STEVEMIT
steve/miniature-linear-guide
HIWIN MGN miniature linear guideway, sizes 7, 9, 12 and 15: rail (MGNR) or block (MGN-C / MGN-H).
steve/linear-guide
Profile linear guide envelope: HGR15, 20, 25 and MGN rails of any length, HGH and HGW blocks.
Not affiliated with or endorsed by HIWIN.
Isometric
Section analysis
Plane normal
Offset
| 1 | """Profile linear guide, HIWIN sizes: a rail of any length (HGR, MGNR) or a block (HGH CA/HA, HGW CC/HC) as an envelope for |
| 2 | assemblies. The rail: a WR x HR bar along X, centred on the origin, base on the XY plane, with counterbored mounting |
| 3 | holes at pitch P centred along the length. A block: a W x L body from H1 (its underside above the rail's base) to H, the rail's |
| 4 | WR x HR section as the channel through it, and four mounting holes at B (across) x C (along), threads drawn at nominal diameter. |
| 5 | Ball tracks, end seals and lubrication fittings are not modelled.""" |
| 6 | from steve import Model |
| 7 | |
| 8 | size = "HGR20" # Rail size |
| 9 | component = "rail" # Rail or block type |
| 10 | rail_length = 300 # mm Rail length (rail only) |
| 11 | |
| 12 | # rail: (WR, HR, D counterbore, h counterbore depth, d through hole, P pitch, E smallest end distance) |
| 13 | # HGR: HIWIN Linear Guideway Technical Information as in the HIWIN catalogue PDF (mirror https://www.tuli.si/files/HIWIN_celotni_katalog.pdf), |
| 14 | # Table 1.17, p. 20. MGN: HIWIN FORM G99TE24-2410, 2-4-19 (1), printed p. 88. |
| 15 | RAILS = { |
| 16 | "HGR15": (15, 15.0, 7.5, 5.3, 4.5, 60, 6), "HGR20": (20, 17.5, 9.5, 8.5, 6.0, 60, 7), "HGR25": (23, 22.0, 11.0, 9.0, 7.0, 60, 8), |
| 17 | "MGN7": (7, 4.8, 4.2, 2.3, 2.4, 15, 5), "MGN9": (9, 6.5, 6, 3.5, 3.5, 20, 7.5), |
| 18 | "MGN12": (12, 8, 6, 4.5, 3.5, 25, 10), "MGN15": (15, 10, 6, 4.5, 3.5, 40, 15), |
| 19 | } |
| 20 | # (rail, block type): (H, H1, W, B, C, L, thread M, depth l). HGH: Table 1.14, p. 17; HGW: Table 1.16, p. 19; MGN: as above. |
| 21 | BLOCKS = { |
| 22 | ("HGR15", "HGH-CA"): (28, 4.3, 34, 26, 26, 61.4, 4, 5), ("HGR20", "HGH-CA"): (30, 4.6, 44, 32, 36, 77.5, 5, 6), |
| 23 | ("HGR20", "HGH-HA"): (30, 4.6, 44, 32, 50, 92.2, 5, 6), ("HGR25", "HGH-CA"): (40, 5.5, 48, 35, 35, 84.0, 6, 8), |
| 24 | ("HGR25", "HGH-HA"): (40, 5.5, 48, 35, 50, 104.6, 6, 8), ("HGR15", "HGW-CC"): (24, 4.3, 47, 38, 30, 61.4, 5, 6), |
| 25 | ("HGR20", "HGW-CC"): (30, 4.6, 63, 53, 40, 77.5, 6, 8), ("HGR20", "HGW-HC"): (30, 4.6, 63, 53, 40, 92.2, 6, 8), |
| 26 | ("HGR25", "HGW-CC"): (36, 5.5, 70, 57, 45, 84.0, 8, 8), ("HGR25", "HGW-HC"): (36, 5.5, 70, 57, 45, 104.6, 8, 8), |
| 27 | } |
| 28 | |
| 29 | WR, HR, D, h, d, P, E = RAILS[size] |
| 30 | model = Model() |
| 31 | if component == "rail": |
| 32 | if rail_length < 2 * E: |
| 33 | raise ValueError(f"The rail must be at least 2 E = {2 * E} mm long.") |
| 34 | holes = int((rail_length - 2 * E) // P) + 1 |
| 35 | x0 = -(holes - 1) * P / 2 |
| 36 | with model.sketch("rail_sketch", on="XY", name="Rail") as sk: |
| 37 | sk.rect("outline", (-rail_length / 2, -WR / 2), (rail_length / 2, WR / 2)) |
| 38 | model.extrude("rail", "rail_sketch", distance=HR, name="Rail") |
| 39 | with model.sketch("holes_sketch", on="XY", name="Mounting holes") as sk: |
| 40 | for i in range(holes): |
| 41 | sk.circle(f"hole_{i + 1}", (x0 + i * P, 0), d / 2) |
| 42 | model.extrude("holes", "holes_sketch", distance=HR, op="cut", name="Mounting holes") |
| 43 | model.plane("cbore_plane", on="XY", offset=HR - h, name="Counterbore floor") |
| 44 | with model.sketch("cbore_sketch", on="cbore_plane", name="Counterbores") as sk: |
| 45 | for i in range(holes): |
| 46 | sk.circle(f"cbore_{i + 1}", (x0 + i * P, 0), D / 2) |
| 47 | model.extrude("cbores", "cbore_sketch", distance=h, op="cut", name="Counterbores") |
| 48 | else: |
| 49 | if (size, component) not in BLOCKS: |
| 50 | raise ValueError(f"{size}: no block {component} in the source.") |
| 51 | H, H1, W, B, C, L, M, l = BLOCKS[(size, component)] |
| 52 | model.plane("base_plane", on="XY", offset=H1, name="Block underside") |
| 53 | with model.sketch("block_sketch", on="base_plane", name="Block") as sk: |
| 54 | sk.rect("outline", (-L / 2, -W / 2), (L / 2, W / 2)) |
| 55 | model.extrude("block", "block_sketch", distance=H - H1, name="Block") |
| 56 | with model.sketch("channel_sketch", on="base_plane", name="Rail channel") as sk: |
| 57 | sk.rect("channel", (-L / 2, -WR / 2), (L / 2, WR / 2)) |
| 58 | model.extrude("channel", "channel_sketch", distance=HR - H1, op="cut", name="Rail channel") |
| 59 | model.plane("thread_plane", on="XY", offset=H - l, name="Thread bottom") |
| 60 | with model.sketch("thread_sketch", on="thread_plane", name="Mounting threads") as sk: |
| 61 | for i, (x, y) in enumerate([(-C / 2, -B / 2), (C / 2, -B / 2), (C / 2, B / 2), (-C / 2, B / 2)]): |
| 62 | sk.circle(f"thread_{i + 1}", (x, y), M / 2) |
| 63 | model.extrude("threads", "thread_sketch", distance=l, op="cut", name="Mounting threads") |
| 64 | model.material("steel-generic", color="#9da2a8") |
| 65 | result = model.result() |
| 66 |
| 1 | name = "steve/linear-guide" |
| 2 | version = "1.0.0" |
| 3 | runtime = "steve" |
| 4 | license = "MIT" |
| 5 | summary = "Profile linear guide envelope: HGR15, 20, 25 and MGN rails of any length, HGH and HGW blocks." |
| 6 | description = """Profile linear guide in HIWIN's public sizes, as an envelope for assemblies: a rail of any length with its mounting holes, or a \ |
| 7 | block with the rail's channel and four mounting holes. Ball tracks, seals and fittings are not modelled. Length along X, base on the XY plane. \ |
| 8 | See the README; not affiliated with HIWIN.""" |
| 9 | tags = ["linear-guide", "linear-rail", "hgr", "mgn", "hiwin", "motion"] |
| 10 | |
| 11 | [parameters.size] |
| 12 | type = "choice" |
| 13 | default = "HGR20" |
| 14 | choices = ["HGR15", "HGR20", "HGR25", "MGN7", "MGN9", "MGN12", "MGN15"] |
| 15 | label = "Rail size" |
| 16 | |
| 17 | [parameters.component] |
| 18 | type = "choice" |
| 19 | default = "rail" |
| 20 | choices = ["rail", "HGH-CA", "HGH-HA", "HGW-CC", "HGW-HC"] |
| 21 | label = "Rail or block" |
| 22 | |
| 23 | [parameters.rail_length] |
| 24 | type = "number" |
| 25 | default = 300 |
| 26 | min = 10 |
| 27 | max = 4000 |
| 28 | unit = "mm" |
| 29 | label = "Rail length" |
| 30 |
| 1 | # Presets of this part (factory/PRESETS.md). Written by factory/gen.py. |
| 2 | |
| 3 | [[presets]] |
| 4 | id = "HGH15CA" |
| 5 | title = "HGH15CA block" |
| 6 | params = { size = "HGR15", component = "HGH-CA" } |
| 7 | aliases = ["HIWIN HGH15CA", "HGH15CA carriage", "HGH15CA block", "HGR15 HGH block", "HGR15HGH", "carriage style=HGH; rail=HGR15; generic body/mounting hole envelope"] |
| 8 | standard = "HIWIN catalogue" |
| 9 | |
| 10 | [[presets]] |
| 11 | id = "HGW15CC" |
| 12 | title = "HGW15CC block" |
| 13 | params = { size = "HGR15", component = "HGW-CC" } |
| 14 | aliases = ["HIWIN HGW15CC", "HGW15CC carriage", "HGW15CC block", "HGR15 HGW block", "HGR15HGW", "carriage style=HGW; rail=HGR15; generic body/mounting hole envelope"] |
| 15 | standard = "HIWIN catalogue" |
| 16 | |
| 17 | [[presets]] |
| 18 | id = "HGR15-L100" |
| 19 | title = "HGR15 rail, 100 mm" |
| 20 | params = { size = "HGR15", component = "rail", rail_length = 100 } |
| 21 | aliases = ["HGR15 rail 100", "HGR15 linear rail 100", "HGR15 100mm", "HGR15 rail", "HGR15", "rail profile=HGR15; length=100 mm; generic envelope; mounting holes per standard pattern"] |
| 22 | standard = "HIWIN catalogue" |
| 23 | |
| 24 | [[presets]] |
| 25 | id = "HGR15-L150" |
| 26 | title = "HGR15 rail, 150 mm" |
| 27 | params = { size = "HGR15", component = "rail", rail_length = 150 } |
| 28 | aliases = ["HGR15 rail 150", "HGR15 linear rail 150", "HGR15 150mm", "HGR15 rail", "HGR15", "rail profile=HGR15; length=150 mm; generic envelope; mounting holes per standard pattern"] |
| 29 | standard = "HIWIN catalogue" |
| 30 | |
| 31 | [[presets]] |
| 32 | id = "HGR15-L200" |
| 33 | title = "HGR15 rail, 200 mm" |
| 34 | params = { size = "HGR15", component = "rail", rail_length = 200 } |
| 35 | aliases = ["HGR15 rail 200", "HGR15 linear rail 200", "HGR15 200mm", "HGR15 rail", "HGR15", "rail profile=HGR15; length=200 mm; generic envelope; mounting holes per standard pattern"] |
| 36 | standard = "HIWIN catalogue" |
| 37 | |
| 38 | [[presets]] |
| 39 | id = "HGR15-L250" |
| 40 | title = "HGR15 rail, 250 mm" |
| 41 | params = { size = "HGR15", component = "rail", rail_length = 250 } |
| 42 | aliases = ["HGR15 rail 250", "HGR15 linear rail 250", "HGR15 250mm", "HGR15 rail", "HGR15", "rail profile=HGR15; length=250 mm; generic envelope; mounting holes per standard pattern"] |
| 43 | standard = "HIWIN catalogue" |
| 44 | |
| 45 | [[presets]] |
| 46 | id = "HGR15-L300" |
| 47 | title = "HGR15 rail, 300 mm" |
| 48 | params = { size = "HGR15", component = "rail", rail_length = 300 } |
| 49 | aliases = ["HGR15 rail 300", "HGR15 linear rail 300", "HGR15 300mm", "HGR15 rail", "HGR15", "rail profile=HGR15; length=300 mm; generic envelope; mounting holes per standard pattern"] |
| 50 | standard = "HIWIN catalogue" |
| 51 | |
| 52 | [[presets]] |
| 53 | id = "HGR15-L350" |
| 54 | title = "HGR15 rail, 350 mm" |
| 55 | params = { size = "HGR15", component = "rail", rail_length = 350 } |
| 56 | aliases = ["HGR15 rail 350", "HGR15 linear rail 350", "HGR15 350mm", "HGR15 rail", "HGR15", "rail profile=HGR15; length=350 mm; generic envelope; mounting holes per standard pattern"] |
| 57 | standard = "HIWIN catalogue" |
| 58 | |
| 59 | [[presets]] |
| 60 | id = "HGR15-L400" |
| 61 | title = "HGR15 rail, 400 mm" |
| 62 | params = { size = "HGR15", component = "rail", rail_length = 400 } |
| 63 | aliases = ["HGR15 rail 400", "HGR15 linear rail 400", "HGR15 400mm", "HGR15 rail", "HGR15", "rail profile=HGR15; length=400 mm; generic envelope; mounting holes per standard pattern"] |
| 64 | standard = "HIWIN catalogue" |
| 65 | |
| 66 | [[presets]] |
| 67 | id = "HGR15-L450" |
| 68 | title = "HGR15 rail, 450 mm" |
| 69 | params = { size = "HGR15", component = "rail", rail_length = 450 } |
| 70 | aliases = ["HGR15 rail 450", "HGR15 linear rail 450", "HGR15 450mm", "HGR15 rail", "HGR15", "rail profile=HGR15; length=450 mm; generic envelope; mounting holes per standard pattern"] |
| 71 | standard = "HIWIN catalogue" |
| 72 | |
| 73 | [[presets]] |
| 74 | id = "HGR15-L500" |
| 75 | title = "HGR15 rail, 500 mm" |
| 76 | params = { size = "HGR15", component = "rail", rail_length = 500 } |
| 77 | aliases = ["HGR15 rail 500", "HGR15 linear rail 500", "HGR15 500mm", "HGR15 rail", "HGR15", "rail profile=HGR15; length=500 mm; generic envelope; mounting holes per standard pattern"] |
| 78 | standard = "HIWIN catalogue" |
| 79 | |
| 80 | [[presets]] |
| 81 | id = "HGR15-L600" |
| 82 | title = "HGR15 rail, 600 mm" |
| 83 | params = { size = "HGR15", component = "rail", rail_length = 600 } |
| 84 | aliases = ["HGR15 rail 600", "HGR15 linear rail 600", "HGR15 600mm", "HGR15 rail", "HGR15", "rail profile=HGR15; length=600 mm; generic envelope; mounting holes per standard pattern"] |
| 85 | standard = "HIWIN catalogue" |
| 86 | |
| 87 | [[presets]] |
| 88 | id = "HGR15-L750" |
| 89 | title = "HGR15 rail, 750 mm" |
| 90 | params = { size = "HGR15", component = "rail", rail_length = 750 } |
| 91 | aliases = ["HGR15 rail 750", "HGR15 linear rail 750", "HGR15 750mm", "HGR15 rail", "HGR15", "rail profile=HGR15; length=750 mm; generic envelope; mounting holes per standard pattern"] |
| 92 | standard = "HIWIN catalogue" |
| 93 | |
| 94 | [[presets]] |
| 95 | id = "HGR15-L1000" |
| 96 | title = "HGR15 rail, 1000 mm" |
| 97 | params = { size = "HGR15", component = "rail", rail_length = 1000 } |
| 98 | aliases = ["HGR15 rail 1000", "HGR15 linear rail 1000", "HGR15 1000mm", "HGR15 rail", "HGR15", "rail profile=HGR15; length=1000 mm; generic envelope; mounting holes per standard pattern"] |
| 99 | standard = "HIWIN catalogue" |
| 100 | |
| 101 | [[presets]] |
| 102 | id = "HGH20CA" |
| 103 | title = "HGH20CA block" |
| 104 | params = { size = "HGR20", component = "HGH-CA" } |
| 105 | aliases = ["HIWIN HGH20CA", "HGH20CA carriage", "HGH20CA block", "HGR20 HGH block", "HGR20HGH", "carriage style=HGH; rail=HGR20; generic body/mounting hole envelope"] |
| 106 | standard = "HIWIN catalogue" |
| 107 | |
| 108 | [[presets]] |
| 109 | id = "HGW20CC" |
| 110 | title = "HGW20CC block" |
| 111 | params = { size = "HGR20", component = "HGW-CC" } |
| 112 | aliases = ["HIWIN HGW20CC", "HGW20CC carriage", "HGW20CC block", "HGR20 HGW block", "HGR20HGW", "carriage style=HGW; rail=HGR20; generic body/mounting hole envelope"] |
| 113 | standard = "HIWIN catalogue" |
| 114 | |
| 115 | [[presets]] |
| 116 | id = "HGR20-L100" |
| 117 | title = "HGR20 rail, 100 mm" |
| 118 | params = { size = "HGR20", component = "rail", rail_length = 100 } |
| 119 | aliases = ["HGR20 rail 100", "HGR20 linear rail 100", "HGR20 100mm", "HGR20 rail", "HGR20", "rail profile=HGR20; length=100 mm; generic envelope; mounting holes per standard pattern"] |
| 120 | standard = "HIWIN catalogue" |
| 121 | |
| 122 | [[presets]] |
| 123 | id = "HGR20-L150" |
| 124 | title = "HGR20 rail, 150 mm" |
| 125 | params = { size = "HGR20", component = "rail", rail_length = 150 } |
| 126 | aliases = ["HGR20 rail 150", "HGR20 linear rail 150", "HGR20 150mm", "HGR20 rail", "HGR20", "rail profile=HGR20; length=150 mm; generic envelope; mounting holes per standard pattern"] |
| 127 | standard = "HIWIN catalogue" |
| 128 | |
| 129 | [[presets]] |
| 130 | id = "HGR20-L200" |
| 131 | title = "HGR20 rail, 200 mm" |
| 132 | params = { size = "HGR20", component = "rail", rail_length = 200 } |
| 133 | aliases = ["HGR20 rail 200", "HGR20 linear rail 200", "HGR20 200mm", "HGR20 rail", "HGR20", "rail profile=HGR20; length=200 mm; generic envelope; mounting holes per standard pattern"] |
| 134 | standard = "HIWIN catalogue" |
| 135 | |
| 136 | [[presets]] |
| 137 | id = "HGR20-L250" |
| 138 | title = "HGR20 rail, 250 mm" |
| 139 | params = { size = "HGR20", component = "rail", rail_length = 250 } |
| 140 | aliases = ["HGR20 rail 250", "HGR20 linear rail 250", "HGR20 250mm", "HGR20 rail", "HGR20", "rail profile=HGR20; length=250 mm; generic envelope; mounting holes per standard pattern"] |
| 141 | standard = "HIWIN catalogue" |
| 142 | |
| 143 | [[presets]] |
| 144 | id = "HGR20-L300" |
| 145 | title = "HGR20 rail, 300 mm" |
| 146 | params = { size = "HGR20", component = "rail", rail_length = 300 } |
| 147 | aliases = ["HGR20 rail 300", "HGR20 linear rail 300", "HGR20 300mm", "HGR20 rail", "HGR20", "rail profile=HGR20; length=300 mm; generic envelope; mounting holes per standard pattern"] |
| 148 | standard = "HIWIN catalogue" |
| 149 | |
| 150 | [[presets]] |
| 151 | id = "HGR20-L350" |
| 152 | title = "HGR20 rail, 350 mm" |
| 153 | params = { size = "HGR20", component = "rail", rail_length = 350 } |
| 154 | aliases = ["HGR20 rail 350", "HGR20 linear rail 350", "HGR20 350mm", "HGR20 rail", "HGR20", "rail profile=HGR20; length=350 mm; generic envelope; mounting holes per standard pattern"] |
| 155 | standard = "HIWIN catalogue" |
| 156 | |
| 157 | [[presets]] |
| 158 | id = "HGR20-L400" |
| 159 | title = "HGR20 rail, 400 mm" |
| 160 | params = { size = "HGR20", component = "rail", rail_length = 400 } |
| 161 | aliases = ["HGR20 rail 400", "HGR20 linear rail 400", "HGR20 400mm", "HGR20 rail", "HGR20", "rail profile=HGR20; length=400 mm; generic envelope; mounting holes per standard pattern"] |
| 162 | standard = "HIWIN catalogue" |
| 163 | |
| 164 | [[presets]] |
| 165 | id = "HGR20-L450" |
| 166 | title = "HGR20 rail, 450 mm" |
| 167 | params = { size = "HGR20", component = "rail", rail_length = 450 } |
| 168 | aliases = ["HGR20 rail 450", "HGR20 linear rail 450", "HGR20 450mm", "HGR20 rail", "HGR20", "rail profile=HGR20; length=450 mm; generic envelope; mounting holes per standard pattern"] |
| 169 | standard = "HIWIN catalogue" |
| 170 | |
| 171 | [[presets]] |
| 172 | id = "HGR20-L500" |
| 173 | title = "HGR20 rail, 500 mm" |
| 174 | params = { size = "HGR20", component = "rail", rail_length = 500 } |
| 175 | aliases = ["HGR20 rail 500", "HGR20 linear rail 500", "HGR20 500mm", "HGR20 rail", "HGR20", "rail profile=HGR20; length=500 mm; generic envelope; mounting holes per standard pattern"] |
| 176 | standard = "HIWIN catalogue" |
| 177 | |
| 178 | [[presets]] |
| 179 | id = "HGR20-L600" |
| 180 | title = "HGR20 rail, 600 mm" |
| 181 | params = { size = "HGR20", component = "rail", rail_length = 600 } |
| 182 | aliases = ["HGR20 rail 600", "HGR20 linear rail 600", "HGR20 600mm", "HGR20 rail", "HGR20", "rail profile=HGR20; length=600 mm; generic envelope; mounting holes per standard pattern"] |
| 183 | standard = "HIWIN catalogue" |
| 184 | |
| 185 | [[presets]] |
| 186 | id = "HGR20-L750" |
| 187 | title = "HGR20 rail, 750 mm" |
| 188 | params = { size = "HGR20", component = "rail", rail_length = 750 } |
| 189 | aliases = ["HGR20 rail 750", "HGR20 linear rail 750", "HGR20 750mm", "HGR20 rail", "HGR20", "rail profile=HGR20; length=750 mm; generic envelope; mounting holes per standard pattern"] |
| 190 | standard = "HIWIN catalogue" |
| 191 | |
| 192 | [[presets]] |
| 193 | id = "HGR20-L1000" |
| 194 | title = "HGR20 rail, 1000 mm" |
| 195 | params = { size = "HGR20", component = "rail", rail_length = 1000 } |
| 196 | aliases = ["HGR20 rail 1000", "HGR20 linear rail 1000", "HGR20 1000mm", "HGR20 rail", "HGR20", "rail profile=HGR20; length=1000 mm; generic envelope; mounting holes per standard pattern"] |
| 197 | standard = "HIWIN catalogue" |
| 198 | |
| 199 | [[presets]] |
| 200 | id = "HGH25CA" |
| 201 | title = "HGH25CA block" |
| 202 | params = { size = "HGR25", component = "HGH-CA" } |
| 203 | aliases = ["HIWIN HGH25CA", "HGH25CA carriage", "HGH25CA block", "HGR25 HGH block", "HGR25HGH", "carriage style=HGH; rail=HGR25; generic body/mounting hole envelope"] |
| 204 | standard = "HIWIN catalogue" |
| 205 | |
| 206 | [[presets]] |
| 207 | id = "HGW25CC" |
| 208 | title = "HGW25CC block" |
| 209 | params = { size = "HGR25", component = "HGW-CC" } |
| 210 | aliases = ["HIWIN HGW25CC", "HGW25CC carriage", "HGW25CC block", "HGR25 HGW block", "HGR25HGW", "carriage style=HGW; rail=HGR25; generic body/mounting hole envelope"] |
| 211 | standard = "HIWIN catalogue" |
| 212 | |
| 213 | [[presets]] |
| 214 | id = "HGR25-L100" |
| 215 | title = "HGR25 rail, 100 mm" |
| 216 | params = { size = "HGR25", component = "rail", rail_length = 100 } |
| 217 | aliases = ["HGR25 rail 100", "HGR25 linear rail 100", "HGR25 100mm", "HGR25 rail", "HGR25", "rail profile=HGR25; length=100 mm; generic envelope; mounting holes per standard pattern"] |
| 218 | standard = "HIWIN catalogue" |
| 219 | |
| 220 | [[presets]] |
| 221 | id = "HGR25-L150" |
| 222 | title = "HGR25 rail, 150 mm" |
| 223 | params = { size = "HGR25", component = "rail", rail_length = 150 } |
| 224 | aliases = ["HGR25 rail 150", "HGR25 linear rail 150", "HGR25 150mm", "HGR25 rail", "HGR25", "rail profile=HGR25; length=150 mm; generic envelope; mounting holes per standard pattern"] |
| 225 | standard = "HIWIN catalogue" |
| 226 | |
| 227 | [[presets]] |
| 228 | id = "HGR25-L200" |
| 229 | title = "HGR25 rail, 200 mm" |
| 230 | params = { size = "HGR25", component = "rail", rail_length = 200 } |
| 231 | aliases = ["HGR25 rail 200", "HGR25 linear rail 200", "HGR25 200mm", "HGR25 rail", "HGR25", "rail profile=HGR25; length=200 mm; generic envelope; mounting holes per standard pattern"] |
| 232 | standard = "HIWIN catalogue" |
| 233 | |
| 234 | [[presets]] |
| 235 | id = "HGR25-L250" |
| 236 | title = "HGR25 rail, 250 mm" |
| 237 | params = { size = "HGR25", component = "rail", rail_length = 250 } |
| 238 | aliases = ["HGR25 rail 250", "HGR25 linear rail 250", "HGR25 250mm", "HGR25 rail", "HGR25", "rail profile=HGR25; length=250 mm; generic envelope; mounting holes per standard pattern"] |
| 239 | standard = "HIWIN catalogue" |
| 240 | |
| 241 | [[presets]] |
| 242 | id = "HGR25-L300" |
| 243 | title = "HGR25 rail, 300 mm" |
| 244 | params = { size = "HGR25", component = "rail", rail_length = 300 } |
| 245 | aliases = ["HGR25 rail 300", "HGR25 linear rail 300", "HGR25 300mm", "HGR25 rail", "HGR25", "rail profile=HGR25; length=300 mm; generic envelope; mounting holes per standard pattern"] |
| 246 | standard = "HIWIN catalogue" |
| 247 | |
| 248 | [[presets]] |
| 249 | id = "HGR25-L350" |
| 250 | title = "HGR25 rail, 350 mm" |
| 251 | params = { size = "HGR25", component = "rail", rail_length = 350 } |
| 252 | aliases = ["HGR25 rail 350", "HGR25 linear rail 350", "HGR25 350mm", "HGR25 rail", "HGR25", "rail profile=HGR25; length=350 mm; generic envelope; mounting holes per standard pattern"] |
| 253 | standard = "HIWIN catalogue" |
| 254 | |
| 255 | [[presets]] |
| 256 | id = "HGR25-L400" |
| 257 | title = "HGR25 rail, 400 mm" |
| 258 | params = { size = "HGR25", component = "rail", rail_length = 400 } |
| 259 | aliases = ["HGR25 rail 400", "HGR25 linear rail 400", "HGR25 400mm", "HGR25 rail", "HGR25", "rail profile=HGR25; length=400 mm; generic envelope; mounting holes per standard pattern"] |
| 260 | standard = "HIWIN catalogue" |
| 261 | |
| 262 | [[presets]] |
| 263 | id = "HGR25-L450" |
| 264 | title = "HGR25 rail, 450 mm" |
| 265 | params = { size = "HGR25", component = "rail", rail_length = 450 } |
| 266 | aliases = ["HGR25 rail 450", "HGR25 linear rail 450", "HGR25 450mm", "HGR25 rail", "HGR25", "rail profile=HGR25; length=450 mm; generic envelope; mounting holes per standard pattern"] |
| 267 | standard = "HIWIN catalogue" |
| 268 | |
| 269 | [[presets]] |
| 270 | id = "HGR25-L500" |
| 271 | title = "HGR25 rail, 500 mm" |
| 272 | params = { size = "HGR25", component = "rail", rail_length = 500 } |
| 273 | aliases = ["HGR25 rail 500", "HGR25 linear rail 500", "HGR25 500mm", "HGR25 rail", "HGR25", "rail profile=HGR25; length=500 mm; generic envelope; mounting holes per standard pattern"] |
| 274 | standard = "HIWIN catalogue" |
| 275 | |
| 276 | [[presets]] |
| 277 | id = "HGR25-L600" |
| 278 | title = "HGR25 rail, 600 mm" |
| 279 | params = { size = "HGR25", component = "rail", rail_length = 600 } |
| 280 | aliases = ["HGR25 rail 600", "HGR25 linear rail 600", "HGR25 600mm", "HGR25 rail", "HGR25", "rail profile=HGR25; length=600 mm; generic envelope; mounting holes per standard pattern"] |
| 281 | standard = "HIWIN catalogue" |
| 282 | |
| 283 | [[presets]] |
| 284 | id = "HGR25-L750" |
| 285 | title = "HGR25 rail, 750 mm" |
| 286 | params = { size = "HGR25", component = "rail", rail_length = 750 } |
| 287 | aliases = ["HGR25 rail 750", "HGR25 linear rail 750", "HGR25 750mm", "HGR25 rail", "HGR25", "rail profile=HGR25; length=750 mm; generic envelope; mounting holes per standard pattern"] |
| 288 | standard = "HIWIN catalogue" |
| 289 | |
| 290 | [[presets]] |
| 291 | id = "HGR25-L1000" |
| 292 | title = "HGR25 rail, 1000 mm" |
| 293 | params = { size = "HGR25", component = "rail", rail_length = 1000 } |
| 294 | aliases = ["HGR25 rail 1000", "HGR25 linear rail 1000", "HGR25 1000mm", "HGR25 rail", "HGR25", "rail profile=HGR25; length=1000 mm; generic envelope; mounting holes per standard pattern"] |
| 295 | standard = "HIWIN catalogue" |
| 296 | |
| 297 | [[presets]] |
| 298 | id = "MGN12-L100" |
| 299 | title = "MGN12 rail, 100 mm" |
| 300 | params = { size = "MGN12", component = "rail", rail_length = 100 } |
| 301 | aliases = ["MGN12 rail 100", "MGN12 linear rail 100", "MGN12 100mm", "MGN12 rail", "MGN12", "rail profile=MGN12; length=100 mm; generic envelope; mounting holes per standard pattern"] |
| 302 | standard = "HIWIN catalogue" |
| 303 | |
| 304 | [[presets]] |
| 305 | id = "MGN12-L150" |
| 306 | title = "MGN12 rail, 150 mm" |
| 307 | params = { size = "MGN12", component = "rail", rail_length = 150 } |
| 308 | aliases = ["MGN12 rail 150", "MGN12 linear rail 150", "MGN12 150mm", "MGN12 rail", "MGN12", "rail profile=MGN12; length=150 mm; generic envelope; mounting holes per standard pattern"] |
| 309 | standard = "HIWIN catalogue" |
| 310 | |
| 311 | [[presets]] |
| 312 | id = "MGN12-L200" |
| 313 | title = "MGN12 rail, 200 mm" |
| 314 | params = { size = "MGN12", component = "rail", rail_length = 200 } |
| 315 | aliases = ["MGN12 rail 200", "MGN12 linear rail 200", "MGN12 200mm", "MGN12 rail", "MGN12", "rail profile=MGN12; length=200 mm; generic envelope; mounting holes per standard pattern"] |
| 316 | standard = "HIWIN catalogue" |
| 317 | |
| 318 | [[presets]] |
| 319 | id = "MGN12-L250" |
| 320 | title = "MGN12 rail, 250 mm" |
| 321 | params = { size = "MGN12", component = "rail", rail_length = 250 } |
| 322 | aliases = ["MGN12 rail 250", "MGN12 linear rail 250", "MGN12 250mm", "MGN12 rail", "MGN12", "rail profile=MGN12; length=250 mm; generic envelope; mounting holes per standard pattern"] |
| 323 | standard = "HIWIN catalogue" |
| 324 | |
| 325 | [[presets]] |
| 326 | id = "MGN12-L300" |
| 327 | title = "MGN12 rail, 300 mm" |
| 328 | params = { size = "MGN12", component = "rail", rail_length = 300 } |
| 329 | aliases = ["MGN12 rail 300", "MGN12 linear rail 300", "MGN12 300mm", "MGN12 rail", "MGN12", "rail profile=MGN12; length=300 mm; generic envelope; mounting holes per standard pattern"] |
| 330 | standard = "HIWIN catalogue" |
| 331 | |
| 332 | [[presets]] |
| 333 | id = "MGN12-L350" |
| 334 | title = "MGN12 rail, 350 mm" |
| 335 | params = { size = "MGN12", component = "rail", rail_length = 350 } |
| 336 | aliases = ["MGN12 rail 350", "MGN12 linear rail 350", "MGN12 350mm", "MGN12 rail", "MGN12", "rail profile=MGN12; length=350 mm; generic envelope; mounting holes per standard pattern"] |
| 337 | standard = "HIWIN catalogue" |
| 338 | |
| 339 | [[presets]] |
| 340 | id = "MGN12-L400" |
| 341 | title = "MGN12 rail, 400 mm" |
| 342 | params = { size = "MGN12", component = "rail", rail_length = 400 } |
| 343 | aliases = ["MGN12 rail 400", "MGN12 linear rail 400", "MGN12 400mm", "MGN12 rail", "MGN12", "rail profile=MGN12; length=400 mm; generic envelope; mounting holes per standard pattern"] |
| 344 | standard = "HIWIN catalogue" |
| 345 | |
| 346 | [[presets]] |
| 347 | id = "MGN12-L450" |
| 348 | title = "MGN12 rail, 450 mm" |
| 349 | params = { size = "MGN12", component = "rail", rail_length = 450 } |
| 350 | aliases = ["MGN12 rail 450", "MGN12 linear rail 450", "MGN12 450mm", "MGN12 rail", "MGN12", "rail profile=MGN12; length=450 mm; generic envelope; mounting holes per standard pattern"] |
| 351 | standard = "HIWIN catalogue" |
| 352 | |
| 353 | [[presets]] |
| 354 | id = "MGN12-L500" |
| 355 | title = "MGN12 rail, 500 mm" |
| 356 | params = { size = "MGN12", component = "rail", rail_length = 500 } |
| 357 | aliases = ["MGN12 rail 500", "MGN12 linear rail 500", "MGN12 500mm", "MGN12 rail", "MGN12", "rail profile=MGN12; length=500 mm; generic envelope; mounting holes per standard pattern"] |
| 358 | standard = "HIWIN catalogue" |
| 359 | |
| 360 | [[presets]] |
| 361 | id = "MGN12-L600" |
| 362 | title = "MGN12 rail, 600 mm" |
| 363 | params = { size = "MGN12", component = "rail", rail_length = 600 } |
| 364 | aliases = ["MGN12 rail 600", "MGN12 linear rail 600", "MGN12 600mm", "MGN12 rail", "MGN12", "rail profile=MGN12; length=600 mm; generic envelope; mounting holes per standard pattern"] |
| 365 | standard = "HIWIN catalogue" |
| 366 | |
| 367 | [[presets]] |
| 368 | id = "MGN12-L750" |
| 369 | title = "MGN12 rail, 750 mm" |
| 370 | params = { size = "MGN12", component = "rail", rail_length = 750 } |
| 371 | aliases = ["MGN12 rail 750", "MGN12 linear rail 750", "MGN12 750mm", "MGN12 rail", "MGN12", "rail profile=MGN12; length=750 mm; generic envelope; mounting holes per standard pattern"] |
| 372 | standard = "HIWIN catalogue" |
| 373 | |
| 374 | [[presets]] |
| 375 | id = "MGN12-L1000" |
| 376 | title = "MGN12 rail, 1000 mm" |
| 377 | params = { size = "MGN12", component = "rail", rail_length = 1000 } |
| 378 | aliases = ["MGN12 rail 1000", "MGN12 linear rail 1000", "MGN12 1000mm", "MGN12 rail", "MGN12", "rail profile=MGN12; length=1000 mm; generic envelope; mounting holes per standard pattern"] |
| 379 | standard = "HIWIN catalogue" |
| 380 | |
| 381 | [[presets]] |
| 382 | id = "MGN15-L100" |
| 383 | title = "MGN15 rail, 100 mm" |
| 384 | params = { size = "MGN15", component = "rail", rail_length = 100 } |
| 385 | aliases = ["MGN15 rail 100", "MGN15 linear rail 100", "MGN15 100mm", "MGN15 rail", "MGN15", "rail profile=MGN15; length=100 mm; generic envelope; mounting holes per standard pattern"] |
| 386 | standard = "HIWIN catalogue" |
| 387 | |
| 388 | [[presets]] |
| 389 | id = "MGN15-L150" |
| 390 | title = "MGN15 rail, 150 mm" |
| 391 | params = { size = "MGN15", component = "rail", rail_length = 150 } |
| 392 | aliases = ["MGN15 rail 150", "MGN15 linear rail 150", "MGN15 150mm", "MGN15 rail", "MGN15", "rail profile=MGN15; length=150 mm; generic envelope; mounting holes per standard pattern"] |
| 393 | standard = "HIWIN catalogue" |
| 394 | |
| 395 | [[presets]] |
| 396 | id = "MGN15-L200" |
| 397 | title = "MGN15 rail, 200 mm" |
| 398 | params = { size = "MGN15", component = "rail", rail_length = 200 } |
| 399 | aliases = ["MGN15 rail 200", "MGN15 linear rail 200", "MGN15 200mm", "MGN15 rail", "MGN15", "rail profile=MGN15; length=200 mm; generic envelope; mounting holes per standard pattern"] |
| 400 | standard = "HIWIN catalogue" |
| 401 | |
| 402 | [[presets]] |
| 403 | id = "MGN15-L250" |
| 404 | title = "MGN15 rail, 250 mm" |
| 405 | params = { size = "MGN15", component = "rail", rail_length = 250 } |
| 406 | aliases = ["MGN15 rail 250", "MGN15 linear rail 250", "MGN15 250mm", "MGN15 rail", "MGN15", "rail profile=MGN15; length=250 mm; generic envelope; mounting holes per standard pattern"] |
| 407 | standard = "HIWIN catalogue" |
| 408 | |
| 409 | [[presets]] |
| 410 | id = "MGN15-L300" |
| 411 | title = "MGN15 rail, 300 mm" |
| 412 | params = { size = "MGN15", component = "rail", rail_length = 300 } |
| 413 | aliases = ["MGN15 rail 300", "MGN15 linear rail 300", "MGN15 300mm", "MGN15 rail", "MGN15", "rail profile=MGN15; length=300 mm; generic envelope; mounting holes per standard pattern"] |
| 414 | standard = "HIWIN catalogue" |
| 415 | |
| 416 | [[presets]] |
| 417 | id = "MGN15-L350" |
| 418 | title = "MGN15 rail, 350 mm" |
| 419 | params = { size = "MGN15", component = "rail", rail_length = 350 } |
| 420 | aliases = ["MGN15 rail 350", "MGN15 linear rail 350", "MGN15 350mm", "MGN15 rail", "MGN15", "rail profile=MGN15; length=350 mm; generic envelope; mounting holes per standard pattern"] |
| 421 | standard = "HIWIN catalogue" |
| 422 | |
| 423 | [[presets]] |
| 424 | id = "MGN15-L400" |
| 425 | title = "MGN15 rail, 400 mm" |
| 426 | params = { size = "MGN15", component = "rail", rail_length = 400 } |
| 427 | aliases = ["MGN15 rail 400", "MGN15 linear rail 400", "MGN15 400mm", "MGN15 rail", "MGN15", "rail profile=MGN15; length=400 mm; generic envelope; mounting holes per standard pattern"] |
| 428 | standard = "HIWIN catalogue" |
| 429 | |
| 430 | [[presets]] |
| 431 | id = "MGN15-L450" |
| 432 | title = "MGN15 rail, 450 mm" |
| 433 | params = { size = "MGN15", component = "rail", rail_length = 450 } |
| 434 | aliases = ["MGN15 rail 450", "MGN15 linear rail 450", "MGN15 450mm", "MGN15 rail", "MGN15", "rail profile=MGN15; length=450 mm; generic envelope; mounting holes per standard pattern"] |
| 435 | standard = "HIWIN catalogue" |
| 436 | |
| 437 | [[presets]] |
| 438 | id = "MGN15-L500" |
| 439 | title = "MGN15 rail, 500 mm" |
| 440 | params = { size = "MGN15", component = "rail", rail_length = 500 } |
| 441 | aliases = ["MGN15 rail 500", "MGN15 linear rail 500", "MGN15 500mm", "MGN15 rail", "MGN15", "rail profile=MGN15; length=500 mm; generic envelope; mounting holes per standard pattern"] |
| 442 | standard = "HIWIN catalogue" |
| 443 | |
| 444 | [[presets]] |
| 445 | id = "MGN15-L600" |
| 446 | title = "MGN15 rail, 600 mm" |
| 447 | params = { size = "MGN15", component = "rail", rail_length = 600 } |
| 448 | aliases = ["MGN15 rail 600", "MGN15 linear rail 600", "MGN15 600mm", "MGN15 rail", "MGN15", "rail profile=MGN15; length=600 mm; generic envelope; mounting holes per standard pattern"] |
| 449 | standard = "HIWIN catalogue" |
| 450 | |
| 451 | [[presets]] |
| 452 | id = "MGN15-L750" |
| 453 | title = "MGN15 rail, 750 mm" |
| 454 | params = { size = "MGN15", component = "rail", rail_length = 750 } |
| 455 | aliases = ["MGN15 rail 750", "MGN15 linear rail 750", "MGN15 750mm", "MGN15 rail", "MGN15", "rail profile=MGN15; length=750 mm; generic envelope; mounting holes per standard pattern"] |
| 456 | standard = "HIWIN catalogue" |
| 457 | |
| 458 | [[presets]] |
| 459 | id = "MGN15-L1000" |
| 460 | title = "MGN15 rail, 1000 mm" |
| 461 | params = { size = "MGN15", component = "rail", rail_length = 1000 } |
| 462 | aliases = ["MGN15 rail 1000", "MGN15 linear rail 1000", "MGN15 1000mm", "MGN15 rail", "MGN15", "rail profile=MGN15; length=1000 mm; generic envelope; mounting holes per standard pattern"] |
| 463 | standard = "HIWIN catalogue" |
| 464 | |
| 465 | [[presets]] |
| 466 | id = "MGN7-L100" |
| 467 | title = "MGN7 rail, 100 mm" |
| 468 | params = { size = "MGN7", component = "rail", rail_length = 100 } |
| 469 | aliases = ["MGN7 rail 100", "MGN7 linear rail 100", "MGN7 100mm", "MGN7 rail", "MGN7", "rail profile=MGN7; length=100 mm; generic envelope; mounting holes per standard pattern"] |
| 470 | standard = "HIWIN catalogue" |
| 471 | |
| 472 | [[presets]] |
| 473 | id = "MGN7-L150" |
| 474 | title = "MGN7 rail, 150 mm" |
| 475 | params = { size = "MGN7", component = "rail", rail_length = 150 } |
| 476 | aliases = ["MGN7 rail 150", "MGN7 linear rail 150", "MGN7 150mm", "MGN7 rail", "MGN7", "rail profile=MGN7; length=150 mm; generic envelope; mounting holes per standard pattern"] |
| 477 | standard = "HIWIN catalogue" |
| 478 | |
| 479 | [[presets]] |
| 480 | id = "MGN7-L200" |
| 481 | title = "MGN7 rail, 200 mm" |
| 482 | params = { size = "MGN7", component = "rail", rail_length = 200 } |
| 483 | aliases = ["MGN7 rail 200", "MGN7 linear rail 200", "MGN7 200mm", "MGN7 rail", "MGN7", "rail profile=MGN7; length=200 mm; generic envelope; mounting holes per standard pattern"] |
| 484 | standard = "HIWIN catalogue" |
| 485 | |
| 486 | [[presets]] |
| 487 | id = "MGN7-L250" |
| 488 | title = "MGN7 rail, 250 mm" |
| 489 | params = { size = "MGN7", component = "rail", rail_length = 250 } |
| 490 | aliases = ["MGN7 rail 250", "MGN7 linear rail 250", "MGN7 250mm", "MGN7 rail", "MGN7", "rail profile=MGN7; length=250 mm; generic envelope; mounting holes per standard pattern"] |
| 491 | standard = "HIWIN catalogue" |
| 492 | |
| 493 | [[presets]] |
| 494 | id = "MGN7-L300" |
| 495 | title = "MGN7 rail, 300 mm" |
| 496 | params = { size = "MGN7", component = "rail", rail_length = 300 } |
| 497 | aliases = ["MGN7 rail 300", "MGN7 linear rail 300", "MGN7 300mm", "MGN7 rail", "MGN7", "rail profile=MGN7; length=300 mm; generic envelope; mounting holes per standard pattern"] |
| 498 | standard = "HIWIN catalogue" |
| 499 | |
| 500 | [[presets]] |
| 501 | id = "MGN7-L350" |
| 502 | title = "MGN7 rail, 350 mm" |
| 503 | params = { size = "MGN7", component = "rail", rail_length = 350 } |
| 504 | aliases = ["MGN7 rail 350", "MGN7 linear rail 350", "MGN7 350mm", "MGN7 rail", "MGN7", "rail profile=MGN7; length=350 mm; generic envelope; mounting holes per standard pattern"] |
| 505 | standard = "HIWIN catalogue" |
| 506 | |
| 507 | [[presets]] |
| 508 | id = "MGN7-L400" |
| 509 | title = "MGN7 rail, 400 mm" |
| 510 | params = { size = "MGN7", component = "rail", rail_length = 400 } |
| 511 | aliases = ["MGN7 rail 400", "MGN7 linear rail 400", "MGN7 400mm", "MGN7 rail", "MGN7", "rail profile=MGN7; length=400 mm; generic envelope; mounting holes per standard pattern"] |
| 512 | standard = "HIWIN catalogue" |
| 513 | |
| 514 | [[presets]] |
| 515 | id = "MGN7-L450" |
| 516 | title = "MGN7 rail, 450 mm" |
| 517 | params = { size = "MGN7", component = "rail", rail_length = 450 } |
| 518 | aliases = ["MGN7 rail 450", "MGN7 linear rail 450", "MGN7 450mm", "MGN7 rail", "MGN7", "rail profile=MGN7; length=450 mm; generic envelope; mounting holes per standard pattern"] |
| 519 | standard = "HIWIN catalogue" |
| 520 | |
| 521 | [[presets]] |
| 522 | id = "MGN7-L500" |
| 523 | title = "MGN7 rail, 500 mm" |
| 524 | params = { size = "MGN7", component = "rail", rail_length = 500 } |
| 525 | aliases = ["MGN7 rail 500", "MGN7 linear rail 500", "MGN7 500mm", "MGN7 rail", "MGN7", "rail profile=MGN7; length=500 mm; generic envelope; mounting holes per standard pattern"] |
| 526 | standard = "HIWIN catalogue" |
| 527 | |
| 528 | [[presets]] |
| 529 | id = "MGN7-L600" |
| 530 | title = "MGN7 rail, 600 mm" |
| 531 | params = { size = "MGN7", component = "rail", rail_length = 600 } |
| 532 | aliases = ["MGN7 rail 600", "MGN7 linear rail 600", "MGN7 600mm", "MGN7 rail", "MGN7", "rail profile=MGN7; length=600 mm; generic envelope; mounting holes per standard pattern"] |
| 533 | standard = "HIWIN catalogue" |
| 534 | |
| 535 | [[presets]] |
| 536 | id = "MGN7-L750" |
| 537 | title = "MGN7 rail, 750 mm" |
| 538 | params = { size = "MGN7", component = "rail", rail_length = 750 } |
| 539 | aliases = ["MGN7 rail 750", "MGN7 linear rail 750", "MGN7 750mm", "MGN7 rail", "MGN7", "rail profile=MGN7; length=750 mm; generic envelope; mounting holes per standard pattern"] |
| 540 | standard = "HIWIN catalogue" |
| 541 | |
| 542 | [[presets]] |
| 543 | id = "MGN7-L1000" |
| 544 | title = "MGN7 rail, 1000 mm" |
| 545 | params = { size = "MGN7", component = "rail", rail_length = 1000 } |
| 546 | aliases = ["MGN7 rail 1000", "MGN7 linear rail 1000", "MGN7 1000mm", "MGN7 rail", "MGN7", "rail profile=MGN7; length=1000 mm; generic envelope; mounting holes per standard pattern"] |
| 547 | standard = "HIWIN catalogue" |
| 548 | |
| 549 | [[presets]] |
| 550 | id = "MGN9-L100" |
| 551 | title = "MGN9 rail, 100 mm" |
| 552 | params = { size = "MGN9", component = "rail", rail_length = 100 } |
| 553 | aliases = ["MGN9 rail 100", "MGN9 linear rail 100", "MGN9 100mm", "MGN9 rail", "MGN9", "rail profile=MGN9; length=100 mm; generic envelope; mounting holes per standard pattern"] |
| 554 | standard = "HIWIN catalogue" |
| 555 | |
| 556 | [[presets]] |
| 557 | id = "MGN9-L150" |
| 558 | title = "MGN9 rail, 150 mm" |
| 559 | params = { size = "MGN9", component = "rail", rail_length = 150 } |
| 560 | aliases = ["MGN9 rail 150", "MGN9 linear rail 150", "MGN9 150mm", "MGN9 rail", "MGN9", "rail profile=MGN9; length=150 mm; generic envelope; mounting holes per standard pattern"] |
| 561 | standard = "HIWIN catalogue" |
| 562 | |
| 563 | [[presets]] |
| 564 | id = "MGN9-L200" |
| 565 | title = "MGN9 rail, 200 mm" |
| 566 | params = { size = "MGN9", component = "rail", rail_length = 200 } |
| 567 | aliases = ["MGN9 rail 200", "MGN9 linear rail 200", "MGN9 200mm", "MGN9 rail", "MGN9", "rail profile=MGN9; length=200 mm; generic envelope; mounting holes per standard pattern"] |
| 568 | standard = "HIWIN catalogue" |
| 569 | |
| 570 | [[presets]] |
| 571 | id = "MGN9-L250" |
| 572 | title = "MGN9 rail, 250 mm" |
| 573 | params = { size = "MGN9", component = "rail", rail_length = 250 } |
| 574 | aliases = ["MGN9 rail 250", "MGN9 linear rail 250", "MGN9 250mm", "MGN9 rail", "MGN9", "rail profile=MGN9; length=250 mm; generic envelope; mounting holes per standard pattern"] |
| 575 | standard = "HIWIN catalogue" |
| 576 | |
| 577 | [[presets]] |
| 578 | id = "MGN9-L300" |
| 579 | title = "MGN9 rail, 300 mm" |
| 580 | params = { size = "MGN9", component = "rail", rail_length = 300 } |
| 581 | aliases = ["MGN9 rail 300", "MGN9 linear rail 300", "MGN9 300mm", "MGN9 rail", "MGN9", "rail profile=MGN9; length=300 mm; generic envelope; mounting holes per standard pattern"] |
| 582 | standard = "HIWIN catalogue" |
| 583 | |
| 584 | [[presets]] |
| 585 | id = "MGN9-L350" |
| 586 | title = "MGN9 rail, 350 mm" |
| 587 | params = { size = "MGN9", component = "rail", rail_length = 350 } |
| 588 | aliases = ["MGN9 rail 350", "MGN9 linear rail 350", "MGN9 350mm", "MGN9 rail", "MGN9", "rail profile=MGN9; length=350 mm; generic envelope; mounting holes per standard pattern"] |
| 589 | standard = "HIWIN catalogue" |
| 590 | |
| 591 | [[presets]] |
| 592 | id = "MGN9-L400" |
| 593 | title = "MGN9 rail, 400 mm" |
| 594 | params = { size = "MGN9", component = "rail", rail_length = 400 } |
| 595 | aliases = ["MGN9 rail 400", "MGN9 linear rail 400", "MGN9 400mm", "MGN9 rail", "MGN9", "rail profile=MGN9; length=400 mm; generic envelope; mounting holes per standard pattern"] |
| 596 | standard = "HIWIN catalogue" |
| 597 | |
| 598 | [[presets]] |
| 599 | id = "MGN9-L450" |
| 600 | title = "MGN9 rail, 450 mm" |
| 601 | params = { size = "MGN9", component = "rail", rail_length = 450 } |
| 602 | aliases = ["MGN9 rail 450", "MGN9 linear rail 450", "MGN9 450mm", "MGN9 rail", "MGN9", "rail profile=MGN9; length=450 mm; generic envelope; mounting holes per standard pattern"] |
| 603 | standard = "HIWIN catalogue" |
| 604 | |
| 605 | [[presets]] |
| 606 | id = "MGN9-L500" |
| 607 | title = "MGN9 rail, 500 mm" |
| 608 | params = { size = "MGN9", component = "rail", rail_length = 500 } |
| 609 | aliases = ["MGN9 rail 500", "MGN9 linear rail 500", "MGN9 500mm", "MGN9 rail", "MGN9", "rail profile=MGN9; length=500 mm; generic envelope; mounting holes per standard pattern"] |
| 610 | standard = "HIWIN catalogue" |
| 611 | |
| 612 | [[presets]] |
| 613 | id = "MGN9-L600" |
| 614 | title = "MGN9 rail, 600 mm" |
| 615 | params = { size = "MGN9", component = "rail", rail_length = 600 } |
| 616 | aliases = ["MGN9 rail 600", "MGN9 linear rail 600", "MGN9 600mm", "MGN9 rail", "MGN9", "rail profile=MGN9; length=600 mm; generic envelope; mounting holes per standard pattern"] |
| 617 | standard = "HIWIN catalogue" |
| 618 | |
| 619 | [[presets]] |
| 620 | id = "MGN9-L750" |
| 621 | title = "MGN9 rail, 750 mm" |
| 622 | params = { size = "MGN9", component = "rail", rail_length = 750 } |
| 623 | aliases = ["MGN9 rail 750", "MGN9 linear rail 750", "MGN9 750mm", "MGN9 rail", "MGN9", "rail profile=MGN9; length=750 mm; generic envelope; mounting holes per standard pattern"] |
| 624 | standard = "HIWIN catalogue" |
| 625 | |
| 626 | [[presets]] |
| 627 | id = "MGN9-L1000" |
| 628 | title = "MGN9 rail, 1000 mm" |
| 629 | params = { size = "MGN9", component = "rail", rail_length = 1000 } |
| 630 | aliases = ["MGN9 rail 1000", "MGN9 linear rail 1000", "MGN9 1000mm", "MGN9 rail", "MGN9", "rail profile=MGN9; length=1000 mm; generic envelope; mounting holes per standard pattern"] |
| 631 | standard = "HIWIN catalogue" |
| 632 |
Linear guide (HGR, MGN)
A rail of any length, or a block, in HIWIN's public sizes, as an envelope for assemblies. The MGN blocks are in the
miniature-linear-guide part.
Geometry
- Rail: a WR × HR bar along X, centred on the origin, base on the XY plane, with counterbored mounting holes at pitch P centred along the length (at least E from each end).
- Block: a W × L body from H1 above the rail's base up to H, with the rail's section as its channel and four mounting holes at B × C (threads drawn at nominal diameter).
Ball tracks, end seals and lubrication fittings aren't modelled.
Source
- HG rails and blocks: HIWIN Linear Guideways catalogue (the copy at https://www.tuli.si/files/HIWIN_celotni_katalog.pdf), Table 1.14 Dimensions of the block HGH (p. 17), Table 1.16 HGW (p. 19), Table 1.17 Dimensions of the rail HGR_R (p. 20).
- MGN rails: HIWIN Linear Guideway Technical Information, FORM G99TE24-2410, section 2-4-19 (1), printed p. 88.
| Rail | WR | HR | D | h | d | P | E min |
|---|---|---|---|---|---|---|---|
| HGR15 | 15 | 15 | 7.5 | 5.3 | 4.5 | 60 | 6 |
| HGR20 | 20 | 17.5 | 9.5 | 8.5 | 6 | 60 | 7 |
| HGR25 | 23 | 22 | 11 | 9 | 7 | 60 | 8 |
| MGN7 | 7 | 4.8 | 4.2 | 2.3 | 2.4 | 15 | 5 |
| MGN9 | 9 | 6.5 | 6 | 3.5 | 3.5 | 20 | 7.5 |
| MGN12 | 12 | 8 | 6 | 4.5 | 3.5 | 25 | 10 |
| MGN15 | 15 | 10 | 6 | 4.5 | 3.5 | 40 | 15 |
Every block row is in part.py (BLOCKS). The HIWIN name identifies the source; this part isn't made by or affiliated with HIWIN.
Preset lengths: step.parts catalogue metadata (MIT, library/NOTICE.md).
| 1 | # Linear guide (HGR, MGN) |
| 2 | |
| 3 | A rail of any length, or a block, in HIWIN's public sizes, as an envelope for assemblies. The MGN blocks are in the |
| 4 | `miniature-linear-guide` part. |
| 5 | |
| 6 | ## Geometry |
| 7 | |
| 8 | - **Rail:** a WR × HR bar along X, centred on the origin, base on the XY plane, with counterbored mounting holes at pitch P |
| 9 | centred along the length (at least E from each end). |
| 10 | - **Block:** a W × L body from H1 above the rail's base up to H, with the rail's section as its channel and four mounting holes |
| 11 | at B × C (threads drawn at nominal diameter). |
| 12 | |
| 13 | Ball tracks, end seals and lubrication fittings aren't modelled. |
| 14 | |
| 15 | ## Source |
| 16 | |
| 17 | - **HG rails and blocks:** HIWIN *Linear Guideways* catalogue (the copy at <https://www.tuli.si/files/HIWIN_celotni_katalog.pdf>), |
| 18 | Table 1.14 Dimensions of the block HGH (p. 17), Table 1.16 HGW (p. 19), Table 1.17 Dimensions of the rail HGR_R (p. 20). |
| 19 | - **MGN rails:** HIWIN Linear Guideway Technical Information, FORM G99TE24-2410, section 2-4-19 (1), printed p. 88. |
| 20 | |
| 21 | | Rail | WR | HR | D | h | d | P | E min | |
| 22 | |---|---|---|---|---|---|---|---| |
| 23 | | HGR15 | 15 | 15 | 7.5 | 5.3 | 4.5 | 60 | 6 | |
| 24 | | HGR20 | 20 | 17.5 | 9.5 | 8.5 | 6 | 60 | 7 | |
| 25 | | HGR25 | 23 | 22 | 11 | 9 | 7 | 60 | 8 | |
| 26 | | MGN7 | 7 | 4.8 | 4.2 | 2.3 | 2.4 | 15 | 5 | |
| 27 | | MGN9 | 9 | 6.5 | 6 | 3.5 | 3.5 | 20 | 7.5 | |
| 28 | | MGN12 | 12 | 8 | 6 | 4.5 | 3.5 | 25 | 10 | |
| 29 | | MGN15 | 15 | 10 | 6 | 4.5 | 3.5 | 40 | 15 | |
| 30 | |
| 31 | Every block row is in `part.py` (`BLOCKS`). The HIWIN name identifies the source; this part isn't made by or affiliated with HIWIN. |
| 32 | Preset lengths: step.parts catalogue metadata (MIT, `library/NOTICE.md`). |
| 33 |
Profile linear guide in HIWIN's public sizes, as an envelope for assemblies: a rail of any length with its mounting holes, or a block with the rail's channel and four mounting holes. Ball tracks, seals and fittings are not modelled. Length along X, base on the XY plane. See the README; not affiliated with HIWIN.
Linear guide (HGR, MGN)
A rail of any length, or a block, in HIWIN's public sizes, as an envelope for assemblies. The MGN blocks are in the
miniature-linear-guide part.
Geometry
- Rail: a WR × HR bar along X, centred on the origin, base on the XY plane, with counterbored mounting holes at pitch P centred along the length (at least E from each end).
- Block: a W × L body from H1 above the rail's base up to H, with the rail's section as its channel and four mounting holes at B × C (threads drawn at nominal diameter).
Ball tracks, end seals and lubrication fittings aren't modelled.
Source
- HG rails and blocks: HIWIN Linear Guideways catalogue (the copy at https://www.tuli.si/files/HIWIN_celotni_katalog.pdf), Table 1.14 Dimensions of the block HGH (p. 17), Table 1.16 HGW (p. 19), Table 1.17 Dimensions of the rail HGR_R (p. 20).
- MGN rails: HIWIN Linear Guideway Technical Information, FORM G99TE24-2410, section 2-4-19 (1), printed p. 88.
| Rail | WR | HR | D | h | d | P | E min |
|---|---|---|---|---|---|---|---|
| HGR15 | 15 | 15 | 7.5 | 5.3 | 4.5 | 60 | 6 |
| HGR20 | 20 | 17.5 | 9.5 | 8.5 | 6 | 60 | 7 |
| HGR25 | 23 | 22 | 11 | 9 | 7 | 60 | 8 |
| MGN7 | 7 | 4.8 | 4.2 | 2.3 | 2.4 | 15 | 5 |
| MGN9 | 9 | 6.5 | 6 | 3.5 | 3.5 | 20 | 7.5 |
| MGN12 | 12 | 8 | 6 | 4.5 | 3.5 | 25 | 10 |
| MGN15 | 15 | 10 | 6 | 4.5 | 3.5 | 40 | 15 |
Every block row is in part.py (BLOCKS). The HIWIN name identifies the source; this part isn't made by or affiliated with HIWIN.
Preset lengths: step.parts catalogue metadata (MIT, library/NOTICE.md).
-
1.0.0 Latest
Related parts
More #linear-guide
STEVEMIT
steve/precision-shaft
Precision round shaft for linear bearings: any diameter and length, with the common sizes as presets.
STEVEMIT
steve/lead-screw
Trapezoidal lead screw envelope: Tr8, Tr10, Tr12 and Tr16, leads 2 to 8 mm, any length.
STEVEMIT
steve/damper-envelope
Dashpot / gas strut envelope: Ø10 body and Ø5 piston rod as two bodies, any stroke.