4 files changed, +169 −46 1.1.0: MC 1,5 headers at 3.81 mm. MSTBA 2,5 parts are unchanged.

part.py +16 −8

Copy diff

		@@ -1,21 +1,29 @@
1		-"""PCB header for pluggable terminal blocks, Phoenix Contact MSTBA 2,5 type: right-angle, 5.0 or 5.08 mm pitch, 2 to 16 positions. Pin 1 is at the origin, the row
	1	+"""PCB header for pluggable terminal blocks, right-angle, Phoenix Contact MSTBA 2,5 type (5.0 or 5.08 mm, 2 to 16 positions) or MC 1,5 type (3.81 mm, 2 to 16). Pin 1 is at the origin, the row
2	2	along +X, the housing on the XY plane with its opening facing -Y, the solder pins down through the board. Dimensions from Phoenix Contact's data sheet in the README."""
3	3	from steve import Model
4	4
	5	+series = "MSTBA 2,5" # Series
5	6	pitch = 5.08 # mm Pitch
6	7	positions = 2 # Positions
7	8	detail = "full" # full: the opening, the mating pins and the solder pins; simple: the housing's outline
8	9
9		-# Phoenix Contact data sheet, MSTBA 2,5/ 2-G-5,08 (1757242), Dimensions p. 5 and Dimensional drawing p. 6: width a + 7 (5.0 mm) or a + 7.08 (5.08 mm), length 12,
	10	+# series: (pitches, length, height above the board, solder pin length, solder pins from the back face, past each end pin by pitch, pin section)
	11	+# MSTBA 2,5: data sheet MSTBA 2,5/ 2-G-5,08 (1757242), Dimensions p. 5 and Dimensional drawing p. 6: width a + 7 (5.0 mm) or a + 7.08 (5.08 mm), length 12,
10	12	# height 8.6 above the board, solder pins 3.5 long, 2 from the back face. The drawing gives the same housing for 5.0 and 5.08 mm pitch.
11		-LENGTH, HEIGHT, PIN_LENGTH, PIN_FROM_BACK = 12, 8.6, 3.5, 2
12		-PIN = 1.2 # the pin section, the wall and the mating pins' reach are proportions, for looks: the data sheet doesn't dimension them
	13	+# MC 1,5: data sheet MC 1,5/ 2-G-3,81 (1803277), Technische Daten p. 1 and Massszeichnung p. 4: width a + 5.2, length 9.2, height 7.25, solder pins 3.4 long,
	14	+# 0.8 x 0.8, 8 from the opening (1.2 from the back face).
	15	+SERIES = {
	16	+ "MSTBA 2,5": ((5.0, 5.08), 12, 8.6, 3.5, 2, {5.0: 3.5, 5.08: 3.54}, 1.2),
	17	+ "MC 1,5": ((3.81,), 9.2, 7.25, 3.4, 1.2, {3.81: 2.6}, 0.8),
	18	+}
	19	+pitches, LENGTH, HEIGHT, PIN_LENGTH, PIN_FROM_BACK, ENDS, PIN = SERIES[series]
	20	+# the wall and the mating pins' reach are proportions, for looks: the data sheets don't dimension them
13	21	SHORT = 1.5 # the mating pins stop this far short of the opening, where the plug's contacts meet them
14		-WALL = 1.0
15		-if pitch not in (5.0, 5.08) or not 2 <= positions <= 16:
16		- raise ValueError("MSTBA 2,5 comes in 5.0 and 5.08 mm pitch, 2 to 16 positions.")
	22	+WALL = 1.0 if series == "MSTBA 2,5" else 0.8
	23	+if pitch not in pitches or not 2 <= positions <= 16:
	24	+ raise ValueError(f"{series} comes in pitch {pitches}, 2 to 16 positions.")
17	25
18		-end = 3.5 if pitch == 5.0 else 3.54
	26	+end = ENDS[pitch]
19	27	width = (positions - 1) * pitch + 2 * end
20	28	x0 = -end
21	29	back = PIN_FROM_BACK

pypart.toml +12 −4

Copy diff

		@@ -1,15 +1,23 @@
1	1	name = "steve/pluggable-terminal-header"
2		-version = "1.0.0"
	2	+version = "1.1.0"
3	3	runtime = "steve"
4	4	license = "MIT"
5		-summary = "PCB header for pluggable terminal blocks, Phoenix Contact MSTBA 2,5 type: right-angle, 5.0 and 5.08 mm pitch, 2 to 16 positions."
6		-description = """Right-angle PCB header of the MSTBA 2,5 type, with its opening, mating pins and solder pins. Width, length, height and pins from Phoenix Contact's data sheet. See the README."""
	5	+summary = "PCB header for pluggable terminal blocks, right-angle: Phoenix Contact MSTBA 2,5 (5.0, 5.08 mm) and MC 1,5 (3.81 mm) types, 2 to 16 positions."
	6	+changes = "MC 1,5 headers at 3.81 mm. MSTBA 2,5 parts are unchanged."
	7	+description = """Right-angle PCB header of the MSTBA 2,5 or MC 1,5 type, with its opening, mating pins and solder pins. Width, length, height and pins from Phoenix Contact's data sheets. See the README."""
7	8	tags = ["terminal-block", "pluggable", "header", "phoenix", "mstb", "connector", "electronics"]
	9	+
	10	+[parameters.series]
	11	+type = "choice"
	12	+default = "MSTBA 2,5"
	13	+choices = ["MSTBA 2,5", "MC 1,5"]
	14	+label = "Series"
8	15
9	16	[parameters.pitch]
10	17	type = "choice"
11	18	default = 5.08
12		-choices = [5.0, 5.08]
	19	+choices = [3.81, 5.0, 5.08]
	20	+description = "MSTBA 2,5: 5.0 or 5.08. MC 1,5: 3.81."
13	21	unit = "mm"
14	22	label = "Pitch"
15	23

presets.toml +136 −31

Copy diff

		@@ -1,219 +1,324 @@
1	1	# Presets of this part (factory/PRESETS.md). Written by factory/gen.py.
	2	+
	3	+[[presets]]
	4	+id = "MC1.5-2-G-3.81"
	5	+title = "Pluggable terminal header, 2 positions, 3.81 mm, right-angle (MC 1,5)"
	6	+params = { series = "MC 1,5", pitch = 3.81, positions = 2 }
	7	+aliases = ["MC 1,5/2-G-3,81", "MC 1,5/2-G", "2 pin pluggable terminal header 3.81", "2 way pluggable terminal block 3.81mm", "2P pluggable header 3.81"]
	8	+standard = "Phoenix Contact"
	9	+
	10	+[[presets]]
	11	+id = "MC1.5-3-G-3.81"
	12	+title = "Pluggable terminal header, 3 positions, 3.81 mm, right-angle (MC 1,5)"
	13	+params = { series = "MC 1,5", pitch = 3.81, positions = 3 }
	14	+aliases = ["MC 1,5/3-G-3,81", "MC 1,5/3-G", "3 pin pluggable terminal header 3.81", "3 way pluggable terminal block 3.81mm", "3P pluggable header 3.81"]
	15	+standard = "Phoenix Contact"
	16	+
	17	+[[presets]]
	18	+id = "MC1.5-4-G-3.81"
	19	+title = "Pluggable terminal header, 4 positions, 3.81 mm, right-angle (MC 1,5)"
	20	+params = { series = "MC 1,5", pitch = 3.81, positions = 4 }
	21	+aliases = ["MC 1,5/4-G-3,81", "MC 1,5/4-G", "4 pin pluggable terminal header 3.81", "4 way pluggable terminal block 3.81mm", "4P pluggable header 3.81"]
	22	+standard = "Phoenix Contact"
	23	+
	24	+[[presets]]
	25	+id = "MC1.5-5-G-3.81"
	26	+title = "Pluggable terminal header, 5 positions, 3.81 mm, right-angle (MC 1,5)"
	27	+params = { series = "MC 1,5", pitch = 3.81, positions = 5 }
	28	+aliases = ["MC 1,5/5-G-3,81", "MC 1,5/5-G", "5 pin pluggable terminal header 3.81", "5 way pluggable terminal block 3.81mm", "5P pluggable header 3.81"]
	29	+standard = "Phoenix Contact"
	30	+
	31	+[[presets]]
	32	+id = "MC1.5-6-G-3.81"
	33	+title = "Pluggable terminal header, 6 positions, 3.81 mm, right-angle (MC 1,5)"
	34	+params = { series = "MC 1,5", pitch = 3.81, positions = 6 }
	35	+aliases = ["MC 1,5/6-G-3,81", "MC 1,5/6-G", "6 pin pluggable terminal header 3.81", "6 way pluggable terminal block 3.81mm", "6P pluggable header 3.81"]
	36	+standard = "Phoenix Contact"
	37	+
	38	+[[presets]]
	39	+id = "MC1.5-7-G-3.81"
	40	+title = "Pluggable terminal header, 7 positions, 3.81 mm, right-angle (MC 1,5)"
	41	+params = { series = "MC 1,5", pitch = 3.81, positions = 7 }
	42	+aliases = ["MC 1,5/7-G-3,81", "MC 1,5/7-G", "7 pin pluggable terminal header 3.81", "7 way pluggable terminal block 3.81mm", "7P pluggable header 3.81"]
	43	+standard = "Phoenix Contact"
	44	+
	45	+[[presets]]
	46	+id = "MC1.5-8-G-3.81"
	47	+title = "Pluggable terminal header, 8 positions, 3.81 mm, right-angle (MC 1,5)"
	48	+params = { series = "MC 1,5", pitch = 3.81, positions = 8 }
	49	+aliases = ["MC 1,5/8-G-3,81", "MC 1,5/8-G", "8 pin pluggable terminal header 3.81", "8 way pluggable terminal block 3.81mm", "8P pluggable header 3.81"]
	50	+standard = "Phoenix Contact"
	51	+
	52	+[[presets]]
	53	+id = "MC1.5-9-G-3.81"
	54	+title = "Pluggable terminal header, 9 positions, 3.81 mm, right-angle (MC 1,5)"
	55	+params = { series = "MC 1,5", pitch = 3.81, positions = 9 }
	56	+aliases = ["MC 1,5/9-G-3,81", "MC 1,5/9-G", "9 pin pluggable terminal header 3.81", "9 way pluggable terminal block 3.81mm", "9P pluggable header 3.81"]
	57	+standard = "Phoenix Contact"
	58	+
	59	+[[presets]]
	60	+id = "MC1.5-10-G-3.81"
	61	+title = "Pluggable terminal header, 10 positions, 3.81 mm, right-angle (MC 1,5)"
	62	+params = { series = "MC 1,5", pitch = 3.81, positions = 10 }
	63	+aliases = ["MC 1,5/10-G-3,81", "MC 1,5/10-G", "10 pin pluggable terminal header 3.81", "10 way pluggable terminal block 3.81mm", "10P pluggable header 3.81"]
	64	+standard = "Phoenix Contact"
	65	+
	66	+[[presets]]
	67	+id = "MC1.5-11-G-3.81"
	68	+title = "Pluggable terminal header, 11 positions, 3.81 mm, right-angle (MC 1,5)"
	69	+params = { series = "MC 1,5", pitch = 3.81, positions = 11 }
	70	+aliases = ["MC 1,5/11-G-3,81", "MC 1,5/11-G", "11 pin pluggable terminal header 3.81", "11 way pluggable terminal block 3.81mm", "11P pluggable header 3.81"]
	71	+standard = "Phoenix Contact"
	72	+
	73	+[[presets]]
	74	+id = "MC1.5-12-G-3.81"
	75	+title = "Pluggable terminal header, 12 positions, 3.81 mm, right-angle (MC 1,5)"
	76	+params = { series = "MC 1,5", pitch = 3.81, positions = 12 }
	77	+aliases = ["MC 1,5/12-G-3,81", "MC 1,5/12-G", "12 pin pluggable terminal header 3.81", "12 way pluggable terminal block 3.81mm", "12P pluggable header 3.81"]
	78	+standard = "Phoenix Contact"
	79	+
	80	+[[presets]]
	81	+id = "MC1.5-13-G-3.81"
	82	+title = "Pluggable terminal header, 13 positions, 3.81 mm, right-angle (MC 1,5)"
	83	+params = { series = "MC 1,5", pitch = 3.81, positions = 13 }
	84	+aliases = ["MC 1,5/13-G-3,81", "MC 1,5/13-G", "13 pin pluggable terminal header 3.81", "13 way pluggable terminal block 3.81mm", "13P pluggable header 3.81"]
	85	+standard = "Phoenix Contact"
	86	+
	87	+[[presets]]
	88	+id = "MC1.5-14-G-3.81"
	89	+title = "Pluggable terminal header, 14 positions, 3.81 mm, right-angle (MC 1,5)"
	90	+params = { series = "MC 1,5", pitch = 3.81, positions = 14 }
	91	+aliases = ["MC 1,5/14-G-3,81", "MC 1,5/14-G", "14 pin pluggable terminal header 3.81", "14 way pluggable terminal block 3.81mm", "14P pluggable header 3.81"]
	92	+standard = "Phoenix Contact"
	93	+
	94	+[[presets]]
	95	+id = "MC1.5-15-G-3.81"
	96	+title = "Pluggable terminal header, 15 positions, 3.81 mm, right-angle (MC 1,5)"
	97	+params = { series = "MC 1,5", pitch = 3.81, positions = 15 }
	98	+aliases = ["MC 1,5/15-G-3,81", "MC 1,5/15-G", "15 pin pluggable terminal header 3.81", "15 way pluggable terminal block 3.81mm", "15P pluggable header 3.81"]
	99	+standard = "Phoenix Contact"
	100	+
	101	+[[presets]]
	102	+id = "MC1.5-16-G-3.81"
	103	+title = "Pluggable terminal header, 16 positions, 3.81 mm, right-angle (MC 1,5)"
	104	+params = { series = "MC 1,5", pitch = 3.81, positions = 16 }
	105	+aliases = ["MC 1,5/16-G-3,81", "MC 1,5/16-G", "16 pin pluggable terminal header 3.81", "16 way pluggable terminal block 3.81mm", "16P pluggable header 3.81"]
	106	+standard = "Phoenix Contact"
2	107
3	108	[[presets]]
4	109	id = "MSTBA2.5-2-G-5.0"
5	110	title = "Pluggable terminal header, 2 positions, 5.0 mm, right-angle (MSTBA 2,5)"
6		-params = { pitch = 5, positions = 2 }
	111	+params = { series = "MSTBA 2,5", pitch = 5, positions = 2 }
7	112	aliases = ["MSTBA 2,5/2-G-5,0", "MSTBA 2,5/2-G", "2 pin pluggable terminal header 5.0", "2 way pluggable terminal block 5.0mm", "2P pluggable header 5.0"]
8	113	standard = "Phoenix Contact"
9	114
10	115	[[presets]]
11	116	id = "MSTBA2.5-3-G-5.0"
12	117	title = "Pluggable terminal header, 3 positions, 5.0 mm, right-angle (MSTBA 2,5)"
13		-params = { pitch = 5, positions = 3 }
	118	+params = { series = "MSTBA 2,5", pitch = 5, positions = 3 }
14	119	aliases = ["MSTBA 2,5/3-G-5,0", "MSTBA 2,5/3-G", "3 pin pluggable terminal header 5.0", "3 way pluggable terminal block 5.0mm", "3P pluggable header 5.0"]
15	120	standard = "Phoenix Contact"
16	121
17	122	[[presets]]
18	123	id = "MSTBA2.5-4-G-5.0"
19	124	title = "Pluggable terminal header, 4 positions, 5.0 mm, right-angle (MSTBA 2,5)"
20		-params = { pitch = 5, positions = 4 }
	125	+params = { series = "MSTBA 2,5", pitch = 5, positions = 4 }
21	126	aliases = ["MSTBA 2,5/4-G-5,0", "MSTBA 2,5/4-G", "4 pin pluggable terminal header 5.0", "4 way pluggable terminal block 5.0mm", "4P pluggable header 5.0"]
22	127	standard = "Phoenix Contact"
23	128
24	129	[[presets]]
25	130	id = "MSTBA2.5-5-G-5.0"
26	131	title = "Pluggable terminal header, 5 positions, 5.0 mm, right-angle (MSTBA 2,5)"
27		-params = { pitch = 5, positions = 5 }
	132	+params = { series = "MSTBA 2,5", pitch = 5, positions = 5 }
28	133	aliases = ["MSTBA 2,5/5-G-5,0", "MSTBA 2,5/5-G", "5 pin pluggable terminal header 5.0", "5 way pluggable terminal block 5.0mm", "5P pluggable header 5.0"]
29	134	standard = "Phoenix Contact"
30	135
31	136	[[presets]]
32	137	id = "MSTBA2.5-6-G-5.0"
33	138	title = "Pluggable terminal header, 6 positions, 5.0 mm, right-angle (MSTBA 2,5)"
34		-params = { pitch = 5, positions = 6 }
	139	+params = { series = "MSTBA 2,5", pitch = 5, positions = 6 }
35	140	aliases = ["MSTBA 2,5/6-G-5,0", "MSTBA 2,5/6-G", "6 pin pluggable terminal header 5.0", "6 way pluggable terminal block 5.0mm", "6P pluggable header 5.0"]
36	141	standard = "Phoenix Contact"
37	142
38	143	[[presets]]
39	144	id = "MSTBA2.5-7-G-5.0"
40	145	title = "Pluggable terminal header, 7 positions, 5.0 mm, right-angle (MSTBA 2,5)"
41		-params = { pitch = 5, positions = 7 }
	146	+params = { series = "MSTBA 2,5", pitch = 5, positions = 7 }
42	147	aliases = ["MSTBA 2,5/7-G-5,0", "MSTBA 2,5/7-G", "7 pin pluggable terminal header 5.0", "7 way pluggable terminal block 5.0mm", "7P pluggable header 5.0"]
43	148	standard = "Phoenix Contact"
44	149
45	150	[[presets]]
46	151	id = "MSTBA2.5-8-G-5.0"
47	152	title = "Pluggable terminal header, 8 positions, 5.0 mm, right-angle (MSTBA 2,5)"
48		-params = { pitch = 5, positions = 8 }
	153	+params = { series = "MSTBA 2,5", pitch = 5, positions = 8 }
49	154	aliases = ["MSTBA 2,5/8-G-5,0", "MSTBA 2,5/8-G", "8 pin pluggable terminal header 5.0", "8 way pluggable terminal block 5.0mm", "8P pluggable header 5.0"]
50	155	standard = "Phoenix Contact"
51	156
52	157	[[presets]]
53	158	id = "MSTBA2.5-9-G-5.0"
54	159	title = "Pluggable terminal header, 9 positions, 5.0 mm, right-angle (MSTBA 2,5)"
55		-params = { pitch = 5, positions = 9 }
	160	+params = { series = "MSTBA 2,5", pitch = 5, positions = 9 }
56	161	aliases = ["MSTBA 2,5/9-G-5,0", "MSTBA 2,5/9-G", "9 pin pluggable terminal header 5.0", "9 way pluggable terminal block 5.0mm", "9P pluggable header 5.0"]
57	162	standard = "Phoenix Contact"
58	163
59	164	[[presets]]
60	165	id = "MSTBA2.5-10-G-5.0"
61	166	title = "Pluggable terminal header, 10 positions, 5.0 mm, right-angle (MSTBA 2,5)"
62		-params = { pitch = 5, positions = 10 }
	167	+params = { series = "MSTBA 2,5", pitch = 5, positions = 10 }
63	168	aliases = ["MSTBA 2,5/10-G-5,0", "MSTBA 2,5/10-G", "10 pin pluggable terminal header 5.0", "10 way pluggable terminal block 5.0mm", "10P pluggable header 5.0"]
64	169	standard = "Phoenix Contact"
65	170
66	171	[[presets]]
67	172	id = "MSTBA2.5-11-G-5.0"
68	173	title = "Pluggable terminal header, 11 positions, 5.0 mm, right-angle (MSTBA 2,5)"
69		-params = { pitch = 5, positions = 11 }
	174	+params = { series = "MSTBA 2,5", pitch = 5, positions = 11 }
70	175	aliases = ["MSTBA 2,5/11-G-5,0", "MSTBA 2,5/11-G", "11 pin pluggable terminal header 5.0", "11 way pluggable terminal block 5.0mm", "11P pluggable header 5.0"]
71	176	standard = "Phoenix Contact"
72	177
73	178	[[presets]]
74	179	id = "MSTBA2.5-12-G-5.0"
75	180	title = "Pluggable terminal header, 12 positions, 5.0 mm, right-angle (MSTBA 2,5)"
76		-params = { pitch = 5, positions = 12 }
	181	+params = { series = "MSTBA 2,5", pitch = 5, positions = 12 }
77	182	aliases = ["MSTBA 2,5/12-G-5,0", "MSTBA 2,5/12-G", "12 pin pluggable terminal header 5.0", "12 way pluggable terminal block 5.0mm", "12P pluggable header 5.0"]
78	183	standard = "Phoenix Contact"
79	184
80	185	[[presets]]
81	186	id = "MSTBA2.5-13-G-5.0"
82	187	title = "Pluggable terminal header, 13 positions, 5.0 mm, right-angle (MSTBA 2,5)"
83		-params = { pitch = 5, positions = 13 }
	188	+params = { series = "MSTBA 2,5", pitch = 5, positions = 13 }
84	189	aliases = ["MSTBA 2,5/13-G-5,0", "MSTBA 2,5/13-G", "13 pin pluggable terminal header 5.0", "13 way pluggable terminal block 5.0mm", "13P pluggable header 5.0"]
85	190	standard = "Phoenix Contact"
86	191
87	192	[[presets]]
88	193	id = "MSTBA2.5-14-G-5.0"
89	194	title = "Pluggable terminal header, 14 positions, 5.0 mm, right-angle (MSTBA 2,5)"
90		-params = { pitch = 5, positions = 14 }
	195	+params = { series = "MSTBA 2,5", pitch = 5, positions = 14 }
91	196	aliases = ["MSTBA 2,5/14-G-5,0", "MSTBA 2,5/14-G", "14 pin pluggable terminal header 5.0", "14 way pluggable terminal block 5.0mm", "14P pluggable header 5.0"]
92	197	standard = "Phoenix Contact"
93	198
94	199	[[presets]]
95	200	id = "MSTBA2.5-15-G-5.0"
96	201	title = "Pluggable terminal header, 15 positions, 5.0 mm, right-angle (MSTBA 2,5)"
97		-params = { pitch = 5, positions = 15 }
	202	+params = { series = "MSTBA 2,5", pitch = 5, positions = 15 }
98	203	aliases = ["MSTBA 2,5/15-G-5,0", "MSTBA 2,5/15-G", "15 pin pluggable terminal header 5.0", "15 way pluggable terminal block 5.0mm", "15P pluggable header 5.0"]
99	204	standard = "Phoenix Contact"
100	205
101	206	[[presets]]
102	207	id = "MSTBA2.5-16-G-5.0"
103	208	title = "Pluggable terminal header, 16 positions, 5.0 mm, right-angle (MSTBA 2,5)"
104		-params = { pitch = 5, positions = 16 }
	209	+params = { series = "MSTBA 2,5", pitch = 5, positions = 16 }
105	210	aliases = ["MSTBA 2,5/16-G-5,0", "MSTBA 2,5/16-G", "16 pin pluggable terminal header 5.0", "16 way pluggable terminal block 5.0mm", "16P pluggable header 5.0"]
106	211	standard = "Phoenix Contact"
107	212
108	213	[[presets]]
109	214	id = "MSTBA2.5-2-G-5.08"
110	215	title = "Pluggable terminal header, 2 positions, 5.08 mm, right-angle (MSTBA 2,5)"
111		-params = { pitch = 5.08, positions = 2 }
	216	+params = { series = "MSTBA 2,5", pitch = 5.08, positions = 2 }
112	217	aliases = ["MSTBA 2,5/2-G-5,08", "MSTBA 2,5/2-G", "2 pin pluggable terminal header 5.08", "2 way pluggable terminal block 5.08mm", "2P pluggable header 5.08"]
113	218	standard = "Phoenix Contact"
114	219
115	220	[[presets]]
116	221	id = "MSTBA2.5-3-G-5.08"
117	222	title = "Pluggable terminal header, 3 positions, 5.08 mm, right-angle (MSTBA 2,5)"
118		-params = { pitch = 5.08, positions = 3 }
	223	+params = { series = "MSTBA 2,5", pitch = 5.08, positions = 3 }
119	224	aliases = ["MSTBA 2,5/3-G-5,08", "MSTBA 2,5/3-G", "3 pin pluggable terminal header 5.08", "3 way pluggable terminal block 5.08mm", "3P pluggable header 5.08"]
120	225	standard = "Phoenix Contact"
121	226
122	227	[[presets]]
123	228	id = "MSTBA2.5-4-G-5.08"
124	229	title = "Pluggable terminal header, 4 positions, 5.08 mm, right-angle (MSTBA 2,5)"
125		-params = { pitch = 5.08, positions = 4 }
	230	+params = { series = "MSTBA 2,5", pitch = 5.08, positions = 4 }
126	231	aliases = ["MSTBA 2,5/4-G-5,08", "MSTBA 2,5/4-G", "4 pin pluggable terminal header 5.08", "4 way pluggable terminal block 5.08mm", "4P pluggable header 5.08"]
127	232	standard = "Phoenix Contact"
128	233
129	234	[[presets]]
130	235	id = "MSTBA2.5-5-G-5.08"
131	236	title = "Pluggable terminal header, 5 positions, 5.08 mm, right-angle (MSTBA 2,5)"
132		-params = { pitch = 5.08, positions = 5 }
	237	+params = { series = "MSTBA 2,5", pitch = 5.08, positions = 5 }
133	238	aliases = ["MSTBA 2,5/5-G-5,08", "MSTBA 2,5/5-G", "5 pin pluggable terminal header 5.08", "5 way pluggable terminal block 5.08mm", "5P pluggable header 5.08"]
134	239	standard = "Phoenix Contact"
135	240
136	241	[[presets]]
137	242	id = "MSTBA2.5-6-G-5.08"
138	243	title = "Pluggable terminal header, 6 positions, 5.08 mm, right-angle (MSTBA 2,5)"
139		-params = { pitch = 5.08, positions = 6 }
	244	+params = { series = "MSTBA 2,5", pitch = 5.08, positions = 6 }
140	245	aliases = ["MSTBA 2,5/6-G-5,08", "MSTBA 2,5/6-G", "6 pin pluggable terminal header 5.08", "6 way pluggable terminal block 5.08mm", "6P pluggable header 5.08"]
141	246	standard = "Phoenix Contact"
142	247
143	248	[[presets]]
144	249	id = "MSTBA2.5-7-G-5.08"
145	250	title = "Pluggable terminal header, 7 positions, 5.08 mm, right-angle (MSTBA 2,5)"
146		-params = { pitch = 5.08, positions = 7 }
	251	+params = { series = "MSTBA 2,5", pitch = 5.08, positions = 7 }
147	252	aliases = ["MSTBA 2,5/7-G-5,08", "MSTBA 2,5/7-G", "7 pin pluggable terminal header 5.08", "7 way pluggable terminal block 5.08mm", "7P pluggable header 5.08"]
148	253	standard = "Phoenix Contact"
149	254
150	255	[[presets]]
151	256	id = "MSTBA2.5-8-G-5.08"
152	257	title = "Pluggable terminal header, 8 positions, 5.08 mm, right-angle (MSTBA 2,5)"
153		-params = { pitch = 5.08, positions = 8 }
	258	+params = { series = "MSTBA 2,5", pitch = 5.08, positions = 8 }
154	259	aliases = ["MSTBA 2,5/8-G-5,08", "MSTBA 2,5/8-G", "8 pin pluggable terminal header 5.08", "8 way pluggable terminal block 5.08mm", "8P pluggable header 5.08"]
155	260	standard = "Phoenix Contact"
156	261
157	262	[[presets]]
158	263	id = "MSTBA2.5-9-G-5.08"
159	264	title = "Pluggable terminal header, 9 positions, 5.08 mm, right-angle (MSTBA 2,5)"
160		-params = { pitch = 5.08, positions = 9 }
	265	+params = { series = "MSTBA 2,5", pitch = 5.08, positions = 9 }
161	266	aliases = ["MSTBA 2,5/9-G-5,08", "MSTBA 2,5/9-G", "9 pin pluggable terminal header 5.08", "9 way pluggable terminal block 5.08mm", "9P pluggable header 5.08"]
162	267	standard = "Phoenix Contact"
163	268
164	269	[[presets]]
165	270	id = "MSTBA2.5-10-G-5.08"
166	271	title = "Pluggable terminal header, 10 positions, 5.08 mm, right-angle (MSTBA 2,5)"
167		-params = { pitch = 5.08, positions = 10 }
	272	+params = { series = "MSTBA 2,5", pitch = 5.08, positions = 10 }
168	273	aliases = ["MSTBA 2,5/10-G-5,08", "MSTBA 2,5/10-G", "10 pin pluggable terminal header 5.08", "10 way pluggable terminal block 5.08mm", "10P pluggable header 5.08"]
169	274	standard = "Phoenix Contact"
170	275
171	276	[[presets]]
172	277	id = "MSTBA2.5-11-G-5.08"
173	278	title = "Pluggable terminal header, 11 positions, 5.08 mm, right-angle (MSTBA 2,5)"
174		-params = { pitch = 5.08, positions = 11 }
	279	+params = { series = "MSTBA 2,5", pitch = 5.08, positions = 11 }
175	280	aliases = ["MSTBA 2,5/11-G-5,08", "MSTBA 2,5/11-G", "11 pin pluggable terminal header 5.08", "11 way pluggable terminal block 5.08mm", "11P pluggable header 5.08"]
176	281	standard = "Phoenix Contact"
177	282
178	283	[[presets]]
179	284	id = "MSTBA2.5-12-G-5.08"
180	285	title = "Pluggable terminal header, 12 positions, 5.08 mm, right-angle (MSTBA 2,5)"
181		-params = { pitch = 5.08, positions = 12 }
	286	+params = { series = "MSTBA 2,5", pitch = 5.08, positions = 12 }
182	287	aliases = ["MSTBA 2,5/12-G-5,08", "MSTBA 2,5/12-G", "12 pin pluggable terminal header 5.08", "12 way pluggable terminal block 5.08mm", "12P pluggable header 5.08"]
183	288	standard = "Phoenix Contact"
184	289
185	290	[[presets]]
186	291	id = "MSTBA2.5-13-G-5.08"
187	292	title = "Pluggable terminal header, 13 positions, 5.08 mm, right-angle (MSTBA 2,5)"
188		-params = { pitch = 5.08, positions = 13 }
	293	+params = { series = "MSTBA 2,5", pitch = 5.08, positions = 13 }
189	294	aliases = ["MSTBA 2,5/13-G-5,08", "MSTBA 2,5/13-G", "13 pin pluggable terminal header 5.08", "13 way pluggable terminal block 5.08mm", "13P pluggable header 5.08"]
190	295	standard = "Phoenix Contact"
191	296
192	297	[[presets]]
193	298	id = "MSTBA2.5-14-G-5.08"
194	299	title = "Pluggable terminal header, 14 positions, 5.08 mm, right-angle (MSTBA 2,5)"
195		-params = { pitch = 5.08, positions = 14 }
	300	+params = { series = "MSTBA 2,5", pitch = 5.08, positions = 14 }
196	301	aliases = ["MSTBA 2,5/14-G-5,08", "MSTBA 2,5/14-G", "14 pin pluggable terminal header 5.08", "14 way pluggable terminal block 5.08mm", "14P pluggable header 5.08"]
197	302	standard = "Phoenix Contact"
198	303
199	304	[[presets]]
200	305	id = "MSTBA2.5-15-G-5.08"
201	306	title = "Pluggable terminal header, 15 positions, 5.08 mm, right-angle (MSTBA 2,5)"
202		-params = { pitch = 5.08, positions = 15 }
	307	+params = { series = "MSTBA 2,5", pitch = 5.08, positions = 15 }
203	308	aliases = ["MSTBA 2,5/15-G-5,08", "MSTBA 2,5/15-G", "15 pin pluggable terminal header 5.08", "15 way pluggable terminal block 5.08mm", "15P pluggable header 5.08"]
204	309	standard = "Phoenix Contact"
205	310
206	311	[[presets]]
207	312	id = "MSTBA2.5-16-G-5.08"
208	313	title = "Pluggable terminal header, 16 positions, 5.08 mm, right-angle (MSTBA 2,5)"
209		-params = { pitch = 5.08, positions = 16 }
	314	+params = { series = "MSTBA 2,5", pitch = 5.08, positions = 16 }
210	315	aliases = ["MSTBA 2,5/16-G-5,08", "MSTBA 2,5/16-G", "16 pin pluggable terminal header 5.08", "16 way pluggable terminal block 5.08mm", "16P pluggable header 5.08"]
211	316	standard = "Phoenix Contact"
212	317
213	318	[[presets]]
214	319	id = "MSTBA2.5-2-G-5.08-simple"
215	320	title = "Pluggable terminal header, 2 positions, 5.08 mm, simple"
216		-params = { pitch = 5.08, positions = 2, detail = "simple" }
	321	+params = { series = "MSTBA 2,5", pitch = 5.08, positions = 2, detail = "simple" }
217	322	aliases = ["MSTBA 2,5/2-G-5,08 simple"]
218	323	standard = "Phoenix Contact"
219	324

README.md +5 −3

Copy diff

		@@ -1,6 +1,6 @@
1	1	# Pluggable terminal block header
2	2
3		-A right-angle PCB header for pluggable terminal blocks, of the Phoenix Contact MSTBA 2,5 type, 5.0 or 5.08 mm pitch, 2 to 16 positions. Pin 1 is at the origin, the row runs along +X, and the housing sits on the XY plane with its opening facing -Y. The solder pins go down through the board.
	3	+A right-angle PCB header for pluggable terminal blocks, of the Phoenix Contact MSTBA 2,5 type (5.0 or 5.08 mm pitch) or MC 1,5 type (3.81 mm), 2 to 16 positions. Pin 1 is at the origin, the row runs along +X, and the housing sits on the XY plane with its opening facing -Y. The solder pins go down through the board.
4	4
5	5	## Source
6	6
		@@ -11,7 +11,9 @@
11	11
12	12	The data sheet is for the 2-position, 5.08 mm part. Its drawing gives the same housing for both pitches.
13	13
14		-**Proportions, for looks only:** the pin section, the wall, and the mating pins' reach. The data sheet's side view doesn't dimension the reach, so the pins run to 1.5 mm short of the opening, where the plug's contacts meet them. The plug isn't part of this header. The housing is PA, modelled as `pa6`, green.
	14	+MC 1,5: data sheet *MC 1,5/ 2-G-3,81* (1803277, German, 10.03.2011), a copy at <https://asset.conrad.com/media10/add/160267/c1/-/de/000740533DS02/tehnicni-podatki-740533-pinsko-ohisje-za-tiskano-vezje-mc-phoenix-contact-1803277-raster-381-mm-1-kos.pdf>. Technical data (page 1): length 9.2, pins 0.8 x 0.8. Dimensional drawing (page 4): width a + 5.2, height 7.25, solder pins 3.4 long and 8 from the opening.
15	15
16		-Vertical (MSTBVA) and flanged (GF) headers aren't here yet; see `COVERAGE.md`.
	16	+**Proportions, for looks only:** the MSTBA pin section (1.2), the wall, and the mating pins' reach. The data sheet's side view doesn't dimension the reach, so the pins run to 1.5 mm short of the opening, where the plug's contacts meet them. The plug isn't part of this header. The housing is PA, modelled as `pa6`, green.
17	17
	18	+Vertical (MSTBVA, MCV), flanged (GF) and 3.5 mm MC headers aren't here yet; see `COVERAGE.md`.
	19	+