Compare versions

4 files changed, +136 −6 1.2.0: Vertical MSTBVA 2,5 headers at 5.08 mm. Right-angle parts are unchanged.

part.py +18 −2

@@ -3,6 +3,7 @@

from steve import Model

series = "MSTBA 2,5" # Series

style = "right-angle" # right-angle or vertical (vertical: MSTBVA 2,5)

pitch = 5.08 # mm Pitch

positions = 2 # Positions

detail = "full" # full: the opening, the mating pins and the solder pins; simple: the housing's outline

@@ -16,10 +17,15 @@

"MSTBA 2,5": ((5.0, 5.08), 12, 8.6, 3.5, 2, {5.0: 3.5, 5.08: 3.54}, 1.2),

"MC 1,5": ((3.81,), 9.2, 7.25, 3.4, 1.2, {3.81: 2.6}, 0.8),

}

pitches, LENGTH, HEIGHT, PIN_LENGTH, PIN_FROM_BACK, ENDS, PIN = SERIES[series]

# Vertical, MSTBVA 2,5: data sheet MSTBVA 2,5/ 2-G-5,08 (1755736, 24 Feb 2024), Dimensions p. 3: width 12.16 for 2 positions (a + 7.08), length 8.6, installed

# height 12, solder pins 3.9 long, 1 x 1; the July 2003 edition's dimensioned drawing and drilling diagram (p. 4): pins 3.8 from one face, 3.54 past each end pin.

VERTICAL = ((5.08,), 8.6, 12, 3.9, 3.8, {5.08: 3.54}, 1.0)

pitches, LENGTH, HEIGHT, PIN_LENGTH, PIN_FROM_BACK, ENDS, PIN = VERTICAL if style == "vertical" else SERIES[series]

# the wall and the mating pins' reach are proportions, for looks: the data sheets don't dimension them

SHORT = 1.5 # the mating pins stop this far short of the opening, where the plug's contacts meet them

WALL = 1.0 if series == "MSTBA 2,5" else 0.8

if style == "vertical" and series != "MSTBA 2,5":

raise ValueError("The vertical header here is MSTBVA 2,5 (5.08 mm).")

if pitch not in pitches or not 2 <= positions <= 16:

raise ValueError(f"{series} comes in pitch {pitches}, 2 to 16 positions.")

@@ -32,7 +38,17 @@

with model.sketch("housing_sketch", on="XY", name="Housing") as sk:

sk.rect("housing_rect", (x0, front), (x0 + width, back))

model.extrude("housing", "housing_sketch", distance=HEIGHT, name="Housing")

if detail == "full":

if detail == "full" and style == "vertical":

model.plane("top_plane", on="XY", offset=HEIGHT, name="Opening")

with model.sketch("opening_sketch", on="top_plane", name="Opening") as sk:

sk.rect("opening_rect", (x0 + WALL, front + WALL), (x0 + width - WALL, back - WALL))

model.extrude("opening", "opening_sketch", distance=-(HEIGHT - WALL), op="cut", name="Opening")

model.plane("pin_plane", on="XY", offset=-PIN_LENGTH, name="Pins")

with model.sketch("pins_sketch", on="pin_plane", name="Pins") as sk:

for i in range(positions):

sk.rect(f"pin_{i}", (i * pitch - PIN / 2, -PIN / 2), (i * pitch + PIN / 2, PIN / 2))

model.extrude("pins", "pins_sketch", distance=PIN_LENGTH + HEIGHT - SHORT, name="Pins")

elif detail == "full":

model.plane("opening_plane", on="XZ", offset=-front, name="Opening")

with model.sketch("opening_sketch", on="opening_plane", name="Opening") as sk:

sk.rect("opening_rect", (x0 + WALL, WALL), (x0 + width - WALL, HEIGHT - WALL))

--- 1.1.0/part.py
+++ 1.2.0/part.py
@@ -3,6 +3,7 @@
 from steve import Model
 
 series = "MSTBA 2,5"  # Series
+style = "right-angle"  # right-angle or vertical (vertical: MSTBVA 2,5)
 pitch = 5.08  # mm Pitch
 positions = 2  # Positions
 detail = "full"  # full: the opening, the mating pins and the solder pins; simple: the housing's outline
@@ -16,10 +17,15 @@
     "MSTBA 2,5": ((5.0, 5.08), 12, 8.6, 3.5, 2, {5.0: 3.5, 5.08: 3.54}, 1.2),
     "MC 1,5": ((3.81,), 9.2, 7.25, 3.4, 1.2, {3.81: 2.6}, 0.8),
 }
-pitches, LENGTH, HEIGHT, PIN_LENGTH, PIN_FROM_BACK, ENDS, PIN = SERIES[series]
+# Vertical, MSTBVA 2,5: data sheet MSTBVA 2,5/ 2-G-5,08 (1755736, 24 Feb 2024), Dimensions p. 3: width 12.16 for 2 positions (a + 7.08), length 8.6, installed
+# height 12, solder pins 3.9 long, 1 x 1; the July 2003 edition's dimensioned drawing and drilling diagram (p. 4): pins 3.8 from one face, 3.54 past each end pin.
+VERTICAL = ((5.08,), 8.6, 12, 3.9, 3.8, {5.08: 3.54}, 1.0)
+pitches, LENGTH, HEIGHT, PIN_LENGTH, PIN_FROM_BACK, ENDS, PIN = VERTICAL if style == "vertical" else SERIES[series]
 # the wall and the mating pins' reach are proportions, for looks: the data sheets don't dimension them
 SHORT = 1.5   # the mating pins stop this far short of the opening, where the plug's contacts meet them
 WALL = 1.0 if series == "MSTBA 2,5" else 0.8
+if style == "vertical" and series != "MSTBA 2,5":
+    raise ValueError("The vertical header here is MSTBVA 2,5 (5.08 mm).")
 if pitch not in pitches or not 2 <= positions <= 16:
     raise ValueError(f"{series} comes in pitch {pitches}, 2 to 16 positions.")
 
@@ -32,7 +38,17 @@
 with model.sketch("housing_sketch", on="XY", name="Housing") as sk:
     sk.rect("housing_rect", (x0, front), (x0 + width, back))
 model.extrude("housing", "housing_sketch", distance=HEIGHT, name="Housing")
-if detail == "full":
+if detail == "full" and style == "vertical":
+    model.plane("top_plane", on="XY", offset=HEIGHT, name="Opening")
+    with model.sketch("opening_sketch", on="top_plane", name="Opening") as sk:
+        sk.rect("opening_rect", (x0 + WALL, front + WALL), (x0 + width - WALL, back - WALL))
+    model.extrude("opening", "opening_sketch", distance=-(HEIGHT - WALL), op="cut", name="Opening")
+    model.plane("pin_plane", on="XY", offset=-PIN_LENGTH, name="Pins")
+    with model.sketch("pins_sketch", on="pin_plane", name="Pins") as sk:
+        for i in range(positions):
+            sk.rect(f"pin_{i}", (i * pitch - PIN / 2, -PIN / 2), (i * pitch + PIN / 2, PIN / 2))
+    model.extrude("pins", "pins_sketch", distance=PIN_LENGTH + HEIGHT - SHORT, name="Pins")
+elif detail == "full":
     model.plane("opening_plane", on="XZ", offset=-front, name="Opening")
     with model.sketch("opening_sketch", on="opening_plane", name="Opening") as sk:
         sk.rect("opening_rect", (x0 + WALL, WALL), (x0 + width - WALL, HEIGHT - WALL))

pypart.toml +10 −3

@@ -1,9 +1,9 @@

name = "steve/pluggable-terminal-header"

version = "1.1.0"

version = "1.2.0"

runtime = "steve"

license = "MIT"

summary = "PCB header for pluggable terminal blocks, right-angle: Phoenix Contact MSTBA 2,5 (5.0, 5.08 mm) and MC 1,5 (3.81 mm) types, 2 to 16 positions."

changes = "MC 1,5 headers at 3.81 mm. MSTBA 2,5 parts are unchanged."

summary = "PCB header for pluggable terminal blocks: right-angle Phoenix Contact MSTBA 2,5 (5.0, 5.08 mm) and MC 1,5 (3.81 mm) types, and vertical MSTBVA 2,5 (5.08 mm), 2 to 16 positions."

changes = "Vertical MSTBVA 2,5 headers at 5.08 mm. Right-angle parts are unchanged."

description = """Right-angle PCB header of the MSTBA 2,5 or MC 1,5 type, with its opening, mating pins and solder pins. Width, length, height and pins from Phoenix Contact's data sheets. See the README."""

tags = ["terminal-block", "pluggable", "header", "phoenix", "mstb", "connector", "electronics"]

@@ -12,6 +12,13 @@

default = "MSTBA 2,5"

choices = ["MSTBA 2,5", "MC 1,5"]

label = "Series"

[parameters.style]

type = "choice"

default = "right-angle"

choices = ["right-angle", "vertical"]

label = "Style"

description = "vertical: MSTBVA 2,5 at 5.08 mm."

[parameters.pitch]

type = "choice"

--- 1.1.0/pypart.toml
+++ 1.2.0/pypart.toml
@@ -1,9 +1,9 @@
 name = "steve/pluggable-terminal-header"
-version = "1.1.0"
+version = "1.2.0"
 runtime = "steve"
 license = "MIT"
-summary = "PCB header for pluggable terminal blocks, right-angle: Phoenix Contact MSTBA 2,5 (5.0, 5.08 mm) and MC 1,5 (3.81 mm) types, 2 to 16 positions."
-changes = "MC 1,5 headers at 3.81 mm. MSTBA 2,5 parts are unchanged."
+summary = "PCB header for pluggable terminal blocks: right-angle Phoenix Contact MSTBA 2,5 (5.0, 5.08 mm) and MC 1,5 (3.81 mm) types, and vertical MSTBVA 2,5 (5.08 mm), 2 to 16 positions."
+changes = "Vertical MSTBVA 2,5 headers at 5.08 mm. Right-angle parts are unchanged."
 description = """Right-angle PCB header of the MSTBA 2,5 or MC 1,5 type, with its opening, mating pins and solder pins. Width, length, height and pins from Phoenix Contact's data sheets. See the README."""
 tags = ["terminal-block", "pluggable", "header", "phoenix", "mstb", "connector", "electronics"]
 
@@ -12,6 +12,13 @@
 default = "MSTBA 2,5"
 choices = ["MSTBA 2,5", "MC 1,5"]
 label = "Series"
+
+[parameters.style]
+type = "choice"
+default = "right-angle"
+choices = ["right-angle", "vertical"]
+label = "Style"
+description = "vertical: MSTBVA 2,5 at 5.08 mm."
 
 [parameters.pitch]
 type = "choice"

presets.toml +105 −0

@@ -316,6 +316,111 @@

316

standard = "Phoenix Contact"

317

318

[[presets]]

319

id = "MSTBVA2.5-2-G-5.08"

320

title = "Pluggable terminal header, 2 positions, 5.08 mm, vertical (MSTBVA 2,5)"

321

params = { series = "MSTBA 2,5", style = "vertical", pitch = 5.08, positions = 2 }

322

aliases = ["MSTBVA 2,5/2-G-5,08", "2 pin vertical pluggable terminal header 5.08", "2 way vertical pluggable terminal block 5.08mm"]

323

standard = "Phoenix Contact"

324

325

[[presets]]

326

id = "MSTBVA2.5-3-G-5.08"

327

title = "Pluggable terminal header, 3 positions, 5.08 mm, vertical (MSTBVA 2,5)"

328

params = { series = "MSTBA 2,5", style = "vertical", pitch = 5.08, positions = 3 }

329

aliases = ["MSTBVA 2,5/3-G-5,08", "3 pin vertical pluggable terminal header 5.08", "3 way vertical pluggable terminal block 5.08mm"]

330

standard = "Phoenix Contact"

331

332

[[presets]]

333

id = "MSTBVA2.5-4-G-5.08"

334

title = "Pluggable terminal header, 4 positions, 5.08 mm, vertical (MSTBVA 2,5)"

335

params = { series = "MSTBA 2,5", style = "vertical", pitch = 5.08, positions = 4 }

336

aliases = ["MSTBVA 2,5/4-G-5,08", "4 pin vertical pluggable terminal header 5.08", "4 way vertical pluggable terminal block 5.08mm"]

337

standard = "Phoenix Contact"

338

339

[[presets]]

340

id = "MSTBVA2.5-5-G-5.08"

341

title = "Pluggable terminal header, 5 positions, 5.08 mm, vertical (MSTBVA 2,5)"

342

params = { series = "MSTBA 2,5", style = "vertical", pitch = 5.08, positions = 5 }

343

aliases = ["MSTBVA 2,5/5-G-5,08", "5 pin vertical pluggable terminal header 5.08", "5 way vertical pluggable terminal block 5.08mm"]

344

standard = "Phoenix Contact"

345

346

[[presets]]

347

id = "MSTBVA2.5-6-G-5.08"

348

title = "Pluggable terminal header, 6 positions, 5.08 mm, vertical (MSTBVA 2,5)"

349

params = { series = "MSTBA 2,5", style = "vertical", pitch = 5.08, positions = 6 }

350

aliases = ["MSTBVA 2,5/6-G-5,08", "6 pin vertical pluggable terminal header 5.08", "6 way vertical pluggable terminal block 5.08mm"]

351

standard = "Phoenix Contact"

352

353

[[presets]]

354

id = "MSTBVA2.5-7-G-5.08"

355

title = "Pluggable terminal header, 7 positions, 5.08 mm, vertical (MSTBVA 2,5)"

356

params = { series = "MSTBA 2,5", style = "vertical", pitch = 5.08, positions = 7 }

357

aliases = ["MSTBVA 2,5/7-G-5,08", "7 pin vertical pluggable terminal header 5.08", "7 way vertical pluggable terminal block 5.08mm"]

358

standard = "Phoenix Contact"

359

360

[[presets]]

361

id = "MSTBVA2.5-8-G-5.08"

362

title = "Pluggable terminal header, 8 positions, 5.08 mm, vertical (MSTBVA 2,5)"

363

params = { series = "MSTBA 2,5", style = "vertical", pitch = 5.08, positions = 8 }

364

aliases = ["MSTBVA 2,5/8-G-5,08", "8 pin vertical pluggable terminal header 5.08", "8 way vertical pluggable terminal block 5.08mm"]

365

standard = "Phoenix Contact"

366

367

[[presets]]

368

id = "MSTBVA2.5-9-G-5.08"

369

title = "Pluggable terminal header, 9 positions, 5.08 mm, vertical (MSTBVA 2,5)"

370

params = { series = "MSTBA 2,5", style = "vertical", pitch = 5.08, positions = 9 }

371

aliases = ["MSTBVA 2,5/9-G-5,08", "9 pin vertical pluggable terminal header 5.08", "9 way vertical pluggable terminal block 5.08mm"]

372

standard = "Phoenix Contact"

373

374

[[presets]]

375

id = "MSTBVA2.5-10-G-5.08"

376

title = "Pluggable terminal header, 10 positions, 5.08 mm, vertical (MSTBVA 2,5)"

377

params = { series = "MSTBA 2,5", style = "vertical", pitch = 5.08, positions = 10 }

378

aliases = ["MSTBVA 2,5/10-G-5,08", "10 pin vertical pluggable terminal header 5.08", "10 way vertical pluggable terminal block 5.08mm"]

379

standard = "Phoenix Contact"

380

381

[[presets]]

382

id = "MSTBVA2.5-11-G-5.08"

383

title = "Pluggable terminal header, 11 positions, 5.08 mm, vertical (MSTBVA 2,5)"

384

params = { series = "MSTBA 2,5", style = "vertical", pitch = 5.08, positions = 11 }

385

aliases = ["MSTBVA 2,5/11-G-5,08", "11 pin vertical pluggable terminal header 5.08", "11 way vertical pluggable terminal block 5.08mm"]

386

standard = "Phoenix Contact"

387

388

[[presets]]

389

id = "MSTBVA2.5-12-G-5.08"

390

title = "Pluggable terminal header, 12 positions, 5.08 mm, vertical (MSTBVA 2,5)"

391

params = { series = "MSTBA 2,5", style = "vertical", pitch = 5.08, positions = 12 }

392

aliases = ["MSTBVA 2,5/12-G-5,08", "12 pin vertical pluggable terminal header 5.08", "12 way vertical pluggable terminal block 5.08mm"]

393

standard = "Phoenix Contact"

394

395

[[presets]]

396

id = "MSTBVA2.5-13-G-5.08"

397

title = "Pluggable terminal header, 13 positions, 5.08 mm, vertical (MSTBVA 2,5)"

398

params = { series = "MSTBA 2,5", style = "vertical", pitch = 5.08, positions = 13 }

399

aliases = ["MSTBVA 2,5/13-G-5,08", "13 pin vertical pluggable terminal header 5.08", "13 way vertical pluggable terminal block 5.08mm"]

400

standard = "Phoenix Contact"

401

402

[[presets]]

403

id = "MSTBVA2.5-14-G-5.08"

404

title = "Pluggable terminal header, 14 positions, 5.08 mm, vertical (MSTBVA 2,5)"

405

params = { series = "MSTBA 2,5", style = "vertical", pitch = 5.08, positions = 14 }

406

aliases = ["MSTBVA 2,5/14-G-5,08", "14 pin vertical pluggable terminal header 5.08", "14 way vertical pluggable terminal block 5.08mm"]

407

standard = "Phoenix Contact"

408

409

[[presets]]

410

id = "MSTBVA2.5-15-G-5.08"

411

title = "Pluggable terminal header, 15 positions, 5.08 mm, vertical (MSTBVA 2,5)"

412

params = { series = "MSTBA 2,5", style = "vertical", pitch = 5.08, positions = 15 }

413

aliases = ["MSTBVA 2,5/15-G-5,08", "15 pin vertical pluggable terminal header 5.08", "15 way vertical pluggable terminal block 5.08mm"]

414

standard = "Phoenix Contact"

415

416

[[presets]]

417

id = "MSTBVA2.5-16-G-5.08"

418

title = "Pluggable terminal header, 16 positions, 5.08 mm, vertical (MSTBVA 2,5)"

419

params = { series = "MSTBA 2,5", style = "vertical", pitch = 5.08, positions = 16 }

420

aliases = ["MSTBVA 2,5/16-G-5,08", "16 pin vertical pluggable terminal header 5.08", "16 way vertical pluggable terminal block 5.08mm"]

421

standard = "Phoenix Contact"

422

423

[[presets]]

319

424

id = "MSTBA2.5-2-G-5.08-simple"

320

425

title = "Pluggable terminal header, 2 positions, 5.08 mm, simple"

321

426

params = { series = "MSTBA 2,5", pitch = 5.08, positions = 2, detail = "simple" }

--- 1.1.0/presets.toml
+++ 1.2.0/presets.toml
@@ -316,6 +316,111 @@
 standard = "Phoenix Contact"
 
 [[presets]]
+id = "MSTBVA2.5-2-G-5.08"
+title = "Pluggable terminal header, 2 positions, 5.08 mm, vertical (MSTBVA 2,5)"
+params = { series = "MSTBA 2,5", style = "vertical", pitch = 5.08, positions = 2 }
+aliases = ["MSTBVA 2,5/2-G-5,08", "2 pin vertical pluggable terminal header 5.08", "2 way vertical pluggable terminal block 5.08mm"]
+standard = "Phoenix Contact"
+
+[[presets]]
+id = "MSTBVA2.5-3-G-5.08"
+title = "Pluggable terminal header, 3 positions, 5.08 mm, vertical (MSTBVA 2,5)"
+params = { series = "MSTBA 2,5", style = "vertical", pitch = 5.08, positions = 3 }
+aliases = ["MSTBVA 2,5/3-G-5,08", "3 pin vertical pluggable terminal header 5.08", "3 way vertical pluggable terminal block 5.08mm"]
+standard = "Phoenix Contact"
+
+[[presets]]
+id = "MSTBVA2.5-4-G-5.08"
+title = "Pluggable terminal header, 4 positions, 5.08 mm, vertical (MSTBVA 2,5)"
+params = { series = "MSTBA 2,5", style = "vertical", pitch = 5.08, positions = 4 }
+aliases = ["MSTBVA 2,5/4-G-5,08", "4 pin vertical pluggable terminal header 5.08", "4 way vertical pluggable terminal block 5.08mm"]
+standard = "Phoenix Contact"
+
+[[presets]]
+id = "MSTBVA2.5-5-G-5.08"
+title = "Pluggable terminal header, 5 positions, 5.08 mm, vertical (MSTBVA 2,5)"
+params = { series = "MSTBA 2,5", style = "vertical", pitch = 5.08, positions = 5 }
+aliases = ["MSTBVA 2,5/5-G-5,08", "5 pin vertical pluggable terminal header 5.08", "5 way vertical pluggable terminal block 5.08mm"]
+standard = "Phoenix Contact"
+
+[[presets]]
+id = "MSTBVA2.5-6-G-5.08"
+title = "Pluggable terminal header, 6 positions, 5.08 mm, vertical (MSTBVA 2,5)"
+params = { series = "MSTBA 2,5", style = "vertical", pitch = 5.08, positions = 6 }
+aliases = ["MSTBVA 2,5/6-G-5,08", "6 pin vertical pluggable terminal header 5.08", "6 way vertical pluggable terminal block 5.08mm"]
+standard = "Phoenix Contact"
+
+[[presets]]
+id = "MSTBVA2.5-7-G-5.08"
+title = "Pluggable terminal header, 7 positions, 5.08 mm, vertical (MSTBVA 2,5)"
+params = { series = "MSTBA 2,5", style = "vertical", pitch = 5.08, positions = 7 }
+aliases = ["MSTBVA 2,5/7-G-5,08", "7 pin vertical pluggable terminal header 5.08", "7 way vertical pluggable terminal block 5.08mm"]
+standard = "Phoenix Contact"
+
+[[presets]]
+id = "MSTBVA2.5-8-G-5.08"
+title = "Pluggable terminal header, 8 positions, 5.08 mm, vertical (MSTBVA 2,5)"
+params = { series = "MSTBA 2,5", style = "vertical", pitch = 5.08, positions = 8 }
+aliases = ["MSTBVA 2,5/8-G-5,08", "8 pin vertical pluggable terminal header 5.08", "8 way vertical pluggable terminal block 5.08mm"]
+standard = "Phoenix Contact"
+
+[[presets]]
+id = "MSTBVA2.5-9-G-5.08"
+title = "Pluggable terminal header, 9 positions, 5.08 mm, vertical (MSTBVA 2,5)"
+params = { series = "MSTBA 2,5", style = "vertical", pitch = 5.08, positions = 9 }
+aliases = ["MSTBVA 2,5/9-G-5,08", "9 pin vertical pluggable terminal header 5.08", "9 way vertical pluggable terminal block 5.08mm"]
+standard = "Phoenix Contact"
+
+[[presets]]
+id = "MSTBVA2.5-10-G-5.08"
+title = "Pluggable terminal header, 10 positions, 5.08 mm, vertical (MSTBVA 2,5)"
+params = { series = "MSTBA 2,5", style = "vertical", pitch = 5.08, positions = 10 }
+aliases = ["MSTBVA 2,5/10-G-5,08", "10 pin vertical pluggable terminal header 5.08", "10 way vertical pluggable terminal block 5.08mm"]
+standard = "Phoenix Contact"
+
+[[presets]]
+id = "MSTBVA2.5-11-G-5.08"
+title = "Pluggable terminal header, 11 positions, 5.08 mm, vertical (MSTBVA 2,5)"
+params = { series = "MSTBA 2,5", style = "vertical", pitch = 5.08, positions = 11 }
+aliases = ["MSTBVA 2,5/11-G-5,08", "11 pin vertical pluggable terminal header 5.08", "11 way vertical pluggable terminal block 5.08mm"]
+standard = "Phoenix Contact"
+
+[[presets]]
+id = "MSTBVA2.5-12-G-5.08"
+title = "Pluggable terminal header, 12 positions, 5.08 mm, vertical (MSTBVA 2,5)"
+params = { series = "MSTBA 2,5", style = "vertical", pitch = 5.08, positions = 12 }
+aliases = ["MSTBVA 2,5/12-G-5,08", "12 pin vertical pluggable terminal header 5.08", "12 way vertical pluggable terminal block 5.08mm"]
+standard = "Phoenix Contact"
+
+[[presets]]
+id = "MSTBVA2.5-13-G-5.08"
+title = "Pluggable terminal header, 13 positions, 5.08 mm, vertical (MSTBVA 2,5)"
+params = { series = "MSTBA 2,5", style = "vertical", pitch = 5.08, positions = 13 }
+aliases = ["MSTBVA 2,5/13-G-5,08", "13 pin vertical pluggable terminal header 5.08", "13 way vertical pluggable terminal block 5.08mm"]
+standard = "Phoenix Contact"
+
+[[presets]]
+id = "MSTBVA2.5-14-G-5.08"
+title = "Pluggable terminal header, 14 positions, 5.08 mm, vertical (MSTBVA 2,5)"
+params = { series = "MSTBA 2,5", style = "vertical", pitch = 5.08, positions = 14 }
+aliases = ["MSTBVA 2,5/14-G-5,08", "14 pin vertical pluggable terminal header 5.08", "14 way vertical pluggable terminal block 5.08mm"]
+standard = "Phoenix Contact"
+
+[[presets]]
+id = "MSTBVA2.5-15-G-5.08"
+title = "Pluggable terminal header, 15 positions, 5.08 mm, vertical (MSTBVA 2,5)"
+params = { series = "MSTBA 2,5", style = "vertical", pitch = 5.08, positions = 15 }
+aliases = ["MSTBVA 2,5/15-G-5,08", "15 pin vertical pluggable terminal header 5.08", "15 way vertical pluggable terminal block 5.08mm"]
+standard = "Phoenix Contact"
+
+[[presets]]
+id = "MSTBVA2.5-16-G-5.08"
+title = "Pluggable terminal header, 16 positions, 5.08 mm, vertical (MSTBVA 2,5)"
+params = { series = "MSTBA 2,5", style = "vertical", pitch = 5.08, positions = 16 }
+aliases = ["MSTBVA 2,5/16-G-5,08", "16 pin vertical pluggable terminal header 5.08", "16 way vertical pluggable terminal block 5.08mm"]
+standard = "Phoenix Contact"
+
+[[presets]]
 id = "MSTBA2.5-2-G-5.08-simple"
 title = "Pluggable terminal header, 2 positions, 5.08 mm, simple"
 params = { series = "MSTBA 2,5", pitch = 5.08, positions = 2, detail = "simple" }

README.md +3 −1

@@ -15,5 +15,7 @@

**Proportions, for looks only:** the MSTBA pin section (1.2), the wall, and the mating pins' reach. The data sheet's side view doesn't dimension the reach, so the pins run to 1.5 mm short of the opening, where the plug's contacts meet them. The plug isn't part of this header. The housing is PA, modelled as `pa6`, green.

Vertical (MSTBVA, MCV), flanged (GF) and 3.5 mm MC headers aren't here yet; see `COVERAGE.md`.

Vertical MSTBVA 2,5 at 5.08 mm: data sheet *MSTBVA 2,5/ 2-G-5,08* (1755736), Dimensions page 3 of the 24 Feb 2024 edition, a copy at <https://static.chipdip.ru/lib/759/DOC041759173.pdf>: width 12.16 for 2 positions (a + 7.08), length 8.6, installed height 12, solder pins 3.9 long and 1 x 1. The pins' place, 3.8 from one face and 3.54 past each end pin, is from the July 2003 edition's dimensioned drawing and drilling diagram, page 4, a copy at <https://tvsat.com.pl/PDF/1/1755736-phoenix.pdf>. Vertical: the opening faces up and the pins stand 1.5 mm below the top.

MSTBVA at 5.0 mm, MCV, flanged (GF) and 3.5 mm MC headers aren't here yet; see `COVERAGE.md`.

--- 1.1.0/README.md
+++ 1.2.0/README.md
@@ -15,4 +15,6 @@
 
 **Proportions, for looks only:** the MSTBA pin section (1.2), the wall, and the mating pins' reach. The data sheet's side view doesn't dimension the reach, so the pins run to 1.5 mm short of the opening, where the plug's contacts meet them. The plug isn't part of this header. The housing is PA, modelled as `pa6`, green.
 
-Vertical (MSTBVA, MCV), flanged (GF) and 3.5 mm MC headers aren't here yet; see `COVERAGE.md`.
+Vertical MSTBVA 2,5 at 5.08 mm: data sheet *MSTBVA 2,5/ 2-G-5,08* (1755736), Dimensions page 3 of the 24 Feb 2024 edition, a copy at <https://static.chipdip.ru/lib/759/DOC041759173.pdf>: width 12.16 for 2 positions (a + 7.08), length 8.6, installed height 12, solder pins 3.9 long and 1 x 1. The pins' place, 3.8 from one face and 3.54 past each end pin, is from the July 2003 edition's dimensioned drawing and drilling diagram, page 4, a copy at <https://tvsat.com.pl/PDF/1/1755736-phoenix.pdf>. Vertical: the opening faces up and the pins stand 1.5 mm below the top.
+
+MSTBVA at 5.0 mm, MCV, flanged (GF) and 3.5 mm MC headers aren't here yet; see `COVERAGE.md`.