4 files changed, +620 −20 1.1.0: Right-angle 2.54 mm headers.

part.py +43 −14

Copy diff

		@@ -1,10 +1,12 @@
1		-"""Straight through-hole pin header, 2.54 mm and 2.00 mm pitch, one or two rows. Pin 1 is at the origin, the row along +X, the second row along
2		-+Y; the insulator's underside is on the XY plane, the posts' mating end up, the tails down through the board. Dimensions in the README."""
	1	+"""Through-hole pin header, 2.54 mm and 2.00 mm pitch, one or two rows, straight or right-angle (2.54 mm only). Pin 1 is at the origin, the row along +X.
	2	+Straight: the second row along +Y, the insulator's underside on the XY plane, the mating posts up. Right-angle: the second row's tails along -Y, the
	3	+insulator standing on the XY plane, the mating posts along +Y. The tails go down through the board. Dimensions in the README."""
3	4	from steve import Model
4	5
5	6	pitch = 2.54 # mm Pitch
6	7	rows = 1 # Rows
7	8	pins = 8 # Pins per row
	9	+style = "straight" # straight or right-angle
8	10	detail = "full" # full: square posts and notched insulator; simple: one block per row, with no posts
9	11
10	12	# pitch: (above the insulator C, insulator height, tail B, one-row width, two-row width, post square).
		@@ -12,6 +14,11 @@
12	14	# 2.00: Samtec TMM lead style -02, catalogue page TMM (F-226), A 8.20, B 3.70, C 3.00, body 1.50, widths 1.97 and 3.94. The page doesn't
13	15	# print the post size, so 0.50 here is a proportion of the pitch, for looks.
14	16	SIZES = {2.54: (5.84, 2.54, 2.54, 2.48, 5.02, 0.64), 2.0: (3.00, 1.50, 3.70, 1.97, 3.94, 0.50)}
	17	+
	18	+# Right-angle, 2.54: Samtec TSW lead style -08-RA, same page: post out from the insulator C 5.84, tail below the insulator E 2.29, tail to the insulator D 1.52,
	19	+# insulator height 3.02 (one row) and 5.56 (two rows). The insulator's depth is taken as the straight header's 2.54 high.
	20	+RIGHT_ANGLE = (5.84, 2.29, 1.52, 3.02, 5.56)
	21	+
15	22
16	23	above, body_h, tail, one, two, post = SIZES[pitch]
17	24	width = one if rows == 1 else two
		@@ -28,20 +35,42 @@
28	35	outline += [(x0, y0 + width)]
29	36
30	37	model = Model()
31		-with model.sketch("body_sketch", on="XY", name="Insulator") as sk:
	38	+if style == "right-angle":
	39	+ out, drop, back, high_one, high_two = RIGHT_ANGLE
	40	+ high = high_one if rows == 1 else high_two
	41	+ with model.sketch("body_sketch", on="XY", name="Insulator") as sk:
	42	+ sk.rect("body_outline", (x0, back), (x0 + length, back + body_h))
	43	+ model.extrude("body", "body_sketch", distance=high, name="Insulator")
32	44	if detail == "full":
33		- sk.polyline("body_outline", outline, closed=True)
34		- else:
35		- sk.rect("body_outline", (x0, y0), (x0 + length, y0 + width))
36		-model.extrude("body", "body_sketch", distance=body_h if detail == "full" else body_h + above, name="Insulator")
37		-if detail == "full":
38		- model.plane("tail_plane", on="XY", offset=-tail, name="Tail end")
39		- with model.sketch("posts_sketch", on="tail_plane", name="Posts") as sk:
	45	+ rise = (high - (rows - 1) * pitch) / 2
40	46	for row in range(rows):
41		- for i in range(pins):
42		- x, y = i * pitch, row * pitch
43		- sk.rect(f"post_{row}_{i}", (x - post / 2, y - post / 2), (x + post / 2, y + post / 2))
44		- model.extrude("posts", "posts_sketch", distance=tail + body_h + above, name="Posts")
	47	+ z = rise + row * pitch
	48	+ y_tail = -row * pitch
	49	+ model.plane(f"run_plane_{row}", on="XZ", offset=-y_tail + post / 2, name="Posts")
	50	+ with model.sketch(f"post_sketch_{row}", on=f"run_plane_{row}", name="Posts") as sk:
	51	+ for i in range(pins):
	52	+ sk.rect(f"post_{row}_{i}", (i * pitch - post / 2, z - post / 2), (i * pitch + post / 2, z + post / 2))
	53	+ model.extrude(f"posts_{row}", f"post_sketch_{row}", distance=-(back + body_h + out - y_tail + post / 2), name="Posts")
	54	+ model.plane(f"tail_plane_{row}", on="XY", offset=-drop, name="Tails")
	55	+ with model.sketch(f"tail_sketch_{row}", on=f"tail_plane_{row}", name="Tails") as sk:
	56	+ for i in range(pins):
	57	+ sk.rect(f"tail_{row}_{i}", (i * pitch - post / 2, y_tail - post / 2), (i * pitch + post / 2, y_tail + post / 2))
	58	+ model.extrude(f"tails_{row}", f"tail_sketch_{row}", distance=drop + z + post / 2, name="Tails")
	59	+else:
	60	+ with model.sketch("body_sketch", on="XY", name="Insulator") as sk:
	61	+ if detail == "full":
	62	+ sk.polyline("body_outline", outline, closed=True)
	63	+ else:
	64	+ sk.rect("body_outline", (x0, y0), (x0 + length, y0 + width))
	65	+ model.extrude("body", "body_sketch", distance=body_h if detail == "full" else body_h + above, name="Insulator")
	66	+ if detail == "full":
	67	+ model.plane("tail_plane", on="XY", offset=-tail, name="Tail end")
	68	+ with model.sketch("posts_sketch", on="tail_plane", name="Posts") as sk:
	69	+ for row in range(rows):
	70	+ for i in range(pins):
	71	+ x, y = i * pitch, row * pitch
	72	+ sk.rect(f"post_{row}_{i}", (x - post / 2, y - post / 2), (x + post / 2, y + post / 2))
	73	+ model.extrude("posts", "posts_sketch", distance=tail + body_h + above, name="Posts")
45	74	model.material("steel-generic", color="#2b2b2d")
46	75	result = model.result()
47	76

pypart.toml +11 −3

Copy diff

		@@ -1,9 +1,10 @@
1	1	name = "steve/pin-header"
2		-version = "1.0.0"
	2	+version = "1.1.0"
3	3	runtime = "steve"
4	4	license = "MIT"
5		-summary = "Straight through-hole pin header, 2.54 mm and 2.00 mm pitch, one or two rows, 1 to 40 pins per row."
6		-description = """Straight through-hole pin header with square posts and a notched insulator. Pin 1 at the origin, row along +X. Heights and widths from Samtec's TSW and TMM pages. See the README."""
	5	+summary = "Through-hole pin header, 2.54 mm and 2.00 mm pitch, one or two rows, 1 to 40 pins per row, straight or right-angle."
	6	+changes = "Right-angle 2.54 mm headers."
	7	+description = """Through-hole pin header, straight or right-angle, with square posts and a notched insulator. Pin 1 at the origin, row along +X. Heights and widths from Samtec's TSW and TMM pages. See the README."""
7	8	tags = ["pin-header", "connector", "header", "board-to-board", "electronics"]
8	9
9	10	[parameters.pitch]
		@@ -26,6 +27,13 @@
26	27	max = 40
27	28	label = "Pins per row"
28	29
	30	+[parameters.style]
	31	+type = "choice"
	32	+default = "straight"
	33	+choices = ["straight", "right-angle"]
	34	+label = "Style"
	35	+description = "right-angle is 2.54 mm only."
	36	+
29	37	[parameters.detail]
30	38	type = "choice"
31	39	default = "full"

presets.toml +560 −0

Copy diff

		@@ -1,4 +1,564 @@
1	1	# Presets of this part (factory/PRESETS.md). Written by factory/gen.py.
	2	+
	3	+[[presets]]
	4	+id = "2.54-1x01-RA"
	5	+title = "Pin header 1x01, 2.54 mm, right-angle"
	6	+params = { pitch = 2.54, rows = 1, pins = 1, style = "right-angle" }
	7	+aliases = ["1x01 right angle header", "1x1 right angle header", "1x1 right angle 2.54", "1x01 2.54mm right angle", "1 pin right angle header"]
	8	+standard = "Samtec TSW"
	9	+
	10	+[[presets]]
	11	+id = "2.54-1x02-RA"
	12	+title = "Pin header 1x02, 2.54 mm, right-angle"
	13	+params = { pitch = 2.54, rows = 1, pins = 2, style = "right-angle" }
	14	+aliases = ["1x02 right angle header", "1x2 right angle header", "1x2 right angle 2.54", "1x02 2.54mm right angle", "2 pin right angle header"]
	15	+standard = "Samtec TSW"
	16	+
	17	+[[presets]]
	18	+id = "2.54-1x03-RA"
	19	+title = "Pin header 1x03, 2.54 mm, right-angle"
	20	+params = { pitch = 2.54, rows = 1, pins = 3, style = "right-angle" }
	21	+aliases = ["1x03 right angle header", "1x3 right angle header", "1x3 right angle 2.54", "1x03 2.54mm right angle", "3 pin right angle header"]
	22	+standard = "Samtec TSW"
	23	+
	24	+[[presets]]
	25	+id = "2.54-1x04-RA"
	26	+title = "Pin header 1x04, 2.54 mm, right-angle"
	27	+params = { pitch = 2.54, rows = 1, pins = 4, style = "right-angle" }
	28	+aliases = ["1x04 right angle header", "1x4 right angle header", "1x4 right angle 2.54", "1x04 2.54mm right angle", "4 pin right angle header"]
	29	+standard = "Samtec TSW"
	30	+
	31	+[[presets]]
	32	+id = "2.54-1x05-RA"
	33	+title = "Pin header 1x05, 2.54 mm, right-angle"
	34	+params = { pitch = 2.54, rows = 1, pins = 5, style = "right-angle" }
	35	+aliases = ["1x05 right angle header", "1x5 right angle header", "1x5 right angle 2.54", "1x05 2.54mm right angle", "5 pin right angle header"]
	36	+standard = "Samtec TSW"
	37	+
	38	+[[presets]]
	39	+id = "2.54-1x06-RA"
	40	+title = "Pin header 1x06, 2.54 mm, right-angle"
	41	+params = { pitch = 2.54, rows = 1, pins = 6, style = "right-angle" }
	42	+aliases = ["1x06 right angle header", "1x6 right angle header", "1x6 right angle 2.54", "1x06 2.54mm right angle", "6 pin right angle header"]
	43	+standard = "Samtec TSW"
	44	+
	45	+[[presets]]
	46	+id = "2.54-1x07-RA"
	47	+title = "Pin header 1x07, 2.54 mm, right-angle"
	48	+params = { pitch = 2.54, rows = 1, pins = 7, style = "right-angle" }
	49	+aliases = ["1x07 right angle header", "1x7 right angle header", "1x7 right angle 2.54", "1x07 2.54mm right angle", "7 pin right angle header"]
	50	+standard = "Samtec TSW"
	51	+
	52	+[[presets]]
	53	+id = "2.54-1x08-RA"
	54	+title = "Pin header 1x08, 2.54 mm, right-angle"
	55	+params = { pitch = 2.54, rows = 1, pins = 8, style = "right-angle" }
	56	+aliases = ["1x08 right angle header", "1x8 right angle header", "1x8 right angle 2.54", "1x08 2.54mm right angle", "8 pin right angle header"]
	57	+standard = "Samtec TSW"
	58	+
	59	+[[presets]]
	60	+id = "2.54-1x09-RA"
	61	+title = "Pin header 1x09, 2.54 mm, right-angle"
	62	+params = { pitch = 2.54, rows = 1, pins = 9, style = "right-angle" }
	63	+aliases = ["1x09 right angle header", "1x9 right angle header", "1x9 right angle 2.54", "1x09 2.54mm right angle", "9 pin right angle header"]
	64	+standard = "Samtec TSW"
	65	+
	66	+[[presets]]
	67	+id = "2.54-1x10-RA"
	68	+title = "Pin header 1x10, 2.54 mm, right-angle"
	69	+params = { pitch = 2.54, rows = 1, pins = 10, style = "right-angle" }
	70	+aliases = ["1x10 right angle header", "1x10 right angle 2.54", "1x10 2.54mm right angle", "10 pin right angle header"]
	71	+standard = "Samtec TSW"
	72	+
	73	+[[presets]]
	74	+id = "2.54-1x11-RA"
	75	+title = "Pin header 1x11, 2.54 mm, right-angle"
	76	+params = { pitch = 2.54, rows = 1, pins = 11, style = "right-angle" }
	77	+aliases = ["1x11 right angle header", "1x11 right angle 2.54", "1x11 2.54mm right angle", "11 pin right angle header"]
	78	+standard = "Samtec TSW"
	79	+
	80	+[[presets]]
	81	+id = "2.54-1x12-RA"
	82	+title = "Pin header 1x12, 2.54 mm, right-angle"
	83	+params = { pitch = 2.54, rows = 1, pins = 12, style = "right-angle" }
	84	+aliases = ["1x12 right angle header", "1x12 right angle 2.54", "1x12 2.54mm right angle", "12 pin right angle header"]
	85	+standard = "Samtec TSW"
	86	+
	87	+[[presets]]
	88	+id = "2.54-1x13-RA"
	89	+title = "Pin header 1x13, 2.54 mm, right-angle"
	90	+params = { pitch = 2.54, rows = 1, pins = 13, style = "right-angle" }
	91	+aliases = ["1x13 right angle header", "1x13 right angle 2.54", "1x13 2.54mm right angle", "13 pin right angle header"]
	92	+standard = "Samtec TSW"
	93	+
	94	+[[presets]]
	95	+id = "2.54-1x14-RA"
	96	+title = "Pin header 1x14, 2.54 mm, right-angle"
	97	+params = { pitch = 2.54, rows = 1, pins = 14, style = "right-angle" }
	98	+aliases = ["1x14 right angle header", "1x14 right angle 2.54", "1x14 2.54mm right angle", "14 pin right angle header"]
	99	+standard = "Samtec TSW"
	100	+
	101	+[[presets]]
	102	+id = "2.54-1x15-RA"
	103	+title = "Pin header 1x15, 2.54 mm, right-angle"
	104	+params = { pitch = 2.54, rows = 1, pins = 15, style = "right-angle" }
	105	+aliases = ["1x15 right angle header", "1x15 right angle 2.54", "1x15 2.54mm right angle", "15 pin right angle header"]
	106	+standard = "Samtec TSW"
	107	+
	108	+[[presets]]
	109	+id = "2.54-1x16-RA"
	110	+title = "Pin header 1x16, 2.54 mm, right-angle"
	111	+params = { pitch = 2.54, rows = 1, pins = 16, style = "right-angle" }
	112	+aliases = ["1x16 right angle header", "1x16 right angle 2.54", "1x16 2.54mm right angle", "16 pin right angle header"]
	113	+standard = "Samtec TSW"
	114	+
	115	+[[presets]]
	116	+id = "2.54-1x17-RA"
	117	+title = "Pin header 1x17, 2.54 mm, right-angle"
	118	+params = { pitch = 2.54, rows = 1, pins = 17, style = "right-angle" }
	119	+aliases = ["1x17 right angle header", "1x17 right angle 2.54", "1x17 2.54mm right angle", "17 pin right angle header"]
	120	+standard = "Samtec TSW"
	121	+
	122	+[[presets]]
	123	+id = "2.54-1x18-RA"
	124	+title = "Pin header 1x18, 2.54 mm, right-angle"
	125	+params = { pitch = 2.54, rows = 1, pins = 18, style = "right-angle" }
	126	+aliases = ["1x18 right angle header", "1x18 right angle 2.54", "1x18 2.54mm right angle", "18 pin right angle header"]
	127	+standard = "Samtec TSW"
	128	+
	129	+[[presets]]
	130	+id = "2.54-1x19-RA"
	131	+title = "Pin header 1x19, 2.54 mm, right-angle"
	132	+params = { pitch = 2.54, rows = 1, pins = 19, style = "right-angle" }
	133	+aliases = ["1x19 right angle header", "1x19 right angle 2.54", "1x19 2.54mm right angle", "19 pin right angle header"]
	134	+standard = "Samtec TSW"
	135	+
	136	+[[presets]]
	137	+id = "2.54-1x20-RA"
	138	+title = "Pin header 1x20, 2.54 mm, right-angle"
	139	+params = { pitch = 2.54, rows = 1, pins = 20, style = "right-angle" }
	140	+aliases = ["1x20 right angle header", "1x20 right angle 2.54", "1x20 2.54mm right angle", "20 pin right angle header"]
	141	+standard = "Samtec TSW"
	142	+
	143	+[[presets]]
	144	+id = "2.54-1x21-RA"
	145	+title = "Pin header 1x21, 2.54 mm, right-angle"
	146	+params = { pitch = 2.54, rows = 1, pins = 21, style = "right-angle" }
	147	+aliases = ["1x21 right angle header", "1x21 right angle 2.54", "1x21 2.54mm right angle", "21 pin right angle header"]
	148	+standard = "Samtec TSW"
	149	+
	150	+[[presets]]
	151	+id = "2.54-1x22-RA"
	152	+title = "Pin header 1x22, 2.54 mm, right-angle"
	153	+params = { pitch = 2.54, rows = 1, pins = 22, style = "right-angle" }
	154	+aliases = ["1x22 right angle header", "1x22 right angle 2.54", "1x22 2.54mm right angle", "22 pin right angle header"]
	155	+standard = "Samtec TSW"
	156	+
	157	+[[presets]]
	158	+id = "2.54-1x23-RA"
	159	+title = "Pin header 1x23, 2.54 mm, right-angle"
	160	+params = { pitch = 2.54, rows = 1, pins = 23, style = "right-angle" }
	161	+aliases = ["1x23 right angle header", "1x23 right angle 2.54", "1x23 2.54mm right angle", "23 pin right angle header"]
	162	+standard = "Samtec TSW"
	163	+
	164	+[[presets]]
	165	+id = "2.54-1x24-RA"
	166	+title = "Pin header 1x24, 2.54 mm, right-angle"
	167	+params = { pitch = 2.54, rows = 1, pins = 24, style = "right-angle" }
	168	+aliases = ["1x24 right angle header", "1x24 right angle 2.54", "1x24 2.54mm right angle", "24 pin right angle header"]
	169	+standard = "Samtec TSW"
	170	+
	171	+[[presets]]
	172	+id = "2.54-1x25-RA"
	173	+title = "Pin header 1x25, 2.54 mm, right-angle"
	174	+params = { pitch = 2.54, rows = 1, pins = 25, style = "right-angle" }
	175	+aliases = ["1x25 right angle header", "1x25 right angle 2.54", "1x25 2.54mm right angle", "25 pin right angle header"]
	176	+standard = "Samtec TSW"
	177	+
	178	+[[presets]]
	179	+id = "2.54-1x26-RA"
	180	+title = "Pin header 1x26, 2.54 mm, right-angle"
	181	+params = { pitch = 2.54, rows = 1, pins = 26, style = "right-angle" }
	182	+aliases = ["1x26 right angle header", "1x26 right angle 2.54", "1x26 2.54mm right angle", "26 pin right angle header"]
	183	+standard = "Samtec TSW"
	184	+
	185	+[[presets]]
	186	+id = "2.54-1x27-RA"
	187	+title = "Pin header 1x27, 2.54 mm, right-angle"
	188	+params = { pitch = 2.54, rows = 1, pins = 27, style = "right-angle" }
	189	+aliases = ["1x27 right angle header", "1x27 right angle 2.54", "1x27 2.54mm right angle", "27 pin right angle header"]
	190	+standard = "Samtec TSW"
	191	+
	192	+[[presets]]
	193	+id = "2.54-1x28-RA"
	194	+title = "Pin header 1x28, 2.54 mm, right-angle"
	195	+params = { pitch = 2.54, rows = 1, pins = 28, style = "right-angle" }
	196	+aliases = ["1x28 right angle header", "1x28 right angle 2.54", "1x28 2.54mm right angle", "28 pin right angle header"]
	197	+standard = "Samtec TSW"
	198	+
	199	+[[presets]]
	200	+id = "2.54-1x29-RA"
	201	+title = "Pin header 1x29, 2.54 mm, right-angle"
	202	+params = { pitch = 2.54, rows = 1, pins = 29, style = "right-angle" }
	203	+aliases = ["1x29 right angle header", "1x29 right angle 2.54", "1x29 2.54mm right angle", "29 pin right angle header"]
	204	+standard = "Samtec TSW"
	205	+
	206	+[[presets]]
	207	+id = "2.54-1x30-RA"
	208	+title = "Pin header 1x30, 2.54 mm, right-angle"
	209	+params = { pitch = 2.54, rows = 1, pins = 30, style = "right-angle" }
	210	+aliases = ["1x30 right angle header", "1x30 right angle 2.54", "1x30 2.54mm right angle", "30 pin right angle header"]
	211	+standard = "Samtec TSW"
	212	+
	213	+[[presets]]
	214	+id = "2.54-1x31-RA"
	215	+title = "Pin header 1x31, 2.54 mm, right-angle"
	216	+params = { pitch = 2.54, rows = 1, pins = 31, style = "right-angle" }
	217	+aliases = ["1x31 right angle header", "1x31 right angle 2.54", "1x31 2.54mm right angle", "31 pin right angle header"]
	218	+standard = "Samtec TSW"
	219	+
	220	+[[presets]]
	221	+id = "2.54-1x32-RA"
	222	+title = "Pin header 1x32, 2.54 mm, right-angle"
	223	+params = { pitch = 2.54, rows = 1, pins = 32, style = "right-angle" }
	224	+aliases = ["1x32 right angle header", "1x32 right angle 2.54", "1x32 2.54mm right angle", "32 pin right angle header"]
	225	+standard = "Samtec TSW"
	226	+
	227	+[[presets]]
	228	+id = "2.54-1x33-RA"
	229	+title = "Pin header 1x33, 2.54 mm, right-angle"
	230	+params = { pitch = 2.54, rows = 1, pins = 33, style = "right-angle" }
	231	+aliases = ["1x33 right angle header", "1x33 right angle 2.54", "1x33 2.54mm right angle", "33 pin right angle header"]
	232	+standard = "Samtec TSW"
	233	+
	234	+[[presets]]
	235	+id = "2.54-1x34-RA"
	236	+title = "Pin header 1x34, 2.54 mm, right-angle"
	237	+params = { pitch = 2.54, rows = 1, pins = 34, style = "right-angle" }
	238	+aliases = ["1x34 right angle header", "1x34 right angle 2.54", "1x34 2.54mm right angle", "34 pin right angle header"]
	239	+standard = "Samtec TSW"
	240	+
	241	+[[presets]]
	242	+id = "2.54-1x35-RA"
	243	+title = "Pin header 1x35, 2.54 mm, right-angle"
	244	+params = { pitch = 2.54, rows = 1, pins = 35, style = "right-angle" }
	245	+aliases = ["1x35 right angle header", "1x35 right angle 2.54", "1x35 2.54mm right angle", "35 pin right angle header"]
	246	+standard = "Samtec TSW"
	247	+
	248	+[[presets]]
	249	+id = "2.54-1x36-RA"
	250	+title = "Pin header 1x36, 2.54 mm, right-angle"
	251	+params = { pitch = 2.54, rows = 1, pins = 36, style = "right-angle" }
	252	+aliases = ["1x36 right angle header", "1x36 right angle 2.54", "1x36 2.54mm right angle", "36 pin right angle header"]
	253	+standard = "Samtec TSW"
	254	+
	255	+[[presets]]
	256	+id = "2.54-1x37-RA"
	257	+title = "Pin header 1x37, 2.54 mm, right-angle"
	258	+params = { pitch = 2.54, rows = 1, pins = 37, style = "right-angle" }
	259	+aliases = ["1x37 right angle header", "1x37 right angle 2.54", "1x37 2.54mm right angle", "37 pin right angle header"]
	260	+standard = "Samtec TSW"
	261	+
	262	+[[presets]]
	263	+id = "2.54-1x38-RA"
	264	+title = "Pin header 1x38, 2.54 mm, right-angle"
	265	+params = { pitch = 2.54, rows = 1, pins = 38, style = "right-angle" }
	266	+aliases = ["1x38 right angle header", "1x38 right angle 2.54", "1x38 2.54mm right angle", "38 pin right angle header"]
	267	+standard = "Samtec TSW"
	268	+
	269	+[[presets]]
	270	+id = "2.54-1x39-RA"
	271	+title = "Pin header 1x39, 2.54 mm, right-angle"
	272	+params = { pitch = 2.54, rows = 1, pins = 39, style = "right-angle" }
	273	+aliases = ["1x39 right angle header", "1x39 right angle 2.54", "1x39 2.54mm right angle", "39 pin right angle header"]
	274	+standard = "Samtec TSW"
	275	+
	276	+[[presets]]
	277	+id = "2.54-1x40-RA"
	278	+title = "Pin header 1x40, 2.54 mm, right-angle"
	279	+params = { pitch = 2.54, rows = 1, pins = 40, style = "right-angle" }
	280	+aliases = ["1x40 right angle header", "1x40 right angle 2.54", "1x40 2.54mm right angle", "40 pin right angle header"]
	281	+standard = "Samtec TSW"
	282	+
	283	+[[presets]]
	284	+id = "2.54-2x01-RA"
	285	+title = "Pin header 2x01, 2.54 mm, right-angle"
	286	+params = { pitch = 2.54, rows = 2, pins = 1, style = "right-angle" }
	287	+aliases = ["2x01 right angle header", "2x1 right angle header", "2x1 right angle 2.54", "2x01 2.54mm right angle", "2 pin right angle header"]
	288	+standard = "Samtec TSW"
	289	+
	290	+[[presets]]
	291	+id = "2.54-2x02-RA"
	292	+title = "Pin header 2x02, 2.54 mm, right-angle"
	293	+params = { pitch = 2.54, rows = 2, pins = 2, style = "right-angle" }
	294	+aliases = ["2x02 right angle header", "2x2 right angle header", "2x2 right angle 2.54", "2x02 2.54mm right angle", "4 pin right angle header"]
	295	+standard = "Samtec TSW"
	296	+
	297	+[[presets]]
	298	+id = "2.54-2x03-RA"
	299	+title = "Pin header 2x03, 2.54 mm, right-angle"
	300	+params = { pitch = 2.54, rows = 2, pins = 3, style = "right-angle" }
	301	+aliases = ["2x03 right angle header", "2x3 right angle header", "2x3 right angle 2.54", "2x03 2.54mm right angle", "6 pin right angle header"]
	302	+standard = "Samtec TSW"
	303	+
	304	+[[presets]]
	305	+id = "2.54-2x04-RA"
	306	+title = "Pin header 2x04, 2.54 mm, right-angle"
	307	+params = { pitch = 2.54, rows = 2, pins = 4, style = "right-angle" }
	308	+aliases = ["2x04 right angle header", "2x4 right angle header", "2x4 right angle 2.54", "2x04 2.54mm right angle", "8 pin right angle header"]
	309	+standard = "Samtec TSW"
	310	+
	311	+[[presets]]
	312	+id = "2.54-2x05-RA"
	313	+title = "Pin header 2x05, 2.54 mm, right-angle"
	314	+params = { pitch = 2.54, rows = 2, pins = 5, style = "right-angle" }
	315	+aliases = ["2x05 right angle header", "2x5 right angle header", "2x5 right angle 2.54", "2x05 2.54mm right angle", "10 pin right angle header"]
	316	+standard = "Samtec TSW"
	317	+
	318	+[[presets]]
	319	+id = "2.54-2x06-RA"
	320	+title = "Pin header 2x06, 2.54 mm, right-angle"
	321	+params = { pitch = 2.54, rows = 2, pins = 6, style = "right-angle" }
	322	+aliases = ["2x06 right angle header", "2x6 right angle header", "2x6 right angle 2.54", "2x06 2.54mm right angle", "12 pin right angle header"]
	323	+standard = "Samtec TSW"
	324	+
	325	+[[presets]]
	326	+id = "2.54-2x07-RA"
	327	+title = "Pin header 2x07, 2.54 mm, right-angle"
	328	+params = { pitch = 2.54, rows = 2, pins = 7, style = "right-angle" }
	329	+aliases = ["2x07 right angle header", "2x7 right angle header", "2x7 right angle 2.54", "2x07 2.54mm right angle", "14 pin right angle header"]
	330	+standard = "Samtec TSW"
	331	+
	332	+[[presets]]
	333	+id = "2.54-2x08-RA"
	334	+title = "Pin header 2x08, 2.54 mm, right-angle"
	335	+params = { pitch = 2.54, rows = 2, pins = 8, style = "right-angle" }
	336	+aliases = ["2x08 right angle header", "2x8 right angle header", "2x8 right angle 2.54", "2x08 2.54mm right angle", "16 pin right angle header"]
	337	+standard = "Samtec TSW"
	338	+
	339	+[[presets]]
	340	+id = "2.54-2x09-RA"
	341	+title = "Pin header 2x09, 2.54 mm, right-angle"
	342	+params = { pitch = 2.54, rows = 2, pins = 9, style = "right-angle" }
	343	+aliases = ["2x09 right angle header", "2x9 right angle header", "2x9 right angle 2.54", "2x09 2.54mm right angle", "18 pin right angle header"]
	344	+standard = "Samtec TSW"
	345	+
	346	+[[presets]]
	347	+id = "2.54-2x10-RA"
	348	+title = "Pin header 2x10, 2.54 mm, right-angle"
	349	+params = { pitch = 2.54, rows = 2, pins = 10, style = "right-angle" }
	350	+aliases = ["2x10 right angle header", "2x10 right angle 2.54", "2x10 2.54mm right angle", "20 pin right angle header"]
	351	+standard = "Samtec TSW"
	352	+
	353	+[[presets]]
	354	+id = "2.54-2x11-RA"
	355	+title = "Pin header 2x11, 2.54 mm, right-angle"
	356	+params = { pitch = 2.54, rows = 2, pins = 11, style = "right-angle" }
	357	+aliases = ["2x11 right angle header", "2x11 right angle 2.54", "2x11 2.54mm right angle", "22 pin right angle header"]
	358	+standard = "Samtec TSW"
	359	+
	360	+[[presets]]
	361	+id = "2.54-2x12-RA"
	362	+title = "Pin header 2x12, 2.54 mm, right-angle"
	363	+params = { pitch = 2.54, rows = 2, pins = 12, style = "right-angle" }
	364	+aliases = ["2x12 right angle header", "2x12 right angle 2.54", "2x12 2.54mm right angle", "24 pin right angle header"]
	365	+standard = "Samtec TSW"
	366	+
	367	+[[presets]]
	368	+id = "2.54-2x13-RA"
	369	+title = "Pin header 2x13, 2.54 mm, right-angle"
	370	+params = { pitch = 2.54, rows = 2, pins = 13, style = "right-angle" }
	371	+aliases = ["2x13 right angle header", "2x13 right angle 2.54", "2x13 2.54mm right angle", "26 pin right angle header"]
	372	+standard = "Samtec TSW"
	373	+
	374	+[[presets]]
	375	+id = "2.54-2x14-RA"
	376	+title = "Pin header 2x14, 2.54 mm, right-angle"
	377	+params = { pitch = 2.54, rows = 2, pins = 14, style = "right-angle" }
	378	+aliases = ["2x14 right angle header", "2x14 right angle 2.54", "2x14 2.54mm right angle", "28 pin right angle header"]
	379	+standard = "Samtec TSW"
	380	+
	381	+[[presets]]
	382	+id = "2.54-2x15-RA"
	383	+title = "Pin header 2x15, 2.54 mm, right-angle"
	384	+params = { pitch = 2.54, rows = 2, pins = 15, style = "right-angle" }
	385	+aliases = ["2x15 right angle header", "2x15 right angle 2.54", "2x15 2.54mm right angle", "30 pin right angle header"]
	386	+standard = "Samtec TSW"
	387	+
	388	+[[presets]]
	389	+id = "2.54-2x16-RA"
	390	+title = "Pin header 2x16, 2.54 mm, right-angle"
	391	+params = { pitch = 2.54, rows = 2, pins = 16, style = "right-angle" }
	392	+aliases = ["2x16 right angle header", "2x16 right angle 2.54", "2x16 2.54mm right angle", "32 pin right angle header"]
	393	+standard = "Samtec TSW"
	394	+
	395	+[[presets]]
	396	+id = "2.54-2x17-RA"
	397	+title = "Pin header 2x17, 2.54 mm, right-angle"
	398	+params = { pitch = 2.54, rows = 2, pins = 17, style = "right-angle" }
	399	+aliases = ["2x17 right angle header", "2x17 right angle 2.54", "2x17 2.54mm right angle", "34 pin right angle header"]
	400	+standard = "Samtec TSW"
	401	+
	402	+[[presets]]
	403	+id = "2.54-2x18-RA"
	404	+title = "Pin header 2x18, 2.54 mm, right-angle"
	405	+params = { pitch = 2.54, rows = 2, pins = 18, style = "right-angle" }
	406	+aliases = ["2x18 right angle header", "2x18 right angle 2.54", "2x18 2.54mm right angle", "36 pin right angle header"]
	407	+standard = "Samtec TSW"
	408	+
	409	+[[presets]]
	410	+id = "2.54-2x19-RA"
	411	+title = "Pin header 2x19, 2.54 mm, right-angle"
	412	+params = { pitch = 2.54, rows = 2, pins = 19, style = "right-angle" }
	413	+aliases = ["2x19 right angle header", "2x19 right angle 2.54", "2x19 2.54mm right angle", "38 pin right angle header"]
	414	+standard = "Samtec TSW"
	415	+
	416	+[[presets]]
	417	+id = "2.54-2x20-RA"
	418	+title = "Pin header 2x20, 2.54 mm, right-angle"
	419	+params = { pitch = 2.54, rows = 2, pins = 20, style = "right-angle" }
	420	+aliases = ["2x20 right angle header", "2x20 right angle 2.54", "2x20 2.54mm right angle", "40 pin right angle header"]
	421	+standard = "Samtec TSW"
	422	+
	423	+[[presets]]
	424	+id = "2.54-2x21-RA"
	425	+title = "Pin header 2x21, 2.54 mm, right-angle"
	426	+params = { pitch = 2.54, rows = 2, pins = 21, style = "right-angle" }
	427	+aliases = ["2x21 right angle header", "2x21 right angle 2.54", "2x21 2.54mm right angle", "42 pin right angle header"]
	428	+standard = "Samtec TSW"
	429	+
	430	+[[presets]]
	431	+id = "2.54-2x22-RA"
	432	+title = "Pin header 2x22, 2.54 mm, right-angle"
	433	+params = { pitch = 2.54, rows = 2, pins = 22, style = "right-angle" }
	434	+aliases = ["2x22 right angle header", "2x22 right angle 2.54", "2x22 2.54mm right angle", "44 pin right angle header"]
	435	+standard = "Samtec TSW"
	436	+
	437	+[[presets]]
	438	+id = "2.54-2x23-RA"
	439	+title = "Pin header 2x23, 2.54 mm, right-angle"
	440	+params = { pitch = 2.54, rows = 2, pins = 23, style = "right-angle" }
	441	+aliases = ["2x23 right angle header", "2x23 right angle 2.54", "2x23 2.54mm right angle", "46 pin right angle header"]
	442	+standard = "Samtec TSW"
	443	+
	444	+[[presets]]
	445	+id = "2.54-2x24-RA"
	446	+title = "Pin header 2x24, 2.54 mm, right-angle"
	447	+params = { pitch = 2.54, rows = 2, pins = 24, style = "right-angle" }
	448	+aliases = ["2x24 right angle header", "2x24 right angle 2.54", "2x24 2.54mm right angle", "48 pin right angle header"]
	449	+standard = "Samtec TSW"
	450	+
	451	+[[presets]]
	452	+id = "2.54-2x25-RA"
	453	+title = "Pin header 2x25, 2.54 mm, right-angle"
	454	+params = { pitch = 2.54, rows = 2, pins = 25, style = "right-angle" }
	455	+aliases = ["2x25 right angle header", "2x25 right angle 2.54", "2x25 2.54mm right angle", "50 pin right angle header"]
	456	+standard = "Samtec TSW"
	457	+
	458	+[[presets]]
	459	+id = "2.54-2x26-RA"
	460	+title = "Pin header 2x26, 2.54 mm, right-angle"
	461	+params = { pitch = 2.54, rows = 2, pins = 26, style = "right-angle" }
	462	+aliases = ["2x26 right angle header", "2x26 right angle 2.54", "2x26 2.54mm right angle", "52 pin right angle header"]
	463	+standard = "Samtec TSW"
	464	+
	465	+[[presets]]
	466	+id = "2.54-2x27-RA"
	467	+title = "Pin header 2x27, 2.54 mm, right-angle"
	468	+params = { pitch = 2.54, rows = 2, pins = 27, style = "right-angle" }
	469	+aliases = ["2x27 right angle header", "2x27 right angle 2.54", "2x27 2.54mm right angle", "54 pin right angle header"]
	470	+standard = "Samtec TSW"
	471	+
	472	+[[presets]]
	473	+id = "2.54-2x28-RA"
	474	+title = "Pin header 2x28, 2.54 mm, right-angle"
	475	+params = { pitch = 2.54, rows = 2, pins = 28, style = "right-angle" }
	476	+aliases = ["2x28 right angle header", "2x28 right angle 2.54", "2x28 2.54mm right angle", "56 pin right angle header"]
	477	+standard = "Samtec TSW"
	478	+
	479	+[[presets]]
	480	+id = "2.54-2x29-RA"
	481	+title = "Pin header 2x29, 2.54 mm, right-angle"
	482	+params = { pitch = 2.54, rows = 2, pins = 29, style = "right-angle" }
	483	+aliases = ["2x29 right angle header", "2x29 right angle 2.54", "2x29 2.54mm right angle", "58 pin right angle header"]
	484	+standard = "Samtec TSW"
	485	+
	486	+[[presets]]
	487	+id = "2.54-2x30-RA"
	488	+title = "Pin header 2x30, 2.54 mm, right-angle"
	489	+params = { pitch = 2.54, rows = 2, pins = 30, style = "right-angle" }
	490	+aliases = ["2x30 right angle header", "2x30 right angle 2.54", "2x30 2.54mm right angle", "60 pin right angle header"]
	491	+standard = "Samtec TSW"
	492	+
	493	+[[presets]]
	494	+id = "2.54-2x31-RA"
	495	+title = "Pin header 2x31, 2.54 mm, right-angle"
	496	+params = { pitch = 2.54, rows = 2, pins = 31, style = "right-angle" }
	497	+aliases = ["2x31 right angle header", "2x31 right angle 2.54", "2x31 2.54mm right angle", "62 pin right angle header"]
	498	+standard = "Samtec TSW"
	499	+
	500	+[[presets]]
	501	+id = "2.54-2x32-RA"
	502	+title = "Pin header 2x32, 2.54 mm, right-angle"
	503	+params = { pitch = 2.54, rows = 2, pins = 32, style = "right-angle" }
	504	+aliases = ["2x32 right angle header", "2x32 right angle 2.54", "2x32 2.54mm right angle", "64 pin right angle header"]
	505	+standard = "Samtec TSW"
	506	+
	507	+[[presets]]
	508	+id = "2.54-2x33-RA"
	509	+title = "Pin header 2x33, 2.54 mm, right-angle"
	510	+params = { pitch = 2.54, rows = 2, pins = 33, style = "right-angle" }
	511	+aliases = ["2x33 right angle header", "2x33 right angle 2.54", "2x33 2.54mm right angle", "66 pin right angle header"]
	512	+standard = "Samtec TSW"
	513	+
	514	+[[presets]]
	515	+id = "2.54-2x34-RA"
	516	+title = "Pin header 2x34, 2.54 mm, right-angle"
	517	+params = { pitch = 2.54, rows = 2, pins = 34, style = "right-angle" }
	518	+aliases = ["2x34 right angle header", "2x34 right angle 2.54", "2x34 2.54mm right angle", "68 pin right angle header"]
	519	+standard = "Samtec TSW"
	520	+
	521	+[[presets]]
	522	+id = "2.54-2x35-RA"
	523	+title = "Pin header 2x35, 2.54 mm, right-angle"
	524	+params = { pitch = 2.54, rows = 2, pins = 35, style = "right-angle" }
	525	+aliases = ["2x35 right angle header", "2x35 right angle 2.54", "2x35 2.54mm right angle", "70 pin right angle header"]
	526	+standard = "Samtec TSW"
	527	+
	528	+[[presets]]
	529	+id = "2.54-2x36-RA"
	530	+title = "Pin header 2x36, 2.54 mm, right-angle"
	531	+params = { pitch = 2.54, rows = 2, pins = 36, style = "right-angle" }
	532	+aliases = ["2x36 right angle header", "2x36 right angle 2.54", "2x36 2.54mm right angle", "72 pin right angle header"]
	533	+standard = "Samtec TSW"
	534	+
	535	+[[presets]]
	536	+id = "2.54-2x37-RA"
	537	+title = "Pin header 2x37, 2.54 mm, right-angle"
	538	+params = { pitch = 2.54, rows = 2, pins = 37, style = "right-angle" }
	539	+aliases = ["2x37 right angle header", "2x37 right angle 2.54", "2x37 2.54mm right angle", "74 pin right angle header"]
	540	+standard = "Samtec TSW"
	541	+
	542	+[[presets]]
	543	+id = "2.54-2x38-RA"
	544	+title = "Pin header 2x38, 2.54 mm, right-angle"
	545	+params = { pitch = 2.54, rows = 2, pins = 38, style = "right-angle" }
	546	+aliases = ["2x38 right angle header", "2x38 right angle 2.54", "2x38 2.54mm right angle", "76 pin right angle header"]
	547	+standard = "Samtec TSW"
	548	+
	549	+[[presets]]
	550	+id = "2.54-2x39-RA"
	551	+title = "Pin header 2x39, 2.54 mm, right-angle"
	552	+params = { pitch = 2.54, rows = 2, pins = 39, style = "right-angle" }
	553	+aliases = ["2x39 right angle header", "2x39 right angle 2.54", "2x39 2.54mm right angle", "78 pin right angle header"]
	554	+standard = "Samtec TSW"
	555	+
	556	+[[presets]]
	557	+id = "2.54-2x40-RA"
	558	+title = "Pin header 2x40, 2.54 mm, right-angle"
	559	+params = { pitch = 2.54, rows = 2, pins = 40, style = "right-angle" }
	560	+aliases = ["2x40 right angle header", "2x40 right angle 2.54", "2x40 2.54mm right angle", "80 pin right angle header"]
	561	+standard = "Samtec TSW"
2	562
3	563	[[presets]]
4	564	id = "2.54-1x01"

README.md +6 −3

Copy diff

		@@ -1,15 +1,18 @@
1	1	# Pin header
2	2
3		-A straight through-hole pin header. Pin 1 is at the origin, the row runs along +X and the second row along +Y. The insulator's underside is on the XY plane, the mating posts point up and the tails go down through the board.
	3	+A through-hole pin header, straight or right-angle. Right-angle: the tails and second row go along -Y, the posts along +Y, and the insulator stands on the XY plane.
	4	+
	5	+Straight: Pin 1 is at the origin, the row runs along +X and the second row along +Y. The insulator's underside is on the XY plane, the mating posts point up and the tails go down through the board.
4	6
5	7	## Source
6	8
7	9	- 2.54 mm: Samtec TSW/HTSW catalogue page (F-226), <https://suddendocs.samtec.com/catalog_english/tsw_th.pdf>, lead style -07: post above the insulator C 5.84, tail B 2.54, overall A 10.92, so the insulator is 2.54 high. Width 2.48 (one row), 5.02 (two rows). Post .025 in square, 0.64 mm.
	10	+- 2.54 mm right-angle: the same TSW/HTSW catalogue page, lead style -08-RA: post out from the insulator C 5.84, tail below the insulator E 2.29, tail to the insulator D 1.52, insulator height 3.02 (one row) and 5.56 (two rows).
8	11	- 2.00 mm: Samtec TMM catalogue page (F-226), <https://suddendocs.samtec.com/catalog_english/tmm_th.pdf>, lead style -02: C 3.00, B 3.70, A 8.20, insulator 1.50. Width 1.97 and 3.94.
9	12
10	13	Other headers of the same pitch differ in post and tail length, so check the one you buy.
11	14
12		-**Proportions, for looks only:** the V notches between pins, and the 2.00 mm post size of 0.50 mm, which that page doesn't print.
	15	+**Proportions, for looks only:** the V notches between pins, the 2.00 mm post size of 0.50 mm, which that page doesn't print, and the right-angle insulator's depth, taken as the straight header's 2.54.
13	16
14		-Right-angle, surface-mount, 1.27 mm and 1.00 mm headers aren't here yet; see `COVERAGE.md`.
	17	+2.00 mm right-angle, surface-mount, 1.27 mm and 1.00 mm headers aren't here yet; see `COVERAGE.md`.
15	18