steve/levelling-foot

Levelling foot envelope (round base + threaded stud), M6 to M12, any base diameter and stud length.

v1.0.0 Latest STEVE MIT 0

Open in STEVE

Isometric

Parameters

Preset20 sizes

Stud thread

M6M8M10M12

Base diameter10–200 mm

Stud length5–300 mm

Above the base.

Material3 options

Defaults built

part.py 36 lines · Python · STEVE runtime · checked

Download

"""Levelling foot envelope: a round base and a threaded stud (drawn at its nominal diameter), as step.parts' published

models draw it, threads M6 to M12, base diameters 20 to 50 mm (any).

The base (diameter `base_diameter`, thickness BASE_THICKNESS) sits on the XY plane, centred on the origin; the stud

rises from its top along +Z, `stud_length` long. The swivel joint, the rubber pad and the nut are not modelled: the

models draw every style with this same envelope.

"""

from steve import Model

thread = "M8" # Stud thread

base_diameter = 30 # mm Base diameter

stud_length = 25 # mm Stud length (above the base)

material = "unspecified" # Material

# mm, measured on step.parts' models leveling_foot_m<d>_d<D> (cylinders of their two solids: base radius D/2 and 5 mm

# thick in every model; stud radius = half the thread's nominal diameter, 25 mm long above the base)

BASE_THICKNESS = 5.0

STUDS = {"M6": 6.0, "M8": 8.0, "M10": 10.0, "M12": 12.0}

MATERIALS = {

"unspecified": (None, None), # the models name no material

"steel": ("steel-generic", "#9da2a8"),

"stainless-304": ("stainless-304", "#c9ccd0"),

}

d = STUDS[thread]

if base_diameter <= d:

raise ValueError("The base must be wider than the stud.")

material_id, colour = MATERIALS[material]

model = Model()

model.cylinder("base", base_diameter / 2, BASE_THICKNESS, name="Base")

model.cylinder("stud", d / 2, stud_length, at=(0, 0, BASE_THICKNESS), op="join", name="Stud")

if material_id:

model.material(material_id, color=colour)

result = model.result()

"""Levelling foot envelope: a round base and a threaded stud (drawn at its nominal diameter), as step.parts' published
models draw it, threads M6 to M12, base diameters 20 to 50 mm (any).

The base (diameter `base_diameter`, thickness BASE_THICKNESS) sits on the XY plane, centred on the origin; the stud
rises from its top along +Z, `stud_length` long. The swivel joint, the rubber pad and the nut are not modelled: the
models draw every style with this same envelope.
"""
from steve import Model

thread = "M8"  # Stud thread
base_diameter = 30  # mm Base diameter
stud_length = 25  # mm Stud length (above the base)
material = "unspecified"  # Material

# mm, measured on step.parts' models leveling_foot_m<d>_d<D> (cylinders of their two solids: base radius D/2 and 5 mm
# thick in every model; stud radius = half the thread's nominal diameter, 25 mm long above the base)
BASE_THICKNESS = 5.0
STUDS = {"M6": 6.0, "M8": 8.0, "M10": 10.0, "M12": 12.0}
MATERIALS = {
    "unspecified": (None, None),   # the models name no material
    "steel": ("steel-generic", "#9da2a8"),
    "stainless-304": ("stainless-304", "#c9ccd0"),
}

d = STUDS[thread]
if base_diameter <= d:
    raise ValueError("The base must be wider than the stud.")
material_id, colour = MATERIALS[material]

model = Model()
model.cylinder("base", base_diameter / 2, BASE_THICKNESS, name="Base")
model.cylinder("stud", d / 2, stud_length, at=(0, 0, BASE_THICKNESS), op="join", name="Stud")
if material_id:
    model.material(material_id, color=colour)
result = model.result()

pypart.toml 181 lines · TOML

Download

name = "steve/levelling-foot"

version = "1.0.0"

runtime = "steve"

license = "MIT"

summary = "Levelling foot envelope (round base + threaded stud), M6 to M12, any base diameter and stud length."

description = """A levelling foot envelope for assemblies: a round base 5 mm thick and a threaded stud (drawn at its \

nominal diameter), threads M6 to M12, base diameter and stud length free. Measured from step.parts' published models \

(MIT), which draw fixed, swivel and rubber-pad feet with this same envelope; no maker or standard is behind them.

Base on the XY plane centred on the origin, stud along +Z. Dimensions and attribution: see the README."""

tags = ["levelling-foot", "leveling-foot", "foot", "machine-foot", "hardware", "metric"]

[parameters.thread]

type = "choice"

default = "M8"

choices = ["M6", "M8", "M10", "M12"]

label = "Stud thread"

[parameters.base_diameter]

type = "number"

default = 30

min = 10

max = 200

unit = "mm"

label = "Base diameter"

[parameters.stud_length]

type = "number"

default = 25

min = 5

max = 300

unit = "mm"

label = "Stud length"

description = "Above the base."

[parameters.material]

type = "choice"

default = "unspecified"

choices = ["unspecified", "steel", "stainless-304"]

label = "Material"

[[presets]]

id = "M6-D20"

title = "Levelling foot M6, base Ø20 (envelope)"

params = { thread = "M6", base_diameter = 20, stud_length = 25 }

aliases = ["levelling foot M6 20 mm", "leveling foot M6 d20", "machine foot M6 20", "thread=M6; foot diameter=20 mm; style=leveling_foot", "Levelling foot M6, base Ø20 (envelope)", "swivel levelling foot M6 20 mm", "thread=M6; foot diameter=20 mm; style=swivel_leveling_foot", "rubber pad levelling foot M6 20 mm", "thread=M6; foot diameter=20 mm; style=rubber_pad_leveling_foot"]

standard = "step.parts levelling foot model"

[[presets]]

id = "M6-D25"

title = "Levelling foot M6, base Ø25 (envelope)"

params = { thread = "M6", base_diameter = 25, stud_length = 25 }

aliases = ["levelling foot M6 25 mm", "leveling foot M6 d25", "machine foot M6 25", "thread=M6; foot diameter=25 mm; style=leveling_foot", "Levelling foot M6, base Ø25 (envelope)", "swivel levelling foot M6 25 mm", "thread=M6; foot diameter=25 mm; style=swivel_leveling_foot", "rubber pad levelling foot M6 25 mm", "thread=M6; foot diameter=25 mm; style=rubber_pad_leveling_foot"]

standard = "step.parts levelling foot model"

[[presets]]

id = "M6-D30"

title = "Levelling foot M6, base Ø30 (envelope)"

params = { thread = "M6", base_diameter = 30, stud_length = 25 }

aliases = ["levelling foot M6 30 mm", "leveling foot M6 d30", "machine foot M6 30", "thread=M6; foot diameter=30 mm; style=leveling_foot", "Levelling foot M6, base Ø30 (envelope)", "swivel levelling foot M6 30 mm", "thread=M6; foot diameter=30 mm; style=swivel_leveling_foot", "rubber pad levelling foot M6 30 mm", "thread=M6; foot diameter=30 mm; style=rubber_pad_leveling_foot"]

standard = "step.parts levelling foot model"

[[presets]]

id = "M6-D40"

title = "Levelling foot M6, base Ø40 (envelope)"

params = { thread = "M6", base_diameter = 40, stud_length = 25 }

aliases = ["levelling foot M6 40 mm", "leveling foot M6 d40", "machine foot M6 40", "thread=M6; foot diameter=40 mm; style=leveling_foot", "Levelling foot M6, base Ø40 (envelope)", "swivel levelling foot M6 40 mm", "thread=M6; foot diameter=40 mm; style=swivel_leveling_foot", "rubber pad levelling foot M6 40 mm", "thread=M6; foot diameter=40 mm; style=rubber_pad_leveling_foot"]

standard = "step.parts levelling foot model"

[[presets]]

id = "M6-D50"

title = "Levelling foot M6, base Ø50 (envelope)"

params = { thread = "M6", base_diameter = 50, stud_length = 25 }

aliases = ["levelling foot M6 50 mm", "leveling foot M6 d50", "machine foot M6 50", "thread=M6; foot diameter=50 mm; style=leveling_foot", "Levelling foot M6, base Ø50 (envelope)", "swivel levelling foot M6 50 mm", "thread=M6; foot diameter=50 mm; style=swivel_leveling_foot", "rubber pad levelling foot M6 50 mm", "thread=M6; foot diameter=50 mm; style=rubber_pad_leveling_foot"]

standard = "step.parts levelling foot model"

[[presets]]

id = "M8-D20"

title = "Levelling foot M8, base Ø20 (envelope)"

params = { thread = "M8", base_diameter = 20, stud_length = 25 }

aliases = ["levelling foot M8 20 mm", "leveling foot M8 d20", "machine foot M8 20", "thread=M8; foot diameter=20 mm; style=leveling_foot", "Levelling foot M8, base Ø20 (envelope)", "swivel levelling foot M8 20 mm", "thread=M8; foot diameter=20 mm; style=swivel_leveling_foot", "rubber pad levelling foot M8 20 mm", "thread=M8; foot diameter=20 mm; style=rubber_pad_leveling_foot"]

standard = "step.parts levelling foot model"

[[presets]]

id = "M8-D25"

title = "Levelling foot M8, base Ø25 (envelope)"

params = { thread = "M8", base_diameter = 25, stud_length = 25 }

aliases = ["levelling foot M8 25 mm", "leveling foot M8 d25", "machine foot M8 25", "thread=M8; foot diameter=25 mm; style=leveling_foot", "Levelling foot M8, base Ø25 (envelope)", "swivel levelling foot M8 25 mm", "thread=M8; foot diameter=25 mm; style=swivel_leveling_foot", "rubber pad levelling foot M8 25 mm", "thread=M8; foot diameter=25 mm; style=rubber_pad_leveling_foot"]

standard = "step.parts levelling foot model"

[[presets]]

id = "M8-D30"

title = "Levelling foot M8, base Ø30 (envelope)"

params = { thread = "M8", base_diameter = 30, stud_length = 25 }

aliases = ["levelling foot M8 30 mm", "leveling foot M8 d30", "machine foot M8 30", "thread=M8; foot diameter=30 mm; style=leveling_foot", "Levelling foot M8, base Ø30 (envelope)", "swivel levelling foot M8 30 mm", "thread=M8; foot diameter=30 mm; style=swivel_leveling_foot", "rubber pad levelling foot M8 30 mm", "thread=M8; foot diameter=30 mm; style=rubber_pad_leveling_foot"]

standard = "step.parts levelling foot model"

[[presets]]

id = "M8-D40"

100

title = "Levelling foot M8, base Ø40 (envelope)"

101

params = { thread = "M8", base_diameter = 40, stud_length = 25 }

102

aliases = ["levelling foot M8 40 mm", "leveling foot M8 d40", "machine foot M8 40", "thread=M8; foot diameter=40 mm; style=leveling_foot", "Levelling foot M8, base Ø40 (envelope)", "swivel levelling foot M8 40 mm", "thread=M8; foot diameter=40 mm; style=swivel_leveling_foot", "rubber pad levelling foot M8 40 mm", "thread=M8; foot diameter=40 mm; style=rubber_pad_leveling_foot"]

103

standard = "step.parts levelling foot model"

104

105

[[presets]]

106

id = "M8-D50"

107

title = "Levelling foot M8, base Ø50 (envelope)"

108

params = { thread = "M8", base_diameter = 50, stud_length = 25 }

109

aliases = ["levelling foot M8 50 mm", "leveling foot M8 d50", "machine foot M8 50", "thread=M8; foot diameter=50 mm; style=leveling_foot", "Levelling foot M8, base Ø50 (envelope)", "swivel levelling foot M8 50 mm", "thread=M8; foot diameter=50 mm; style=swivel_leveling_foot", "rubber pad levelling foot M8 50 mm", "thread=M8; foot diameter=50 mm; style=rubber_pad_leveling_foot"]

110

standard = "step.parts levelling foot model"

111

112

[[presets]]

113

id = "M10-D20"

114

title = "Levelling foot M10, base Ø20 (envelope)"

115

params = { thread = "M10", base_diameter = 20, stud_length = 25 }

116

aliases = ["levelling foot M10 20 mm", "leveling foot M10 d20", "machine foot M10 20", "thread=M10; foot diameter=20 mm; style=leveling_foot", "Levelling foot M10, base Ø20 (envelope)", "swivel levelling foot M10 20 mm", "thread=M10; foot diameter=20 mm; style=swivel_leveling_foot", "rubber pad levelling foot M10 20 mm", "thread=M10; foot diameter=20 mm; style=rubber_pad_leveling_foot"]

117

standard = "step.parts levelling foot model"

118

119

[[presets]]

120

id = "M10-D25"

121

title = "Levelling foot M10, base Ø25 (envelope)"

122

params = { thread = "M10", base_diameter = 25, stud_length = 25 }

123

aliases = ["levelling foot M10 25 mm", "leveling foot M10 d25", "machine foot M10 25", "thread=M10; foot diameter=25 mm; style=leveling_foot", "Levelling foot M10, base Ø25 (envelope)", "swivel levelling foot M10 25 mm", "thread=M10; foot diameter=25 mm; style=swivel_leveling_foot", "rubber pad levelling foot M10 25 mm", "thread=M10; foot diameter=25 mm; style=rubber_pad_leveling_foot"]

124

standard = "step.parts levelling foot model"

125

126

[[presets]]

127

id = "M10-D30"

128

title = "Levelling foot M10, base Ø30 (envelope)"

129

params = { thread = "M10", base_diameter = 30, stud_length = 25 }

130

aliases = ["levelling foot M10 30 mm", "leveling foot M10 d30", "machine foot M10 30", "thread=M10; foot diameter=30 mm; style=leveling_foot", "Levelling foot M10, base Ø30 (envelope)", "swivel levelling foot M10 30 mm", "thread=M10; foot diameter=30 mm; style=swivel_leveling_foot", "rubber pad levelling foot M10 30 mm", "thread=M10; foot diameter=30 mm; style=rubber_pad_leveling_foot"]

131

standard = "step.parts levelling foot model"

132

133

[[presets]]

134

id = "M10-D40"

135

title = "Levelling foot M10, base Ø40 (envelope)"

136

params = { thread = "M10", base_diameter = 40, stud_length = 25 }

137

aliases = ["levelling foot M10 40 mm", "leveling foot M10 d40", "machine foot M10 40", "thread=M10; foot diameter=40 mm; style=leveling_foot", "Levelling foot M10, base Ø40 (envelope)", "swivel levelling foot M10 40 mm", "thread=M10; foot diameter=40 mm; style=swivel_leveling_foot", "rubber pad levelling foot M10 40 mm", "thread=M10; foot diameter=40 mm; style=rubber_pad_leveling_foot"]

138

standard = "step.parts levelling foot model"

139

140

[[presets]]

141

id = "M10-D50"

142

title = "Levelling foot M10, base Ø50 (envelope)"

143

params = { thread = "M10", base_diameter = 50, stud_length = 25 }

144

aliases = ["levelling foot M10 50 mm", "leveling foot M10 d50", "machine foot M10 50", "thread=M10; foot diameter=50 mm; style=leveling_foot", "Levelling foot M10, base Ø50 (envelope)", "swivel levelling foot M10 50 mm", "thread=M10; foot diameter=50 mm; style=swivel_leveling_foot", "rubber pad levelling foot M10 50 mm", "thread=M10; foot diameter=50 mm; style=rubber_pad_leveling_foot"]

145

standard = "step.parts levelling foot model"

146

147

[[presets]]

148

id = "M12-D20"

149

title = "Levelling foot M12, base Ø20 (envelope)"

150

params = { thread = "M12", base_diameter = 20, stud_length = 25 }

151

aliases = ["levelling foot M12 20 mm", "leveling foot M12 d20", "machine foot M12 20", "thread=M12; foot diameter=20 mm; style=leveling_foot", "Levelling foot M12, base Ø20 (envelope)", "swivel levelling foot M12 20 mm", "thread=M12; foot diameter=20 mm; style=swivel_leveling_foot", "rubber pad levelling foot M12 20 mm", "thread=M12; foot diameter=20 mm; style=rubber_pad_leveling_foot"]

152

standard = "step.parts levelling foot model"

153

154

[[presets]]

155

id = "M12-D25"

156

title = "Levelling foot M12, base Ø25 (envelope)"

157

params = { thread = "M12", base_diameter = 25, stud_length = 25 }

158

aliases = ["levelling foot M12 25 mm", "leveling foot M12 d25", "machine foot M12 25", "thread=M12; foot diameter=25 mm; style=leveling_foot", "Levelling foot M12, base Ø25 (envelope)", "swivel levelling foot M12 25 mm", "thread=M12; foot diameter=25 mm; style=swivel_leveling_foot", "rubber pad levelling foot M12 25 mm", "thread=M12; foot diameter=25 mm; style=rubber_pad_leveling_foot"]

159

standard = "step.parts levelling foot model"

160

161

[[presets]]

162

id = "M12-D30"

163

title = "Levelling foot M12, base Ø30 (envelope)"

164

params = { thread = "M12", base_diameter = 30, stud_length = 25 }

165

aliases = ["levelling foot M12 30 mm", "leveling foot M12 d30", "machine foot M12 30", "thread=M12; foot diameter=30 mm; style=leveling_foot", "Levelling foot M12, base Ø30 (envelope)", "swivel levelling foot M12 30 mm", "thread=M12; foot diameter=30 mm; style=swivel_leveling_foot", "rubber pad levelling foot M12 30 mm", "thread=M12; foot diameter=30 mm; style=rubber_pad_leveling_foot"]

166

standard = "step.parts levelling foot model"

167

168

[[presets]]

169

id = "M12-D40"

170

title = "Levelling foot M12, base Ø40 (envelope)"

171

params = { thread = "M12", base_diameter = 40, stud_length = 25 }

172

aliases = ["levelling foot M12 40 mm", "leveling foot M12 d40", "machine foot M12 40", "thread=M12; foot diameter=40 mm; style=leveling_foot", "Levelling foot M12, base Ø40 (envelope)", "swivel levelling foot M12 40 mm", "thread=M12; foot diameter=40 mm; style=swivel_leveling_foot", "rubber pad levelling foot M12 40 mm", "thread=M12; foot diameter=40 mm; style=rubber_pad_leveling_foot"]

173

standard = "step.parts levelling foot model"

174

175

[[presets]]

176

id = "M12-D50"

177

title = "Levelling foot M12, base Ø50 (envelope)"

178

params = { thread = "M12", base_diameter = 50, stud_length = 25 }

179

aliases = ["levelling foot M12 50 mm", "leveling foot M12 d50", "machine foot M12 50", "thread=M12; foot diameter=50 mm; style=leveling_foot", "Levelling foot M12, base Ø50 (envelope)", "swivel levelling foot M12 50 mm", "thread=M12; foot diameter=50 mm; style=swivel_leveling_foot", "rubber pad levelling foot M12 50 mm", "thread=M12; foot diameter=50 mm; style=rubber_pad_leveling_foot"]

180

standard = "step.parts levelling foot model"

181

name = "steve/levelling-foot"
version = "1.0.0"
runtime = "steve"
license = "MIT"
summary = "Levelling foot envelope (round base + threaded stud), M6 to M12, any base diameter and stud length."
description = """A levelling foot envelope for assemblies: a round base 5 mm thick and a threaded stud (drawn at its \
nominal diameter), threads M6 to M12, base diameter and stud length free. Measured from step.parts' published models \
(MIT), which draw fixed, swivel and rubber-pad feet with this same envelope; no maker or standard is behind them.

Base on the XY plane centred on the origin, stud along +Z. Dimensions and attribution: see the README."""
tags = ["levelling-foot", "leveling-foot", "foot", "machine-foot", "hardware", "metric"]

[parameters.thread]
type = "choice"
default = "M8"
choices = ["M6", "M8", "M10", "M12"]
label = "Stud thread"

[parameters.base_diameter]
type = "number"
default = 30
min = 10
max = 200
unit = "mm"
label = "Base diameter"

[parameters.stud_length]
type = "number"
default = 25
min = 5
max = 300
unit = "mm"
label = "Stud length"
description = "Above the base."

[parameters.material]
type = "choice"
default = "unspecified"
choices = ["unspecified", "steel", "stainless-304"]
label = "Material"

[[presets]]
id = "M6-D20"
title = "Levelling foot M6, base Ø20 (envelope)"
params = { thread = "M6", base_diameter = 20, stud_length = 25 }
aliases = ["levelling foot M6 20 mm", "leveling foot M6 d20", "machine foot M6 20", "thread=M6; foot diameter=20 mm; style=leveling_foot", "Levelling foot M6, base Ø20 (envelope)", "swivel levelling foot M6 20 mm", "thread=M6; foot diameter=20 mm; style=swivel_leveling_foot", "rubber pad levelling foot M6 20 mm", "thread=M6; foot diameter=20 mm; style=rubber_pad_leveling_foot"]
standard = "step.parts levelling foot model"

[[presets]]
id = "M6-D25"
title = "Levelling foot M6, base Ø25 (envelope)"
params = { thread = "M6", base_diameter = 25, stud_length = 25 }
aliases = ["levelling foot M6 25 mm", "leveling foot M6 d25", "machine foot M6 25", "thread=M6; foot diameter=25 mm; style=leveling_foot", "Levelling foot M6, base Ø25 (envelope)", "swivel levelling foot M6 25 mm", "thread=M6; foot diameter=25 mm; style=swivel_leveling_foot", "rubber pad levelling foot M6 25 mm", "thread=M6; foot diameter=25 mm; style=rubber_pad_leveling_foot"]
standard = "step.parts levelling foot model"

[[presets]]
id = "M6-D30"
title = "Levelling foot M6, base Ø30 (envelope)"
params = { thread = "M6", base_diameter = 30, stud_length = 25 }
aliases = ["levelling foot M6 30 mm", "leveling foot M6 d30", "machine foot M6 30", "thread=M6; foot diameter=30 mm; style=leveling_foot", "Levelling foot M6, base Ø30 (envelope)", "swivel levelling foot M6 30 mm", "thread=M6; foot diameter=30 mm; style=swivel_leveling_foot", "rubber pad levelling foot M6 30 mm", "thread=M6; foot diameter=30 mm; style=rubber_pad_leveling_foot"]
standard = "step.parts levelling foot model"

[[presets]]
id = "M6-D40"
title = "Levelling foot M6, base Ø40 (envelope)"
params = { thread = "M6", base_diameter = 40, stud_length = 25 }
aliases = ["levelling foot M6 40 mm", "leveling foot M6 d40", "machine foot M6 40", "thread=M6; foot diameter=40 mm; style=leveling_foot", "Levelling foot M6, base Ø40 (envelope)", "swivel levelling foot M6 40 mm", "thread=M6; foot diameter=40 mm; style=swivel_leveling_foot", "rubber pad levelling foot M6 40 mm", "thread=M6; foot diameter=40 mm; style=rubber_pad_leveling_foot"]
standard = "step.parts levelling foot model"

[[presets]]
id = "M6-D50"
title = "Levelling foot M6, base Ø50 (envelope)"
params = { thread = "M6", base_diameter = 50, stud_length = 25 }
aliases = ["levelling foot M6 50 mm", "leveling foot M6 d50", "machine foot M6 50", "thread=M6; foot diameter=50 mm; style=leveling_foot", "Levelling foot M6, base Ø50 (envelope)", "swivel levelling foot M6 50 mm", "thread=M6; foot diameter=50 mm; style=swivel_leveling_foot", "rubber pad levelling foot M6 50 mm", "thread=M6; foot diameter=50 mm; style=rubber_pad_leveling_foot"]
standard = "step.parts levelling foot model"

[[presets]]
id = "M8-D20"
title = "Levelling foot M8, base Ø20 (envelope)"
params = { thread = "M8", base_diameter = 20, stud_length = 25 }
aliases = ["levelling foot M8 20 mm", "leveling foot M8 d20", "machine foot M8 20", "thread=M8; foot diameter=20 mm; style=leveling_foot", "Levelling foot M8, base Ø20 (envelope)", "swivel levelling foot M8 20 mm", "thread=M8; foot diameter=20 mm; style=swivel_leveling_foot", "rubber pad levelling foot M8 20 mm", "thread=M8; foot diameter=20 mm; style=rubber_pad_leveling_foot"]
standard = "step.parts levelling foot model"

[[presets]]
id = "M8-D25"
title = "Levelling foot M8, base Ø25 (envelope)"
params = { thread = "M8", base_diameter = 25, stud_length = 25 }
aliases = ["levelling foot M8 25 mm", "leveling foot M8 d25", "machine foot M8 25", "thread=M8; foot diameter=25 mm; style=leveling_foot", "Levelling foot M8, base Ø25 (envelope)", "swivel levelling foot M8 25 mm", "thread=M8; foot diameter=25 mm; style=swivel_leveling_foot", "rubber pad levelling foot M8 25 mm", "thread=M8; foot diameter=25 mm; style=rubber_pad_leveling_foot"]
standard = "step.parts levelling foot model"

[[presets]]
id = "M8-D30"
title = "Levelling foot M8, base Ø30 (envelope)"
params = { thread = "M8", base_diameter = 30, stud_length = 25 }
aliases = ["levelling foot M8 30 mm", "leveling foot M8 d30", "machine foot M8 30", "thread=M8; foot diameter=30 mm; style=leveling_foot", "Levelling foot M8, base Ø30 (envelope)", "swivel levelling foot M8 30 mm", "thread=M8; foot diameter=30 mm; style=swivel_leveling_foot", "rubber pad levelling foot M8 30 mm", "thread=M8; foot diameter=30 mm; style=rubber_pad_leveling_foot"]
standard = "step.parts levelling foot model"

[[presets]]
id = "M8-D40"
title = "Levelling foot M8, base Ø40 (envelope)"
params = { thread = "M8", base_diameter = 40, stud_length = 25 }
aliases = ["levelling foot M8 40 mm", "leveling foot M8 d40", "machine foot M8 40", "thread=M8; foot diameter=40 mm; style=leveling_foot", "Levelling foot M8, base Ø40 (envelope)", "swivel levelling foot M8 40 mm", "thread=M8; foot diameter=40 mm; style=swivel_leveling_foot", "rubber pad levelling foot M8 40 mm", "thread=M8; foot diameter=40 mm; style=rubber_pad_leveling_foot"]
standard = "step.parts levelling foot model"

[[presets]]
id = "M8-D50"
title = "Levelling foot M8, base Ø50 (envelope)"
params = { thread = "M8", base_diameter = 50, stud_length = 25 }
aliases = ["levelling foot M8 50 mm", "leveling foot M8 d50", "machine foot M8 50", "thread=M8; foot diameter=50 mm; style=leveling_foot", "Levelling foot M8, base Ø50 (envelope)", "swivel levelling foot M8 50 mm", "thread=M8; foot diameter=50 mm; style=swivel_leveling_foot", "rubber pad levelling foot M8 50 mm", "thread=M8; foot diameter=50 mm; style=rubber_pad_leveling_foot"]
standard = "step.parts levelling foot model"

[[presets]]
id = "M10-D20"
title = "Levelling foot M10, base Ø20 (envelope)"
params = { thread = "M10", base_diameter = 20, stud_length = 25 }
aliases = ["levelling foot M10 20 mm", "leveling foot M10 d20", "machine foot M10 20", "thread=M10; foot diameter=20 mm; style=leveling_foot", "Levelling foot M10, base Ø20 (envelope)", "swivel levelling foot M10 20 mm", "thread=M10; foot diameter=20 mm; style=swivel_leveling_foot", "rubber pad levelling foot M10 20 mm", "thread=M10; foot diameter=20 mm; style=rubber_pad_leveling_foot"]
standard = "step.parts levelling foot model"

[[presets]]
id = "M10-D25"
title = "Levelling foot M10, base Ø25 (envelope)"
params = { thread = "M10", base_diameter = 25, stud_length = 25 }
aliases = ["levelling foot M10 25 mm", "leveling foot M10 d25", "machine foot M10 25", "thread=M10; foot diameter=25 mm; style=leveling_foot", "Levelling foot M10, base Ø25 (envelope)", "swivel levelling foot M10 25 mm", "thread=M10; foot diameter=25 mm; style=swivel_leveling_foot", "rubber pad levelling foot M10 25 mm", "thread=M10; foot diameter=25 mm; style=rubber_pad_leveling_foot"]
standard = "step.parts levelling foot model"

[[presets]]
id = "M10-D30"
title = "Levelling foot M10, base Ø30 (envelope)"
params = { thread = "M10", base_diameter = 30, stud_length = 25 }
aliases = ["levelling foot M10 30 mm", "leveling foot M10 d30", "machine foot M10 30", "thread=M10; foot diameter=30 mm; style=leveling_foot", "Levelling foot M10, base Ø30 (envelope)", "swivel levelling foot M10 30 mm", "thread=M10; foot diameter=30 mm; style=swivel_leveling_foot", "rubber pad levelling foot M10 30 mm", "thread=M10; foot diameter=30 mm; style=rubber_pad_leveling_foot"]
standard = "step.parts levelling foot model"

[[presets]]
id = "M10-D40"
title = "Levelling foot M10, base Ø40 (envelope)"
params = { thread = "M10", base_diameter = 40, stud_length = 25 }
aliases = ["levelling foot M10 40 mm", "leveling foot M10 d40", "machine foot M10 40", "thread=M10; foot diameter=40 mm; style=leveling_foot", "Levelling foot M10, base Ø40 (envelope)", "swivel levelling foot M10 40 mm", "thread=M10; foot diameter=40 mm; style=swivel_leveling_foot", "rubber pad levelling foot M10 40 mm", "thread=M10; foot diameter=40 mm; style=rubber_pad_leveling_foot"]
standard = "step.parts levelling foot model"

[[presets]]
id = "M10-D50"
title = "Levelling foot M10, base Ø50 (envelope)"
params = { thread = "M10", base_diameter = 50, stud_length = 25 }
aliases = ["levelling foot M10 50 mm", "leveling foot M10 d50", "machine foot M10 50", "thread=M10; foot diameter=50 mm; style=leveling_foot", "Levelling foot M10, base Ø50 (envelope)", "swivel levelling foot M10 50 mm", "thread=M10; foot diameter=50 mm; style=swivel_leveling_foot", "rubber pad levelling foot M10 50 mm", "thread=M10; foot diameter=50 mm; style=rubber_pad_leveling_foot"]
standard = "step.parts levelling foot model"

[[presets]]
id = "M12-D20"
title = "Levelling foot M12, base Ø20 (envelope)"
params = { thread = "M12", base_diameter = 20, stud_length = 25 }
aliases = ["levelling foot M12 20 mm", "leveling foot M12 d20", "machine foot M12 20", "thread=M12; foot diameter=20 mm; style=leveling_foot", "Levelling foot M12, base Ø20 (envelope)", "swivel levelling foot M12 20 mm", "thread=M12; foot diameter=20 mm; style=swivel_leveling_foot", "rubber pad levelling foot M12 20 mm", "thread=M12; foot diameter=20 mm; style=rubber_pad_leveling_foot"]
standard = "step.parts levelling foot model"

[[presets]]
id = "M12-D25"
title = "Levelling foot M12, base Ø25 (envelope)"
params = { thread = "M12", base_diameter = 25, stud_length = 25 }
aliases = ["levelling foot M12 25 mm", "leveling foot M12 d25", "machine foot M12 25", "thread=M12; foot diameter=25 mm; style=leveling_foot", "Levelling foot M12, base Ø25 (envelope)", "swivel levelling foot M12 25 mm", "thread=M12; foot diameter=25 mm; style=swivel_leveling_foot", "rubber pad levelling foot M12 25 mm", "thread=M12; foot diameter=25 mm; style=rubber_pad_leveling_foot"]
standard = "step.parts levelling foot model"

[[presets]]
id = "M12-D30"
title = "Levelling foot M12, base Ø30 (envelope)"
params = { thread = "M12", base_diameter = 30, stud_length = 25 }
aliases = ["levelling foot M12 30 mm", "leveling foot M12 d30", "machine foot M12 30", "thread=M12; foot diameter=30 mm; style=leveling_foot", "Levelling foot M12, base Ø30 (envelope)", "swivel levelling foot M12 30 mm", "thread=M12; foot diameter=30 mm; style=swivel_leveling_foot", "rubber pad levelling foot M12 30 mm", "thread=M12; foot diameter=30 mm; style=rubber_pad_leveling_foot"]
standard = "step.parts levelling foot model"

[[presets]]
id = "M12-D40"
title = "Levelling foot M12, base Ø40 (envelope)"
params = { thread = "M12", base_diameter = 40, stud_length = 25 }
aliases = ["levelling foot M12 40 mm", "leveling foot M12 d40", "machine foot M12 40", "thread=M12; foot diameter=40 mm; style=leveling_foot", "Levelling foot M12, base Ø40 (envelope)", "swivel levelling foot M12 40 mm", "thread=M12; foot diameter=40 mm; style=swivel_leveling_foot", "rubber pad levelling foot M12 40 mm", "thread=M12; foot diameter=40 mm; style=rubber_pad_leveling_foot"]
standard = "step.parts levelling foot model"

[[presets]]
id = "M12-D50"
title = "Levelling foot M12, base Ø50 (envelope)"
params = { thread = "M12", base_diameter = 50, stud_length = 25 }
aliases = ["levelling foot M12 50 mm", "leveling foot M12 d50", "machine foot M12 50", "thread=M12; foot diameter=50 mm; style=leveling_foot", "Levelling foot M12, base Ø50 (envelope)", "swivel levelling foot M12 50 mm", "thread=M12; foot diameter=50 mm; style=swivel_leveling_foot", "rubber pad levelling foot M12 50 mm", "thread=M12; foot diameter=50 mm; style=rubber_pad_leveling_foot"]
standard = "step.parts levelling foot model"

README.md 43 lines · Markdown

Download

Levelling foot (envelope)

A levelling foot envelope for assemblies: a round base and a threaded stud, threads M6 to M12, any base diameter and stud length.

Geometry

The base (diameter base_diameter, 5 mm thick) sits on the XY plane, centred on the origin; the stud (drawn at the thread's nominal diameter, no thread) rises from its top along +Z, stud_length long.

Feature	mm
Base thickness	5
Stud diameter	M6: 6, M8: 8, M10: 10, M12: 12
Stud length (models)	25
Base diameters (models)	20, 25, 30, 40, 50

Parameters

Parameter	Meaning
`thread`	`M6`, `M8`, `M10`, `M12`
`base_diameter`	mm
`stud_length`	mm, above the base
`material`	`unspecified` (no material assigned), `steel`, `stainless-304`

Sources

These generic feet name no maker and no standard covers them. The geometry was measured from the published reference models below (the cylinders of each model's two solids: base radius and thickness, stud radius and length), and every preset is checked against its own models: bounding box within 0.05 mm and volume within 2 %.

step.parts, leveling_foot_m<d>_d<D>, swivel_leveling_foot_m<d>_d<D> and rubber_pad_leveling_foot_m<d>_d<D> (https://www.step.parts, repository https://github.com/earthtojake/step.parts, commit c6113328, catalog/step/): step.parts' own models, original project material under the repository's MIT licence (© 2026 earthtojake). They name no material, so the presets have material = "unspecified".

Simplifications (the models'): the fixed, swivel and rubber-pad feet are all drawn with this one envelope (no swivel ball, pad or nut), and the stud is a plain cylinder. The models draw base and stud as two touching solids; the recipe joins them into one.

Preset list: from the step.parts catalogue (MIT), see library/NOTICE.md; a size's three styles share one preset.

# Levelling foot (envelope)

A levelling foot envelope for assemblies: a round base and a threaded stud, threads M6 to M12, any base diameter and
stud length.

## Geometry

The base (diameter `base_diameter`, 5 mm thick) sits on the XY plane, centred on the origin; the stud (drawn at the
thread's nominal diameter, no thread) rises from its top along +Z, `stud_length` long.

| Feature | mm |
|---|---|
| Base thickness | 5 |
| Stud diameter | M6: 6, M8: 8, M10: 10, M12: 12 |
| Stud length (models) | 25 |
| Base diameters (models) | 20, 25, 30, 40, 50 |

## Parameters

| Parameter | Meaning |
|---|---|
| `thread` | `M6`, `M8`, `M10`, `M12` |
| `base_diameter` | mm |
| `stud_length` | mm, above the base |
| `material` | `unspecified` (no material assigned), `steel`, `stainless-304` |

## Sources

These generic feet name no maker and no standard covers them. **The geometry was measured from the published
reference models** below (the cylinders of each model's two solids: base radius and thickness, stud radius and
length), and every preset is checked against its own models: bounding box within 0.05 mm and volume within 2 %.

- **step.parts**, `leveling_foot_m<d>_d<D>`, `swivel_leveling_foot_m<d>_d<D>` and `rubber_pad_leveling_foot_m<d>_d<D>`
  (https://www.step.parts, repository https://github.com/earthtojake/step.parts, commit c6113328, `catalog/step/`):
  step.parts' own models, original project material under the repository's **MIT** licence (© 2026 earthtojake).
  They name no material, so the presets have `material = "unspecified"`.

Simplifications (the models'): the fixed, swivel and rubber-pad feet are all drawn with this one envelope (no swivel
ball, pad or nut), and the stud is a plain cylinder. The models draw base and stud as two touching solids; the recipe
joins them into one.

Preset list: from the step.parts catalogue (MIT), see `library/NOTICE.md`; a size's three styles share one preset.

Use this part

STEVE

Open in STEVE

Open it in STEVE The STEVE runtime runs in STEVE: open the part there, or download the code and bundle.

Get the code

curl -o part.py "https://pythonparts.org/p/steve/levelling-foot/v/1.0.0/raw/part.py"

Raw files, bundle and API

part.py
pypart.toml
README.md
bundle.tar.gzthe package, as published

curl "https://pythonparts.org/api/v1/parts/steve/levelling-foot/1.0.0"

The version's JSON (parameters, presets, files); add /build?name=value for a build at other values.

About this part

steve58 parts

Profile

License: MIT

Permissive: use, change and sell it; keep the copyright notice.

Runtime: STEVE
Built with: CadQuery 2.9.0.dev0
Published: Nov 1, 2026
Downloads: 0
Builds: 0
Stars: 0
Bundle: 9cfa7c55f69e…

#levelling-foot #leveling-foot #foot #machine-foot #hardware #metric

Checks

PassedImports: steve

Every published part passes our checks before it’s listed. It is still code: read it before you use it.

Request a removal A copyright notice, or a trademark, confidential design, safety, malicious code or other problem. Report an illegal or prohibited item

A levelling foot envelope for assemblies: a round base 5 mm thick and a threaded stud (drawn at its nominal diameter), threads M6 to M12, base diameter and stud length free. Measured from step.parts' published models (MIT), which draw fixed, swivel and rubber-pad feet with this same envelope; no maker or standard is behind them. Base on the XY plane centred on the origin, stud along +Z. Dimensions and attribution: see the README.

Levelling foot (envelope)

A levelling foot envelope for assemblies: a round base and a threaded stud, threads M6 to M12, any base diameter and stud length.

Geometry

Feature	mm
Base thickness	5
Stud diameter	M6: 6, M8: 8, M10: 10, M12: 12
Stud length (models)	25
Base diameters (models)	20, 25, 30, 40, 50

Parameters

Parameter	Meaning
`thread`	`M6`, `M8`, `M10`, `M12`
`base_diameter`	mm
`stud_length`	mm, above the base
`material`	`unspecified` (no material assigned), `steel`, `stainless-304`

Sources

step.parts, leveling_foot_m<d>_d<D>, swivel_leveling_foot_m<d>_d<D> and rubber_pad_leveling_foot_m<d>_d<D> (https://www.step.parts, repository https://github.com/earthtojake/step.parts, commit c6113328, catalog/step/): step.parts' own models, original project material under the repository's MIT licence (© 2026 earthtojake). They name no material, so the presets have material = "unspecified".

Preset list: from the step.parts catalogue (MIT), see library/NOTICE.md; a size's three styles share one preset.

1.0.0 Latest Nov 1, 2026 · 1 day ago

More #levelling-foot

STEVEMIT

steve/hex-head-screw

Hexagon head screw, fully threaded, ISO 4017 / DIN 933, M1.6 to M36, any length, with catalogue sizes as presets.

18 85 sizes 0 1 day ago v2.0.0

STEVEMIT

steve/button-head-screw

Hexagon socket button head screw, ISO 7380-1, M3 to M16, any length, with catalogue sizes as presets.

10 65 sizes 0 1 day ago v2.0.0

STEVEMIT

steve/hex-nut

Hex nut, ISO 4032, M2 to M12.

7 9 variants 0 2 days ago v1.1.0

STEVEMIT

steve/plate

Rectangular plate blank, any width, length and thickness, in common plate and sheet materials.

4 45 sizes 0 1 day ago v1.0.0

steve/levelling-foot

Levelling foot (envelope)

Geometry

Parameters

Sources

Levelling foot (envelope)

Geometry

Parameters

Sources

Related parts

steve/hex-head-screw

steve/button-head-screw

steve/hex-nut

steve/plate