STEVEMIT
steve/tht-led
Through-hole round LEDs from Vishay's drawings: 5 mm (T-1 3/4, TLHx5400) and 3 mm (T-1, TLHx4400), red, yellow or green.
steve/seven-segment-display
Kingbright through-hole 7-segment LED displays: CA56-12, CC56-12, DA56-11, DA04-11 and SBC18-11, by part number.
Isometric
Section analysis
Plane normal
Offset
| 1 | """Kingbright through-hole 7-segment LED numeric displays: the 0.56 inch four-digit CA56-12 and CC56-12, the 0.56 inch two-digit |
| 2 | DA56-11, the 0.4 inch two-digit DA04-11 and the 1.75 inch single-digit SBC18-11. The part number gives the package and the emitting |
| 3 | colour. The display lies on the board (the XY plane) on the rim of its back, centred on the origin, the digits along X and upright |
| 4 | along +Y, the face up (+Z) and the pins down through the board. The housing is one solid, each segment and decimal point its own solid |
| 5 | on the face, and each pin its own solid. Dimensions from Kingbright's data sheets; see the README.""" |
| 6 | import math |
| 7 | |
| 8 | from steve import Model |
| 9 | |
| 10 | part_number = "CA56-12EWA" # Kingbright part number |
| 11 | |
| 12 | # package: (length along X, height along Y, depth from the face to the rim of the back, rim depth, digits, digit pitch, digit height, |
| 13 | # digit width, segment width, slant (degrees), decimal point diameter, pins per row, row spacing, pin pitch, pin diameter, pin length |
| 14 | # below the rim), mm. Kingbright data sheets, "PACKAGE DIMENSIONS" (page 1); tolerance +/-0.25 unless noted: |
| 15 | # CA56-12, CC56-12: CA56-12EWA DSAP8253 V.1A 02/26/2020: 50.3 x 19, 8.1 deep, 4 digits at 12.7, digit 14.2 high and 8.0 wide, |
| 16 | # segment 1.5, 8 deg, DP 1.5, 12 pins in rows 15.24 apart at 2.54, pin 0.5 +0.25/-0.1, 4 +/-0.5 long. The rim depth isn't given. |
| 17 | # DA56-11: DA56-11SURKWA DSAM8343 V.3A 02/27/2020: 25 x 19.05, 8.0 deep and 6.8 to the back's recess (rim 1.2), 2 digits at 12.7, |
| 18 | # digit 14.22 high and 8 wide, segment 1.3, 8 deg, DP 1.68, 18 pins in rows 15.24 apart at 2.54, the end pins 2.34 from the ends. |
| 19 | # DA04-11: DA04-11SURKWA DSAM8338 V.4A 02/27/2020: 20.2 x 16, 7 deep, 2 digits at 10.16, digit 10 high and 5.976 wide, segment |
| 20 | # 1.0, 8 deg, DP 1.3 at 3.4 from its digit's centre, 16 pins in rows 12.7 apart at 2.54, the end pins 1.21 from the ends. The rim |
| 21 | # depth isn't given. |
| 22 | # SBC18-11: SBC18-11SURKCGKWA DSAK2749 V.6A JUN/25/2016: 38 x 56, 11 deep and 10 to the back's recess (rim 1.0), 1 digit 44.5 high |
| 23 | # and 26.1 wide, segment 4.15, 10 deg, DP 4.5, 10 pins in rows 48.26 apart at 2.54, the end pins 13.92 from the ends, the rim's |
| 24 | # ends 3 wide. |
| 25 | PACKAGES = { |
| 26 | "CA56-12": (50.3, 19.0, 8.1, 1.75, 4, 12.7, 14.2, 8.0, 1.5, 8.0, 1.5, 6, 15.24, 2.54, 0.5, 4.0), |
| 27 | "DA56-11": (25.0, 19.05, 8.0, 1.2, 2, 12.7, 14.22, 8.0, 1.3, 8.0, 1.68, 9, 15.24, 2.54, 0.5, 4.0), |
| 28 | "DA04-11": (20.2, 16.0, 7.0, 1.2, 2, 10.16, 10.0, 5.976, 1.0, 8.0, 1.3, 8, 12.7, 2.54, 0.5, 4.0), |
| 29 | "SBC18-11": (38.0, 56.0, 11.0, 1.0, 1, 0.0, 44.5, 26.1, 4.15, 10.0, 4.5, 5, 48.26, 2.54, 0.5, 4.0), |
| 30 | } |
| 31 | # Part number: (package, emitting colour, data sheet), from each part's own Kingbright data sheet (README). CC56-12 is the common |
| 32 | # cathode CA56-12 in the same package. |
| 33 | PARTS = { |
| 34 | "CA56-12CGKWA": ("CA56-12", "green", "DSAD2557 V.10A 10/16/2017"), |
| 35 | "CA56-12EWA": ("CA56-12", "high efficiency red", "DSAP8253 V.1A 02/26/2020"), |
| 36 | "CA56-12SEKWA": ("CA56-12", "super bright orange", "DSAK2823 V.8A 03/26/2018"), |
| 37 | "CA56-12SRWA": ("CA56-12", "super bright red", "DSAP8254 V.1A 02/26/2020"), |
| 38 | "CA56-12SURKWA": ("CA56-12", "hyper red", "DSAK2828 V.9A 03/26/2018"), |
| 39 | "CA56-12SYKWA": ("CA56-12", "super bright yellow", "DSAK2832 V.7A 03/26/2018"), |
| 40 | "CC56-12GWA": ("CA56-12", "green", "DSAP4627 V.2A 02/26/2020"), |
| 41 | "CC56-12YWA": ("CA56-12", "yellow", "DSAD2374 V.7 MAR/28/2011"), |
| 42 | "DA04-11CGKWA": ("DA04-11", "green", "DSAM8337 V.3A 02/27/2020"), |
| 43 | "DA04-11SEKWA": ("DA04-11", "super bright orange", "DSAG8078 V.11A 04/26/2019"), |
| 44 | "DA04-11SURKWA": ("DA04-11", "hyper red", "DSAM8338 V.4A 02/27/2020"), |
| 45 | "DA04-11SYKWA": ("DA04-11", "super bright yellow", "DSAM8339 V.3A 02/27/2020"), |
| 46 | "DA56-11CGKWA": ("DA56-11", "green", "DSAM8549 V.3A 02/27/2020"), |
| 47 | "DA56-11SEKWA": ("DA56-11", "super bright orange", "DSAC9421 V.10A 03/15/2018"), |
| 48 | "DA56-11SURKWA": ("DA56-11", "hyper red", "DSAM8343 V.3A 02/27/2020"), |
| 49 | "DA56-11SYKWA": ("DA56-11", "super bright yellow", "DSAM8550 V.3A 02/27/2020"), |
| 50 | "SBC18-11SURKCGKWA": ("SBC18-11", "hyper red and green", "DSAK2749 V.6A JUN/25/2016"), |
| 51 | } |
| 52 | # Proportions, for looks (the drawings show these but don't dimension them; README): the back is a rim around a shallow recess the pins |
| 53 | # leave from; the rim's flat is 0.8 wide on the long sides and at the ends (CA56-12's ends 1.3, SBC18-11's 3, dimensioned), and its inner |
| 54 | # wall slopes in over another 0.8. The rim depths of CA56-12 (1.75) and DA04-11 (1.2) are measured off their side views. The digits and |
| 55 | # the pin rows are centred on the body; segments have a gap of a quarter of their width at each joint; a digit's decimal point sits at |
| 56 | # its foot, its centre 0.569 x the digit width right of the digit's centre (DA04-11's dimensioned 3.4 / 5.976). CA56-12's colon dots |
| 57 | # (DP5, DP6) are the decimal point's size, midway between digits 2 and 3, at 0.79 and 0.46 of the digit height. |
| 58 | RIM = {"CA56-12": (1.3, 0.8, 0.8), "DA56-11": (0.8, 0.8, 0.8), "DA04-11": (0.8, 0.8, 0.8), "SBC18-11": (3.0, 0.8, 0.8)} |
| 59 | DP_OFFSET = 0.569 |
| 60 | COLON = (0.79, 0.46) |
| 61 | PROUD = 0.03 # segments stand this far proud of the face so the renderer draws their edges |
| 62 | SEGMENT_COLOURS = {"green": "#7fd36a", "high efficiency red": "#f05040", "super bright orange": "#ff9040", "super bright red": "#ff4038", |
| 63 | "hyper red": "#ff3a3a", "super bright yellow": "#ffd640", "yellow": "#ffe060", "hyper red and green": "#ffb080"} |
| 64 | |
| 65 | if part_number not in PARTS: |
| 66 | raise ValueError(f"no part {part_number!r}: {', '.join(PARTS)}") |
| 67 | package, emitting, _sheet = PARTS[part_number] |
| 68 | L, Hb, D, rim, digits, pitch, H, W, t, slant, dp_d, per_row, rows, pin_pitch, pin_d, pin_len = PACKAGES[package] |
| 69 | end_flat, side_flat, slope = RIM[package] |
| 70 | shear = math.tan(math.radians(slant)) |
| 71 | |
| 72 | model = Model() |
| 73 | # Housing: a block from the rim (z = 0) to the face (z = D), with the recess in its back cut as a ruled loft. |
| 74 | model.box("housing", L, Hb, D, at=(0, 0, D / 2), op="new", body="housing_body", name="Housing") |
| 75 | with model.sketch("recess_open", on="XY", name="Recess") as sk: |
| 76 | sk.rect("recess_open_rect", (-L / 2 + end_flat, -Hb / 2 + side_flat), (L / 2 - end_flat, Hb / 2 - side_flat)) |
| 77 | model.plane("recess_plane", on="XY", offset=rim, name="Recess") |
| 78 | with model.sketch("recess_floor", on="recess_plane", name="Recess") as sk: |
| 79 | sk.rect("recess_floor_rect", (-L / 2 + end_flat + slope, -Hb / 2 + side_flat + slope), |
| 80 | (L / 2 - end_flat - slope, Hb / 2 - side_flat - slope)) |
| 81 | model.loft("recess", ["recess_open", "recess_floor"], ruled=True, op="cut", body="housing_body", name="Recess") |
| 82 | |
| 83 | |
| 84 | def sheared(points, cx, y0): |
| 85 | """Digit-local points (x across, y up from the digit's foot) on the face, slanted about the digit's mid-height.""" |
| 86 | return [(cx + x + (y - H / 2) * shear, y0 + y) for x, y in points] |
| 87 | |
| 88 | |
| 89 | def horizontal(y, g): |
| 90 | x1, x2 = -W / 2 + t / 2 + g, W / 2 - t / 2 - g |
| 91 | return [(x1, y), (x1 + t / 2, y + t / 2), (x2 - t / 2, y + t / 2), (x2, y), (x2 - t / 2, y - t / 2), (x1 + t / 2, y - t / 2)] |
| 92 | |
| 93 | |
| 94 | def vertical(x, y1, y2): |
| 95 | return [(x, y1), (x + t / 2, y1 + t / 2), (x + t / 2, y2 - t / 2), (x, y2), (x - t / 2, y2 - t / 2), (x - t / 2, y1 + t / 2)] |
| 96 | |
| 97 | |
| 98 | # Segments a to g and the decimal point of each digit, each its own solid, on a plane at the face. |
| 99 | g = t / 4 |
| 100 | y0 = -H / 2 |
| 101 | xv = W / 2 - t / 2 |
| 102 | segments = { |
| 103 | "a": horizontal(H - t / 2, g), "g": horizontal(H / 2, g), "d": horizontal(t / 2, g), |
| 104 | "f": vertical(-xv, H / 2 + g, H - t / 2 - g), "b": vertical(xv, H / 2 + g, H - t / 2 - g), |
| 105 | "e": vertical(-xv, t / 2 + g, H / 2 - g), "c": vertical(xv, t / 2 + g, H / 2 - g), |
| 106 | } |
| 107 | model.plane("face_plane", on="XY", offset=D, name="Face") |
| 108 | lit = [] |
| 109 | for i in range(digits): |
| 110 | cx = (i - (digits - 1) / 2) * pitch |
| 111 | for s, points in segments.items(): |
| 112 | with model.sketch(f"seg{i + 1}{s}_sketch", on="face_plane", name=f"Digit {i + 1} segment {s}") as sk: |
| 113 | sk.polyline(f"seg{i + 1}{s}_outline", sheared(points, cx, y0), closed=True) |
| 114 | model.extrude(f"seg{i + 1}{s}", f"seg{i + 1}{s}_sketch", distance=PROUD, op="new", body=f"seg{i + 1}{s}_body", |
| 115 | name=f"Digit {i + 1} segment {s}") |
| 116 | lit.append(f"seg{i + 1}{s}_body") |
| 117 | dots = [(cx + DP_OFFSET * W, y0 + dp_d / 2)] |
| 118 | if package == "CA56-12" and i == 1: |
| 119 | dots += [(cx + pitch / 2 + (f - 0.5) * H * shear, y0 + f * H) for f in COLON] |
| 120 | for k, (x, y) in enumerate(dots): |
| 121 | with model.sketch(f"dp{i + 1}_{k}_sketch", on="face_plane", name=f"Digit {i + 1} dot") as sk: |
| 122 | sk.circle(f"dp{i + 1}_{k}_circle", (x, y), dp_d / 2) |
| 123 | model.extrude(f"dp{i + 1}_{k}", f"dp{i + 1}_{k}_sketch", distance=PROUD, op="new", body=f"dp{i + 1}_{k}_body", |
| 124 | name=f"Digit {i + 1} dot") |
| 125 | lit.append(f"dp{i + 1}_{k}_body") |
| 126 | |
| 127 | # Pins: round, from the recess floor down to their length below the rim, two rows of per_row, each its own solid. |
| 128 | model.plane("pin_plane", on="XY", offset=-pin_len, name="Pins") |
| 129 | pins = [] |
| 130 | for r, y in enumerate((-rows / 2, rows / 2)): |
| 131 | for j in range(per_row): |
| 132 | x = (j - (per_row - 1) / 2) * pin_pitch |
| 133 | with model.sketch(f"pin{r}_{j}_sketch", on="pin_plane", name="Pin") as sk: |
| 134 | sk.circle(f"pin{r}_{j}_circle", (x, y), pin_d / 2) |
| 135 | model.extrude(f"pin{r}_{j}", f"pin{r}_{j}_sketch", distance=pin_len + rim, op="new", body=f"pin{r}_{j}_body", name="Pin") |
| 136 | pins.append(f"pin{r}_{j}_body") |
| 137 | # Materials (the sheets name no materials and give no weight): the housing plastic shown as pc, grey face; the segments are the |
| 138 | # epoxy-filled diffusers ("Do not apply stress to the epoxy resin", page 4), shown as pmma (1.18, epoxy about 1.2), white diffused and |
| 139 | # tinted with the emitting colour; the pins are metal (the sheets don't say which), shown as copper. |
| 140 | model.material("pc", bodies=["housing_body"], color="#5b5d60") |
| 141 | model.material("pmma", bodies=lit, color=SEGMENT_COLOURS[emitting]) |
| 142 | model.material("copper", bodies=pins, color="#c9ccd1") |
| 143 | result = model.result() |
| 144 |
| 1 | name = "steve/seven-segment-display" |
| 2 | version = "1.0.0" |
| 3 | runtime = "steve" |
| 4 | license = "MIT" |
| 5 | summary = "Kingbright through-hole 7-segment LED displays: CA56-12, CC56-12, DA56-11, DA04-11 and SBC18-11, by part number." |
| 6 | description = """Through-hole 7-segment LED numeric displays for board layouts and enclosures, as Kingbright draws them: the 0.56 inch four-digit CA56-12 and CC56-12, the 0.56 inch two-digit DA56-11, the 0.4 inch two-digit DA04-11 and the 1.75 inch single-digit SBC18-11. The part number gives the package and the emitting colour. The housing, each segment and dot, and each pin are their own solids. Dimensions from each part's Kingbright data sheet. See the README.""" |
| 7 | tags = ["display", "7-segment", "led", "through-hole", "kingbright", "electronics"] |
| 8 | |
| 9 | [parameters.part_number] |
| 10 | type = "choice" |
| 11 | default = "CA56-12EWA" |
| 12 | choices = ["CA56-12CGKWA", "CA56-12EWA", "CA56-12SEKWA", "CA56-12SRWA", "CA56-12SURKWA", "CA56-12SYKWA", "CC56-12GWA", "CC56-12YWA", "DA04-11CGKWA", "DA04-11SEKWA", "DA04-11SURKWA", "DA04-11SYKWA", "DA56-11CGKWA", "DA56-11SEKWA", "DA56-11SURKWA", "DA56-11SYKWA", "SBC18-11SURKCGKWA"] |
| 13 | label = "Part number" |
| 14 | description = "Kingbright part number: CA56-12/CC56-12 50.3 x 19 four-digit, DA56-11 25 x 19.05 two-digit, DA04-11 20.2 x 16 two-digit, SBC18-11 38 x 56 single-digit." |
| 15 | |
| 16 | [[presets]] |
| 17 | id = "CA56-12CGKWA" |
| 18 | title = "Kingbright CA56-12CGKWA, 0.56 inch four-digit, common anode 7-segment LED display, green" |
| 19 | params = { part_number = "CA56-12CGKWA" } |
| 20 | aliases = ["CA56-12CGKWA.", "CA56-12CGKWA", "Kingbright CA56-12CGKWA", "CA56-12 green 7-segment display"] |
| 21 | standard = "Kingbright CA56-12CGKWA" |
| 22 | |
| 23 | [[presets]] |
| 24 | id = "CA56-12EWA" |
| 25 | title = "Kingbright CA56-12EWA, 0.56 inch four-digit, common anode 7-segment LED display, high efficiency red" |
| 26 | params = { part_number = "CA56-12EWA" } |
| 27 | aliases = ["CA56-12EWA.", "CA56-12EWA", "Kingbright CA56-12EWA", "CA56-12 high efficiency red 7-segment display"] |
| 28 | standard = "Kingbright CA56-12EWA" |
| 29 | |
| 30 | [[presets]] |
| 31 | id = "CA56-12SEKWA" |
| 32 | title = "Kingbright CA56-12SEKWA, 0.56 inch four-digit, common anode 7-segment LED display, super bright orange" |
| 33 | params = { part_number = "CA56-12SEKWA" } |
| 34 | aliases = ["CA56-12SEKWA.", "CA56-12SEKWA", "Kingbright CA56-12SEKWA", "CA56-12 super bright orange 7-segment display"] |
| 35 | standard = "Kingbright CA56-12SEKWA" |
| 36 | |
| 37 | [[presets]] |
| 38 | id = "CA56-12SRWA" |
| 39 | title = "Kingbright CA56-12SRWA, 0.56 inch four-digit, common anode 7-segment LED display, super bright red" |
| 40 | params = { part_number = "CA56-12SRWA" } |
| 41 | aliases = ["CA56-12SRWA.", "CA56-12SRWA", "Kingbright CA56-12SRWA", "CA56-12 super bright red 7-segment display"] |
| 42 | standard = "Kingbright CA56-12SRWA" |
| 43 | |
| 44 | [[presets]] |
| 45 | id = "CA56-12SURKWA" |
| 46 | title = "Kingbright CA56-12SURKWA, 0.56 inch four-digit, common anode 7-segment LED display, hyper red" |
| 47 | params = { part_number = "CA56-12SURKWA" } |
| 48 | aliases = ["CA56-12SURKWA.", "CA56-12SURKWA", "Kingbright CA56-12SURKWA", "CA56-12 hyper red 7-segment display"] |
| 49 | standard = "Kingbright CA56-12SURKWA" |
| 50 | |
| 51 | [[presets]] |
| 52 | id = "CA56-12SYKWA" |
| 53 | title = "Kingbright CA56-12SYKWA, 0.56 inch four-digit, common anode 7-segment LED display, super bright yellow" |
| 54 | params = { part_number = "CA56-12SYKWA" } |
| 55 | aliases = ["CA56-12SYKWA.", "CA56-12SYKWA", "Kingbright CA56-12SYKWA", "CA56-12 super bright yellow 7-segment display"] |
| 56 | standard = "Kingbright CA56-12SYKWA" |
| 57 | |
| 58 | [[presets]] |
| 59 | id = "CC56-12GWA" |
| 60 | title = "Kingbright CC56-12GWA, 0.56 inch four-digit, common cathode 7-segment LED display, green" |
| 61 | params = { part_number = "CC56-12GWA" } |
| 62 | aliases = ["CC56-12GWA.", "CC56-12GWA", "Kingbright CC56-12GWA", "CC56-12 green 7-segment display"] |
| 63 | standard = "Kingbright CC56-12GWA" |
| 64 | |
| 65 | [[presets]] |
| 66 | id = "CC56-12YWA" |
| 67 | title = "Kingbright CC56-12YWA, 0.56 inch four-digit, common cathode 7-segment LED display, yellow" |
| 68 | params = { part_number = "CC56-12YWA" } |
| 69 | aliases = ["CC56-12YWA.", "CC56-12YWA", "Kingbright CC56-12YWA", "CC56-12 yellow 7-segment display"] |
| 70 | standard = "Kingbright CC56-12YWA" |
| 71 | |
| 72 | [[presets]] |
| 73 | id = "DA04-11CGKWA" |
| 74 | title = "Kingbright DA04-11CGKWA, 0.4 inch two-digit, common anode 7-segment LED display, green" |
| 75 | params = { part_number = "DA04-11CGKWA" } |
| 76 | aliases = ["DA04-11CGKWA.", "DA04-11CGKWA", "Kingbright DA04-11CGKWA", "DA04-11 green 7-segment display"] |
| 77 | standard = "Kingbright DA04-11CGKWA" |
| 78 | |
| 79 | [[presets]] |
| 80 | id = "DA04-11SEKWA" |
| 81 | title = "Kingbright DA04-11SEKWA, 0.4 inch two-digit, common anode 7-segment LED display, super bright orange" |
| 82 | params = { part_number = "DA04-11SEKWA" } |
| 83 | aliases = ["DA04-11SEKWA.", "DA04-11SEKWA", "Kingbright DA04-11SEKWA", "DA04-11 super bright orange 7-segment display"] |
| 84 | standard = "Kingbright DA04-11SEKWA" |
| 85 | |
| 86 | [[presets]] |
| 87 | id = "DA04-11SURKWA" |
| 88 | title = "Kingbright DA04-11SURKWA, 0.4 inch two-digit, common anode 7-segment LED display, hyper red" |
| 89 | params = { part_number = "DA04-11SURKWA" } |
| 90 | aliases = ["DA04-11SURKWA.", "DA04-11SURKWA", "Kingbright DA04-11SURKWA", "DA04-11 hyper red 7-segment display"] |
| 91 | standard = "Kingbright DA04-11SURKWA" |
| 92 | |
| 93 | [[presets]] |
| 94 | id = "DA04-11SYKWA" |
| 95 | title = "Kingbright DA04-11SYKWA, 0.4 inch two-digit, common anode 7-segment LED display, super bright yellow" |
| 96 | params = { part_number = "DA04-11SYKWA" } |
| 97 | aliases = ["DA04-11SYKWA.", "DA04-11SYKWA", "Kingbright DA04-11SYKWA", "DA04-11 super bright yellow 7-segment display"] |
| 98 | standard = "Kingbright DA04-11SYKWA" |
| 99 | |
| 100 | [[presets]] |
| 101 | id = "DA56-11CGKWA" |
| 102 | title = "Kingbright DA56-11CGKWA, 0.56 inch two-digit, common anode 7-segment LED display, green" |
| 103 | params = { part_number = "DA56-11CGKWA" } |
| 104 | aliases = ["DA56-11CGKWA.", "DA56-11CGKWA", "Kingbright DA56-11CGKWA", "DA56-11 green 7-segment display"] |
| 105 | standard = "Kingbright DA56-11CGKWA" |
| 106 | |
| 107 | [[presets]] |
| 108 | id = "DA56-11SEKWA" |
| 109 | title = "Kingbright DA56-11SEKWA, 0.56 inch two-digit, common anode 7-segment LED display, super bright orange" |
| 110 | params = { part_number = "DA56-11SEKWA" } |
| 111 | aliases = ["DA56-11SEKWA.", "DA56-11SEKWA", "Kingbright DA56-11SEKWA", "DA56-11 super bright orange 7-segment display"] |
| 112 | standard = "Kingbright DA56-11SEKWA" |
| 113 | |
| 114 | [[presets]] |
| 115 | id = "DA56-11SURKWA" |
| 116 | title = "Kingbright DA56-11SURKWA, 0.56 inch two-digit, common anode 7-segment LED display, hyper red" |
| 117 | params = { part_number = "DA56-11SURKWA" } |
| 118 | aliases = ["DA56-11SURKWA.", "DA56-11SURKWA", "Kingbright DA56-11SURKWA", "DA56-11 hyper red 7-segment display"] |
| 119 | standard = "Kingbright DA56-11SURKWA" |
| 120 | |
| 121 | [[presets]] |
| 122 | id = "DA56-11SYKWA" |
| 123 | title = "Kingbright DA56-11SYKWA, 0.56 inch two-digit, common anode 7-segment LED display, super bright yellow" |
| 124 | params = { part_number = "DA56-11SYKWA" } |
| 125 | aliases = ["DA56-11SYKWA.", "DA56-11SYKWA", "Kingbright DA56-11SYKWA", "DA56-11 super bright yellow 7-segment display"] |
| 126 | standard = "Kingbright DA56-11SYKWA" |
| 127 | |
| 128 | [[presets]] |
| 129 | id = "SBC18-11SURKCGKWA" |
| 130 | title = "Kingbright SBC18-11SURKCGKWA, 1.75 inch single-digit, bi-colour 7-segment LED display, hyper red and green" |
| 131 | params = { part_number = "SBC18-11SURKCGKWA" } |
| 132 | aliases = ["SBC18-11SURKCGKWA.", "SBC18-11SURKCGKWA", "Kingbright SBC18-11SURKCGKWA", "SBC18-1 hyper red and green 7-segment display"] |
| 133 | standard = "Kingbright SBC18-11SURKCGKWA" |
| 134 |
Seven-segment display
Kingbright's through-hole 7-segment LED numeric displays, chosen by part number. The part number gives the package and the emitting colour. The display lies on the board (the XY plane) on the rim of its back, centred on the origin. The digits run along X, upright along +Y, with the face up (+Z) and the pins down through the board. The housing is one solid. Each segment and dot is its own solid on the face, standing 0.03 proud so its edges show. Each pin is its own solid.
| Package | Digits | Size (length x height x depth) | Part numbers |
|---|---|---|---|
| CA56-12, CC56-12 | four 0.56 inch (14.2) | 50.3 x 19 x 8.1 | CA56-12CGKWA, CA56-12EWA, CA56-12SEKWA, CA56-12SRWA, CA56-12SURKWA, CA56-12SYKWA, CC56-12GWA, CC56-12YWA |
| DA56-11 | two 0.56 inch (14.22) | 25 x 19.05 x 8.0 | DA56-11CGKWA, DA56-11SEKWA, DA56-11SURKWA, DA56-11SYKWA |
| DA04-11 | two 0.4 inch (10) | 20.2 x 16 x 7 | DA04-11CGKWA, DA04-11SEKWA, DA04-11SURKWA, DA04-11SYKWA |
| SBC18-11 | one 1.75 inch (44.5), bi-colour | 38 x 56 x 11 | SBC18-11SURKCGKWA |
CA56 is common anode and CC56 common cathode, in the same package.
Source
Kingbright data sheets, one for each part number, "PACKAGE DIMENSIONS" on page 1. All dimensions are in mm, with a tolerance of ±0.25 unless noted. Each sheet draws its own part. The sheets in one package draw the same outline, and the model was checked against every one.
| Part number | Spec no., revision, date | Copy |
|---|---|---|
| CA56-12CGKWA | DSAD2557, V.10A, 10/16/2017 | datasheet.octopart.com |
| CA56-12EWA | DSAP8253, V.1A, 02/26/2020 | kingbrightusa.com |
| CA56-12SEKWA | DSAK2823, V.8A, 03/26/2018 | datasheet.octopart.com |
| CA56-12SRWA | DSAP8254, V.1A, 02/26/2020 | kingbrightusa.com |
| CA56-12SURKWA | DSAK2828, V.9A, 03/26/2018 | datasheet.octopart.com |
| CA56-12SYKWA | DSAK2832, V.7A, 03/26/2018 | datasheet.octopart.com |
| CC56-12GWA | DSAP4627, V.2A, 02/26/2020 | kingbrightusa.com |
| CC56-12YWA | DSAD2374, V.7, MAR/28/2011 | kingbrightusa.com |
| DA04-11CGKWA | DSAM8337, V.3A, 02/27/2020 | kingbrightusa.com |
| DA04-11SEKWA | DSAG8078, V.11A, 04/26/2019 | datasheet.octopart.com |
| DA04-11SURKWA | DSAM8338, V.4A, 02/27/2020 | kingbrightusa.com |
| DA04-11SYKWA | DSAM8339, V.3A, 02/27/2020 | kingbrightusa.com |
| DA56-11CGKWA | DSAM8549, V.3A, 02/27/2020 | kingbrightusa.com |
| DA56-11SEKWA | DSAC9421, V.10A, 03/15/2018 | datasheet.octopart.com |
| DA56-11SURKWA | DSAM8343, V.3A, 02/27/2020 | kingbrightusa.com |
| DA56-11SYKWA | DSAM8550, V.3A, 02/27/2020 | kingbrightusa.com |
| SBC18-11SURKCGKWA | DSAK2749, V.6A, JUN/25/2016 | datasheet.octopart.com |
The kingbrightusa.com copies are at https://www.kingbrightusa.com/images/catalog/SPEC/<part number>.pdf. The others are Kingbright's own sheets as hosted by Octopart, for example https://datasheet.octopart.com/CA56-12SURKWA-Kingbright-datasheet-180518356.pdf.
| Package | Length | Height | Depth | Rim depth | Digit pitch | Digit height | Digit width | Segment width | Slant | Dot | Pins | Row spacing | End pin to end |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CA56-12 | 50.3 | 19 | 8.1 | not given | 12.7 | 14.2 | 8.0 | 1.5 | 8° | Ø 1.5 | 2 x 6 | 15.24 | not given |
| DA56-11 | 25 | 19.05 | 8.0 | 1.2 (8.0 - 6.8) | 12.7 | 14.22 | 8 | 1.3 | 8° | Ø 1.68 | 2 x 9 | 15.24 | 2.34 |
| DA04-11 | 20.2 | 16 | 7 | not given | 10.16 | 10 | 5.976 | 1.0 | 8° | Ø 1.3, 3.4 from the digit's centre | 2 x 8 | 12.7 | 1.21 |
| SBC18-11 | 38 | 56 | 11 | 1.0 (11 - 10) | 44.5 | 26.1 | 4.15 | 10° | Ø 4.5 | 2 x 5 | 48.26 | 13.92 |
Every package has round pins Ø 0.5 (+0.25/-0.1) at a 2.54 pitch, 4 ±0.5 long below the rim. Where the end pin's distance is given, the pin rows are centred on the body (2.34, 1.21 and 13.92 each make it so).
Proportions, stated plainly. The drawings show these but don't dimension them:
- The back is a rim around a shallow recess, and the pins leave from the recess. The rim's flat is 0.8 wide on the long sides and at the ends, except CA56-12's ends (1.3) and SBC18-11's ends (3, dimensioned). Its inner wall slopes in over another 0.8.
- The rim depths of CA56-12 (1.75) and DA04-11 (1.2) are measured off their side views against the drawn depth.
- The digits are centred on the body. CA56-12's pin rows are centred on the body, as drawn.
- Segments are six-sided bars with a gap of a quarter of their width at each joint. The digit width is measured across the outer edges at mid-height, and the digit slants about its mid-height.
- A digit's dot sits at its foot. Its centre is 0.569 times the digit width right of the digit's centre, which is DA04-11's dimensioned 3.4 divided by 5.976.
- CA56-12 draws two more dots, DP5 and DP6, as a colon between digits 2 and 3. They are the dot's size, midway between the digits, at 0.79 and 0.46 of the digit height.
Materials. The sheets name no materials and give no weight, so the mass isn't checked. The housing is shown as pc with a grey face. The segments are the epoxy-filled diffusers (the sheets warn against stressing "the epoxy resin"), shown as pmma (1.18; epoxy is about 1.2), white diffused and tinted with the emitting colour. The pins are metal, shown as copper.
Catalogue models
The old catalogue's 17 Kingbright entries have no reference models. Each names an exact Kingbright part number, and each maps to the preset of that number, from that part's own sheet.
The family's other entries name other makers' displays (HDSP, HDSM, LTS, MAN, DE, ELD and KCSC02 parts). They are left with their reasons in COVERAGE.md.
| 1 | # Seven-segment display |
| 2 | |
| 3 | Kingbright's through-hole 7-segment LED numeric displays, chosen by part number. The part number gives the package and the emitting colour. The display lies on the board (the XY plane) on the rim of its back, centred on the origin. The digits run along X, upright along +Y, with the face up (+Z) and the pins down through the board. The housing is one solid. Each segment and dot is its own solid on the face, standing 0.03 proud so its edges show. Each pin is its own solid. |
| 4 | |
| 5 | | Package | Digits | Size (length x height x depth) | Part numbers | |
| 6 | |---|---|---|---| |
| 7 | | CA56-12, CC56-12 | four 0.56 inch (14.2) | 50.3 x 19 x 8.1 | CA56-12CGKWA, CA56-12EWA, CA56-12SEKWA, CA56-12SRWA, CA56-12SURKWA, CA56-12SYKWA, CC56-12GWA, CC56-12YWA | |
| 8 | | DA56-11 | two 0.56 inch (14.22) | 25 x 19.05 x 8.0 | DA56-11CGKWA, DA56-11SEKWA, DA56-11SURKWA, DA56-11SYKWA | |
| 9 | | DA04-11 | two 0.4 inch (10) | 20.2 x 16 x 7 | DA04-11CGKWA, DA04-11SEKWA, DA04-11SURKWA, DA04-11SYKWA | |
| 10 | | SBC18-11 | one 1.75 inch (44.5), bi-colour | 38 x 56 x 11 | SBC18-11SURKCGKWA | |
| 11 | |
| 12 | CA56 is common anode and CC56 common cathode, in the same package. |
| 13 | |
| 14 | ## Source |
| 15 | |
| 16 | Kingbright data sheets, one for each part number, "PACKAGE DIMENSIONS" on page 1. All dimensions are in mm, with a tolerance of ±0.25 unless noted. Each sheet draws its own part. The sheets in one package draw the same outline, and the model was checked against every one. |
| 17 | |
| 18 | | Part number | Spec no., revision, date | Copy | |
| 19 | |---|---|---| |
| 20 | | CA56-12CGKWA | DSAD2557, V.10A, 10/16/2017 | datasheet.octopart.com | |
| 21 | | CA56-12EWA | DSAP8253, V.1A, 02/26/2020 | kingbrightusa.com | |
| 22 | | CA56-12SEKWA | DSAK2823, V.8A, 03/26/2018 | datasheet.octopart.com | |
| 23 | | CA56-12SRWA | DSAP8254, V.1A, 02/26/2020 | kingbrightusa.com | |
| 24 | | CA56-12SURKWA | DSAK2828, V.9A, 03/26/2018 | datasheet.octopart.com | |
| 25 | | CA56-12SYKWA | DSAK2832, V.7A, 03/26/2018 | datasheet.octopart.com | |
| 26 | | CC56-12GWA | DSAP4627, V.2A, 02/26/2020 | kingbrightusa.com | |
| 27 | | CC56-12YWA | DSAD2374, V.7, MAR/28/2011 | kingbrightusa.com | |
| 28 | | DA04-11CGKWA | DSAM8337, V.3A, 02/27/2020 | kingbrightusa.com | |
| 29 | | DA04-11SEKWA | DSAG8078, V.11A, 04/26/2019 | datasheet.octopart.com | |
| 30 | | DA04-11SURKWA | DSAM8338, V.4A, 02/27/2020 | kingbrightusa.com | |
| 31 | | DA04-11SYKWA | DSAM8339, V.3A, 02/27/2020 | kingbrightusa.com | |
| 32 | | DA56-11CGKWA | DSAM8549, V.3A, 02/27/2020 | kingbrightusa.com | |
| 33 | | DA56-11SEKWA | DSAC9421, V.10A, 03/15/2018 | datasheet.octopart.com | |
| 34 | | DA56-11SURKWA | DSAM8343, V.3A, 02/27/2020 | kingbrightusa.com | |
| 35 | | DA56-11SYKWA | DSAM8550, V.3A, 02/27/2020 | kingbrightusa.com | |
| 36 | | SBC18-11SURKCGKWA | DSAK2749, V.6A, JUN/25/2016 | datasheet.octopart.com | |
| 37 | |
| 38 | The kingbrightusa.com copies are at `https://www.kingbrightusa.com/images/catalog/SPEC/<part number>.pdf`. The others are Kingbright's own sheets as hosted by Octopart, for example `https://datasheet.octopart.com/CA56-12SURKWA-Kingbright-datasheet-180518356.pdf`. |
| 39 | |
| 40 | | Package | Length | Height | Depth | Rim depth | Digit pitch | Digit height | Digit width | Segment width | Slant | Dot | Pins | Row spacing | End pin to end | |
| 41 | |---|---|---|---|---|---|---|---|---|---|---|---|---|---| |
| 42 | | CA56-12 | 50.3 | 19 | 8.1 | not given | 12.7 | 14.2 | 8.0 | 1.5 | 8° | Ø 1.5 | 2 x 6 | 15.24 | not given | |
| 43 | | DA56-11 | 25 | 19.05 | 8.0 | 1.2 (8.0 - 6.8) | 12.7 | 14.22 | 8 | 1.3 | 8° | Ø 1.68 | 2 x 9 | 15.24 | 2.34 | |
| 44 | | DA04-11 | 20.2 | 16 | 7 | not given | 10.16 | 10 | 5.976 | 1.0 | 8° | Ø 1.3, 3.4 from the digit's centre | 2 x 8 | 12.7 | 1.21 | |
| 45 | | SBC18-11 | 38 | 56 | 11 | 1.0 (11 - 10) | | 44.5 | 26.1 | 4.15 | 10° | Ø 4.5 | 2 x 5 | 48.26 | 13.92 | |
| 46 | |
| 47 | Every package has round pins Ø 0.5 (+0.25/-0.1) at a 2.54 pitch, 4 ±0.5 long below the rim. Where the end pin's distance is given, the pin rows are centred on the body (2.34, 1.21 and 13.92 each make it so). |
| 48 | |
| 49 | **Proportions, stated plainly.** The drawings show these but don't dimension them: |
| 50 | |
| 51 | - The back is a rim around a shallow recess, and the pins leave from the recess. The rim's flat is 0.8 wide on the long sides and at the ends, except CA56-12's ends (1.3) and SBC18-11's ends (3, dimensioned). Its inner wall slopes in over another 0.8. |
| 52 | - The rim depths of CA56-12 (1.75) and DA04-11 (1.2) are measured off their side views against the drawn depth. |
| 53 | - The digits are centred on the body. CA56-12's pin rows are centred on the body, as drawn. |
| 54 | - Segments are six-sided bars with a gap of a quarter of their width at each joint. The digit width is measured across the outer edges at mid-height, and the digit slants about its mid-height. |
| 55 | - A digit's dot sits at its foot. Its centre is 0.569 times the digit width right of the digit's centre, which is DA04-11's dimensioned 3.4 divided by 5.976. |
| 56 | - CA56-12 draws two more dots, DP5 and DP6, as a colon between digits 2 and 3. They are the dot's size, midway between the digits, at 0.79 and 0.46 of the digit height. |
| 57 | |
| 58 | **Materials.** The sheets name no materials and give no weight, so the mass isn't checked. The housing is shown as pc with a grey face. The segments are the epoxy-filled diffusers (the sheets warn against stressing "the epoxy resin"), shown as pmma (1.18; epoxy is about 1.2), white diffused and tinted with the emitting colour. The pins are metal, shown as copper. |
| 59 | |
| 60 | ## Catalogue models |
| 61 | |
| 62 | The old catalogue's 17 Kingbright entries have no reference models. Each names an exact Kingbright part number, and each maps to the preset of that number, from that part's own sheet. |
| 63 | |
| 64 | The family's other entries name other makers' displays (HDSP, HDSM, LTS, MAN, DE, ELD and KCSC02 parts). They are left with their reasons in `COVERAGE.md`. |
| 65 |
Through-hole 7-segment LED numeric displays for board layouts and enclosures, as Kingbright draws them: the 0.56 inch four-digit CA56-12 and CC56-12, the 0.56 inch two-digit DA56-11, the 0.4 inch two-digit DA04-11 and the 1.75 inch single-digit SBC18-11. The part number gives the package and the emitting colour. The housing, each segment and dot, and each pin are their own solids. Dimensions from each part's Kingbright data sheet. See the README.
Seven-segment display
Kingbright's through-hole 7-segment LED numeric displays, chosen by part number. The part number gives the package and the emitting colour. The display lies on the board (the XY plane) on the rim of its back, centred on the origin. The digits run along X, upright along +Y, with the face up (+Z) and the pins down through the board. The housing is one solid. Each segment and dot is its own solid on the face, standing 0.03 proud so its edges show. Each pin is its own solid.
| Package | Digits | Size (length x height x depth) | Part numbers |
|---|---|---|---|
| CA56-12, CC56-12 | four 0.56 inch (14.2) | 50.3 x 19 x 8.1 | CA56-12CGKWA, CA56-12EWA, CA56-12SEKWA, CA56-12SRWA, CA56-12SURKWA, CA56-12SYKWA, CC56-12GWA, CC56-12YWA |
| DA56-11 | two 0.56 inch (14.22) | 25 x 19.05 x 8.0 | DA56-11CGKWA, DA56-11SEKWA, DA56-11SURKWA, DA56-11SYKWA |
| DA04-11 | two 0.4 inch (10) | 20.2 x 16 x 7 | DA04-11CGKWA, DA04-11SEKWA, DA04-11SURKWA, DA04-11SYKWA |
| SBC18-11 | one 1.75 inch (44.5), bi-colour | 38 x 56 x 11 | SBC18-11SURKCGKWA |
CA56 is common anode and CC56 common cathode, in the same package.
Source
Kingbright data sheets, one for each part number, "PACKAGE DIMENSIONS" on page 1. All dimensions are in mm, with a tolerance of ±0.25 unless noted. Each sheet draws its own part. The sheets in one package draw the same outline, and the model was checked against every one.
| Part number | Spec no., revision, date | Copy |
|---|---|---|
| CA56-12CGKWA | DSAD2557, V.10A, 10/16/2017 | datasheet.octopart.com |
| CA56-12EWA | DSAP8253, V.1A, 02/26/2020 | kingbrightusa.com |
| CA56-12SEKWA | DSAK2823, V.8A, 03/26/2018 | datasheet.octopart.com |
| CA56-12SRWA | DSAP8254, V.1A, 02/26/2020 | kingbrightusa.com |
| CA56-12SURKWA | DSAK2828, V.9A, 03/26/2018 | datasheet.octopart.com |
| CA56-12SYKWA | DSAK2832, V.7A, 03/26/2018 | datasheet.octopart.com |
| CC56-12GWA | DSAP4627, V.2A, 02/26/2020 | kingbrightusa.com |
| CC56-12YWA | DSAD2374, V.7, MAR/28/2011 | kingbrightusa.com |
| DA04-11CGKWA | DSAM8337, V.3A, 02/27/2020 | kingbrightusa.com |
| DA04-11SEKWA | DSAG8078, V.11A, 04/26/2019 | datasheet.octopart.com |
| DA04-11SURKWA | DSAM8338, V.4A, 02/27/2020 | kingbrightusa.com |
| DA04-11SYKWA | DSAM8339, V.3A, 02/27/2020 | kingbrightusa.com |
| DA56-11CGKWA | DSAM8549, V.3A, 02/27/2020 | kingbrightusa.com |
| DA56-11SEKWA | DSAC9421, V.10A, 03/15/2018 | datasheet.octopart.com |
| DA56-11SURKWA | DSAM8343, V.3A, 02/27/2020 | kingbrightusa.com |
| DA56-11SYKWA | DSAM8550, V.3A, 02/27/2020 | kingbrightusa.com |
| SBC18-11SURKCGKWA | DSAK2749, V.6A, JUN/25/2016 | datasheet.octopart.com |
The kingbrightusa.com copies are at https://www.kingbrightusa.com/images/catalog/SPEC/<part number>.pdf. The others are Kingbright's own sheets as hosted by Octopart, for example https://datasheet.octopart.com/CA56-12SURKWA-Kingbright-datasheet-180518356.pdf.
| Package | Length | Height | Depth | Rim depth | Digit pitch | Digit height | Digit width | Segment width | Slant | Dot | Pins | Row spacing | End pin to end |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CA56-12 | 50.3 | 19 | 8.1 | not given | 12.7 | 14.2 | 8.0 | 1.5 | 8° | Ø 1.5 | 2 x 6 | 15.24 | not given |
| DA56-11 | 25 | 19.05 | 8.0 | 1.2 (8.0 - 6.8) | 12.7 | 14.22 | 8 | 1.3 | 8° | Ø 1.68 | 2 x 9 | 15.24 | 2.34 |
| DA04-11 | 20.2 | 16 | 7 | not given | 10.16 | 10 | 5.976 | 1.0 | 8° | Ø 1.3, 3.4 from the digit's centre | 2 x 8 | 12.7 | 1.21 |
| SBC18-11 | 38 | 56 | 11 | 1.0 (11 - 10) | 44.5 | 26.1 | 4.15 | 10° | Ø 4.5 | 2 x 5 | 48.26 | 13.92 |
Every package has round pins Ø 0.5 (+0.25/-0.1) at a 2.54 pitch, 4 ±0.5 long below the rim. Where the end pin's distance is given, the pin rows are centred on the body (2.34, 1.21 and 13.92 each make it so).
Proportions, stated plainly. The drawings show these but don't dimension them:
- The back is a rim around a shallow recess, and the pins leave from the recess. The rim's flat is 0.8 wide on the long sides and at the ends, except CA56-12's ends (1.3) and SBC18-11's ends (3, dimensioned). Its inner wall slopes in over another 0.8.
- The rim depths of CA56-12 (1.75) and DA04-11 (1.2) are measured off their side views against the drawn depth.
- The digits are centred on the body. CA56-12's pin rows are centred on the body, as drawn.
- Segments are six-sided bars with a gap of a quarter of their width at each joint. The digit width is measured across the outer edges at mid-height, and the digit slants about its mid-height.
- A digit's dot sits at its foot. Its centre is 0.569 times the digit width right of the digit's centre, which is DA04-11's dimensioned 3.4 divided by 5.976.
- CA56-12 draws two more dots, DP5 and DP6, as a colon between digits 2 and 3. They are the dot's size, midway between the digits, at 0.79 and 0.46 of the digit height.
Materials. The sheets name no materials and give no weight, so the mass isn't checked. The housing is shown as pc with a grey face. The segments are the epoxy-filled diffusers (the sheets warn against stressing "the epoxy resin"), shown as pmma (1.18; epoxy is about 1.2), white diffused and tinted with the emitting colour. The pins are metal, shown as copper.
Catalogue models
The old catalogue's 17 Kingbright entries have no reference models. Each names an exact Kingbright part number, and each maps to the preset of that number, from that part's own sheet.
The family's other entries name other makers' displays (HDSP, HDSM, LTS, MAN, DE, ELD and KCSC02 parts). They are left with their reasons in COVERAGE.md.
-
1.0.0 Latest
Related parts
More #display
STEVEMIT
steve/chip-led
Kingbright surface-mount chip LEDs: APHHS1005 (0402), APT1608 (0603), APT2012 (0805), APT3216 (1206) and side-view APA1606.
STEVEMIT
steve/disc-varistor
Leaded disc varistors, TDK SIOV StandarD series S05, S07, S10, S14 and S20, every voltage class from 11 V to 1100 V.
STEVEMIT
steve/right-angle-tactile-switch
Right-angle 6 x 6 mm through-hole tactile switches, C&K PTS645V: round actuators 3.15 to 8.35 mm from the front leads, or the 6.15 mm square actuator.