steve/screw-end-support

Ball screw end support: BK and BF rectangular, FK and FF round, 6 to 40 mm shafts.

v1.0.0 Latest STEVE MIT 0

Open in STEVE

Isometric

Parameters

Preset33 sizes

Support unit32 options

Detail

fullsimple

full: with mounting holes. simple: outline and bore only.

Defaults built

part.py 100 lines · Python · STEVE runtime · checked

Download

"""Ball screw end support, one solid. BK and BF: rectangular, foot on the XY plane, screw along Y at height h, shaft end towards -Y. FK and FF: round with a

square flange, flange's face on the XY plane, screw along Z. The bearings aren't modelled. Dimensions in the README."""

import math

import cadquery as cq

from steve import Model

designation = "BK10" # Support unit

detail = "full" # full: with the mounting and retainer holes; simple: outline and bore only

# TBI Ball Screw Support Units, Anaheim Automation sheets L011175 (BK), L011178 (BF), L011176 (FK), L011179 (FF).

# BK: (d1, d2, L, L1, L2, L3, C1, C2, B, H, b, h, B1, H1, E, P, X, Y, Z)

BK = {

"BK10": (10, 5.5, 25, 5, 29, 5, 13, 6, 60, 39, 30, 22, 34, 32.5, 15, 46, 6.6, 10.8, 5),

"BK12": (12, 5.5, 25, 5, 29, 5, 13, 6, 60, 43, 30, 25, 34, 32.5, 18, 46, 6.6, 10.8, 1.5),

"BK15": (15, 5.5, 27, 6, 32, 6, 15, 6, 70, 48, 35, 28, 40, 38, 18, 54, 6.6, 11, 6.5),

"BK17": (17, 6.6, 35, 9, 44, 7, 19, 8, 86, 64, 43, 39, 50, 55, 28, 68, 9, 14, 8.5),

"BK20": (20, 6.6, 35, 8, 43, 8, 19, 8, 88, 60, 44, 34, 52, 50, 22, 70, 9, 14, 8.5),

"BK25": (25, 9.0, 42, 12, 54, 9, 22, 10, 106, 80, 53, 48, 64, 70, 33, 85, 11, 17.5, 11),

"BK30": (30, 11, 45, 14, 61, 9, 23, 11, 128, 89, 64, 51, 76, 78, 33, 102, 14, 20, 13),

"BK35": (35, 11, 50, 14, 67, 12, 26, 12, 140, 96, 70, 52, 88, 79, 35, 114, 14, 20, 13),

"BK40": (40, 14, 61, 18, 76, 15, 33, 14, 160, 110, 80, 60, 100, 90, 37, 130, 18, 26, 17.5),

}

# BF: (d1, L, B, H, b, h, B1, H1, E, P, d2, X, Y, Z)

BF = {

"BF10": (8, 20, 60, 39, 30, 22, 34, 32.5, 15, 46, 5.5, 6.6, 10.8, 5), "BF12": (10, 20, 60, 43, 30, 25, 34, 32.5, 18, 46, 5.5, 6.6, 10.8, 1.5),

"BF15": (15, 20, 70, 48, 35, 28, 40, 38, 18, 54, 5.5, 6.6, 11, 6.5), "BF17": (17, 23, 86, 64, 43, 39, 50, 55, 28, 68, 6.6, 9, 14, 8.5),

"BF20": (20, 26, 88, 60, 44, 34, 52, 50, 22, 70, 6.6, 9, 14, 8.5), "BF25": (25, 30, 106, 80, 53, 48, 64, 70, 33, 85, 9, 11, 17.5, 11),

"BF30": (30, 32, 128, 89, 64, 51, 76, 78, 33, 102, 11, 14, 20, 13), "BF35": (35, 32, 140, 96, 70, 52, 88, 79, 35, 114, 11, 14, 20, 13),

"BF40": (40, 37, 160, 110, 80, 60, 100, 90, 37, 130, 14, 18, 26, 17.5),

}

# FK: (d1, L, H, F, E, D, A, PCD, B, L1, T1, X, Y, Z)

FK = {

"FK8": (8, 23, 9, 14, 26, 28, 43, 35, 35, 7, 4, 3.4, 6.5, 4), "FK10": (10, 27, 10, 17, 29.5, 34, 52, 42, 42, 7.5, 5, 4.5, 8, 4),

"FK12": (12, 27, 10, 17, 29.5, 36, 54, 44, 44, 7.5, 5, 4.5, 8, 4), "FK15": (15, 32, 15, 17, 36, 40, 63, 50, 52, 10, 6, 5.5, 9.5, 6),

"FK20": (20, 52, 22, 30, 50, 57, 85, 70, 68, 8, 10, 6.6, 11, 10), "FK25": (25, 57, 27, 30, 60, 63, 98, 80, 79, 13, 10, 9, 15, 13),

"FK30": (30, 62, 30, 32, 61, 75, 117, 95, 93, 11, 12, 11, 17.5, 15),

}

# FF: (d1, L, H, F, D, A, PCD, B, X, Y, Z)

FF = {

"FF6": (6, 10, 6, 4, 22, 36, 28, 28, 3.4, 6.5, 4), "FF10": (8, 12, 7, 5, 28, 43, 35, 35, 3.4, 6.5, 4), "FF12": (10, 15, 7, 8, 34, 52, 42, 42, 4.5, 8, 4),

"FF15": (15, 17, 9, 8, 40, 63, 50, 52, 5.5, 9.5, 5.5), "FF20": (20, 20, 11, 9, 57, 85, 70, 68, 6.6, 11, 6.5),

"FF25": (25, 24, 14, 10, 63, 98, 80, 79, 9, 14, 8.5), "FF30": (30, 27, 18, 9, 75, 117, 95, 93, 11, 17.5, 11),

}

def rectangular(d1, L, B, H, h, B1, H1, E, P, d2, X, Y, Z, collar):

"""The wings to H1 and the centre block to H, extruded from y = 0 to L, with a shaft-end collar towards -Y when collar > 0."""

outline = [(-B / 2, 0), (B / 2, 0), (B / 2, H1), (B1 / 2, H1), (B1 / 2, H), (-B1 / 2, H), (-B1 / 2, H1), (-B / 2, H1)]

body = cq.Workplane("XZ").polyline(outline).close().extrude(-L)

if collar:

body = body.union(cq.Workplane("XZ").center(0, h).circle(0.8 * d1 + 2).extrude(collar), clean=False)

body = body.cut(cq.Workplane("XZ").workplane(offset=collar + 1).center(0, h).circle(d1 / 2).extrude(-(L + collar + 2)))

if detail == "full":

low = (H1 - E) / 2 # the pair of wing holes is centred on the wing, for looks: the sheet gives E between them, not their height

for x in (-P / 2, P / 2):

for z in (low, low + E):

body = body.cut(cq.Workplane("XZ").workplane(offset=1).center(x, z).circle(d2 / 2).extrude(-(L + 2)))

reach = B1 / 2 - Y / 2 - 0.5 # the block's four counterbored holes: X, Y and Z are the sheet's, their places a proportion, for looks

for x in (-reach, reach):

for z in (h - reach, h + reach):

if z + Y / 2 < H and z - Y / 2 > 0:

body = body.cut(cq.Workplane("XZ").workplane(offset=1).center(x, z).circle(X / 2).extrude(-(L + 2)))

body = body.cut(cq.Workplane("XZ").workplane(offset=-L + Z).center(x, z).circle(Y / 2).extrude(-(Z + 1)))

return body

def round_unit(d1, L, H, D, A, PCD, B, X, Y, Z, collar):

"""The flange (the square B cut by the circle A) from z = 0 to H, the body D to L, and a shaft-end collar below when collar > 0."""

flange = cq.Workplane("XY").rect(B, B).extrude(H).intersect(cq.Workplane("XY").circle(A / 2).extrude(H))

body = flange.union(cq.Workplane("XY").circle(D / 2).extrude(L), clean=False)

if collar:

body = body.union(cq.Workplane("XY").workplane(offset=-collar).circle(0.8 * d1 + 2).extrude(collar), clean=False)

body = body.cut(cq.Workplane("XY").workplane(offset=-collar - 1).circle(d1 / 2).extrude(L + collar + 2))

if detail == "full":

at = PCD / 2 / math.sqrt(2)

for x in (-at, at):

for y in (-at, at):

body = body.cut(cq.Workplane("XY").workplane(offset=-1).center(x, y).circle(X / 2).extrude(H + 2))

body = body.cut(cq.Workplane("XY").workplane(offset=H - Z).center(x, y).circle(Y / 2).extrude(Z + 1))

return body

model = Model()

if designation in BK:

d1, d2, L, L1, L2, L3, C1, C2, B, H, b, h, B1, H1, E, P, X, Y, Z = BK[designation]

shape = rectangular(d1, L, B, H, h, B1, H1, E, P, d2, X, Y, Z, L1)

elif designation in BF:

d1, L, B, H, b, h, B1, H1, E, P, d2, X, Y, Z = BF[designation]

shape = rectangular(d1, L, B, H, h, B1, H1, E, P, d2, X, Y, Z, 0)

elif designation in FK:

d1, L, H, F, E, D, A, PCD, B, L1, T1, X, Y, Z = FK[designation]

shape = round_unit(d1, L, H, D, A, PCD, B, X, Y, Z, L1)

else:

d1, L, H, F, D, A, PCD, B, X, Y, Z = FF[designation]

shape = round_unit(d1, L, H, D, A, PCD, B, X, Y, Z, 0)

model.add("body", shape, name="Support unit")

model.material("steel-generic", color="#26282b")

result = model.result()

100

"""Ball screw end support, one solid. BK and BF: rectangular, foot on the XY plane, screw along Y at height h, shaft end towards -Y. FK and FF: round with a
square flange, flange's face on the XY plane, screw along Z. The bearings aren't modelled. Dimensions in the README."""
import math

import cadquery as cq
from steve import Model

designation = "BK10"  # Support unit
detail = "full"  # full: with the mounting and retainer holes; simple: outline and bore only

# TBI Ball Screw Support Units, Anaheim Automation sheets L011175 (BK), L011178 (BF), L011176 (FK), L011179 (FF).
# BK: (d1, d2, L, L1, L2, L3, C1, C2, B, H, b, h, B1, H1, E, P, X, Y, Z)
BK = {
    "BK10": (10, 5.5, 25, 5, 29, 5, 13, 6, 60, 39, 30, 22, 34, 32.5, 15, 46, 6.6, 10.8, 5),
    "BK12": (12, 5.5, 25, 5, 29, 5, 13, 6, 60, 43, 30, 25, 34, 32.5, 18, 46, 6.6, 10.8, 1.5),
    "BK15": (15, 5.5, 27, 6, 32, 6, 15, 6, 70, 48, 35, 28, 40, 38, 18, 54, 6.6, 11, 6.5),
    "BK17": (17, 6.6, 35, 9, 44, 7, 19, 8, 86, 64, 43, 39, 50, 55, 28, 68, 9, 14, 8.5),
    "BK20": (20, 6.6, 35, 8, 43, 8, 19, 8, 88, 60, 44, 34, 52, 50, 22, 70, 9, 14, 8.5),
    "BK25": (25, 9.0, 42, 12, 54, 9, 22, 10, 106, 80, 53, 48, 64, 70, 33, 85, 11, 17.5, 11),
    "BK30": (30, 11, 45, 14, 61, 9, 23, 11, 128, 89, 64, 51, 76, 78, 33, 102, 14, 20, 13),
    "BK35": (35, 11, 50, 14, 67, 12, 26, 12, 140, 96, 70, 52, 88, 79, 35, 114, 14, 20, 13),
    "BK40": (40, 14, 61, 18, 76, 15, 33, 14, 160, 110, 80, 60, 100, 90, 37, 130, 18, 26, 17.5),
}
# BF: (d1, L, B, H, b, h, B1, H1, E, P, d2, X, Y, Z)
BF = {
    "BF10": (8, 20, 60, 39, 30, 22, 34, 32.5, 15, 46, 5.5, 6.6, 10.8, 5), "BF12": (10, 20, 60, 43, 30, 25, 34, 32.5, 18, 46, 5.5, 6.6, 10.8, 1.5),
    "BF15": (15, 20, 70, 48, 35, 28, 40, 38, 18, 54, 5.5, 6.6, 11, 6.5), "BF17": (17, 23, 86, 64, 43, 39, 50, 55, 28, 68, 6.6, 9, 14, 8.5),
    "BF20": (20, 26, 88, 60, 44, 34, 52, 50, 22, 70, 6.6, 9, 14, 8.5), "BF25": (25, 30, 106, 80, 53, 48, 64, 70, 33, 85, 9, 11, 17.5, 11),
    "BF30": (30, 32, 128, 89, 64, 51, 76, 78, 33, 102, 11, 14, 20, 13), "BF35": (35, 32, 140, 96, 70, 52, 88, 79, 35, 114, 11, 14, 20, 13),
    "BF40": (40, 37, 160, 110, 80, 60, 100, 90, 37, 130, 14, 18, 26, 17.5),
}
# FK: (d1, L, H, F, E, D, A, PCD, B, L1, T1, X, Y, Z)
FK = {
    "FK8": (8, 23, 9, 14, 26, 28, 43, 35, 35, 7, 4, 3.4, 6.5, 4), "FK10": (10, 27, 10, 17, 29.5, 34, 52, 42, 42, 7.5, 5, 4.5, 8, 4),
    "FK12": (12, 27, 10, 17, 29.5, 36, 54, 44, 44, 7.5, 5, 4.5, 8, 4), "FK15": (15, 32, 15, 17, 36, 40, 63, 50, 52, 10, 6, 5.5, 9.5, 6),
    "FK20": (20, 52, 22, 30, 50, 57, 85, 70, 68, 8, 10, 6.6, 11, 10), "FK25": (25, 57, 27, 30, 60, 63, 98, 80, 79, 13, 10, 9, 15, 13),
    "FK30": (30, 62, 30, 32, 61, 75, 117, 95, 93, 11, 12, 11, 17.5, 15),
}
# FF: (d1, L, H, F, D, A, PCD, B, X, Y, Z)
FF = {
    "FF6": (6, 10, 6, 4, 22, 36, 28, 28, 3.4, 6.5, 4), "FF10": (8, 12, 7, 5, 28, 43, 35, 35, 3.4, 6.5, 4), "FF12": (10, 15, 7, 8, 34, 52, 42, 42, 4.5, 8, 4),
    "FF15": (15, 17, 9, 8, 40, 63, 50, 52, 5.5, 9.5, 5.5), "FF20": (20, 20, 11, 9, 57, 85, 70, 68, 6.6, 11, 6.5),
    "FF25": (25, 24, 14, 10, 63, 98, 80, 79, 9, 14, 8.5), "FF30": (30, 27, 18, 9, 75, 117, 95, 93, 11, 17.5, 11),
}


def rectangular(d1, L, B, H, h, B1, H1, E, P, d2, X, Y, Z, collar):
    """The wings to H1 and the centre block to H, extruded from y = 0 to L, with a shaft-end collar towards -Y when collar > 0."""
    outline = [(-B / 2, 0), (B / 2, 0), (B / 2, H1), (B1 / 2, H1), (B1 / 2, H), (-B1 / 2, H), (-B1 / 2, H1), (-B / 2, H1)]
    body = cq.Workplane("XZ").polyline(outline).close().extrude(-L)
    if collar:
        body = body.union(cq.Workplane("XZ").center(0, h).circle(0.8 * d1 + 2).extrude(collar), clean=False)
    body = body.cut(cq.Workplane("XZ").workplane(offset=collar + 1).center(0, h).circle(d1 / 2).extrude(-(L + collar + 2)))
    if detail == "full":
        low = (H1 - E) / 2   # the pair of wing holes is centred on the wing, for looks: the sheet gives E between them, not their height
        for x in (-P / 2, P / 2):
            for z in (low, low + E):
                body = body.cut(cq.Workplane("XZ").workplane(offset=1).center(x, z).circle(d2 / 2).extrude(-(L + 2)))
        reach = B1 / 2 - Y / 2 - 0.5   # the block's four counterbored holes: X, Y and Z are the sheet's, their places a proportion, for looks
        for x in (-reach, reach):
            for z in (h - reach, h + reach):
                if z + Y / 2 < H and z - Y / 2 > 0:
                    body = body.cut(cq.Workplane("XZ").workplane(offset=1).center(x, z).circle(X / 2).extrude(-(L + 2)))
                    body = body.cut(cq.Workplane("XZ").workplane(offset=-L + Z).center(x, z).circle(Y / 2).extrude(-(Z + 1)))
    return body


def round_unit(d1, L, H, D, A, PCD, B, X, Y, Z, collar):
    """The flange (the square B cut by the circle A) from z = 0 to H, the body D to L, and a shaft-end collar below when collar > 0."""
    flange = cq.Workplane("XY").rect(B, B).extrude(H).intersect(cq.Workplane("XY").circle(A / 2).extrude(H))
    body = flange.union(cq.Workplane("XY").circle(D / 2).extrude(L), clean=False)
    if collar:
        body = body.union(cq.Workplane("XY").workplane(offset=-collar).circle(0.8 * d1 + 2).extrude(collar), clean=False)
    body = body.cut(cq.Workplane("XY").workplane(offset=-collar - 1).circle(d1 / 2).extrude(L + collar + 2))
    if detail == "full":
        at = PCD / 2 / math.sqrt(2)
        for x in (-at, at):
            for y in (-at, at):
                body = body.cut(cq.Workplane("XY").workplane(offset=-1).center(x, y).circle(X / 2).extrude(H + 2))
                body = body.cut(cq.Workplane("XY").workplane(offset=H - Z).center(x, y).circle(Y / 2).extrude(Z + 1))
    return body


model = Model()
if designation in BK:
    d1, d2, L, L1, L2, L3, C1, C2, B, H, b, h, B1, H1, E, P, X, Y, Z = BK[designation]
    shape = rectangular(d1, L, B, H, h, B1, H1, E, P, d2, X, Y, Z, L1)
elif designation in BF:
    d1, L, B, H, b, h, B1, H1, E, P, d2, X, Y, Z = BF[designation]
    shape = rectangular(d1, L, B, H, h, B1, H1, E, P, d2, X, Y, Z, 0)
elif designation in FK:
    d1, L, H, F, E, D, A, PCD, B, L1, T1, X, Y, Z = FK[designation]
    shape = round_unit(d1, L, H, D, A, PCD, B, X, Y, Z, L1)
else:
    d1, L, H, F, D, A, PCD, B, X, Y, Z = FF[designation]
    shape = round_unit(d1, L, H, D, A, PCD, B, X, Y, Z, 0)
model.add("body", shape, name="Support unit")
model.material("steel-generic", color="#26282b")
result = model.result()

pypart.toml 21 lines · TOML

Download

name = "steve/screw-end-support"

version = "1.0.0"

runtime = "steve"

license = "MIT"

summary = "Ball screw end support: BK and BF rectangular, FK and FF round, 6 to 40 mm shafts."

description = """Ball screw end support unit as one solid: BK fixed and BF support side rectangular, FK fixed and FF support side round. Outer dimensions, bore and holes from TBI's sheets. See the README."""

tags = ["ball-screw", "end-support", "bk", "bf", "fk", "ff", "motion", "metric"]

[parameters.designation]

type = "choice"

default = "BK10"

choices = ["BK10", "BK12", "BK15", "BK17", "BK20", "BK25", "BK30", "BK35", "BK40", "BF10", "BF12", "BF15", "BF17", "BF20", "BF25", "BF30", "BF35", "BF40", "FK8", "FK10", "FK12", "FK15", "FK20", "FK25", "FK30", "FF6", "FF10", "FF12", "FF15", "FF20", "FF25", "FF30"]

label = "Support unit"

[parameters.detail]

type = "choice"

default = "full"

choices = ["full", "simple"]

label = "Detail"

description = "full: with mounting holes. simple: outline and bore only."

name = "steve/screw-end-support"
version = "1.0.0"
runtime = "steve"
license = "MIT"
summary = "Ball screw end support: BK and BF rectangular, FK and FF round, 6 to 40 mm shafts."
description = """Ball screw end support unit as one solid: BK fixed and BF support side rectangular, FK fixed and FF support side round. Outer dimensions, bore and holes from TBI's sheets. See the README."""
tags = ["ball-screw", "end-support", "bk", "bf", "fk", "ff", "motion", "metric"]

[parameters.designation]
type = "choice"
default = "BK10"
choices = ["BK10", "BK12", "BK15", "BK17", "BK20", "BK25", "BK30", "BK35", "BK40", "BF10", "BF12", "BF15", "BF17", "BF20", "BF25", "BF30", "BF35", "BF40", "FK8", "FK10", "FK12", "FK15", "FK20", "FK25", "FK30", "FF6", "FF10", "FF12", "FF15", "FF20", "FF25", "FF30"]
label = "Support unit"

[parameters.detail]
type = "choice"
default = "full"
choices = ["full", "simple"]
label = "Detail"
description = "full: with mounting holes. simple: outline and bore only."

presets.toml 233 lines · TOML

Download

# Presets of this part (factory/PRESETS.md). Written by factory/gen.py.

[[presets]]

id = "BF10"

title = "BF10 ball screw end support, support side"

params = { designation = "BF10" }

aliases = ["BF10", "screw support block=BF10; generic bearing/support envelope", "BF10 support", "BF10 end support", "BF10 ball screw support", "BF10 support unit"]

standard = "TBI"

[[presets]]

id = "BF12"

title = "BF12 ball screw end support, support side"

params = { designation = "BF12" }

aliases = ["BF12", "screw support block=BF12; generic bearing/support envelope", "BF12 support", "BF12 end support", "BF12 ball screw support", "BF12 support unit"]

standard = "TBI"

[[presets]]

id = "BF15"

title = "BF15 ball screw end support, support side"

params = { designation = "BF15" }

aliases = ["BF15", "screw support block=BF15; generic bearing/support envelope", "BF15 support", "BF15 end support", "BF15 ball screw support", "BF15 support unit"]

standard = "TBI"

[[presets]]

id = "BF17"

title = "BF17 ball screw end support, support side"

params = { designation = "BF17" }

aliases = ["BF17", "screw support block=BF17; generic bearing/support envelope", "BF17 support", "BF17 end support", "BF17 ball screw support", "BF17 support unit"]

standard = "TBI"

[[presets]]

id = "BF20"

title = "BF20 ball screw end support, support side"

params = { designation = "BF20" }

aliases = ["BF20", "screw support block=BF20; generic bearing/support envelope", "BF20 support", "BF20 end support", "BF20 ball screw support", "BF20 support unit"]

standard = "TBI"

[[presets]]

id = "BF25"

title = "BF25 ball screw end support, support side"

params = { designation = "BF25" }

aliases = ["BF25", "screw support block=BF25; generic bearing/support envelope", "BF25 support", "BF25 end support", "BF25 ball screw support", "BF25 support unit"]

standard = "TBI"

[[presets]]

id = "BK10"

title = "BK10 ball screw end support, fixed side"

params = { designation = "BK10" }

aliases = ["BK10", "screw support block=BK10; generic bearing/support envelope", "BK10 support", "BK10 end support", "BK10 ball screw support", "BK10 support unit"]

standard = "TBI"

[[presets]]

id = "BK12"

title = "BK12 ball screw end support, fixed side"

params = { designation = "BK12" }

aliases = ["BK12", "screw support block=BK12; generic bearing/support envelope", "BK12 support", "BK12 end support", "BK12 ball screw support", "BK12 support unit"]

standard = "TBI"

[[presets]]

id = "BK15"

title = "BK15 ball screw end support, fixed side"

params = { designation = "BK15" }

aliases = ["BK15", "screw support block=BK15; generic bearing/support envelope", "BK15 support", "BK15 end support", "BK15 ball screw support", "BK15 support unit"]

standard = "TBI"

[[presets]]

id = "BK17"

title = "BK17 ball screw end support, fixed side"

params = { designation = "BK17" }

aliases = ["BK17", "screw support block=BK17; generic bearing/support envelope", "BK17 support", "BK17 end support", "BK17 ball screw support", "BK17 support unit"]

standard = "TBI"

[[presets]]

id = "BK20"

title = "BK20 ball screw end support, fixed side"

params = { designation = "BK20" }

aliases = ["BK20", "screw support block=BK20; generic bearing/support envelope", "BK20 support", "BK20 end support", "BK20 ball screw support", "BK20 support unit"]

standard = "TBI"

[[presets]]

id = "BK25"

title = "BK25 ball screw end support, fixed side"

params = { designation = "BK25" }

aliases = ["BK25", "screw support block=BK25; generic bearing/support envelope", "BK25 support", "BK25 end support", "BK25 ball screw support", "BK25 support unit"]

standard = "TBI"

[[presets]]

id = "FF10"

title = "FF10 ball screw end support, support side"

params = { designation = "FF10" }

aliases = ["FF10", "screw support block=FF10; generic bearing/support envelope", "FF10 support", "FF10 end support", "FF10 ball screw support", "FF10 support unit"]

standard = "TBI"

[[presets]]

id = "FF12"

title = "FF12 ball screw end support, support side"

params = { designation = "FF12" }

aliases = ["FF12", "screw support block=FF12; generic bearing/support envelope", "FF12 support", "FF12 end support", "FF12 ball screw support", "FF12 support unit"]

standard = "TBI"

100

101

[[presets]]

102

id = "FF15"

103

title = "FF15 ball screw end support, support side"

104

params = { designation = "FF15" }

105

aliases = ["FF15", "screw support block=FF15; generic bearing/support envelope", "FF15 support", "FF15 end support", "FF15 ball screw support", "FF15 support unit"]

106

standard = "TBI"

107

108

[[presets]]

109

id = "FF20"

110

title = "FF20 ball screw end support, support side"

111

params = { designation = "FF20" }

112

aliases = ["FF20", "screw support block=FF20; generic bearing/support envelope", "FF20 support", "FF20 end support", "FF20 ball screw support", "FF20 support unit"]

113

standard = "TBI"

114

115

[[presets]]

116

id = "FF25"

117

title = "FF25 ball screw end support, support side"

118

params = { designation = "FF25" }

119

aliases = ["FF25", "screw support block=FF25; generic bearing/support envelope", "FF25 support", "FF25 end support", "FF25 ball screw support", "FF25 support unit"]

120

standard = "TBI"

121

122

[[presets]]

123

id = "FK8"

124

title = "FK8 ball screw end support, fixed side"

125

params = { designation = "FK8" }

126

aliases = ["FK8", "screw support block=FK8; generic bearing/support envelope", "FK8 support", "FK8 end support", "FK8 ball screw support", "FK8 support unit"]

127

standard = "TBI"

128

129

[[presets]]

130

id = "FK10"

131

title = "FK10 ball screw end support, fixed side"

132

params = { designation = "FK10" }

133

aliases = ["FK10", "screw support block=FK10; generic bearing/support envelope", "FK10 support", "FK10 end support", "FK10 ball screw support", "FK10 support unit"]

134

standard = "TBI"

135

136

[[presets]]

137

id = "FK12"

138

title = "FK12 ball screw end support, fixed side"

139

params = { designation = "FK12" }

140

aliases = ["FK12", "screw support block=FK12; generic bearing/support envelope", "FK12 support", "FK12 end support", "FK12 ball screw support", "FK12 support unit"]

141

standard = "TBI"

142

143

[[presets]]

144

id = "FK15"

145

title = "FK15 ball screw end support, fixed side"

146

params = { designation = "FK15" }

147

aliases = ["FK15", "screw support block=FK15; generic bearing/support envelope", "FK15 support", "FK15 end support", "FK15 ball screw support", "FK15 support unit"]

148

standard = "TBI"

149

150

[[presets]]

151

id = "FK20"

152

title = "FK20 ball screw end support, fixed side"

153

params = { designation = "FK20" }

154

aliases = ["FK20", "screw support block=FK20; generic bearing/support envelope", "FK20 support", "FK20 end support", "FK20 ball screw support", "FK20 support unit"]

155

standard = "TBI"

156

157

[[presets]]

158

id = "FK25"

159

title = "FK25 ball screw end support, fixed side"

160

params = { designation = "FK25" }

161

aliases = ["FK25", "screw support block=FK25; generic bearing/support envelope", "FK25 support", "FK25 end support", "FK25 ball screw support", "FK25 support unit"]

162

standard = "TBI"

163

164

[[presets]]

165

id = "BK30"

166

title = "BK30 ball screw end support, fixed side"

167

params = { designation = "BK30" }

168

aliases = ["BK30 support", "BK30 end support", "BK30 ball screw support", "BK30 support unit"]

169

standard = "TBI"

170

171

[[presets]]

172

id = "BK35"

173

title = "BK35 ball screw end support, fixed side"

174

params = { designation = "BK35" }

175

aliases = ["BK35 support", "BK35 end support", "BK35 ball screw support", "BK35 support unit"]

176

standard = "TBI"

177

178

[[presets]]

179

id = "BK40"

180

title = "BK40 ball screw end support, fixed side"

181

params = { designation = "BK40" }

182

aliases = ["BK40 support", "BK40 end support", "BK40 ball screw support", "BK40 support unit"]

183

standard = "TBI"

184

185

[[presets]]

186

id = "BF30"

187

title = "BF30 ball screw end support, support side"

188

params = { designation = "BF30" }

189

aliases = ["BF30 support", "BF30 end support", "BF30 ball screw support", "BF30 support unit"]

190

standard = "TBI"

191

192

[[presets]]

193

id = "BF35"

194

title = "BF35 ball screw end support, support side"

195

params = { designation = "BF35" }

196

aliases = ["BF35 support", "BF35 end support", "BF35 ball screw support", "BF35 support unit"]

197

standard = "TBI"

198

199

[[presets]]

200

id = "BF40"

201

title = "BF40 ball screw end support, support side"

202

params = { designation = "BF40" }

203

aliases = ["BF40 support", "BF40 end support", "BF40 ball screw support", "BF40 support unit"]

204

standard = "TBI"

205

206

[[presets]]

207

id = "FK30"

208

title = "FK30 ball screw end support, fixed side"

209

params = { designation = "FK30" }

210

aliases = ["FK30 support", "FK30 end support", "FK30 ball screw support", "FK30 support unit"]

211

standard = "TBI"

212

213

[[presets]]

214

id = "FF6"

215

title = "FF6 ball screw end support, support side"

216

params = { designation = "FF6" }

217

aliases = ["FF6 support", "FF6 end support", "FF6 ball screw support", "FF6 support unit"]

218

standard = "TBI"

219

220

[[presets]]

221

id = "FF30"

222

title = "FF30 ball screw end support, support side"

223

params = { designation = "FF30" }

224

aliases = ["FF30 support", "FF30 end support", "FF30 ball screw support", "FF30 support unit"]

225

standard = "TBI"

226

227

[[presets]]

228

id = "BK12-simple"

229

title = "BK12, simple"

230

params = { designation = "BK12", detail = "simple" }

231

aliases = ["BK12 simple"]

232

standard = "TBI"

233

# Presets of this part (factory/PRESETS.md). Written by factory/gen.py.

[[presets]]
id = "BF10"
title = "BF10 ball screw end support, support side"
params = { designation = "BF10" }
aliases = ["BF10", "screw support block=BF10; generic bearing/support envelope", "BF10 support", "BF10 end support", "BF10 ball screw support", "BF10 support unit"]
standard = "TBI"

[[presets]]
id = "BF12"
title = "BF12 ball screw end support, support side"
params = { designation = "BF12" }
aliases = ["BF12", "screw support block=BF12; generic bearing/support envelope", "BF12 support", "BF12 end support", "BF12 ball screw support", "BF12 support unit"]
standard = "TBI"

[[presets]]
id = "BF15"
title = "BF15 ball screw end support, support side"
params = { designation = "BF15" }
aliases = ["BF15", "screw support block=BF15; generic bearing/support envelope", "BF15 support", "BF15 end support", "BF15 ball screw support", "BF15 support unit"]
standard = "TBI"

[[presets]]
id = "BF17"
title = "BF17 ball screw end support, support side"
params = { designation = "BF17" }
aliases = ["BF17", "screw support block=BF17; generic bearing/support envelope", "BF17 support", "BF17 end support", "BF17 ball screw support", "BF17 support unit"]
standard = "TBI"

[[presets]]
id = "BF20"
title = "BF20 ball screw end support, support side"
params = { designation = "BF20" }
aliases = ["BF20", "screw support block=BF20; generic bearing/support envelope", "BF20 support", "BF20 end support", "BF20 ball screw support", "BF20 support unit"]
standard = "TBI"

[[presets]]
id = "BF25"
title = "BF25 ball screw end support, support side"
params = { designation = "BF25" }
aliases = ["BF25", "screw support block=BF25; generic bearing/support envelope", "BF25 support", "BF25 end support", "BF25 ball screw support", "BF25 support unit"]
standard = "TBI"

[[presets]]
id = "BK10"
title = "BK10 ball screw end support, fixed side"
params = { designation = "BK10" }
aliases = ["BK10", "screw support block=BK10; generic bearing/support envelope", "BK10 support", "BK10 end support", "BK10 ball screw support", "BK10 support unit"]
standard = "TBI"

[[presets]]
id = "BK12"
title = "BK12 ball screw end support, fixed side"
params = { designation = "BK12" }
aliases = ["BK12", "screw support block=BK12; generic bearing/support envelope", "BK12 support", "BK12 end support", "BK12 ball screw support", "BK12 support unit"]
standard = "TBI"

[[presets]]
id = "BK15"
title = "BK15 ball screw end support, fixed side"
params = { designation = "BK15" }
aliases = ["BK15", "screw support block=BK15; generic bearing/support envelope", "BK15 support", "BK15 end support", "BK15 ball screw support", "BK15 support unit"]
standard = "TBI"

[[presets]]
id = "BK17"
title = "BK17 ball screw end support, fixed side"
params = { designation = "BK17" }
aliases = ["BK17", "screw support block=BK17; generic bearing/support envelope", "BK17 support", "BK17 end support", "BK17 ball screw support", "BK17 support unit"]
standard = "TBI"

[[presets]]
id = "BK20"
title = "BK20 ball screw end support, fixed side"
params = { designation = "BK20" }
aliases = ["BK20", "screw support block=BK20; generic bearing/support envelope", "BK20 support", "BK20 end support", "BK20 ball screw support", "BK20 support unit"]
standard = "TBI"

[[presets]]
id = "BK25"
title = "BK25 ball screw end support, fixed side"
params = { designation = "BK25" }
aliases = ["BK25", "screw support block=BK25; generic bearing/support envelope", "BK25 support", "BK25 end support", "BK25 ball screw support", "BK25 support unit"]
standard = "TBI"

[[presets]]
id = "FF10"
title = "FF10 ball screw end support, support side"
params = { designation = "FF10" }
aliases = ["FF10", "screw support block=FF10; generic bearing/support envelope", "FF10 support", "FF10 end support", "FF10 ball screw support", "FF10 support unit"]
standard = "TBI"

[[presets]]
id = "FF12"
title = "FF12 ball screw end support, support side"
params = { designation = "FF12" }
aliases = ["FF12", "screw support block=FF12; generic bearing/support envelope", "FF12 support", "FF12 end support", "FF12 ball screw support", "FF12 support unit"]
standard = "TBI"

[[presets]]
id = "FF15"
title = "FF15 ball screw end support, support side"
params = { designation = "FF15" }
aliases = ["FF15", "screw support block=FF15; generic bearing/support envelope", "FF15 support", "FF15 end support", "FF15 ball screw support", "FF15 support unit"]
standard = "TBI"

[[presets]]
id = "FF20"
title = "FF20 ball screw end support, support side"
params = { designation = "FF20" }
aliases = ["FF20", "screw support block=FF20; generic bearing/support envelope", "FF20 support", "FF20 end support", "FF20 ball screw support", "FF20 support unit"]
standard = "TBI"

[[presets]]
id = "FF25"
title = "FF25 ball screw end support, support side"
params = { designation = "FF25" }
aliases = ["FF25", "screw support block=FF25; generic bearing/support envelope", "FF25 support", "FF25 end support", "FF25 ball screw support", "FF25 support unit"]
standard = "TBI"

[[presets]]
id = "FK8"
title = "FK8 ball screw end support, fixed side"
params = { designation = "FK8" }
aliases = ["FK8", "screw support block=FK8; generic bearing/support envelope", "FK8 support", "FK8 end support", "FK8 ball screw support", "FK8 support unit"]
standard = "TBI"

[[presets]]
id = "FK10"
title = "FK10 ball screw end support, fixed side"
params = { designation = "FK10" }
aliases = ["FK10", "screw support block=FK10; generic bearing/support envelope", "FK10 support", "FK10 end support", "FK10 ball screw support", "FK10 support unit"]
standard = "TBI"

[[presets]]
id = "FK12"
title = "FK12 ball screw end support, fixed side"
params = { designation = "FK12" }
aliases = ["FK12", "screw support block=FK12; generic bearing/support envelope", "FK12 support", "FK12 end support", "FK12 ball screw support", "FK12 support unit"]
standard = "TBI"

[[presets]]
id = "FK15"
title = "FK15 ball screw end support, fixed side"
params = { designation = "FK15" }
aliases = ["FK15", "screw support block=FK15; generic bearing/support envelope", "FK15 support", "FK15 end support", "FK15 ball screw support", "FK15 support unit"]
standard = "TBI"

[[presets]]
id = "FK20"
title = "FK20 ball screw end support, fixed side"
params = { designation = "FK20" }
aliases = ["FK20", "screw support block=FK20; generic bearing/support envelope", "FK20 support", "FK20 end support", "FK20 ball screw support", "FK20 support unit"]
standard = "TBI"

[[presets]]
id = "FK25"
title = "FK25 ball screw end support, fixed side"
params = { designation = "FK25" }
aliases = ["FK25", "screw support block=FK25; generic bearing/support envelope", "FK25 support", "FK25 end support", "FK25 ball screw support", "FK25 support unit"]
standard = "TBI"

[[presets]]
id = "BK30"
title = "BK30 ball screw end support, fixed side"
params = { designation = "BK30" }
aliases = ["BK30 support", "BK30 end support", "BK30 ball screw support", "BK30 support unit"]
standard = "TBI"

[[presets]]
id = "BK35"
title = "BK35 ball screw end support, fixed side"
params = { designation = "BK35" }
aliases = ["BK35 support", "BK35 end support", "BK35 ball screw support", "BK35 support unit"]
standard = "TBI"

[[presets]]
id = "BK40"
title = "BK40 ball screw end support, fixed side"
params = { designation = "BK40" }
aliases = ["BK40 support", "BK40 end support", "BK40 ball screw support", "BK40 support unit"]
standard = "TBI"

[[presets]]
id = "BF30"
title = "BF30 ball screw end support, support side"
params = { designation = "BF30" }
aliases = ["BF30 support", "BF30 end support", "BF30 ball screw support", "BF30 support unit"]
standard = "TBI"

[[presets]]
id = "BF35"
title = "BF35 ball screw end support, support side"
params = { designation = "BF35" }
aliases = ["BF35 support", "BF35 end support", "BF35 ball screw support", "BF35 support unit"]
standard = "TBI"

[[presets]]
id = "BF40"
title = "BF40 ball screw end support, support side"
params = { designation = "BF40" }
aliases = ["BF40 support", "BF40 end support", "BF40 ball screw support", "BF40 support unit"]
standard = "TBI"

[[presets]]
id = "FK30"
title = "FK30 ball screw end support, fixed side"
params = { designation = "FK30" }
aliases = ["FK30 support", "FK30 end support", "FK30 ball screw support", "FK30 support unit"]
standard = "TBI"

[[presets]]
id = "FF6"
title = "FF6 ball screw end support, support side"
params = { designation = "FF6" }
aliases = ["FF6 support", "FF6 end support", "FF6 ball screw support", "FF6 support unit"]
standard = "TBI"

[[presets]]
id = "FF30"
title = "FF30 ball screw end support, support side"
params = { designation = "FF30" }
aliases = ["FF30 support", "FF30 end support", "FF30 ball screw support", "FF30 support unit"]
standard = "TBI"

[[presets]]
id = "BK12-simple"
title = "BK12, simple"
params = { designation = "BK12", detail = "simple" }
aliases = ["BK12 simple"]
standard = "TBI"

Use this part

STEVE

Open in STEVE

Open it in STEVE The STEVE runtime runs in STEVE: open the part there, or download the code and bundle.

Get the code

curl -o part.py "https://pythonparts.org/p/steve/screw-end-support/v/1.0.0/raw/part.py"

Raw files, bundle and API

curl "https://pythonparts.org/api/v1/parts/steve/screw-end-support/1.0.0"

The version's JSON (parameters, presets, files); add /build?name=value for a build at other values.

About this part

steve93 parts

Profile

Steel (generic)Carbon & alloy steels · Custom finish · 7.9 g/cm³

Mass: 368 g

At the parameters shown in the viewer.

License: MIT

Permissive: use, change and sell it; keep the copyright notice.

Runtime: STEVE
Requirements: None stated in the code
Built with: CadQuery 2.9.0.dev0
Published: Nov 5, 2026
Downloads: 0
Builds: 0
Stars: 0
Bundle: 1d07561d8553…

#ball-screw #end-support #bk #bf #fk #ff #motion #metric

Checks

PassedImports: cadquery, math, steve

Every published part passes our checks before it’s listed. It is still code: read it before you use it.

Request a removal A copyright notice, or a trademark, confidential design, safety, malicious code or other problem. Report an illegal or prohibited item

Ball screw end support unit as one solid: BK fixed and BF support side rectangular, FK fixed and FF support side round. Outer dimensions, bore and holes from TBI's sheets. See the README.

Ball screw end support

A ball screw end support unit as one solid; the bearings aren't modelled. BK and BF stand with their foot on the XY plane and the screw along Y at height h. FK and FF have their flange face on the XY plane and the screw along Z.

Source

TBI Ball Screw Support Units, Anaheim Automation sheets:

Bore, outer sizes, centre height, hole sizes, pitch P and PCD are the sheets'. The sheets state b and h as +/-0.02.

Proportions, for looks only: the shaft-end collar's diameter, the height of the BK and BF wing holes (the sheet gives E between them, not where they sit), and where the block's four counterbored holes sit. The FK and FF bolt circle is the sheet's, set on the diagonals as drawn. Overall length is L + L1 here; the sheet's reference L2 is not modelled.

The bore follows the sheet: BF10 has an 8 mm bore and BK10 a 10 mm bore, since the support side takes a smaller shaft end. BK8, BF8, FF8, FK17 and FF17 aren't in these tables, so they aren't offered.

1.0.0 Latest Nov 5, 2026 · 1 hour ago

More #ball-screw

STEVEMIT

steve/miniature-linear-guide

HIWIN MGN miniature linear guideway, sizes 7, 9, 12 and 15: rail (MGNR) or block (MGN-C / MGN-H).

1 11 sizes 0 1 hour ago v1.1.1

STEVEMIT

steve/lead-screw

Trapezoidal lead screw with a real thread: Tr8, Tr10, Tr12 and Tr16, leads 2 to 8 mm, any length.

1 85 sizes 0 1 hour ago v1.1.1

STEVEMIT

steve/shaft-support

Shaft support: SK8 to SK40 upright and SHF10 to SHF40 flanged, for round linear shafts.

0 18 sizes 0 3 hours ago v1.0.0

STEVEMIT

steve/linear-bushing-block

Linear bushing block SC6UU to SC30UU (also sold as SCS8UU and so on), shafts 6 to 30 mm.

0 10 sizes 0 3 hours ago v1.0.0

steve/screw-end-support

Ball screw end support

Source

Ball screw end support

Source

Related parts

steve/miniature-linear-guide

steve/lead-screw

steve/shaft-support

steve/linear-bushing-block