STEVEMIT
steve/macropad-keyplate
Adafruit MacroPad RP2040 key plate (product 5128): 3 x 4 switch cut-outs, measured from Adafruit's published model.
STEVEMIT
steve/low-head-socket-cap-screw
Low head socket cap screw, DIN 7984, M3 to M12, any length, with catalogue sizes as presets.
STEVEMIT
steve/linear-bushing
Linear bushing (linear ball bearing) LM / LMF / LMK, shafts 3 to 60 mm: straight, round or square flange.
STEVEMIT
steve/levelling-foot
Levelling foot envelope (round base + threaded stud), M6 to M12, any base diameter and stud length.
STEVEMIT
steve/inch-threaded-rod
Threaded rod, inch, Unified threads #0-80 to 1/2-20 (ASME B1.1), any length, with catalogue sizes as presets.
STEVEMIT
steve/inch-specialty-nut
Inch lock, flange and acorn nuts: nylon-insert and all-metal (ASME B18.16.6), hex flange (ASME B18.2.2), acorn (SAE J483).
STEVEMIT
steve/inch-socket-head-cap-screw
Socket head cap screw, inch, ASME B18.3, #0 to 1/2 in, UNC/UNF, any length, with catalogue sizes as presets.
STEVEMIT
steve/inch-set-screw
Socket set screw, inch, ASME B18.3, #0 to 1/2 in, UNC/UNF, with catalogue sizes as presets.
STEVEMIT
steve/inch-nut
Hex, jam and square nuts, inch, ASME B18.2.2: machine screw nuts #0 to #10, hex, jam and square nuts 1/4 to 1/2 in.
STEVEMIT
steve/inch-lock-washer
Inch lock washers, ASME B18.21.1: regular split (helical spring) and external tooth, #2 to 1/2.
STEVEMIT
steve/inch-hex-head-screw
Hex head screw, inch: ASME B18.2.1 hex cap screws 1/4 to 1/2 in, B18.6.3 hex machine screws #2 to #10, any length.
STEVEMIT
steve/inch-flat-washer
Plain washer, inch: ASME B18.21.1 / B18.22.1 Type A (SAE narrow N / USS wide W) and fender washers, #0 to 1/2 in.
STEVEMIT
steve/inch-flat-head-screw
Flat head (countersunk) socket cap screw, inch, ASME B18.3, #0 to 1/2 in, UNC/UNF, any length, with catalogue sizes as presets.
STEVEMIT
steve/inch-button-head-screw
Button head socket cap screw, inch, ASME B18.3, #0 to 1/2 in, UNC/UNF, any length, with catalogue sizes as presets.
STEVEMIT
steve/i-beam
Hot-rolled I and H beams: IPE (DIN 1025-5), HEA (DIN 1025-3) and HEB (DIN 1025-2), any length.
STEVEMIT
steve/hollow-section
Square and rectangular hollow sections (structural tube), EN 10219-2, any size, wall and length.
STEVEMIT
steve/hex-standoff
Hex standoffs M2 to M4, female/female and male/female: Würth WA-SBRII/SBRIE (M2), Harwin R25/R30/R40 (M2.5 to M4).
STEVEMIT
steve/heat-set-insert
Heat-set (heat / ultrasonic) threaded inserts for plastics, SPIROL Series 19, short and long, M2 to M4.
STEVEMIT
steve/flat-washer
Metric flat washers: ISO 7089 / DIN 125, ISO 7091, ISO 7092, ISO 7093-1, DIN 9021, DIN 433, DIN 440 V, DIN 7349.
STEVEMIT
steve/flat-bar
Flat bar / rectangular bar, EN 10058 sizes and plain flat stock, any width, thickness and length.
STEVEMIT
steve/extrusion-corner-bracket
Corner bracket envelope for 2020, 3030 and 4040 extrusions: two flat legs at a right angle (simplified, no holes).
STEVEMIT
steve/extrusion-accessory
T-slot extrusion accessories (end cap, cover strip, anchor fastener, inside corner connector), 20/30/40 series: simplified.
STEVEMIT
steve/dowel-pin
Parallel pin (dowel pin), ISO 2338 / DIN 7, d 0.6 to 50 mm, any length.
STEVEMIT
steve/deep-groove-ball-bearing
Deep groove ball bearing, metric: 6xx, MR, 60, 62, 63, 68 and 69 series, open, ZZ or 2RS, optional flange.