steve/pcb-card-guide

PCB card guide and board retaining clip, boards 1 to 2.4 mm, any length: simplified, measured from step.parts' models.

v1.0.0 Latest STEVE MIT 0

Open in STEVE

Isometric

Parameters

Preset50 sizes

Kind2 options

Board thickness5 options

mm; the slot is 0.3 mm wider.

Length5–1000 mm

Material3 options

unspecified (no material assigned), nylon (PA6) or POM.

Defaults built

part.py 49 lines · Python · STEVE runtime · checked

Download

"""PCB card guide and board retaining clip, boards 1 to 2.4 mm thick, any length: as step.parts' published models

draw them.

A rectangular bar along X (centred on the origin, base on the XY plane) with a board slot along its top:

- guide: the slot runs the full length;

- retain-clip: the slot stops short of the +X end, and an end lip stands above the bar there, overhanging the end.

See the README.

"""

from steve import Model

kind = "guide" # Kind: guide or retain-clip

board = "1.6" # Board thickness (mm)

length = 100 # mm Length

material = "unspecified" # Material

# mm, measured on step.parts' models pcb_card_guide_board<t>mm_l<length> and pcb_board_retain_clip_... (every planar

# face read): the same body for every board and length

BODY = {

"width": 8.0, # across (Y)

"height": 6.0, # bar top (Z)

"floor": 1.8, # slot floor above the base

"lip_top": 6.6, # clip: lip top

"lip_inset": 1.0, # clip: the slot stops this far from the +X end; the lip starts there

"lip_overhang": 1.0, # clip: the lip overhangs the +X end by this

}

# board thickness: slot width (board + 0.3 in every model)

SLOTS = {"1": 1.3, "1.2": 1.5, "1.6": 1.9, "2": 2.3, "2.4": 2.7}

# material choice: (STEVE material library id, appearance colour); the models name no material

MATERIALS = {"unspecified": (None, None), "nylon": ("pa6", "#ece9e1"), "pom": ("pom-copolymer", "#f2f2ee")}

b = BODY

slot = SLOTS[board]

material_id, colour = MATERIALS[material]

end = length / 2

model = Model()

model.box("bar", length, b["width"], b["height"], at=(0, 0, b["height"] / 2), name="Bar")

slot_end = end if kind == "guide" else end - b["lip_inset"]

model.box("slot", slot_end + end, slot, b["height"], at=((slot_end - end) / 2, 0, b["floor"] + b["height"] / 2),

op="cut", name="Board slot")

if kind == "retain-clip":

lip_len = b["lip_inset"] + b["lip_overhang"]

lip_h = b["lip_top"] - b["floor"]

model.box("lip", lip_len, b["width"], lip_h,

at=(end - b["lip_inset"] + lip_len / 2, 0, b["floor"] + lip_h / 2), op="join", name="End lip")

if material_id:

model.material(material_id, color=colour)

result = model.result()

"""PCB card guide and board retaining clip, boards 1 to 2.4 mm thick, any length: as step.parts' published models
draw them.

A rectangular bar along X (centred on the origin, base on the XY plane) with a board slot along its top:
- guide: the slot runs the full length;
- retain-clip: the slot stops short of the +X end, and an end lip stands above the bar there, overhanging the end.
See the README.
"""
from steve import Model

kind = "guide"  # Kind: guide or retain-clip
board = "1.6"  # Board thickness (mm)
length = 100  # mm Length
material = "unspecified"  # Material

# mm, measured on step.parts' models pcb_card_guide_board<t>mm_l<length> and pcb_board_retain_clip_... (every planar
# face read): the same body for every board and length
BODY = {
    "width": 8.0,        # across (Y)
    "height": 6.0,       # bar top (Z)
    "floor": 1.8,        # slot floor above the base
    "lip_top": 6.6,      # clip: lip top
    "lip_inset": 1.0,    # clip: the slot stops this far from the +X end; the lip starts there
    "lip_overhang": 1.0, # clip: the lip overhangs the +X end by this
}
# board thickness: slot width (board + 0.3 in every model)
SLOTS = {"1": 1.3, "1.2": 1.5, "1.6": 1.9, "2": 2.3, "2.4": 2.7}
# material choice: (STEVE material library id, appearance colour); the models name no material
MATERIALS = {"unspecified": (None, None), "nylon": ("pa6", "#ece9e1"), "pom": ("pom-copolymer", "#f2f2ee")}

b = BODY
slot = SLOTS[board]
material_id, colour = MATERIALS[material]
end = length / 2

model = Model()
model.box("bar", length, b["width"], b["height"], at=(0, 0, b["height"] / 2), name="Bar")
slot_end = end if kind == "guide" else end - b["lip_inset"]
model.box("slot", slot_end + end, slot, b["height"], at=((slot_end - end) / 2, 0, b["floor"] + b["height"] / 2),
          op="cut", name="Board slot")
if kind == "retain-clip":
    lip_len = b["lip_inset"] + b["lip_overhang"]
    lip_h = b["lip_top"] - b["floor"]
    model.box("lip", lip_len, b["width"], lip_h,
              at=(end - b["lip_inset"] + lip_len / 2, 0, b["floor"] + lip_h / 2), op="join", name="End lip")
if material_id:
    model.material(material_id, color=colour)
result = model.result()

pypart.toml 41 lines · TOML

Download

name = "steve/pcb-card-guide"

version = "1.0.0"

runtime = "steve"

license = "MIT"

summary = "PCB card guide and board retaining clip, boards 1 to 2.4 mm, any length: simplified, measured from step.parts' models."

description = """A simplified PCB card guide for assemblies: an 8 x 6 mm bar with a board slot along its top (slot = \

board thickness + 0.3 mm), or a board retaining clip (the slot stopping short of one end, with an end lip). Boards 1, \

1.2, 1.6, 2 and 2.4 mm thick, any length. Measured from step.parts' published models (MIT); no standard or maker \

drawing covers these generic guides.

Along X, centred on the origin, base on the XY plane. Dimensions and attribution: see the README."""

tags = ["pcb", "card-guide", "board-guide", "electronics", "enclosure", "metric"]

[parameters.kind]

type = "choice"

default = "guide"

choices = ["guide", "retain-clip"]

label = "Kind"

[parameters.board]

type = "choice"

default = "1.6"

choices = ["1", "1.2", "1.6", "2", "2.4"]

label = "Board thickness"

description = "mm; the slot is 0.3 mm wider."

[parameters.length]

type = "number"

default = 100

min = 5

max = 1000

unit = "mm"

label = "Length"

[parameters.material]

type = "choice"

default = "unspecified"

choices = ["unspecified", "nylon", "pom"]

label = "Material"

description = "unspecified (no material assigned), nylon (PA6) or POM."

name = "steve/pcb-card-guide"
version = "1.0.0"
runtime = "steve"
license = "MIT"
summary = "PCB card guide and board retaining clip, boards 1 to 2.4 mm, any length: simplified, measured from step.parts' models."
description = """A simplified PCB card guide for assemblies: an 8 x 6 mm bar with a board slot along its top (slot = \
board thickness + 0.3 mm), or a board retaining clip (the slot stopping short of one end, with an end lip). Boards 1, \
1.2, 1.6, 2 and 2.4 mm thick, any length. Measured from step.parts' published models (MIT); no standard or maker \
drawing covers these generic guides.

Along X, centred on the origin, base on the XY plane. Dimensions and attribution: see the README."""
tags = ["pcb", "card-guide", "board-guide", "electronics", "enclosure", "metric"]

[parameters.kind]
type = "choice"
default = "guide"
choices = ["guide", "retain-clip"]
label = "Kind"

[parameters.board]
type = "choice"
default = "1.6"
choices = ["1", "1.2", "1.6", "2", "2.4"]
label = "Board thickness"
description = "mm; the slot is 0.3 mm wider."

[parameters.length]
type = "number"
default = 100
min = 5
max = 1000
unit = "mm"
label = "Length"

[parameters.material]
type = "choice"
default = "unspecified"
choices = ["unspecified", "nylon", "pom"]
label = "Material"
description = "unspecified (no material assigned), nylon (PA6) or POM."

presets.toml 352 lines · TOML

Download

# Presets of this part (factory/PRESETS.md). Written by factory/gen.py.

[[presets]]

id = "guide-1-50"

title = "PCB card guide, 1 mm board, 50 mm (simplified)"

params = { kind = "guide", board = "1", length = 50 }

aliases = ["card guide 1 mm board 50", "board guide rail 50 mm", "PCB guide 1x50"]

standard = "step.parts card guide model"

[[presets]]

id = "guide-1-75"

title = "PCB card guide, 1 mm board, 75 mm (simplified)"

params = { kind = "guide", board = "1", length = 75 }

aliases = ["card guide 1 mm board 75", "board guide rail 75 mm", "PCB guide 1x75"]

standard = "step.parts card guide model"

[[presets]]

id = "guide-1-100"

title = "PCB card guide, 1 mm board, 100 mm (simplified)"

params = { kind = "guide", board = "1", length = 100 }

aliases = ["card guide 1 mm board 100", "board guide rail 100 mm", "PCB guide 1x100"]

standard = "step.parts card guide model"

[[presets]]

id = "guide-1-150"

title = "PCB card guide, 1 mm board, 150 mm (simplified)"

params = { kind = "guide", board = "1", length = 150 }

aliases = ["card guide 1 mm board 150", "board guide rail 150 mm", "PCB guide 1x150"]

standard = "step.parts card guide model"

[[presets]]

id = "guide-1-200"

title = "PCB card guide, 1 mm board, 200 mm (simplified)"

params = { kind = "guide", board = "1", length = 200 }

aliases = ["card guide 1 mm board 200", "board guide rail 200 mm", "PCB guide 1x200"]

standard = "step.parts card guide model"

[[presets]]

id = "guide-1.2-50"

title = "PCB card guide, 1.2 mm board, 50 mm (simplified)"

params = { kind = "guide", board = "1.2", length = 50 }

aliases = ["card guide 1.2 mm board 50", "board guide rail 50 mm", "PCB guide 1.2x50"]

standard = "step.parts card guide model"

[[presets]]

id = "guide-1.2-75"

title = "PCB card guide, 1.2 mm board, 75 mm (simplified)"

params = { kind = "guide", board = "1.2", length = 75 }

aliases = ["card guide 1.2 mm board 75", "board guide rail 75 mm", "PCB guide 1.2x75"]

standard = "step.parts card guide model"

[[presets]]

id = "guide-1.2-100"

title = "PCB card guide, 1.2 mm board, 100 mm (simplified)"

params = { kind = "guide", board = "1.2", length = 100 }

aliases = ["card guide 1.2 mm board 100", "board guide rail 100 mm", "PCB guide 1.2x100"]

standard = "step.parts card guide model"

[[presets]]

id = "guide-1.2-150"

title = "PCB card guide, 1.2 mm board, 150 mm (simplified)"

params = { kind = "guide", board = "1.2", length = 150 }

aliases = ["card guide 1.2 mm board 150", "board guide rail 150 mm", "PCB guide 1.2x150"]

standard = "step.parts card guide model"

[[presets]]

id = "guide-1.2-200"

title = "PCB card guide, 1.2 mm board, 200 mm (simplified)"

params = { kind = "guide", board = "1.2", length = 200 }

aliases = ["card guide 1.2 mm board 200", "board guide rail 200 mm", "PCB guide 1.2x200"]

standard = "step.parts card guide model"

[[presets]]

id = "guide-1.6-50"

title = "PCB card guide, 1.6 mm board, 50 mm (simplified)"

params = { kind = "guide", board = "1.6", length = 50 }

aliases = ["card guide 1.6 mm board 50", "board guide rail 50 mm", "PCB guide 1.6x50"]

standard = "step.parts card guide model"

[[presets]]

id = "guide-1.6-75"

title = "PCB card guide, 1.6 mm board, 75 mm (simplified)"

params = { kind = "guide", board = "1.6", length = 75 }

aliases = ["card guide 1.6 mm board 75", "board guide rail 75 mm", "PCB guide 1.6x75"]

standard = "step.parts card guide model"

[[presets]]

id = "guide-1.6-100"

title = "PCB card guide, 1.6 mm board, 100 mm (simplified)"

params = { kind = "guide", board = "1.6", length = 100 }

aliases = ["card guide 1.6 mm board 100", "board guide rail 100 mm", "PCB guide 1.6x100"]

standard = "step.parts card guide model"

[[presets]]

id = "guide-1.6-150"

title = "PCB card guide, 1.6 mm board, 150 mm (simplified)"

params = { kind = "guide", board = "1.6", length = 150 }

aliases = ["card guide 1.6 mm board 150", "board guide rail 150 mm", "PCB guide 1.6x150"]

standard = "step.parts card guide model"

100

101

[[presets]]

102

id = "guide-1.6-200"

103

title = "PCB card guide, 1.6 mm board, 200 mm (simplified)"

104

params = { kind = "guide", board = "1.6", length = 200 }

105

aliases = ["card guide 1.6 mm board 200", "board guide rail 200 mm", "PCB guide 1.6x200"]

106

standard = "step.parts card guide model"

107

108

[[presets]]

109

id = "guide-2-50"

110

title = "PCB card guide, 2 mm board, 50 mm (simplified)"

111

params = { kind = "guide", board = "2", length = 50 }

112

aliases = ["card guide 2 mm board 50", "board guide rail 50 mm", "PCB guide 2x50"]

113

standard = "step.parts card guide model"

114

115

[[presets]]

116

id = "guide-2-75"

117

title = "PCB card guide, 2 mm board, 75 mm (simplified)"

118

params = { kind = "guide", board = "2", length = 75 }

119

aliases = ["card guide 2 mm board 75", "board guide rail 75 mm", "PCB guide 2x75"]

120

standard = "step.parts card guide model"

121

122

[[presets]]

123

id = "guide-2-100"

124

title = "PCB card guide, 2 mm board, 100 mm (simplified)"

125

params = { kind = "guide", board = "2", length = 100 }

126

aliases = ["card guide 2 mm board 100", "board guide rail 100 mm", "PCB guide 2x100"]

127

standard = "step.parts card guide model"

128

129

[[presets]]

130

id = "guide-2-150"

131

title = "PCB card guide, 2 mm board, 150 mm (simplified)"

132

params = { kind = "guide", board = "2", length = 150 }

133

aliases = ["card guide 2 mm board 150", "board guide rail 150 mm", "PCB guide 2x150"]

134

standard = "step.parts card guide model"

135

136

[[presets]]

137

id = "guide-2-200"

138

title = "PCB card guide, 2 mm board, 200 mm (simplified)"

139

params = { kind = "guide", board = "2", length = 200 }

140

aliases = ["card guide 2 mm board 200", "board guide rail 200 mm", "PCB guide 2x200"]

141

standard = "step.parts card guide model"

142

143

[[presets]]

144

id = "guide-2.4-50"

145

title = "PCB card guide, 2.4 mm board, 50 mm (simplified)"

146

params = { kind = "guide", board = "2.4", length = 50 }

147

aliases = ["card guide 2.4 mm board 50", "board guide rail 50 mm", "PCB guide 2.4x50"]

148

standard = "step.parts card guide model"

149

150

[[presets]]

151

id = "guide-2.4-75"

152

title = "PCB card guide, 2.4 mm board, 75 mm (simplified)"

153

params = { kind = "guide", board = "2.4", length = 75 }

154

aliases = ["card guide 2.4 mm board 75", "board guide rail 75 mm", "PCB guide 2.4x75"]

155

standard = "step.parts card guide model"

156

157

[[presets]]

158

id = "guide-2.4-100"

159

title = "PCB card guide, 2.4 mm board, 100 mm (simplified)"

160

params = { kind = "guide", board = "2.4", length = 100 }

161

aliases = ["card guide 2.4 mm board 100", "board guide rail 100 mm", "PCB guide 2.4x100"]

162

standard = "step.parts card guide model"

163

164

[[presets]]

165

id = "guide-2.4-150"

166

title = "PCB card guide, 2.4 mm board, 150 mm (simplified)"

167

params = { kind = "guide", board = "2.4", length = 150 }

168

aliases = ["card guide 2.4 mm board 150", "board guide rail 150 mm", "PCB guide 2.4x150"]

169

standard = "step.parts card guide model"

170

171

[[presets]]

172

id = "guide-2.4-200"

173

title = "PCB card guide, 2.4 mm board, 200 mm (simplified)"

174

params = { kind = "guide", board = "2.4", length = 200 }

175

aliases = ["card guide 2.4 mm board 200", "board guide rail 200 mm", "PCB guide 2.4x200"]

176

standard = "step.parts card guide model"

177

178

[[presets]]

179

id = "retain-clip-1-50"

180

title = "PCB retaining clip, 1 mm board, 50 mm (simplified)"

181

params = { kind = "retain-clip", board = "1", length = 50 }

182

aliases = ["card guide 1 mm board 50", "board guide rail 50 mm", "PCB guide 1x50"]

183

standard = "step.parts card guide model"

184

185

[[presets]]

186

id = "retain-clip-1-75"

187

title = "PCB retaining clip, 1 mm board, 75 mm (simplified)"

188

params = { kind = "retain-clip", board = "1", length = 75 }

189

aliases = ["card guide 1 mm board 75", "board guide rail 75 mm", "PCB guide 1x75"]

190

standard = "step.parts card guide model"

191

192

[[presets]]

193

id = "retain-clip-1-100"

194

title = "PCB retaining clip, 1 mm board, 100 mm (simplified)"

195

params = { kind = "retain-clip", board = "1", length = 100 }

196

aliases = ["card guide 1 mm board 100", "board guide rail 100 mm", "PCB guide 1x100"]

197

standard = "step.parts card guide model"

198

199

[[presets]]

200

id = "retain-clip-1-150"

201

title = "PCB retaining clip, 1 mm board, 150 mm (simplified)"

202

params = { kind = "retain-clip", board = "1", length = 150 }

203

aliases = ["card guide 1 mm board 150", "board guide rail 150 mm", "PCB guide 1x150"]

204

standard = "step.parts card guide model"

205

206

[[presets]]

207

id = "retain-clip-1-200"

208

title = "PCB retaining clip, 1 mm board, 200 mm (simplified)"

209

params = { kind = "retain-clip", board = "1", length = 200 }

210

aliases = ["card guide 1 mm board 200", "board guide rail 200 mm", "PCB guide 1x200"]

211

standard = "step.parts card guide model"

212

213

[[presets]]

214

id = "retain-clip-1.2-50"

215

title = "PCB retaining clip, 1.2 mm board, 50 mm (simplified)"

216

params = { kind = "retain-clip", board = "1.2", length = 50 }

217

aliases = ["card guide 1.2 mm board 50", "board guide rail 50 mm", "PCB guide 1.2x50"]

218

standard = "step.parts card guide model"

219

220

[[presets]]

221

id = "retain-clip-1.2-75"

222

title = "PCB retaining clip, 1.2 mm board, 75 mm (simplified)"

223

params = { kind = "retain-clip", board = "1.2", length = 75 }

224

aliases = ["card guide 1.2 mm board 75", "board guide rail 75 mm", "PCB guide 1.2x75"]

225

standard = "step.parts card guide model"

226

227

[[presets]]

228

id = "retain-clip-1.2-100"

229

title = "PCB retaining clip, 1.2 mm board, 100 mm (simplified)"

230

params = { kind = "retain-clip", board = "1.2", length = 100 }

231

aliases = ["card guide 1.2 mm board 100", "board guide rail 100 mm", "PCB guide 1.2x100"]

232

standard = "step.parts card guide model"

233

234

[[presets]]

235

id = "retain-clip-1.2-150"

236

title = "PCB retaining clip, 1.2 mm board, 150 mm (simplified)"

237

params = { kind = "retain-clip", board = "1.2", length = 150 }

238

aliases = ["card guide 1.2 mm board 150", "board guide rail 150 mm", "PCB guide 1.2x150"]

239

standard = "step.parts card guide model"

240

241

[[presets]]

242

id = "retain-clip-1.2-200"

243

title = "PCB retaining clip, 1.2 mm board, 200 mm (simplified)"

244

params = { kind = "retain-clip", board = "1.2", length = 200 }

245

aliases = ["card guide 1.2 mm board 200", "board guide rail 200 mm", "PCB guide 1.2x200"]

246

standard = "step.parts card guide model"

247

248

[[presets]]

249

id = "retain-clip-1.6-50"

250

title = "PCB retaining clip, 1.6 mm board, 50 mm (simplified)"

251

params = { kind = "retain-clip", board = "1.6", length = 50 }

252

aliases = ["card guide 1.6 mm board 50", "board guide rail 50 mm", "PCB guide 1.6x50"]

253

standard = "step.parts card guide model"

254

255

[[presets]]

256

id = "retain-clip-1.6-75"

257

title = "PCB retaining clip, 1.6 mm board, 75 mm (simplified)"

258

params = { kind = "retain-clip", board = "1.6", length = 75 }

259

aliases = ["card guide 1.6 mm board 75", "board guide rail 75 mm", "PCB guide 1.6x75"]

260

standard = "step.parts card guide model"

261

262

[[presets]]

263

id = "retain-clip-1.6-100"

264

title = "PCB retaining clip, 1.6 mm board, 100 mm (simplified)"

265

params = { kind = "retain-clip", board = "1.6", length = 100 }

266

aliases = ["card guide 1.6 mm board 100", "board guide rail 100 mm", "PCB guide 1.6x100"]

267

standard = "step.parts card guide model"

268

269

[[presets]]

270

id = "retain-clip-1.6-150"

271

title = "PCB retaining clip, 1.6 mm board, 150 mm (simplified)"

272

params = { kind = "retain-clip", board = "1.6", length = 150 }

273

aliases = ["card guide 1.6 mm board 150", "board guide rail 150 mm", "PCB guide 1.6x150"]

274

standard = "step.parts card guide model"

275

276

[[presets]]

277

id = "retain-clip-1.6-200"

278

title = "PCB retaining clip, 1.6 mm board, 200 mm (simplified)"

279

params = { kind = "retain-clip", board = "1.6", length = 200 }

280

aliases = ["card guide 1.6 mm board 200", "board guide rail 200 mm", "PCB guide 1.6x200"]

281

standard = "step.parts card guide model"

282

283

[[presets]]

284

id = "retain-clip-2-50"

285

title = "PCB retaining clip, 2 mm board, 50 mm (simplified)"

286

params = { kind = "retain-clip", board = "2", length = 50 }

287

aliases = ["card guide 2 mm board 50", "board guide rail 50 mm", "PCB guide 2x50"]

288

standard = "step.parts card guide model"

289

290

[[presets]]

291

id = "retain-clip-2-75"

292

title = "PCB retaining clip, 2 mm board, 75 mm (simplified)"

293

params = { kind = "retain-clip", board = "2", length = 75 }

294

aliases = ["card guide 2 mm board 75", "board guide rail 75 mm", "PCB guide 2x75"]

295

standard = "step.parts card guide model"

296

297

[[presets]]

298

id = "retain-clip-2-100"

299

title = "PCB retaining clip, 2 mm board, 100 mm (simplified)"

300

params = { kind = "retain-clip", board = "2", length = 100 }

301

aliases = ["card guide 2 mm board 100", "board guide rail 100 mm", "PCB guide 2x100"]

302

standard = "step.parts card guide model"

303

304

[[presets]]

305

id = "retain-clip-2-150"

306

title = "PCB retaining clip, 2 mm board, 150 mm (simplified)"

307

params = { kind = "retain-clip", board = "2", length = 150 }

308

aliases = ["card guide 2 mm board 150", "board guide rail 150 mm", "PCB guide 2x150"]

309

standard = "step.parts card guide model"

310

311

[[presets]]

312

id = "retain-clip-2-200"

313

title = "PCB retaining clip, 2 mm board, 200 mm (simplified)"

314

params = { kind = "retain-clip", board = "2", length = 200 }

315

aliases = ["card guide 2 mm board 200", "board guide rail 200 mm", "PCB guide 2x200"]

316

standard = "step.parts card guide model"

317

318

[[presets]]

319

id = "retain-clip-2.4-50"

320

title = "PCB retaining clip, 2.4 mm board, 50 mm (simplified)"

321

params = { kind = "retain-clip", board = "2.4", length = 50 }

322

aliases = ["card guide 2.4 mm board 50", "board guide rail 50 mm", "PCB guide 2.4x50"]

323

standard = "step.parts card guide model"

324

325

[[presets]]

326

id = "retain-clip-2.4-75"

327

title = "PCB retaining clip, 2.4 mm board, 75 mm (simplified)"

328

params = { kind = "retain-clip", board = "2.4", length = 75 }

329

aliases = ["card guide 2.4 mm board 75", "board guide rail 75 mm", "PCB guide 2.4x75"]

330

standard = "step.parts card guide model"

331

332

[[presets]]

333

id = "retain-clip-2.4-100"

334

title = "PCB retaining clip, 2.4 mm board, 100 mm (simplified)"

335

params = { kind = "retain-clip", board = "2.4", length = 100 }

336

aliases = ["card guide 2.4 mm board 100", "board guide rail 100 mm", "PCB guide 2.4x100"]

337

standard = "step.parts card guide model"

338

339

[[presets]]

340

id = "retain-clip-2.4-150"

341

title = "PCB retaining clip, 2.4 mm board, 150 mm (simplified)"

342

params = { kind = "retain-clip", board = "2.4", length = 150 }

343

aliases = ["card guide 2.4 mm board 150", "board guide rail 150 mm", "PCB guide 2.4x150"]

344

standard = "step.parts card guide model"

345

346

[[presets]]

347

id = "retain-clip-2.4-200"

348

title = "PCB retaining clip, 2.4 mm board, 200 mm (simplified)"

349

params = { kind = "retain-clip", board = "2.4", length = 200 }

350

aliases = ["card guide 2.4 mm board 200", "board guide rail 200 mm", "PCB guide 2.4x200"]

351

standard = "step.parts card guide model"

352

# Presets of this part (factory/PRESETS.md). Written by factory/gen.py.

[[presets]]
id = "guide-1-50"
title = "PCB card guide, 1 mm board, 50 mm (simplified)"
params = { kind = "guide", board = "1", length = 50 }
aliases = ["card guide 1 mm board 50", "board guide rail 50 mm", "PCB guide 1x50"]
standard = "step.parts card guide model"

[[presets]]
id = "guide-1-75"
title = "PCB card guide, 1 mm board, 75 mm (simplified)"
params = { kind = "guide", board = "1", length = 75 }
aliases = ["card guide 1 mm board 75", "board guide rail 75 mm", "PCB guide 1x75"]
standard = "step.parts card guide model"

[[presets]]
id = "guide-1-100"
title = "PCB card guide, 1 mm board, 100 mm (simplified)"
params = { kind = "guide", board = "1", length = 100 }
aliases = ["card guide 1 mm board 100", "board guide rail 100 mm", "PCB guide 1x100"]
standard = "step.parts card guide model"

[[presets]]
id = "guide-1-150"
title = "PCB card guide, 1 mm board, 150 mm (simplified)"
params = { kind = "guide", board = "1", length = 150 }
aliases = ["card guide 1 mm board 150", "board guide rail 150 mm", "PCB guide 1x150"]
standard = "step.parts card guide model"

[[presets]]
id = "guide-1-200"
title = "PCB card guide, 1 mm board, 200 mm (simplified)"
params = { kind = "guide", board = "1", length = 200 }
aliases = ["card guide 1 mm board 200", "board guide rail 200 mm", "PCB guide 1x200"]
standard = "step.parts card guide model"

[[presets]]
id = "guide-1.2-50"
title = "PCB card guide, 1.2 mm board, 50 mm (simplified)"
params = { kind = "guide", board = "1.2", length = 50 }
aliases = ["card guide 1.2 mm board 50", "board guide rail 50 mm", "PCB guide 1.2x50"]
standard = "step.parts card guide model"

[[presets]]
id = "guide-1.2-75"
title = "PCB card guide, 1.2 mm board, 75 mm (simplified)"
params = { kind = "guide", board = "1.2", length = 75 }
aliases = ["card guide 1.2 mm board 75", "board guide rail 75 mm", "PCB guide 1.2x75"]
standard = "step.parts card guide model"

[[presets]]
id = "guide-1.2-100"
title = "PCB card guide, 1.2 mm board, 100 mm (simplified)"
params = { kind = "guide", board = "1.2", length = 100 }
aliases = ["card guide 1.2 mm board 100", "board guide rail 100 mm", "PCB guide 1.2x100"]
standard = "step.parts card guide model"

[[presets]]
id = "guide-1.2-150"
title = "PCB card guide, 1.2 mm board, 150 mm (simplified)"
params = { kind = "guide", board = "1.2", length = 150 }
aliases = ["card guide 1.2 mm board 150", "board guide rail 150 mm", "PCB guide 1.2x150"]
standard = "step.parts card guide model"

[[presets]]
id = "guide-1.2-200"
title = "PCB card guide, 1.2 mm board, 200 mm (simplified)"
params = { kind = "guide", board = "1.2", length = 200 }
aliases = ["card guide 1.2 mm board 200", "board guide rail 200 mm", "PCB guide 1.2x200"]
standard = "step.parts card guide model"

[[presets]]
id = "guide-1.6-50"
title = "PCB card guide, 1.6 mm board, 50 mm (simplified)"
params = { kind = "guide", board = "1.6", length = 50 }
aliases = ["card guide 1.6 mm board 50", "board guide rail 50 mm", "PCB guide 1.6x50"]
standard = "step.parts card guide model"

[[presets]]
id = "guide-1.6-75"
title = "PCB card guide, 1.6 mm board, 75 mm (simplified)"
params = { kind = "guide", board = "1.6", length = 75 }
aliases = ["card guide 1.6 mm board 75", "board guide rail 75 mm", "PCB guide 1.6x75"]
standard = "step.parts card guide model"

[[presets]]
id = "guide-1.6-100"
title = "PCB card guide, 1.6 mm board, 100 mm (simplified)"
params = { kind = "guide", board = "1.6", length = 100 }
aliases = ["card guide 1.6 mm board 100", "board guide rail 100 mm", "PCB guide 1.6x100"]
standard = "step.parts card guide model"

[[presets]]
id = "guide-1.6-150"
title = "PCB card guide, 1.6 mm board, 150 mm (simplified)"
params = { kind = "guide", board = "1.6", length = 150 }
aliases = ["card guide 1.6 mm board 150", "board guide rail 150 mm", "PCB guide 1.6x150"]
standard = "step.parts card guide model"

[[presets]]
id = "guide-1.6-200"
title = "PCB card guide, 1.6 mm board, 200 mm (simplified)"
params = { kind = "guide", board = "1.6", length = 200 }
aliases = ["card guide 1.6 mm board 200", "board guide rail 200 mm", "PCB guide 1.6x200"]
standard = "step.parts card guide model"

[[presets]]
id = "guide-2-50"
title = "PCB card guide, 2 mm board, 50 mm (simplified)"
params = { kind = "guide", board = "2", length = 50 }
aliases = ["card guide 2 mm board 50", "board guide rail 50 mm", "PCB guide 2x50"]
standard = "step.parts card guide model"

[[presets]]
id = "guide-2-75"
title = "PCB card guide, 2 mm board, 75 mm (simplified)"
params = { kind = "guide", board = "2", length = 75 }
aliases = ["card guide 2 mm board 75", "board guide rail 75 mm", "PCB guide 2x75"]
standard = "step.parts card guide model"

[[presets]]
id = "guide-2-100"
title = "PCB card guide, 2 mm board, 100 mm (simplified)"
params = { kind = "guide", board = "2", length = 100 }
aliases = ["card guide 2 mm board 100", "board guide rail 100 mm", "PCB guide 2x100"]
standard = "step.parts card guide model"

[[presets]]
id = "guide-2-150"
title = "PCB card guide, 2 mm board, 150 mm (simplified)"
params = { kind = "guide", board = "2", length = 150 }
aliases = ["card guide 2 mm board 150", "board guide rail 150 mm", "PCB guide 2x150"]
standard = "step.parts card guide model"

[[presets]]
id = "guide-2-200"
title = "PCB card guide, 2 mm board, 200 mm (simplified)"
params = { kind = "guide", board = "2", length = 200 }
aliases = ["card guide 2 mm board 200", "board guide rail 200 mm", "PCB guide 2x200"]
standard = "step.parts card guide model"

[[presets]]
id = "guide-2.4-50"
title = "PCB card guide, 2.4 mm board, 50 mm (simplified)"
params = { kind = "guide", board = "2.4", length = 50 }
aliases = ["card guide 2.4 mm board 50", "board guide rail 50 mm", "PCB guide 2.4x50"]
standard = "step.parts card guide model"

[[presets]]
id = "guide-2.4-75"
title = "PCB card guide, 2.4 mm board, 75 mm (simplified)"
params = { kind = "guide", board = "2.4", length = 75 }
aliases = ["card guide 2.4 mm board 75", "board guide rail 75 mm", "PCB guide 2.4x75"]
standard = "step.parts card guide model"

[[presets]]
id = "guide-2.4-100"
title = "PCB card guide, 2.4 mm board, 100 mm (simplified)"
params = { kind = "guide", board = "2.4", length = 100 }
aliases = ["card guide 2.4 mm board 100", "board guide rail 100 mm", "PCB guide 2.4x100"]
standard = "step.parts card guide model"

[[presets]]
id = "guide-2.4-150"
title = "PCB card guide, 2.4 mm board, 150 mm (simplified)"
params = { kind = "guide", board = "2.4", length = 150 }
aliases = ["card guide 2.4 mm board 150", "board guide rail 150 mm", "PCB guide 2.4x150"]
standard = "step.parts card guide model"

[[presets]]
id = "guide-2.4-200"
title = "PCB card guide, 2.4 mm board, 200 mm (simplified)"
params = { kind = "guide", board = "2.4", length = 200 }
aliases = ["card guide 2.4 mm board 200", "board guide rail 200 mm", "PCB guide 2.4x200"]
standard = "step.parts card guide model"

[[presets]]
id = "retain-clip-1-50"
title = "PCB retaining clip, 1 mm board, 50 mm (simplified)"
params = { kind = "retain-clip", board = "1", length = 50 }
aliases = ["card guide 1 mm board 50", "board guide rail 50 mm", "PCB guide 1x50"]
standard = "step.parts card guide model"

[[presets]]
id = "retain-clip-1-75"
title = "PCB retaining clip, 1 mm board, 75 mm (simplified)"
params = { kind = "retain-clip", board = "1", length = 75 }
aliases = ["card guide 1 mm board 75", "board guide rail 75 mm", "PCB guide 1x75"]
standard = "step.parts card guide model"

[[presets]]
id = "retain-clip-1-100"
title = "PCB retaining clip, 1 mm board, 100 mm (simplified)"
params = { kind = "retain-clip", board = "1", length = 100 }
aliases = ["card guide 1 mm board 100", "board guide rail 100 mm", "PCB guide 1x100"]
standard = "step.parts card guide model"

[[presets]]
id = "retain-clip-1-150"
title = "PCB retaining clip, 1 mm board, 150 mm (simplified)"
params = { kind = "retain-clip", board = "1", length = 150 }
aliases = ["card guide 1 mm board 150", "board guide rail 150 mm", "PCB guide 1x150"]
standard = "step.parts card guide model"

[[presets]]
id = "retain-clip-1-200"
title = "PCB retaining clip, 1 mm board, 200 mm (simplified)"
params = { kind = "retain-clip", board = "1", length = 200 }
aliases = ["card guide 1 mm board 200", "board guide rail 200 mm", "PCB guide 1x200"]
standard = "step.parts card guide model"

[[presets]]
id = "retain-clip-1.2-50"
title = "PCB retaining clip, 1.2 mm board, 50 mm (simplified)"
params = { kind = "retain-clip", board = "1.2", length = 50 }
aliases = ["card guide 1.2 mm board 50", "board guide rail 50 mm", "PCB guide 1.2x50"]
standard = "step.parts card guide model"

[[presets]]
id = "retain-clip-1.2-75"
title = "PCB retaining clip, 1.2 mm board, 75 mm (simplified)"
params = { kind = "retain-clip", board = "1.2", length = 75 }
aliases = ["card guide 1.2 mm board 75", "board guide rail 75 mm", "PCB guide 1.2x75"]
standard = "step.parts card guide model"

[[presets]]
id = "retain-clip-1.2-100"
title = "PCB retaining clip, 1.2 mm board, 100 mm (simplified)"
params = { kind = "retain-clip", board = "1.2", length = 100 }
aliases = ["card guide 1.2 mm board 100", "board guide rail 100 mm", "PCB guide 1.2x100"]
standard = "step.parts card guide model"

[[presets]]
id = "retain-clip-1.2-150"
title = "PCB retaining clip, 1.2 mm board, 150 mm (simplified)"
params = { kind = "retain-clip", board = "1.2", length = 150 }
aliases = ["card guide 1.2 mm board 150", "board guide rail 150 mm", "PCB guide 1.2x150"]
standard = "step.parts card guide model"

[[presets]]
id = "retain-clip-1.2-200"
title = "PCB retaining clip, 1.2 mm board, 200 mm (simplified)"
params = { kind = "retain-clip", board = "1.2", length = 200 }
aliases = ["card guide 1.2 mm board 200", "board guide rail 200 mm", "PCB guide 1.2x200"]
standard = "step.parts card guide model"

[[presets]]
id = "retain-clip-1.6-50"
title = "PCB retaining clip, 1.6 mm board, 50 mm (simplified)"
params = { kind = "retain-clip", board = "1.6", length = 50 }
aliases = ["card guide 1.6 mm board 50", "board guide rail 50 mm", "PCB guide 1.6x50"]
standard = "step.parts card guide model"

[[presets]]
id = "retain-clip-1.6-75"
title = "PCB retaining clip, 1.6 mm board, 75 mm (simplified)"
params = { kind = "retain-clip", board = "1.6", length = 75 }
aliases = ["card guide 1.6 mm board 75", "board guide rail 75 mm", "PCB guide 1.6x75"]
standard = "step.parts card guide model"

[[presets]]
id = "retain-clip-1.6-100"
title = "PCB retaining clip, 1.6 mm board, 100 mm (simplified)"
params = { kind = "retain-clip", board = "1.6", length = 100 }
aliases = ["card guide 1.6 mm board 100", "board guide rail 100 mm", "PCB guide 1.6x100"]
standard = "step.parts card guide model"

[[presets]]
id = "retain-clip-1.6-150"
title = "PCB retaining clip, 1.6 mm board, 150 mm (simplified)"
params = { kind = "retain-clip", board = "1.6", length = 150 }
aliases = ["card guide 1.6 mm board 150", "board guide rail 150 mm", "PCB guide 1.6x150"]
standard = "step.parts card guide model"

[[presets]]
id = "retain-clip-1.6-200"
title = "PCB retaining clip, 1.6 mm board, 200 mm (simplified)"
params = { kind = "retain-clip", board = "1.6", length = 200 }
aliases = ["card guide 1.6 mm board 200", "board guide rail 200 mm", "PCB guide 1.6x200"]
standard = "step.parts card guide model"

[[presets]]
id = "retain-clip-2-50"
title = "PCB retaining clip, 2 mm board, 50 mm (simplified)"
params = { kind = "retain-clip", board = "2", length = 50 }
aliases = ["card guide 2 mm board 50", "board guide rail 50 mm", "PCB guide 2x50"]
standard = "step.parts card guide model"

[[presets]]
id = "retain-clip-2-75"
title = "PCB retaining clip, 2 mm board, 75 mm (simplified)"
params = { kind = "retain-clip", board = "2", length = 75 }
aliases = ["card guide 2 mm board 75", "board guide rail 75 mm", "PCB guide 2x75"]
standard = "step.parts card guide model"

[[presets]]
id = "retain-clip-2-100"
title = "PCB retaining clip, 2 mm board, 100 mm (simplified)"
params = { kind = "retain-clip", board = "2", length = 100 }
aliases = ["card guide 2 mm board 100", "board guide rail 100 mm", "PCB guide 2x100"]
standard = "step.parts card guide model"

[[presets]]
id = "retain-clip-2-150"
title = "PCB retaining clip, 2 mm board, 150 mm (simplified)"
params = { kind = "retain-clip", board = "2", length = 150 }
aliases = ["card guide 2 mm board 150", "board guide rail 150 mm", "PCB guide 2x150"]
standard = "step.parts card guide model"

[[presets]]
id = "retain-clip-2-200"
title = "PCB retaining clip, 2 mm board, 200 mm (simplified)"
params = { kind = "retain-clip", board = "2", length = 200 }
aliases = ["card guide 2 mm board 200", "board guide rail 200 mm", "PCB guide 2x200"]
standard = "step.parts card guide model"

[[presets]]
id = "retain-clip-2.4-50"
title = "PCB retaining clip, 2.4 mm board, 50 mm (simplified)"
params = { kind = "retain-clip", board = "2.4", length = 50 }
aliases = ["card guide 2.4 mm board 50", "board guide rail 50 mm", "PCB guide 2.4x50"]
standard = "step.parts card guide model"

[[presets]]
id = "retain-clip-2.4-75"
title = "PCB retaining clip, 2.4 mm board, 75 mm (simplified)"
params = { kind = "retain-clip", board = "2.4", length = 75 }
aliases = ["card guide 2.4 mm board 75", "board guide rail 75 mm", "PCB guide 2.4x75"]
standard = "step.parts card guide model"

[[presets]]
id = "retain-clip-2.4-100"
title = "PCB retaining clip, 2.4 mm board, 100 mm (simplified)"
params = { kind = "retain-clip", board = "2.4", length = 100 }
aliases = ["card guide 2.4 mm board 100", "board guide rail 100 mm", "PCB guide 2.4x100"]
standard = "step.parts card guide model"

[[presets]]
id = "retain-clip-2.4-150"
title = "PCB retaining clip, 2.4 mm board, 150 mm (simplified)"
params = { kind = "retain-clip", board = "2.4", length = 150 }
aliases = ["card guide 2.4 mm board 150", "board guide rail 150 mm", "PCB guide 2.4x150"]
standard = "step.parts card guide model"

[[presets]]
id = "retain-clip-2.4-200"
title = "PCB retaining clip, 2.4 mm board, 200 mm (simplified)"
params = { kind = "retain-clip", board = "2.4", length = 200 }
aliases = ["card guide 2.4 mm board 200", "board guide rail 200 mm", "PCB guide 2.4x200"]
standard = "step.parts card guide model"

README.md 42 lines · Markdown

Download

PCB card guide (simplified)

A simplified PCB card guide or board retaining clip for assemblies, boards 1 to 2.4 mm thick, any length.

Geometry

An 8 mm wide, 6 mm high bar along X, centred on the origin, its base on the XY plane, with a board slot along its top from 1.8 mm above the base, as wide as the board plus 0.3 mm:

guide: the slot runs the full length;
retain-clip: the slot stops 1 mm short of the +X end, where an end lip (2 mm along X, from the slot floor up to 6.6 mm) stands, overhanging the end by 1 mm.

Board	1	1.2	1.6	2	2.4
Slot width	1.3	1.5	1.9	2.3	2.7

Parameters

Parameter	Meaning
`kind`	`guide` or `retain-clip`
`board`	board thickness, mm
`length`	mm (the clip's lip adds 1 mm)
`material`	`unspecified` (no material assigned), `nylon` (PA6), `pom`

Sources

No standard covers these generic guides and they name no maker. The geometry was measured from the published reference models below (every planar face read; the same body for every board and length), and every preset is checked against its own model: bounding box within 0.05 mm and volume within 2 %.

step.parts, pcb_card_guide_board<t>mm_l<length> and pcb_board_retain_clip_board<t>mm_l<length> (https://www.step.parts, repository https://github.com/earthtojake/step.parts, commit c6113328, catalog/step/): step.parts' own "analytic simplified" models, original project material under the repository's MIT licence (© 2026 earthtojake). They name no material, so the presets have material = "unspecified".

Simplifications (the models'): square-edged bar, no lead-in chamfer at the slot, no mounting holes or snap pegs, the clip's lip a plain block.

Preset list: from the step.parts catalogue (MIT), see library/NOTICE.md.

# PCB card guide (simplified)

A simplified PCB card guide or board retaining clip for assemblies, boards 1 to 2.4 mm thick, any length.

## Geometry

An 8 mm wide, 6 mm high bar along X, centred on the origin, its base on the XY plane, with a board slot along its
top from 1.8 mm above the base, as wide as the board plus 0.3 mm:

- **guide**: the slot runs the full length;
- **retain-clip**: the slot stops 1 mm short of the +X end, where an end lip (2 mm along X, from the slot floor up to
  6.6 mm) stands, overhanging the end by 1 mm.

| Board | 1 | 1.2 | 1.6 | 2 | 2.4 |
|---|---|---|---|---|---|
| Slot width | 1.3 | 1.5 | 1.9 | 2.3 | 2.7 |

## Parameters

| Parameter | Meaning |
|---|---|
| `kind` | `guide` or `retain-clip` |
| `board` | board thickness, mm |
| `length` | mm (the clip's lip adds 1 mm) |
| `material` | `unspecified` (no material assigned), `nylon` (PA6), `pom` |

## Sources

No standard covers these generic guides and they name no maker. **The geometry was measured from the published
reference models** below (every planar face read; the same body for every board and length), and every preset is
checked against its own model: bounding box within 0.05 mm and volume within 2 %.

- **step.parts**, `pcb_card_guide_board<t>mm_l<length>` and `pcb_board_retain_clip_board<t>mm_l<length>`
  (https://www.step.parts, repository https://github.com/earthtojake/step.parts, commit c6113328, `catalog/step/`):
  step.parts' own "analytic simplified" models, original project material under the repository's **MIT** licence
  (© 2026 earthtojake). They name no material, so the presets have `material = "unspecified"`.

Simplifications (the models'): square-edged bar, no lead-in chamfer at the slot, no mounting holes or snap pegs, the
clip's lip a plain block.

Preset list: from the step.parts catalogue (MIT), see `library/NOTICE.md`.

Use this part

STEVE

Open in STEVE

Open it in STEVE The STEVE runtime runs in STEVE: open the part there, or download the code and bundle.

Get the code

curl -o part.py "https://pythonparts.org/p/steve/pcb-card-guide/v/1.0.0/raw/part.py"

Raw files, bundle and API

curl "https://pythonparts.org/api/v1/parts/steve/pcb-card-guide/1.0.0"

The version's JSON (parameters, presets, files); add /build?name=value for a build at other values.

About this part

steve58 parts

Profile

License: MIT

Permissive: use, change and sell it; keep the copyright notice.

Runtime: STEVE
Built with: CadQuery 2.9.0.dev0
Published: Nov 1, 2026
Downloads: 0
Builds: 0
Stars: 0
Bundle: 897d4917c40e…

#pcb #card-guide #board-guide #electronics #enclosure #metric

Checks

PassedImports: steve

Every published part passes our checks before it’s listed. It is still code: read it before you use it.

Request a removal A copyright notice, or a trademark, confidential design, safety, malicious code or other problem. Report an illegal or prohibited item

A simplified PCB card guide for assemblies: an 8 x 6 mm bar with a board slot along its top (slot = board thickness + 0.3 mm), or a board retaining clip (the slot stopping short of one end, with an end lip). Boards 1, 1.2, 1.6, 2 and 2.4 mm thick, any length. Measured from step.parts' published models (MIT); no standard or maker drawing covers these generic guides. Along X, centred on the origin, base on the XY plane. Dimensions and attribution: see the README.

PCB card guide (simplified)

A simplified PCB card guide or board retaining clip for assemblies, boards 1 to 2.4 mm thick, any length.

Geometry

An 8 mm wide, 6 mm high bar along X, centred on the origin, its base on the XY plane, with a board slot along its top from 1.8 mm above the base, as wide as the board plus 0.3 mm:

guide: the slot runs the full length;
retain-clip: the slot stops 1 mm short of the +X end, where an end lip (2 mm along X, from the slot floor up to 6.6 mm) stands, overhanging the end by 1 mm.

Board	1	1.2	1.6	2	2.4
Slot width	1.3	1.5	1.9	2.3	2.7

Parameters

Parameter	Meaning
`kind`	`guide` or `retain-clip`
`board`	board thickness, mm
`length`	mm (the clip's lip adds 1 mm)
`material`	`unspecified` (no material assigned), `nylon` (PA6), `pom`

Sources

step.parts, pcb_card_guide_board<t>mm_l<length> and pcb_board_retain_clip_board<t>mm_l<length> (https://www.step.parts, repository https://github.com/earthtojake/step.parts, commit c6113328, catalog/step/): step.parts' own "analytic simplified" models, original project material under the repository's MIT licence (© 2026 earthtojake). They name no material, so the presets have material = "unspecified".

Simplifications (the models'): square-edged bar, no lead-in chamfer at the slot, no mounting holes or snap pegs, the clip's lip a plain block.

Preset list: from the step.parts catalogue (MIT), see library/NOTICE.md.

1.0.0 Latest Nov 1, 2026 · 1 day ago

More #pcb

STEVEMIT

steve/smt-spacer

Würth Elektronik SMT steel spacers: WA-SMSI, WA-SMST, WA-SMSE and WA-SMSR, any length.

0 179 sizes 0 1 day ago v1.0.0

STEVEMIT

steve/round-spacer

Round unthreaded clearance spacer for M3 screws (Harwin R30-601): Ø4.76 × Ø3.30, any length.

0 9 sizes 0 1 day ago v1.0.0

STEVEMIT

steve/pcb-support

PCB support post (snap-in, adhesive-backed, swage, press-fit), M2 to M4, any height: simplified, measured from step.parts' models.

0 128 sizes 0 1 day ago v1.0.0

STEVEMIT

steve/hex-standoff

Hex standoffs M2 to M4, female/female and male/female: Würth WA-SBRII/SBRIE (M2), Harwin R25/R30/R40 (M2.5 to M4).

0 69 sizes 0 1 day ago v1.0.0

steve/pcb-card-guide

PCB card guide (simplified)

Geometry

Parameters

Sources

PCB card guide (simplified)

Geometry

Parameters

Sources

Related parts

steve/smt-spacer

steve/round-spacer

steve/pcb-support

steve/hex-standoff