steve/smd-electrolytic-capacitor

SMD aluminium electrolytic capacitors (chip type) by Nichicon series and case size: UZG, UZT, UWT, UCD and the bi-polar UWP and UUP, 4 x 3.9 to 10 x 10 mm.

v1.0.0 Latest STEVE MIT 0

Open in STEVE

Isometric

Parameters

Preset25 sizes

Nichicon series6 options

Case size (D x L, mm)18 options

Can diameter x overall height. Each series has the sizes in its dimension table (README).

Defaults built

part.py 105 lines · Python · STEVE runtime · checked

Download

"""SMD aluminium electrolytic capacitor (chip type, V-chip) by maker series and case size: the aluminium can standing on its plastic

platform, with two flat terminals under the platform. Centred on the can's axis, seated on the XY plane, the terminals along X: the

positive terminal at -X (a bi-polar series' terminal 1), the negative at +X. Dimensions from the maker's catalogue, listed in the README."""

import math

from steve import Model

series = "UWT" # Maker series

size = "6.3x5.4" # Case size, diameter x height (mm)

# Each entry, by series and case size: (can diameter D, overall height L, terminal length A, platform B (along the terminals), platform C

# (across), gap between the terminals E, terminal width H), nominal, in mm. H is the middle of the catalogue's range ("0.5 to 0.8": 0.65).

# Nichicon "Aluminum Electrolytic Capacitors, Chip Type" catalogue, CAT.8100M (2023;

# www.nichicon.co.jp/english/_assets/images/products/catalog/corporate/digital/06_Chip_Type_Aluminum_Electrolytic_Capacitors_E.pdf),

# "Chip Type" drawings and dimension tables: UZG page 1, UZT page 3, UWP page 5, UWT page 7, UUP page 15, UCD page 25.

SERIES = {

"UZG": {"4x3.9": (4.0, 3.9, 1.8, 4.3, 4.3, 1.0, 0.65), "5x3.9": (5.0, 3.9, 2.1, 5.3, 5.3, 1.3, 0.65),

"6.3x3.9": (6.3, 3.9, 2.4, 6.6, 6.6, 2.2, 0.65)},

"UZT": {"4x4.5": (4.0, 4.5, 1.8, 4.3, 4.3, 1.0, 0.65), "5x4.5": (5.0, 4.5, 2.1, 5.3, 5.3, 1.3, 0.65),

"6.3x4.5": (6.3, 4.5, 2.4, 6.6, 6.6, 2.2, 0.65)},

"UWT": {"4x5.4": (4.0, 5.4, 1.8, 4.3, 4.3, 1.0, 0.65), "5x5.4": (5.0, 5.4, 2.1, 5.3, 5.3, 1.3, 0.65),

"6.3x5.4": (6.3, 5.4, 2.4, 6.6, 6.6, 2.2, 0.65), "8x5.4": (8.0, 5.4, 3.3, 8.3, 8.3, 2.3, 0.65)},

"UCD": {"4x5.8": (4.0, 5.8, 1.8, 4.3, 4.3, 1.0, 0.65), "5x5.8": (5.0, 5.8, 2.1, 5.3, 5.3, 1.3, 0.65),

"6.3x5.8": (6.3, 5.8, 2.4, 6.6, 6.6, 2.2, 0.65), "6.3x7.7": (6.3, 7.7, 2.4, 6.6, 6.6, 2.2, 0.65),

"8x6.2": (8.0, 6.2, 3.3, 8.3, 8.3, 2.3, 0.65), "8x10": (8.0, 10.0, 2.9, 8.3, 8.3, 3.1, 0.95),

"10x7.7": (10.0, 7.7, 3.2, 10.3, 10.3, 4.5, 0.95), "10x10": (10.0, 10.0, 3.2, 10.3, 10.3, 4.5, 0.95)},

"UWP": {"4x5.4": (4.0, 5.4, 1.8, 4.3, 4.3, 1.0, 0.65), "5x5.4": (5.0, 5.4, 2.1, 5.3, 5.3, 1.3, 0.65),

"6.3x5.4": (6.3, 5.4, 2.4, 6.6, 6.6, 2.2, 0.65), "8x5.4": (8.0, 5.4, 3.3, 8.3, 8.3, 2.3, 0.65)},

"UUP": {"4x5.8": (4.0, 5.8, 1.8, 4.3, 4.3, 1.0, 0.65), "5x5.8": (5.0, 5.8, 2.1, 5.3, 5.3, 1.3, 0.65),

"6.3x5.8": (6.3, 5.8, 2.4, 6.6, 6.6, 2.2, 0.65)},

}

# Bi-polar series (catalogue: "Bi-Polarized"): the platform's four corners are chamfered and the top has no polarity band.

BIPOLAR = ("UWP", "UUP")

# Proportions, for looks (the drawings show these but don't dimension them): the terminals are 0.2 thick under the platform (the drawings:

# "0.3 max." below it); the platform is 0.1 x L thick, its chamfered corners cut 0.15 x B; the can's top edge is rounded off by a 45 degree

# bevel of 0.03 x D, and a seal groove 0.04 x D deep and 0.06 x L high runs round it 0.1 x L above the platform; the printed polarity band

# covers the top's circle segment on the negative side beyond 0.45 x the radius, 0.02 deep, flush with the top.

TERM_T = 0.2

# The can's wall, for the mass (the catalogue doesn't give it): 0.2 thick, about the aluminium sheet such cans are drawn from.

WALL = 0.2

if series not in SERIES:

raise ValueError(f"no series {series!r}: {', '.join(SERIES)}")

if size not in SERIES[series]:

raise ValueError(f"no case size {size!r} in series {series}: {', '.join(SERIES[series])}")

D, L, A, B, C, E, H = SERIES[series][size]

bipolar = series in BIPOLAR

R = D / 2

tp = 0.1 * L

z_can = TERM_T + tp

ch = 0.15 * B

bevel = 0.03 * D

g_depth, g_high, g_at = 0.04 * D, 0.06 * L, z_can + 0.1 * L

model = Model()

# Platform: B along X, C along Y, the positive (-X) corners chamfered, all four for a bi-polar series.

xa, ya = B / 2, C / 2

outline = [(-xa + ch, -ya), (xa - (ch if bipolar else 0), -ya)]

outline += [(xa, -ya + ch), (xa, ya - ch)] if bipolar else [(xa, ya)]

outline += [(xa - ch, ya)] if bipolar else []

outline += [(-xa + ch, ya), (-xa, ya - ch), (-xa, -ya + ch)]

model.plane("platform_plane", on="XY", offset=TERM_T, name="Platform")

with model.sketch("platform_sketch", on="platform_plane", name="Platform") as sk:

sk.polyline("platform_outline", outline, closed=True)

model.extrude("platform", "platform_sketch", distance=tp, op="new", body="platform_body", name="Platform")

# Can: revolved half section (radius, height), with the seal groove and the bevelled top edge.

section = [(0, z_can), (R, z_can), (R, g_at), (R - g_depth, g_at + g_high / 2), (R, g_at + g_high), (R, L - bevel), (R - bevel, L), (0, L)]

with model.sketch("can_sketch", on="XZ", name="Can") as sk:

sk.polyline("can_section", section, closed=True)

model.revolve("can", "can_sketch", axis="Z", op="new", body="can_body", name="Can")

# The can is a shell WALL thick, open at the bottom over the platform; the wound element (foil, paper and electrolyte) and its seal fill

# it as one solid, following the groove.

w = WALL

inner = [(0, z_can), (R - w, z_can), (R - w, g_at), (R - g_depth - w, g_at + g_high / 2), (R - w, g_at + g_high), (R - w, L - w - bevel),

(R - w - bevel, L - w), (0, L - w)]

with model.sketch("winding_sketch", on="XZ", name="Winding") as sk:

sk.polyline("winding_section", inner, closed=True)

model.revolve("hollow", "winding_sketch", axis="Z", op="cut", body="can_body", name="Can hollow")

model.revolve("winding", "winding_sketch", axis="Z", op="new", body="winding_body", name="Winding")

bodies = ["platform_body", "can_body", "winding_body"]

if not bipolar:

model.plane("top_plane", on="XY", offset=L, name="Top")

with model.sketch("band_sketch", on="top_plane", name="Polarity band") as sk:

# Circle segment beyond x = 0.45 R on the negative (+X) side, within the bevel's inner edge, as a 24-sided outline.

r = R - bevel

a = math.acos(0.45 * R / r)

sk.polyline("band_outline", [(r * math.cos(-a + 2 * a * i / 24), r * math.sin(-a + 2 * a * i / 24)) for i in range(25)], closed=True)

model.extrude("band_cut", "band_sketch", distance=-0.02, op="cut", body="can_body", name="Polarity band recess")

model.extrude("band", "band_sketch", distance=-0.02, op="new", body="band_body", name="Polarity band")

bodies.append("band_body")

# Terminals: flat strips under the platform, from the gap E out to A beyond it.

for name, sx in (("positive", -1), ("negative", 1)):

with model.sketch(f"{name}_sketch", on="XY", name=f"Terminal {name}") as sk:

sk.rect(f"{name}_rect", (sx * E / 2, -H / 2), (sx * (E / 2 + A), H / 2))

model.extrude(f"{name}_terminal", f"{name}_sketch", distance=TERM_T, op="new", body=f"{name}_body", name=f"Terminal {name}")

# Materials, for looks and a rough mass (the catalogue gives no weight): the can is aluminium; the wound element inside (aluminium foil,

# paper and electrolyte, roughly 1.2 to 1.5 g/cm3) is shown as pa6 (nylon, 1.14), the nearest in density in the material list; the

# platform is a heat-resistant plastic (the catalogue: "Plastic platform"), pa6 too; the band is printed ink, shown with the platform's

# material in black; the terminals are tin-plated, shown as tin.

100

model.material("aluminum", bodies=["can_body"], color="#c8cbd0")

101

model.material("pa6", bodies=["winding_body"], color="#8a8f96")

102

model.material("pa6", bodies=["platform_body"] + (["band_body"] if not bipolar else []), color="#2b2b2b")

103

model.material("tin", bodies=["positive_body", "negative_body"], color="#d9dadc")

104

result = model.result()

105

"""SMD aluminium electrolytic capacitor (chip type, V-chip) by maker series and case size: the aluminium can standing on its plastic
platform, with two flat terminals under the platform. Centred on the can's axis, seated on the XY plane, the terminals along X: the
positive terminal at -X (a bi-polar series' terminal 1), the negative at +X. Dimensions from the maker's catalogue, listed in the README."""
import math

from steve import Model

series = "UWT"  # Maker series
size = "6.3x5.4"  # Case size, diameter x height (mm)

# Each entry, by series and case size: (can diameter D, overall height L, terminal length A, platform B (along the terminals), platform C
# (across), gap between the terminals E, terminal width H), nominal, in mm. H is the middle of the catalogue's range ("0.5 to 0.8": 0.65).
#   Nichicon "Aluminum Electrolytic Capacitors, Chip Type" catalogue, CAT.8100M (2023;
#   www.nichicon.co.jp/english/_assets/images/products/catalog/corporate/digital/06_Chip_Type_Aluminum_Electrolytic_Capacitors_E.pdf),
#   "Chip Type" drawings and dimension tables: UZG page 1, UZT page 3, UWP page 5, UWT page 7, UUP page 15, UCD page 25.
SERIES = {
    "UZG": {"4x3.9": (4.0, 3.9, 1.8, 4.3, 4.3, 1.0, 0.65), "5x3.9": (5.0, 3.9, 2.1, 5.3, 5.3, 1.3, 0.65),
            "6.3x3.9": (6.3, 3.9, 2.4, 6.6, 6.6, 2.2, 0.65)},
    "UZT": {"4x4.5": (4.0, 4.5, 1.8, 4.3, 4.3, 1.0, 0.65), "5x4.5": (5.0, 4.5, 2.1, 5.3, 5.3, 1.3, 0.65),
            "6.3x4.5": (6.3, 4.5, 2.4, 6.6, 6.6, 2.2, 0.65)},
    "UWT": {"4x5.4": (4.0, 5.4, 1.8, 4.3, 4.3, 1.0, 0.65), "5x5.4": (5.0, 5.4, 2.1, 5.3, 5.3, 1.3, 0.65),
            "6.3x5.4": (6.3, 5.4, 2.4, 6.6, 6.6, 2.2, 0.65), "8x5.4": (8.0, 5.4, 3.3, 8.3, 8.3, 2.3, 0.65)},
    "UCD": {"4x5.8": (4.0, 5.8, 1.8, 4.3, 4.3, 1.0, 0.65), "5x5.8": (5.0, 5.8, 2.1, 5.3, 5.3, 1.3, 0.65),
            "6.3x5.8": (6.3, 5.8, 2.4, 6.6, 6.6, 2.2, 0.65), "6.3x7.7": (6.3, 7.7, 2.4, 6.6, 6.6, 2.2, 0.65),
            "8x6.2": (8.0, 6.2, 3.3, 8.3, 8.3, 2.3, 0.65), "8x10": (8.0, 10.0, 2.9, 8.3, 8.3, 3.1, 0.95),
            "10x7.7": (10.0, 7.7, 3.2, 10.3, 10.3, 4.5, 0.95), "10x10": (10.0, 10.0, 3.2, 10.3, 10.3, 4.5, 0.95)},
    "UWP": {"4x5.4": (4.0, 5.4, 1.8, 4.3, 4.3, 1.0, 0.65), "5x5.4": (5.0, 5.4, 2.1, 5.3, 5.3, 1.3, 0.65),
            "6.3x5.4": (6.3, 5.4, 2.4, 6.6, 6.6, 2.2, 0.65), "8x5.4": (8.0, 5.4, 3.3, 8.3, 8.3, 2.3, 0.65)},
    "UUP": {"4x5.8": (4.0, 5.8, 1.8, 4.3, 4.3, 1.0, 0.65), "5x5.8": (5.0, 5.8, 2.1, 5.3, 5.3, 1.3, 0.65),
            "6.3x5.8": (6.3, 5.8, 2.4, 6.6, 6.6, 2.2, 0.65)},
}
# Bi-polar series (catalogue: "Bi-Polarized"): the platform's four corners are chamfered and the top has no polarity band.
BIPOLAR = ("UWP", "UUP")
# Proportions, for looks (the drawings show these but don't dimension them): the terminals are 0.2 thick under the platform (the drawings:
# "0.3 max." below it); the platform is 0.1 x L thick, its chamfered corners cut 0.15 x B; the can's top edge is rounded off by a 45 degree
# bevel of 0.03 x D, and a seal groove 0.04 x D deep and 0.06 x L high runs round it 0.1 x L above the platform; the printed polarity band
# covers the top's circle segment on the negative side beyond 0.45 x the radius, 0.02 deep, flush with the top.
TERM_T = 0.2
# The can's wall, for the mass (the catalogue doesn't give it): 0.2 thick, about the aluminium sheet such cans are drawn from.
WALL = 0.2

if series not in SERIES:
    raise ValueError(f"no series {series!r}: {', '.join(SERIES)}")
if size not in SERIES[series]:
    raise ValueError(f"no case size {size!r} in series {series}: {', '.join(SERIES[series])}")
D, L, A, B, C, E, H = SERIES[series][size]
bipolar = series in BIPOLAR
R = D / 2
tp = 0.1 * L
z_can = TERM_T + tp
ch = 0.15 * B
bevel = 0.03 * D
g_depth, g_high, g_at = 0.04 * D, 0.06 * L, z_can + 0.1 * L

model = Model()
# Platform: B along X, C along Y, the positive (-X) corners chamfered, all four for a bi-polar series.
xa, ya = B / 2, C / 2
outline = [(-xa + ch, -ya), (xa - (ch if bipolar else 0), -ya)]
outline += [(xa, -ya + ch), (xa, ya - ch)] if bipolar else [(xa, ya)]
outline += [(xa - ch, ya)] if bipolar else []
outline += [(-xa + ch, ya), (-xa, ya - ch), (-xa, -ya + ch)]
model.plane("platform_plane", on="XY", offset=TERM_T, name="Platform")
with model.sketch("platform_sketch", on="platform_plane", name="Platform") as sk:
    sk.polyline("platform_outline", outline, closed=True)
model.extrude("platform", "platform_sketch", distance=tp, op="new", body="platform_body", name="Platform")
# Can: revolved half section (radius, height), with the seal groove and the bevelled top edge.
section = [(0, z_can), (R, z_can), (R, g_at), (R - g_depth, g_at + g_high / 2), (R, g_at + g_high), (R, L - bevel), (R - bevel, L), (0, L)]
with model.sketch("can_sketch", on="XZ", name="Can") as sk:
    sk.polyline("can_section", section, closed=True)
model.revolve("can", "can_sketch", axis="Z", op="new", body="can_body", name="Can")
# The can is a shell WALL thick, open at the bottom over the platform; the wound element (foil, paper and electrolyte) and its seal fill
# it as one solid, following the groove.
w = WALL
inner = [(0, z_can), (R - w, z_can), (R - w, g_at), (R - g_depth - w, g_at + g_high / 2), (R - w, g_at + g_high), (R - w, L - w - bevel),
         (R - w - bevel, L - w), (0, L - w)]
with model.sketch("winding_sketch", on="XZ", name="Winding") as sk:
    sk.polyline("winding_section", inner, closed=True)
model.revolve("hollow", "winding_sketch", axis="Z", op="cut", body="can_body", name="Can hollow")
model.revolve("winding", "winding_sketch", axis="Z", op="new", body="winding_body", name="Winding")
bodies = ["platform_body", "can_body", "winding_body"]
if not bipolar:
    model.plane("top_plane", on="XY", offset=L, name="Top")
    with model.sketch("band_sketch", on="top_plane", name="Polarity band") as sk:
        # Circle segment beyond x = 0.45 R on the negative (+X) side, within the bevel's inner edge, as a 24-sided outline.
        r = R - bevel
        a = math.acos(0.45 * R / r)
        sk.polyline("band_outline", [(r * math.cos(-a + 2 * a * i / 24), r * math.sin(-a + 2 * a * i / 24)) for i in range(25)], closed=True)
    model.extrude("band_cut", "band_sketch", distance=-0.02, op="cut", body="can_body", name="Polarity band recess")
    model.extrude("band", "band_sketch", distance=-0.02, op="new", body="band_body", name="Polarity band")
    bodies.append("band_body")
# Terminals: flat strips under the platform, from the gap E out to A beyond it.
for name, sx in (("positive", -1), ("negative", 1)):
    with model.sketch(f"{name}_sketch", on="XY", name=f"Terminal {name}") as sk:
        sk.rect(f"{name}_rect", (sx * E / 2, -H / 2), (sx * (E / 2 + A), H / 2))
    model.extrude(f"{name}_terminal", f"{name}_sketch", distance=TERM_T, op="new", body=f"{name}_body", name=f"Terminal {name}")
# Materials, for looks and a rough mass (the catalogue gives no weight): the can is aluminium; the wound element inside (aluminium foil,
# paper and electrolyte, roughly 1.2 to 1.5 g/cm3) is shown as pa6 (nylon, 1.14), the nearest in density in the material list; the
# platform is a heat-resistant plastic (the catalogue: "Plastic platform"), pa6 too; the band is printed ink, shown with the platform's
# material in black; the terminals are tin-plated, shown as tin.
model.material("aluminum", bodies=["can_body"], color="#c8cbd0")
model.material("pa6", bodies=["winding_body"], color="#8a8f96")
model.material("pa6", bodies=["platform_body"] + (["band_body"] if not bipolar else []), color="#2b2b2b")
model.material("tin", bodies=["positive_body", "negative_body"], color="#d9dadc")
result = model.result()

pypart.toml 196 lines · TOML

Download

name = "steve/smd-electrolytic-capacitor"

version = "1.0.0"

runtime = "steve"

license = "MIT"

summary = "SMD aluminium electrolytic capacitors (chip type) by Nichicon series and case size: UZG, UZT, UWT, UCD and the bi-polar UWP and UUP, 4 x 3.9 to 10 x 10 mm."

description = """SMD aluminium electrolytic capacitor (chip type, V-chip) for board layouts, from Nichicon's chip-type catalogue: the aluminium can with its polarity band on top, standing on the plastic platform, and two flat terminals under it. Series UZG (3.9 mm high), UZT (4.5 mm), UWT (5.4 mm), UCD (5.8 to 10 mm) and the bi-polar UWP and UUP, each in the case sizes of its dimension table. Positive terminal at -X. See the README."""

tags = ["capacitor", "electrolytic", "aluminium", "smd", "nichicon", "electronics"]

[parameters.series]

type = "choice"

default = "UWT"

choices = ["UZG", "UZT", "UWT", "UCD", "UWP", "UUP"]

label = "Nichicon series"

[parameters.size]

type = "choice"

default = "6.3x5.4"

choices = ["4x3.9", "5x3.9", "6.3x3.9", "4x4.5", "5x4.5", "6.3x4.5", "4x5.4", "5x5.4", "6.3x5.4", "8x5.4", "4x5.8", "5x5.8", "6.3x5.8", "6.3x7.7", "8x6.2", "8x10", "10x7.7", "10x10"]

label = "Case size (D x L, mm)"

description = "Can diameter x overall height. Each series has the sizes in its dimension table (README)."

[[presets]]

id = "UZG-4x3.9"

title = "Nichicon UZG SMD aluminium electrolytic capacitor, 4 x 3.9 mm"

params = { series = "UZG", size = "4x3.9" }

aliases = ["Nichicon UZG 4x3.9", "UZG 4x3.9", "SMD electrolytic capacitor 4x3.9", "aluminium electrolytic chip capacitor 4 x 3.9 mm", "CP_Elec_4x3.9"]

standard = "Nichicon UZG"

[[presets]]

id = "UZG-5x3.9"

title = "Nichicon UZG SMD aluminium electrolytic capacitor, 5 x 3.9 mm"

params = { series = "UZG", size = "5x3.9" }

aliases = ["Nichicon UZG 5x3.9", "UZG 5x3.9", "SMD electrolytic capacitor 5x3.9", "aluminium electrolytic chip capacitor 5 x 3.9 mm", "CP_Elec_5x3.9"]

standard = "Nichicon UZG"

[[presets]]

id = "UZG-6.3x3.9"

title = "Nichicon UZG SMD aluminium electrolytic capacitor, 6.3 x 3.9 mm"

params = { series = "UZG", size = "6.3x3.9" }

aliases = ["Nichicon UZG 6.3x3.9", "UZG 6.3x3.9", "SMD electrolytic capacitor 6.3x3.9", "aluminium electrolytic chip capacitor 6.3 x 3.9 mm", "CP_Elec_6.3x3.9"]

standard = "Nichicon UZG"

[[presets]]

id = "UZT-4x4.5"

title = "Nichicon UZT SMD aluminium electrolytic capacitor, 4 x 4.5 mm"

params = { series = "UZT", size = "4x4.5" }

aliases = ["Nichicon UZT 4x4.5", "UZT 4x4.5", "SMD electrolytic capacitor 4x4.5", "aluminium electrolytic chip capacitor 4 x 4.5 mm", "CP_Elec_4x4.5"]

standard = "Nichicon UZT"

[[presets]]

id = "UZT-5x4.5"

title = "Nichicon UZT SMD aluminium electrolytic capacitor, 5 x 4.5 mm"

params = { series = "UZT", size = "5x4.5" }

aliases = ["Nichicon UZT 5x4.5", "UZT 5x4.5", "SMD electrolytic capacitor 5x4.5", "aluminium electrolytic chip capacitor 5 x 4.5 mm", "CP_Elec_5x4.5"]

standard = "Nichicon UZT"

[[presets]]

id = "UZT-6.3x4.5"

title = "Nichicon UZT SMD aluminium electrolytic capacitor, 6.3 x 4.5 mm"

params = { series = "UZT", size = "6.3x4.5" }

aliases = ["Nichicon UZT 6.3x4.5", "UZT 6.3x4.5", "SMD electrolytic capacitor 6.3x4.5", "aluminium electrolytic chip capacitor 6.3 x 4.5 mm", "CP_Elec_6.3x4.5"]

standard = "Nichicon UZT"

[[presets]]

id = "UWT-4x5.4"

title = "Nichicon UWT SMD aluminium electrolytic capacitor, 4 x 5.4 mm"

params = { series = "UWT", size = "4x5.4" }

aliases = ["Nichicon UWT 4x5.4", "UWT 4x5.4", "SMD electrolytic capacitor 4x5.4", "aluminium electrolytic chip capacitor 4 x 5.4 mm", "CP_Elec_4x5.4"]

standard = "Nichicon UWT"

[[presets]]

id = "UWT-5x5.4"

title = "Nichicon UWT SMD aluminium electrolytic capacitor, 5 x 5.4 mm"

params = { series = "UWT", size = "5x5.4" }

aliases = ["Nichicon UWT 5x5.4", "UWT 5x5.4", "SMD electrolytic capacitor 5x5.4", "aluminium electrolytic chip capacitor 5 x 5.4 mm", "CP_Elec_5x5.4"]

standard = "Nichicon UWT"

[[presets]]

id = "UWT-6.3x5.4"

title = "Nichicon UWT SMD aluminium electrolytic capacitor, 6.3 x 5.4 mm"

params = { series = "UWT", size = "6.3x5.4" }

aliases = ["Nichicon UWT 6.3x5.4", "UWT 6.3x5.4", "SMD electrolytic capacitor 6.3x5.4", "aluminium electrolytic chip capacitor 6.3 x 5.4 mm", "CP_Elec_6.3x5.4", "Nichicon UWT SMD aluminium electrolytic capacitor, 6.3 x 5.4 mm"]

standard = "Nichicon UWT"

[[presets]]

id = "UWT-8x5.4"

title = "Nichicon UWT SMD aluminium electrolytic capacitor, 8 x 5.4 mm"

params = { series = "UWT", size = "8x5.4" }

aliases = ["Nichicon UWT 8x5.4", "UWT 8x5.4", "SMD electrolytic capacitor 8x5.4", "aluminium electrolytic chip capacitor 8 x 5.4 mm", "CP_Elec_8x5.4"]

standard = "Nichicon UWT"

[[presets]]

id = "UCD-4x5.8"

title = "Nichicon UCD SMD aluminium electrolytic capacitor, 4 x 5.8 mm"

params = { series = "UCD", size = "4x5.8" }

aliases = ["Nichicon UCD 4x5.8", "UCD 4x5.8", "SMD electrolytic capacitor 4x5.8", "aluminium electrolytic chip capacitor 4 x 5.8 mm", "CP_Elec_4x5.8"]

standard = "Nichicon UCD"

[[presets]]

100

id = "UCD-5x5.8"

101

title = "Nichicon UCD SMD aluminium electrolytic capacitor, 5 x 5.8 mm"

102

params = { series = "UCD", size = "5x5.8" }

103

aliases = ["Nichicon UCD 5x5.8", "UCD 5x5.8", "SMD electrolytic capacitor 5x5.8", "aluminium electrolytic chip capacitor 5 x 5.8 mm", "CP_Elec_5x5.8"]

104

standard = "Nichicon UCD"

105

106

[[presets]]

107

id = "UCD-6.3x5.8"

108

title = "Nichicon UCD SMD aluminium electrolytic capacitor, 6.3 x 5.8 mm"

109

params = { series = "UCD", size = "6.3x5.8" }

110

aliases = ["Nichicon UCD 6.3x5.8", "UCD 6.3x5.8", "SMD electrolytic capacitor 6.3x5.8", "aluminium electrolytic chip capacitor 6.3 x 5.8 mm", "CP_Elec_6.3x5.8"]

111

standard = "Nichicon UCD"

112

113

[[presets]]

114

id = "UCD-6.3x7.7"

115

title = "Nichicon UCD SMD aluminium electrolytic capacitor, 6.3 x 7.7 mm"

116

params = { series = "UCD", size = "6.3x7.7" }

117

aliases = ["Nichicon UCD 6.3x7.7", "UCD 6.3x7.7", "SMD electrolytic capacitor 6.3x7.7", "aluminium electrolytic chip capacitor 6.3 x 7.7 mm", "CP_Elec_6.3x7.7"]

118

standard = "Nichicon UCD"

119

120

[[presets]]

121

id = "UCD-8x6.2"

122

title = "Nichicon UCD SMD aluminium electrolytic capacitor, 8 x 6.2 mm"

123

params = { series = "UCD", size = "8x6.2" }

124

aliases = ["Nichicon UCD 8x6.2", "UCD 8x6.2", "SMD electrolytic capacitor 8x6.2", "aluminium electrolytic chip capacitor 8 x 6.2 mm", "CP_Elec_8x6.2"]

125

standard = "Nichicon UCD"

126

127

[[presets]]

128

id = "UCD-8x10"

129

title = "Nichicon UCD SMD aluminium electrolytic capacitor, 8 x 10 mm"

130

params = { series = "UCD", size = "8x10" }

131

aliases = ["Nichicon UCD 8x10", "UCD 8x10", "SMD electrolytic capacitor 8x10", "aluminium electrolytic chip capacitor 8 x 10 mm", "CP_Elec_8x10"]

132

standard = "Nichicon UCD"

133

134

[[presets]]

135

id = "UCD-10x7.7"

136

title = "Nichicon UCD SMD aluminium electrolytic capacitor, 10 x 7.7 mm"

137

params = { series = "UCD", size = "10x7.7" }

138

aliases = ["Nichicon UCD 10x7.7", "UCD 10x7.7", "SMD electrolytic capacitor 10x7.7", "aluminium electrolytic chip capacitor 10 x 7.7 mm", "CP_Elec_10x7.7"]

139

standard = "Nichicon UCD"

140

141

[[presets]]

142

id = "UCD-10x10"

143

title = "Nichicon UCD SMD aluminium electrolytic capacitor, 10 x 10 mm"

144

params = { series = "UCD", size = "10x10" }

145

aliases = ["Nichicon UCD 10x10", "UCD 10x10", "SMD electrolytic capacitor 10x10", "aluminium electrolytic chip capacitor 10 x 10 mm", "CP_Elec_10x10"]

146

standard = "Nichicon UCD"

147

148

[[presets]]

149

id = "UWP-4x5.4"

150

title = "Nichicon UWP bi-polar SMD aluminium electrolytic capacitor, 4 x 5.4 mm"

151

params = { series = "UWP", size = "4x5.4" }

152

aliases = ["Nichicon UWP 4x5.4", "UWP 4x5.4", "bi-polar SMD electrolytic capacitor 4x5.4", "bi-polar aluminium electrolytic chip capacitor 4 x 5.4 mm", "C_Elec_4x5.4"]

153

standard = "Nichicon UWP"

154

155

[[presets]]

156

id = "UWP-5x5.4"

157

title = "Nichicon UWP bi-polar SMD aluminium electrolytic capacitor, 5 x 5.4 mm"

158

params = { series = "UWP", size = "5x5.4" }

159

aliases = ["Nichicon UWP 5x5.4", "UWP 5x5.4", "bi-polar SMD electrolytic capacitor 5x5.4", "bi-polar aluminium electrolytic chip capacitor 5 x 5.4 mm", "C_Elec_5x5.4"]

160

standard = "Nichicon UWP"

161

162

[[presets]]

163

id = "UWP-6.3x5.4"

164

title = "Nichicon UWP bi-polar SMD aluminium electrolytic capacitor, 6.3 x 5.4 mm"

165

params = { series = "UWP", size = "6.3x5.4" }

166

aliases = ["Nichicon UWP 6.3x5.4", "UWP 6.3x5.4", "bi-polar SMD electrolytic capacitor 6.3x5.4", "bi-polar aluminium electrolytic chip capacitor 6.3 x 5.4 mm", "C_Elec_6.3x5.4"]

167

standard = "Nichicon UWP"

168

169

[[presets]]

170

id = "UWP-8x5.4"

171

title = "Nichicon UWP bi-polar SMD aluminium electrolytic capacitor, 8 x 5.4 mm"

172

params = { series = "UWP", size = "8x5.4" }

173

aliases = ["Nichicon UWP 8x5.4", "UWP 8x5.4", "bi-polar SMD electrolytic capacitor 8x5.4", "bi-polar aluminium electrolytic chip capacitor 8 x 5.4 mm", "C_Elec_8x5.4"]

174

standard = "Nichicon UWP"

175

176

[[presets]]

177

id = "UUP-4x5.8"

178

title = "Nichicon UUP bi-polar SMD aluminium electrolytic capacitor, 4 x 5.8 mm"

179

params = { series = "UUP", size = "4x5.8" }

180

aliases = ["Nichicon UUP 4x5.8", "UUP 4x5.8", "bi-polar SMD electrolytic capacitor 4x5.8", "bi-polar aluminium electrolytic chip capacitor 4 x 5.8 mm", "C_Elec_4x5.8"]

181

standard = "Nichicon UUP"

182

183

[[presets]]

184

id = "UUP-5x5.8"

185

title = "Nichicon UUP bi-polar SMD aluminium electrolytic capacitor, 5 x 5.8 mm"

186

params = { series = "UUP", size = "5x5.8" }

187

aliases = ["Nichicon UUP 5x5.8", "UUP 5x5.8", "bi-polar SMD electrolytic capacitor 5x5.8", "bi-polar aluminium electrolytic chip capacitor 5 x 5.8 mm", "C_Elec_5x5.8"]

188

standard = "Nichicon UUP"

189

190

[[presets]]

191

id = "UUP-6.3x5.8"

192

title = "Nichicon UUP bi-polar SMD aluminium electrolytic capacitor, 6.3 x 5.8 mm"

193

params = { series = "UUP", size = "6.3x5.8" }

194

aliases = ["Nichicon UUP 6.3x5.8", "UUP 6.3x5.8", "bi-polar SMD electrolytic capacitor 6.3x5.8", "bi-polar aluminium electrolytic chip capacitor 6.3 x 5.8 mm", "C_Elec_6.3x5.8"]

195

standard = "Nichicon UUP"

196

name = "steve/smd-electrolytic-capacitor"
version = "1.0.0"
runtime = "steve"
license = "MIT"
summary = "SMD aluminium electrolytic capacitors (chip type) by Nichicon series and case size: UZG, UZT, UWT, UCD and the bi-polar UWP and UUP, 4 x 3.9 to 10 x 10 mm."
description = """SMD aluminium electrolytic capacitor (chip type, V-chip) for board layouts, from Nichicon's chip-type catalogue: the aluminium can with its polarity band on top, standing on the plastic platform, and two flat terminals under it. Series UZG (3.9 mm high), UZT (4.5 mm), UWT (5.4 mm), UCD (5.8 to 10 mm) and the bi-polar UWP and UUP, each in the case sizes of its dimension table. Positive terminal at -X. See the README."""
tags = ["capacitor", "electrolytic", "aluminium", "smd", "nichicon", "electronics"]

[parameters.series]
type = "choice"
default = "UWT"
choices = ["UZG", "UZT", "UWT", "UCD", "UWP", "UUP"]
label = "Nichicon series"

[parameters.size]
type = "choice"
default = "6.3x5.4"
choices = ["4x3.9", "5x3.9", "6.3x3.9", "4x4.5", "5x4.5", "6.3x4.5", "4x5.4", "5x5.4", "6.3x5.4", "8x5.4", "4x5.8", "5x5.8", "6.3x5.8", "6.3x7.7", "8x6.2", "8x10", "10x7.7", "10x10"]
label = "Case size (D x L, mm)"
description = "Can diameter x overall height. Each series has the sizes in its dimension table (README)."

[[presets]]
id = "UZG-4x3.9"
title = "Nichicon UZG SMD aluminium electrolytic capacitor, 4 x 3.9 mm"
params = { series = "UZG", size = "4x3.9" }
aliases = ["Nichicon UZG 4x3.9", "UZG 4x3.9", "SMD electrolytic capacitor 4x3.9", "aluminium electrolytic chip capacitor 4 x 3.9 mm", "CP_Elec_4x3.9"]
standard = "Nichicon UZG"

[[presets]]
id = "UZG-5x3.9"
title = "Nichicon UZG SMD aluminium electrolytic capacitor, 5 x 3.9 mm"
params = { series = "UZG", size = "5x3.9" }
aliases = ["Nichicon UZG 5x3.9", "UZG 5x3.9", "SMD electrolytic capacitor 5x3.9", "aluminium electrolytic chip capacitor 5 x 3.9 mm", "CP_Elec_5x3.9"]
standard = "Nichicon UZG"

[[presets]]
id = "UZG-6.3x3.9"
title = "Nichicon UZG SMD aluminium electrolytic capacitor, 6.3 x 3.9 mm"
params = { series = "UZG", size = "6.3x3.9" }
aliases = ["Nichicon UZG 6.3x3.9", "UZG 6.3x3.9", "SMD electrolytic capacitor 6.3x3.9", "aluminium electrolytic chip capacitor 6.3 x 3.9 mm", "CP_Elec_6.3x3.9"]
standard = "Nichicon UZG"

[[presets]]
id = "UZT-4x4.5"
title = "Nichicon UZT SMD aluminium electrolytic capacitor, 4 x 4.5 mm"
params = { series = "UZT", size = "4x4.5" }
aliases = ["Nichicon UZT 4x4.5", "UZT 4x4.5", "SMD electrolytic capacitor 4x4.5", "aluminium electrolytic chip capacitor 4 x 4.5 mm", "CP_Elec_4x4.5"]
standard = "Nichicon UZT"

[[presets]]
id = "UZT-5x4.5"
title = "Nichicon UZT SMD aluminium electrolytic capacitor, 5 x 4.5 mm"
params = { series = "UZT", size = "5x4.5" }
aliases = ["Nichicon UZT 5x4.5", "UZT 5x4.5", "SMD electrolytic capacitor 5x4.5", "aluminium electrolytic chip capacitor 5 x 4.5 mm", "CP_Elec_5x4.5"]
standard = "Nichicon UZT"

[[presets]]
id = "UZT-6.3x4.5"
title = "Nichicon UZT SMD aluminium electrolytic capacitor, 6.3 x 4.5 mm"
params = { series = "UZT", size = "6.3x4.5" }
aliases = ["Nichicon UZT 6.3x4.5", "UZT 6.3x4.5", "SMD electrolytic capacitor 6.3x4.5", "aluminium electrolytic chip capacitor 6.3 x 4.5 mm", "CP_Elec_6.3x4.5"]
standard = "Nichicon UZT"

[[presets]]
id = "UWT-4x5.4"
title = "Nichicon UWT SMD aluminium electrolytic capacitor, 4 x 5.4 mm"
params = { series = "UWT", size = "4x5.4" }
aliases = ["Nichicon UWT 4x5.4", "UWT 4x5.4", "SMD electrolytic capacitor 4x5.4", "aluminium electrolytic chip capacitor 4 x 5.4 mm", "CP_Elec_4x5.4"]
standard = "Nichicon UWT"

[[presets]]
id = "UWT-5x5.4"
title = "Nichicon UWT SMD aluminium electrolytic capacitor, 5 x 5.4 mm"
params = { series = "UWT", size = "5x5.4" }
aliases = ["Nichicon UWT 5x5.4", "UWT 5x5.4", "SMD electrolytic capacitor 5x5.4", "aluminium electrolytic chip capacitor 5 x 5.4 mm", "CP_Elec_5x5.4"]
standard = "Nichicon UWT"

[[presets]]
id = "UWT-6.3x5.4"
title = "Nichicon UWT SMD aluminium electrolytic capacitor, 6.3 x 5.4 mm"
params = { series = "UWT", size = "6.3x5.4" }
aliases = ["Nichicon UWT 6.3x5.4", "UWT 6.3x5.4", "SMD electrolytic capacitor 6.3x5.4", "aluminium electrolytic chip capacitor 6.3 x 5.4 mm", "CP_Elec_6.3x5.4", "Nichicon UWT SMD aluminium electrolytic capacitor, 6.3 x 5.4 mm"]
standard = "Nichicon UWT"

[[presets]]
id = "UWT-8x5.4"
title = "Nichicon UWT SMD aluminium electrolytic capacitor, 8 x 5.4 mm"
params = { series = "UWT", size = "8x5.4" }
aliases = ["Nichicon UWT 8x5.4", "UWT 8x5.4", "SMD electrolytic capacitor 8x5.4", "aluminium electrolytic chip capacitor 8 x 5.4 mm", "CP_Elec_8x5.4"]
standard = "Nichicon UWT"

[[presets]]
id = "UCD-4x5.8"
title = "Nichicon UCD SMD aluminium electrolytic capacitor, 4 x 5.8 mm"
params = { series = "UCD", size = "4x5.8" }
aliases = ["Nichicon UCD 4x5.8", "UCD 4x5.8", "SMD electrolytic capacitor 4x5.8", "aluminium electrolytic chip capacitor 4 x 5.8 mm", "CP_Elec_4x5.8"]
standard = "Nichicon UCD"

[[presets]]
id = "UCD-5x5.8"
title = "Nichicon UCD SMD aluminium electrolytic capacitor, 5 x 5.8 mm"
params = { series = "UCD", size = "5x5.8" }
aliases = ["Nichicon UCD 5x5.8", "UCD 5x5.8", "SMD electrolytic capacitor 5x5.8", "aluminium electrolytic chip capacitor 5 x 5.8 mm", "CP_Elec_5x5.8"]
standard = "Nichicon UCD"

[[presets]]
id = "UCD-6.3x5.8"
title = "Nichicon UCD SMD aluminium electrolytic capacitor, 6.3 x 5.8 mm"
params = { series = "UCD", size = "6.3x5.8" }
aliases = ["Nichicon UCD 6.3x5.8", "UCD 6.3x5.8", "SMD electrolytic capacitor 6.3x5.8", "aluminium electrolytic chip capacitor 6.3 x 5.8 mm", "CP_Elec_6.3x5.8"]
standard = "Nichicon UCD"

[[presets]]
id = "UCD-6.3x7.7"
title = "Nichicon UCD SMD aluminium electrolytic capacitor, 6.3 x 7.7 mm"
params = { series = "UCD", size = "6.3x7.7" }
aliases = ["Nichicon UCD 6.3x7.7", "UCD 6.3x7.7", "SMD electrolytic capacitor 6.3x7.7", "aluminium electrolytic chip capacitor 6.3 x 7.7 mm", "CP_Elec_6.3x7.7"]
standard = "Nichicon UCD"

[[presets]]
id = "UCD-8x6.2"
title = "Nichicon UCD SMD aluminium electrolytic capacitor, 8 x 6.2 mm"
params = { series = "UCD", size = "8x6.2" }
aliases = ["Nichicon UCD 8x6.2", "UCD 8x6.2", "SMD electrolytic capacitor 8x6.2", "aluminium electrolytic chip capacitor 8 x 6.2 mm", "CP_Elec_8x6.2"]
standard = "Nichicon UCD"

[[presets]]
id = "UCD-8x10"
title = "Nichicon UCD SMD aluminium electrolytic capacitor, 8 x 10 mm"
params = { series = "UCD", size = "8x10" }
aliases = ["Nichicon UCD 8x10", "UCD 8x10", "SMD electrolytic capacitor 8x10", "aluminium electrolytic chip capacitor 8 x 10 mm", "CP_Elec_8x10"]
standard = "Nichicon UCD"

[[presets]]
id = "UCD-10x7.7"
title = "Nichicon UCD SMD aluminium electrolytic capacitor, 10 x 7.7 mm"
params = { series = "UCD", size = "10x7.7" }
aliases = ["Nichicon UCD 10x7.7", "UCD 10x7.7", "SMD electrolytic capacitor 10x7.7", "aluminium electrolytic chip capacitor 10 x 7.7 mm", "CP_Elec_10x7.7"]
standard = "Nichicon UCD"

[[presets]]
id = "UCD-10x10"
title = "Nichicon UCD SMD aluminium electrolytic capacitor, 10 x 10 mm"
params = { series = "UCD", size = "10x10" }
aliases = ["Nichicon UCD 10x10", "UCD 10x10", "SMD electrolytic capacitor 10x10", "aluminium electrolytic chip capacitor 10 x 10 mm", "CP_Elec_10x10"]
standard = "Nichicon UCD"

[[presets]]
id = "UWP-4x5.4"
title = "Nichicon UWP bi-polar SMD aluminium electrolytic capacitor, 4 x 5.4 mm"
params = { series = "UWP", size = "4x5.4" }
aliases = ["Nichicon UWP 4x5.4", "UWP 4x5.4", "bi-polar SMD electrolytic capacitor 4x5.4", "bi-polar aluminium electrolytic chip capacitor 4 x 5.4 mm", "C_Elec_4x5.4"]
standard = "Nichicon UWP"

[[presets]]
id = "UWP-5x5.4"
title = "Nichicon UWP bi-polar SMD aluminium electrolytic capacitor, 5 x 5.4 mm"
params = { series = "UWP", size = "5x5.4" }
aliases = ["Nichicon UWP 5x5.4", "UWP 5x5.4", "bi-polar SMD electrolytic capacitor 5x5.4", "bi-polar aluminium electrolytic chip capacitor 5 x 5.4 mm", "C_Elec_5x5.4"]
standard = "Nichicon UWP"

[[presets]]
id = "UWP-6.3x5.4"
title = "Nichicon UWP bi-polar SMD aluminium electrolytic capacitor, 6.3 x 5.4 mm"
params = { series = "UWP", size = "6.3x5.4" }
aliases = ["Nichicon UWP 6.3x5.4", "UWP 6.3x5.4", "bi-polar SMD electrolytic capacitor 6.3x5.4", "bi-polar aluminium electrolytic chip capacitor 6.3 x 5.4 mm", "C_Elec_6.3x5.4"]
standard = "Nichicon UWP"

[[presets]]
id = "UWP-8x5.4"
title = "Nichicon UWP bi-polar SMD aluminium electrolytic capacitor, 8 x 5.4 mm"
params = { series = "UWP", size = "8x5.4" }
aliases = ["Nichicon UWP 8x5.4", "UWP 8x5.4", "bi-polar SMD electrolytic capacitor 8x5.4", "bi-polar aluminium electrolytic chip capacitor 8 x 5.4 mm", "C_Elec_8x5.4"]
standard = "Nichicon UWP"

[[presets]]
id = "UUP-4x5.8"
title = "Nichicon UUP bi-polar SMD aluminium electrolytic capacitor, 4 x 5.8 mm"
params = { series = "UUP", size = "4x5.8" }
aliases = ["Nichicon UUP 4x5.8", "UUP 4x5.8", "bi-polar SMD electrolytic capacitor 4x5.8", "bi-polar aluminium electrolytic chip capacitor 4 x 5.8 mm", "C_Elec_4x5.8"]
standard = "Nichicon UUP"

[[presets]]
id = "UUP-5x5.8"
title = "Nichicon UUP bi-polar SMD aluminium electrolytic capacitor, 5 x 5.8 mm"
params = { series = "UUP", size = "5x5.8" }
aliases = ["Nichicon UUP 5x5.8", "UUP 5x5.8", "bi-polar SMD electrolytic capacitor 5x5.8", "bi-polar aluminium electrolytic chip capacitor 5 x 5.8 mm", "C_Elec_5x5.8"]
standard = "Nichicon UUP"

[[presets]]
id = "UUP-6.3x5.8"
title = "Nichicon UUP bi-polar SMD aluminium electrolytic capacitor, 6.3 x 5.8 mm"
params = { series = "UUP", size = "6.3x5.8" }
aliases = ["Nichicon UUP 6.3x5.8", "UUP 6.3x5.8", "bi-polar SMD electrolytic capacitor 6.3x5.8", "bi-polar aluminium electrolytic chip capacitor 6.3 x 5.8 mm", "C_Elec_6.3x5.8"]
standard = "Nichicon UUP"

README.md 67 lines · Markdown

Download

SMD electrolytic capacitor

A surface-mount aluminium electrolytic capacitor, the chip type (V-chip): the aluminium can, holding the wound element, stands on a plastic platform, with two flat terminals under the platform. The part is centred on the can's axis and seated on the XY plane, with the terminals along X. The positive terminal is at -X, where the platform's corners are chamfered, and the printed polarity band is on the negative (+X) half of the top. The bi-polar series UWP and UUP have all four platform corners chamfered and no band.

series is the Nichicon series and size the case size, the can's diameter D x the overall height L. Each series has the sizes in its own dimension table:

Series	Kind	Case sizes (D x L)
UZG	3.95 mm max high, wide temperature range	4 x 3.9, 5 x 3.9, 6.3 x 3.9
UZT	4.5 mm high, wide temperature range	4 x 4.5, 5 x 4.5, 6.3 x 4.5
UWT	wide temperature range	4 x 5.4, 5 x 5.4, 6.3 x 5.4, 8 x 5.4
UCD	low impedance	4 x 5.8, 5 x 5.8, 6.3 x 5.8, 6.3 x 7.7, 8 x 6.2, 8 x 10, 10 x 7.7, 10 x 10
UWP	bi-polar, 5.5 mm high	4 x 5.4, 5 x 5.4, 6.3 x 5.4, 8 x 5.4
UUP	bi-polar, 6 mm high	4 x 5.8, 5 x 5.8, 6.3 x 5.8

The dimensions, by can diameter (the same in every series that has it):

D	Platform B x C	Terminal length A	Gap E	Terminal width H
4	4.3 x 4.3	1.8	1.0	0.5 to 0.8
5	5.3 x 5.3	2.1	1.3	0.5 to 0.8
6.3	6.6 x 6.6	2.4	2.2	0.5 to 0.8
8 (L 5.4, 6.2)	8.3 x 8.3	3.3	2.3	0.5 to 0.8
8 (L 10)	8.3 x 8.3	2.9	3.1	0.8 to 1.1
10	10.3 x 10.3	3.2	4.5	0.8 to 1.1

B is the platform along the terminals, C across them. A is each terminal's length, from the gap E outwards, so the terminals reach (2A + E - B) / 2 beyond the platform's edge, within the drawings' "0.5 max.". The model uses the middle of H's range: 0.65 and 0.95.

Source

Nichicon, "Aluminum Electrolytic Capacitors, Chip Type" catalogue, CAT.8100M (2023), from Nichicon's own site: https://www.nichicon.co.jp/english/_assets/images/products/catalog/corporate/digital/06_Chip_Type_Aluminum_Electrolytic_Capacitors_E.pdf. Each series' "Chip Type" drawing and dimension table (in mm):

UZG, page 1: φD 4, 5, 6.3; L 3.90 +0.05/-0.2; A ±0.3, B and C ±0.2, E and H as above.
UZT, page 3: the same as UZG with L 4.5 +0.1/-0.2.
UWP, page 5 ("Bi-Polarized"): φD 4, 5, 6.3, 8; L 5.4 +0.1/-0.2. The top view draws all four platform corners chamfered and no band.
UWT, page 7: 4 x 5.4, 5 x 5.4, 6.3 x 5.4 and 8 x 5.4 (L +0.1/-0.2), with 6.3 x 5.8, 6.3 x 7.7, 8 x 10 and 10 x 10, which UCD has too.
UUP, page 15 ("Bi-Polarized"): φD 4, 5, 6.3; L 5.8 ±0.3.
UCD, page 25: 4 x 5.8 to 10 x 10; L ±0.3 up to 8 x 6.2 and ±0.5 from 8 x 10.

The top views draw the polarity band on the negative half and chamfer the platform's two corners on the positive side; the side views draw the seal groove round the can just above the platform.

Proportions, for looks only. The drawings show these but don't dimension them:

The terminals are 0.2 thick under the platform; the drawings give "0.3 max." for how far they stand below it.
The platform is 0.1 x L thick, as the side views draw it. Its chamfered corners are cut 0.15 x B along each side.
The can's top edge is bevelled at 45 degrees by 0.03 x D. The seal groove is 0.04 x D deep and 0.06 x L high, 0.1 x L above the platform.
The polarity band is the top's circle segment beyond 0.45 x the radius on the negative side, inside the bevel, 0.02 deep and flush with the top.
The can is a shell 0.2 thick, about the aluminium sheet such cans are drawn from (the catalogue doesn't give the wall), open at the bottom over the platform. The wound element inside (aluminium foil, paper and electrolyte) and its seal fill it as one solid that follows the groove.
Materials are for looks and a rough mass. The can is aluminium. The wound element, roughly 1.2 to 1.5 g/cm³, is shown as pa6 (nylon, 1.14), the nearest in density in the material list. The platform is a heat-resistant plastic (the catalogue: "Plastic platform"), pa6 too, and the printed band is shown with it, in black. The terminals are tin-plated, shown as tin. The catalogue gives no unit weight, so there is no mass check: UWT 6.3 x 5.4 comes to about 0.23 g.

Catalogue models

The old catalogue's CP_Elec_<D>x<L> models (polarised) and C_Elec_<D>x<L> models (non-polar) name a case size but no maker. Each maps to the Nichicon series whose dimension table has exactly that case size: a polarised model to UZG, UZT, UWT or UCD, a non-polar one to the bi-polar UWP or UUP. CP_Elec_6.3x5.4_Nichicon is UWT 6.3 x 5.4 too.

Measured on the reference models (2026-11-06), their cans and platforms are Nichicon's: the diameter, the height and the platform B x C are the table's to 0.01 mm. Their terminals differ: they reach 0.6 beyond the platform's edge, where Nichicon's reach (2A + E - B) / 2, 0.15 to 0.3, and the gap between them differs by up to 0.4. CP_Elec_8x10's terminals are also narrower than Nichicon's 0.8 to 1.1. As for generic pin headers, whose post lengths differ between makers, the mapping follows the body, the can and its platform, and the terminals here are Nichicon's:

Models	Terminal width (Nichicon 0.5 to 0.8; 0.8 to 1.1 from 8 x 10)	Gap (Nichicon E)	Over the terminals (Nichicon 2A + E)
CP_Elec_4x3.9, 4x4.5, 4x5.4, 4x5.8; C_Elec_4x5.4, 4x5.8	0.66	1.00 (1.0)	5.50 (4.6)
CP_Elec_5x3.9, 5x4.5, 5x5.4, 5x5.8; C_Elec_5x5.4, 5x5.8	0.66	1.50 (1.3)	6.50 (5.5)
CP_Elec_6.3x3.9, 6.3x4.5, 6.3x5.4 (and _Nichicon), 6.3x5.8, 6.3x7.7; C_Elec_6.3x5.4, 6.3x5.8	0.66	1.80 (2.2)	7.80 (7.0)
CP_Elec_8x5.4, 8x6.2; C_Elec_8x5.4	0.66	2.20 (2.3)	9.50 (8.9)
CP_Elec_8x10	0.66 (0.8 to 1.1)	2.20 (3.1)	9.50 (8.9)
CP_Elec_10x7.7, 10x10	0.90	4.60 (4.5)	12.00 (10.9)

Not mapped, as no table read yet: the other sizes, which no Nichicon series in the catalogue has (for example 3 x 5.4, 4 x 5.3, 5 x 5.9, 6.3 x 9.9, 8 x 10.5, 10 x 12.5 and 16 x 22), and the non-polar 3 x 5.4, 6.3 x 7.7, 8 x 6.2, 8 x 10.2 and 10 x 10.2, which neither UWP nor UUP has.

# SMD electrolytic capacitor

`series` is the Nichicon series and `size` the case size, the can's diameter D x the overall height L. Each series has the sizes in its own dimension table:

| Series | Kind | Case sizes (D x L) |

|---|---|---|

| UZG | 3.95 mm max high, wide temperature range | 4 x 3.9, 5 x 3.9, 6.3 x 3.9 |

| UZT | 4.5 mm high, wide temperature range | 4 x 4.5, 5 x 4.5, 6.3 x 4.5 |

| UWT | wide temperature range | 4 x 5.4, 5 x 5.4, 6.3 x 5.4, 8 x 5.4 |

| UCD | low impedance | 4 x 5.8, 5 x 5.8, 6.3 x 5.8, 6.3 x 7.7, 8 x 6.2, 8 x 10, 10 x 7.7, 10 x 10 |

| UWP | bi-polar, 5.5 mm high | 4 x 5.4, 5 x 5.4, 6.3 x 5.4, 8 x 5.4 |

| UUP | bi-polar, 6 mm high | 4 x 5.8, 5 x 5.8, 6.3 x 5.8 |

The dimensions, by can diameter (the same in every series that has it):

|---|---|---|---|---|

| 4 | 4.3 x 4.3 | 1.8 | 1.0 | 0.5 to 0.8 |

| 5 | 5.3 x 5.3 | 2.1 | 1.3 | 0.5 to 0.8 |

| 6.3 | 6.6 x 6.6 | 2.4 | 2.2 | 0.5 to 0.8 |

| 8 (L 5.4, 6.2) | 8.3 x 8.3 | 3.3 | 2.3 | 0.5 to 0.8 |

| 8 (L 10) | 8.3 x 8.3 | 2.9 | 3.1 | 0.8 to 1.1 |

| 10 | 10.3 x 10.3 | 3.2 | 4.5 | 0.8 to 1.1 |

## Source

Nichicon, "Aluminum Electrolytic Capacitors, Chip Type" catalogue, CAT.8100M (2023), from Nichicon's own site: <https://www.nichicon.co.jp/english/_assets/images/products/catalog/corporate/digital/06_Chip_Type_Aluminum_Electrolytic_Capacitors_E.pdf>. Each series' "Chip Type" drawing and dimension table (in mm):

- UZG, page 1: φD 4, 5, 6.3; L 3.90 +0.05/-0.2; A ±0.3, B and C ±0.2, E and H as above.

- UZT, page 3: the same as UZG with L 4.5 +0.1/-0.2.

- UWP, page 5 ("Bi-Polarized"): φD 4, 5, 6.3, 8; L 5.4 +0.1/-0.2. The top view draws all four platform corners chamfered and no band.

- UWT, page 7: 4 x 5.4, 5 x 5.4, 6.3 x 5.4 and 8 x 5.4 (L +0.1/-0.2), with 6.3 x 5.8, 6.3 x 7.7, 8 x 10 and 10 x 10, which UCD has too.

- UUP, page 15 ("Bi-Polarized"): φD 4, 5, 6.3; L 5.8 ±0.3.

- UCD, page 25: 4 x 5.8 to 10 x 10; L ±0.3 up to 8 x 6.2 and ±0.5 from 8 x 10.

The top views draw the polarity band on the negative half and chamfer the platform's two corners on the positive side; the side views draw the seal groove round the can just above the platform.

**Proportions, for looks only.** The drawings show these but don't dimension them:

- The terminals are 0.2 thick under the platform; the drawings give "0.3 max." for how far they stand below it.

- The platform is 0.1 x L thick, as the side views draw it. Its chamfered corners are cut 0.15 x B along each side.

- The can's top edge is bevelled at 45 degrees by 0.03 x D. The seal groove is 0.04 x D deep and 0.06 x L high, 0.1 x L above the platform.

- The polarity band is the top's circle segment beyond 0.45 x the radius on the negative side, inside the bevel, 0.02 deep and flush with the top.

- The can is a shell 0.2 thick, about the aluminium sheet such cans are drawn from (the catalogue doesn't give the wall), open at the bottom over the platform. The wound element inside (aluminium foil, paper and electrolyte) and its seal fill it as one solid that follows the groove.

- Materials are for looks and a rough mass. The can is aluminium. The wound element, roughly 1.2 to 1.5 g/cm³, is shown as pa6 (nylon, 1.14), the nearest in density in the material list. The platform is a heat-resistant plastic (the catalogue: "Plastic platform"), pa6 too, and the printed band is shown with it, in black. The terminals are tin-plated, shown as tin. The catalogue gives no unit weight, so there is no mass check: UWT 6.3 x 5.4 comes to about 0.23 g.

## Catalogue models

The old catalogue's `CP_Elec_<D>x<L>` models (polarised) and `C_Elec_<D>x<L>` models (non-polar) name a case size but no maker. Each maps to the Nichicon series whose dimension table has exactly that case size: a polarised model to UZG, UZT, UWT or UCD, a non-polar one to the bi-polar UWP or UUP. `CP_Elec_6.3x5.4_Nichicon` is UWT 6.3 x 5.4 too.

|---|---|---|---|

| CP_Elec_4x3.9, 4x4.5, 4x5.4, 4x5.8; C_Elec_4x5.4, 4x5.8 | 0.66 | 1.00 (1.0) | 5.50 (4.6) |

| CP_Elec_5x3.9, 5x4.5, 5x5.4, 5x5.8; C_Elec_5x5.4, 5x5.8 | 0.66 | 1.50 (1.3) | 6.50 (5.5) |

| CP_Elec_6.3x3.9, 6.3x4.5, 6.3x5.4 (and _Nichicon), 6.3x5.8, 6.3x7.7; C_Elec_6.3x5.4, 6.3x5.8 | 0.66 | 1.80 (2.2) | 7.80 (7.0) |

| CP_Elec_8x5.4, 8x6.2; C_Elec_8x5.4 | 0.66 | 2.20 (2.3) | 9.50 (8.9) |

| CP_Elec_8x10 | 0.66 (0.8 to 1.1) | 2.20 (3.1) | 9.50 (8.9) |

| CP_Elec_10x7.7, 10x10 | 0.90 | 4.60 (4.5) | 12.00 (10.9) |

# SMD electrolytic capacitor

A surface-mount aluminium electrolytic capacitor, the chip type (V-chip): the aluminium can, holding the wound element, stands on a plastic platform, with two flat terminals under the platform. The part is centred on the can's axis and seated on the XY plane, with the terminals along X. The positive terminal is at -X, where the platform's corners are chamfered, and the printed polarity band is on the negative (+X) half of the top. The bi-polar series UWP and UUP have all four platform corners chamfered and no band.

`series` is the Nichicon series and `size` the case size, the can's diameter D x the overall height L. Each series has the sizes in its own dimension table:

| Series | Kind | Case sizes (D x L) |
|---|---|---|
| UZG | 3.95 mm max high, wide temperature range | 4 x 3.9, 5 x 3.9, 6.3 x 3.9 |
| UZT | 4.5 mm high, wide temperature range | 4 x 4.5, 5 x 4.5, 6.3 x 4.5 |
| UWT | wide temperature range | 4 x 5.4, 5 x 5.4, 6.3 x 5.4, 8 x 5.4 |
| UCD | low impedance | 4 x 5.8, 5 x 5.8, 6.3 x 5.8, 6.3 x 7.7, 8 x 6.2, 8 x 10, 10 x 7.7, 10 x 10 |
| UWP | bi-polar, 5.5 mm high | 4 x 5.4, 5 x 5.4, 6.3 x 5.4, 8 x 5.4 |
| UUP | bi-polar, 6 mm high | 4 x 5.8, 5 x 5.8, 6.3 x 5.8 |

The dimensions, by can diameter (the same in every series that has it):

| D | Platform B x C | Terminal length A | Gap E | Terminal width H |
|---|---|---|---|---|
| 4 | 4.3 x 4.3 | 1.8 | 1.0 | 0.5 to 0.8 |
| 5 | 5.3 x 5.3 | 2.1 | 1.3 | 0.5 to 0.8 |
| 6.3 | 6.6 x 6.6 | 2.4 | 2.2 | 0.5 to 0.8 |
| 8 (L 5.4, 6.2) | 8.3 x 8.3 | 3.3 | 2.3 | 0.5 to 0.8 |
| 8 (L 10) | 8.3 x 8.3 | 2.9 | 3.1 | 0.8 to 1.1 |
| 10 | 10.3 x 10.3 | 3.2 | 4.5 | 0.8 to 1.1 |

B is the platform along the terminals, C across them. A is each terminal's length, from the gap E outwards, so the terminals reach (2A + E - B) / 2 beyond the platform's edge, within the drawings' "0.5 max.". The model uses the middle of H's range: 0.65 and 0.95.

## Source

Nichicon, "Aluminum Electrolytic Capacitors, Chip Type" catalogue, CAT.8100M (2023), from Nichicon's own site: <https://www.nichicon.co.jp/english/_assets/images/products/catalog/corporate/digital/06_Chip_Type_Aluminum_Electrolytic_Capacitors_E.pdf>. Each series' "Chip Type" drawing and dimension table (in mm):

- UZG, page 1: φD 4, 5, 6.3; L 3.90 +0.05/-0.2; A ±0.3, B and C ±0.2, E and H as above.
- UZT, page 3: the same as UZG with L 4.5 +0.1/-0.2.
- UWP, page 5 ("Bi-Polarized"): φD 4, 5, 6.3, 8; L 5.4 +0.1/-0.2. The top view draws all four platform corners chamfered and no band.
- UWT, page 7: 4 x 5.4, 5 x 5.4, 6.3 x 5.4 and 8 x 5.4 (L +0.1/-0.2), with 6.3 x 5.8, 6.3 x 7.7, 8 x 10 and 10 x 10, which UCD has too.
- UUP, page 15 ("Bi-Polarized"): φD 4, 5, 6.3; L 5.8 ±0.3.
- UCD, page 25: 4 x 5.8 to 10 x 10; L ±0.3 up to 8 x 6.2 and ±0.5 from 8 x 10.

The top views draw the polarity band on the negative half and chamfer the platform's two corners on the positive side; the side views draw the seal groove round the can just above the platform.

**Proportions, for looks only.** The drawings show these but don't dimension them:

- The terminals are 0.2 thick under the platform; the drawings give "0.3 max." for how far they stand below it.
- The platform is 0.1 x L thick, as the side views draw it. Its chamfered corners are cut 0.15 x B along each side.
- The can's top edge is bevelled at 45 degrees by 0.03 x D. The seal groove is 0.04 x D deep and 0.06 x L high, 0.1 x L above the platform.
- The polarity band is the top's circle segment beyond 0.45 x the radius on the negative side, inside the bevel, 0.02 deep and flush with the top.
- The can is a shell 0.2 thick, about the aluminium sheet such cans are drawn from (the catalogue doesn't give the wall), open at the bottom over the platform. The wound element inside (aluminium foil, paper and electrolyte) and its seal fill it as one solid that follows the groove.
- Materials are for looks and a rough mass. The can is aluminium. The wound element, roughly 1.2 to 1.5 g/cm³, is shown as pa6 (nylon, 1.14), the nearest in density in the material list. The platform is a heat-resistant plastic (the catalogue: "Plastic platform"), pa6 too, and the printed band is shown with it, in black. The terminals are tin-plated, shown as tin. The catalogue gives no unit weight, so there is no mass check: UWT 6.3 x 5.4 comes to about 0.23 g.

## Catalogue models

The old catalogue's `CP_Elec_<D>x<L>` models (polarised) and `C_Elec_<D>x<L>` models (non-polar) name a case size but no maker. Each maps to the Nichicon series whose dimension table has exactly that case size: a polarised model to UZG, UZT, UWT or UCD, a non-polar one to the bi-polar UWP or UUP. `CP_Elec_6.3x5.4_Nichicon` is UWT 6.3 x 5.4 too.

Measured on the reference models (2026-11-06), their cans and platforms are Nichicon's: the diameter, the height and the platform B x C are the table's to 0.01 mm. Their terminals differ: they reach 0.6 beyond the platform's edge, where Nichicon's reach (2A + E - B) / 2, 0.15 to 0.3, and the gap between them differs by up to 0.4. CP_Elec_8x10's terminals are also narrower than Nichicon's 0.8 to 1.1. As for generic pin headers, whose post lengths differ between makers, the mapping follows the body, the can and its platform, and the terminals here are Nichicon's:

| Models | Terminal width (Nichicon 0.5 to 0.8; 0.8 to 1.1 from 8 x 10) | Gap (Nichicon E) | Over the terminals (Nichicon 2A + E) |
|---|---|---|---|
| CP_Elec_4x3.9, 4x4.5, 4x5.4, 4x5.8; C_Elec_4x5.4, 4x5.8 | 0.66 | 1.00 (1.0) | 5.50 (4.6) |
| CP_Elec_5x3.9, 5x4.5, 5x5.4, 5x5.8; C_Elec_5x5.4, 5x5.8 | 0.66 | 1.50 (1.3) | 6.50 (5.5) |
| CP_Elec_6.3x3.9, 6.3x4.5, 6.3x5.4 (and _Nichicon), 6.3x5.8, 6.3x7.7; C_Elec_6.3x5.4, 6.3x5.8 | 0.66 | 1.80 (2.2) | 7.80 (7.0) |
| CP_Elec_8x5.4, 8x6.2; C_Elec_8x5.4 | 0.66 | 2.20 (2.3) | 9.50 (8.9) |
| CP_Elec_8x10 | 0.66 (0.8 to 1.1) | 2.20 (3.1) | 9.50 (8.9) |
| CP_Elec_10x7.7, 10x10 | 0.90 | 4.60 (4.5) | 12.00 (10.9) |

Not mapped, as no table read yet: the other sizes, which no Nichicon series in the catalogue has (for example 3 x 5.4, 4 x 5.3, 5 x 5.9, 6.3 x 9.9, 8 x 10.5, 10 x 12.5 and 16 x 22), and the non-polar 3 x 5.4, 6.3 x 7.7, 8 x 6.2, 8 x 10.2 and 10 x 10.2, which neither UWP nor UUP has.

Use this part

STEVE

Open in STEVE

Open it in STEVE The STEVE runtime runs in STEVE: open the part there, or download the code and bundle.

Get the code

curl -o part.py "https://pythonparts.org/p/steve/smd-electrolytic-capacitor/v/1.0.0/raw/part.py"

Raw files, bundle and API

part.py
pypart.toml
README.md
bundle.tar.gzthe package, as published

curl "https://pythonparts.org/api/v1/parts/steve/smd-electrolytic-capacitor/1.0.0"

The version's JSON (parameters, presets, files); add /build?name=value for a build at other values.

About this part

steve120 parts

Profile

Polyamide 6 (nylon 6)Plastics · Custom finish · 1.15 g/cm³
Aluminum (pure)Aluminum alloys · Custom finish · 2.7 g/cm³
Polyamide 6 (nylon 6)Plastics · Custom finish · 1.15 g/cm³
TinOther metals · Custom finish · 7.28 g/cm³

Mass: 0.23 g

At the parameters shown in the viewer, 6 bodies.

License: MIT

Permissive: use, change and sell it; keep the copyright notice.

Runtime: STEVE
Requirements: None stated in the code
Built with: CadQuery 2.9.0.dev0
Published: Nov 6, 2026
Downloads: 0
Builds: 0
Stars: 0
Bundle: d13be20bf0e8…

#capacitor #electrolytic #aluminium #smd #nichicon #electronics

Checks

PassedImports: math, steve

Every published part passes our checks before it’s listed. It is still code: read it before you use it.

Request a removal A copyright notice, or a trademark, confidential design, safety, malicious code or other problem. Report an illegal or prohibited item

SMD aluminium electrolytic capacitor (chip type, V-chip) for board layouts, from Nichicon's chip-type catalogue: the aluminium can with its polarity band on top, standing on the plastic platform, and two flat terminals under it. Series UZG (3.9 mm high), UZT (4.5 mm), UWT (5.4 mm), UCD (5.8 to 10 mm) and the bi-polar UWP and UUP, each in the case sizes of its dimension table. Positive terminal at -X. See the README.

SMD electrolytic capacitor

series is the Nichicon series and size the case size, the can's diameter D x the overall height L. Each series has the sizes in its own dimension table:

Series	Kind	Case sizes (D x L)
UZG	3.95 mm max high, wide temperature range	4 x 3.9, 5 x 3.9, 6.3 x 3.9
UZT	4.5 mm high, wide temperature range	4 x 4.5, 5 x 4.5, 6.3 x 4.5
UWT	wide temperature range	4 x 5.4, 5 x 5.4, 6.3 x 5.4, 8 x 5.4
UCD	low impedance	4 x 5.8, 5 x 5.8, 6.3 x 5.8, 6.3 x 7.7, 8 x 6.2, 8 x 10, 10 x 7.7, 10 x 10
UWP	bi-polar, 5.5 mm high	4 x 5.4, 5 x 5.4, 6.3 x 5.4, 8 x 5.4
UUP	bi-polar, 6 mm high	4 x 5.8, 5 x 5.8, 6.3 x 5.8

The dimensions, by can diameter (the same in every series that has it):

D	Platform B x C	Terminal length A	Gap E	Terminal width H
4	4.3 x 4.3	1.8	1.0	0.5 to 0.8
5	5.3 x 5.3	2.1	1.3	0.5 to 0.8
6.3	6.6 x 6.6	2.4	2.2	0.5 to 0.8
8 (L 5.4, 6.2)	8.3 x 8.3	3.3	2.3	0.5 to 0.8
8 (L 10)	8.3 x 8.3	2.9	3.1	0.8 to 1.1
10	10.3 x 10.3	3.2	4.5	0.8 to 1.1

Source

UZG, page 1: φD 4, 5, 6.3; L 3.90 +0.05/-0.2; A ±0.3, B and C ±0.2, E and H as above.
UZT, page 3: the same as UZG with L 4.5 +0.1/-0.2.
UWP, page 5 ("Bi-Polarized"): φD 4, 5, 6.3, 8; L 5.4 +0.1/-0.2. The top view draws all four platform corners chamfered and no band.
UWT, page 7: 4 x 5.4, 5 x 5.4, 6.3 x 5.4 and 8 x 5.4 (L +0.1/-0.2), with 6.3 x 5.8, 6.3 x 7.7, 8 x 10 and 10 x 10, which UCD has too.
UUP, page 15 ("Bi-Polarized"): φD 4, 5, 6.3; L 5.8 ±0.3.
UCD, page 25: 4 x 5.8 to 10 x 10; L ±0.3 up to 8 x 6.2 and ±0.5 from 8 x 10.

The top views draw the polarity band on the negative half and chamfer the platform's two corners on the positive side; the side views draw the seal groove round the can just above the platform.

Proportions, for looks only. The drawings show these but don't dimension them:

The terminals are 0.2 thick under the platform; the drawings give "0.3 max." for how far they stand below it.
The platform is 0.1 x L thick, as the side views draw it. Its chamfered corners are cut 0.15 x B along each side.
The can's top edge is bevelled at 45 degrees by 0.03 x D. The seal groove is 0.04 x D deep and 0.06 x L high, 0.1 x L above the platform.
The polarity band is the top's circle segment beyond 0.45 x the radius on the negative side, inside the bevel, 0.02 deep and flush with the top.
The can is a shell 0.2 thick, about the aluminium sheet such cans are drawn from (the catalogue doesn't give the wall), open at the bottom over the platform. The wound element inside (aluminium foil, paper and electrolyte) and its seal fill it as one solid that follows the groove.
Materials are for looks and a rough mass. The can is aluminium. The wound element, roughly 1.2 to 1.5 g/cm³, is shown as pa6 (nylon, 1.14), the nearest in density in the material list. The platform is a heat-resistant plastic (the catalogue: "Plastic platform"), pa6 too, and the printed band is shown with it, in black. The terminals are tin-plated, shown as tin. The catalogue gives no unit weight, so there is no mass check: UWT 6.3 x 5.4 comes to about 0.23 g.

Catalogue models

Models	Terminal width (Nichicon 0.5 to 0.8; 0.8 to 1.1 from 8 x 10)	Gap (Nichicon E)	Over the terminals (Nichicon 2A + E)
CP_Elec_4x3.9, 4x4.5, 4x5.4, 4x5.8; C_Elec_4x5.4, 4x5.8	0.66	1.00 (1.0)	5.50 (4.6)
CP_Elec_5x3.9, 5x4.5, 5x5.4, 5x5.8; C_Elec_5x5.4, 5x5.8	0.66	1.50 (1.3)	6.50 (5.5)
CP_Elec_6.3x3.9, 6.3x4.5, 6.3x5.4 (and _Nichicon), 6.3x5.8, 6.3x7.7; C_Elec_6.3x5.4, 6.3x5.8	0.66	1.80 (2.2)	7.80 (7.0)
CP_Elec_8x5.4, 8x6.2; C_Elec_8x5.4	0.66	2.20 (2.3)	9.50 (8.9)
CP_Elec_8x10	0.66 (0.8 to 1.1)	2.20 (3.1)	9.50 (8.9)
CP_Elec_10x7.7, 10x10	0.90	4.60 (4.5)	12.00 (10.9)

1.0.0 Latest Nov 6, 2026 · 42 minutes ago

More #capacitor

STEVEMIT

steve/ceramic-chip-capacitor

Multilayer ceramic chip capacitors (MLCC), EIA 0201 to 3640, with KEMET's case dimensions and chip thickness codes.

0 13 sizes 0 59 minutes ago v1.0.0

STEVEMIT

steve/smd-crystal

SMD quartz crystals by maker series: Epson FA-238, FA-238V, TSX-3225, MA-406, MA-505; TXC 7M, AX; Abracon ABM8G, ABM3B; EuroQuartz MT.

0 11 sizes 0 3 hours ago v1.0.0

STEVEMIT

steve/molded-power-inductor

Molded SMD power inductors in the Sunlord MWSA-S sizes, 4.2 x 4.4 mm to 22 x 23.5 mm, by the maker's dimension table.

1 24 sizes 0 8 hours ago v1.0.0

STEVEMIT

steve/pin-socket

Pin socket (female header): 2.54 mm straight, 2.00 mm surface-mount, 1.27 mm surface-mount and right-angle, 1.00 mm straight and surface-mount, one or two rows.

1 440 sizes 0 4 hours ago v1.2.0

steve/smd-electrolytic-capacitor

SMD electrolytic capacitor

Source

Catalogue models

SMD electrolytic capacitor

Source

Catalogue models

Related parts

steve/ceramic-chip-capacitor

steve/smd-crystal

steve/molded-power-inductor

steve/pin-socket