steve/screw-terminal-block

PCB screw terminal block, Phoenix Contact MKDS 1,5 type: 5.0 and 5.08 mm pitch, 2 to 16 positions.

v1.0.0 STEVE MIT 0

Open in STEVE

Isometric

Parameters

Preset31 sizes

Pitch

5.05.08

Positions2–16

Detail

fullsimple

full: wire entries, screw openings and solder pins. simple: the housing's outline.

Defaults built

part.py 44 lines · Python · STEVE runtime · checked

Download

"""PCB screw terminal block, Phoenix Contact MKDS 1,5 type, 5.0 or 5.08 mm pitch, 2 to 16 positions. Pin 1 is at the origin, the row along +X, the housing on

the XY plane, the wire entries facing -Y, the screws on top, the solder pins down through the board. Dimensions from Phoenix Contact's data sheet in the README."""

from steve import Model

pitch = 5.08 # mm Pitch

positions = 2 # Positions

detail = "full" # full: wire entries, screw heads and solder pins; simple: the housing's outline

# Phoenix Contact data sheet, PCB terminal block MKDS 1,5/ 2-5,08 (1715721), Dimensions p. 4 and Dimensional drawing p. 8: width a + pitch, height 13.8 above

# the board, length 9.8, solder pins 3.5 long, 0.9 x 0.9, 4.6 from the wire-entry face. The drawing gives the same housing for 5.0 and 5.08 mm pitch.

HEIGHT, LENGTH, PIN_LENGTH, PIN, PIN_FROM_FRONT = 13.8, 9.8, 3.5, 0.9, 4.6

if pitch not in (5.0, 5.08) or not 2 <= positions <= 16:

raise ValueError("MKDS 1,5 comes in 5.0 and 5.08 mm pitch, 2 to 16 positions.")

width = positions * pitch

x0 = -pitch / 2

front = -PIN_FROM_FRONT

# the side profile: the step at the top of the wire-entry face and the sloped back are proportions, for looks

profile = [(front, 0), (front + LENGTH, 0), (front + LENGTH, 0.72 * HEIGHT), (front + 0.75 * LENGTH, HEIGHT), (front + 0.25 * LENGTH, HEIGHT), (front + 0.25 * LENGTH, 0.8 * HEIGHT), (front, 0.8 * HEIGHT)]

model = Model()

model.plane("side_plane", on="YZ", offset=x0, name="Side")

with model.sketch("body_sketch", on="side_plane", name="Housing") as sk:

sk.polyline("body_outline", profile, closed=True)

model.extrude("body", "body_sketch", distance=width, name="Housing")

if detail == "full":

entry, screw = 0.6 * pitch, 0.55 * pitch # the wire entry and screw head sizes are proportions, for looks

model.plane("front_plane", on="XZ", offset=-front, name="Wire entries")

with model.sketch("entries_sketch", on="front_plane", name="Wire entries") as sk:

for i in range(positions):

sk.rect(f"entry_{i}", (i * pitch - entry / 2, 0.25 * HEIGHT), (i * pitch + entry / 2, 0.25 * HEIGHT + entry))

model.extrude("entries", "entries_sketch", distance=-0.55 * LENGTH, op="cut", name="Wire entries")

model.plane("top_plane", on="XY", offset=HEIGHT, name="Top")

with model.sketch("screws_sketch", on="top_plane", name="Screw openings") as sk:

for i in range(positions):

sk.circle(f"screw_{i}", (i * pitch, front + 0.5 * LENGTH), screw / 2)

model.extrude("screws", "screws_sketch", distance=-0.15 * HEIGHT, op="cut", name="Screw openings")

model.plane("pin_plane", on="XY", offset=-PIN_LENGTH, name="Solder pins")

with model.sketch("pins_sketch", on="pin_plane", name="Solder pins") as sk:

for i in range(positions):

sk.rect(f"pin_{i}", (i * pitch - PIN / 2, -PIN / 2), (i * pitch + PIN / 2, PIN / 2))

model.extrude("pins", "pins_sketch", distance=PIN_LENGTH + 1, name="Solder pins")

model.material("pa6", color="#2f7d4a")

result = model.result()

"""PCB screw terminal block, Phoenix Contact MKDS 1,5 type, 5.0 or 5.08 mm pitch, 2 to 16 positions. Pin 1 is at the origin, the row along +X, the housing on
the XY plane, the wire entries facing -Y, the screws on top, the solder pins down through the board. Dimensions from Phoenix Contact's data sheet in the README."""
from steve import Model

pitch = 5.08  # mm Pitch
positions = 2  # Positions
detail = "full"  # full: wire entries, screw heads and solder pins; simple: the housing's outline

# Phoenix Contact data sheet, PCB terminal block MKDS 1,5/ 2-5,08 (1715721), Dimensions p. 4 and Dimensional drawing p. 8: width a + pitch, height 13.8 above
# the board, length 9.8, solder pins 3.5 long, 0.9 x 0.9, 4.6 from the wire-entry face. The drawing gives the same housing for 5.0 and 5.08 mm pitch.
HEIGHT, LENGTH, PIN_LENGTH, PIN, PIN_FROM_FRONT = 13.8, 9.8, 3.5, 0.9, 4.6
if pitch not in (5.0, 5.08) or not 2 <= positions <= 16:
    raise ValueError("MKDS 1,5 comes in 5.0 and 5.08 mm pitch, 2 to 16 positions.")

width = positions * pitch
x0 = -pitch / 2
front = -PIN_FROM_FRONT
# the side profile: the step at the top of the wire-entry face and the sloped back are proportions, for looks
profile = [(front, 0), (front + LENGTH, 0), (front + LENGTH, 0.72 * HEIGHT), (front + 0.75 * LENGTH, HEIGHT), (front + 0.25 * LENGTH, HEIGHT), (front + 0.25 * LENGTH, 0.8 * HEIGHT), (front, 0.8 * HEIGHT)]
model = Model()
model.plane("side_plane", on="YZ", offset=x0, name="Side")
with model.sketch("body_sketch", on="side_plane", name="Housing") as sk:
    sk.polyline("body_outline", profile, closed=True)
model.extrude("body", "body_sketch", distance=width, name="Housing")
if detail == "full":
    entry, screw = 0.6 * pitch, 0.55 * pitch   # the wire entry and screw head sizes are proportions, for looks
    model.plane("front_plane", on="XZ", offset=-front, name="Wire entries")
    with model.sketch("entries_sketch", on="front_plane", name="Wire entries") as sk:
        for i in range(positions):
            sk.rect(f"entry_{i}", (i * pitch - entry / 2, 0.25 * HEIGHT), (i * pitch + entry / 2, 0.25 * HEIGHT + entry))
    model.extrude("entries", "entries_sketch", distance=-0.55 * LENGTH, op="cut", name="Wire entries")
    model.plane("top_plane", on="XY", offset=HEIGHT, name="Top")
    with model.sketch("screws_sketch", on="top_plane", name="Screw openings") as sk:
        for i in range(positions):
            sk.circle(f"screw_{i}", (i * pitch, front + 0.5 * LENGTH), screw / 2)
    model.extrude("screws", "screws_sketch", distance=-0.15 * HEIGHT, op="cut", name="Screw openings")
    model.plane("pin_plane", on="XY", offset=-PIN_LENGTH, name="Solder pins")
    with model.sketch("pins_sketch", on="pin_plane", name="Solder pins") as sk:
        for i in range(positions):
            sk.rect(f"pin_{i}", (i * pitch - PIN / 2, -PIN / 2), (i * pitch + PIN / 2, PIN / 2))
    model.extrude("pins", "pins_sketch", distance=PIN_LENGTH + 1, name="Solder pins")
model.material("pa6", color="#2f7d4a")
result = model.result()

presets.toml 219 lines · TOML

Download

# Presets of this part (factory/PRESETS.md). Written by factory/gen.py.

[[presets]]

id = "MKDS1.5-2-5.0"

title = "Screw terminal block, 2 positions, 5.0 mm (MKDS 1,5)"

params = { pitch = 5, positions = 2 }

aliases = ["MKDS-1,5-2-5.0", "MKDS 1,5/2-5,0", "2 pin screw terminal 5.0", "2 way terminal block 5.0mm", "2P screw terminal 5.0", "2 position terminal block", "2 pin terminal block"]

standard = "Phoenix Contact"

[[presets]]

id = "MKDS1.5-3-5.0"

title = "Screw terminal block, 3 positions, 5.0 mm (MKDS 1,5)"

params = { pitch = 5, positions = 3 }

aliases = ["MKDS-1,5-3-5.0", "MKDS 1,5/3-5,0", "3 pin screw terminal 5.0", "3 way terminal block 5.0mm", "3P screw terminal 5.0", "3 position terminal block", "3 pin terminal block"]

standard = "Phoenix Contact"

[[presets]]

id = "MKDS1.5-4-5.0"

title = "Screw terminal block, 4 positions, 5.0 mm (MKDS 1,5)"

params = { pitch = 5, positions = 4 }

aliases = ["MKDS-1,5-4-5.0", "MKDS 1,5/4-5,0", "4 pin screw terminal 5.0", "4 way terminal block 5.0mm", "4P screw terminal 5.0", "4 position terminal block", "4 pin terminal block"]

standard = "Phoenix Contact"

[[presets]]

id = "MKDS1.5-5-5.0"

title = "Screw terminal block, 5 positions, 5.0 mm (MKDS 1,5)"

params = { pitch = 5, positions = 5 }

aliases = ["MKDS-1,5-5-5.0", "MKDS 1,5/5-5,0", "5 pin screw terminal 5.0", "5 way terminal block 5.0mm", "5P screw terminal 5.0", "5 position terminal block", "5 pin terminal block"]

standard = "Phoenix Contact"

[[presets]]

id = "MKDS1.5-6-5.0"

title = "Screw terminal block, 6 positions, 5.0 mm (MKDS 1,5)"

params = { pitch = 5, positions = 6 }

aliases = ["MKDS-1,5-6-5.0", "MKDS 1,5/6-5,0", "6 pin screw terminal 5.0", "6 way terminal block 5.0mm", "6P screw terminal 5.0", "6 position terminal block", "6 pin terminal block"]

standard = "Phoenix Contact"

[[presets]]

id = "MKDS1.5-7-5.0"

title = "Screw terminal block, 7 positions, 5.0 mm (MKDS 1,5)"

params = { pitch = 5, positions = 7 }

aliases = ["MKDS-1,5-7-5.0", "MKDS 1,5/7-5,0", "7 pin screw terminal 5.0", "7 way terminal block 5.0mm", "7P screw terminal 5.0", "7 position terminal block", "7 pin terminal block"]

standard = "Phoenix Contact"

[[presets]]

id = "MKDS1.5-8-5.0"

title = "Screw terminal block, 8 positions, 5.0 mm (MKDS 1,5)"

params = { pitch = 5, positions = 8 }

aliases = ["MKDS-1,5-8-5.0", "MKDS 1,5/8-5,0", "8 pin screw terminal 5.0", "8 way terminal block 5.0mm", "8P screw terminal 5.0", "8 position terminal block", "8 pin terminal block"]

standard = "Phoenix Contact"

[[presets]]

id = "MKDS1.5-9-5.0"

title = "Screw terminal block, 9 positions, 5.0 mm (MKDS 1,5)"

params = { pitch = 5, positions = 9 }

aliases = ["MKDS-1,5-9-5.0", "MKDS 1,5/9-5,0", "9 pin screw terminal 5.0", "9 way terminal block 5.0mm", "9P screw terminal 5.0", "9 position terminal block", "9 pin terminal block"]

standard = "Phoenix Contact"

[[presets]]

id = "MKDS1.5-10-5.0"

title = "Screw terminal block, 10 positions, 5.0 mm (MKDS 1,5)"

params = { pitch = 5, positions = 10 }

aliases = ["MKDS-1,5-10-5.0", "MKDS 1,5/10-5,0", "10 pin screw terminal 5.0", "10 way terminal block 5.0mm", "10P screw terminal 5.0", "10 position terminal block", "10 pin terminal block"]

standard = "Phoenix Contact"

[[presets]]

id = "MKDS1.5-11-5.0"

title = "Screw terminal block, 11 positions, 5.0 mm (MKDS 1,5)"

params = { pitch = 5, positions = 11 }

aliases = ["MKDS-1,5-11-5.0", "MKDS 1,5/11-5,0", "11 pin screw terminal 5.0", "11 way terminal block 5.0mm", "11P screw terminal 5.0", "11 position terminal block", "11 pin terminal block"]

standard = "Phoenix Contact"

[[presets]]

id = "MKDS1.5-12-5.0"

title = "Screw terminal block, 12 positions, 5.0 mm (MKDS 1,5)"

params = { pitch = 5, positions = 12 }

aliases = ["MKDS-1,5-12-5.0", "MKDS 1,5/12-5,0", "12 pin screw terminal 5.0", "12 way terminal block 5.0mm", "12P screw terminal 5.0", "12 position terminal block", "12 pin terminal block"]

standard = "Phoenix Contact"

[[presets]]

id = "MKDS1.5-13-5.0"

title = "Screw terminal block, 13 positions, 5.0 mm (MKDS 1,5)"

params = { pitch = 5, positions = 13 }

aliases = ["MKDS-1,5-13-5.0", "MKDS 1,5/13-5,0", "13 pin screw terminal 5.0", "13 way terminal block 5.0mm", "13P screw terminal 5.0", "13 position terminal block", "13 pin terminal block"]

standard = "Phoenix Contact"

[[presets]]

id = "MKDS1.5-14-5.0"

title = "Screw terminal block, 14 positions, 5.0 mm (MKDS 1,5)"

params = { pitch = 5, positions = 14 }

aliases = ["MKDS-1,5-14-5.0", "MKDS 1,5/14-5,0", "14 pin screw terminal 5.0", "14 way terminal block 5.0mm", "14P screw terminal 5.0", "14 position terminal block", "14 pin terminal block"]

standard = "Phoenix Contact"

[[presets]]

id = "MKDS1.5-15-5.0"

title = "Screw terminal block, 15 positions, 5.0 mm (MKDS 1,5)"

params = { pitch = 5, positions = 15 }

aliases = ["MKDS-1,5-15-5.0", "MKDS 1,5/15-5,0", "15 pin screw terminal 5.0", "15 way terminal block 5.0mm", "15P screw terminal 5.0", "15 position terminal block", "15 pin terminal block"]

standard = "Phoenix Contact"

100

101

[[presets]]

102

id = "MKDS1.5-16-5.0"

103

title = "Screw terminal block, 16 positions, 5.0 mm (MKDS 1,5)"

104

params = { pitch = 5, positions = 16 }

105

aliases = ["MKDS-1,5-16-5.0", "MKDS 1,5/16-5,0", "16 pin screw terminal 5.0", "16 way terminal block 5.0mm", "16P screw terminal 5.0", "16 position terminal block", "16 pin terminal block"]

106

standard = "Phoenix Contact"

107

108

[[presets]]

109

id = "MKDS1.5-2-5.08"

110

title = "Screw terminal block, 2 positions, 5.08 mm (MKDS 1,5)"

111

params = { pitch = 5.08, positions = 2 }

112

aliases = ["MKDS-1,5-2-5.08", "MKDS 1,5/2-5,08", "2 pin screw terminal 5.08", "2 way terminal block 5.08mm", "2P screw terminal 5.08", "2 position terminal block", "2 pin terminal block"]

113

standard = "Phoenix Contact"

114

115

[[presets]]

116

id = "MKDS1.5-3-5.08"

117

title = "Screw terminal block, 3 positions, 5.08 mm (MKDS 1,5)"

118

params = { pitch = 5.08, positions = 3 }

119

aliases = ["MKDS-1,5-3-5.08", "MKDS 1,5/3-5,08", "3 pin screw terminal 5.08", "3 way terminal block 5.08mm", "3P screw terminal 5.08", "3 position terminal block", "3 pin terminal block"]

120

standard = "Phoenix Contact"

121

122

[[presets]]

123

id = "MKDS1.5-4-5.08"

124

title = "Screw terminal block, 4 positions, 5.08 mm (MKDS 1,5)"

125

params = { pitch = 5.08, positions = 4 }

126

aliases = ["MKDS-1,5-4-5.08", "MKDS 1,5/4-5,08", "4 pin screw terminal 5.08", "4 way terminal block 5.08mm", "4P screw terminal 5.08", "4 position terminal block", "4 pin terminal block"]

127

standard = "Phoenix Contact"

128

129

[[presets]]

130

id = "MKDS1.5-5-5.08"

131

title = "Screw terminal block, 5 positions, 5.08 mm (MKDS 1,5)"

132

params = { pitch = 5.08, positions = 5 }

133

aliases = ["MKDS-1,5-5-5.08", "MKDS 1,5/5-5,08", "5 pin screw terminal 5.08", "5 way terminal block 5.08mm", "5P screw terminal 5.08", "5 position terminal block", "5 pin terminal block"]

134

standard = "Phoenix Contact"

135

136

[[presets]]

137

id = "MKDS1.5-6-5.08"

138

title = "Screw terminal block, 6 positions, 5.08 mm (MKDS 1,5)"

139

params = { pitch = 5.08, positions = 6 }

140

aliases = ["MKDS-1,5-6-5.08", "MKDS 1,5/6-5,08", "6 pin screw terminal 5.08", "6 way terminal block 5.08mm", "6P screw terminal 5.08", "6 position terminal block", "6 pin terminal block"]

141

standard = "Phoenix Contact"

142

143

[[presets]]

144

id = "MKDS1.5-7-5.08"

145

title = "Screw terminal block, 7 positions, 5.08 mm (MKDS 1,5)"

146

params = { pitch = 5.08, positions = 7 }

147

aliases = ["MKDS-1,5-7-5.08", "MKDS 1,5/7-5,08", "7 pin screw terminal 5.08", "7 way terminal block 5.08mm", "7P screw terminal 5.08", "7 position terminal block", "7 pin terminal block"]

148

standard = "Phoenix Contact"

149

150

[[presets]]

151

id = "MKDS1.5-8-5.08"

152

title = "Screw terminal block, 8 positions, 5.08 mm (MKDS 1,5)"

153

params = { pitch = 5.08, positions = 8 }

154

aliases = ["MKDS-1,5-8-5.08", "MKDS 1,5/8-5,08", "8 pin screw terminal 5.08", "8 way terminal block 5.08mm", "8P screw terminal 5.08", "8 position terminal block", "8 pin terminal block"]

155

standard = "Phoenix Contact"

156

157

[[presets]]

158

id = "MKDS1.5-9-5.08"

159

title = "Screw terminal block, 9 positions, 5.08 mm (MKDS 1,5)"

160

params = { pitch = 5.08, positions = 9 }

161

aliases = ["MKDS-1,5-9-5.08", "MKDS 1,5/9-5,08", "9 pin screw terminal 5.08", "9 way terminal block 5.08mm", "9P screw terminal 5.08", "9 position terminal block", "9 pin terminal block"]

162

standard = "Phoenix Contact"

163

164

[[presets]]

165

id = "MKDS1.5-10-5.08"

166

title = "Screw terminal block, 10 positions, 5.08 mm (MKDS 1,5)"

167

params = { pitch = 5.08, positions = 10 }

168

aliases = ["MKDS-1,5-10-5.08", "MKDS 1,5/10-5,08", "10 pin screw terminal 5.08", "10 way terminal block 5.08mm", "10P screw terminal 5.08", "10 position terminal block", "10 pin terminal block"]

169

standard = "Phoenix Contact"

170

171

[[presets]]

172

id = "MKDS1.5-11-5.08"

173

title = "Screw terminal block, 11 positions, 5.08 mm (MKDS 1,5)"

174

params = { pitch = 5.08, positions = 11 }

175

aliases = ["MKDS-1,5-11-5.08", "MKDS 1,5/11-5,08", "11 pin screw terminal 5.08", "11 way terminal block 5.08mm", "11P screw terminal 5.08", "11 position terminal block", "11 pin terminal block"]

176

standard = "Phoenix Contact"

177

178

[[presets]]

179

id = "MKDS1.5-12-5.08"

180

title = "Screw terminal block, 12 positions, 5.08 mm (MKDS 1,5)"

181

params = { pitch = 5.08, positions = 12 }

182

aliases = ["MKDS-1,5-12-5.08", "MKDS 1,5/12-5,08", "12 pin screw terminal 5.08", "12 way terminal block 5.08mm", "12P screw terminal 5.08", "12 position terminal block", "12 pin terminal block"]

183

standard = "Phoenix Contact"

184

185

[[presets]]

186

id = "MKDS1.5-13-5.08"

187

title = "Screw terminal block, 13 positions, 5.08 mm (MKDS 1,5)"

188

params = { pitch = 5.08, positions = 13 }

189

aliases = ["MKDS-1,5-13-5.08", "MKDS 1,5/13-5,08", "13 pin screw terminal 5.08", "13 way terminal block 5.08mm", "13P screw terminal 5.08", "13 position terminal block", "13 pin terminal block"]

190

standard = "Phoenix Contact"

191

192

[[presets]]

193

id = "MKDS1.5-14-5.08"

194

title = "Screw terminal block, 14 positions, 5.08 mm (MKDS 1,5)"

195

params = { pitch = 5.08, positions = 14 }

196

aliases = ["MKDS-1,5-14-5.08", "MKDS 1,5/14-5,08", "14 pin screw terminal 5.08", "14 way terminal block 5.08mm", "14P screw terminal 5.08", "14 position terminal block", "14 pin terminal block"]

197

standard = "Phoenix Contact"

198

199

[[presets]]

200

id = "MKDS1.5-15-5.08"

201

title = "Screw terminal block, 15 positions, 5.08 mm (MKDS 1,5)"

202

params = { pitch = 5.08, positions = 15 }

203

aliases = ["MKDS-1,5-15-5.08", "MKDS 1,5/15-5,08", "15 pin screw terminal 5.08", "15 way terminal block 5.08mm", "15P screw terminal 5.08", "15 position terminal block", "15 pin terminal block"]

204

standard = "Phoenix Contact"

205

206

[[presets]]

207

id = "MKDS1.5-16-5.08"

208

title = "Screw terminal block, 16 positions, 5.08 mm (MKDS 1,5)"

209

params = { pitch = 5.08, positions = 16 }

210

aliases = ["MKDS-1,5-16-5.08", "MKDS 1,5/16-5,08", "16 pin screw terminal 5.08", "16 way terminal block 5.08mm", "16P screw terminal 5.08", "16 position terminal block", "16 pin terminal block"]

211

standard = "Phoenix Contact"

212

213

[[presets]]

214

id = "MKDS1.5-2-5.08-simple"

215

title = "Screw terminal block, 2 positions, 5.08 mm, simple"

216

params = { pitch = 5.08, positions = 2, detail = "simple" }

217

aliases = ["MKDS 1,5/2-5,08 simple"]

218

standard = "Phoenix Contact"

219

# Presets of this part (factory/PRESETS.md). Written by factory/gen.py.

[[presets]]
id = "MKDS1.5-2-5.0"
title = "Screw terminal block, 2 positions, 5.0 mm (MKDS 1,5)"
params = { pitch = 5, positions = 2 }
aliases = ["MKDS-1,5-2-5.0", "MKDS 1,5/2-5,0", "2 pin screw terminal 5.0", "2 way terminal block 5.0mm", "2P screw terminal 5.0", "2 position terminal block", "2 pin terminal block"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-3-5.0"
title = "Screw terminal block, 3 positions, 5.0 mm (MKDS 1,5)"
params = { pitch = 5, positions = 3 }
aliases = ["MKDS-1,5-3-5.0", "MKDS 1,5/3-5,0", "3 pin screw terminal 5.0", "3 way terminal block 5.0mm", "3P screw terminal 5.0", "3 position terminal block", "3 pin terminal block"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-4-5.0"
title = "Screw terminal block, 4 positions, 5.0 mm (MKDS 1,5)"
params = { pitch = 5, positions = 4 }
aliases = ["MKDS-1,5-4-5.0", "MKDS 1,5/4-5,0", "4 pin screw terminal 5.0", "4 way terminal block 5.0mm", "4P screw terminal 5.0", "4 position terminal block", "4 pin terminal block"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-5-5.0"
title = "Screw terminal block, 5 positions, 5.0 mm (MKDS 1,5)"
params = { pitch = 5, positions = 5 }
aliases = ["MKDS-1,5-5-5.0", "MKDS 1,5/5-5,0", "5 pin screw terminal 5.0", "5 way terminal block 5.0mm", "5P screw terminal 5.0", "5 position terminal block", "5 pin terminal block"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-6-5.0"
title = "Screw terminal block, 6 positions, 5.0 mm (MKDS 1,5)"
params = { pitch = 5, positions = 6 }
aliases = ["MKDS-1,5-6-5.0", "MKDS 1,5/6-5,0", "6 pin screw terminal 5.0", "6 way terminal block 5.0mm", "6P screw terminal 5.0", "6 position terminal block", "6 pin terminal block"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-7-5.0"
title = "Screw terminal block, 7 positions, 5.0 mm (MKDS 1,5)"
params = { pitch = 5, positions = 7 }
aliases = ["MKDS-1,5-7-5.0", "MKDS 1,5/7-5,0", "7 pin screw terminal 5.0", "7 way terminal block 5.0mm", "7P screw terminal 5.0", "7 position terminal block", "7 pin terminal block"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-8-5.0"
title = "Screw terminal block, 8 positions, 5.0 mm (MKDS 1,5)"
params = { pitch = 5, positions = 8 }
aliases = ["MKDS-1,5-8-5.0", "MKDS 1,5/8-5,0", "8 pin screw terminal 5.0", "8 way terminal block 5.0mm", "8P screw terminal 5.0", "8 position terminal block", "8 pin terminal block"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-9-5.0"
title = "Screw terminal block, 9 positions, 5.0 mm (MKDS 1,5)"
params = { pitch = 5, positions = 9 }
aliases = ["MKDS-1,5-9-5.0", "MKDS 1,5/9-5,0", "9 pin screw terminal 5.0", "9 way terminal block 5.0mm", "9P screw terminal 5.0", "9 position terminal block", "9 pin terminal block"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-10-5.0"
title = "Screw terminal block, 10 positions, 5.0 mm (MKDS 1,5)"
params = { pitch = 5, positions = 10 }
aliases = ["MKDS-1,5-10-5.0", "MKDS 1,5/10-5,0", "10 pin screw terminal 5.0", "10 way terminal block 5.0mm", "10P screw terminal 5.0", "10 position terminal block", "10 pin terminal block"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-11-5.0"
title = "Screw terminal block, 11 positions, 5.0 mm (MKDS 1,5)"
params = { pitch = 5, positions = 11 }
aliases = ["MKDS-1,5-11-5.0", "MKDS 1,5/11-5,0", "11 pin screw terminal 5.0", "11 way terminal block 5.0mm", "11P screw terminal 5.0", "11 position terminal block", "11 pin terminal block"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-12-5.0"
title = "Screw terminal block, 12 positions, 5.0 mm (MKDS 1,5)"
params = { pitch = 5, positions = 12 }
aliases = ["MKDS-1,5-12-5.0", "MKDS 1,5/12-5,0", "12 pin screw terminal 5.0", "12 way terminal block 5.0mm", "12P screw terminal 5.0", "12 position terminal block", "12 pin terminal block"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-13-5.0"
title = "Screw terminal block, 13 positions, 5.0 mm (MKDS 1,5)"
params = { pitch = 5, positions = 13 }
aliases = ["MKDS-1,5-13-5.0", "MKDS 1,5/13-5,0", "13 pin screw terminal 5.0", "13 way terminal block 5.0mm", "13P screw terminal 5.0", "13 position terminal block", "13 pin terminal block"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-14-5.0"
title = "Screw terminal block, 14 positions, 5.0 mm (MKDS 1,5)"
params = { pitch = 5, positions = 14 }
aliases = ["MKDS-1,5-14-5.0", "MKDS 1,5/14-5,0", "14 pin screw terminal 5.0", "14 way terminal block 5.0mm", "14P screw terminal 5.0", "14 position terminal block", "14 pin terminal block"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-15-5.0"
title = "Screw terminal block, 15 positions, 5.0 mm (MKDS 1,5)"
params = { pitch = 5, positions = 15 }
aliases = ["MKDS-1,5-15-5.0", "MKDS 1,5/15-5,0", "15 pin screw terminal 5.0", "15 way terminal block 5.0mm", "15P screw terminal 5.0", "15 position terminal block", "15 pin terminal block"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-16-5.0"
title = "Screw terminal block, 16 positions, 5.0 mm (MKDS 1,5)"
params = { pitch = 5, positions = 16 }
aliases = ["MKDS-1,5-16-5.0", "MKDS 1,5/16-5,0", "16 pin screw terminal 5.0", "16 way terminal block 5.0mm", "16P screw terminal 5.0", "16 position terminal block", "16 pin terminal block"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-2-5.08"
title = "Screw terminal block, 2 positions, 5.08 mm (MKDS 1,5)"
params = { pitch = 5.08, positions = 2 }
aliases = ["MKDS-1,5-2-5.08", "MKDS 1,5/2-5,08", "2 pin screw terminal 5.08", "2 way terminal block 5.08mm", "2P screw terminal 5.08", "2 position terminal block", "2 pin terminal block"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-3-5.08"
title = "Screw terminal block, 3 positions, 5.08 mm (MKDS 1,5)"
params = { pitch = 5.08, positions = 3 }
aliases = ["MKDS-1,5-3-5.08", "MKDS 1,5/3-5,08", "3 pin screw terminal 5.08", "3 way terminal block 5.08mm", "3P screw terminal 5.08", "3 position terminal block", "3 pin terminal block"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-4-5.08"
title = "Screw terminal block, 4 positions, 5.08 mm (MKDS 1,5)"
params = { pitch = 5.08, positions = 4 }
aliases = ["MKDS-1,5-4-5.08", "MKDS 1,5/4-5,08", "4 pin screw terminal 5.08", "4 way terminal block 5.08mm", "4P screw terminal 5.08", "4 position terminal block", "4 pin terminal block"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-5-5.08"
title = "Screw terminal block, 5 positions, 5.08 mm (MKDS 1,5)"
params = { pitch = 5.08, positions = 5 }
aliases = ["MKDS-1,5-5-5.08", "MKDS 1,5/5-5,08", "5 pin screw terminal 5.08", "5 way terminal block 5.08mm", "5P screw terminal 5.08", "5 position terminal block", "5 pin terminal block"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-6-5.08"
title = "Screw terminal block, 6 positions, 5.08 mm (MKDS 1,5)"
params = { pitch = 5.08, positions = 6 }
aliases = ["MKDS-1,5-6-5.08", "MKDS 1,5/6-5,08", "6 pin screw terminal 5.08", "6 way terminal block 5.08mm", "6P screw terminal 5.08", "6 position terminal block", "6 pin terminal block"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-7-5.08"
title = "Screw terminal block, 7 positions, 5.08 mm (MKDS 1,5)"
params = { pitch = 5.08, positions = 7 }
aliases = ["MKDS-1,5-7-5.08", "MKDS 1,5/7-5,08", "7 pin screw terminal 5.08", "7 way terminal block 5.08mm", "7P screw terminal 5.08", "7 position terminal block", "7 pin terminal block"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-8-5.08"
title = "Screw terminal block, 8 positions, 5.08 mm (MKDS 1,5)"
params = { pitch = 5.08, positions = 8 }
aliases = ["MKDS-1,5-8-5.08", "MKDS 1,5/8-5,08", "8 pin screw terminal 5.08", "8 way terminal block 5.08mm", "8P screw terminal 5.08", "8 position terminal block", "8 pin terminal block"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-9-5.08"
title = "Screw terminal block, 9 positions, 5.08 mm (MKDS 1,5)"
params = { pitch = 5.08, positions = 9 }
aliases = ["MKDS-1,5-9-5.08", "MKDS 1,5/9-5,08", "9 pin screw terminal 5.08", "9 way terminal block 5.08mm", "9P screw terminal 5.08", "9 position terminal block", "9 pin terminal block"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-10-5.08"
title = "Screw terminal block, 10 positions, 5.08 mm (MKDS 1,5)"
params = { pitch = 5.08, positions = 10 }
aliases = ["MKDS-1,5-10-5.08", "MKDS 1,5/10-5,08", "10 pin screw terminal 5.08", "10 way terminal block 5.08mm", "10P screw terminal 5.08", "10 position terminal block", "10 pin terminal block"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-11-5.08"
title = "Screw terminal block, 11 positions, 5.08 mm (MKDS 1,5)"
params = { pitch = 5.08, positions = 11 }
aliases = ["MKDS-1,5-11-5.08", "MKDS 1,5/11-5,08", "11 pin screw terminal 5.08", "11 way terminal block 5.08mm", "11P screw terminal 5.08", "11 position terminal block", "11 pin terminal block"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-12-5.08"
title = "Screw terminal block, 12 positions, 5.08 mm (MKDS 1,5)"
params = { pitch = 5.08, positions = 12 }
aliases = ["MKDS-1,5-12-5.08", "MKDS 1,5/12-5,08", "12 pin screw terminal 5.08", "12 way terminal block 5.08mm", "12P screw terminal 5.08", "12 position terminal block", "12 pin terminal block"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-13-5.08"
title = "Screw terminal block, 13 positions, 5.08 mm (MKDS 1,5)"
params = { pitch = 5.08, positions = 13 }
aliases = ["MKDS-1,5-13-5.08", "MKDS 1,5/13-5,08", "13 pin screw terminal 5.08", "13 way terminal block 5.08mm", "13P screw terminal 5.08", "13 position terminal block", "13 pin terminal block"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-14-5.08"
title = "Screw terminal block, 14 positions, 5.08 mm (MKDS 1,5)"
params = { pitch = 5.08, positions = 14 }
aliases = ["MKDS-1,5-14-5.08", "MKDS 1,5/14-5,08", "14 pin screw terminal 5.08", "14 way terminal block 5.08mm", "14P screw terminal 5.08", "14 position terminal block", "14 pin terminal block"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-15-5.08"
title = "Screw terminal block, 15 positions, 5.08 mm (MKDS 1,5)"
params = { pitch = 5.08, positions = 15 }
aliases = ["MKDS-1,5-15-5.08", "MKDS 1,5/15-5,08", "15 pin screw terminal 5.08", "15 way terminal block 5.08mm", "15P screw terminal 5.08", "15 position terminal block", "15 pin terminal block"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-16-5.08"
title = "Screw terminal block, 16 positions, 5.08 mm (MKDS 1,5)"
params = { pitch = 5.08, positions = 16 }
aliases = ["MKDS-1,5-16-5.08", "MKDS 1,5/16-5,08", "16 pin screw terminal 5.08", "16 way terminal block 5.08mm", "16P screw terminal 5.08", "16 position terminal block", "16 pin terminal block"]
standard = "Phoenix Contact"

[[presets]]
id = "MKDS1.5-2-5.08-simple"
title = "Screw terminal block, 2 positions, 5.08 mm, simple"
params = { pitch = 5.08, positions = 2, detail = "simple" }
aliases = ["MKDS 1,5/2-5,08 simple"]
standard = "Phoenix Contact"

README.md 18 lines · Markdown

Download

Screw terminal block

A PCB screw terminal block of the Phoenix Contact MKDS 1,5 type, 5.0 or 5.08 mm pitch, 2 to 16 positions. Pin 1 is at the origin, the row runs along +X, the housing sits on the XY plane with the wire entries facing -Y and the screws on top, and the solder pins go down through the board.

Source

Phoenix Contact data sheet, PCB terminal block MKDS 1,5/ 2-5,08 (1715721), a copy at https://uploadcdn.oneyac.com/attachments/files/brand_pdf/phoenixcontact/A4/EA/MKDS152-508.pdf (Phoenix Contact's own site refuses automated downloads). The data sheet is for the 2-position, 5.08 mm part. Dimensions (page 4):

width a + pitch, where a is the distance between the end pins
installed height 13.8, length 9.8
solder pins 3.5 long and 0.9 x 0.9

The dimensional drawing (page 8) shows the pins 4.6 from the wire-entry face, and the same housing with 5 and 5.08 mm pitch.

Proportions, for looks only: the side profile's step and slope, and the wire entry and screw opening sizes. The screws and clamps aren't modelled. The housing is PA; the part uses pa6, green.

The 3.81 mm MKDS, the PT and MPT families and other makers' blocks aren't here yet; see COVERAGE.md.

# Screw terminal block

A PCB screw terminal block of the Phoenix Contact MKDS 1,5 type, 5.0 or 5.08 mm pitch, 2 to 16 positions. Pin 1 is at the origin, the row runs along +X, the housing sits on the XY plane with the wire entries facing -Y and the screws on top, and the solder pins go down through the board.

## Source

Phoenix Contact data sheet, *PCB terminal block MKDS 1,5/ 2-5,08* (1715721), a copy at <https://uploadcdn.oneyac.com/attachments/files/brand_pdf/phoenixcontact/A4/EA/MKDS152-508.pdf> (Phoenix Contact's own site refuses automated downloads). The data sheet is for the 2-position, 5.08 mm part. Dimensions (page 4):

- width a + pitch, where a is the distance between the end pins
- installed height 13.8, length 9.8
- solder pins 3.5 long and 0.9 x 0.9

The dimensional drawing (page 8) shows the pins 4.6 from the wire-entry face, and the same housing with 5 and 5.08 mm pitch.

**Proportions, for looks only:** the side profile's step and slope, and the wire entry and screw opening sizes. The screws and clamps aren't modelled. The housing is PA; the part uses `pa6`, green.

The 3.81 mm MKDS, the PT and MPT families and other makers' blocks aren't here yet; see `COVERAGE.md`.

Use this part

STEVE

Open in STEVE

Open it in STEVE The STEVE runtime runs in STEVE: open the part there, or download the code and bundle.

Get the code

curl -o part.py "https://pythonparts.org/p/steve/screw-terminal-block/v/1.0.0/raw/part.py"

Raw files, bundle and API

curl "https://pythonparts.org/api/v1/parts/steve/screw-terminal-block/1.0.0"

The version's JSON (parameters, presets, files); add /build?name=value for a build at other values.

About this part

steve101 parts

Profile

Polyamide 6 (nylon 6)Plastics · Custom finish · 1.15 g/cm³

Mass: 1.31 g

At the parameters shown in the viewer.

License: MIT

Permissive: use, change and sell it; keep the copyright notice.

Runtime: STEVE
Requirements: None stated in the code
Built with: CadQuery 2.9.0.dev0
Published: Nov 5, 2026
Downloads: 0
Builds: 0
Stars: 0
Bundle: 5f1d37c9b267…

#terminal-block #screw-terminal #phoenix #mkds #connector #electronics

Checks

PassedImports: steve

Every published part passes our checks before it’s listed. It is still code: read it before you use it.

Request a removal A copyright notice, or a trademark, confidential design, safety, malicious code or other problem. Report an illegal or prohibited item

PCB screw terminal block of the MKDS 1,5 type, with wire entries, screw openings and solder pins. Width, height, length and pins from Phoenix Contact's data sheet. See the README.

Screw terminal block

Source

width a + pitch, where a is the distance between the end pins
installed height 13.8, length 9.8
solder pins 3.5 long and 0.9 x 0.9

The dimensional drawing (page 8) shows the pins 4.6 from the wire-entry face, and the same housing with 5 and 5.08 mm pitch.

Proportions, for looks only: the side profile's step and slope, and the wire entry and screw opening sizes. The screws and clamps aren't modelled. The housing is PA; the part uses pa6, green.

The 3.81 mm MKDS, the PT and MPT families and other makers' blocks aren't here yet; see COVERAGE.md.

1.1.0 Latest Nov 5, 2026 · 1 hour ago Compare with 1.0.0

PT 1,5 at 3.5 mm and MPT 0,5 at 2.54 mm. MKDS 1,5 parts are unchanged.
1.0.0 Nov 5, 2026 · 1 hour ago

More #terminal-block

STEVEMIT

steve/pluggable-terminal-header

PCB header for pluggable terminal blocks: right-angle Phoenix Contact MSTBA 2,5 (5.0, 5.08 mm) and MC 1,5 (3.81 mm) types, and vertical MSTBVA 2,5 (5.08 mm), 2 to 16 positions.

0 61 sizes 0 1 hour ago v1.2.0

STEVEMIT

steve/pin-socket

Straight through-hole pin socket, 2.54 mm pitch, one or two rows, 1 to 40 pins per row.

0 81 sizes 0 2 hours ago v1.0.0

STEVEMIT

steve/pin-header

Through-hole pin header, 2.54 mm and 2.00 mm pitch, one or two rows, 1 to 40 pins per row, straight or right-angle.

0 241 sizes 0 2 hours ago v1.1.0

STEVEMIT

steve/jst-xh-header

JST XH shrouded header, 2.5 mm pitch, top entry: B2B-XH-A to B16B-XH-A and B20B-XH-A.

0 17 sizes 0 1 hour ago v1.0.0

steve/screw-terminal-block

Screw terminal block

Source

Screw terminal block

Source

Related parts

steve/pluggable-terminal-header

steve/pin-socket

steve/pin-header

steve/jst-xh-header