "2020-I5", length = 50 }
aliases = ["2020 I-type slot 5 50 mm", "20x20 slot 5 profile 50 mm", "2020 extrusion 50 mm", "20 x 20 extrusion 50 mm", "2020 I-type extrusion 50 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2020-I5-100"
title = "T-slot 20 × 20 I-type slot 5, 100 mm"
params = { profile = "2020-I5", length = 100 }
aliases = ["2020 I-type slot 5 100 mm", "20x20 slot 5 profile 100 mm", "2020 extrusion 100 mm", "20 x 20 extrusion 100 mm", "2020 I-type extrusion 100 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2020-I5-150"
title = "T-slot 20 × 20 I-type slot 5, 150 mm"
params = { profile = "2020-I5", length = 150 }
aliases = ["2020 I-type slot 5 150 mm", "20x20 slot 5 profile 150 mm", "2020 extrusion 150 mm", "20 x 20 extrusion 150 mm", "2020 I-type extrusion 150 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2020-I5-200"
title = "T-slot 20 × 20 I-type slot 5, 200 mm"
params = { profile = "2020-I5", length = 200 }
aliases = ["2020 I-type slot 5 200 mm", "20x20 slot 5 profile 200 mm", "2020 I-type slot-5 extrusion", "T-slot 20 × 20 I-type slot 5, 200 mm", "2020 extrusion 200 mm", "20 x 20 extrusion 200 mm", "2020 I-type extrusion 200 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2020-I5-250"
title = "T-slot 20 × 20 I-type slot 5, 250 mm"
params = { profile = "2020-I5", length = 250 }
aliases = ["2020 I-type slot 5 250 mm", "20x20 slot 5 profile 250 mm", "2020 extrusion 250 mm", "20 x 20 extrusion 250 mm", "2020 I-type extrusion 250 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2020-I5-300"
title = "T-slot 20 × 20 I-type slot 5, 300 mm"
params = { profile = "2020-I5", length = 300 }
aliases = ["2020 I-type slot 5 300 mm", "20x20 slot 5 profile 300 mm", "2020 extrusion 300 mm", "20 x 20 extrusion 300 mm", "2020 I-type extrusion 300 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2020-I5-400"
title = "T-slot 20 × 20 I-type slot 5, 400 mm"
params = { profile = "2020-I5", length = 400 }
aliases = ["2020 I-type slot 5 400 mm", "20x20 slot 5 profile 400 mm", "2020 extrusion 400 mm", "20 x 20 extrusion 400 mm", "2020 I-type extrusion 400 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2020-I5-500"
title = "T-slot 20 × 20 I-type slot 5, 500 mm"
params = { profile = "2020-I5", length = 500 }
aliases = ["2020 I-type slot 5 500 mm", "20x20 slot 5 profile 500 mm", "2020 extrusion 500 mm", "20 x 20 extrusion 500 mm", "2020 I-type extrusion 500 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2020-I5-750"
title = "T-slot 20 × 20 I-type slot 5, 750 mm"
params = { profile = "2020-I5", length = 750 }
aliases = ["2020 I-type slot 5 750 mm", "20x20 slot 5 profile 750 mm", "2020 extrusion 750 mm", "20 x 20 extrusion 750 mm", "2020 I-type extrusion 750 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2020-I5-1000"
title = "T-slot 20 × 20 I-type slot 5, 1000 mm"
params = { profile = "2020-I5", length = 1000 }
aliases = ["2020 I-type slot 5 1000 mm", "20x20 slot 5 profile 1000 mm", "2020 extrusion 1000 mm", "20 x 20 extrusion 1000 mm", "2020 I-type extrusion 1000 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2020-I5-1500"
title = "T-slot 20 × 20 I-type slot 5, 1500 mm"
params = { profile = "2020-I5", length = 1500 }
aliases = ["2020 I-type slot 5 1500 mm", "20x20 slot 5 profile 1500 mm", "2020 extrusion 1500 mm", "20 x 20 extrusion 1500 mm", "2020 I-type extrusion 1500 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2020-I5-2000"
title = "T-slot 20 × 20 I-type slot 5, 2000 mm"
params = { profile = "2020-I5", length = 2000 }
aliases = ["2020 I-type slot 5 2000 mm", "20x20 slot 5 profile 2000 mm", "2020 extrusion 2000 mm", "20 x 20 extrusion 2000 mm", "2020 I-type extrusion 2000 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2020-I5-ISP-10"
title = "T-slot 20 × 20 item-compatible slot 5, 10 mm"
params = { profile = "2020-I5-ISP", length = 10 }
aliases = ["item compatible 20x20 slot 5 10 mm", "ISP 20x20 10 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2020-I5-ISP-50"
title = "T-slot 20 × 20 item-compatible slot 5, 50 mm"
params = { profile = "2020-I5-ISP", length = 50 }
aliases = ["item compatible 20x20 slot 5 50 mm", "ISP 20x20 50 mm", "2020 extrusion 50 mm", "20 x 20 extrusion 50 mm", "2020 I-type extrusion 50 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2020-I5-ISP-100"
title = "T-slot 20 × 20 item-compatible slot 5, 100 mm"
params = { profile = "2020-I5-ISP", length = 100 }
aliases = ["item compatible 20x20 slot 5 100 mm", "ISP 20x20 100 mm", "2020 extrusion 100 mm", "20 x 20 extrusion 100 mm", "2020 I-type extrusion 100 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2020-I5-ISP-150"
title = "T-slot 20 × 20 item-compatible slot 5, 150 mm"
params = { profile = "2020-I5-ISP", length = 150 }
aliases = ["item compatible 20x20 slot 5 150 mm", "ISP 20x20 150 mm", "2020 extrusion 150 mm", "20 x 20 extrusion 150 mm", "2020 I-type extrusion 150 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2020-I5-ISP-200"
title = "T-slot 20 × 20 item-compatible slot 5, 200 mm"
params = { profile = "2020-I5-ISP", length = 200 }
aliases = ["item compatible 20x20 slot 5 200 mm", "ISP 20x20 200 mm", "2020 extrusion 200 mm", "20 x 20 extrusion 200 mm", "2020 I-type extrusion 200 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2020-I5-ISP-250"
title = "T-slot 20 × 20 item-compatible slot 5, 250 mm"
params = { profile = "2020-I5-ISP", length = 250 }
aliases = ["item compatible 20x20 slot 5 250 mm", "ISP 20x20 250 mm", "2020 extrusion 250 mm", "20 x 20 extrusion 250 mm", "2020 I-type extrusion 250 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2020-I5-ISP-300"
title = "T-slot 20 × 20 item-compatible slot 5, 300 mm"
params = { profile = "2020-I5-ISP", length = 300 }
aliases = ["item compatible 20x20 slot 5 300 mm", "ISP 20x20 300 mm", "2020 extrusion 300 mm", "20 x 20 extrusion 300 mm", "2020 I-type extrusion 300 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2020-I5-ISP-400"
title = "T-slot 20 × 20 item-compatible slot 5, 400 mm"
params = { profile = "2020-I5-ISP", length = 400 }
aliases = ["item compatible 20x20 slot 5 400 mm", "ISP 20x20 400 mm", "2020 extrusion 400 mm", "20 x 20 extrusion 400 mm", "2020 I-type extrusion 400 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2020-I5-ISP-500"
title = "T-slot 20 × 20 item-compatible slot 5, 500 mm"
params = { profile = "2020-I5-ISP", length = 500 }
aliases = ["item compatible 20x20 slot 5 500 mm", "ISP 20x20 500 mm", "2020 extrusion 500 mm", "20 x 20 extrusion 500 mm", "2020 I-type extrusion 500 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2020-I5-ISP-750"
title = "T-slot 20 × 20 item-compatible slot 5, 750 mm"
params = { profile = "2020-I5-ISP", length = 750 }
aliases = ["item compatible 20x20 slot 5 750 mm", "ISP 20x20 750 mm", "2020 extrusion 750 mm", "20 x 20 extrusion 750 mm", "2020 I-type extrusion 750 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2020-I5-ISP-1000"
title = "T-slot 20 × 20 item-compatible slot 5, 1000 mm"
params = { profile = "2020-I5-ISP", length = 1000 }
aliases = ["item compatible 20x20 slot 5 1000 mm", "ISP 20x20 1000 mm", "2020 extrusion 1000 mm", "20 x 20 extrusion 1000 mm", "2020 I-type extrusion 1000 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2020-I5-ISP-1500"
title = "T-slot 20 × 20 item-compatible slot 5, 1500 mm"
params = { profile = "2020-I5-ISP", length = 1500 }
aliases = ["item compatible 20x20 slot 5 1500 mm", "ISP 20x20 1500 mm", "2020 extrusion 1500 mm", "20 x 20 extrusion 1500 mm", "2020 I-type extrusion 1500 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2020-I5-ISP-2000"
title = "T-slot 20 × 20 item-compatible slot 5, 2000 mm"
params = { profile = "2020-I5-ISP", length = 2000 }
aliases = ["item compatible 20x20 slot 5 2000 mm", "ISP 20x20 2000 mm", "2020 extrusion 2000 mm", "20 x 20 extrusion 2000 mm", "2020 I-type extrusion 2000 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2040-B6-50"
title = "T-slot 20 × 40 B-type slot 6, 50 mm"
params = { profile = "2040-B6", length = 50 }
aliases = ["2040 B-type slot 6 50 mm", "20x40 slot 6 profile 50 mm", "2040 extrusion 50 mm", "20 x 40 extrusion 50 mm", "2040 B-type extrusion 50 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2040-B6-100"
title = "T-slot 20 × 40 B-type slot 6, 100 mm"
params = { profile = "2040-B6", length = 100 }
aliases = ["2040 B-type slot 6 100 mm", "20x40 slot 6 profile 100 mm", "2040 B-type slot-6 extrusion", "T-slot 20 × 40 B-type slot 6, 100 mm", "2040 extrusion 100 mm", "20 x 40 extrusion 100 mm", "2040 B-type extrusion 100 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2040-B6-150"
title = "T-slot 20 × 40 B-type slot 6, 150 mm"
params = { profile = "2040-B6", length = 150 }
aliases = ["2040 B-type slot 6 150 mm", "20x40 slot 6 profile 150 mm", "2040 extrusion 150 mm", "20 x 40 extrusion 150 mm", "2040 B-type extrusion 150 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2040-B6-200"
title = "T-slot 20 × 40 B-type slot 6, 200 mm"
params = { profile = "2040-B6", length = 200 }
aliases = ["2040 B-type slot 6 200 mm", "20x40 slot 6 profile 200 mm", "2040 extrusion 200 mm", "20 x 40 extrusion 200 mm", "2040 B-type extrusion 200 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2040-B6-250"
title = "T-slot 20 × 40 B-type slot 6, 250 mm"
params = { profile = "2040-B6", length = 250 }
aliases = ["2040 B-type slot 6 250 mm", "20x40 slot 6 profile 250 mm", "2040 extrusion 250 mm", "20 x 40 extrusion 250 mm", "2040 B-type extrusion 250 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2040-B6-300"
title = "T-slot 20 × 40 B-type slot 6, 300 mm"
params = { profile = "2040-B6", length = 300 }
aliases = ["2040 B-type slot 6 300 mm", "20x40 slot 6 profile 300 mm", "2040 extrusion 300 mm", "20 x 40 extrusion 300 mm", "2040 B-type extrusion 300 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2040-B6-400"
title = "T-slot 20 × 40 B-type slot 6, 400 mm"
params = { profile = "2040-B6", length = 400 }
aliases = ["2040 B-type slot 6 400 mm", "20x40 slot 6 profile 400 mm", "2040 extrusion 400 mm", "20 x 40 extrusion 400 mm", "2040 B-type extrusion 400 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2040-B6-500"
title = "T-slot 20 × 40 B-type slot 6, 500 mm"
params = { profile = "2040-B6", length = 500 }
aliases = ["2040 B-type slot 6 500 mm", "20x40 slot 6 profile 500 mm", "2040 extrusion 500 mm", "20 x 40 extrusion 500 mm", "2040 B-type extrusion 500 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2040-B6-750"
title = "T-slot 20 × 40 B-type slot 6, 750 mm"
params = { profile = "2040-B6", length = 750 }
aliases = ["2040 B-type slot 6 750 mm", "20x40 slot 6 profile 750 mm", "2040 extrusion 750 mm", "20 x 40 extrusion 750 mm", "2040 B-type extrusion 750 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2040-B6-1000"
title = "T-slot 20 × 40 B-type slot 6, 1000 mm"
params = { profile = "2040-B6", length = 1000 }
aliases = ["2040 B-type slot 6 1000 mm", "20x40 slot 6 profile 1000 mm", "2040 extrusion 1000 mm", "20 x 40 extrusion 1000 mm", "2040 B-type extrusion 1000 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2040-B6-1500"
title = "T-slot 20 × 40 B-type slot 6, 1500 mm"
params = { profile = "2040-B6", length = 1500 }
aliases = ["2040 B-type slot 6 1500 mm", "20x40 slot 6 profile 1500 mm", "2040 extrusion 1500 mm", "20 x 40 extrusion 1500 mm", "2040 B-type extrusion 1500 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "2040-B6-2000"
title = "T-slot 20 × 40 B-type slot 6, 2000 mm"
params = { profile = "2040-B6", length = 2000 }
aliases = ["2040 B-type slot 6 2000 mm", "20x40 slot 6 profile 2000 mm", "2040 extrusion 2000 mm", "20 x 40 extrusion 2000 mm", "2040 B-type extrusion 2000 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "3030-B8-50"
title = "T-slot 30 × 30 B-type slot 8, 50 mm"
params = { profile = "3030-B8", length = 50 }
aliases = ["3030 B-type slot 8 50 mm", "30x30 slot 8 profile 50 mm", "3030 extrusion 50 mm", "30 x 30 extrusion 50 mm", "3030 B-type extrusion 50 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "3030-B8-100"
title = "T-slot 30 × 30 B-type slot 8, 100 mm"
params = { profile = "3030-B8", length = 100 }
aliases = ["3030 B-type slot 8 100 mm", "30x30 slot 8 profile 100 mm", "3030 B-type slot-8 extrusion", "T-slot 30 × 30 B-type slot 8, 100 mm", "3030 extrusion 100 mm", "30 x 30 extrusion 100 mm", "3030 B-type extrusion 100 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "3030-B8-150"
title = "T-slot 30 × 30 B-type slot 8, 150 mm"
params = { profile = "3030-B8", length = 150 }
aliases = ["3030 B-type slot 8 150 mm", "30x30 slot 8 profile 150 mm", "3030 extrusion 150 mm", "30 x 30 extrusion 150 mm", "3030 B-type extrusion 150 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "3030-B8-200"
title = "T-slot 30 × 30 B-type slot 8, 200 mm"
params = { profile = "3030-B8", length = 200 }
aliases = ["3030 B-type slot 8 200 mm", "30x30 slot 8 profile 200 mm", "3030 extrusion 200 mm", "30 x 30 extrusion 200 mm", "3030 B-type extrusion 200 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "3030-B8-250"
title = "T-slot 30 × 30 B-type slot 8, 250 mm"
params = { profile = "3030-B8", length = 250 }
aliases = ["3030 B-type slot 8 250 mm", "30x30 slot 8 profile 250 mm", "3030 extrusion 250 mm", "30 x 30 extrusion 250 mm", "3030 B-type extrusion 250 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "3030-B8-300"
title = "T-slot 30 × 30 B-type slot 8, 300 mm"
params = { profile = "3030-B8", length = 300 }
aliases = ["3030 B-type slot 8 300 mm", "30x30 slot 8 profile 300 mm", "3030 extrusion 300 mm", "30 x 30 extrusion 300 mm", "3030 B-type extrusion 300 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "3030-B8-400"
title = "T-slot 30 × 30 B-type slot 8, 400 mm"
params = { profile = "3030-B8", length = 400 }
aliases = ["3030 B-type slot 8 400 mm", "30x30 slot 8 profile 400 mm", "3030 extrusion 400 mm", "30 x 30 extrusion 400 mm", "3030 B-type extrusion 400 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "3030-B8-500"
title = "T-slot 30 × 30 B-type slot 8, 500 mm"
params = { profile = "3030-B8", length = 500 }
aliases = ["3030 B-type slot 8 500 mm", "30x30 slot 8 profile 500 mm", "3030 extrusion 500 mm", "30 x 30 extrusion 500 mm", "3030 B-type extrusion 500 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "3030-B8-750"
title = "T-slot 30 × 30 B-type slot 8, 750 mm"
params = { profile = "3030-B8", length = 750 }
aliases = ["3030 B-type slot 8 750 mm", "30x30 slot 8 profile 750 mm", "3030 extrusion 750 mm", "30 x 30 extrusion 750 mm", "3030 B-type extrusion 750 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "3030-B8-1000"
title = "T-slot 30 × 30 B-type slot 8, 1000 mm"
params = { profile = "3030-B8", length = 1000 }
aliases = ["3030 B-type slot 8 1000 mm", "30x30 slot 8 profile 1000 mm", "3030 extrusion 1000 mm", "30 x 30 extrusion 1000 mm", "3030 B-type extrusion 1000 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "3030-B8-1500"
title = "T-slot 30 × 30 B-type slot 8, 1500 mm"
params = { profile = "3030-B8", length = 1500 }
aliases = ["3030 B-type slot 8 1500 mm", "30x30 slot 8 profile 1500 mm", "3030 extrusion 1500 mm", "30 x 30 extrusion 1500 mm", "3030 B-type extrusion 1500 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "3030-B8-2000"
title = "T-slot 30 × 30 B-type slot 8, 2000 mm"
params = { profile = "3030-B8", length = 2000 }
aliases = ["3030 B-type slot 8 2000 mm", "30x30 slot 8 profile 2000 mm", "3030 extrusion 2000 mm", "30 x 30 extrusion 2000 mm", "3030 B-type extrusion 2000 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "3030-HFS6-50"
title = "T-slot 30 × 30 Misumi HFS6 slot 8, 50 mm"
params = { profile = "3030-HFS6", length = 50 }
aliases = ["Misumi HFS6-3030 50 mm", "HFS6 30x30 50 mm", "3030 extrusion 50 mm", "30 x 30 extrusion 50 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "3030-HFS6-100"
title = "T-slot 30 × 30 Misumi HFS6 slot 8, 100 mm"
params = { profile = "3030-HFS6", length = 100 }
aliases = ["Misumi HFS6-3030 100 mm", "HFS6 30x30 100 mm", "3030 extrusion 100 mm", "30 x 30 extrusion 100 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "3030-HFS6-150"
title = "T-slot 30 × 30 Misumi HFS6 slot 8, 150 mm"
params = { profile = "3030-HFS6", length = 150 }
aliases = ["Misumi HFS6-3030 150 mm", "HFS6 30x30 150 mm", "3030 extrusion 150 mm", "30 x 30 extrusion 150 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "3030-HFS6-200"
title = "T-slot 30 × 30 Misumi HFS6 slot 8, 200 mm"
params = { profile = "3030-HFS6", length = 200 }
aliases = ["Misumi HFS6-3030 200 mm", "HFS6 30x30 200 mm", "3030 extrusion 200 mm", "30 x 30 extrusion 200 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "3030-HFS6-250"
title = "T-slot 30 × 30 Misumi HFS6 slot 8, 250 mm"
params = { profile = "3030-HFS6", length = 250 }
aliases = ["Misumi HFS6-3030 250 mm", "HFS6 30x30 250 mm", "3030 extrusion 250 mm", "30 x 30 extrusion 250 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "3030-HFS6-300"
title = "T-slot 30 × 30 Misumi HFS6 slot 8, 300 mm"
params = { profile = "3030-HFS6", length = 300 }
aliases = ["Misumi HFS6-3030 300 mm", "HFS6 30x30 300 mm", "3030 extrusion 300 mm", "30 x 30 extrusion 300 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "3030-HFS6-400"
title = "T-slot 30 × 30 Misumi HFS6 slot 8, 400 mm"
params = { profile = "3030-HFS6", length = 400 }
aliases = ["Misumi HFS6-3030 400 mm", "HFS6 30x30 400 mm", "3030 extrusion 400 mm", "30 x 30 extrusion 400 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "3030-HFS6-500"
title = "T-slot 30 × 30 Misumi HFS6 slot 8, 500 mm"
params = { profile = "3030-HFS6", length = 500 }
aliases = ["Misumi HFS6-3030 500 mm", "HFS6 30x30 500 mm", "3030 extrusion 500 mm", "30 x 30 extrusion 500 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "3030-HFS6-750"
title = "T-slot 30 × 30 Misumi HFS6 slot 8, 750 mm"
params = { profile = "3030-HFS6", length = 750 }
aliases = ["Misumi HFS6-3030 750 mm", "HFS6 30x30 750 mm", "3030 extrusion 750 mm", "30 x 30 extrusion 750 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "3030-HFS6-1000"
title = "T-slot 30 × 30 Misumi HFS6 slot 8, 1000 mm"
params = { profile = "3030-HFS6", length = 1000 }
aliases = ["Misumi HFS6-3030 1000 mm", "HFS6 30x30 1000 mm", "3030 extrusion 1000 mm", "30 x 30 extrusion 1000 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "3030-HFS6-1500"
title = "T-slot 30 × 30 Misumi HFS6 slot 8, 1500 mm"
params = { profile = "3030-HFS6", length = 1500 }
aliases = ["Misumi HFS6-3030 1500 mm", "HFS6 30x30 1500 mm", "3030 extrusion 1500 mm", "30 x 30 extrusion 1500 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "3030-HFS6-2000"
title = "T-slot 30 × 30 Misumi HFS6 slot 8, 2000 mm"
params = { profile = "3030-HFS6", length = 2000 }
aliases = ["Misumi HFS6-3030 2000 mm", "HFS6 30x30 2000 mm", "3030 extrusion 2000 mm", "30 x 30 extrusion 2000 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "3060-B8-50"
title = "T-slot 30 × 60 B-type slot 8, 50 mm"
params = { profile = "3060-B8", length = 50 }
aliases = ["3060 B-type slot 8 50 mm", "30x60 slot 8 profile 50 mm", "3060 extrusion 50 mm", "30 x 60 extrusion 50 mm", "3060 B-type extrusion 50 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "3060-B8-100"
title = "T-slot 30 × 60 B-type slot 8, 100 mm"
params = { profile = "3060-B8", length = 100 }
aliases = ["3060 B-type slot 8 100 mm", "30x60 slot 8 profile 100 mm", "3060 B-type slot-8 extrusion", "T-slot 30 × 60 B-type slot 8, 100 mm", "3060 extrusion 100 mm", "30 x 60 extrusion 100 mm", "3060 B-type extrusion 100 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "3060-B8-150"
title = "T-slot 30 × 60 B-type slot 8, 150 mm"
params = { profile = "3060-B8", length = 150 }
aliases = ["3060 B-type slot 8 150 mm", "30x60 slot 8 profile 150 mm", "3060 extrusion 150 mm", "30 x 60 extrusion 150 mm", "3060 B-type extrusion 150 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "3060-B8-200"
title = "T-slot 30 × 60 B-type slot 8, 200 mm"
params = { profile = "3060-B8", length = 200 }
aliases = ["3060 B-type slot 8 200 mm", "30x60 slot 8 profile 200 mm", "3060 extrusion 200 mm", "30 x 60 extrusion 200 mm", "3060 B-type extrusion 200 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "3060-B8-250"
title = "T-slot 30 × 60 B-type slot 8, 250 mm"
params = { profile = "3060-B8", length = 250 }
aliases = ["3060 B-type slot 8 250 mm", "30x60 slot 8 profile 250 mm", "3060 extrusion 250 mm", "30 x 60 extrusion 250 mm", "3060 B-type extrusion 250 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "3060-B8-300"
title = "T-slot 30 × 60 B-type slot 8, 300 mm"
params = { profile = "3060-B8", length = 300 }
aliases = ["3060 B-type slot 8 300 mm", "30x60 slot 8 profile 300 mm", "3060 extrusion 300 mm", "30 x 60 extrusion 300 mm", "3060 B-type extrusion 300 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "3060-B8-400"
title = "T-slot 30 × 60 B-type slot 8, 400 mm"
params = { profile = "3060-B8", length = 400 }
aliases = ["3060 B-type slot 8 400 mm", "30x60 slot 8 profile 400 mm", "3060 extrusion 400 mm", "30 x 60 extrusion 400 mm", "3060 B-type extrusion 400 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "3060-B8-500"
title = "T-slot 30 × 60 B-type slot 8, 500 mm"
params = { profile = "3060-B8", length = 500 }
aliases = ["3060 B-type slot 8 500 mm", "30x60 slot 8 profile 500 mm", "3060 extrusion 500 mm", "30 x 60 extrusion 500 mm", "3060 B-type extrusion 500 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "3060-B8-750"
title = "T-slot 30 × 60 B-type slot 8, 750 mm"
params = { profile = "3060-B8", length = 750 }
aliases = ["3060 B-type slot 8 750 mm", "30x60 slot 8 profile 750 mm", "3060 extrusion 750 mm", "30 x 60 extrusion 750 mm", "3060 B-type extrusion 750 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "3060-B8-1000"
title = "T-slot 30 × 60 B-type slot 8, 1000 mm"
params = { profile = "3060-B8", length = 1000 }
aliases = ["3060 B-type slot 8 1000 mm", "30x60 slot 8 profile 1000 mm", "3060 extrusion 1000 mm", "30 x 60 extrusion 1000 mm", "3060 B-type extrusion 1000 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "3060-B8-1500"
title = "T-slot 30 × 60 B-type slot 8, 1500 mm"
params = { profile = "3060-B8", length = 1500 }
aliases = ["3060 B-type slot 8 1500 mm", "30x60 slot 8 profile 1500 mm", "3060 extrusion 1500 mm", "30 x 60 extrusion 1500 mm", "3060 B-type extrusion 1500 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "3060-B8-2000"
title = "T-slot 30 × 60 B-type slot 8, 2000 mm"
params = { profile = "3060-B8", length = 2000 }
aliases = ["3060 B-type slot 8 2000 mm", "30x60 slot 8 profile 2000 mm", "3060 extrusion 2000 mm", "30 x 60 extrusion 2000 mm", "3060 B-type extrusion 2000 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "4040L-I8-50"
title = "T-slot 40 × 40 light I-type slot 8, 50 mm"
params = { profile = "4040L-I8", length = 50 }
aliases = ["4040 light slot 8 50 mm", "40x40L profile 50 mm", "4040L extrusion 50 mm", "40 x 40 extrusion 50 mm", "4040L I-type extrusion 50 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "4040L-I8-100"
title = "T-slot 40 × 40 light I-type slot 8, 100 mm"
params = { profile = "4040L-I8", length = 100 }
aliases = ["4040 light slot 8 100 mm", "40x40L profile 100 mm", "4040L I-type slot-8 extrusion", "T-slot 40 × 40 light I-type slot 8, 100 mm", "4040L extrusion 100 mm", "40 x 40 extrusion 100 mm", "4040L I-type extrusion 100 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "4040L-I8-150"
title = "T-slot 40 × 40 light I-type slot 8, 150 mm"
params = { profile = "4040L-I8", length = 150 }
aliases = ["4040 light slot 8 150 mm", "40x40L profile 150 mm", "4040L extrusion 150 mm", "40 x 40 extrusion 150 mm", "4040L I-type extrusion 150 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "4040L-I8-200"
title = "T-slot 40 × 40 light I-type slot 8, 200 mm"
params = { profile = "4040L-I8", length = 200 }
aliases = ["4040 light slot 8 200 mm", "40x40L profile 200 mm", "4040L extrusion 200 mm", "40 x 40 extrusion 200 mm", "4040L I-type extrusion 200 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "4040L-I8-250"
title = "T-slot 40 × 40 light I-type slot 8, 250 mm"
params = { profile = "4040L-I8", length = 250 }
aliases = ["4040 light slot 8 250 mm", "40x40L profile 250 mm", "4040L extrusion 250 mm", "40 x 40 extrusion 250 mm", "4040L I-type extrusion 250 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "4040L-I8-300"
title = "T-slot 40 × 40 light I-type slot 8, 300 mm"
params = { profile = "4040L-I8", length = 300 }
aliases = ["4040 light slot 8 300 mm", "40x40L profile 300 mm", "4040L extrusion 300 mm", "40 x 40 extrusion 300 mm", "4040L I-type extrusion 300 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "4040L-I8-400"
title = "T-slot 40 × 40 light I-type slot 8, 400 mm"
params = { profile = "4040L-I8", length = 400 }
aliases = ["4040 light slot 8 400 mm", "40x40L profile 400 mm", "4040L extrusion 400 mm", "40 x 40 extrusion 400 mm", "4040L I-type extrusion 400 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "4040L-I8-500"
title = "T-slot 40 × 40 light I-type slot 8, 500 mm"
params = { profile = "4040L-I8", length = 500 }
aliases = ["4040 light slot 8 500 mm", "40x40L profile 500 mm", "4040L extrusion 500 mm", "40 x 40 extrusion 500 mm", "4040L I-type extrusion 500 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "4040L-I8-750"
title = "T-slot 40 × 40 light I-type slot 8, 750 mm"
params = { profile = "4040L-I8", length = 750 }
aliases = ["4040 light slot 8 750 mm", "40x40L profile 750 mm", "4040L extrusion 750 mm", "40 x 40 extrusion 750 mm", "4040L I-type extrusion 750 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "4040L-I8-1000"
title = "T-slot 40 × 40 light I-type slot 8, 1000 mm"
params = { profile = "4040L-I8", length = 1000 }
aliases = ["4040 light slot 8 1000 mm", "40x40L profile 1000 mm", "4040L extrusion 1000 mm", "40 x 40 extrusion 1000 mm", "4040L I-type extrusion 1000 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "4040L-I8-1500"
title = "T-slot 40 × 40 light I-type slot 8, 1500 mm"
params = { profile = "4040L-I8", length = 1500 }
aliases = ["4040 light slot 8 1500 mm", "40x40L profile 1500 mm", "4040L extrusion 1500 mm", "40 x 40 extrusion 1500 mm", "4040L I-type extrusion 1500 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "4040L-I8-2000"
title = "T-slot 40 × 40 light I-type slot 8, 2000 mm"
params = { profile = "4040L-I8", length = 2000 }
aliases = ["4040 light slot 8 2000 mm", "40x40L profile 2000 mm", "4040L extrusion 2000 mm", "40 x 40 extrusion 2000 mm", "4040L I-type extrusion 2000 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "4080L-I8-50"
title = "T-slot 40 × 80 light I-type slot 8, 50 mm"
params = { profile = "4080L-I8", length = 50 }
aliases = ["4080 light slot 8 50 mm", "40x80L profile 50 mm", "4080L extrusion 50 mm", "40 x 80 extrusion 50 mm", "4080L I-type extrusion 50 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "4080L-I8-100"
title = "T-slot 40 × 80 light I-type slot 8, 100 mm"
params = { profile = "4080L-I8", length = 100 }
aliases = ["4080 light slot 8 100 mm", "40x80L profile 100 mm", "4080L I-type slot-8 extrusion", "T-slot 40 × 80 light I-type slot 8, 100 mm", "4080L extrusion 100 mm", "40 x 80 extrusion 100 mm", "4080L I-type extrusion 100 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "4080L-I8-150"
title = "T-slot 40 × 80 light I-type slot 8, 150 mm"
params = { profile = "4080L-I8", length = 150 }
aliases = ["4080 light slot 8 150 mm", "40x80L profile 150 mm", "4080L extrusion 150 mm", "40 x 80 extrusion 150 mm", "4080L I-type extrusion 150 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "4080L-I8-200"
title = "T-slot 40 × 80 light I-type slot 8, 200 mm"
params = { profile = "4080L-I8", length = 200 }
aliases = ["4080 light slot 8 200 mm", "40x80L profile 200 mm", "4080L extrusion 200 mm", "40 x 80 extrusion 200 mm", "4080L I-type extrusion 200 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "4080L-I8-250"
title = "T-slot 40 × 80 light I-type slot 8, 250 mm"
params = { profile = "4080L-I8", length = 250 }
aliases = ["4080 light slot 8 250 mm", "40x80L profile 250 mm", "4080L extrusion 250 mm", "40 x 80 extrusion 250 mm", "4080L I-type extrusion 250 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "4080L-I8-300"
title = "T-slot 40 × 80 light I-type slot 8, 300 mm"
params = { profile = "4080L-I8", length = 300 }
aliases = ["4080 light slot 8 300 mm", "40x80L profile 300 mm", "4080L extrusion 300 mm", "40 x 80 extrusion 300 mm", "4080L I-type extrusion 300 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "4080L-I8-400"
title = "T-slot 40 × 80 light I-type slot 8, 400 mm"
params = { profile = "4080L-I8", length = 400 }
aliases = ["4080 light slot 8 400 mm", "40x80L profile 400 mm", "4080L extrusion 400 mm", "40 x 80 extrusion 400 mm", "4080L I-type extrusion 400 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "4080L-I8-500"
title = "T-slot 40 × 80 light I-type slot 8, 500 mm"
params = { profile = "4080L-I8", length = 500 }
aliases = ["4080 light slot 8 500 mm", "40x80L profile 500 mm", "4080L extrusion 500 mm", "40 x 80 extrusion 500 mm", "4080L I-type extrusion 500 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "4080L-I8-750"
title = "T-slot 40 × 80 light I-type slot 8, 750 mm"
params = { profile = "4080L-I8", length = 750 }
aliases = ["4080 light slot 8 750 mm", "40x80L profile 750 mm", "4080L extrusion 750 mm", "40 x 80 extrusion 750 mm", "4080L I-type extrusion 750 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "4080L-I8-1000"
title = "T-slot 40 × 80 light I-type slot 8, 1000 mm"
params = { profile = "4080L-I8", length = 1000 }
aliases = ["4080 light slot 8 1000 mm", "40x80L profile 1000 mm", "4080L extrusion 1000 mm", "40 x 80 extrusion 1000 mm", "4080L I-type extrusion 1000 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "4080L-I8-1500"
title = "T-slot 40 × 80 light I-type slot 8, 1500 mm"
params = { profile = "4080L-I8", length = 1500 }
aliases = ["4080 light slot 8 1500 mm", "40x80L profile 1500 mm", "4080L extrusion 1500 mm", "40 x 80 extrusion 1500 mm", "4080L I-type extrusion 1500 mm"]
standard = "FreeCAD-library T-slot profile"

[[presets]]
id = "4080L-I8-2000"
title = "T-slot 40 × 80 light I-type slot 8, 2000 mm"
params = { profile = "4080L-I8", length = 2000 }
aliases = ["4080 light slot 8 2000 mm", "40x80L profile 2000 mm", "4080L extrusion 2000 mm", "40 x 80 extrusion 2000 mm", "4080L I-type extrusion 2000 mm"]
standard = "FreeCAD-library T-slot profile"