STEVEMIT
steve/i-beam
Hot-rolled I and H beams: IPE (DIN 1025-5), HEA (DIN 1025-3) and HEB (DIN 1025-2), any length.
steve/hollow-section
Square and rectangular hollow sections (structural tube), EN 10219-2, any size, wall and length.
Isometric
Section analysis
Plane normal
Offset
| 1 | """Square and rectangular hollow section (cold-formed structural tube), EN 10219-2, any size, wall and length. |
| 2 | |
| 3 | Section: outside `width` (X) by `height` (Y) with wall thickness `wall`, centred on the origin, extruded along +Z by |
| 4 | `length`. Corner radii as EN 10219-2 uses them for the sectional properties of its tables: outside ro and inside ri |
| 5 | = 2.0T / 1.0T for T <= 6 mm, 2.5T / 1.5T for 6 < T <= 10 mm, 3.0T / 2.0T for T > 10 mm; or sharp corners (`corners = |
| 6 | "sharp"`), the generic light tubes as step.parts' published models draw them (see the README). |
| 7 | """ |
| 8 | from steve import Model |
| 9 | |
| 10 | width = 40 # mm Outside width B |
| 11 | height = 40 # mm Outside height H |
| 12 | wall = 3 # mm Wall thickness T |
| 13 | length = 1000 # mm Length |
| 14 | material = "steel-s355" # Material |
| 15 | corners = "en-10219" # Corners: en-10219 (EN 10219-2 radii) or sharp |
| 16 | |
| 17 | # material choice: (STEVE material library id, appearance colour) |
| 18 | MATERIALS = { |
| 19 | "steel-s355": ("steel-s355j2g3", "#7d8085"), # EN 10219-1 S355J2H (closest library grade S355J2G3) |
| 20 | "steel-s235": ("steel-s235jr", "#7d8085"), # EN 10219-1 S235JRH |
| 21 | "stainless-304": ("stainless-304", "#c9ccd0"), # EN 10088 1.4301 |
| 22 | "unspecified": (None, "#9a9da2"), # the generic tubes' models name no material |
| 23 | } |
| 24 | # EN 10219-2:2006 Annex B clause B.3 (https://icdn.tradew.com/file/201801/1572618/pdf/6800507.pdf) corner radii for the sectional properties: (up to wall thickness T, ro / T, ri / T) |
| 25 | CORNERS = [(6.0, 2.0, 1.0), (10.0, 2.5, 1.5), (1000.0, 3.0, 2.0)] |
| 26 | |
| 27 | ro_factor, ri_factor = next((o, i) for limit, o, i in CORNERS if wall <= limit) |
| 28 | ro = ro_factor * wall if corners == "en-10219" else 0.0 |
| 29 | ri = ri_factor * wall if corners == "en-10219" else 0.0 |
| 30 | material_id, colour = MATERIALS[material] |
| 31 | |
| 32 | |
| 33 | def rounded_rectangle(sk, id, w, h, r): |
| 34 | """A w x h rectangle centred on the origin with corner radius r: four lines and four quarter arcs (r = 0: sharp).""" |
| 35 | x, y = w / 2, h / 2 |
| 36 | if r == 0: |
| 37 | sk.rect(id, (-x, -y), (x, y)) |
| 38 | return |
| 39 | sk.line(f"{id}_bottom", (-x + r, -y), (x - r, -y)) |
| 40 | sk.arc(f"{id}_corner1", (x - r, -y + r), r, 270, 360) |
| 41 | sk.line(f"{id}_right", (x, -y + r), (x, y - r)) |
| 42 | sk.arc(f"{id}_corner2", (x - r, y - r), r, 0, 90) |
| 43 | sk.line(f"{id}_top", (x - r, y), (-x + r, y)) |
| 44 | sk.arc(f"{id}_corner3", (-x + r, y - r), r, 90, 180) |
| 45 | sk.line(f"{id}_left", (-x, y - r), (-x, -y + r)) |
| 46 | sk.arc(f"{id}_corner4", (-x + r, -y + r), r, 180, 270) |
| 47 | |
| 48 | |
| 49 | model = Model() |
| 50 | with model.sketch("section", on="XY", name="Section") as sk: |
| 51 | rounded_rectangle(sk, "outside", width, height, ro) |
| 52 | rounded_rectangle(sk, "inside", width - 2 * wall, height - 2 * wall, ri) |
| 53 | model.extrude("tube", "section", distance=length, name="Tube") |
| 54 | if material_id: # "unspecified": no material assigned |
| 55 | model.material(material_id, color=colour) |
| 56 | result = model.result() |
| 57 |
| 1 | name = "steve/hollow-section" |
| 2 | version = "1.1.0" |
| 3 | runtime = "steve" |
| 4 | license = "MIT" |
| 5 | summary = "Square and rectangular hollow sections (structural tube), EN 10219-2, any size, wall and length." |
| 6 | description = """Cold-formed square or rectangular hollow section to EN 10219-2: outside width B along X, height H \ |
| 7 | along Y, wall thickness T, centred on the origin and extruded along +Z by the length. |
| 8 | |
| 9 | Corner radii are those EN 10219-2 uses for the sectional properties of its tables (outside / inside: 2T / T up to \ |
| 10 | 6 mm wall, 2.5T / 1.5T up to 10 mm, 3T / 2T above), so mass and section area match the tables. Presets: catalogue \ |
| 11 | sizes, 1000 mm long. Also sharp-cornered light tubes (corners = "sharp"): the catalogue's generic square and \ |
| 12 | rectangular tubes, measured from step.parts' published models (MIT).""" |
| 13 | changes = "Sharp corners (corners = sharp) and an unspecified material added for the generic light tubes 10x10x1 to 60x30x2.4, measured from step.parts' models (MIT); EN 10219 presets unchanged." |
| 14 | tags = ["stock", "tube", "hollow-section", "shs", "rhs", "en-10219", "structural", "metric"] |
| 15 | |
| 16 | [parameters.width] |
| 17 | type = "number" |
| 18 | default = 40 |
| 19 | min = 10 |
| 20 | max = 600 |
| 21 | unit = "mm" |
| 22 | label = "Width B" |
| 23 | |
| 24 | [parameters.height] |
| 25 | type = "number" |
| 26 | default = 40 |
| 27 | min = 10 |
| 28 | max = 600 |
| 29 | unit = "mm" |
| 30 | label = "Height H" |
| 31 | |
| 32 | [parameters.wall] |
| 33 | type = "number" |
| 34 | default = 3 |
| 35 | min = 0.5 |
| 36 | max = 40 |
| 37 | unit = "mm" |
| 38 | label = "Wall thickness T" |
| 39 | description = "Must leave an opening: 2 x wall < width and height." |
| 40 | |
| 41 | [parameters.length] |
| 42 | type = "number" |
| 43 | default = 1000 |
| 44 | min = 1 |
| 45 | max = 12000 |
| 46 | unit = "mm" |
| 47 | label = "Length" |
| 48 | |
| 49 | [parameters.material] |
| 50 | type = "choice" |
| 51 | default = "steel-s355" |
| 52 | choices = ["steel-s355", "steel-s235", "stainless-304", "unspecified"] |
| 53 | label = "Material" |
| 54 | description = "S355J2H or S235JRH structural steel (EN 10219-1), 1.4301 stainless, or unspecified (no material assigned)." |
| 55 | |
| 56 | [parameters.corners] |
| 57 | type = "choice" |
| 58 | default = "en-10219" |
| 59 | choices = ["en-10219", "sharp"] |
| 60 | label = "Corners" |
| 61 | description = "en-10219: the corner radii EN 10219-2 uses for its tables; sharp: square corners (the generic light tubes)." |
| 62 |
| 1 | # Presets of this part (factory/PRESETS.md). Written by factory/gen.py. |
| 2 | |
| 3 | [[presets]] |
| 4 | id = "SHS-20x20x2" |
| 5 | title = "SHS 20 × 20 × 2 (EN 10219), 1000 mm" |
| 6 | params = { width = 20, height = 20, wall = 2, length = 1000 } |
| 7 | aliases = ["EN 10219 20x20x2", "SHS 20x20x2", "square hollow section 20 x 20 x 2", "EN10219 20x20x2"] |
| 8 | standard = "EN 10219" |
| 9 | |
| 10 | [[presets]] |
| 11 | id = "SHS-25x25x2-100" |
| 12 | title = "SHS 25 × 25 × 2 (EN 10219), 100 mm" |
| 13 | params = { width = 25, height = 25, wall = 2, length = 100 } |
| 14 | aliases = ["EN 10219 25x25x2 x 100", "square tube 25 x 25 x 2, 100 mm"] |
| 15 | standard = "EN 10219" |
| 16 | |
| 17 | [[presets]] |
| 18 | id = "SHS-25x25x2-150" |
| 19 | title = "SHS 25 × 25 × 2 (EN 10219), 150 mm" |
| 20 | params = { width = 25, height = 25, wall = 2, length = 150 } |
| 21 | aliases = ["EN 10219 25x25x2 x 150", "square tube 25 x 25 x 2, 150 mm"] |
| 22 | standard = "EN 10219" |
| 23 | |
| 24 | [[presets]] |
| 25 | id = "SHS-25x25x2-200" |
| 26 | title = "SHS 25 × 25 × 2 (EN 10219), 200 mm" |
| 27 | params = { width = 25, height = 25, wall = 2, length = 200 } |
| 28 | aliases = ["EN 10219 25x25x2 x 200", "square tube 25 x 25 x 2, 200 mm"] |
| 29 | standard = "EN 10219" |
| 30 | |
| 31 | [[presets]] |
| 32 | id = "SHS-25x25x2-250" |
| 33 | title = "SHS 25 × 25 × 2 (EN 10219), 250 mm" |
| 34 | params = { width = 25, height = 25, wall = 2, length = 250 } |
| 35 | aliases = ["EN 10219 25x25x2 x 250", "square tube 25 x 25 x 2, 250 mm"] |
| 36 | standard = "EN 10219" |
| 37 | |
| 38 | [[presets]] |
| 39 | id = "SHS-25x25x2-300" |
| 40 | title = "SHS 25 × 25 × 2 (EN 10219), 300 mm" |
| 41 | params = { width = 25, height = 25, wall = 2, length = 300 } |
| 42 | aliases = ["EN 10219 25x25x2 x 300", "square tube 25 x 25 x 2, 300 mm"] |
| 43 | standard = "EN 10219" |
| 44 | |
| 45 | [[presets]] |
| 46 | id = "SHS-25x25x2-400" |
| 47 | title = "SHS 25 × 25 × 2 (EN 10219), 400 mm" |
| 48 | params = { width = 25, height = 25, wall = 2, length = 400 } |
| 49 | aliases = ["EN 10219 25x25x2 x 400", "square tube 25 x 25 x 2, 400 mm"] |
| 50 | standard = "EN 10219" |
| 51 | |
| 52 | [[presets]] |
| 53 | id = "SHS-25x25x2-500" |
| 54 | title = "SHS 25 × 25 × 2 (EN 10219), 500 mm" |
| 55 | params = { width = 25, height = 25, wall = 2, length = 500 } |
| 56 | aliases = ["EN 10219 25x25x2 x 500", "square tube 25 x 25 x 2, 500 mm"] |
| 57 | standard = "EN 10219" |
| 58 | |
| 59 | [[presets]] |
| 60 | id = "SHS-25x25x2-600" |
| 61 | title = "SHS 25 × 25 × 2 (EN 10219), 600 mm" |
| 62 | params = { width = 25, height = 25, wall = 2, length = 600 } |
| 63 | aliases = ["EN 10219 25x25x2 x 600", "square tube 25 x 25 x 2, 600 mm"] |
| 64 | standard = "EN 10219" |
| 65 | |
| 66 | [[presets]] |
| 67 | id = "SHS-25x25x2-750" |
| 68 | title = "SHS 25 × 25 × 2 (EN 10219), 750 mm" |
| 69 | params = { width = 25, height = 25, wall = 2, length = 750 } |
| 70 | aliases = ["EN 10219 25x25x2 x 750", "square tube 25 x 25 x 2, 750 mm"] |
| 71 | standard = "EN 10219" |
| 72 | |
| 73 | [[presets]] |
| 74 | id = "SHS-25x25x2" |
| 75 | title = "SHS 25 × 25 × 2 (EN 10219), 1000 mm" |
| 76 | params = { width = 25, height = 25, wall = 2, length = 1000 } |
| 77 | aliases = ["EN 10219 25x25x2", "SHS 25x25x2", "square hollow section 25 x 25 x 2", "EN10219 25x25x2", "SHS 25 × 25 × 2 (EN 10219), 1000 mm", "EN 10219 25x25x2 x 1000", "square tube 25 x 25 x 2, 1000 mm"] |
| 78 | standard = "EN 10219" |
| 79 | |
| 80 | [[presets]] |
| 81 | id = "SHS-25x25x3" |
| 82 | title = "SHS 25 × 25 × 3 (EN 10219), 1000 mm" |
| 83 | params = { width = 25, height = 25, wall = 3, length = 1000 } |
| 84 | aliases = ["EN 10219 25x25x3", "SHS 25x25x3", "square hollow section 25 x 25 x 3", "EN10219 25x25x3"] |
| 85 | standard = "EN 10219" |
| 86 | |
| 87 | [[presets]] |
| 88 | id = "SHS-30x30x2" |
| 89 | title = "SHS 30 × 30 × 2 (EN 10219), 1000 mm" |
| 90 | params = { width = 30, height = 30, wall = 2, length = 1000 } |
| 91 | aliases = ["EN 10219 30x30x2", "SHS 30x30x2", "square hollow section 30 x 30 x 2", "EN10219 30x30x2"] |
| 92 | standard = "EN 10219" |
| 93 | |
| 94 | [[presets]] |
| 95 | id = "SHS-30x30x3" |
| 96 | title = "SHS 30 × 30 × 3 (EN 10219), 1000 mm" |
| 97 | params = { width = 30, height = 30, wall = 3, length = 1000 } |
| 98 | aliases = ["EN 10219 30x30x3", "SHS 30x30x3", "square hollow section 30 x 30 x 3", "EN10219 30x30x3"] |
| 99 | standard = "EN 10219" |
| 100 | |
| 101 | [[presets]] |
| 102 | id = "SHS-40x40x3" |
| 103 | title = "SHS 40 × 40 × 3 (EN 10219), 1000 mm" |
| 104 | params = { width = 40, height = 40, wall = 3, length = 1000 } |
| 105 | aliases = ["EN 10219 40x40x3", "SHS 40x40x3", "square hollow section 40 x 40 x 3", "EN10219 40x40x3"] |
| 106 | standard = "EN 10219" |
| 107 | |
| 108 | [[presets]] |
| 109 | id = "SHS-40x40x4" |
| 110 | title = "SHS 40 × 40 × 4 (EN 10219), 1000 mm" |
| 111 | params = { width = 40, height = 40, wall = 4, length = 1000 } |
| 112 | aliases = ["EN 10219 40x40x4", "SHS 40x40x4", "square hollow section 40 x 40 x 4", "EN10219 40x40x4"] |
| 113 | standard = "EN 10219" |
| 114 | |
| 115 | [[presets]] |
| 116 | id = "SHS-50x50x3" |
| 117 | title = "SHS 50 × 50 × 3 (EN 10219), 1000 mm" |
| 118 | params = { width = 50, height = 50, wall = 3, length = 1000 } |
| 119 | aliases = ["EN 10219 50x50x3", "SHS 50x50x3", "square hollow section 50 x 50 x 3", "EN10219 50x50x3"] |
| 120 | standard = "EN 10219" |
| 121 | |
| 122 | [[presets]] |
| 123 | id = "SHS-50x50x4" |
| 124 | title = "SHS 50 × 50 × 4 (EN 10219), 1000 mm" |
| 125 | params = { width = 50, height = 50, wall = 4, length = 1000 } |
| 126 | aliases = ["EN 10219 50x50x4", "SHS 50x50x4", "square hollow section 50 x 50 x 4", "EN10219 50x50x4"] |
| 127 | standard = "EN 10219" |
| 128 | |
| 129 | [[presets]] |
| 130 | id = "SHS-60x60x3" |
| 131 | title = "SHS 60 × 60 × 3 (EN 10219), 1000 mm" |
| 132 | params = { width = 60, height = 60, wall = 3, length = 1000 } |
| 133 | aliases = ["EN 10219 60x60x3", "SHS 60x60x3", "square hollow section 60 x 60 x 3", "EN10219 60x60x3"] |
| 134 | standard = "EN 10219" |
| 135 | |
| 136 | [[presets]] |
| 137 | id = "SHS-60x60x4" |
| 138 | title = "SHS 60 × 60 × 4 (EN 10219), 1000 mm" |
| 139 | params = { width = 60, height = 60, wall = 4, length = 1000 } |
| 140 | aliases = ["EN 10219 60x60x4", "SHS 60x60x4", "square hollow section 60 x 60 x 4", "EN10219 60x60x4"] |
| 141 | standard = "EN 10219" |
| 142 | |
| 143 | [[presets]] |
| 144 | id = "SHS-60x60x5" |
| 145 | title = "SHS 60 × 60 × 5 (EN 10219), 1000 mm" |
| 146 | params = { width = 60, height = 60, wall = 5, length = 1000 } |
| 147 | aliases = ["EN 10219 60x60x5", "SHS 60x60x5", "square hollow section 60 x 60 x 5", "EN10219 60x60x5"] |
| 148 | standard = "EN 10219" |
| 149 | |
| 150 | [[presets]] |
| 151 | id = "SHS-60x60x6" |
| 152 | title = "SHS 60 × 60 × 6 (EN 10219), 1000 mm" |
| 153 | params = { width = 60, height = 60, wall = 6, length = 1000 } |
| 154 | aliases = ["EN 10219 60x60x6", "SHS 60x60x6", "square hollow section 60 x 60 x 6", "EN10219 60x60x6"] |
| 155 | standard = "EN 10219" |
| 156 | |
| 157 | [[presets]] |
| 158 | id = "SHS-70x70x3" |
| 159 | title = "SHS 70 × 70 × 3 (EN 10219), 1000 mm" |
| 160 | params = { width = 70, height = 70, wall = 3, length = 1000 } |
| 161 | aliases = ["EN 10219 70x70x3", "SHS 70x70x3", "square hollow section 70 x 70 x 3", "EN10219 70x70x3"] |
| 162 | standard = "EN 10219" |
| 163 | |
| 164 | [[presets]] |
| 165 | id = "SHS-70x70x4" |
| 166 | title = "SHS 70 × 70 × 4 (EN 10219), 1000 mm" |
| 167 | params = { width = 70, height = 70, wall = 4, length = 1000 } |
| 168 | aliases = ["EN 10219 70x70x4", "SHS 70x70x4", "square hollow section 70 x 70 x 4", "EN10219 70x70x4"] |
| 169 | standard = "EN 10219" |
| 170 | |
| 171 | [[presets]] |
| 172 | id = "SHS-70x70x5" |
| 173 | title = "SHS 70 × 70 × 5 (EN 10219), 1000 mm" |
| 174 | params = { width = 70, height = 70, wall = 5, length = 1000 } |
| 175 | aliases = ["EN 10219 70x70x5", "SHS 70x70x5", "square hollow section 70 x 70 x 5", "EN10219 70x70x5"] |
| 176 | standard = "EN 10219" |
| 177 | |
| 178 | [[presets]] |
| 179 | id = "SHS-70x70x6" |
| 180 | title = "SHS 70 × 70 × 6 (EN 10219), 1000 mm" |
| 181 | params = { width = 70, height = 70, wall = 6, length = 1000 } |
| 182 | aliases = ["EN 10219 70x70x6", "SHS 70x70x6", "square hollow section 70 x 70 x 6", "EN10219 70x70x6"] |
| 183 | standard = "EN 10219" |
| 184 | |
| 185 | [[presets]] |
| 186 | id = "SHS-80x80x3" |
| 187 | title = "SHS 80 × 80 × 3 (EN 10219), 1000 mm" |
| 188 | params = { width = 80, height = 80, wall = 3, length = 1000 } |
| 189 | aliases = ["EN 10219 80x80x3", "SHS 80x80x3", "square hollow section 80 x 80 x 3", "EN10219 80x80x3"] |
| 190 | standard = "EN 10219" |
| 191 | |
| 192 | [[presets]] |
| 193 | id = "SHS-80x80x4" |
| 194 | title = "SHS 80 × 80 × 4 (EN 10219), 1000 mm" |
| 195 | params = { width = 80, height = 80, wall = 4, length = 1000 } |
| 196 | aliases = ["EN 10219 80x80x4", "SHS 80x80x4", "square hollow section 80 x 80 x 4", "EN10219 80x80x4"] |
| 197 | standard = "EN 10219" |
| 198 | |
| 199 | [[presets]] |
| 200 | id = "SHS-80x80x5" |
| 201 | title = "SHS 80 × 80 × 5 (EN 10219), 1000 mm" |
| 202 | params = { width = 80, height = 80, wall = 5, length = 1000 } |
| 203 | aliases = ["EN 10219 80x80x5", "SHS 80x80x5", "square hollow section 80 x 80 x 5", "EN10219 80x80x5"] |
| 204 | standard = "EN 10219" |
| 205 | |
| 206 | [[presets]] |
| 207 | id = "SHS-80x80x6" |
| 208 | title = "SHS 80 × 80 × 6 (EN 10219), 1000 mm" |
| 209 | params = { width = 80, height = 80, wall = 6, length = 1000 } |
| 210 | aliases = ["EN 10219 80x80x6", "SHS 80x80x6", "square hollow section 80 x 80 x 6", "EN10219 80x80x6"] |
| 211 | standard = "EN 10219" |
| 212 | |
| 213 | [[presets]] |
| 214 | id = "SHS-90x90x5" |
| 215 | title = "SHS 90 × 90 × 5 (EN 10219), 1000 mm" |
| 216 | params = { width = 90, height = 90, wall = 5, length = 1000 } |
| 217 | aliases = ["EN 10219 90x90x5", "SHS 90x90x5", "square hollow section 90 x 90 x 5", "EN10219 90x90x5"] |
| 218 | standard = "EN 10219" |
| 219 | |
| 220 | [[presets]] |
| 221 | id = "SHS-90x90x6" |
| 222 | title = "SHS 90 × 90 × 6 (EN 10219), 1000 mm" |
| 223 | params = { width = 90, height = 90, wall = 6, length = 1000 } |
| 224 | aliases = ["EN 10219 90x90x6", "SHS 90x90x6", "square hollow section 90 x 90 x 6", "EN10219 90x90x6"] |
| 225 | standard = "EN 10219" |
| 226 | |
| 227 | [[presets]] |
| 228 | id = "SHS-100x100x4" |
| 229 | title = "SHS 100 × 100 × 4 (EN 10219), 1000 mm" |
| 230 | params = { width = 100, height = 100, wall = 4, length = 1000 } |
| 231 | aliases = ["EN 10219 100x100x4", "SHS 100x100x4", "square hollow section 100 x 100 x 4", "100 x 100 x 4 square tube", "EN10219 100x100x4"] |
| 232 | standard = "EN 10219" |
| 233 | |
| 234 | [[presets]] |
| 235 | id = "SHS-100x100x5" |
| 236 | title = "SHS 100 × 100 × 5 (EN 10219), 1000 mm" |
| 237 | params = { width = 100, height = 100, wall = 5, length = 1000 } |
| 238 | aliases = ["EN 10219 100x100x5", "SHS 100x100x5", "square hollow section 100 x 100 x 5", "EN10219 100x100x5"] |
| 239 | standard = "EN 10219" |
| 240 | |
| 241 | [[presets]] |
| 242 | id = "SHS-100x100x6" |
| 243 | title = "SHS 100 × 100 × 6 (EN 10219), 1000 mm" |
| 244 | params = { width = 100, height = 100, wall = 6, length = 1000 } |
| 245 | aliases = ["EN 10219 100x100x6", "SHS 100x100x6", "square hollow section 100 x 100 x 6", "100 x 100 x 6 square tube", "EN10219 100x100x6"] |
| 246 | standard = "EN 10219" |
| 247 | |
| 248 | [[presets]] |
| 249 | id = "SHS-120x120x4" |
| 250 | title = "SHS 120 × 120 × 4 (EN 10219), 1000 mm" |
| 251 | params = { width = 120, height = 120, wall = 4, length = 1000 } |
| 252 | aliases = ["EN 10219 120x120x4", "SHS 120x120x4", "square hollow section 120 x 120 x 4", "EN10219 120x120x4"] |
| 253 | standard = "EN 10219" |
| 254 | |
| 255 | [[presets]] |
| 256 | id = "SHS-120x120x5" |
| 257 | title = "SHS 120 × 120 × 5 (EN 10219), 1000 mm" |
| 258 | params = { width = 120, height = 120, wall = 5, length = 1000 } |
| 259 | aliases = ["EN 10219 120x120x5", "SHS 120x120x5", "square hollow section 120 x 120 x 5", "EN10219 120x120x5"] |
| 260 | standard = "EN 10219" |
| 261 | |
| 262 | [[presets]] |
| 263 | id = "SHS-120x120x6" |
| 264 | title = "SHS 120 × 120 × 6 (EN 10219), 1000 mm" |
| 265 | params = { width = 120, height = 120, wall = 6, length = 1000 } |
| 266 | aliases = ["EN 10219 120x120x6", "SHS 120x120x6", "square hollow section 120 x 120 x 6", "EN10219 120x120x6"] |
| 267 | standard = "EN 10219" |
| 268 | |
| 269 | [[presets]] |
| 270 | id = "SHS-120x120x6.3" |
| 271 | title = "SHS 120 × 120 × 6.3 (EN 10219), 1000 mm" |
| 272 | params = { width = 120, height = 120, wall = 6.3, length = 1000 } |
| 273 | aliases = ["EN 10219 120x120x6.3", "SHS 120x120x6.3", "square hollow section 120 x 120 x 6.3", "EN10219 120x120x6.3"] |
| 274 | standard = "EN 10219" |
| 275 | |
| 276 | [[presets]] |
| 277 | id = "SHS-120x120x8" |
| 278 | title = "SHS 120 × 120 × 8 (EN 10219), 1000 mm" |
| 279 | params = { width = 120, height = 120, wall = 8, length = 1000 } |
| 280 | aliases = ["EN 10219 120x120x8", "SHS 120x120x8", "square hollow section 120 x 120 x 8", "EN10219 120x120x8"] |
| 281 | standard = "EN 10219" |
| 282 | |
| 283 | [[presets]] |
| 284 | id = "SHS-120x120x10" |
| 285 | title = "SHS 120 × 120 × 10 (EN 10219), 1000 mm" |
| 286 | params = { width = 120, height = 120, wall = 10, length = 1000 } |
| 287 | aliases = ["EN 10219 120x120x10", "SHS 120x120x10", "square hollow section 120 x 120 x 10", "EN10219 120x120x10"] |
| 288 | standard = "EN 10219" |
| 289 | |
| 290 | [[presets]] |
| 291 | id = "SHS-120x120x12" |
| 292 | title = "SHS 120 × 120 × 12 (EN 10219), 1000 mm" |
| 293 | params = { width = 120, height = 120, wall = 12, length = 1000 } |
| 294 | aliases = ["EN 10219 120x120x12", "SHS 120x120x12", "square hollow section 120 x 120 x 12", "EN10219 120x120x12"] |
| 295 | standard = "EN 10219" |
| 296 | |
| 297 | [[presets]] |
| 298 | id = "SHS-120x120x12.5" |
| 299 | title = "SHS 120 × 120 × 12.5 (EN 10219), 1000 mm" |
| 300 | params = { width = 120, height = 120, wall = 12.5, length = 1000 } |
| 301 | aliases = ["EN 10219 120x120x12.5", "SHS 120x120x12.5", "square hollow section 120 x 120 x 12.5", "EN10219 120x120x12.5"] |
| 302 | standard = "EN 10219" |
| 303 | |
| 304 | [[presets]] |
| 305 | id = "SHS-140x140x5" |
| 306 | title = "SHS 140 × 140 × 5 (EN 10219), 1000 mm" |
| 307 | params = { width = 140, height = 140, wall = 5, length = 1000 } |
| 308 | aliases = ["EN 10219 140x140x5", "SHS 140x140x5", "square hollow section 140 x 140 x 5", "EN10219 140x140x5"] |
| 309 | standard = "EN 10219" |
| 310 | |
| 311 | [[presets]] |
| 312 | id = "SHS-140x140x6" |
| 313 | title = "SHS 140 × 140 × 6 (EN 10219), 1000 mm" |
| 314 | params = { width = 140, height = 140, wall = 6, length = 1000 } |
| 315 | aliases = ["EN 10219 140x140x6", "SHS 140x140x6", "square hollow section 140 x 140 x 6", "EN10219 140x140x6"] |
| 316 | standard = "EN 10219" |
| 317 | |
| 318 | [[presets]] |
| 319 | id = "SHS-140x140x6.3" |
| 320 | title = "SHS 140 × 140 × 6.3 (EN 10219), 1000 mm" |
| 321 | params = { width = 140, height = 140, wall = 6.3, length = 1000 } |
| 322 | aliases = ["EN 10219 140x140x6.3", "SHS 140x140x6.3", "square hollow section 140 x 140 x 6.3", "EN10219 140x140x6.3"] |
| 323 | standard = "EN 10219" |
| 324 | |
| 325 | [[presets]] |
| 326 | id = "SHS-140x140x8" |
| 327 | title = "SHS 140 × 140 × 8 (EN 10219), 1000 mm" |
| 328 | params = { width = 140, height = 140, wall = 8, length = 1000 } |
| 329 | aliases = ["EN 10219 140x140x8", "SHS 140x140x8", "square hollow section 140 x 140 x 8", "EN10219 140x140x8"] |
| 330 | standard = "EN 10219" |
| 331 | |
| 332 | [[presets]] |
| 333 | id = "SHS-140x140x10" |
| 334 | title = "SHS 140 × 140 × 10 (EN 10219), 1000 mm" |
| 335 | params = { width = 140, height = 140, wall = 10, length = 1000 } |
| 336 | aliases = ["EN 10219 140x140x10", "SHS 140x140x10", "square hollow section 140 x 140 x 10", "EN10219 140x140x10"] |
| 337 | standard = "EN 10219" |
| 338 | |
| 339 | [[presets]] |
| 340 | id = "SHS-140x140x12" |
| 341 | title = "SHS 140 × 140 × 12 (EN 10219), 1000 mm" |
| 342 | params = { width = 140, height = 140, wall = 12, length = 1000 } |
| 343 | aliases = ["EN 10219 140x140x12", "SHS 140x140x12", "square hollow section 140 x 140 x 12", "EN10219 140x140x12"] |
| 344 | standard = "EN 10219" |
| 345 | |
| 346 | [[presets]] |
| 347 | id = "SHS-140x140x12.5" |
| 348 | title = "SHS 140 × 140 × 12.5 (EN 10219), 1000 mm" |
| 349 | params = { width = 140, height = 140, wall = 12.5, length = 1000 } |
| 350 | aliases = ["EN 10219 140x140x12.5", "SHS 140x140x12.5", "square hollow section 140 x 140 x 12.5", "EN10219 140x140x12.5"] |
| 351 | standard = "EN 10219" |
| 352 | |
| 353 | [[presets]] |
| 354 | id = "SHS-150x150x5" |
| 355 | title = "SHS 150 × 150 × 5 (EN 10219), 1000 mm" |
| 356 | params = { width = 150, height = 150, wall = 5, length = 1000 } |
| 357 | aliases = ["EN 10219 150x150x5", "SHS 150x150x5", "square hollow section 150 x 150 x 5", "EN10219 150x150x5"] |
| 358 | standard = "EN 10219" |
| 359 | |
| 360 | [[presets]] |
| 361 | id = "SHS-150x150x6" |
| 362 | title = "SHS 150 × 150 × 6 (EN 10219), 1000 mm" |
| 363 | params = { width = 150, height = 150, wall = 6, length = 1000 } |
| 364 | aliases = ["EN 10219 150x150x6", "SHS 150x150x6", "square hollow section 150 x 150 x 6", "EN10219 150x150x6"] |
| 365 | standard = "EN 10219" |
| 366 | |
| 367 | [[presets]] |
| 368 | id = "SHS-150x150x6.3" |
| 369 | title = "SHS 150 × 150 × 6.3 (EN 10219), 1000 mm" |
| 370 | params = { width = 150, height = 150, wall = 6.3, length = 1000 } |
| 371 | aliases = ["EN 10219 150x150x6.3", "SHS 150x150x6.3", "square hollow section 150 x 150 x 6.3", "EN10219 150x150x6.3"] |
| 372 | standard = "EN 10219" |
| 373 | |
| 374 | [[presets]] |
| 375 | id = "SHS-150x150x8" |
| 376 | title = "SHS 150 × 150 × 8 (EN 10219), 1000 mm" |
| 377 | params = { width = 150, height = 150, wall = 8, length = 1000 } |
| 378 | aliases = ["EN 10219 150x150x8", "SHS 150x150x8", "square hollow section 150 x 150 x 8", "EN10219 150x150x8"] |
| 379 | standard = "EN 10219" |
| 380 | |
| 381 | [[presets]] |
| 382 | id = "SHS-150x150x10" |
| 383 | title = "SHS 150 × 150 × 10 (EN 10219), 1000 mm" |
| 384 | params = { width = 150, height = 150, wall = 10, length = 1000 } |
| 385 | aliases = ["EN 10219 150x150x10", "SHS 150x150x10", "square hollow section 150 x 150 x 10", "EN10219 150x150x10"] |
| 386 | standard = "EN 10219" |
| 387 | |
| 388 | [[presets]] |
| 389 | id = "SHS-150x150x12" |
| 390 | title = "SHS 150 × 150 × 12 (EN 10219), 1000 mm" |
| 391 | params = { width = 150, height = 150, wall = 12, length = 1000 } |
| 392 | aliases = ["EN 10219 150x150x12", "SHS 150x150x12", "square hollow section 150 x 150 x 12", "EN10219 150x150x12"] |
| 393 | standard = "EN 10219" |
| 394 | |
| 395 | [[presets]] |
| 396 | id = "SHS-150x150x12.5" |
| 397 | title = "SHS 150 × 150 × 12.5 (EN 10219), 1000 mm" |
| 398 | params = { width = 150, height = 150, wall = 12.5, length = 1000 } |
| 399 | aliases = ["EN 10219 150x150x12.5", "SHS 150x150x12.5", "square hollow section 150 x 150 x 12.5", "EN10219 150x150x12.5"] |
| 400 | standard = "EN 10219" |
| 401 | |
| 402 | [[presets]] |
| 403 | id = "SHS-160x160x5" |
| 404 | title = "SHS 160 × 160 × 5 (EN 10219), 1000 mm" |
| 405 | params = { width = 160, height = 160, wall = 5, length = 1000 } |
| 406 | aliases = ["EN 10219 160x160x5", "SHS 160x160x5", "square hollow section 160 x 160 x 5", "EN10219 160x160x5"] |
| 407 | standard = "EN 10219" |
| 408 | |
| 409 | [[presets]] |
| 410 | id = "SHS-160x160x6" |
| 411 | title = "SHS 160 × 160 × 6 (EN 10219), 1000 mm" |
| 412 | params = { width = 160, height = 160, wall = 6, length = 1000 } |
| 413 | aliases = ["EN 10219 160x160x6", "SHS 160x160x6", "square hollow section 160 x 160 x 6", "EN10219 160x160x6"] |
| 414 | standard = "EN 10219" |
| 415 | |
| 416 | [[presets]] |
| 417 | id = "SHS-160x160x6.3" |
| 418 | title = "SHS 160 × 160 × 6.3 (EN 10219), 1000 mm" |
| 419 | params = { width = 160, height = 160, wall = 6.3, length = 1000 } |
| 420 | aliases = ["EN 10219 160x160x6.3", "SHS 160x160x6.3", "square hollow section 160 x 160 x 6.3", "EN10219 160x160x6.3"] |
| 421 | standard = "EN 10219" |
| 422 | |
| 423 | [[presets]] |
| 424 | id = "SHS-160x160x8" |
| 425 | title = "SHS 160 × 160 × 8 (EN 10219), 1000 mm" |
| 426 | params = { width = 160, height = 160, wall = 8, length = 1000 } |
| 427 | aliases = ["EN 10219 160x160x8", "SHS 160x160x8", "square hollow section 160 x 160 x 8", "EN10219 160x160x8"] |
| 428 | standard = "EN 10219" |
| 429 | |
| 430 | [[presets]] |
| 431 | id = "SHS-160x160x10" |
| 432 | title = "SHS 160 × 160 × 10 (EN 10219), 1000 mm" |
| 433 | params = { width = 160, height = 160, wall = 10, length = 1000 } |
| 434 | aliases = ["EN 10219 160x160x10", "SHS 160x160x10", "square hollow section 160 x 160 x 10", "EN10219 160x160x10"] |
| 435 | standard = "EN 10219" |
| 436 | |
| 437 | [[presets]] |
| 438 | id = "SHS-160x160x12" |
| 439 | title = "SHS 160 × 160 × 12 (EN 10219), 1000 mm" |
| 440 | params = { width = 160, height = 160, wall = 12, length = 1000 } |
| 441 | aliases = ["EN 10219 160x160x12", "SHS 160x160x12", "square hollow section 160 x 160 x 12", "EN10219 160x160x12"] |
| 442 | standard = "EN 10219" |
| 443 | |
| 444 | [[presets]] |
| 445 | id = "SHS-160x160x12.5" |
| 446 | title = "SHS 160 × 160 × 12.5 (EN 10219), 1000 mm" |
| 447 | params = { width = 160, height = 160, wall = 12.5, length = 1000 } |
| 448 | aliases = ["EN 10219 160x160x12.5", "SHS 160x160x12.5", "square hollow section 160 x 160 x 12.5", "EN10219 160x160x12.5"] |
| 449 | standard = "EN 10219" |
| 450 | |
| 451 | [[presets]] |
| 452 | id = "SHS-180x180x5" |
| 453 | title = "SHS 180 × 180 × 5 (EN 10219), 1000 mm" |
| 454 | params = { width = 180, height = 180, wall = 5, length = 1000 } |
| 455 | aliases = ["EN 10219 180x180x5", "SHS 180x180x5", "square hollow section 180 x 180 x 5", "EN10219 180x180x5"] |
| 456 | standard = "EN 10219" |
| 457 | |
| 458 | [[presets]] |
| 459 | id = "SHS-180x180x6" |
| 460 | title = "SHS 180 × 180 × 6 (EN 10219), 1000 mm" |
| 461 | params = { width = 180, height = 180, wall = 6, length = 1000 } |
| 462 | aliases = ["EN 10219 180x180x6", "SHS 180x180x6", "square hollow section 180 x 180 x 6", "EN10219 180x180x6"] |
| 463 | standard = "EN 10219" |
| 464 | |
| 465 | [[presets]] |
| 466 | id = "SHS-180x180x6.3" |
| 467 | title = "SHS 180 × 180 × 6.3 (EN 10219), 1000 mm" |
| 468 | params = { width = 180, height = 180, wall = 6.3, length = 1000 } |
| 469 | aliases = ["EN 10219 180x180x6.3", "SHS 180x180x6.3", "square hollow section 180 x 180 x 6.3", "EN10219 180x180x6.3"] |
| 470 | standard = "EN 10219" |
| 471 | |
| 472 | [[presets]] |
| 473 | id = "SHS-180x180x8" |
| 474 | title = "SHS 180 × 180 × 8 (EN 10219), 1000 mm" |
| 475 | params = { width = 180, height = 180, wall = 8, length = 1000 } |
| 476 | aliases = ["EN 10219 180x180x8", "SHS 180x180x8", "square hollow section 180 x 180 x 8", "EN10219 180x180x8"] |
| 477 | standard = "EN 10219" |
| 478 | |
| 479 | [[presets]] |
| 480 | id = "SHS-180x180x10" |
| 481 | title = "SHS 180 × 180 × 10 (EN 10219), 1000 mm" |
| 482 | params = { width = 180, height = 180, wall = 10, length = 1000 } |
| 483 | aliases = ["EN 10219 180x180x10", "SHS 180x180x10", "square hollow section 180 x 180 x 10", "EN10219 180x180x10"] |
| 484 | standard = "EN 10219" |
| 485 | |
| 486 | [[presets]] |
| 487 | id = "SHS-180x180x12" |
| 488 | title = "SHS 180 × 180 × 12 (EN 10219), 1000 mm" |
| 489 | params = { width = 180, height = 180, wall = 12, length = 1000 } |
| 490 | aliases = ["EN 10219 180x180x12", "SHS 180x180x12", "square hollow section 180 x 180 x 12", "EN10219 180x180x12"] |
| 491 | standard = "EN 10219" |
| 492 | |
| 493 | [[presets]] |
| 494 | id = "SHS-180x180x12.5" |
| 495 | title = "SHS 180 × 180 × 12.5 (EN 10219), 1000 mm" |
| 496 | params = { width = 180, height = 180, wall = 12.5, length = 1000 } |
| 497 | aliases = ["EN 10219 180x180x12.5", "SHS 180x180x12.5", "square hollow section 180 x 180 x 12.5", "EN10219 180x180x12.5"] |
| 498 | standard = "EN 10219" |
| 499 | |
| 500 | [[presets]] |
| 501 | id = "SHS-200x200x5" |
| 502 | title = "SHS 200 × 200 × 5 (EN 10219), 1000 mm" |
| 503 | params = { width = 200, height = 200, wall = 5, length = 1000 } |
| 504 | aliases = ["EN 10219 200x200x5", "SHS 200x200x5", "square hollow section 200 x 200 x 5", "EN10219 200x200x5"] |
| 505 | standard = "EN 10219" |
| 506 | |
| 507 | [[presets]] |
| 508 | id = "SHS-200x200x6" |
| 509 | title = "SHS 200 × 200 × 6 (EN 10219), 1000 mm" |
| 510 | params = { width = 200, height = 200, wall = 6, length = 1000 } |
| 511 | aliases = ["EN 10219 200x200x6", "SHS 200x200x6", "square hollow section 200 x 200 x 6", "EN10219 200x200x6"] |
| 512 | standard = "EN 10219" |
| 513 | |
| 514 | [[presets]] |
| 515 | id = "SHS-200x200x6.3" |
| 516 | title = "SHS 200 × 200 × 6.3 (EN 10219), 1000 mm" |
| 517 | params = { width = 200, height = 200, wall = 6.3, length = 1000 } |
| 518 | aliases = ["EN 10219 200x200x6.3", "SHS 200x200x6.3", "square hollow section 200 x 200 x 6.3", "EN10219 200x200x6.3"] |
| 519 | standard = "EN 10219" |
| 520 | |
| 521 | [[presets]] |
| 522 | id = "SHS-200x200x8" |
| 523 | title = "SHS 200 × 200 × 8 (EN 10219), 1000 mm" |
| 524 | params = { width = 200, height = 200, wall = 8, length = 1000 } |
| 525 | aliases = ["EN 10219 200x200x8", "SHS 200x200x8", "square hollow section 200 x 200 x 8", "EN10219 200x200x8"] |
| 526 | standard = "EN 10219" |
| 527 | |
| 528 | [[presets]] |
| 529 | id = "SHS-200x200x10" |
| 530 | title = "SHS 200 × 200 × 10 (EN 10219), 1000 mm" |
| 531 | params = { width = 200, height = 200, wall = 10, length = 1000 } |
| 532 | aliases = ["EN 10219 200x200x10", "SHS 200x200x10", "square hollow section 200 x 200 x 10", "EN10219 200x200x10"] |
| 533 | standard = "EN 10219" |
| 534 | |
| 535 | [[presets]] |
| 536 | id = "SHS-200x200x12" |
| 537 | title = "SHS 200 × 200 × 12 (EN 10219), 1000 mm" |
| 538 | params = { width = 200, height = 200, wall = 12, length = 1000 } |
| 539 | aliases = ["EN 10219 200x200x12", "SHS 200x200x12", "square hollow section 200 x 200 x 12", "EN10219 200x200x12"] |
| 540 | standard = "EN 10219" |
| 541 | |
| 542 | [[presets]] |
| 543 | id = "SHS-200x200x12.5" |
| 544 | title = "SHS 200 × 200 × 12.5 (EN 10219), 1000 mm" |
| 545 | params = { width = 200, height = 200, wall = 12.5, length = 1000 } |
| 546 | aliases = ["EN 10219 200x200x12.5", "SHS 200x200x12.5", "square hollow section 200 x 200 x 12.5", "EN10219 200x200x12.5"] |
| 547 | standard = "EN 10219" |
| 548 | |
| 549 | [[presets]] |
| 550 | id = "RHS-50x30x3" |
| 551 | title = "RHS 50 × 30 × 3 (EN 10219), 1000 mm" |
| 552 | params = { width = 50, height = 30, wall = 3, length = 1000 } |
| 553 | aliases = ["EN 10219 50x30x3", "RHS 50x30x3", "rectangular hollow section 50 x 30 x 3", "EN10219 50x30x3"] |
| 554 | standard = "EN 10219" |
| 555 | |
| 556 | [[presets]] |
| 557 | id = "RHS-60x40x3" |
| 558 | title = "RHS 60 × 40 × 3 (EN 10219), 1000 mm" |
| 559 | params = { width = 60, height = 40, wall = 3, length = 1000 } |
| 560 | aliases = ["EN 10219 60x40x3", "RHS 60x40x3", "rectangular hollow section 60 x 40 x 3", "EN10219 60x40x3"] |
| 561 | standard = "EN 10219" |
| 562 | |
| 563 | [[presets]] |
| 564 | id = "RHS-60x40x4" |
| 565 | title = "RHS 60 × 40 × 4 (EN 10219), 1000 mm" |
| 566 | params = { width = 60, height = 40, wall = 4, length = 1000 } |
| 567 | aliases = ["EN 10219 60x40x4", "RHS 60x40x4", "rectangular hollow section 60 x 40 x 4", "EN10219 60x40x4"] |
| 568 | standard = "EN 10219" |
| 569 | |
| 570 | [[presets]] |
| 571 | id = "RHS-80x40x3" |
| 572 | title = "RHS 80 × 40 × 3 (EN 10219), 1000 mm" |
| 573 | params = { width = 80, height = 40, wall = 3, length = 1000 } |
| 574 | aliases = ["EN 10219 80x40x3", "RHS 80x40x3", "rectangular hollow section 80 x 40 x 3", "EN10219 80x40x3"] |
| 575 | standard = "EN 10219" |
| 576 | |
| 577 | [[presets]] |
| 578 | id = "RHS-80x40x4" |
| 579 | title = "RHS 80 × 40 × 4 (EN 10219), 1000 mm" |
| 580 | params = { width = 80, height = 40, wall = 4, length = 1000 } |
| 581 | aliases = ["EN 10219 80x40x4", "RHS 80x40x4", "rectangular hollow section 80 x 40 x 4", "EN10219 80x40x4"] |
| 582 | standard = "EN 10219" |
| 583 | |
| 584 | [[presets]] |
| 585 | id = "RHS-100x50x3" |
| 586 | title = "RHS 100 × 50 × 3 (EN 10219), 1000 mm" |
| 587 | params = { width = 100, height = 50, wall = 3, length = 1000 } |
| 588 | aliases = ["EN 10219 100x50x3", "RHS 100x50x3", "rectangular hollow section 100 x 50 x 3", "100 x 50 x 3 rectangular tube", "EN10219 100x50x3"] |
| 589 | standard = "EN 10219" |
| 590 | |
| 591 | [[presets]] |
| 592 | id = "RHS-100x50x4" |
| 593 | title = "RHS 100 × 50 × 4 (EN 10219), 1000 mm" |
| 594 | params = { width = 100, height = 50, wall = 4, length = 1000 } |
| 595 | aliases = ["EN 10219 100x50x4", "RHS 100x50x4", "rectangular hollow section 100 x 50 x 4", "EN10219 100x50x4"] |
| 596 | standard = "EN 10219" |
| 597 | |
| 598 | [[presets]] |
| 599 | id = "RHS-100x50x5" |
| 600 | title = "RHS 100 × 50 × 5 (EN 10219), 1000 mm" |
| 601 | params = { width = 100, height = 50, wall = 5, length = 1000 } |
| 602 | aliases = ["EN 10219 100x50x5", "RHS 100x50x5", "rectangular hollow section 100 x 50 x 5", "100 x 50 x 5 rectangular tube", "EN10219 100x50x5"] |
| 603 | standard = "EN 10219" |
| 604 | |
| 605 | [[presets]] |
| 606 | id = "RHS-100x60x4" |
| 607 | title = "RHS 100 × 60 × 4 (EN 10219), 1000 mm" |
| 608 | params = { width = 100, height = 60, wall = 4, length = 1000 } |
| 609 | aliases = ["EN 10219 100x60x4", "RHS 100x60x4", "rectangular hollow section 100 x 60 x 4", "EN10219 100x60x4"] |
| 610 | standard = "EN 10219" |
| 611 | |
| 612 | [[presets]] |
| 613 | id = "RHS-120x60x4" |
| 614 | title = "RHS 120 × 60 × 4 (EN 10219), 1000 mm" |
| 615 | params = { width = 120, height = 60, wall = 4, length = 1000 } |
| 616 | aliases = ["EN 10219 120x60x4", "RHS 120x60x4", "rectangular hollow section 120 x 60 x 4", "EN10219 120x60x4"] |
| 617 | standard = "EN 10219" |
| 618 | |
| 619 | [[presets]] |
| 620 | id = "RHS-120x80x4" |
| 621 | title = "RHS 120 × 80 × 4 (EN 10219), 1000 mm" |
| 622 | params = { width = 120, height = 80, wall = 4, length = 1000 } |
| 623 | aliases = ["EN 10219 120x80x4", "RHS 120x80x4", "rectangular hollow section 120 x 80 x 4", "EN10219 120x80x4"] |
| 624 | standard = "EN 10219" |
| 625 | |
| 626 | [[presets]] |
| 627 | id = "RHS-120x80x5" |
| 628 | title = "RHS 120 × 80 × 5 (EN 10219), 1000 mm" |
| 629 | params = { width = 120, height = 80, wall = 5, length = 1000 } |
| 630 | aliases = ["EN 10219 120x80x5", "RHS 120x80x5", "rectangular hollow section 120 x 80 x 5", "EN10219 120x80x5"] |
| 631 | standard = "EN 10219" |
| 632 | |
| 633 | [[presets]] |
| 634 | id = "RHS-140x80x5" |
| 635 | title = "RHS 140 × 80 × 5 (EN 10219), 1000 mm" |
| 636 | params = { width = 140, height = 80, wall = 5, length = 1000 } |
| 637 | aliases = ["EN 10219 140x80x5", "RHS 140x80x5", "rectangular hollow section 140 x 80 x 5", "EN10219 140x80x5"] |
| 638 | standard = "EN 10219" |
| 639 | |
| 640 | [[presets]] |
| 641 | id = "RHS-150x100x5" |
| 642 | title = "RHS 150 × 100 × 5 (EN 10219), 1000 mm" |
| 643 | params = { width = 150, height = 100, wall = 5, length = 1000 } |
| 644 | aliases = ["EN 10219 150x100x5", "RHS 150x100x5", "rectangular hollow section 150 x 100 x 5", "EN10219 150x100x5"] |
| 645 | standard = "EN 10219" |
| 646 | |
| 647 | [[presets]] |
| 648 | id = "RHS-160x80x5" |
| 649 | title = "RHS 160 × 80 × 5 (EN 10219), 1000 mm" |
| 650 | params = { width = 160, height = 80, wall = 5, length = 1000 } |
| 651 | aliases = ["EN 10219 160x80x5", "RHS 160x80x5", "rectangular hollow section 160 x 80 x 5", "EN10219 160x80x5"] |
| 652 | standard = "EN 10219" |
| 653 | |
| 654 | [[presets]] |
| 655 | id = "RHS-180x100x6" |
| 656 | title = "RHS 180 × 100 × 6 (EN 10219), 1000 mm" |
| 657 | params = { width = 180, height = 100, wall = 6, length = 1000 } |
| 658 | aliases = ["EN 10219 180x100x6", "RHS 180x100x6", "rectangular hollow section 180 x 100 x 6", "EN10219 180x100x6"] |
| 659 | standard = "EN 10219" |
| 660 | |
| 661 | [[presets]] |
| 662 | id = "RHS-200x100x6" |
| 663 | title = "RHS 200 × 100 × 6 (EN 10219), 1000 mm" |
| 664 | params = { width = 200, height = 100, wall = 6, length = 1000 } |
| 665 | aliases = ["EN 10219 200x100x6", "RHS 200x100x6", "rectangular hollow section 200 x 100 x 6", "EN10219 200x100x6"] |
| 666 | standard = "EN 10219" |
| 667 | |
| 668 | [[presets]] |
| 669 | id = "tube-10x10x1.0-100" |
| 670 | title = "Light square tube 10 × 10 × 1.0, 100 mm" |
| 671 | params = { width = 10, height = 10, wall = 1, length = 100, corners = "sharp", material = "unspecified" } |
| 672 | aliases = ["square tube 10x10x1.0 100 mm", "10x10 tube 100 mm", "box section 10 x 10 x 1.0"] |
| 673 | standard = "step.parts generic tube model" |
| 674 | |
| 675 | [[presets]] |
| 676 | id = "tube-10x10x1.0-150" |
| 677 | title = "Light square tube 10 × 10 × 1.0, 150 mm" |
| 678 | params = { width = 10, height = 10, wall = 1, length = 150, corners = "sharp", material = "unspecified" } |
| 679 | aliases = ["square tube 10x10x1.0 150 mm", "10x10 tube 150 mm", "box section 10 x 10 x 1.0"] |
| 680 | standard = "step.parts generic tube model" |
| 681 | |
| 682 | [[presets]] |
| 683 | id = "tube-10x10x1.0-200" |
| 684 | title = "Light square tube 10 × 10 × 1.0, 200 mm" |
| 685 | params = { width = 10, height = 10, wall = 1, length = 200, corners = "sharp", material = "unspecified" } |
| 686 | aliases = ["square tube 10x10x1.0 200 mm", "10x10 tube 200 mm", "box section 10 x 10 x 1.0"] |
| 687 | standard = "step.parts generic tube model" |
| 688 | |
| 689 | [[presets]] |
| 690 | id = "tube-10x10x1.0-250" |
| 691 | title = "Light square tube 10 × 10 × 1.0, 250 mm" |
| 692 | params = { width = 10, height = 10, wall = 1, length = 250, corners = "sharp", material = "unspecified" } |
| 693 | aliases = ["square tube 10x10x1.0 250 mm", "10x10 tube 250 mm", "box section 10 x 10 x 1.0"] |
| 694 | standard = "step.parts generic tube model" |
| 695 | |
| 696 | [[presets]] |
| 697 | id = "tube-10x10x1.0-300" |
| 698 | title = "Light square tube 10 × 10 × 1.0, 300 mm" |
| 699 | params = { width = 10, height = 10, wall = 1, length = 300, corners = "sharp", material = "unspecified" } |
| 700 | aliases = ["square tube 10x10x1.0 300 mm", "10x10 tube 300 mm", "box section 10 x 10 x 1.0"] |
| 701 | standard = "step.parts generic tube model" |
| 702 | |
| 703 | [[presets]] |
| 704 | id = "tube-10x10x1.0-400" |
| 705 | title = "Light square tube 10 × 10 × 1.0, 400 mm" |
| 706 | params = { width = 10, height = 10, wall = 1, length = 400, corners = "sharp", material = "unspecified" } |
| 707 | aliases = ["square tube 10x10x1.0 400 mm", "10x10 tube 400 mm", "box section 10 x 10 x 1.0"] |
| 708 | standard = "step.parts generic tube model" |
| 709 | |
| 710 | [[presets]] |
| 711 | id = "tube-10x10x1.0-500" |
| 712 | title = "Light square tube 10 × 10 × 1.0, 500 mm" |
| 713 | params = { width = 10, height = 10, wall = 1, length = 500, corners = "sharp", material = "unspecified" } |
| 714 | aliases = ["square tube 10x10x1.0 500 mm", "10x10 tube 500 mm", "box section 10 x 10 x 1.0"] |
| 715 | standard = "step.parts generic tube model" |
| 716 | |
| 717 | [[presets]] |
| 718 | id = "tube-10x10x1.0-600" |
| 719 | title = "Light square tube 10 × 10 × 1.0, 600 mm" |
| 720 | params = { width = 10, height = 10, wall = 1, length = 600, corners = "sharp", material = "unspecified" } |
| 721 | aliases = ["square tube 10x10x1.0 600 mm", "10x10 tube 600 mm", "box section 10 x 10 x 1.0"] |
| 722 | standard = "step.parts generic tube model" |
| 723 | |
| 724 | [[presets]] |
| 725 | id = "tube-10x10x1.0-750" |
| 726 | title = "Light square tube 10 × 10 × 1.0, 750 mm" |
| 727 | params = { width = 10, height = 10, wall = 1, length = 750, corners = "sharp", material = "unspecified" } |
| 728 | aliases = ["square tube 10x10x1.0 750 mm", "10x10 tube 750 mm", "box section 10 x 10 x 1.0"] |
| 729 | standard = "step.parts generic tube model" |
| 730 | |
| 731 | [[presets]] |
| 732 | id = "tube-10x10x1.0-1000" |
| 733 | title = "Light square tube 10 × 10 × 1.0, 1000 mm" |
| 734 | params = { width = 10, height = 10, wall = 1, length = 1000, corners = "sharp", material = "unspecified" } |
| 735 | aliases = ["square tube 10x10x1.0 1000 mm", "10x10 tube 1000 mm", "box section 10 x 10 x 1.0"] |
| 736 | standard = "step.parts generic tube model" |
| 737 | |
| 738 | [[presets]] |
| 739 | id = "tube-15x15x1.2-100" |
| 740 | title = "Light square tube 15 × 15 × 1.2, 100 mm" |
| 741 | params = { width = 15, height = 15, wall = 1.2, length = 100, corners = "sharp", material = "unspecified" } |
| 742 | aliases = ["square tube 15x15x1.2 100 mm", "15x15 tube 100 mm", "box section 15 x 15 x 1.2"] |
| 743 | standard = "step.parts generic tube model" |
| 744 | |
| 745 | [[presets]] |
| 746 | id = "tube-15x15x1.2-150" |
| 747 | title = "Light square tube 15 × 15 × 1.2, 150 mm" |
| 748 | params = { width = 15, height = 15, wall = 1.2, length = 150, corners = "sharp", material = "unspecified" } |
| 749 | aliases = ["square tube 15x15x1.2 150 mm", "15x15 tube 150 mm", "box section 15 x 15 x 1.2"] |
| 750 | standard = "step.parts generic tube model" |
| 751 | |
| 752 | [[presets]] |
| 753 | id = "tube-15x15x1.2-200" |
| 754 | title = "Light square tube 15 × 15 × 1.2, 200 mm" |
| 755 | params = { width = 15, height = 15, wall = 1.2, length = 200, corners = "sharp", material = "unspecified" } |
| 756 | aliases = ["square tube 15x15x1.2 200 mm", "15x15 tube 200 mm", "box section 15 x 15 x 1.2"] |
| 757 | standard = "step.parts generic tube model" |
| 758 | |
| 759 | [[presets]] |
| 760 | id = "tube-15x15x1.2-250" |
| 761 | title = "Light square tube 15 × 15 × 1.2, 250 mm" |
| 762 | params = { width = 15, height = 15, wall = 1.2, length = 250, corners = "sharp", material = "unspecified" } |
| 763 | aliases = ["square tube 15x15x1.2 250 mm", "15x15 tube 250 mm", "box section 15 x 15 x 1.2"] |
| 764 | standard = "step.parts generic tube model" |
| 765 | |
| 766 | [[presets]] |
| 767 | id = "tube-15x15x1.2-300" |
| 768 | title = "Light square tube 15 × 15 × 1.2, 300 mm" |
| 769 | params = { width = 15, height = 15, wall = 1.2, length = 300, corners = "sharp", material = "unspecified" } |
| 770 | aliases = ["square tube 15x15x1.2 300 mm", "15x15 tube 300 mm", "box section 15 x 15 x 1.2"] |
| 771 | standard = "step.parts generic tube model" |
| 772 | |
| 773 | [[presets]] |
| 774 | id = "tube-15x15x1.2-400" |
| 775 | title = "Light square tube 15 × 15 × 1.2, 400 mm" |
| 776 | params = { width = 15, height = 15, wall = 1.2, length = 400, corners = "sharp", material = "unspecified" } |
| 777 | aliases = ["square tube 15x15x1.2 400 mm", "15x15 tube 400 mm", "box section 15 x 15 x 1.2"] |
| 778 | standard = "step.parts generic tube model" |
| 779 | |
| 780 | [[presets]] |
| 781 | id = "tube-15x15x1.2-500" |
| 782 | title = "Light square tube 15 × 15 × 1.2, 500 mm" |
| 783 | params = { width = 15, height = 15, wall = 1.2, length = 500, corners = "sharp", material = "unspecified" } |
| 784 | aliases = ["square tube 15x15x1.2 500 mm", "15x15 tube 500 mm", "box section 15 x 15 x 1.2"] |
| 785 | standard = "step.parts generic tube model" |
| 786 | |
| 787 | [[presets]] |
| 788 | id = "tube-15x15x1.2-600" |
| 789 | title = "Light square tube 15 × 15 × 1.2, 600 mm" |
| 790 | params = { width = 15, height = 15, wall = 1.2, length = 600, corners = "sharp", material = "unspecified" } |
| 791 | aliases = ["square tube 15x15x1.2 600 mm", "15x15 tube 600 mm", "box section 15 x 15 x 1.2"] |
| 792 | standard = "step.parts generic tube model" |
| 793 | |
| 794 | [[presets]] |
| 795 | id = "tube-15x15x1.2-750" |
| 796 | title = "Light square tube 15 × 15 × 1.2, 750 mm" |
| 797 | params = { width = 15, height = 15, wall = 1.2, length = 750, corners = "sharp", material = "unspecified" } |
| 798 | aliases = ["square tube 15x15x1.2 750 mm", "15x15 tube 750 mm", "box section 15 x 15 x 1.2"] |
| 799 | standard = "step.parts generic tube model" |
| 800 | |
| 801 | [[presets]] |
| 802 | id = "tube-15x15x1.2-1000" |
| 803 | title = "Light square tube 15 × 15 × 1.2, 1000 mm" |
| 804 | params = { width = 15, height = 15, wall = 1.2, length = 1000, corners = "sharp", material = "unspecified" } |
| 805 | aliases = ["square tube 15x15x1.2 1000 mm", "15x15 tube 1000 mm", "box section 15 x 15 x 1.2"] |
| 806 | standard = "step.parts generic tube model" |
| 807 | |
| 808 | [[presets]] |
| 809 | id = "tube-20x20x1.6-100" |
| 810 | title = "Light square tube 20 × 20 × 1.6, 100 mm" |
| 811 | params = { width = 20, height = 20, wall = 1.6, length = 100, corners = "sharp", material = "unspecified" } |
| 812 | aliases = ["square tube 20x20x1.6 100 mm", "20x20 tube 100 mm", "box section 20 x 20 x 1.6"] |
| 813 | standard = "step.parts generic tube model" |
| 814 | |
| 815 | [[presets]] |
| 816 | id = "tube-20x20x1.6-150" |
| 817 | title = "Light square tube 20 × 20 × 1.6, 150 mm" |
| 818 | params = { width = 20, height = 20, wall = 1.6, length = 150, corners = "sharp", material = "unspecified" } |
| 819 | aliases = ["square tube 20x20x1.6 150 mm", "20x20 tube 150 mm", "box section 20 x 20 x 1.6"] |
| 820 | standard = "step.parts generic tube model" |
| 821 | |
| 822 | [[presets]] |
| 823 | id = "tube-20x20x1.6-200" |
| 824 | title = "Light square tube 20 × 20 × 1.6, 200 mm" |
| 825 | params = { width = 20, height = 20, wall = 1.6, length = 200, corners = "sharp", material = "unspecified" } |
| 826 | aliases = ["square tube 20x20x1.6 200 mm", "20x20 tube 200 mm", "box section 20 x 20 x 1.6"] |
| 827 | standard = "step.parts generic tube model" |
| 828 | |
| 829 | [[presets]] |
| 830 | id = "tube-20x20x1.6-250" |
| 831 | title = "Light square tube 20 × 20 × 1.6, 250 mm" |
| 832 | params = { width = 20, height = 20, wall = 1.6, length = 250, corners = "sharp", material = "unspecified" } |
| 833 | aliases = ["square tube 20x20x1.6 250 mm", "20x20 tube 250 mm", "box section 20 x 20 x 1.6"] |
| 834 | standard = "step.parts generic tube model" |
| 835 | |
| 836 | [[presets]] |
| 837 | id = "tube-20x20x1.6-300" |
| 838 | title = "Light square tube 20 × 20 × 1.6, 300 mm" |
| 839 | params = { width = 20, height = 20, wall = 1.6, length = 300, corners = "sharp", material = "unspecified" } |
| 840 | aliases = ["square tube 20x20x1.6 300 mm", "20x20 tube 300 mm", "box section 20 x 20 x 1.6"] |
| 841 | standard = "step.parts generic tube model" |
| 842 | |
| 843 | [[presets]] |
| 844 | id = "tube-20x20x1.6-400" |
| 845 | title = "Light square tube 20 × 20 × 1.6, 400 mm" |
| 846 | params = { width = 20, height = 20, wall = 1.6, length = 400, corners = "sharp", material = "unspecified" } |
| 847 | aliases = ["square tube 20x20x1.6 400 mm", "20x20 tube 400 mm", "box section 20 x 20 x 1.6"] |
| 848 | standard = "step.parts generic tube model" |
| 849 | |
| 850 | [[presets]] |
| 851 | id = "tube-20x20x1.6-500" |
| 852 | title = "Light square tube 20 × 20 × 1.6, 500 mm" |
| 853 | params = { width = 20, height = 20, wall = 1.6, length = 500, corners = "sharp", material = "unspecified" } |
| 854 | aliases = ["square tube 20x20x1.6 500 mm", "20x20 tube 500 mm", "box section 20 x 20 x 1.6"] |
| 855 | standard = "step.parts generic tube model" |
| 856 | |
| 857 | [[presets]] |
| 858 | id = "tube-20x20x1.6-600" |
| 859 | title = "Light square tube 20 × 20 × 1.6, 600 mm" |
| 860 | params = { width = 20, height = 20, wall = 1.6, length = 600, corners = "sharp", material = "unspecified" } |
| 861 | aliases = ["square tube 20x20x1.6 600 mm", "20x20 tube 600 mm", "box section 20 x 20 x 1.6"] |
| 862 | standard = "step.parts generic tube model" |
| 863 | |
| 864 | [[presets]] |
| 865 | id = "tube-20x20x1.6-750" |
| 866 | title = "Light square tube 20 × 20 × 1.6, 750 mm" |
| 867 | params = { width = 20, height = 20, wall = 1.6, length = 750, corners = "sharp", material = "unspecified" } |
| 868 | aliases = ["square tube 20x20x1.6 750 mm", "20x20 tube 750 mm", "box section 20 x 20 x 1.6"] |
| 869 | standard = "step.parts generic tube model" |
| 870 | |
| 871 | [[presets]] |
| 872 | id = "tube-20x20x1.6-1000" |
| 873 | title = "Light square tube 20 × 20 × 1.6, 1000 mm" |
| 874 | params = { width = 20, height = 20, wall = 1.6, length = 1000, corners = "sharp", material = "unspecified" } |
| 875 | aliases = ["square tube 20x20x1.6 1000 mm", "20x20 tube 1000 mm", "box section 20 x 20 x 1.6"] |
| 876 | standard = "step.parts generic tube model" |
| 877 | |
| 878 | [[presets]] |
| 879 | id = "tube-30x30x2.4-100" |
| 880 | title = "Light square tube 30 × 30 × 2.4, 100 mm" |
| 881 | params = { width = 30, height = 30, wall = 2.4, length = 100, corners = "sharp", material = "unspecified" } |
| 882 | aliases = ["square tube 30x30x2.4 100 mm", "30x30 tube 100 mm", "box section 30 x 30 x 2.4"] |
| 883 | standard = "step.parts generic tube model" |
| 884 | |
| 885 | [[presets]] |
| 886 | id = "tube-30x30x2.4-150" |
| 887 | title = "Light square tube 30 × 30 × 2.4, 150 mm" |
| 888 | params = { width = 30, height = 30, wall = 2.4, length = 150, corners = "sharp", material = "unspecified" } |
| 889 | aliases = ["square tube 30x30x2.4 150 mm", "30x30 tube 150 mm", "box section 30 x 30 x 2.4"] |
| 890 | standard = "step.parts generic tube model" |
| 891 | |
| 892 | [[presets]] |
| 893 | id = "tube-30x30x2.4-200" |
| 894 | title = "Light square tube 30 × 30 × 2.4, 200 mm" |
| 895 | params = { width = 30, height = 30, wall = 2.4, length = 200, corners = "sharp", material = "unspecified" } |
| 896 | aliases = ["square tube 30x30x2.4 200 mm", "30x30 tube 200 mm", "box section 30 x 30 x 2.4"] |
| 897 | standard = "step.parts generic tube model" |
| 898 | |
| 899 | [[presets]] |
| 900 | id = "tube-30x30x2.4-250" |
| 901 | title = "Light square tube 30 × 30 × 2.4, 250 mm" |
| 902 | params = { width = 30, height = 30, wall = 2.4, length = 250, corners = "sharp", material = "unspecified" } |
| 903 | aliases = ["square tube 30x30x2.4 250 mm", "30x30 tube 250 mm", "box section 30 x 30 x 2.4"] |
| 904 | standard = "step.parts generic tube model" |
| 905 | |
| 906 | [[presets]] |
| 907 | id = "tube-30x30x2.4-300" |
| 908 | title = "Light square tube 30 × 30 × 2.4, 300 mm" |
| 909 | params = { width = 30, height = 30, wall = 2.4, length = 300, corners = "sharp", material = "unspecified" } |
| 910 | aliases = ["square tube 30x30x2.4 300 mm", "30x30 tube 300 mm", "box section 30 x 30 x 2.4"] |
| 911 | standard = "step.parts generic tube model" |
| 912 | |
| 913 | [[presets]] |
| 914 | id = "tube-30x30x2.4-400" |
| 915 | title = "Light square tube 30 × 30 × 2.4, 400 mm" |
| 916 | params = { width = 30, height = 30, wall = 2.4, length = 400, corners = "sharp", material = "unspecified" } |
| 917 | aliases = ["square tube 30x30x2.4 400 mm", "30x30 tube 400 mm", "box section 30 x 30 x 2.4"] |
| 918 | standard = "step.parts generic tube model" |
| 919 | |
| 920 | [[presets]] |
| 921 | id = "tube-30x30x2.4-500" |
| 922 | title = "Light square tube 30 × 30 × 2.4, 500 mm" |
| 923 | params = { width = 30, height = 30, wall = 2.4, length = 500, corners = "sharp", material = "unspecified" } |
| 924 | aliases = ["square tube 30x30x2.4 500 mm", "30x30 tube 500 mm", "box section 30 x 30 x 2.4"] |
| 925 | standard = "step.parts generic tube model" |
| 926 | |
| 927 | [[presets]] |
| 928 | id = "tube-30x30x2.4-600" |
| 929 | title = "Light square tube 30 × 30 × 2.4, 600 mm" |
| 930 | params = { width = 30, height = 30, wall = 2.4, length = 600, corners = "sharp", material = "unspecified" } |
| 931 | aliases = ["square tube 30x30x2.4 600 mm", "30x30 tube 600 mm", "box section 30 x 30 x 2.4"] |
| 932 | standard = "step.parts generic tube model" |
| 933 | |
| 934 | [[presets]] |
| 935 | id = "tube-30x30x2.4-750" |
| 936 | title = "Light square tube 30 × 30 × 2.4, 750 mm" |
| 937 | params = { width = 30, height = 30, wall = 2.4, length = 750, corners = "sharp", material = "unspecified" } |
| 938 | aliases = ["square tube 30x30x2.4 750 mm", "30x30 tube 750 mm", "box section 30 x 30 x 2.4"] |
| 939 | standard = "step.parts generic tube model" |
| 940 | |
| 941 | [[presets]] |
| 942 | id = "tube-30x30x2.4-1000" |
| 943 | title = "Light square tube 30 × 30 × 2.4, 1000 mm" |
| 944 | params = { width = 30, height = 30, wall = 2.4, length = 1000, corners = "sharp", material = "unspecified" } |
| 945 | aliases = ["square tube 30x30x2.4 1000 mm", "30x30 tube 1000 mm", "box section 30 x 30 x 2.4"] |
| 946 | standard = "step.parts generic tube model" |
| 947 | |
| 948 | [[presets]] |
| 949 | id = "tube-40x40x3.2-100" |
| 950 | title = "Light square tube 40 × 40 × 3.2, 100 mm" |
| 951 | params = { width = 40, height = 40, wall = 3.2, length = 100, corners = "sharp", material = "unspecified" } |
| 952 | aliases = ["square tube 40x40x3.2 100 mm", "40x40 tube 100 mm", "box section 40 x 40 x 3.2"] |
| 953 | standard = "step.parts generic tube model" |
| 954 | |
| 955 | [[presets]] |
| 956 | id = "tube-40x40x3.2-150" |
| 957 | title = "Light square tube 40 × 40 × 3.2, 150 mm" |
| 958 | params = { width = 40, height = 40, wall = 3.2, length = 150, corners = "sharp", material = "unspecified" } |
| 959 | aliases = ["square tube 40x40x3.2 150 mm", "40x40 tube 150 mm", "box section 40 x 40 x 3.2"] |
| 960 | standard = "step.parts generic tube model" |
| 961 | |
| 962 | [[presets]] |
| 963 | id = "tube-40x40x3.2-200" |
| 964 | title = "Light square tube 40 × 40 × 3.2, 200 mm" |
| 965 | params = { width = 40, height = 40, wall = 3.2, length = 200, corners = "sharp", material = "unspecified" } |
| 966 | aliases = ["square tube 40x40x3.2 200 mm", "40x40 tube 200 mm", "box section 40 x 40 x 3.2"] |
| 967 | standard = "step.parts generic tube model" |
| 968 | |
| 969 | [[presets]] |
| 970 | id = "tube-40x40x3.2-250" |
| 971 | title = "Light square tube 40 × 40 × 3.2, 250 mm" |
| 972 | params = { width = 40, height = 40, wall = 3.2, length = 250, corners = "sharp", material = "unspecified" } |
| 973 | aliases = ["square tube 40x40x3.2 250 mm", "40x40 tube 250 mm", "box section 40 x 40 x 3.2"] |
| 974 | standard = "step.parts generic tube model" |
| 975 | |
| 976 | [[presets]] |
| 977 | id = "tube-40x40x3.2-300" |
| 978 | title = "Light square tube 40 × 40 × 3.2, 300 mm" |
| 979 | params = { width = 40, height = 40, wall = 3.2, length = 300, corners = "sharp", material = "unspecified" } |
| 980 | aliases = ["square tube 40x40x3.2 300 mm", "40x40 tube 300 mm", "box section 40 x 40 x 3.2"] |
| 981 | standard = "step.parts generic tube model" |
| 982 | |
| 983 | [[presets]] |
| 984 | id = "tube-40x40x3.2-400" |
| 985 | title = "Light square tube 40 × 40 × 3.2, 400 mm" |
| 986 | params = { width = 40, height = 40, wall = 3.2, length = 400, corners = "sharp", material = "unspecified" } |
| 987 | aliases = ["square tube 40x40x3.2 400 mm", "40x40 tube 400 mm", "box section 40 x 40 x 3.2"] |
| 988 | standard = "step.parts generic tube model" |
| 989 | |
| 990 | [[presets]] |
| 991 | id = "tube-40x40x3.2-500" |
| 992 | title = "Light square tube 40 × 40 × 3.2, 500 mm" |
| 993 | params = { width = 40, height = 40, wall = 3.2, length = 500, corners = "sharp", material = "unspecified" } |
| 994 | aliases = ["square tube 40x40x3.2 500 mm", "40x40 tube 500 mm", "box section 40 x 40 x 3.2"] |
| 995 | standard = "step.parts generic tube model" |
| 996 | |
| 997 | [[presets]] |
| 998 | id = "tube-40x40x3.2-600" |
| 999 | title = "Light square tube 40 × 40 × 3.2, 600 mm" |
| 1000 | params = { width = 40, height = 40, wall = 3.2, length = 600, corners = "sharp", material = "unspecified" } |
| 1001 | aliases = ["square tube 40x40x3.2 600 mm", "40x40 tube 600 mm", "box section 40 x 40 x 3.2"] |
| 1002 | standard = "step.parts generic tube model" |
| 1003 | |
| 1004 | [[presets]] |
| 1005 | id = "tube-40x40x3.2-750" |
| 1006 | title = "Light square tube 40 × 40 × 3.2, 750 mm" |
| 1007 | params = { width = 40, height = 40, wall = 3.2, length = 750, corners = "sharp", material = "unspecified" } |
| 1008 | aliases = ["square tube 40x40x3.2 750 mm", "40x40 tube 750 mm", "box section 40 x 40 x 3.2"] |
| 1009 | standard = "step.parts generic tube model" |
| 1010 | |
| 1011 | [[presets]] |
| 1012 | id = "tube-40x40x3.2-1000" |
| 1013 | title = "Light square tube 40 × 40 × 3.2, 1000 mm" |
| 1014 | params = { width = 40, height = 40, wall = 3.2, length = 1000, corners = "sharp", material = "unspecified" } |
| 1015 | aliases = ["square tube 40x40x3.2 1000 mm", "40x40 tube 1000 mm", "box section 40 x 40 x 3.2"] |
| 1016 | standard = "step.parts generic tube model" |
| 1017 | |
| 1018 | [[presets]] |
| 1019 | id = "tube-20x10x1.0-100" |
| 1020 | title = "Light rectangular tube 20 × 10 × 1.0, 100 mm" |
| 1021 | params = { width = 20, height = 10, wall = 1, length = 100, corners = "sharp", material = "unspecified" } |
| 1022 | aliases = ["rectangular tube 20x10x1.0 100 mm", "20x10 tube 100 mm", "box section 20 x 10 x 1.0"] |
| 1023 | standard = "step.parts generic tube model" |
| 1024 | |
| 1025 | [[presets]] |
| 1026 | id = "tube-20x10x1.0-150" |
| 1027 | title = "Light rectangular tube 20 × 10 × 1.0, 150 mm" |
| 1028 | params = { width = 20, height = 10, wall = 1, length = 150, corners = "sharp", material = "unspecified" } |
| 1029 | aliases = ["rectangular tube 20x10x1.0 150 mm", "20x10 tube 150 mm", "box section 20 x 10 x 1.0"] |
| 1030 | standard = "step.parts generic tube model" |
| 1031 | |
| 1032 | [[presets]] |
| 1033 | id = "tube-20x10x1.0-200" |
| 1034 | title = "Light rectangular tube 20 × 10 × 1.0, 200 mm" |
| 1035 | params = { width = 20, height = 10, wall = 1, length = 200, corners = "sharp", material = "unspecified" } |
| 1036 | aliases = ["rectangular tube 20x10x1.0 200 mm", "20x10 tube 200 mm", "box section 20 x 10 x 1.0"] |
| 1037 | standard = "step.parts generic tube model" |
| 1038 | |
| 1039 | [[presets]] |
| 1040 | id = "tube-20x10x1.0-250" |
| 1041 | title = "Light rectangular tube 20 × 10 × 1.0, 250 mm" |
| 1042 | params = { width = 20, height = 10, wall = 1, length = 250, corners = "sharp", material = "unspecified" } |
| 1043 | aliases = ["rectangular tube 20x10x1.0 250 mm", "20x10 tube 250 mm", "box section 20 x 10 x 1.0"] |
| 1044 | standard = "step.parts generic tube model" |
| 1045 | |
| 1046 | [[presets]] |
| 1047 | id = "tube-20x10x1.0-300" |
| 1048 | title = "Light rectangular tube 20 × 10 × 1.0, 300 mm" |
| 1049 | params = { width = 20, height = 10, wall = 1, length = 300, corners = "sharp", material = "unspecified" } |
| 1050 | aliases = ["rectangular tube 20x10x1.0 300 mm", "20x10 tube 300 mm", "box section 20 x 10 x 1.0"] |
| 1051 | standard = "step.parts generic tube model" |
| 1052 | |
| 1053 | [[presets]] |
| 1054 | id = "tube-20x10x1.0-400" |
| 1055 | title = "Light rectangular tube 20 × 10 × 1.0, 400 mm" |
| 1056 | params = { width = 20, height = 10, wall = 1, length = 400, corners = "sharp", material = "unspecified" } |
| 1057 | aliases = ["rectangular tube 20x10x1.0 400 mm", "20x10 tube 400 mm", "box section 20 x 10 x 1.0"] |
| 1058 | standard = "step.parts generic tube model" |
| 1059 | |
| 1060 | [[presets]] |
| 1061 | id = "tube-20x10x1.0-500" |
| 1062 | title = "Light rectangular tube 20 × 10 × 1.0, 500 mm" |
| 1063 | params = { width = 20, height = 10, wall = 1, length = 500, corners = "sharp", material = "unspecified" } |
| 1064 | aliases = ["rectangular tube 20x10x1.0 500 mm", "20x10 tube 500 mm", "box section 20 x 10 x 1.0"] |
| 1065 | standard = "step.parts generic tube model" |
| 1066 | |
| 1067 | [[presets]] |
| 1068 | id = "tube-20x10x1.0-600" |
| 1069 | title = "Light rectangular tube 20 × 10 × 1.0, 600 mm" |
| 1070 | params = { width = 20, height = 10, wall = 1, length = 600, corners = "sharp", material = "unspecified" } |
| 1071 | aliases = ["rectangular tube 20x10x1.0 600 mm", "20x10 tube 600 mm", "box section 20 x 10 x 1.0"] |
| 1072 | standard = "step.parts generic tube model" |
| 1073 | |
| 1074 | [[presets]] |
| 1075 | id = "tube-20x10x1.0-750" |
| 1076 | title = "Light rectangular tube 20 × 10 × 1.0, 750 mm" |
| 1077 | params = { width = 20, height = 10, wall = 1, length = 750, corners = "sharp", material = "unspecified" } |
| 1078 | aliases = ["rectangular tube 20x10x1.0 750 mm", "20x10 tube 750 mm", "box section 20 x 10 x 1.0"] |
| 1079 | standard = "step.parts generic tube model" |
| 1080 | |
| 1081 | [[presets]] |
| 1082 | id = "tube-20x10x1.0-1000" |
| 1083 | title = "Light rectangular tube 20 × 10 × 1.0, 1000 mm" |
| 1084 | params = { width = 20, height = 10, wall = 1, length = 1000, corners = "sharp", material = "unspecified" } |
| 1085 | aliases = ["rectangular tube 20x10x1.0 1000 mm", "20x10 tube 1000 mm", "box section 20 x 10 x 1.0"] |
| 1086 | standard = "step.parts generic tube model" |
| 1087 | |
| 1088 | [[presets]] |
| 1089 | id = "tube-30x15x1.2-100" |
| 1090 | title = "Light rectangular tube 30 × 15 × 1.2, 100 mm" |
| 1091 | params = { width = 30, height = 15, wall = 1.2, length = 100, corners = "sharp", material = "unspecified" } |
| 1092 | aliases = ["rectangular tube 30x15x1.2 100 mm", "30x15 tube 100 mm", "box section 30 x 15 x 1.2"] |
| 1093 | standard = "step.parts generic tube model" |
| 1094 | |
| 1095 | [[presets]] |
| 1096 | id = "tube-30x15x1.2-150" |
| 1097 | title = "Light rectangular tube 30 × 15 × 1.2, 150 mm" |
| 1098 | params = { width = 30, height = 15, wall = 1.2, length = 150, corners = "sharp", material = "unspecified" } |
| 1099 | aliases = ["rectangular tube 30x15x1.2 150 mm", "30x15 tube 150 mm", "box section 30 x 15 x 1.2"] |
| 1100 | standard = "step.parts generic tube model" |
| 1101 | |
| 1102 | [[presets]] |
| 1103 | id = "tube-30x15x1.2-200" |
| 1104 | title = "Light rectangular tube 30 × 15 × 1.2, 200 mm" |
| 1105 | params = { width = 30, height = 15, wall = 1.2, length = 200, corners = "sharp", material = "unspecified" } |
| 1106 | aliases = ["rectangular tube 30x15x1.2 200 mm", "30x15 tube 200 mm", "box section 30 x 15 x 1.2"] |
| 1107 | standard = "step.parts generic tube model" |
| 1108 | |
| 1109 | [[presets]] |
| 1110 | id = "tube-30x15x1.2-250" |
| 1111 | title = "Light rectangular tube 30 × 15 × 1.2, 250 mm" |
| 1112 | params = { width = 30, height = 15, wall = 1.2, length = 250, corners = "sharp", material = "unspecified" } |
| 1113 | aliases = ["rectangular tube 30x15x1.2 250 mm", "30x15 tube 250 mm", "box section 30 x 15 x 1.2"] |
| 1114 | standard = "step.parts generic tube model" |
| 1115 | |
| 1116 | [[presets]] |
| 1117 | id = "tube-30x15x1.2-300" |
| 1118 | title = "Light rectangular tube 30 × 15 × 1.2, 300 mm" |
| 1119 | params = { width = 30, height = 15, wall = 1.2, length = 300, corners = "sharp", material = "unspecified" } |
| 1120 | aliases = ["rectangular tube 30x15x1.2 300 mm", "30x15 tube 300 mm", "box section 30 x 15 x 1.2"] |
| 1121 | standard = "step.parts generic tube model" |
| 1122 | |
| 1123 | [[presets]] |
| 1124 | id = "tube-30x15x1.2-400" |
| 1125 | title = "Light rectangular tube 30 × 15 × 1.2, 400 mm" |
| 1126 | params = { width = 30, height = 15, wall = 1.2, length = 400, corners = "sharp", material = "unspecified" } |
| 1127 | aliases = ["rectangular tube 30x15x1.2 400 mm", "30x15 tube 400 mm", "box section 30 x 15 x 1.2"] |
| 1128 | standard = "step.parts generic tube model" |
| 1129 | |
| 1130 | [[presets]] |
| 1131 | id = "tube-30x15x1.2-500" |
| 1132 | title = "Light rectangular tube 30 × 15 × 1.2, 500 mm" |
| 1133 | params = { width = 30, height = 15, wall = 1.2, length = 500, corners = "sharp", material = "unspecified" } |
| 1134 | aliases = ["rectangular tube 30x15x1.2 500 mm", "30x15 tube 500 mm", "box section 30 x 15 x 1.2"] |
| 1135 | standard = "step.parts generic tube model" |
| 1136 | |
| 1137 | [[presets]] |
| 1138 | id = "tube-30x15x1.2-600" |
| 1139 | title = "Light rectangular tube 30 × 15 × 1.2, 600 mm" |
| 1140 | params = { width = 30, height = 15, wall = 1.2, length = 600, corners = "sharp", material = "unspecified" } |
| 1141 | aliases = ["rectangular tube 30x15x1.2 600 mm", "30x15 tube 600 mm", "box section 30 x 15 x 1.2"] |
| 1142 | standard = "step.parts generic tube model" |
| 1143 | |
| 1144 | [[presets]] |
| 1145 | id = "tube-30x15x1.2-750" |
| 1146 | title = "Light rectangular tube 30 × 15 × 1.2, 750 mm" |
| 1147 | params = { width = 30, height = 15, wall = 1.2, length = 750, corners = "sharp", material = "unspecified" } |
| 1148 | aliases = ["rectangular tube 30x15x1.2 750 mm", "30x15 tube 750 mm", "box section 30 x 15 x 1.2"] |
| 1149 | standard = "step.parts generic tube model" |
| 1150 | |
| 1151 | [[presets]] |
| 1152 | id = "tube-30x15x1.2-1000" |
| 1153 | title = "Light rectangular tube 30 × 15 × 1.2, 1000 mm" |
| 1154 | params = { width = 30, height = 15, wall = 1.2, length = 1000, corners = "sharp", material = "unspecified" } |
| 1155 | aliases = ["rectangular tube 30x15x1.2 1000 mm", "30x15 tube 1000 mm", "box section 30 x 15 x 1.2"] |
| 1156 | standard = "step.parts generic tube model" |
| 1157 | |
| 1158 | [[presets]] |
| 1159 | id = "tube-40x20x1.6-100" |
| 1160 | title = "Light rectangular tube 40 × 20 × 1.6, 100 mm" |
| 1161 | params = { width = 40, height = 20, wall = 1.6, length = 100, corners = "sharp", material = "unspecified" } |
| 1162 | aliases = ["rectangular tube 40x20x1.6 100 mm", "40x20 tube 100 mm", "box section 40 x 20 x 1.6"] |
| 1163 | standard = "step.parts generic tube model" |
| 1164 | |
| 1165 | [[presets]] |
| 1166 | id = "tube-40x20x1.6-150" |
| 1167 | title = "Light rectangular tube 40 × 20 × 1.6, 150 mm" |
| 1168 | params = { width = 40, height = 20, wall = 1.6, length = 150, corners = "sharp", material = "unspecified" } |
| 1169 | aliases = ["rectangular tube 40x20x1.6 150 mm", "40x20 tube 150 mm", "box section 40 x 20 x 1.6"] |
| 1170 | standard = "step.parts generic tube model" |
| 1171 | |
| 1172 | [[presets]] |
| 1173 | id = "tube-40x20x1.6-200" |
| 1174 | title = "Light rectangular tube 40 × 20 × 1.6, 200 mm" |
| 1175 | params = { width = 40, height = 20, wall = 1.6, length = 200, corners = "sharp", material = "unspecified" } |
| 1176 | aliases = ["rectangular tube 40x20x1.6 200 mm", "40x20 tube 200 mm", "box section 40 x 20 x 1.6"] |
| 1177 | standard = "step.parts generic tube model" |
| 1178 | |
| 1179 | [[presets]] |
| 1180 | id = "tube-40x20x1.6-250" |
| 1181 | title = "Light rectangular tube 40 × 20 × 1.6, 250 mm" |
| 1182 | params = { width = 40, height = 20, wall = 1.6, length = 250, corners = "sharp", material = "unspecified" } |
| 1183 | aliases = ["rectangular tube 40x20x1.6 250 mm", "40x20 tube 250 mm", "box section 40 x 20 x 1.6"] |
| 1184 | standard = "step.parts generic tube model" |
| 1185 | |
| 1186 | [[presets]] |
| 1187 | id = "tube-40x20x1.6-300" |
| 1188 | title = "Light rectangular tube 40 × 20 × 1.6, 300 mm" |
| 1189 | params = { width = 40, height = 20, wall = 1.6, length = 300, corners = "sharp", material = "unspecified" } |
| 1190 | aliases = ["rectangular tube 40x20x1.6 300 mm", "40x20 tube 300 mm", "box section 40 x 20 x 1.6"] |
| 1191 | standard = "step.parts generic tube model" |
| 1192 | |
| 1193 | [[presets]] |
| 1194 | id = "tube-40x20x1.6-400" |
| 1195 | title = "Light rectangular tube 40 × 20 × 1.6, 400 mm" |
| 1196 | params = { width = 40, height = 20, wall = 1.6, length = 400, corners = "sharp", material = "unspecified" } |
| 1197 | aliases = ["rectangular tube 40x20x1.6 400 mm", "40x20 tube 400 mm", "box section 40 x 20 x 1.6"] |
| 1198 | standard = "step.parts generic tube model" |
| 1199 | |
| 1200 | [[presets]] |
| 1201 | id = "tube-40x20x1.6-500" |
| 1202 | title = "Light rectangular tube 40 × 20 × 1.6, 500 mm" |
| 1203 | params = { width = 40, height = 20, wall = 1.6, length = 500, corners = "sharp", material = "unspecified" } |
| 1204 | aliases = ["rectangular tube 40x20x1.6 500 mm", "40x20 tube 500 mm", "box section 40 x 20 x 1.6"] |
| 1205 | standard = "step.parts generic tube model" |
| 1206 | |
| 1207 | [[presets]] |
| 1208 | id = "tube-40x20x1.6-600" |
| 1209 | title = "Light rectangular tube 40 × 20 × 1.6, 600 mm" |
| 1210 | params = { width = 40, height = 20, wall = 1.6, length = 600, corners = "sharp", material = "unspecified" } |
| 1211 | aliases = ["rectangular tube 40x20x1.6 600 mm", "40x20 tube 600 mm", "box section 40 x 20 x 1.6"] |
| 1212 | standard = "step.parts generic tube model" |
| 1213 | |
| 1214 | [[presets]] |
| 1215 | id = "tube-40x20x1.6-750" |
| 1216 | title = "Light rectangular tube 40 × 20 × 1.6, 750 mm" |
| 1217 | params = { width = 40, height = 20, wall = 1.6, length = 750, corners = "sharp", material = "unspecified" } |
| 1218 | aliases = ["rectangular tube 40x20x1.6 750 mm", "40x20 tube 750 mm", "box section 40 x 20 x 1.6"] |
| 1219 | standard = "step.parts generic tube model" |
| 1220 | |
| 1221 | [[presets]] |
| 1222 | id = "tube-40x20x1.6-1000" |
| 1223 | title = "Light rectangular tube 40 × 20 × 1.6, 1000 mm" |
| 1224 | params = { width = 40, height = 20, wall = 1.6, length = 1000, corners = "sharp", material = "unspecified" } |
| 1225 | aliases = ["rectangular tube 40x20x1.6 1000 mm", "40x20 tube 1000 mm", "box section 40 x 20 x 1.6"] |
| 1226 | standard = "step.parts generic tube model" |
| 1227 | |
| 1228 | [[presets]] |
| 1229 | id = "tube-60x30x2.4-100" |
| 1230 | title = "Light rectangular tube 60 × 30 × 2.4, 100 mm" |
| 1231 | params = { width = 60, height = 30, wall = 2.4, length = 100, corners = "sharp", material = "unspecified" } |
| 1232 | aliases = ["rectangular tube 60x30x2.4 100 mm", "60x30 tube 100 mm", "box section 60 x 30 x 2.4"] |
| 1233 | standard = "step.parts generic tube model" |
| 1234 | |
| 1235 | [[presets]] |
| 1236 | id = "tube-60x30x2.4-150" |
| 1237 | title = "Light rectangular tube 60 × 30 × 2.4, 150 mm" |
| 1238 | params = { width = 60, height = 30, wall = 2.4, length = 150, corners = "sharp", material = "unspecified" } |
| 1239 | aliases = ["rectangular tube 60x30x2.4 150 mm", "60x30 tube 150 mm", "box section 60 x 30 x 2.4"] |
| 1240 | standard = "step.parts generic tube model" |
| 1241 | |
| 1242 | [[presets]] |
| 1243 | id = "tube-60x30x2.4-200" |
| 1244 | title = "Light rectangular tube 60 × 30 × 2.4, 200 mm" |
| 1245 | params = { width = 60, height = 30, wall = 2.4, length = 200, corners = "sharp", material = "unspecified" } |
| 1246 | aliases = ["rectangular tube 60x30x2.4 200 mm", "60x30 tube 200 mm", "box section 60 x 30 x 2.4"] |
| 1247 | standard = "step.parts generic tube model" |
| 1248 | |
| 1249 | [[presets]] |
| 1250 | id = "tube-60x30x2.4-250" |
| 1251 | title = "Light rectangular tube 60 × 30 × 2.4, 250 mm" |
| 1252 | params = { width = 60, height = 30, wall = 2.4, length = 250, corners = "sharp", material = "unspecified" } |
| 1253 | aliases = ["rectangular tube 60x30x2.4 250 mm", "60x30 tube 250 mm", "box section 60 x 30 x 2.4"] |
| 1254 | standard = "step.parts generic tube model" |
| 1255 | |
| 1256 | [[presets]] |
| 1257 | id = "tube-60x30x2.4-300" |
| 1258 | title = "Light rectangular tube 60 × 30 × 2.4, 300 mm" |
| 1259 | params = { width = 60, height = 30, wall = 2.4, length = 300, corners = "sharp", material = "unspecified" } |
| 1260 | aliases = ["rectangular tube 60x30x2.4 300 mm", "60x30 tube 300 mm", "box section 60 x 30 x 2.4"] |
| 1261 | standard = "step.parts generic tube model" |
| 1262 | |
| 1263 | [[presets]] |
| 1264 | id = "tube-60x30x2.4-400" |
| 1265 | title = "Light rectangular tube 60 × 30 × 2.4, 400 mm" |
| 1266 | params = { width = 60, height = 30, wall = 2.4, length = 400, corners = "sharp", material = "unspecified" } |
| 1267 | aliases = ["rectangular tube 60x30x2.4 400 mm", "60x30 tube 400 mm", "box section 60 x 30 x 2.4"] |
| 1268 | standard = "step.parts generic tube model" |
| 1269 | |
| 1270 | [[presets]] |
| 1271 | id = "tube-60x30x2.4-500" |
| 1272 | title = "Light rectangular tube 60 × 30 × 2.4, 500 mm" |
| 1273 | params = { width = 60, height = 30, wall = 2.4, length = 500, corners = "sharp", material = "unspecified" } |
| 1274 | aliases = ["rectangular tube 60x30x2.4 500 mm", "60x30 tube 500 mm", "box section 60 x 30 x 2.4"] |
| 1275 | standard = "step.parts generic tube model" |
| 1276 | |
| 1277 | [[presets]] |
| 1278 | id = "tube-60x30x2.4-600" |
| 1279 | title = "Light rectangular tube 60 × 30 × 2.4, 600 mm" |
| 1280 | params = { width = 60, height = 30, wall = 2.4, length = 600, corners = "sharp", material = "unspecified" } |
| 1281 | aliases = ["rectangular tube 60x30x2.4 600 mm", "60x30 tube 600 mm", "box section 60 x 30 x 2.4"] |
| 1282 | standard = "step.parts generic tube model" |
| 1283 | |
| 1284 | [[presets]] |
| 1285 | id = "tube-60x30x2.4-750" |
| 1286 | title = "Light rectangular tube 60 × 30 × 2.4, 750 mm" |
| 1287 | params = { width = 60, height = 30, wall = 2.4, length = 750, corners = "sharp", material = "unspecified" } |
| 1288 | aliases = ["rectangular tube 60x30x2.4 750 mm", "60x30 tube 750 mm", "box section 60 x 30 x 2.4"] |
| 1289 | standard = "step.parts generic tube model" |
| 1290 | |
| 1291 | [[presets]] |
| 1292 | id = "tube-60x30x2.4-1000" |
| 1293 | title = "Light rectangular tube 60 × 30 × 2.4, 1000 mm" |
| 1294 | params = { width = 60, height = 30, wall = 2.4, length = 1000, corners = "sharp", material = "unspecified" } |
| 1295 | aliases = ["rectangular tube 60x30x2.4 1000 mm", "60x30 tube 1000 mm", "box section 60 x 30 x 2.4"] |
| 1296 | standard = "step.parts generic tube model" |
| 1297 |
Hollow section (EN 10219-2 SHS / RHS)
Cold-formed welded structural square (SHS) and rectangular (RHS) hollow sections at any size, wall and length; and
sharp-cornered light tubes (corners = "sharp"), the catalogue's generic square and rectangular tubes.
Geometry
Outside width B (width) along X, outside height H (height) along Y, wall thickness T (wall),
centred on the origin and extruded along +Z by length. The corners are rounded with the outside radius ro and the
inside radius ri that EN 10219-2 uses to calculate the sectional properties of its tables:
| Wall T | ro | ri |
|---|---|---|
| T ≤ 6 mm | 2.0 T | 1.0 T |
| 6 mm < T ≤ 10 mm | 2.5 T | 1.5 T |
| T > 10 mm | 3.0 T | 2.0 T |
so the section area and mass agree with the tables. (Real corner profiles vary within the standard's tolerance:
1.6 T to 2.4 T outside for T ≤ 6 mm, 2.0 T to 3.0 T for 6 < T ≤ 10 mm, 2.4 T to 3.6 T above.) With corners = "sharp" the corners are square inside and out.
Parameters
| Parameter | Meaning |
|---|---|
width |
Outside width B, mm |
height |
Outside height H, mm (equal to B for a square section) |
wall |
Wall thickness T, mm |
length |
Length, mm |
material |
steel-s355 (S355J2H), steel-s235 (S235JRH), EN 10219-1; stainless-304 (1.4301); or unspecified (no material assigned) |
corners |
en-10219 (the radii above) or sharp |
Source
EN 10219-2:2006, Cold formed welded structural hollow sections of non-alloy and fine grain steels — Part 2: Tolerances, dimensions and sectional properties, read from a full copy of BS EN 10219-2:2006 (https://icdn.tradew.com/file/201801/1572618/pdf/6800507.pdf):
- corner radii for the sectional properties: Annex B, clause B.3 (printed p. 21): outside ro = 2.0T / 2.5T / 3.0T and inside ri = 1.0T / 1.5T / 2.0T for T ≤ 6, 6 < T ≤ 10 and T > 10 mm;
- tolerance on the external corner profile: Table 3 (1.6T to 2.4T, 2.0T to 3.0T, 2.4T to 3.6T); the same in the 2019 edition's Table 3 (SIST EN 10219-2:2019 preview, https://cdn.standards.iteh.ai/samples/38063/99682514fcf94faabd079f41b1a7854e/SIST-EN-10219-2-2019.pdf);
- sizes B × H × T: Table C.2 (square) and Table C.3 (rectangular); every preset is a row of these tables.
The radii rule is cross-checked by Roymech's cold-formed SHS / RHS tables (https://roymech.org/Useful_Tables/Sections/SHS_cf.html, https://roymech.org/Useful_Tables/Sections/RHS_cf.html). EN 10219-2 was revised in 2019 (formulae then in Annex A, tables in Annex B); its radii text was not available, so the edition matched is 2006.
Generic square tubes of the catalogue (side and piece length only) become presets only where EN 10219-2 lists the section their own reference model has: 25 × 25 × 2 (EN 10219-2:2006 Table C.2; copy consulted: https://icdn.tradew.com/file/201801/1572618/pdf/6800507.pdf, page 29), at the entry's length. Their other sizes (10 × 1, 15 × 1.2, 20 × 1.6, 30 × 2.4, 40 × 3.2) are not EN 10219-2 sections: they are sharp-cornered presets measured from their own models (below).
Sources: generic light tubes
No standard covers the catalogue's generic light tubes (their walls are in neither EN 10219-2 nor EN 10305-5).
Their geometry was measured from the published reference models below: each model's mid-length section (outside
extents, inside extents; wall = the difference / 2; all corners square) and is checked preset by preset against its
own model (bounding box within 0.05 mm, 0.5 % over 100 mm, and volume within 2 %). Their models name no material, so
these presets have material = "unspecified".
| Tube | Wall | Tube | Wall | |
|---|---|---|---|---|
| 10 × 10 | 1.0 | 20 × 10 | 1.0 | |
| 15 × 15 | 1.2 | 30 × 15 | 1.2 | |
| 20 × 20 | 1.6 | 40 × 20 | 1.6 | |
| 30 × 30 | 2.4 | 60 × 30 | 2.4 | |
| 40 × 40 | 3.2 |
- step.parts,
square_tube_side<s>_l<length>andrectangular_tube_size<w>x<h>_l<length>(https://www.step.parts, repository https://github.com/earthtojake/step.parts, commit c6113328,catalog/step/): step.parts' own "analytic simplified" models, original project material under the repository's MIT licence (© 2026 earthtojake).
Simplifications (the models'): square corners, no weld seam.
Preset list: sizes of the step.parts catalogue (MIT), see library/NOTICE.md; EN 10219 presets are 1000 mm long,
generic ones have the catalogue's length.
| 1 | # Hollow section (EN 10219-2 SHS / RHS) |
| 2 | |
| 3 | Cold-formed welded structural square (SHS) and rectangular (RHS) hollow sections at any size, wall and length; and |
| 4 | sharp-cornered light tubes (`corners = "sharp"`), the catalogue's generic square and rectangular tubes. |
| 5 | |
| 6 | ## Geometry |
| 7 | |
| 8 | Outside width **B** (`width`) along X, outside height **H** (`height`) along Y, wall thickness **T** (`wall`), |
| 9 | centred on the origin and extruded along +Z by `length`. The corners are rounded with the outside radius ro and the |
| 10 | inside radius ri that EN 10219-2 uses to calculate the sectional properties of its tables: |
| 11 | |
| 12 | | Wall T | ro | ri | |
| 13 | |---|---|---| |
| 14 | | T ≤ 6 mm | 2.0 T | 1.0 T | |
| 15 | | 6 mm < T ≤ 10 mm | 2.5 T | 1.5 T | |
| 16 | | T > 10 mm | 3.0 T | 2.0 T | |
| 17 | |
| 18 | so the section area and mass agree with the tables. (Real corner profiles vary within the standard's tolerance: |
| 19 | 1.6 T to 2.4 T outside for T ≤ 6 mm, 2.0 T to 3.0 T for 6 < T ≤ 10 mm, 2.4 T to 3.6 T above.) With `corners = |
| 20 | "sharp"` the corners are square inside and out. |
| 21 | |
| 22 | ## Parameters |
| 23 | |
| 24 | | Parameter | Meaning | |
| 25 | |---|---| |
| 26 | | `width` | Outside width B, mm | |
| 27 | | `height` | Outside height H, mm (equal to B for a square section) | |
| 28 | | `wall` | Wall thickness T, mm | |
| 29 | | `length` | Length, mm | |
| 30 | | `material` | `steel-s355` (S355J2H), `steel-s235` (S235JRH), EN 10219-1; `stainless-304` (1.4301); or `unspecified` (no material assigned) | |
| 31 | | `corners` | `en-10219` (the radii above) or `sharp` | |
| 32 | |
| 33 | ## Source |
| 34 | |
| 35 | EN 10219-2:2006, *Cold formed welded structural hollow sections of non-alloy and fine grain steels — Part 2: |
| 36 | Tolerances, dimensions and sectional properties*, read from a full copy of BS EN 10219-2:2006 (<https://icdn.tradew.com/file/201801/1572618/pdf/6800507.pdf>): |
| 37 | |
| 38 | - corner radii for the sectional properties: Annex B, clause B.3 (printed p. 21): outside ro = 2.0T / 2.5T / 3.0T and |
| 39 | inside ri = 1.0T / 1.5T / 2.0T for T ≤ 6, 6 < T ≤ 10 and T > 10 mm; |
| 40 | - tolerance on the external corner profile: Table 3 (1.6T to 2.4T, 2.0T to 3.0T, 2.4T to 3.6T); the same in the 2019 |
| 41 | edition's Table 3 (SIST EN 10219-2:2019 preview, <https://cdn.standards.iteh.ai/samples/38063/99682514fcf94faabd079f41b1a7854e/SIST-EN-10219-2-2019.pdf>); |
| 42 | - sizes B × H × T: Table C.2 (square) and Table C.3 (rectangular); every preset is a row of these tables. |
| 43 | |
| 44 | The radii rule is cross-checked by Roymech's cold-formed SHS / RHS tables (<https://roymech.org/Useful_Tables/Sections/SHS_cf.html>, |
| 45 | <https://roymech.org/Useful_Tables/Sections/RHS_cf.html>). EN 10219-2 was revised in 2019 (formulae then in Annex A, |
| 46 | tables in Annex B); its radii text was not available, so the edition matched is 2006. |
| 47 | |
| 48 | Generic square tubes of the catalogue (side and piece length only) become presets only where EN 10219-2 lists the |
| 49 | section their own reference model has: 25 × 25 × 2 (EN 10219-2:2006 Table C.2; copy consulted: |
| 50 | https://icdn.tradew.com/file/201801/1572618/pdf/6800507.pdf, page 29), at the entry's length. Their other sizes |
| 51 | (10 × 1, 15 × 1.2, 20 × 1.6, 30 × 2.4, 40 × 3.2) are not EN 10219-2 sections: they are sharp-cornered presets |
| 52 | measured from their own models (below). |
| 53 | |
| 54 | ## Sources: generic light tubes |
| 55 | |
| 56 | No standard covers the catalogue's generic light tubes (their walls are in neither EN 10219-2 nor EN 10305-5). |
| 57 | **Their geometry was measured from the published reference models** below: each model's mid-length section (outside |
| 58 | extents, inside extents; wall = the difference / 2; all corners square) and is checked preset by preset against its |
| 59 | own model (bounding box within 0.05 mm, 0.5 % over 100 mm, and volume within 2 %). Their models name no material, so |
| 60 | these presets have `material = "unspecified"`. |
| 61 | |
| 62 | | Tube | Wall | | Tube | Wall | |
| 63 | |---|---|---|---|---| |
| 64 | | 10 × 10 | 1.0 | | 20 × 10 | 1.0 | |
| 65 | | 15 × 15 | 1.2 | | 30 × 15 | 1.2 | |
| 66 | | 20 × 20 | 1.6 | | 40 × 20 | 1.6 | |
| 67 | | 30 × 30 | 2.4 | | 60 × 30 | 2.4 | |
| 68 | | 40 × 40 | 3.2 | | | | |
| 69 | |
| 70 | - **step.parts**, `square_tube_side<s>_l<length>` and `rectangular_tube_size<w>x<h>_l<length>` |
| 71 | (https://www.step.parts, repository https://github.com/earthtojake/step.parts, commit c6113328, `catalog/step/`): |
| 72 | step.parts' own "analytic simplified" models, original project material under the repository's **MIT** licence |
| 73 | (© 2026 earthtojake). |
| 74 | |
| 75 | Simplifications (the models'): square corners, no weld seam. |
| 76 | |
| 77 | Preset list: sizes of the step.parts catalogue (MIT), see `library/NOTICE.md`; EN 10219 presets are 1000 mm long, |
| 78 | generic ones have the catalogue's length. |
| 79 |
Cold-formed square or rectangular hollow section to EN 10219-2: outside width B along X, height H along Y, wall thickness T, centred on the origin and extruded along +Z by the length. Corner radii are those EN 10219-2 uses for the sectional properties of its tables (outside / inside: 2T / T up to 6 mm wall, 2.5T / 1.5T up to 10 mm, 3T / 2T above), so mass and section area match the tables. Presets: catalogue sizes, 1000 mm long. Also sharp-cornered light tubes (corners = "sharp"): the catalogue's generic square and rectangular tubes, measured from step.parts' published models (MIT).
Hollow section (EN 10219-2 SHS / RHS)
Cold-formed welded structural square (SHS) and rectangular (RHS) hollow sections at any size, wall and length; and
sharp-cornered light tubes (corners = "sharp"), the catalogue's generic square and rectangular tubes.
Geometry
Outside width B (width) along X, outside height H (height) along Y, wall thickness T (wall),
centred on the origin and extruded along +Z by length. The corners are rounded with the outside radius ro and the
inside radius ri that EN 10219-2 uses to calculate the sectional properties of its tables:
| Wall T | ro | ri |
|---|---|---|
| T ≤ 6 mm | 2.0 T | 1.0 T |
| 6 mm < T ≤ 10 mm | 2.5 T | 1.5 T |
| T > 10 mm | 3.0 T | 2.0 T |
so the section area and mass agree with the tables. (Real corner profiles vary within the standard's tolerance:
1.6 T to 2.4 T outside for T ≤ 6 mm, 2.0 T to 3.0 T for 6 < T ≤ 10 mm, 2.4 T to 3.6 T above.) With corners = "sharp" the corners are square inside and out.
Parameters
| Parameter | Meaning |
|---|---|
width |
Outside width B, mm |
height |
Outside height H, mm (equal to B for a square section) |
wall |
Wall thickness T, mm |
length |
Length, mm |
material |
steel-s355 (S355J2H), steel-s235 (S235JRH), EN 10219-1; stainless-304 (1.4301); or unspecified (no material assigned) |
corners |
en-10219 (the radii above) or sharp |
Source
EN 10219-2:2006, Cold formed welded structural hollow sections of non-alloy and fine grain steels — Part 2: Tolerances, dimensions and sectional properties, read from a full copy of BS EN 10219-2:2006 (https://icdn.tradew.com/file/201801/1572618/pdf/6800507.pdf):
- corner radii for the sectional properties: Annex B, clause B.3 (printed p. 21): outside ro = 2.0T / 2.5T / 3.0T and inside ri = 1.0T / 1.5T / 2.0T for T ≤ 6, 6 < T ≤ 10 and T > 10 mm;
- tolerance on the external corner profile: Table 3 (1.6T to 2.4T, 2.0T to 3.0T, 2.4T to 3.6T); the same in the 2019 edition's Table 3 (SIST EN 10219-2:2019 preview, https://cdn.standards.iteh.ai/samples/38063/99682514fcf94faabd079f41b1a7854e/SIST-EN-10219-2-2019.pdf);
- sizes B × H × T: Table C.2 (square) and Table C.3 (rectangular); every preset is a row of these tables.
The radii rule is cross-checked by Roymech's cold-formed SHS / RHS tables (https://roymech.org/Useful_Tables/Sections/SHS_cf.html, https://roymech.org/Useful_Tables/Sections/RHS_cf.html). EN 10219-2 was revised in 2019 (formulae then in Annex A, tables in Annex B); its radii text was not available, so the edition matched is 2006.
Generic square tubes of the catalogue (side and piece length only) become presets only where EN 10219-2 lists the section their own reference model has: 25 × 25 × 2 (EN 10219-2:2006 Table C.2; copy consulted: https://icdn.tradew.com/file/201801/1572618/pdf/6800507.pdf, page 29), at the entry's length. Their other sizes (10 × 1, 15 × 1.2, 20 × 1.6, 30 × 2.4, 40 × 3.2) are not EN 10219-2 sections: they are sharp-cornered presets measured from their own models (below).
Sources: generic light tubes
No standard covers the catalogue's generic light tubes (their walls are in neither EN 10219-2 nor EN 10305-5).
Their geometry was measured from the published reference models below: each model's mid-length section (outside
extents, inside extents; wall = the difference / 2; all corners square) and is checked preset by preset against its
own model (bounding box within 0.05 mm, 0.5 % over 100 mm, and volume within 2 %). Their models name no material, so
these presets have material = "unspecified".
| Tube | Wall | Tube | Wall | |
|---|---|---|---|---|
| 10 × 10 | 1.0 | 20 × 10 | 1.0 | |
| 15 × 15 | 1.2 | 30 × 15 | 1.2 | |
| 20 × 20 | 1.6 | 40 × 20 | 1.6 | |
| 30 × 30 | 2.4 | 60 × 30 | 2.4 | |
| 40 × 40 | 3.2 |
- step.parts,
square_tube_side<s>_l<length>andrectangular_tube_size<w>x<h>_l<length>(https://www.step.parts, repository https://github.com/earthtojake/step.parts, commit c6113328,catalog/step/): step.parts' own "analytic simplified" models, original project material under the repository's MIT licence (© 2026 earthtojake).
Simplifications (the models'): square corners, no weld seam.
Preset list: sizes of the step.parts catalogue (MIT), see library/NOTICE.md; EN 10219 presets are 1000 mm long,
generic ones have the catalogue's length.
-
1.1.0 Latest
Sharp corners (corners = sharp) and an unspecified material added for the generic light tubes 10x10x1 to 60x30x2.4, measured from step.parts' models (MIT); EN 10219 presets unchanged.
Related parts
More #stock
STEVEMIT
steve/angle
Hot-rolled steel angle, equal and unequal legs, EN 10056-1, any length.
STEVEMIT
steve/round-tube
Round tube, any outside diameter, wall and length; presets from EN 10305-1 and EN 10220 sizes.
STEVEMIT
steve/plate
Rectangular plate blank, any width, length and thickness, in common plate and sheet materials.