STEVEMIT
steve/levelling-foot
Levelling foot envelope (round base + threaded stud), M6 to M12, any base diameter and stud length.
STEVEMIT
steve/i-beam
Hot-rolled I and H beams: IPE (DIN 1025-5), HEA (DIN 1025-3) and HEB (DIN 1025-2), any length.
STEVEMIT
steve/hollow-section
Square and rectangular hollow sections (structural tube), EN 10219-2, any size, wall and length.
STEVEMIT
steve/hex-standoff
Hex standoffs M2 to M4, female/female and male/female: Würth WA-SBRII/SBRIE (M2), Harwin R25/R30/R40 (M2.5 to M4).
STEVEMIT
steve/heat-set-insert
Heat-set (heat / ultrasonic) threaded inserts for plastics, SPIROL Series 19, short and long, M2 to M4.
STEVEMIT
steve/flat-washer
Metric flat washers: ISO 7089 / DIN 125, ISO 7091, ISO 7092, ISO 7093-1, DIN 9021, DIN 433, DIN 440 V, DIN 7349.
STEVEMIT
steve/flat-bar
Flat bar / rectangular bar, EN 10058 sizes and plain flat stock, any width, thickness and length.
STEVEMIT
steve/extrusion-accessory
T-slot extrusion accessories (end cap, cover strip, anchor fastener, inside corner connector), 20/30/40 series: simplified.
STEVEMIT
steve/dowel-pin
Parallel pin (dowel pin), ISO 2338 / DIN 7, d 0.6 to 50 mm, any length.
STEVEMIT
steve/deep-groove-ball-bearing
Deep groove ball bearing, metric: 6xx, MR, 60, 62, 63, 68 and 69 series, open, ZZ or 2RS, optional flange.
STEVEMIT
steve/countersunk-screw
Hexagon socket countersunk head screw, ISO 10642 / DIN 7991, M3 to M12, any length, with catalogue sizes as presets.
STEVEMIT
steve/cotter-pin
Cotter pin (split pin), nominal 1 to 5 mm, any length: simplified envelope measured from step.parts' models.
STEVEMIT
steve/conical-spring-washer
Conical spring washer (disc spring) for bolted joints, DIN 6796, M2 to M125.
STEVEMIT
steve/clevis-pin
Clevis pin with head, ISO 2341 / DIN 1444, type A or B (split-pin hole), d 4 to 24 mm, any length.
STEVEMIT
steve/channel
Light C channel (U channel), constant thickness, square corners, any size and length.
STEVEMIT
steve/captive-panel-screw
Captive panel screw envelope, M3 to M5, any length: shank and round knob (simplified).
STEVEMIT
steve/button-head-screw
Hexagon socket button head screw, ISO 7380-1, M3 to M16, any length, with catalogue sizes as presets.
STEVEMIT
steve/hex-head-screw
Hexagon head screw, fully threaded, ISO 4017 / DIN 933, M1.6 to M36, any length, with catalogue sizes as presets.
STEVEMIT
steve/angle
Hot-rolled steel angle, equal and unequal legs, EN 10056-1, any length.
STEVEMIT
steve/pan-head-screw
Pan head screw with cross recess, ISO 7045, M2 to M8, any length.
STEVEMIT
steve/hex-nut
Hex nut, ISO 4032, M2 to M12.