4 files changed, +284 −77 1.1.0: PT 1,5 at 3.5 mm and MPT 0,5 at 2.54 mm. MKDS 1,5 parts are unchanged.

part.py +21 −10

Copy diff

		@@ -1,19 +1,30 @@
1		-"""PCB screw terminal block, Phoenix Contact MKDS 1,5 type, 5.0 or 5.08 mm pitch, 2 to 16 positions. Pin 1 is at the origin, the row along +X, the housing on
2		-the XY plane, the wire entries facing -Y, the screws on top, the solder pins down through the board. Dimensions from Phoenix Contact's data sheet in the README."""
	1	+"""PCB screw terminal block, Phoenix Contact MKDS 1,5 (5.0 and 5.08 mm), PT 1,5 (3.5 mm) and MPT 0,5 (2.54 mm) types. Pin 1 is at the origin, the row along +X,
	2	+the housing on the XY plane, the wire entries facing -Y, the screws on top, the solder pins down through the board. Dimensions from Phoenix Contact's data sheets
	3	+in the README."""
3	4	from steve import Model
4	5
	6	+series = "MKDS 1,5" # Series
5	7	pitch = 5.08 # mm Pitch
6	8	positions = 2 # Positions
7	9	detail = "full" # full: wire entries, screw heads and solder pins; simple: the housing's outline
8	10
9		-# Phoenix Contact data sheet, PCB terminal block MKDS 1,5/ 2-5,08 (1715721), Dimensions p. 4 and Dimensional drawing p. 8: width a + pitch, height 13.8 above
10		-# the board, length 9.8, solder pins 3.5 long, 0.9 x 0.9, 4.6 from the wire-entry face. The drawing gives the same housing for 5.0 and 5.08 mm pitch.
11		-HEIGHT, LENGTH, PIN_LENGTH, PIN, PIN_FROM_FRONT = 13.8, 9.8, 3.5, 0.9, 4.6
12		-if pitch not in (5.0, 5.08) or not 2 <= positions <= 16:
13		- raise ValueError("MKDS 1,5 comes in 5.0 and 5.08 mm pitch, 2 to 16 positions.")
	11	+# series: (pitches, positions, height above the board, length, solder pin length, pin across the row, pin along, pin from the wire-entry face,
	12	+# width past the end pins in all)
	13	+# MKDS 1,5: data sheet MKDS 1,5/ 2-5,08 (1715721), Dimensions p. 4 and dimensional drawing p. 8: width a + pitch, 13.8, 9.8, pins 3.5, 0.9 x 0.9, 4.6.
	14	+# PT 1,5: data sheet PT 1,5/ 5-3,5-H (1984646), Drawings p. 4: width a + 3.5, 9.2, 7.6, pins 4.5, 0.9, 3.1 from the back face.
	15	+# MPT 0,5: data sheet MPT 0,5/ 2-2,54 (1725656), p. 5 and dimensional drawing p. 6: width 5.54 for 2 positions (1.5 past each end pin), 8.5, 6.2,
	16	+# pins 3.5, 0.5 x 0.9, 3.1 from the back face.
	17	+SERIES = {
	18	+ "MKDS 1,5": ((5.0, 5.08), (2, 16), 13.8, 9.8, 3.5, 0.9, 0.9, 4.6, None),
	19	+ "PT 1,5": ((3.5,), (2, 16), 9.2, 7.6, 4.5, 0.9, 0.9, 4.5, 3.5),
	20	+ "MPT 0,5": ((2.54,), (2, 12), 8.5, 6.2, 3.5, 0.5, 0.9, 3.1, 3.0),
	21	+}
	22	+pitches, (low, high), HEIGHT, LENGTH, PIN_LENGTH, PIN_W, PIN_D, PIN_FROM_FRONT, ends = SERIES[series]
	23	+if pitch not in pitches or not low <= positions <= high:
	24	+ raise ValueError(f"{series} comes in pitch {pitches} with {low} to {high} positions.")
14	25
15		-width = positions * pitch
16		-x0 = -pitch / 2
	26	+width = (positions - 1) * pitch + (ends if ends is not None else pitch)
	27	+x0 = -(width - (positions - 1) * pitch) / 2
17	28	front = -PIN_FROM_FRONT
18	29	# the side profile: the step at the top of the wire-entry face and the sloped back are proportions, for looks
19	30	profile = [(front, 0), (front + LENGTH, 0), (front + LENGTH, 0.72 * HEIGHT), (front + 0.75 * LENGTH, HEIGHT), (front + 0.25 * LENGTH, HEIGHT), (front + 0.25 * LENGTH, 0.8 * HEIGHT), (front, 0.8 * HEIGHT)]
		@@ -37,7 +48,7 @@
37	48	model.plane("pin_plane", on="XY", offset=-PIN_LENGTH, name="Solder pins")
38	49	with model.sketch("pins_sketch", on="pin_plane", name="Solder pins") as sk:
39	50	for i in range(positions):
40		- sk.rect(f"pin_{i}", (i * pitch - PIN / 2, -PIN / 2), (i * pitch + PIN / 2, PIN / 2))
	51	+ sk.rect(f"pin_{i}", (i * pitch - PIN_W / 2, -PIN_D / 2), (i * pitch + PIN_W / 2, PIN_D / 2))
41	52	model.extrude("pins", "pins_sketch", distance=PIN_LENGTH + 1, name="Solder pins")
42	53	model.material("pa6", color="#2f7d4a")
43	54	result = model.result()

pypart.toml +13 −4

Copy diff

		@@ -1,15 +1,23 @@
1	1	name = "steve/screw-terminal-block"
2		-version = "1.0.0"
	2	+version = "1.1.0"
3	3	runtime = "steve"
4	4	license = "MIT"
5		-summary = "PCB screw terminal block, Phoenix Contact MKDS 1,5 type: 5.0 and 5.08 mm pitch, 2 to 16 positions."
6		-description = """PCB screw terminal block of the MKDS 1,5 type, with wire entries, screw openings and solder pins. Width, height, length and pins from Phoenix Contact's data sheet. See the README."""
	5	+summary = "PCB screw terminal block, Phoenix Contact types: MKDS 1,5 (5.0, 5.08 mm), PT 1,5 (3.5 mm), MPT 0,5 (2.54 mm)."
	6	+changes = "PT 1,5 at 3.5 mm and MPT 0,5 at 2.54 mm. MKDS 1,5 parts are unchanged."
	7	+description = """PCB screw terminal block of the MKDS 1,5, PT 1,5 or MPT 0,5 type, with wire entries, screw openings and solder pins. Width, height, length and pins from Phoenix Contact's data sheets. See the README."""
7	8	tags = ["terminal-block", "screw-terminal", "phoenix", "mkds", "connector", "electronics"]
	9	+
	10	+[parameters.series]
	11	+type = "choice"
	12	+default = "MKDS 1,5"
	13	+choices = ["MKDS 1,5", "PT 1,5", "MPT 0,5"]
	14	+label = "Series"
8	15
9	16	[parameters.pitch]
10	17	type = "choice"
11	18	default = 5.08
12		-choices = [5.0, 5.08]
	19	+choices = [2.54, 3.5, 5.0, 5.08]
	20	+description = "MKDS 1,5: 5.0 or 5.08. PT 1,5: 3.5. MPT 0,5: 2.54."
13	21	unit = "mm"
14	22	label = "Pitch"
15	23
		@@ -19,6 +27,7 @@
19	27	min = 2
20	28	max = 16
21	29	label = "Positions"
	30	+description = "2 to 16; MPT 0,5: 2 to 12."
22	31
23	32	[parameters.detail]
24	33	type = "choice"

presets.toml +243 −61

Copy diff

		@@ -3,217 +3,399 @@
3	3	[[presets]]
4	4	id = "MKDS1.5-2-5.0"
5	5	title = "Screw terminal block, 2 positions, 5.0 mm (MKDS 1,5)"
6		-params = { pitch = 5, positions = 2 }
7		-aliases = ["MKDS-1,5-2-5.0", "MKDS 1,5/2-5,0", "2 pin screw terminal 5.0", "2 way terminal block 5.0mm", "2P screw terminal 5.0", "2 position terminal block", "2 pin terminal block"]
	6	+params = { series = "MKDS 1,5", pitch = 5, positions = 2 }
	7	+aliases = ["MKDS-1,5-2-5.0", "MKDS 1,5/2-5,0", "2 pin screw terminal 5.0", "2 way terminal block 5.0mm", "2P screw terminal 5.0", "2 position terminal block 5.0"]
8	8	standard = "Phoenix Contact"
9	9
10	10	[[presets]]
11	11	id = "MKDS1.5-3-5.0"
12	12	title = "Screw terminal block, 3 positions, 5.0 mm (MKDS 1,5)"
13		-params = { pitch = 5, positions = 3 }
14		-aliases = ["MKDS-1,5-3-5.0", "MKDS 1,5/3-5,0", "3 pin screw terminal 5.0", "3 way terminal block 5.0mm", "3P screw terminal 5.0", "3 position terminal block", "3 pin terminal block"]
	13	+params = { series = "MKDS 1,5", pitch = 5, positions = 3 }
	14	+aliases = ["MKDS-1,5-3-5.0", "MKDS 1,5/3-5,0", "3 pin screw terminal 5.0", "3 way terminal block 5.0mm", "3P screw terminal 5.0", "3 position terminal block 5.0"]
15	15	standard = "Phoenix Contact"
16	16
17	17	[[presets]]
18	18	id = "MKDS1.5-4-5.0"
19	19	title = "Screw terminal block, 4 positions, 5.0 mm (MKDS 1,5)"
20		-params = { pitch = 5, positions = 4 }
21		-aliases = ["MKDS-1,5-4-5.0", "MKDS 1,5/4-5,0", "4 pin screw terminal 5.0", "4 way terminal block 5.0mm", "4P screw terminal 5.0", "4 position terminal block", "4 pin terminal block"]
	20	+params = { series = "MKDS 1,5", pitch = 5, positions = 4 }
	21	+aliases = ["MKDS-1,5-4-5.0", "MKDS 1,5/4-5,0", "4 pin screw terminal 5.0", "4 way terminal block 5.0mm", "4P screw terminal 5.0", "4 position terminal block 5.0"]
22	22	standard = "Phoenix Contact"
23	23
24	24	[[presets]]
25	25	id = "MKDS1.5-5-5.0"
26	26	title = "Screw terminal block, 5 positions, 5.0 mm (MKDS 1,5)"
27		-params = { pitch = 5, positions = 5 }
28		-aliases = ["MKDS-1,5-5-5.0", "MKDS 1,5/5-5,0", "5 pin screw terminal 5.0", "5 way terminal block 5.0mm", "5P screw terminal 5.0", "5 position terminal block", "5 pin terminal block"]
	27	+params = { series = "MKDS 1,5", pitch = 5, positions = 5 }
	28	+aliases = ["MKDS-1,5-5-5.0", "MKDS 1,5/5-5,0", "5 pin screw terminal 5.0", "5 way terminal block 5.0mm", "5P screw terminal 5.0", "5 position terminal block 5.0"]
29	29	standard = "Phoenix Contact"
30	30
31	31	[[presets]]
32	32	id = "MKDS1.5-6-5.0"
33	33	title = "Screw terminal block, 6 positions, 5.0 mm (MKDS 1,5)"
34		-params = { pitch = 5, positions = 6 }
35		-aliases = ["MKDS-1,5-6-5.0", "MKDS 1,5/6-5,0", "6 pin screw terminal 5.0", "6 way terminal block 5.0mm", "6P screw terminal 5.0", "6 position terminal block", "6 pin terminal block"]
	34	+params = { series = "MKDS 1,5", pitch = 5, positions = 6 }
	35	+aliases = ["MKDS-1,5-6-5.0", "MKDS 1,5/6-5,0", "6 pin screw terminal 5.0", "6 way terminal block 5.0mm", "6P screw terminal 5.0", "6 position terminal block 5.0"]
36	36	standard = "Phoenix Contact"
37	37
38	38	[[presets]]
39	39	id = "MKDS1.5-7-5.0"
40	40	title = "Screw terminal block, 7 positions, 5.0 mm (MKDS 1,5)"
41		-params = { pitch = 5, positions = 7 }
42		-aliases = ["MKDS-1,5-7-5.0", "MKDS 1,5/7-5,0", "7 pin screw terminal 5.0", "7 way terminal block 5.0mm", "7P screw terminal 5.0", "7 position terminal block", "7 pin terminal block"]
	41	+params = { series = "MKDS 1,5", pitch = 5, positions = 7 }
	42	+aliases = ["MKDS-1,5-7-5.0", "MKDS 1,5/7-5,0", "7 pin screw terminal 5.0", "7 way terminal block 5.0mm", "7P screw terminal 5.0", "7 position terminal block 5.0"]
43	43	standard = "Phoenix Contact"
44	44
45	45	[[presets]]
46	46	id = "MKDS1.5-8-5.0"
47	47	title = "Screw terminal block, 8 positions, 5.0 mm (MKDS 1,5)"
48		-params = { pitch = 5, positions = 8 }
49		-aliases = ["MKDS-1,5-8-5.0", "MKDS 1,5/8-5,0", "8 pin screw terminal 5.0", "8 way terminal block 5.0mm", "8P screw terminal 5.0", "8 position terminal block", "8 pin terminal block"]
	48	+params = { series = "MKDS 1,5", pitch = 5, positions = 8 }
	49	+aliases = ["MKDS-1,5-8-5.0", "MKDS 1,5/8-5,0", "8 pin screw terminal 5.0", "8 way terminal block 5.0mm", "8P screw terminal 5.0", "8 position terminal block 5.0"]
50	50	standard = "Phoenix Contact"
51	51
52	52	[[presets]]
53	53	id = "MKDS1.5-9-5.0"
54	54	title = "Screw terminal block, 9 positions, 5.0 mm (MKDS 1,5)"
55		-params = { pitch = 5, positions = 9 }
56		-aliases = ["MKDS-1,5-9-5.0", "MKDS 1,5/9-5,0", "9 pin screw terminal 5.0", "9 way terminal block 5.0mm", "9P screw terminal 5.0", "9 position terminal block", "9 pin terminal block"]
	55	+params = { series = "MKDS 1,5", pitch = 5, positions = 9 }
	56	+aliases = ["MKDS-1,5-9-5.0", "MKDS 1,5/9-5,0", "9 pin screw terminal 5.0", "9 way terminal block 5.0mm", "9P screw terminal 5.0", "9 position terminal block 5.0"]
57	57	standard = "Phoenix Contact"
58	58
59	59	[[presets]]
60	60	id = "MKDS1.5-10-5.0"
61	61	title = "Screw terminal block, 10 positions, 5.0 mm (MKDS 1,5)"
62		-params = { pitch = 5, positions = 10 }
63		-aliases = ["MKDS-1,5-10-5.0", "MKDS 1,5/10-5,0", "10 pin screw terminal 5.0", "10 way terminal block 5.0mm", "10P screw terminal 5.0", "10 position terminal block", "10 pin terminal block"]
	62	+params = { series = "MKDS 1,5", pitch = 5, positions = 10 }
	63	+aliases = ["MKDS-1,5-10-5.0", "MKDS 1,5/10-5,0", "10 pin screw terminal 5.0", "10 way terminal block 5.0mm", "10P screw terminal 5.0", "10 position terminal block 5.0"]
64	64	standard = "Phoenix Contact"
65	65
66	66	[[presets]]
67	67	id = "MKDS1.5-11-5.0"
68	68	title = "Screw terminal block, 11 positions, 5.0 mm (MKDS 1,5)"
69		-params = { pitch = 5, positions = 11 }
70		-aliases = ["MKDS-1,5-11-5.0", "MKDS 1,5/11-5,0", "11 pin screw terminal 5.0", "11 way terminal block 5.0mm", "11P screw terminal 5.0", "11 position terminal block", "11 pin terminal block"]
	69	+params = { series = "MKDS 1,5", pitch = 5, positions = 11 }
	70	+aliases = ["MKDS-1,5-11-5.0", "MKDS 1,5/11-5,0", "11 pin screw terminal 5.0", "11 way terminal block 5.0mm", "11P screw terminal 5.0", "11 position terminal block 5.0"]
71	71	standard = "Phoenix Contact"
72	72
73	73	[[presets]]
74	74	id = "MKDS1.5-12-5.0"
75	75	title = "Screw terminal block, 12 positions, 5.0 mm (MKDS 1,5)"
76		-params = { pitch = 5, positions = 12 }
77		-aliases = ["MKDS-1,5-12-5.0", "MKDS 1,5/12-5,0", "12 pin screw terminal 5.0", "12 way terminal block 5.0mm", "12P screw terminal 5.0", "12 position terminal block", "12 pin terminal block"]
	76	+params = { series = "MKDS 1,5", pitch = 5, positions = 12 }
	77	+aliases = ["MKDS-1,5-12-5.0", "MKDS 1,5/12-5,0", "12 pin screw terminal 5.0", "12 way terminal block 5.0mm", "12P screw terminal 5.0", "12 position terminal block 5.0"]
78	78	standard = "Phoenix Contact"
79	79
80	80	[[presets]]
81	81	id = "MKDS1.5-13-5.0"
82	82	title = "Screw terminal block, 13 positions, 5.0 mm (MKDS 1,5)"
83		-params = { pitch = 5, positions = 13 }
84		-aliases = ["MKDS-1,5-13-5.0", "MKDS 1,5/13-5,0", "13 pin screw terminal 5.0", "13 way terminal block 5.0mm", "13P screw terminal 5.0", "13 position terminal block", "13 pin terminal block"]
	83	+params = { series = "MKDS 1,5", pitch = 5, positions = 13 }
	84	+aliases = ["MKDS-1,5-13-5.0", "MKDS 1,5/13-5,0", "13 pin screw terminal 5.0", "13 way terminal block 5.0mm", "13P screw terminal 5.0", "13 position terminal block 5.0"]
85	85	standard = "Phoenix Contact"
86	86
87	87	[[presets]]
88	88	id = "MKDS1.5-14-5.0"
89	89	title = "Screw terminal block, 14 positions, 5.0 mm (MKDS 1,5)"
90		-params = { pitch = 5, positions = 14 }
91		-aliases = ["MKDS-1,5-14-5.0", "MKDS 1,5/14-5,0", "14 pin screw terminal 5.0", "14 way terminal block 5.0mm", "14P screw terminal 5.0", "14 position terminal block", "14 pin terminal block"]
	90	+params = { series = "MKDS 1,5", pitch = 5, positions = 14 }
	91	+aliases = ["MKDS-1,5-14-5.0", "MKDS 1,5/14-5,0", "14 pin screw terminal 5.0", "14 way terminal block 5.0mm", "14P screw terminal 5.0", "14 position terminal block 5.0"]
92	92	standard = "Phoenix Contact"
93	93
94	94	[[presets]]
95	95	id = "MKDS1.5-15-5.0"
96	96	title = "Screw terminal block, 15 positions, 5.0 mm (MKDS 1,5)"
97		-params = { pitch = 5, positions = 15 }
98		-aliases = ["MKDS-1,5-15-5.0", "MKDS 1,5/15-5,0", "15 pin screw terminal 5.0", "15 way terminal block 5.0mm", "15P screw terminal 5.0", "15 position terminal block", "15 pin terminal block"]
	97	+params = { series = "MKDS 1,5", pitch = 5, positions = 15 }
	98	+aliases = ["MKDS-1,5-15-5.0", "MKDS 1,5/15-5,0", "15 pin screw terminal 5.0", "15 way terminal block 5.0mm", "15P screw terminal 5.0", "15 position terminal block 5.0"]
99	99	standard = "Phoenix Contact"
100	100
101	101	[[presets]]
102	102	id = "MKDS1.5-16-5.0"
103	103	title = "Screw terminal block, 16 positions, 5.0 mm (MKDS 1,5)"
104		-params = { pitch = 5, positions = 16 }
105		-aliases = ["MKDS-1,5-16-5.0", "MKDS 1,5/16-5,0", "16 pin screw terminal 5.0", "16 way terminal block 5.0mm", "16P screw terminal 5.0", "16 position terminal block", "16 pin terminal block"]
	104	+params = { series = "MKDS 1,5", pitch = 5, positions = 16 }
	105	+aliases = ["MKDS-1,5-16-5.0", "MKDS 1,5/16-5,0", "16 pin screw terminal 5.0", "16 way terminal block 5.0mm", "16P screw terminal 5.0", "16 position terminal block 5.0"]
106	106	standard = "Phoenix Contact"
107	107
108	108	[[presets]]
109	109	id = "MKDS1.5-2-5.08"
110	110	title = "Screw terminal block, 2 positions, 5.08 mm (MKDS 1,5)"
111		-params = { pitch = 5.08, positions = 2 }
112		-aliases = ["MKDS-1,5-2-5.08", "MKDS 1,5/2-5,08", "2 pin screw terminal 5.08", "2 way terminal block 5.08mm", "2P screw terminal 5.08", "2 position terminal block", "2 pin terminal block"]
	111	+params = { series = "MKDS 1,5", pitch = 5.08, positions = 2 }
	112	+aliases = ["MKDS-1,5-2-5.08", "MKDS 1,5/2-5,08", "2 pin screw terminal 5.08", "2 way terminal block 5.08mm", "2P screw terminal 5.08", "2 position terminal block 5.08"]
113	113	standard = "Phoenix Contact"
114	114
115	115	[[presets]]
116	116	id = "MKDS1.5-3-5.08"
117	117	title = "Screw terminal block, 3 positions, 5.08 mm (MKDS 1,5)"
118		-params = { pitch = 5.08, positions = 3 }
119		-aliases = ["MKDS-1,5-3-5.08", "MKDS 1,5/3-5,08", "3 pin screw terminal 5.08", "3 way terminal block 5.08mm", "3P screw terminal 5.08", "3 position terminal block", "3 pin terminal block"]
	118	+params = { series = "MKDS 1,5", pitch = 5.08, positions = 3 }
	119	+aliases = ["MKDS-1,5-3-5.08", "MKDS 1,5/3-5,08", "3 pin screw terminal 5.08", "3 way terminal block 5.08mm", "3P screw terminal 5.08", "3 position terminal block 5.08"]
120	120	standard = "Phoenix Contact"
121	121
122	122	[[presets]]
123	123	id = "MKDS1.5-4-5.08"
124	124	title = "Screw terminal block, 4 positions, 5.08 mm (MKDS 1,5)"
125		-params = { pitch = 5.08, positions = 4 }
126		-aliases = ["MKDS-1,5-4-5.08", "MKDS 1,5/4-5,08", "4 pin screw terminal 5.08", "4 way terminal block 5.08mm", "4P screw terminal 5.08", "4 position terminal block", "4 pin terminal block"]
	125	+params = { series = "MKDS 1,5", pitch = 5.08, positions = 4 }
	126	+aliases = ["MKDS-1,5-4-5.08", "MKDS 1,5/4-5,08", "4 pin screw terminal 5.08", "4 way terminal block 5.08mm", "4P screw terminal 5.08", "4 position terminal block 5.08"]
127	127	standard = "Phoenix Contact"
128	128
129	129	[[presets]]
130	130	id = "MKDS1.5-5-5.08"
131	131	title = "Screw terminal block, 5 positions, 5.08 mm (MKDS 1,5)"
132		-params = { pitch = 5.08, positions = 5 }
133		-aliases = ["MKDS-1,5-5-5.08", "MKDS 1,5/5-5,08", "5 pin screw terminal 5.08", "5 way terminal block 5.08mm", "5P screw terminal 5.08", "5 position terminal block", "5 pin terminal block"]
	132	+params = { series = "MKDS 1,5", pitch = 5.08, positions = 5 }
	133	+aliases = ["MKDS-1,5-5-5.08", "MKDS 1,5/5-5,08", "5 pin screw terminal 5.08", "5 way terminal block 5.08mm", "5P screw terminal 5.08", "5 position terminal block 5.08"]
134	134	standard = "Phoenix Contact"
135	135
136	136	[[presets]]
137	137	id = "MKDS1.5-6-5.08"
138	138	title = "Screw terminal block, 6 positions, 5.08 mm (MKDS 1,5)"
139		-params = { pitch = 5.08, positions = 6 }
140		-aliases = ["MKDS-1,5-6-5.08", "MKDS 1,5/6-5,08", "6 pin screw terminal 5.08", "6 way terminal block 5.08mm", "6P screw terminal 5.08", "6 position terminal block", "6 pin terminal block"]
	139	+params = { series = "MKDS 1,5", pitch = 5.08, positions = 6 }
	140	+aliases = ["MKDS-1,5-6-5.08", "MKDS 1,5/6-5,08", "6 pin screw terminal 5.08", "6 way terminal block 5.08mm", "6P screw terminal 5.08", "6 position terminal block 5.08"]
141	141	standard = "Phoenix Contact"
142	142
143	143	[[presets]]
144	144	id = "MKDS1.5-7-5.08"
145	145	title = "Screw terminal block, 7 positions, 5.08 mm (MKDS 1,5)"
146		-params = { pitch = 5.08, positions = 7 }
147		-aliases = ["MKDS-1,5-7-5.08", "MKDS 1,5/7-5,08", "7 pin screw terminal 5.08", "7 way terminal block 5.08mm", "7P screw terminal 5.08", "7 position terminal block", "7 pin terminal block"]
	146	+params = { series = "MKDS 1,5", pitch = 5.08, positions = 7 }
	147	+aliases = ["MKDS-1,5-7-5.08", "MKDS 1,5/7-5,08", "7 pin screw terminal 5.08", "7 way terminal block 5.08mm", "7P screw terminal 5.08", "7 position terminal block 5.08"]
148	148	standard = "Phoenix Contact"
149	149
150	150	[[presets]]
151	151	id = "MKDS1.5-8-5.08"
152	152	title = "Screw terminal block, 8 positions, 5.08 mm (MKDS 1,5)"
153		-params = { pitch = 5.08, positions = 8 }
154		-aliases = ["MKDS-1,5-8-5.08", "MKDS 1,5/8-5,08", "8 pin screw terminal 5.08", "8 way terminal block 5.08mm", "8P screw terminal 5.08", "8 position terminal block", "8 pin terminal block"]
	153	+params = { series = "MKDS 1,5", pitch = 5.08, positions = 8 }
	154	+aliases = ["MKDS-1,5-8-5.08", "MKDS 1,5/8-5,08", "8 pin screw terminal 5.08", "8 way terminal block 5.08mm", "8P screw terminal 5.08", "8 position terminal block 5.08"]
155	155	standard = "Phoenix Contact"
156	156
157	157	[[presets]]
158	158	id = "MKDS1.5-9-5.08"
159	159	title = "Screw terminal block, 9 positions, 5.08 mm (MKDS 1,5)"
160		-params = { pitch = 5.08, positions = 9 }
161		-aliases = ["MKDS-1,5-9-5.08", "MKDS 1,5/9-5,08", "9 pin screw terminal 5.08", "9 way terminal block 5.08mm", "9P screw terminal 5.08", "9 position terminal block", "9 pin terminal block"]
	160	+params = { series = "MKDS 1,5", pitch = 5.08, positions = 9 }
	161	+aliases = ["MKDS-1,5-9-5.08", "MKDS 1,5/9-5,08", "9 pin screw terminal 5.08", "9 way terminal block 5.08mm", "9P screw terminal 5.08", "9 position terminal block 5.08"]
162	162	standard = "Phoenix Contact"
163	163
164	164	[[presets]]
165	165	id = "MKDS1.5-10-5.08"
166	166	title = "Screw terminal block, 10 positions, 5.08 mm (MKDS 1,5)"
167		-params = { pitch = 5.08, positions = 10 }
168		-aliases = ["MKDS-1,5-10-5.08", "MKDS 1,5/10-5,08", "10 pin screw terminal 5.08", "10 way terminal block 5.08mm", "10P screw terminal 5.08", "10 position terminal block", "10 pin terminal block"]
	167	+params = { series = "MKDS 1,5", pitch = 5.08, positions = 10 }
	168	+aliases = ["MKDS-1,5-10-5.08", "MKDS 1,5/10-5,08", "10 pin screw terminal 5.08", "10 way terminal block 5.08mm", "10P screw terminal 5.08", "10 position terminal block 5.08"]
169	169	standard = "Phoenix Contact"
170	170
171	171	[[presets]]
172	172	id = "MKDS1.5-11-5.08"
173	173	title = "Screw terminal block, 11 positions, 5.08 mm (MKDS 1,5)"
174		-params = { pitch = 5.08, positions = 11 }
175		-aliases = ["MKDS-1,5-11-5.08", "MKDS 1,5/11-5,08", "11 pin screw terminal 5.08", "11 way terminal block 5.08mm", "11P screw terminal 5.08", "11 position terminal block", "11 pin terminal block"]
	174	+params = { series = "MKDS 1,5", pitch = 5.08, positions = 11 }
	175	+aliases = ["MKDS-1,5-11-5.08", "MKDS 1,5/11-5,08", "11 pin screw terminal 5.08", "11 way terminal block 5.08mm", "11P screw terminal 5.08", "11 position terminal block 5.08"]
176	176	standard = "Phoenix Contact"
177	177
178	178	[[presets]]
179	179	id = "MKDS1.5-12-5.08"
180	180	title = "Screw terminal block, 12 positions, 5.08 mm (MKDS 1,5)"
181		-params = { pitch = 5.08, positions = 12 }
182		-aliases = ["MKDS-1,5-12-5.08", "MKDS 1,5/12-5,08", "12 pin screw terminal 5.08", "12 way terminal block 5.08mm", "12P screw terminal 5.08", "12 position terminal block", "12 pin terminal block"]
	181	+params = { series = "MKDS 1,5", pitch = 5.08, positions = 12 }
	182	+aliases = ["MKDS-1,5-12-5.08", "MKDS 1,5/12-5,08", "12 pin screw terminal 5.08", "12 way terminal block 5.08mm", "12P screw terminal 5.08", "12 position terminal block 5.08"]
183	183	standard = "Phoenix Contact"
184	184
185	185	[[presets]]
186	186	id = "MKDS1.5-13-5.08"
187	187	title = "Screw terminal block, 13 positions, 5.08 mm (MKDS 1,5)"
188		-params = { pitch = 5.08, positions = 13 }
189		-aliases = ["MKDS-1,5-13-5.08", "MKDS 1,5/13-5,08", "13 pin screw terminal 5.08", "13 way terminal block 5.08mm", "13P screw terminal 5.08", "13 position terminal block", "13 pin terminal block"]
	188	+params = { series = "MKDS 1,5", pitch = 5.08, positions = 13 }
	189	+aliases = ["MKDS-1,5-13-5.08", "MKDS 1,5/13-5,08", "13 pin screw terminal 5.08", "13 way terminal block 5.08mm", "13P screw terminal 5.08", "13 position terminal block 5.08"]
190	190	standard = "Phoenix Contact"
191	191
192	192	[[presets]]
193	193	id = "MKDS1.5-14-5.08"
194	194	title = "Screw terminal block, 14 positions, 5.08 mm (MKDS 1,5)"
195		-params = { pitch = 5.08, positions = 14 }
196		-aliases = ["MKDS-1,5-14-5.08", "MKDS 1,5/14-5,08", "14 pin screw terminal 5.08", "14 way terminal block 5.08mm", "14P screw terminal 5.08", "14 position terminal block", "14 pin terminal block"]
	195	+params = { series = "MKDS 1,5", pitch = 5.08, positions = 14 }
	196	+aliases = ["MKDS-1,5-14-5.08", "MKDS 1,5/14-5,08", "14 pin screw terminal 5.08", "14 way terminal block 5.08mm", "14P screw terminal 5.08", "14 position terminal block 5.08"]
197	197	standard = "Phoenix Contact"
198	198
199	199	[[presets]]
200	200	id = "MKDS1.5-15-5.08"
201	201	title = "Screw terminal block, 15 positions, 5.08 mm (MKDS 1,5)"
202		-params = { pitch = 5.08, positions = 15 }
203		-aliases = ["MKDS-1,5-15-5.08", "MKDS 1,5/15-5,08", "15 pin screw terminal 5.08", "15 way terminal block 5.08mm", "15P screw terminal 5.08", "15 position terminal block", "15 pin terminal block"]
	202	+params = { series = "MKDS 1,5", pitch = 5.08, positions = 15 }
	203	+aliases = ["MKDS-1,5-15-5.08", "MKDS 1,5/15-5,08", "15 pin screw terminal 5.08", "15 way terminal block 5.08mm", "15P screw terminal 5.08", "15 position terminal block 5.08"]
204	204	standard = "Phoenix Contact"
205	205
206	206	[[presets]]
207	207	id = "MKDS1.5-16-5.08"
208	208	title = "Screw terminal block, 16 positions, 5.08 mm (MKDS 1,5)"
209		-params = { pitch = 5.08, positions = 16 }
210		-aliases = ["MKDS-1,5-16-5.08", "MKDS 1,5/16-5,08", "16 pin screw terminal 5.08", "16 way terminal block 5.08mm", "16P screw terminal 5.08", "16 position terminal block", "16 pin terminal block"]
	209	+params = { series = "MKDS 1,5", pitch = 5.08, positions = 16 }
	210	+aliases = ["MKDS-1,5-16-5.08", "MKDS 1,5/16-5,08", "16 pin screw terminal 5.08", "16 way terminal block 5.08mm", "16P screw terminal 5.08", "16 position terminal block 5.08"]
	211	+standard = "Phoenix Contact"
	212	+
	213	+[[presets]]
	214	+id = "MPT0.5-2-2.54"
	215	+title = "Screw terminal block, 2 positions, 2.54 mm (MPT 0,5)"
	216	+params = { series = "MPT 0,5", pitch = 2.54, positions = 2 }
	217	+aliases = ["MPT-0,5-2-2.54", "MPT 0,5/2-2,54", "2 pin screw terminal 2.54", "2 way terminal block 2.54mm", "2P screw terminal 2.54", "2 position terminal block 2.54"]
	218	+standard = "Phoenix Contact"
	219	+
	220	+[[presets]]
	221	+id = "MPT0.5-3-2.54"
	222	+title = "Screw terminal block, 3 positions, 2.54 mm (MPT 0,5)"
	223	+params = { series = "MPT 0,5", pitch = 2.54, positions = 3 }
	224	+aliases = ["MPT-0,5-3-2.54", "MPT 0,5/3-2,54", "3 pin screw terminal 2.54", "3 way terminal block 2.54mm", "3P screw terminal 2.54", "3 position terminal block 2.54"]
	225	+standard = "Phoenix Contact"
	226	+
	227	+[[presets]]
	228	+id = "MPT0.5-4-2.54"
	229	+title = "Screw terminal block, 4 positions, 2.54 mm (MPT 0,5)"
	230	+params = { series = "MPT 0,5", pitch = 2.54, positions = 4 }
	231	+aliases = ["MPT-0,5-4-2.54", "MPT 0,5/4-2,54", "4 pin screw terminal 2.54", "4 way terminal block 2.54mm", "4P screw terminal 2.54", "4 position terminal block 2.54"]
	232	+standard = "Phoenix Contact"
	233	+
	234	+[[presets]]
	235	+id = "MPT0.5-5-2.54"
	236	+title = "Screw terminal block, 5 positions, 2.54 mm (MPT 0,5)"
	237	+params = { series = "MPT 0,5", pitch = 2.54, positions = 5 }
	238	+aliases = ["MPT-0,5-5-2.54", "MPT 0,5/5-2,54", "5 pin screw terminal 2.54", "5 way terminal block 2.54mm", "5P screw terminal 2.54", "5 position terminal block 2.54"]
	239	+standard = "Phoenix Contact"
	240	+
	241	+[[presets]]
	242	+id = "MPT0.5-6-2.54"
	243	+title = "Screw terminal block, 6 positions, 2.54 mm (MPT 0,5)"
	244	+params = { series = "MPT 0,5", pitch = 2.54, positions = 6 }
	245	+aliases = ["MPT-0,5-6-2.54", "MPT 0,5/6-2,54", "6 pin screw terminal 2.54", "6 way terminal block 2.54mm", "6P screw terminal 2.54", "6 position terminal block 2.54"]
	246	+standard = "Phoenix Contact"
	247	+
	248	+[[presets]]
	249	+id = "MPT0.5-7-2.54"
	250	+title = "Screw terminal block, 7 positions, 2.54 mm (MPT 0,5)"
	251	+params = { series = "MPT 0,5", pitch = 2.54, positions = 7 }
	252	+aliases = ["MPT-0,5-7-2.54", "MPT 0,5/7-2,54", "7 pin screw terminal 2.54", "7 way terminal block 2.54mm", "7P screw terminal 2.54", "7 position terminal block 2.54"]
	253	+standard = "Phoenix Contact"
	254	+
	255	+[[presets]]
	256	+id = "MPT0.5-8-2.54"
	257	+title = "Screw terminal block, 8 positions, 2.54 mm (MPT 0,5)"
	258	+params = { series = "MPT 0,5", pitch = 2.54, positions = 8 }
	259	+aliases = ["MPT-0,5-8-2.54", "MPT 0,5/8-2,54", "8 pin screw terminal 2.54", "8 way terminal block 2.54mm", "8P screw terminal 2.54", "8 position terminal block 2.54"]
	260	+standard = "Phoenix Contact"
	261	+
	262	+[[presets]]
	263	+id = "MPT0.5-9-2.54"
	264	+title = "Screw terminal block, 9 positions, 2.54 mm (MPT 0,5)"
	265	+params = { series = "MPT 0,5", pitch = 2.54, positions = 9 }
	266	+aliases = ["MPT-0,5-9-2.54", "MPT 0,5/9-2,54", "9 pin screw terminal 2.54", "9 way terminal block 2.54mm", "9P screw terminal 2.54", "9 position terminal block 2.54"]
	267	+standard = "Phoenix Contact"
	268	+
	269	+[[presets]]
	270	+id = "MPT0.5-10-2.54"
	271	+title = "Screw terminal block, 10 positions, 2.54 mm (MPT 0,5)"
	272	+params = { series = "MPT 0,5", pitch = 2.54, positions = 10 }
	273	+aliases = ["MPT-0,5-10-2.54", "MPT 0,5/10-2,54", "10 pin screw terminal 2.54", "10 way terminal block 2.54mm", "10P screw terminal 2.54", "10 position terminal block 2.54"]
	274	+standard = "Phoenix Contact"
	275	+
	276	+[[presets]]
	277	+id = "MPT0.5-11-2.54"
	278	+title = "Screw terminal block, 11 positions, 2.54 mm (MPT 0,5)"
	279	+params = { series = "MPT 0,5", pitch = 2.54, positions = 11 }
	280	+aliases = ["MPT-0,5-11-2.54", "MPT 0,5/11-2,54", "11 pin screw terminal 2.54", "11 way terminal block 2.54mm", "11P screw terminal 2.54", "11 position terminal block 2.54"]
	281	+standard = "Phoenix Contact"
	282	+
	283	+[[presets]]
	284	+id = "MPT0.5-12-2.54"
	285	+title = "Screw terminal block, 12 positions, 2.54 mm (MPT 0,5)"
	286	+params = { series = "MPT 0,5", pitch = 2.54, positions = 12 }
	287	+aliases = ["MPT-0,5-12-2.54", "MPT 0,5/12-2,54", "12 pin screw terminal 2.54", "12 way terminal block 2.54mm", "12P screw terminal 2.54", "12 position terminal block 2.54"]
	288	+standard = "Phoenix Contact"
	289	+
	290	+[[presets]]
	291	+id = "PT1.5-2-3.5"
	292	+title = "Screw terminal block, 2 positions, 3.5 mm (PT 1,5)"
	293	+params = { series = "PT 1,5", pitch = 3.5, positions = 2 }
	294	+aliases = ["PT-1,5-2-3.5", "PT 1,5/2-3,5", "2 pin screw terminal 3.5", "2 way terminal block 3.5mm", "2P screw terminal 3.5", "2 position terminal block 3.5"]
	295	+standard = "Phoenix Contact"
	296	+
	297	+[[presets]]
	298	+id = "PT1.5-3-3.5"
	299	+title = "Screw terminal block, 3 positions, 3.5 mm (PT 1,5)"
	300	+params = { series = "PT 1,5", pitch = 3.5, positions = 3 }
	301	+aliases = ["PT-1,5-3-3.5", "PT 1,5/3-3,5", "3 pin screw terminal 3.5", "3 way terminal block 3.5mm", "3P screw terminal 3.5", "3 position terminal block 3.5"]
	302	+standard = "Phoenix Contact"
	303	+
	304	+[[presets]]
	305	+id = "PT1.5-4-3.5"
	306	+title = "Screw terminal block, 4 positions, 3.5 mm (PT 1,5)"
	307	+params = { series = "PT 1,5", pitch = 3.5, positions = 4 }
	308	+aliases = ["PT-1,5-4-3.5", "PT 1,5/4-3,5", "4 pin screw terminal 3.5", "4 way terminal block 3.5mm", "4P screw terminal 3.5", "4 position terminal block 3.5"]
	309	+standard = "Phoenix Contact"
	310	+
	311	+[[presets]]
	312	+id = "PT1.5-5-3.5"
	313	+title = "Screw terminal block, 5 positions, 3.5 mm (PT 1,5)"
	314	+params = { series = "PT 1,5", pitch = 3.5, positions = 5 }
	315	+aliases = ["PT-1,5-5-3.5", "PT 1,5/5-3,5", "5 pin screw terminal 3.5", "5 way terminal block 3.5mm", "5P screw terminal 3.5", "5 position terminal block 3.5"]
	316	+standard = "Phoenix Contact"
	317	+
	318	+[[presets]]
	319	+id = "PT1.5-6-3.5"
	320	+title = "Screw terminal block, 6 positions, 3.5 mm (PT 1,5)"
	321	+params = { series = "PT 1,5", pitch = 3.5, positions = 6 }
	322	+aliases = ["PT-1,5-6-3.5", "PT 1,5/6-3,5", "6 pin screw terminal 3.5", "6 way terminal block 3.5mm", "6P screw terminal 3.5", "6 position terminal block 3.5"]
	323	+standard = "Phoenix Contact"
	324	+
	325	+[[presets]]
	326	+id = "PT1.5-7-3.5"
	327	+title = "Screw terminal block, 7 positions, 3.5 mm (PT 1,5)"
	328	+params = { series = "PT 1,5", pitch = 3.5, positions = 7 }
	329	+aliases = ["PT-1,5-7-3.5", "PT 1,5/7-3,5", "7 pin screw terminal 3.5", "7 way terminal block 3.5mm", "7P screw terminal 3.5", "7 position terminal block 3.5"]
	330	+standard = "Phoenix Contact"
	331	+
	332	+[[presets]]
	333	+id = "PT1.5-8-3.5"
	334	+title = "Screw terminal block, 8 positions, 3.5 mm (PT 1,5)"
	335	+params = { series = "PT 1,5", pitch = 3.5, positions = 8 }
	336	+aliases = ["PT-1,5-8-3.5", "PT 1,5/8-3,5", "8 pin screw terminal 3.5", "8 way terminal block 3.5mm", "8P screw terminal 3.5", "8 position terminal block 3.5"]
	337	+standard = "Phoenix Contact"
	338	+
	339	+[[presets]]
	340	+id = "PT1.5-9-3.5"
	341	+title = "Screw terminal block, 9 positions, 3.5 mm (PT 1,5)"
	342	+params = { series = "PT 1,5", pitch = 3.5, positions = 9 }
	343	+aliases = ["PT-1,5-9-3.5", "PT 1,5/9-3,5", "9 pin screw terminal 3.5", "9 way terminal block 3.5mm", "9P screw terminal 3.5", "9 position terminal block 3.5"]
	344	+standard = "Phoenix Contact"
	345	+
	346	+[[presets]]
	347	+id = "PT1.5-10-3.5"
	348	+title = "Screw terminal block, 10 positions, 3.5 mm (PT 1,5)"
	349	+params = { series = "PT 1,5", pitch = 3.5, positions = 10 }
	350	+aliases = ["PT-1,5-10-3.5", "PT 1,5/10-3,5", "10 pin screw terminal 3.5", "10 way terminal block 3.5mm", "10P screw terminal 3.5", "10 position terminal block 3.5"]
	351	+standard = "Phoenix Contact"
	352	+
	353	+[[presets]]
	354	+id = "PT1.5-11-3.5"
	355	+title = "Screw terminal block, 11 positions, 3.5 mm (PT 1,5)"
	356	+params = { series = "PT 1,5", pitch = 3.5, positions = 11 }
	357	+aliases = ["PT-1,5-11-3.5", "PT 1,5/11-3,5", "11 pin screw terminal 3.5", "11 way terminal block 3.5mm", "11P screw terminal 3.5", "11 position terminal block 3.5"]
	358	+standard = "Phoenix Contact"
	359	+
	360	+[[presets]]
	361	+id = "PT1.5-12-3.5"
	362	+title = "Screw terminal block, 12 positions, 3.5 mm (PT 1,5)"
	363	+params = { series = "PT 1,5", pitch = 3.5, positions = 12 }
	364	+aliases = ["PT-1,5-12-3.5", "PT 1,5/12-3,5", "12 pin screw terminal 3.5", "12 way terminal block 3.5mm", "12P screw terminal 3.5", "12 position terminal block 3.5"]
	365	+standard = "Phoenix Contact"
	366	+
	367	+[[presets]]
	368	+id = "PT1.5-13-3.5"
	369	+title = "Screw terminal block, 13 positions, 3.5 mm (PT 1,5)"
	370	+params = { series = "PT 1,5", pitch = 3.5, positions = 13 }
	371	+aliases = ["PT-1,5-13-3.5", "PT 1,5/13-3,5", "13 pin screw terminal 3.5", "13 way terminal block 3.5mm", "13P screw terminal 3.5", "13 position terminal block 3.5"]
	372	+standard = "Phoenix Contact"
	373	+
	374	+[[presets]]
	375	+id = "PT1.5-14-3.5"
	376	+title = "Screw terminal block, 14 positions, 3.5 mm (PT 1,5)"
	377	+params = { series = "PT 1,5", pitch = 3.5, positions = 14 }
	378	+aliases = ["PT-1,5-14-3.5", "PT 1,5/14-3,5", "14 pin screw terminal 3.5", "14 way terminal block 3.5mm", "14P screw terminal 3.5", "14 position terminal block 3.5"]
	379	+standard = "Phoenix Contact"
	380	+
	381	+[[presets]]
	382	+id = "PT1.5-15-3.5"
	383	+title = "Screw terminal block, 15 positions, 3.5 mm (PT 1,5)"
	384	+params = { series = "PT 1,5", pitch = 3.5, positions = 15 }
	385	+aliases = ["PT-1,5-15-3.5", "PT 1,5/15-3,5", "15 pin screw terminal 3.5", "15 way terminal block 3.5mm", "15P screw terminal 3.5", "15 position terminal block 3.5"]
	386	+standard = "Phoenix Contact"
	387	+
	388	+[[presets]]
	389	+id = "PT1.5-16-3.5"
	390	+title = "Screw terminal block, 16 positions, 3.5 mm (PT 1,5)"
	391	+params = { series = "PT 1,5", pitch = 3.5, positions = 16 }
	392	+aliases = ["PT-1,5-16-3.5", "PT 1,5/16-3,5", "16 pin screw terminal 3.5", "16 way terminal block 3.5mm", "16P screw terminal 3.5", "16 position terminal block 3.5"]
211	393	standard = "Phoenix Contact"
212	394
213	395	[[presets]]
214	396	id = "MKDS1.5-2-5.08-simple"
215	397	title = "Screw terminal block, 2 positions, 5.08 mm, simple"
216		-params = { pitch = 5.08, positions = 2, detail = "simple" }
	398	+params = { series = "MKDS 1,5", pitch = 5.08, positions = 2, detail = "simple" }
217	399	aliases = ["MKDS 1,5/2-5,08 simple"]
218	400	standard = "Phoenix Contact"
219	401

README.md +7 −2

Copy diff

		@@ -1,6 +1,6 @@
1	1	# Screw terminal block
2	2
3		-A PCB screw terminal block of the Phoenix Contact MKDS 1,5 type, 5.0 or 5.08 mm pitch, 2 to 16 positions. Pin 1 is at the origin, the row runs along +X, the housing sits on the XY plane with the wire entries facing -Y and the screws on top, and the solder pins go down through the board.
	3	+A PCB screw terminal block of the Phoenix Contact MKDS 1,5 (5.0 or 5.08 mm pitch), PT 1,5 (3.5 mm) or MPT 0,5 (2.54 mm) type. Pin 1 is at the origin, the row runs along +X, the housing sits on the XY plane with the wire entries facing -Y and the screws on top, and the solder pins go down through the board.
4	4
5	5	## Source
6	6
		@@ -12,7 +12,12 @@
12	12
13	13	The dimensional drawing (page 8) shows the pins 4.6 from the wire-entry face, and the same housing with 5 and 5.08 mm pitch.
14	14
	15	+- PT 1,5: data sheet *PT 1,5/ 5-3,5-H* (1984646), Drawings page 4, a copy at <https://img.pcbx.com/erp/file/part/spec/1984646-Phoenix%20Contact.pdf>: width a + 3.5, height 9.2, length 7.6, pins 4.5 long, 3.1 from the back face.
	16	+- MPT 0,5: data sheet *MPT 0,5/ 2-2,54* (1725656), page 5 and dimensional drawing page 6, a copy at <https://static.chipdip.ru/lib/776/DOC031776037.pdf>: width 5.54 for 2 positions (1.5 past each end pin), height 8.5, length 6.2, pins 3.5 long, 0.5 x 0.9, 3.1 from the back face.
	17	+
	18	+Each data sheet is for one position count; the others follow the drawing's a + pitch rule.
	19	+
15	20	**Proportions, for looks only:** the side profile's step and slope, and the wire entry and screw opening sizes. The screws and clamps aren't modelled. The housing is PA; the part uses `pa6`, green.
16	21
17		-The 3.81 mm MKDS, the PT and MPT families and other makers' blocks aren't here yet; see `COVERAGE.md`.
	22	+The 3.81 mm MKDS, PT 1,5 at 5.0 mm and other makers' blocks aren't here yet; see `COVERAGE.md`.
18	23