# Presets of this part (factory/PRESETS.md). Written by factory/gen.py.

[[presets]]
id = "GT2-16T-B3-W6"
title = "GT2 16 teeth, bore 3, belt 6 mm"
params = { profile = "2GT", teeth = 16, belt_width = 6, bore = 3, hub = false }
aliases = ["GT2 16 tooth", "GT2 16T", "GT2 pulley 16 tooth", "GT2 16T 3mm bore", "2GT 16T", "GT2 16 teeth bore 3", "GT2", "belt profile=GT2; teeth=16; bore=3 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-16T-B4-W6"
title = "GT2 16 teeth, bore 4, belt 6 mm"
params = { profile = "2GT", teeth = 16, belt_width = 6, bore = 4, hub = false }
aliases = ["GT2 16 tooth", "GT2 16T", "GT2 pulley 16 tooth", "GT2 16T 4mm bore", "2GT 16T", "GT2 16 teeth bore 4", "GT2", "belt profile=GT2; teeth=16; bore=4 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-16T-B5-W6"
title = "GT2 16 teeth, bore 5, belt 6 mm"
params = { profile = "2GT", teeth = 16, belt_width = 6, bore = 5, hub = false }
aliases = ["GT2 16 tooth", "GT2 16T", "GT2 pulley 16 tooth", "GT2 16T 5mm bore", "2GT 16T", "GT2 16 teeth bore 5", "GT2", "belt profile=GT2; teeth=16; bore=5 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-16T-B3-W9"
title = "GT2 16 teeth, bore 3, belt 9 mm"
params = { profile = "2GT", teeth = 16, belt_width = 9, bore = 3, hub = false }
aliases = ["GT2 16 tooth", "GT2 16T", "GT2 pulley 16 tooth", "GT2 16T 3mm bore", "2GT 16T", "GT2 16 teeth bore 3", "GT2", "belt profile=GT2; teeth=16; bore=3 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-16T-B4-W9"
title = "GT2 16 teeth, bore 4, belt 9 mm"
params = { profile = "2GT", teeth = 16, belt_width = 9, bore = 4, hub = false }
aliases = ["GT2 16 tooth", "GT2 16T", "GT2 pulley 16 tooth", "GT2 16T 4mm bore", "2GT 16T", "GT2 16 teeth bore 4", "GT2", "belt profile=GT2; teeth=16; bore=4 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-16T-B5-W9"
title = "GT2 16 teeth, bore 5, belt 9 mm"
params = { profile = "2GT", teeth = 16, belt_width = 9, bore = 5, hub = false }
aliases = ["GT2 16 tooth", "GT2 16T", "GT2 pulley 16 tooth", "GT2 16T 5mm bore", "2GT 16T", "GT2 16 teeth bore 5", "GT2", "belt profile=GT2; teeth=16; bore=5 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-20T-B3-W6"
title = "GT2 20 teeth, bore 3, belt 6 mm"
params = { profile = "2GT", teeth = 20, belt_width = 6, bore = 3, hub = false }
aliases = ["GT2 20 tooth", "GT2 20T", "GT2 pulley 20 tooth", "GT2 20T 3mm bore", "2GT 20T", "GT2 20 teeth bore 3", "GT2", "belt profile=GT2; teeth=20; bore=3 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-20T-B4-W6"
title = "GT2 20 teeth, bore 4, belt 6 mm"
params = { profile = "2GT", teeth = 20, belt_width = 6, bore = 4, hub = false }
aliases = ["GT2 20 tooth", "GT2 20T", "GT2 pulley 20 tooth", "GT2 20T 4mm bore", "2GT 20T", "GT2 20 teeth bore 4", "GT2", "belt profile=GT2; teeth=20; bore=4 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-20T-B5-W6"
title = "GT2 20 teeth, bore 5, belt 6 mm"
params = { profile = "2GT", teeth = 20, belt_width = 6, bore = 5, hub = false }
aliases = ["GT2 20 tooth", "GT2 20T", "GT2 pulley 20 tooth", "GT2 20T 5mm bore", "2GT 20T", "GT2 20 teeth bore 5", "GT2", "belt profile=GT2; teeth=20; bore=5 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-20T-B6-W6"
title = "GT2 20 teeth, bore 6, belt 6 mm"
params = { profile = "2GT", teeth = 20, belt_width = 6, bore = 6, hub = false }
aliases = ["GT2 20 tooth", "GT2 20T", "GT2 pulley 20 tooth", "GT2 20T 6mm bore", "2GT 20T", "GT2 20 teeth bore 6", "GT2", "belt profile=GT2; teeth=20; bore=6 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-20T-B6.35-W6"
title = "GT2 20 teeth, bore 6.35, belt 6 mm"
params = { profile = "2GT", teeth = 20, belt_width = 6, bore = 6.35, hub = false }
aliases = ["GT2 20 tooth", "GT2 20T", "GT2 pulley 20 tooth", "GT2 20T 6.35mm bore", "2GT 20T", "GT2 20 teeth bore 6.35", "GT2", "belt profile=GT2; teeth=20; bore=6.35 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-20T-B3-W9"
title = "GT2 20 teeth, bore 3, belt 9 mm"
params = { profile = "2GT", teeth = 20, belt_width = 9, bore = 3, hub = false }
aliases = ["GT2 20 tooth", "GT2 20T", "GT2 pulley 20 tooth", "GT2 20T 3mm bore", "2GT 20T", "GT2 20 teeth bore 3", "GT2", "belt profile=GT2; teeth=20; bore=3 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-20T-B4-W9"
title = "GT2 20 teeth, bore 4, belt 9 mm"
params = { profile = "2GT", teeth = 20, belt_width = 9, bore = 4, hub = false }
aliases = ["GT2 20 tooth", "GT2 20T", "GT2 pulley 20 tooth", "GT2 20T 4mm bore", "2GT 20T", "GT2 20 teeth bore 4", "GT2", "belt profile=GT2; teeth=20; bore=4 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-20T-B5-W9"
title = "GT2 20 teeth, bore 5, belt 9 mm"
params = { profile = "2GT", teeth = 20, belt_width = 9, bore = 5, hub = false }
aliases = ["GT2 20 tooth", "GT2 20T", "GT2 pulley 20 tooth", "GT2 20T 5mm bore", "2GT 20T", "GT2 20 teeth bore 5", "GT2", "belt profile=GT2; teeth=20; bore=5 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-20T-B6-W9"
title = "GT2 20 teeth, bore 6, belt 9 mm"
params = { profile = "2GT", teeth = 20, belt_width = 9, bore = 6, hub = false }
aliases = ["GT2 20 tooth", "GT2 20T", "GT2 pulley 20 tooth", "GT2 20T 6mm bore", "2GT 20T", "GT2 20 teeth bore 6", "GT2", "belt profile=GT2; teeth=20; bore=6 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-20T-B6.35-W9"
title = "GT2 20 teeth, bore 6.35, belt 9 mm"
params = { profile = "2GT", teeth = 20, belt_width = 9, bore = 6.35, hub = false }
aliases = ["GT2 20 tooth", "GT2 20T", "GT2 pulley 20 tooth", "GT2 20T 6.35mm bore", "2GT 20T", "GT2 20 teeth bore 6.35", "GT2", "belt profile=GT2; teeth=20; bore=6.35 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-24T-B3-W6"
title = "GT2 24 teeth, bore 3, belt 6 mm"
params = { profile = "2GT", teeth = 24, belt_width = 6, bore = 3, hub = false }
aliases = ["GT2 24 tooth", "GT2 24T", "GT2 pulley 24 tooth", "GT2 24T 3mm bore", "2GT 24T", "GT2 24 teeth bore 3", "GT2", "belt profile=GT2; teeth=24; bore=3 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-24T-B4-W6"
title = "GT2 24 teeth, bore 4, belt 6 mm"
params = { profile = "2GT", teeth = 24, belt_width = 6, bore = 4, hub = false }
aliases = ["GT2 24 tooth", "GT2 24T", "GT2 pulley 24 tooth", "GT2 24T 4mm bore", "2GT 24T", "GT2 24 teeth bore 4", "GT2", "belt profile=GT2; teeth=24; bore=4 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-24T-B5-W6"
title = "GT2 24 teeth, bore 5, belt 6 mm"
params = { profile = "2GT", teeth = 24, belt_width = 6, bore = 5, hub = false }
aliases = ["GT2 24 tooth", "GT2 24T", "GT2 pulley 24 tooth", "GT2 24T 5mm bore", "2GT 24T", "GT2 24 teeth bore 5", "GT2", "belt profile=GT2; teeth=24; bore=5 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-24T-B6-W6"
title = "GT2 24 teeth, bore 6, belt 6 mm"
params = { profile = "2GT", teeth = 24, belt_width = 6, bore = 6, hub = false }
aliases = ["GT2 24 tooth", "GT2 24T", "GT2 pulley 24 tooth", "GT2 24T 6mm bore", "2GT 24T", "GT2 24 teeth bore 6", "GT2", "belt profile=GT2; teeth=24; bore=6 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-24T-B6.35-W6"
title = "GT2 24 teeth, bore 6.35, belt 6 mm"
params = { profile = "2GT", teeth = 24, belt_width = 6, bore = 6.35, hub = false }
aliases = ["GT2 24 tooth", "GT2 24T", "GT2 pulley 24 tooth", "GT2 24T 6.35mm bore", "2GT 24T", "GT2 24 teeth bore 6.35", "GT2", "belt profile=GT2; teeth=24; bore=6.35 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-24T-B8-W6"
title = "GT2 24 teeth, bore 8, belt 6 mm"
params = { profile = "2GT", teeth = 24, belt_width = 6, bore = 8, hub = false }
aliases = ["GT2 24 tooth", "GT2 24T", "GT2 pulley 24 tooth", "GT2 24T 8mm bore", "2GT 24T", "GT2 24 teeth bore 8", "GT2", "belt profile=GT2; teeth=24; bore=8 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-24T-B10-W6"
title = "GT2 24 teeth, bore 10, belt 6 mm"
params = { profile = "2GT", teeth = 24, belt_width = 6, bore = 10, hub = false }
aliases = ["GT2 24 tooth", "GT2 24T", "GT2 pulley 24 tooth", "GT2 24T 10mm bore", "2GT 24T", "GT2 24 teeth bore 10", "GT2", "belt profile=GT2; teeth=24; bore=10 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-24T-B3-W9"
title = "GT2 24 teeth, bore 3, belt 9 mm"
params = { profile = "2GT", teeth = 24, belt_width = 9, bore = 3, hub = false }
aliases = ["GT2 24 tooth", "GT2 24T", "GT2 pulley 24 tooth", "GT2 24T 3mm bore", "2GT 24T", "GT2 24 teeth bore 3", "GT2", "belt profile=GT2; teeth=24; bore=3 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-24T-B4-W9"
title = "GT2 24 teeth, bore 4, belt 9 mm"
params = { profile = "2GT", teeth = 24, belt_width = 9, bore = 4, hub = false }
aliases = ["GT2 24 tooth", "GT2 24T", "GT2 pulley 24 tooth", "GT2 24T 4mm bore", "2GT 24T", "GT2 24 teeth bore 4", "GT2", "belt profile=GT2; teeth=24; bore=4 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-24T-B5-W9"
title = "GT2 24 teeth, bore 5, belt 9 mm"
params = { profile = "2GT", teeth = 24, belt_width = 9, bore = 5, hub = false }
aliases = ["GT2 24 tooth", "GT2 24T", "GT2 pulley 24 tooth", "GT2 24T 5mm bore", "2GT 24T", "GT2 24 teeth bore 5", "GT2", "belt profile=GT2; teeth=24; bore=5 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-24T-B6-W9"
title = "GT2 24 teeth, bore 6, belt 9 mm"
params = { profile = "2GT", teeth = 24, belt_width = 9, bore = 6, hub = false }
aliases = ["GT2 24 tooth", "GT2 24T", "GT2 pulley 24 tooth", "GT2 24T 6mm bore", "2GT 24T", "GT2 24 teeth bore 6", "GT2", "belt profile=GT2; teeth=24; bore=6 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-24T-B6.35-W9"
title = "GT2 24 teeth, bore 6.35, belt 9 mm"
params = { profile = "2GT", teeth = 24, belt_width = 9, bore = 6.35, hub = false }
aliases = ["GT2 24 tooth", "GT2 24T", "GT2 pulley 24 tooth", "GT2 24T 6.35mm bore", "2GT 24T", "GT2 24 teeth bore 6.35", "GT2", "belt profile=GT2; teeth=24; bore=6.35 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-24T-B8-W9"
title = "GT2 24 teeth, bore 8, belt 9 mm"
params = { profile = "2GT", teeth = 24, belt_width = 9, bore = 8, hub = false }
aliases = ["GT2 24 tooth", "GT2 24T", "GT2 pulley 24 tooth", "GT2 24T 8mm bore", "2GT 24T", "GT2 24 teeth bore 8", "GT2", "belt profile=GT2; teeth=24; bore=8 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-24T-B10-W9"
title = "GT2 24 teeth, bore 10, belt 9 mm"
params = { profile = "2GT", teeth = 24, belt_width = 9, bore = 10, hub = false }
aliases = ["GT2 24 tooth", "GT2 24T", "GT2 pulley 24 tooth", "GT2 24T 10mm bore", "2GT 24T", "GT2 24 teeth bore 10", "GT2", "belt profile=GT2; teeth=24; bore=10 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-30T-B3-W6"
title = "GT2 30 teeth, bore 3, belt 6 mm"
params = { profile = "2GT", teeth = 30, belt_width = 6, bore = 3, hub = false }
aliases = ["GT2 30 tooth", "GT2 30T", "GT2 pulley 30 tooth", "GT2 30T 3mm bore", "2GT 30T", "GT2 30 teeth bore 3", "GT2", "belt profile=GT2; teeth=30; bore=3 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-30T-B4-W6"
title = "GT2 30 teeth, bore 4, belt 6 mm"
params = { profile = "2GT", teeth = 30, belt_width = 6, bore = 4, hub = false }
aliases = ["GT2 30 tooth", "GT2 30T", "GT2 pulley 30 tooth", "GT2 30T 4mm bore", "2GT 30T", "GT2 30 teeth bore 4", "GT2", "belt profile=GT2; teeth=30; bore=4 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-30T-B5-W6"
title = "GT2 30 teeth, bore 5, belt 6 mm"
params = { profile = "2GT", teeth = 30, belt_width = 6, bore = 5, hub = false }
aliases = ["GT2 30 tooth", "GT2 30T", "GT2 pulley 30 tooth", "GT2 30T 5mm bore", "2GT 30T", "GT2 30 teeth bore 5", "GT2", "belt profile=GT2; teeth=30; bore=5 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-30T-B6-W6"
title = "GT2 30 teeth, bore 6, belt 6 mm"
params = { profile = "2GT", teeth = 30, belt_width = 6, bore = 6, hub = false }
aliases = ["GT2 30 tooth", "GT2 30T", "GT2 pulley 30 tooth", "GT2 30T 6mm bore", "2GT 30T", "GT2 30 teeth bore 6", "GT2", "belt profile=GT2; teeth=30; bore=6 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-30T-B6.35-W6"
title = "GT2 30 teeth, bore 6.35, belt 6 mm"
params = { profile = "2GT", teeth = 30, belt_width = 6, bore = 6.35, hub = false }
aliases = ["GT2 30 tooth", "GT2 30T", "GT2 pulley 30 tooth", "GT2 30T 6.35mm bore", "2GT 30T", "GT2 30 teeth bore 6.35", "GT2", "belt profile=GT2; teeth=30; bore=6.35 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-30T-B8-W6"
title = "GT2 30 teeth, bore 8, belt 6 mm"
params = { profile = "2GT", teeth = 30, belt_width = 6, bore = 8, hub = false }
aliases = ["GT2 30 tooth", "GT2 30T", "GT2 pulley 30 tooth", "GT2 30T 8mm bore", "2GT 30T", "GT2 30 teeth bore 8", "GT2", "belt profile=GT2; teeth=30; bore=8 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-30T-B10-W6"
title = "GT2 30 teeth, bore 10, belt 6 mm"
params = { profile = "2GT", teeth = 30, belt_width = 6, bore = 10, hub = false }
aliases = ["GT2 30 tooth", "GT2 30T", "GT2 pulley 30 tooth", "GT2 30T 10mm bore", "2GT 30T", "GT2 30 teeth bore 10", "GT2", "belt profile=GT2; teeth=30; bore=10 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-30T-B3-W9"
title = "GT2 30 teeth, bore 3, belt 9 mm"
params = { profile = "2GT", teeth = 30, belt_width = 9, bore = 3, hub = false }
aliases = ["GT2 30 tooth", "GT2 30T", "GT2 pulley 30 tooth", "GT2 30T 3mm bore", "2GT 30T", "GT2 30 teeth bore 3", "GT2", "belt profile=GT2; teeth=30; bore=3 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-30T-B4-W9"
title = "GT2 30 teeth, bore 4, belt 9 mm"
params = { profile = "2GT", teeth = 30, belt_width = 9, bore = 4, hub = false }
aliases = ["GT2 30 tooth", "GT2 30T", "GT2 pulley 30 tooth", "GT2 30T 4mm bore", "2GT 30T", "GT2 30 teeth bore 4", "GT2", "belt profile=GT2; teeth=30; bore=4 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-30T-B5-W9"
title = "GT2 30 teeth, bore 5, belt 9 mm"
params = { profile = "2GT", teeth = 30, belt_width = 9, bore = 5, hub = false }
aliases = ["GT2 30 tooth", "GT2 30T", "GT2 pulley 30 tooth", "GT2 30T 5mm bore", "2GT 30T", "GT2 30 teeth bore 5", "GT2", "belt profile=GT2; teeth=30; bore=5 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-30T-B6-W9"
title = "GT2 30 teeth, bore 6, belt 9 mm"
params = { profile = "2GT", teeth = 30, belt_width = 9, bore = 6, hub = false }
aliases = ["GT2 30 tooth", "GT2 30T", "GT2 pulley 30 tooth", "GT2 30T 6mm bore", "2GT 30T", "GT2 30 teeth bore 6", "GT2", "belt profile=GT2; teeth=30; bore=6 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-30T-B6.35-W9"
title = "GT2 30 teeth, bore 6.35, belt 9 mm"
params = { profile = "2GT", teeth = 30, belt_width = 9, bore = 6.35, hub = false }
aliases = ["GT2 30 tooth", "GT2 30T", "GT2 pulley 30 tooth", "GT2 30T 6.35mm bore", "2GT 30T", "GT2 30 teeth bore 6.35", "GT2", "belt profile=GT2; teeth=30; bore=6.35 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-30T-B8-W9"
title = "GT2 30 teeth, bore 8, belt 9 mm"
params = { profile = "2GT", teeth = 30, belt_width = 9, bore = 8, hub = false }
aliases = ["GT2 30 tooth", "GT2 30T", "GT2 pulley 30 tooth", "GT2 30T 8mm bore", "2GT 30T", "GT2 30 teeth bore 8", "GT2", "belt profile=GT2; teeth=30; bore=8 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-30T-B10-W9"
title = "GT2 30 teeth, bore 10, belt 9 mm"
params = { profile = "2GT", teeth = 30, belt_width = 9, bore = 10, hub = false }
aliases = ["GT2 30 tooth", "GT2 30T", "GT2 pulley 30 tooth", "GT2 30T 10mm bore", "2GT 30T", "GT2 30 teeth bore 10", "GT2", "belt profile=GT2; teeth=30; bore=10 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-36T-B3-W6"
title = "GT2 36 teeth, bore 3, belt 6 mm"
params = { profile = "2GT", teeth = 36, belt_width = 6, bore = 3, hub = false }
aliases = ["GT2 36 tooth", "GT2 36T", "GT2 pulley 36 tooth", "GT2 36T 3mm bore", "2GT 36T", "GT2 36 teeth bore 3", "GT2", "belt profile=GT2; teeth=36; bore=3 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-36T-B4-W6"
title = "GT2 36 teeth, bore 4, belt 6 mm"
params = { profile = "2GT", teeth = 36, belt_width = 6, bore = 4, hub = false }
aliases = ["GT2 36 tooth", "GT2 36T", "GT2 pulley 36 tooth", "GT2 36T 4mm bore", "2GT 36T", "GT2 36 teeth bore 4", "GT2", "belt profile=GT2; teeth=36; bore=4 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-36T-B5-W6"
title = "GT2 36 teeth, bore 5, belt 6 mm"
params = { profile = "2GT", teeth = 36, belt_width = 6, bore = 5, hub = false }
aliases = ["GT2 36 tooth", "GT2 36T", "GT2 pulley 36 tooth", "GT2 36T 5mm bore", "2GT 36T", "GT2 36 teeth bore 5", "GT2", "belt profile=GT2; teeth=36; bore=5 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-36T-B6-W6"
title = "GT2 36 teeth, bore 6, belt 6 mm"
params = { profile = "2GT", teeth = 36, belt_width = 6, bore = 6, hub = false }
aliases = ["GT2 36 tooth", "GT2 36T", "GT2 pulley 36 tooth", "GT2 36T 6mm bore", "2GT 36T", "GT2 36 teeth bore 6", "GT2", "belt profile=GT2; teeth=36; bore=6 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-36T-B6.35-W6"
title = "GT2 36 teeth, bore 6.35, belt 6 mm"
params = { profile = "2GT", teeth = 36, belt_width = 6, bore = 6.35, hub = false }
aliases = ["GT2 36 tooth", "GT2 36T", "GT2 pulley 36 tooth", "GT2 36T 6.35mm bore", "2GT 36T", "GT2 36 teeth bore 6.35", "GT2", "belt profile=GT2; teeth=36; bore=6.35 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-36T-B8-W6"
title = "GT2 36 teeth, bore 8, belt 6 mm"
params = { profile = "2GT", teeth = 36, belt_width = 6, bore = 8, hub = false }
aliases = ["GT2 36 tooth", "GT2 36T", "GT2 pulley 36 tooth", "GT2 36T 8mm bore", "2GT 36T", "GT2 36 teeth bore 8", "GT2", "belt profile=GT2; teeth=36; bore=8 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-36T-B10-W6"
title = "GT2 36 teeth, bore 10, belt 6 mm"
params = { profile = "2GT", teeth = 36, belt_width = 6, bore = 10, hub = false }
aliases = ["GT2 36 tooth", "GT2 36T", "GT2 pulley 36 tooth", "GT2 36T 10mm bore", "2GT 36T", "GT2 36 teeth bore 10", "GT2", "belt profile=GT2; teeth=36; bore=10 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-36T-B3-W9"
title = "GT2 36 teeth, bore 3, belt 9 mm"
params = { profile = "2GT", teeth = 36, belt_width = 9, bore = 3, hub = false }
aliases = ["GT2 36 tooth", "GT2 36T", "GT2 pulley 36 tooth", "GT2 36T 3mm bore", "2GT 36T", "GT2 36 teeth bore 3", "GT2", "belt profile=GT2; teeth=36; bore=3 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-36T-B4-W9"
title = "GT2 36 teeth, bore 4, belt 9 mm"
params = { profile = "2GT", teeth = 36, belt_width = 9, bore = 4, hub = false }
aliases = ["GT2 36 tooth", "GT2 36T", "GT2 pulley 36 tooth", "GT2 36T 4mm bore", "2GT 36T", "GT2 36 teeth bore 4", "GT2", "belt profile=GT2; teeth=36; bore=4 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-36T-B5-W9"
title = "GT2 36 teeth, bore 5, belt 9 mm"
params = { profile = "2GT", teeth = 36, belt_width = 9, bore = 5, hub = false }
aliases = ["GT2 36 tooth", "GT2 36T", "GT2 pulley 36 tooth", "GT2 36T 5mm bore", "2GT 36T", "GT2 36 teeth bore 5", "GT2", "belt profile=GT2; teeth=36; bore=5 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-36T-B6-W9"
title = "GT2 36 teeth, bore 6, belt 9 mm"
params = { profile = "2GT", teeth = 36, belt_width = 9, bore = 6, hub = false }
aliases = ["GT2 36 tooth", "GT2 36T", "GT2 pulley 36 tooth", "GT2 36T 6mm bore", "2GT 36T", "GT2 36 teeth bore 6", "GT2", "belt profile=GT2; teeth=36; bore=6 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-36T-B6.35-W9"
title = "GT2 36 teeth, bore 6.35, belt 9 mm"
params = { profile = "2GT", teeth = 36, belt_width = 9, bore = 6.35, hub = false }
aliases = ["GT2 36 tooth", "GT2 36T", "GT2 pulley 36 tooth", "GT2 36T 6.35mm bore", "2GT 36T", "GT2 36 teeth bore 6.35", "GT2", "belt profile=GT2; teeth=36; bore=6.35 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-36T-B8-W9"
title = "GT2 36 teeth, bore 8, belt 9 mm"
params = { profile = "2GT", teeth = 36, belt_width = 9, bore = 8, hub = false }
aliases = ["GT2 36 tooth", "GT2 36T", "GT2 pulley 36 tooth", "GT2 36T 8mm bore", "2GT 36T", "GT2 36 teeth bore 8", "GT2", "belt profile=GT2; teeth=36; bore=8 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-36T-B10-W9"
title = "GT2 36 teeth, bore 10, belt 9 mm"
params = { profile = "2GT", teeth = 36, belt_width = 9, bore = 10, hub = false }
aliases = ["GT2 36 tooth", "GT2 36T", "GT2 pulley 36 tooth", "GT2 36T 10mm bore", "2GT 36T", "GT2 36 teeth bore 10", "GT2", "belt profile=GT2; teeth=36; bore=10 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-40T-B3-W6"
title = "GT2 40 teeth, bore 3, belt 6 mm"
params = { profile = "2GT", teeth = 40, belt_width = 6, bore = 3, hub = false }
aliases = ["GT2 40 tooth", "GT2 40T", "GT2 pulley 40 tooth", "GT2 40T 3mm bore", "2GT 40T", "GT2 40 teeth bore 3", "GT2", "belt profile=GT2; teeth=40; bore=3 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-40T-B4-W6"
title = "GT2 40 teeth, bore 4, belt 6 mm"
params = { profile = "2GT", teeth = 40, belt_width = 6, bore = 4, hub = false }
aliases = ["GT2 40 tooth", "GT2 40T", "GT2 pulley 40 tooth", "GT2 40T 4mm bore", "2GT 40T", "GT2 40 teeth bore 4", "GT2", "belt profile=GT2; teeth=40; bore=4 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-40T-B5-W6"
title = "GT2 40 teeth, bore 5, belt 6 mm"
params = { profile = "2GT", teeth = 40, belt_width = 6, bore = 5, hub = false }
aliases = ["GT2 40 tooth", "GT2 40T", "GT2 pulley 40 tooth", "GT2 40T 5mm bore", "2GT 40T", "GT2 40 teeth bore 5", "GT2", "belt profile=GT2; teeth=40; bore=5 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-40T-B6-W6"
title = "GT2 40 teeth, bore 6, belt 6 mm"
params = { profile = "2GT", teeth = 40, belt_width = 6, bore = 6, hub = false }
aliases = ["GT2 40 tooth", "GT2 40T", "GT2 pulley 40 tooth", "GT2 40T 6mm bore", "2GT 40T", "GT2 40 teeth bore 6", "GT2", "belt profile=GT2; teeth=40; bore=6 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-40T-B6.35-W6"
title = "GT2 40 teeth, bore 6.35, belt 6 mm"
params = { profile = "2GT", teeth = 40, belt_width = 6, bore = 6.35, hub = false }
aliases = ["GT2 40 tooth", "GT2 40T", "GT2 pulley 40 tooth", "GT2 40T 6.35mm bore", "2GT 40T", "GT2 40 teeth bore 6.35", "GT2", "belt profile=GT2; teeth=40; bore=6.35 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-40T-B8-W6"
title = "GT2 40 teeth, bore 8, belt 6 mm"
params = { profile = "2GT", teeth = 40, belt_width = 6, bore = 8, hub = false }
aliases = ["GT2 40 tooth", "GT2 40T", "GT2 pulley 40 tooth", "GT2 40T 8mm bore", "2GT 40T", "GT2 40 teeth bore 8", "GT2", "belt profile=GT2; teeth=40; bore=8 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-40T-B10-W6"
title = "GT2 40 teeth, bore 10, belt 6 mm"
params = { profile = "2GT", teeth = 40, belt_width = 6, bore = 10, hub = false }
aliases = ["GT2 40 tooth", "GT2 40T", "GT2 pulley 40 tooth", "GT2 40T 10mm bore", "2GT 40T", "GT2 40 teeth bore 10", "GT2", "belt profile=GT2; teeth=40; bore=10 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-40T-B3-W9"
title = "GT2 40 teeth, bore 3, belt 9 mm"
params = { profile = "2GT", teeth = 40, belt_width = 9, bore = 3, hub = false }
aliases = ["GT2 40 tooth", "GT2 40T", "GT2 pulley 40 tooth", "GT2 40T 3mm bore", "2GT 40T", "GT2 40 teeth bore 3", "GT2", "belt profile=GT2; teeth=40; bore=3 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-40T-B4-W9"
title = "GT2 40 teeth, bore 4, belt 9 mm"
params = { profile = "2GT", teeth = 40, belt_width = 9, bore = 4, hub = false }
aliases = ["GT2 40 tooth", "GT2 40T", "GT2 pulley 40 tooth", "GT2 40T 4mm bore", "2GT 40T", "GT2 40 teeth bore 4", "GT2", "belt profile=GT2; teeth=40; bore=4 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-40T-B5-W9"
title = "GT2 40 teeth, bore 5, belt 9 mm"
params = { profile = "2GT", teeth = 40, belt_width = 9, bore = 5, hub = false }
aliases = ["GT2 40 tooth", "GT2 40T", "GT2 pulley 40 tooth", "GT2 40T 5mm bore", "2GT 40T", "GT2 40 teeth bore 5", "GT2", "belt profile=GT2; teeth=40; bore=5 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-40T-B6-W9"
title = "GT2 40 teeth, bore 6, belt 9 mm"
params = { profile = "2GT", teeth = 40, belt_width = 9, bore = 6, hub = false }
aliases = ["GT2 40 tooth", "GT2 40T", "GT2 pulley 40 tooth", "GT2 40T 6mm bore", "2GT 40T", "GT2 40 teeth bore 6", "GT2", "belt profile=GT2; teeth=40; bore=6 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-40T-B6.35-W9"
title = "GT2 40 teeth, bore 6.35, belt 9 mm"
params = { profile = "2GT", teeth = 40, belt_width = 9, bore = 6.35, hub = false }
aliases = ["GT2 40 tooth", "GT2 40T", "GT2 pulley 40 tooth", "GT2 40T 6.35mm bore", "2GT 40T", "GT2 40 teeth bore 6.35", "GT2", "belt profile=GT2; teeth=40; bore=6.35 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-40T-B8-W9"
title = "GT2 40 teeth, bore 8, belt 9 mm"
params = { profile = "2GT", teeth = 40, belt_width = 9, bore = 8, hub = false }
aliases = ["GT2 40 tooth", "GT2 40T", "GT2 pulley 40 tooth", "GT2 40T 8mm bore", "2GT 40T", "GT2 40 teeth bore 8", "GT2", "belt profile=GT2; teeth=40; bore=8 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-40T-B10-W9"
title = "GT2 40 teeth, bore 10, belt 9 mm"
params = { profile = "2GT", teeth = 40, belt_width = 9, bore = 10, hub = false }
aliases = ["GT2 40 tooth", "GT2 40T", "GT2 pulley 40 tooth", "GT2 40T 10mm bore", "2GT 40T", "GT2 40 teeth bore 10", "GT2", "belt profile=GT2; teeth=40; bore=10 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-48T-B3-W6"
title = "GT2 48 teeth, bore 3, belt 6 mm"
params = { profile = "2GT", teeth = 48, belt_width = 6, bore = 3, hub = false }
aliases = ["GT2 48 tooth", "GT2 48T", "GT2 pulley 48 tooth", "GT2 48T 3mm bore", "2GT 48T", "GT2 48 teeth bore 3", "GT2", "belt profile=GT2; teeth=48; bore=3 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-48T-B4-W6"
title = "GT2 48 teeth, bore 4, belt 6 mm"
params = { profile = "2GT", teeth = 48, belt_width = 6, bore = 4, hub = false }
aliases = ["GT2 48 tooth", "GT2 48T", "GT2 pulley 48 tooth", "GT2 48T 4mm bore", "2GT 48T", "GT2 48 teeth bore 4", "GT2", "belt profile=GT2; teeth=48; bore=4 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-48T-B5-W6"
title = "GT2 48 teeth, bore 5, belt 6 mm"
params = { profile = "2GT", teeth = 48, belt_width = 6, bore = 5, hub = false }
aliases = ["GT2 48 tooth", "GT2 48T", "GT2 pulley 48 tooth", "GT2 48T 5mm bore", "2GT 48T", "GT2 48 teeth bore 5", "GT2", "belt profile=GT2; teeth=48; bore=5 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-48T-B6-W6"
title = "GT2 48 teeth, bore 6, belt 6 mm"
params = { profile = "2GT", teeth = 48, belt_width = 6, bore = 6, hub = false }
aliases = ["GT2 48 tooth", "GT2 48T", "GT2 pulley 48 tooth", "GT2 48T 6mm bore", "2GT 48T", "GT2 48 teeth bore 6", "GT2", "belt profile=GT2; teeth=48; bore=6 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-48T-B6.35-W6"
title = "GT2 48 teeth, bore 6.35, belt 6 mm"
params = { profile = "2GT", teeth = 48, belt_width = 6, bore = 6.35, hub = false }
aliases = ["GT2 48 tooth", "GT2 48T", "GT2 pulley 48 tooth", "GT2 48T 6.35mm bore", "2GT 48T", "GT2 48 teeth bore 6.35", "GT2", "belt profile=GT2; teeth=48; bore=6.35 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-48T-B8-W6"
title = "GT2 48 teeth, bore 8, belt 6 mm"
params = { profile = "2GT", teeth = 48, belt_width = 6, bore = 8, hub = false }
aliases = ["GT2 48 tooth", "GT2 48T", "GT2 pulley 48 tooth", "GT2 48T 8mm bore", "2GT 48T", "GT2 48 teeth bore 8", "GT2", "belt profile=GT2; teeth=48; bore=8 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-48T-B10-W6"
title = "GT2 48 teeth, bore 10, belt 6 mm"
params = { profile = "2GT", teeth = 48, belt_width = 6, bore = 10, hub = false }
aliases = ["GT2 48 tooth", "GT2 48T", "GT2 pulley 48 tooth", "GT2 48T 10mm bore", "2GT 48T", "GT2 48 teeth bore 10", "GT2", "belt profile=GT2; teeth=48; bore=10 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-48T-B3-W9"
title = "GT2 48 teeth, bore 3, belt 9 mm"
params = { profile = "2GT", teeth = 48, belt_width = 9, bore = 3, hub = false }
aliases = ["GT2 48 tooth", "GT2 48T", "GT2 pulley 48 tooth", "GT2 48T 3mm bore", "2GT 48T", "GT2 48 teeth bore 3", "GT2", "belt profile=GT2; teeth=48; bore=3 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-48T-B4-W9"
title = "GT2 48 teeth, bore 4, belt 9 mm"
params = { profile = "2GT", teeth = 48, belt_width = 9, bore = 4, hub = false }
aliases = ["GT2 48 tooth", "GT2 48T", "GT2 pulley 48 tooth", "GT2 48T 4mm bore", "2GT 48T", "GT2 48 teeth bore 4", "GT2", "belt profile=GT2; teeth=48; bore=4 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-48T-B5-W9"
title = "GT2 48 teeth, bore 5, belt 9 mm"
params = { profile = "2GT", teeth = 48, belt_width = 9, bore = 5, hub = false }
aliases = ["GT2 48 tooth", "GT2 48T", "GT2 pulley 48 tooth", "GT2 48T 5mm bore", "2GT 48T", "GT2 48 teeth bore 5", "GT2", "belt profile=GT2; teeth=48; bore=5 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-48T-B6-W9"
title = "GT2 48 teeth, bore 6, belt 9 mm"
params = { profile = "2GT", teeth = 48, belt_width = 9, bore = 6, hub = false }
aliases = ["GT2 48 tooth", "GT2 48T", "GT2 pulley 48 tooth", "GT2 48T 6mm bore", "2GT 48T", "GT2 48 teeth bore 6", "GT2", "belt profile=GT2; teeth=48; bore=6 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-48T-B6.35-W9"
title = "GT2 48 teeth, bore 6.35, belt 9 mm"
params = { profile = "2GT", teeth = 48, belt_width = 9, bore = 6.35, hub = false }
aliases = ["GT2 48 tooth", "GT2 48T", "GT2 pulley 48 tooth", "GT2 48T 6.35mm bore", "2GT 48T", "GT2 48 teeth bore 6.35", "GT2", "belt profile=GT2; teeth=48; bore=6.35 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-48T-B8-W9"
title = "GT2 48 teeth, bore 8, belt 9 mm"
params = { profile = "2GT", teeth = 48, belt_width = 9, bore = 8, hub = false }
aliases = ["GT2 48 tooth", "GT2 48T", "GT2 pulley 48 tooth", "GT2 48T 8mm bore", "2GT 48T", "GT2 48 teeth bore 8", "GT2", "belt profile=GT2; teeth=48; bore=8 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-48T-B10-W9"
title = "GT2 48 teeth, bore 10, belt 9 mm"
params = { profile = "2GT", teeth = 48, belt_width = 9, bore = 10, hub = false }
aliases = ["GT2 48 tooth", "GT2 48T", "GT2 pulley 48 tooth", "GT2 48T 10mm bore", "2GT 48T", "GT2 48 teeth bore 10", "GT2", "belt profile=GT2; teeth=48; bore=10 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-60T-B3-W6"
title = "GT2 60 teeth, bore 3, belt 6 mm"
params = { profile = "2GT", teeth = 60, belt_width = 6, bore = 3, hub = false }
aliases = ["GT2 60 tooth", "GT2 60T", "GT2 pulley 60 tooth", "GT2 60T 3mm bore", "2GT 60T", "GT2 60 teeth bore 3", "GT2", "belt profile=GT2; teeth=60; bore=3 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-60T-B4-W6"
title = "GT2 60 teeth, bore 4, belt 6 mm"
params = { profile = "2GT", teeth = 60, belt_width = 6, bore = 4, hub = false }
aliases = ["GT2 60 tooth", "GT2 60T", "GT2 pulley 60 tooth", "GT2 60T 4mm bore", "2GT 60T", "GT2 60 teeth bore 4", "GT2", "belt profile=GT2; teeth=60; bore=4 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-60T-B5-W6"
title = "GT2 60 teeth, bore 5, belt 6 mm"
params = { profile = "2GT", teeth = 60, belt_width = 6, bore = 5, hub = false }
aliases = ["GT2 60 tooth", "GT2 60T", "GT2 pulley 60 tooth", "GT2 60T 5mm bore", "2GT 60T", "GT2 60 teeth bore 5", "GT2", "belt profile=GT2; teeth=60; bore=5 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-60T-B6-W6"
title = "GT2 60 teeth, bore 6, belt 6 mm"
params = { profile = "2GT", teeth = 60, belt_width = 6, bore = 6, hub = false }
aliases = ["GT2 60 tooth", "GT2 60T", "GT2 pulley 60 tooth", "GT2 60T 6mm bore", "2GT 60T", "GT2 60 teeth bore 6", "GT2", "belt profile=GT2; teeth=60; bore=6 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-60T-B6.35-W6"
title = "GT2 60 teeth, bore 6.35, belt 6 mm"
params = { profile = "2GT", teeth = 60, belt_width = 6, bore = 6.35, hub = false }
aliases = ["GT2 60 tooth", "GT2 60T", "GT2 pulley 60 tooth", "GT2 60T 6.35mm bore", "2GT 60T", "GT2 60 teeth bore 6.35", "GT2", "belt profile=GT2; teeth=60; bore=6.35 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-60T-B8-W6"
title = "GT2 60 teeth, bore 8, belt 6 mm"
params = { profile = "2GT", teeth = 60, belt_width = 6, bore = 8, hub = false }
aliases = ["GT2 60 tooth", "GT2 60T", "GT2 pulley 60 tooth", "GT2 60T 8mm bore", "2GT 60T", "GT2 60 teeth bore 8", "GT2", "belt profile=GT2; teeth=60; bore=8 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-60T-B10-W6"
title = "GT2 60 teeth, bore 10, belt 6 mm"
params = { profile = "2GT", teeth = 60, belt_width = 6, bore = 10, hub = false }
aliases = ["GT2 60 tooth", "GT2 60T", "GT2 pulley 60 tooth", "GT2 60T 10mm bore", "2GT 60T", "GT2 60 teeth bore 10", "GT2", "belt profile=GT2; teeth=60; bore=10 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-60T-B3-W9"
title = "GT2 60 teeth, bore 3, belt 9 mm"
params = { profile = "2GT", teeth = 60, belt_width = 9, bore = 3, hub = false }
aliases = ["GT2 60 tooth", "GT2 60T", "GT2 pulley 60 tooth", "GT2 60T 3mm bore", "2GT 60T", "GT2 60 teeth bore 3", "GT2", "belt profile=GT2; teeth=60; bore=3 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-60T-B4-W9"
title = "GT2 60 teeth, bore 4, belt 9 mm"
params = { profile = "2GT", teeth = 60, belt_width = 9, bore = 4, hub = false }
aliases = ["GT2 60 tooth", "GT2 60T", "GT2 pulley 60 tooth", "GT2 60T 4mm bore", "2GT 60T", "GT2 60 teeth bore 4", "GT2", "belt profile=GT2; teeth=60; bore=4 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-60T-B5-W9"
title = "GT2 60 teeth, bore 5, belt 9 mm"
params = { profile = "2GT", teeth = 60, belt_width = 9, bore = 5, hub = false }
aliases = ["GT2 60 tooth", "GT2 60T", "GT2 pulley 60 tooth", "GT2 60T 5mm bore", "2GT 60T", "GT2 60 teeth bore 5", "GT2", "belt profile=GT2; teeth=60; bore=5 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-60T-B6-W9"
title = "GT2 60 teeth, bore 6, belt 9 mm"
params = { profile = "2GT", teeth = 60, belt_width = 9, bore = 6, hub = false }
aliases = ["GT2 60 tooth", "GT2 60T", "GT2 pulley 60 tooth", "GT2 60T 6mm bore", "2GT 60T", "GT2 60 teeth bore 6", "GT2", "belt profile=GT2; teeth=60; bore=6 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-60T-B6.35-W9"
title = "GT2 60 teeth, bore 6.35, belt 9 mm"
params = { profile = "2GT", teeth = 60, belt_width = 9, bore = 6.35, hub = false }
aliases = ["GT2 60 tooth", "GT2 60T", "GT2 pulley 60 tooth", "GT2 60T 6.35mm bore", "2GT 60T", "GT2 60 teeth bore 6.35", "GT2", "belt profile=GT2; teeth=60; bore=6.35 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-60T-B8-W9"
title = "GT2 60 teeth, bore 8, belt 9 mm"
params = { profile = "2GT", teeth = 60, belt_width = 9, bore = 8, hub = false }
aliases = ["GT2 60 tooth", "GT2 60T", "GT2 pulley 60 tooth", "GT2 60T 8mm bore", "2GT 60T", "GT2 60 teeth bore 8", "GT2", "belt profile=GT2; teeth=60; bore=8 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT2-60T-B10-W9"
title = "GT2 60 teeth, bore 10, belt 9 mm"
params = { profile = "2GT", teeth = 60, belt_width = 9, bore = 10, hub = false }
aliases = ["GT2 60 tooth", "GT2 60T", "GT2 pulley 60 tooth", "GT2 60T 10mm bore", "2GT 60T", "GT2 60 teeth bore 10", "GT2", "belt profile=GT2; teeth=60; bore=10 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-16T-B3-W6"
title = "GT3 16 teeth, bore 3, belt 6 mm"
params = { profile = "3GT", teeth = 16, belt_width = 6, bore = 3, hub = false }
aliases = ["GT3 16 tooth", "GT3 16T", "GT3 pulley 16 tooth", "GT3 16T 3mm bore", "3GT 16T", "GT3 16 teeth bore 3", "GT3", "belt profile=GT3; teeth=16; bore=3 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-16T-B4-W6"
title = "GT3 16 teeth, bore 4, belt 6 mm"
params = { profile = "3GT", teeth = 16, belt_width = 6, bore = 4, hub = false }
aliases = ["GT3 16 tooth", "GT3 16T", "GT3 pulley 16 tooth", "GT3 16T 4mm bore", "3GT 16T", "GT3 16 teeth bore 4", "GT3", "belt profile=GT3; teeth=16; bore=4 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-16T-B5-W6"
title = "GT3 16 teeth, bore 5, belt 6 mm"
params = { profile = "3GT", teeth = 16, belt_width = 6, bore = 5, hub = false }
aliases = ["GT3 16 tooth", "GT3 16T", "GT3 pulley 16 tooth", "GT3 16T 5mm bore", "3GT 16T", "GT3 16 teeth bore 5", "GT3", "belt profile=GT3; teeth=16; bore=5 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-16T-B6-W6"
title = "GT3 16 teeth, bore 6, belt 6 mm"
params = { profile = "3GT", teeth = 16, belt_width = 6, bore = 6, hub = false }
aliases = ["GT3 16 tooth", "GT3 16T", "GT3 pulley 16 tooth", "GT3 16T 6mm bore", "3GT 16T", "GT3 16 teeth bore 6", "GT3", "belt profile=GT3; teeth=16; bore=6 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-16T-B6.35-W6"
title = "GT3 16 teeth, bore 6.35, belt 6 mm"
params = { profile = "3GT", teeth = 16, belt_width = 6, bore = 6.35, hub = false }
aliases = ["GT3 16 tooth", "GT3 16T", "GT3 pulley 16 tooth", "GT3 16T 6.35mm bore", "3GT 16T", "GT3 16 teeth bore 6.35", "GT3", "belt profile=GT3; teeth=16; bore=6.35 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-16T-B8-W6"
title = "GT3 16 teeth, bore 8, belt 6 mm"
params = { profile = "3GT", teeth = 16, belt_width = 6, bore = 8, hub = false }
aliases = ["GT3 16 tooth", "GT3 16T", "GT3 pulley 16 tooth", "GT3 16T 8mm bore", "3GT 16T", "GT3 16 teeth bore 8", "GT3", "belt profile=GT3; teeth=16; bore=8 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-16T-B3-W9"
title = "GT3 16 teeth, bore 3, belt 9 mm"
params = { profile = "3GT", teeth = 16, belt_width = 9, bore = 3, hub = false }
aliases = ["GT3 16 tooth", "GT3 16T", "GT3 pulley 16 tooth", "GT3 16T 3mm bore", "3GT 16T", "GT3 16 teeth bore 3", "GT3", "belt profile=GT3; teeth=16; bore=3 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-16T-B4-W9"
title = "GT3 16 teeth, bore 4, belt 9 mm"
params = { profile = "3GT", teeth = 16, belt_width = 9, bore = 4, hub = false }
aliases = ["GT3 16 tooth", "GT3 16T", "GT3 pulley 16 tooth", "GT3 16T 4mm bore", "3GT 16T", "GT3 16 teeth bore 4", "GT3", "belt profile=GT3; teeth=16; bore=4 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-16T-B5-W9"
title = "GT3 16 teeth, bore 5, belt 9 mm"
params = { profile = "3GT", teeth = 16, belt_width = 9, bore = 5, hub = false }
aliases = ["GT3 16 tooth", "GT3 16T", "GT3 pulley 16 tooth", "GT3 16T 5mm bore", "3GT 16T", "GT3 16 teeth bore 5", "GT3", "belt profile=GT3; teeth=16; bore=5 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-16T-B6-W9"
title = "GT3 16 teeth, bore 6, belt 9 mm"
params = { profile = "3GT", teeth = 16, belt_width = 9, bore = 6, hub = false }
aliases = ["GT3 16 tooth", "GT3 16T", "GT3 pulley 16 tooth", "GT3 16T 6mm bore", "3GT 16T", "GT3 16 teeth bore 6", "GT3", "belt profile=GT3; teeth=16; bore=6 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-16T-B6.35-W9"
title = "GT3 16 teeth, bore 6.35, belt 9 mm"
params = { profile = "3GT", teeth = 16, belt_width = 9, bore = 6.35, hub = false }
aliases = ["GT3 16 tooth", "GT3 16T", "GT3 pulley 16 tooth", "GT3 16T 6.35mm bore", "3GT 16T", "GT3 16 teeth bore 6.35", "GT3", "belt profile=GT3; teeth=16; bore=6.35 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-16T-B8-W9"
title = "GT3 16 teeth, bore 8, belt 9 mm"
params = { profile = "3GT", teeth = 16, belt_width = 9, bore = 8, hub = false }
aliases = ["GT3 16 tooth", "GT3 16T", "GT3 pulley 16 tooth", "GT3 16T 8mm bore", "3GT 16T", "GT3 16 teeth bore 8", "GT3", "belt profile=GT3; teeth=16; bore=8 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-20T-B3-W6"
title = "GT3 20 teeth, bore 3, belt 6 mm"
params = { profile = "3GT", teeth = 20, belt_width = 6, bore = 3, hub = false }
aliases = ["GT3 20 tooth", "GT3 20T", "GT3 pulley 20 tooth", "GT3 20T 3mm bore", "3GT 20T", "GT3 20 teeth bore 3", "GT3", "belt profile=GT3; teeth=20; bore=3 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-20T-B4-W6"
title = "GT3 20 teeth, bore 4, belt 6 mm"
params = { profile = "3GT", teeth = 20, belt_width = 6, bore = 4, hub = false }
aliases = ["GT3 20 tooth", "GT3 20T", "GT3 pulley 20 tooth", "GT3 20T 4mm bore", "3GT 20T", "GT3 20 teeth bore 4", "GT3", "belt profile=GT3; teeth=20; bore=4 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-20T-B5-W6"
title = "GT3 20 teeth, bore 5, belt 6 mm"
params = { profile = "3GT", teeth = 20, belt_width = 6, bore = 5, hub = false }
aliases = ["GT3 20 tooth", "GT3 20T", "GT3 pulley 20 tooth", "GT3 20T 5mm bore", "3GT 20T", "GT3 20 teeth bore 5", "GT3", "belt profile=GT3; teeth=20; bore=5 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-20T-B6-W6"
title = "GT3 20 teeth, bore 6, belt 6 mm"
params = { profile = "3GT", teeth = 20, belt_width = 6, bore = 6, hub = false }
aliases = ["GT3 20 tooth", "GT3 20T", "GT3 pulley 20 tooth", "GT3 20T 6mm bore", "3GT 20T", "GT3 20 teeth bore 6", "GT3", "belt profile=GT3; teeth=20; bore=6 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-20T-B6.35-W6"
title = "GT3 20 teeth, bore 6.35, belt 6 mm"
params = { profile = "3GT", teeth = 20, belt_width = 6, bore = 6.35, hub = false }
aliases = ["GT3 20 tooth", "GT3 20T", "GT3 pulley 20 tooth", "GT3 20T 6.35mm bore", "3GT 20T", "GT3 20 teeth bore 6.35", "GT3", "belt profile=GT3; teeth=20; bore=6.35 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-20T-B8-W6"
title = "GT3 20 teeth, bore 8, belt 6 mm"
params = { profile = "3GT", teeth = 20, belt_width = 6, bore = 8, hub = false }
aliases = ["GT3 20 tooth", "GT3 20T", "GT3 pulley 20 tooth", "GT3 20T 8mm bore", "3GT 20T", "GT3 20 teeth bore 8", "GT3", "belt profile=GT3; teeth=20; bore=8 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-20T-B10-W6"
title = "GT3 20 teeth, bore 10, belt 6 mm"
params = { profile = "3GT", teeth = 20, belt_width = 6, bore = 10, hub = false }
aliases = ["GT3 20 tooth", "GT3 20T", "GT3 pulley 20 tooth", "GT3 20T 10mm bore", "3GT 20T", "GT3 20 teeth bore 10", "GT3", "belt profile=GT3; teeth=20; bore=10 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-20T-B3-W9"
title = "GT3 20 teeth, bore 3, belt 9 mm"
params = { profile = "3GT", teeth = 20, belt_width = 9, bore = 3, hub = false }
aliases = ["GT3 20 tooth", "GT3 20T", "GT3 pulley 20 tooth", "GT3 20T 3mm bore", "3GT 20T", "GT3 20 teeth bore 3", "GT3", "belt profile=GT3; teeth=20; bore=3 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-20T-B4-W9"
title = "GT3 20 teeth, bore 4, belt 9 mm"
params = { profile = "3GT", teeth = 20, belt_width = 9, bore = 4, hub = false }
aliases = ["GT3 20 tooth", "GT3 20T", "GT3 pulley 20 tooth", "GT3 20T 4mm bore", "3GT 20T", "GT3 20 teeth bore 4", "GT3", "belt profile=GT3; teeth=20; bore=4 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-20T-B5-W9"
title = "GT3 20 teeth, bore 5, belt 9 mm"
params = { profile = "3GT", teeth = 20, belt_width = 9, bore = 5, hub = false }
aliases = ["GT3 20 tooth", "GT3 20T", "GT3 pulley 20 tooth", "GT3 20T 5mm bore", "3GT 20T", "GT3 20 teeth bore 5", "GT3", "belt profile=GT3; teeth=20; bore=5 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-20T-B6-W9"
title = "GT3 20 teeth, bore 6, belt 9 mm"
params = { profile = "3GT", teeth = 20, belt_width = 9, bore = 6, hub = false }
aliases = ["GT3 20 tooth", "GT3 20T", "GT3 pulley 20 tooth", "GT3 20T 6mm bore", "3GT 20T", "GT3 20 teeth bore 6", "GT3", "belt profile=GT3; teeth=20; bore=6 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-20T-B6.35-W9"
title = "GT3 20 teeth, bore 6.35, belt 9 mm"
params = { profile = "3GT", teeth = 20, belt_width = 9, bore = 6.35, hub = false }
aliases = ["GT3 20 tooth", "GT3 20T", "GT3 pulley 20 tooth", "GT3 20T 6.35mm bore", "3GT 20T", "GT3 20 teeth bore 6.35", "GT3", "belt profile=GT3; teeth=20; bore=6.35 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-20T-B8-W9"
title = "GT3 20 teeth, bore 8, belt 9 mm"
params = { profile = "3GT", teeth = 20, belt_width = 9, bore = 8, hub = false }
aliases = ["GT3 20 tooth", "GT3 20T", "GT3 pulley 20 tooth", "GT3 20T 8mm bore", "3GT 20T", "GT3 20 teeth bore 8", "GT3", "belt profile=GT3; teeth=20; bore=8 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-20T-B10-W9"
title = "GT3 20 teeth, bore 10, belt 9 mm"
params = { profile = "3GT", teeth = 20, belt_width = 9, bore = 10, hub = false }
aliases = ["GT3 20 tooth", "GT3 20T", "GT3 pulley 20 tooth", "GT3 20T 10mm bore", "3GT 20T", "GT3 20 teeth bore 10", "GT3", "belt profile=GT3; teeth=20; bore=10 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-24T-B3-W6"
title = "GT3 24 teeth, bore 3, belt 6 mm"
params = { profile = "3GT", teeth = 24, belt_width = 6, bore = 3, hub = false }
aliases = ["GT3 24 tooth", "GT3 24T", "GT3 pulley 24 tooth", "GT3 24T 3mm bore", "3GT 24T", "GT3 24 teeth bore 3", "GT3", "belt profile=GT3; teeth=24; bore=3 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-24T-B4-W6"
title = "GT3 24 teeth, bore 4, belt 6 mm"
params = { profile = "3GT", teeth = 24, belt_width = 6, bore = 4, hub = false }
aliases = ["GT3 24 tooth", "GT3 24T", "GT3 pulley 24 tooth", "GT3 24T 4mm bore", "3GT 24T", "GT3 24 teeth bore 4", "GT3", "belt profile=GT3; teeth=24; bore=4 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-24T-B5-W6"
title = "GT3 24 teeth, bore 5, belt 6 mm"
params = { profile = "3GT", teeth = 24, belt_width = 6, bore = 5, hub = false }
aliases = ["GT3 24 tooth", "GT3 24T", "GT3 pulley 24 tooth", "GT3 24T 5mm bore", "3GT 24T", "GT3 24 teeth bore 5", "GT3", "belt profile=GT3; teeth=24; bore=5 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-24T-B6-W6"
title = "GT3 24 teeth, bore 6, belt 6 mm"
params = { profile = "3GT", teeth = 24, belt_width = 6, bore = 6, hub = false }
aliases = ["GT3 24 tooth", "GT3 24T", "GT3 pulley 24 tooth", "GT3 24T 6mm bore", "3GT 24T", "GT3 24 teeth bore 6", "GT3", "belt profile=GT3; teeth=24; bore=6 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-24T-B6.35-W6"
title = "GT3 24 teeth, bore 6.35, belt 6 mm"
params = { profile = "3GT", teeth = 24, belt_width = 6, bore = 6.35, hub = false }
aliases = ["GT3 24 tooth", "GT3 24T", "GT3 pulley 24 tooth", "GT3 24T 6.35mm bore", "3GT 24T", "GT3 24 teeth bore 6.35", "GT3", "belt profile=GT3; teeth=24; bore=6.35 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-24T-B8-W6"
title = "GT3 24 teeth, bore 8, belt 6 mm"
params = { profile = "3GT", teeth = 24, belt_width = 6, bore = 8, hub = false }
aliases = ["GT3 24 tooth", "GT3 24T", "GT3 pulley 24 tooth", "GT3 24T 8mm bore", "3GT 24T", "GT3 24 teeth bore 8", "GT3", "belt profile=GT3; teeth=24; bore=8 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-24T-B10-W6"
title = "GT3 24 teeth, bore 10, belt 6 mm"
params = { profile = "3GT", teeth = 24, belt_width = 6, bore = 10, hub = false }
aliases = ["GT3 24 tooth", "GT3 24T", "GT3 pulley 24 tooth", "GT3 24T 10mm bore", "3GT 24T", "GT3 24 teeth bore 10", "GT3", "belt profile=GT3; teeth=24; bore=10 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-24T-B3-W9"
title = "GT3 24 teeth, bore 3, belt 9 mm"
params = { profile = "3GT", teeth = 24, belt_width = 9, bore = 3, hub = false }
aliases = ["GT3 24 tooth", "GT3 24T", "GT3 pulley 24 tooth", "GT3 24T 3mm bore", "3GT 24T", "GT3 24 teeth bore 3", "GT3", "belt profile=GT3; teeth=24; bore=3 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-24T-B4-W9"
title = "GT3 24 teeth, bore 4, belt 9 mm"
params = { profile = "3GT", teeth = 24, belt_width = 9, bore = 4, hub = false }
aliases = ["GT3 24 tooth", "GT3 24T", "GT3 pulley 24 tooth", "GT3 24T 4mm bore", "3GT 24T", "GT3 24 teeth bore 4", "GT3", "belt profile=GT3; teeth=24; bore=4 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-24T-B5-W9"
title = "GT3 24 teeth, bore 5, belt 9 mm"
params = { profile = "3GT", teeth = 24, belt_width = 9, bore = 5, hub = false }
aliases = ["GT3 24 tooth", "GT3 24T", "GT3 pulley 24 tooth", "GT3 24T 5mm bore", "3GT 24T", "GT3 24 teeth bore 5", "GT3", "belt profile=GT3; teeth=24; bore=5 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-24T-B6-W9"
title = "GT3 24 teeth, bore 6, belt 9 mm"
params = { profile = "3GT", teeth = 24, belt_width = 9, bore = 6, hub = false }
aliases = ["GT3 24 tooth", "GT3 24T", "GT3 pulley 24 tooth", "GT3 24T 6mm bore", "3GT 24T", "GT3 24 teeth bore 6", "GT3", "belt profile=GT3; teeth=24; bore=6 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-24T-B6.35-W9"
title = "GT3 24 teeth, bore 6.35, belt 9 mm"
params = { profile = "3GT", teeth = 24, belt_width = 9, bore = 6.35, hub = false }
aliases = ["GT3 24 tooth", "GT3 24T", "GT3 pulley 24 tooth", "GT3 24T 6.35mm bore", "3GT 24T", "GT3 24 teeth bore 6.35", "GT3", "belt profile=GT3; teeth=24; bore=6.35 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-24T-B8-W9"
title = "GT3 24 teeth, bore 8, belt 9 mm"
params = { profile = "3GT", teeth = 24, belt_width = 9, bore = 8, hub = false }
aliases = ["GT3 24 tooth", "GT3 24T", "GT3 pulley 24 tooth", "GT3 24T 8mm bore", "3GT 24T", "GT3 24 teeth bore 8", "GT3", "belt profile=GT3; teeth=24; bore=8 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-24T-B10-W9"
title = "GT3 24 teeth, bore 10, belt 9 mm"
params = { profile = "3GT", teeth = 24, belt_width = 9, bore = 10, hub = false }
aliases = ["GT3 24 tooth", "GT3 24T", "GT3 pulley 24 tooth", "GT3 24T 10mm bore", "3GT 24T", "GT3 24 teeth bore 10", "GT3", "belt profile=GT3; teeth=24; bore=10 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-30T-B3-W6"
title = "GT3 30 teeth, bore 3, belt 6 mm"
params = { profile = "3GT", teeth = 30, belt_width = 6, bore = 3, hub = false }
aliases = ["GT3 30 tooth", "GT3 30T", "GT3 pulley 30 tooth", "GT3 30T 3mm bore", "3GT 30T", "GT3 30 teeth bore 3", "GT3", "belt profile=GT3; teeth=30; bore=3 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-30T-B4-W6"
title = "GT3 30 teeth, bore 4, belt 6 mm"
params = { profile = "3GT", teeth = 30, belt_width = 6, bore = 4, hub = false }
aliases = ["GT3 30 tooth", "GT3 30T", "GT3 pulley 30 tooth", "GT3 30T 4mm bore", "3GT 30T", "GT3 30 teeth bore 4", "GT3", "belt profile=GT3; teeth=30; bore=4 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-30T-B5-W6"
title = "GT3 30 teeth, bore 5, belt 6 mm"
params = { profile = "3GT", teeth = 30, belt_width = 6, bore = 5, hub = false }
aliases = ["GT3 30 tooth", "GT3 30T", "GT3 pulley 30 tooth", "GT3 30T 5mm bore", "3GT 30T", "GT3 30 teeth bore 5", "GT3", "belt profile=GT3; teeth=30; bore=5 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-30T-B6-W6"
title = "GT3 30 teeth, bore 6, belt 6 mm"
params = { profile = "3GT", teeth = 30, belt_width = 6, bore = 6, hub = false }
aliases = ["GT3 30 tooth", "GT3 30T", "GT3 pulley 30 tooth", "GT3 30T 6mm bore", "3GT 30T", "GT3 30 teeth bore 6", "GT3", "belt profile=GT3; teeth=30; bore=6 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-30T-B6.35-W6"
title = "GT3 30 teeth, bore 6.35, belt 6 mm"
params = { profile = "3GT", teeth = 30, belt_width = 6, bore = 6.35, hub = false }
aliases = ["GT3 30 tooth", "GT3 30T", "GT3 pulley 30 tooth", "GT3 30T 6.35mm bore", "3GT 30T", "GT3 30 teeth bore 6.35", "GT3", "belt profile=GT3; teeth=30; bore=6.35 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-30T-B8-W6"
title = "GT3 30 teeth, bore 8, belt 6 mm"
params = { profile = "3GT", teeth = 30, belt_width = 6, bore = 8, hub = false }
aliases = ["GT3 30 tooth", "GT3 30T", "GT3 pulley 30 tooth", "GT3 30T 8mm bore", "3GT 30T", "GT3 30 teeth bore 8", "GT3", "belt profile=GT3; teeth=30; bore=8 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-30T-B10-W6"
title = "GT3 30 teeth, bore 10, belt 6 mm"
params = { profile = "3GT", teeth = 30, belt_width = 6, bore = 10, hub = false }
aliases = ["GT3 30 tooth", "GT3 30T", "GT3 pulley 30 tooth", "GT3 30T 10mm bore", "3GT 30T", "GT3 30 teeth bore 10", "GT3", "belt profile=GT3; teeth=30; bore=10 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-30T-B3-W9"
title = "GT3 30 teeth, bore 3, belt 9 mm"
params = { profile = "3GT", teeth = 30, belt_width = 9, bore = 3, hub = false }
aliases = ["GT3 30 tooth", "GT3 30T", "GT3 pulley 30 tooth", "GT3 30T 3mm bore", "3GT 30T", "GT3 30 teeth bore 3", "GT3", "belt profile=GT3; teeth=30; bore=3 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-30T-B4-W9"
title = "GT3 30 teeth, bore 4, belt 9 mm"
params = { profile = "3GT", teeth = 30, belt_width = 9, bore = 4, hub = false }
aliases = ["GT3 30 tooth", "GT3 30T", "GT3 pulley 30 tooth", "GT3 30T 4mm bore", "3GT 30T", "GT3 30 teeth bore 4", "GT3", "belt profile=GT3; teeth=30; bore=4 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-30T-B5-W9"
title = "GT3 30 teeth, bore 5, belt 9 mm"
params = { profile = "3GT", teeth = 30, belt_width = 9, bore = 5, hub = false }
aliases = ["GT3 30 tooth", "GT3 30T", "GT3 pulley 30 tooth", "GT3 30T 5mm bore", "3GT 30T", "GT3 30 teeth bore 5", "GT3", "belt profile=GT3; teeth=30; bore=5 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-30T-B6-W9"
title = "GT3 30 teeth, bore 6, belt 9 mm"
params = { profile = "3GT", teeth = 30, belt_width = 9, bore = 6, hub = false }
aliases = ["GT3 30 tooth", "GT3 30T", "GT3 pulley 30 tooth", "GT3 30T 6mm bore", "3GT 30T", "GT3 30 teeth bore 6", "GT3", "belt profile=GT3; teeth=30; bore=6 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-30T-B6.35-W9"
title = "GT3 30 teeth, bore 6.35, belt 9 mm"
params = { profile = "3GT", teeth = 30, belt_width = 9, bore = 6.35, hub = false }
aliases = ["GT3 30 tooth", "GT3 30T", "GT3 pulley 30 tooth", "GT3 30T 6.35mm bore", "3GT 30T", "GT3 30 teeth bore 6.35", "GT3", "belt profile=GT3; teeth=30; bore=6.35 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-30T-B8-W9"
title = "GT3 30 teeth, bore 8, belt 9 mm"
params = { profile = "3GT", teeth = 30, belt_width = 9, bore = 8, hub = false }
aliases = ["GT3 30 tooth", "GT3 30T", "GT3 pulley 30 tooth", "GT3 30T 8mm bore", "3GT 30T", "GT3 30 teeth bore 8", "GT3", "belt profile=GT3; teeth=30; bore=8 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-30T-B10-W9"
title = "GT3 30 teeth, bore 10, belt 9 mm"
params = { profile = "3GT", teeth = 30, belt_width = 9, bore = 10, hub = false }
aliases = ["GT3 30 tooth", "GT3 30T", "GT3 pulley 30 tooth", "GT3 30T 10mm bore", "3GT 30T", "GT3 30 teeth bore 10", "GT3", "belt profile=GT3; teeth=30; bore=10 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-36T-B3-W6"
title = "GT3 36 teeth, bore 3, belt 6 mm"
params = { profile = "3GT", teeth = 36, belt_width = 6, bore = 3, hub = false }
aliases = ["GT3 36 tooth", "GT3 36T", "GT3 pulley 36 tooth", "GT3 36T 3mm bore", "3GT 36T", "GT3 36 teeth bore 3", "GT3", "belt profile=GT3; teeth=36; bore=3 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-36T-B4-W6"
title = "GT3 36 teeth, bore 4, belt 6 mm"
params = { profile = "3GT", teeth = 36, belt_width = 6, bore = 4, hub = false }
aliases = ["GT3 36 tooth", "GT3 36T", "GT3 pulley 36 tooth", "GT3 36T 4mm bore", "3GT 36T", "GT3 36 teeth bore 4", "GT3", "belt profile=GT3; teeth=36; bore=4 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-36T-B5-W6"
title = "GT3 36 teeth, bore 5, belt 6 mm"
params = { profile = "3GT", teeth = 36, belt_width = 6, bore = 5, hub = false }
aliases = ["GT3 36 tooth", "GT3 36T", "GT3 pulley 36 tooth", "GT3 36T 5mm bore", "3GT 36T", "GT3 36 teeth bore 5", "GT3", "belt profile=GT3; teeth=36; bore=5 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-36T-B6-W6"
title = "GT3 36 teeth, bore 6, belt 6 mm"
params = { profile = "3GT", teeth = 36, belt_width = 6, bore = 6, hub = false }
aliases = ["GT3 36 tooth", "GT3 36T", "GT3 pulley 36 tooth", "GT3 36T 6mm bore", "3GT 36T", "GT3 36 teeth bore 6", "GT3", "belt profile=GT3; teeth=36; bore=6 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-36T-B6.35-W6"
title = "GT3 36 teeth, bore 6.35, belt 6 mm"
params = { profile = "3GT", teeth = 36, belt_width = 6, bore = 6.35, hub = false }
aliases = ["GT3 36 tooth", "GT3 36T", "GT3 pulley 36 tooth", "GT3 36T 6.35mm bore", "3GT 36T", "GT3 36 teeth bore 6.35", "GT3", "belt profile=GT3; teeth=36; bore=6.35 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-36T-B8-W6"
title = "GT3 36 teeth, bore 8, belt 6 mm"
params = { profile = "3GT", teeth = 36, belt_width = 6, bore = 8, hub = false }
aliases = ["GT3 36 tooth", "GT3 36T", "GT3 pulley 36 tooth", "GT3 36T 8mm bore", "3GT 36T", "GT3 36 teeth bore 8", "GT3", "belt profile=GT3; teeth=36; bore=8 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-36T-B10-W6"
title = "GT3 36 teeth, bore 10, belt 6 mm"
params = { profile = "3GT", teeth = 36, belt_width = 6, bore = 10, hub = false }
aliases = ["GT3 36 tooth", "GT3 36T", "GT3 pulley 36 tooth", "GT3 36T 10mm bore", "3GT 36T", "GT3 36 teeth bore 10", "GT3", "belt profile=GT3; teeth=36; bore=10 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-36T-B3-W9"
title = "GT3 36 teeth, bore 3, belt 9 mm"
params = { profile = "3GT", teeth = 36, belt_width = 9, bore = 3, hub = false }
aliases = ["GT3 36 tooth", "GT3 36T", "GT3 pulley 36 tooth", "GT3 36T 3mm bore", "3GT 36T", "GT3 36 teeth bore 3", "GT3", "belt profile=GT3; teeth=36; bore=3 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-36T-B4-W9"
title = "GT3 36 teeth, bore 4, belt 9 mm"
params = { profile = "3GT", teeth = 36, belt_width = 9, bore = 4, hub = false }
aliases = ["GT3 36 tooth", "GT3 36T", "GT3 pulley 36 tooth", "GT3 36T 4mm bore", "3GT 36T", "GT3 36 teeth bore 4", "GT3", "belt profile=GT3; teeth=36; bore=4 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-36T-B5-W9"
title = "GT3 36 teeth, bore 5, belt 9 mm"
params = { profile = "3GT", teeth = 36, belt_width = 9, bore = 5, hub = false }
aliases = ["GT3 36 tooth", "GT3 36T", "GT3 pulley 36 tooth", "GT3 36T 5mm bore", "3GT 36T", "GT3 36 teeth bore 5", "GT3", "belt profile=GT3; teeth=36; bore=5 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-36T-B6-W9"
title = "GT3 36 teeth, bore 6, belt 9 mm"
params = { profile = "3GT", teeth = 36, belt_width = 9, bore = 6, hub = false }
aliases = ["GT3 36 tooth", "GT3 36T", "GT3 pulley 36 tooth", "GT3 36T 6mm bore", "3GT 36T", "GT3 36 teeth bore 6", "GT3", "belt profile=GT3; teeth=36; bore=6 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-36T-B6.35-W9"
title = "GT3 36 teeth, bore 6.35, belt 9 mm"
params = { profile = "3GT", teeth = 36, belt_width = 9, bore = 6.35, hub = false }
aliases = ["GT3 36 tooth", "GT3 36T", "GT3 pulley 36 tooth", "GT3 36T 6.35mm bore", "3GT 36T", "GT3 36 teeth bore 6.35", "GT3", "belt profile=GT3; teeth=36; bore=6.35 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-36T-B8-W9"
title = "GT3 36 teeth, bore 8, belt 9 mm"
params = { profile = "3GT", teeth = 36, belt_width = 9, bore = 8, hub = false }
aliases = ["GT3 36 tooth", "GT3 36T", "GT3 pulley 36 tooth", "GT3 36T 8mm bore", "3GT 36T", "GT3 36 teeth bore 8", "GT3", "belt profile=GT3; teeth=36; bore=8 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-36T-B10-W9"
title = "GT3 36 teeth, bore 10, belt 9 mm"
params = { profile = "3GT", teeth = 36, belt_width = 9, bore = 10, hub = false }
aliases = ["GT3 36 tooth", "GT3 36T", "GT3 pulley 36 tooth", "GT3 36T 10mm bore", "3GT 36T", "GT3 36 teeth bore 10", "GT3", "belt profile=GT3; teeth=36; bore=10 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-40T-B3-W6"
title = "GT3 40 teeth, bore 3, belt 6 mm"
params = { profile = "3GT", teeth = 40, belt_width = 6, bore = 3, hub = false }
aliases = ["GT3 40 tooth", "GT3 40T", "GT3 pulley 40 tooth", "GT3 40T 3mm bore", "3GT 40T", "GT3 40 teeth bore 3", "GT3", "belt profile=GT3; teeth=40; bore=3 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-40T-B4-W6"
title = "GT3 40 teeth, bore 4, belt 6 mm"
params = { profile = "3GT", teeth = 40, belt_width = 6, bore = 4, hub = false }
aliases = ["GT3 40 tooth", "GT3 40T", "GT3 pulley 40 tooth", "GT3 40T 4mm bore", "3GT 40T", "GT3 40 teeth bore 4", "GT3", "belt profile=GT3; teeth=40; bore=4 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-40T-B5-W6"
title = "GT3 40 teeth, bore 5, belt 6 mm"
params = { profile = "3GT", teeth = 40, belt_width = 6, bore = 5, hub = false }
aliases = ["GT3 40 tooth", "GT3 40T", "GT3 pulley 40 tooth", "GT3 40T 5mm bore", "3GT 40T", "GT3 40 teeth bore 5", "GT3", "belt profile=GT3; teeth=40; bore=5 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-40T-B6-W6"
title = "GT3 40 teeth, bore 6, belt 6 mm"
params = { profile = "3GT", teeth = 40, belt_width = 6, bore = 6, hub = false }
aliases = ["GT3 40 tooth", "GT3 40T", "GT3 pulley 40 tooth", "GT3 40T 6mm bore", "3GT 40T", "GT3 40 teeth bore 6", "GT3", "belt profile=GT3; teeth=40; bore=6 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-40T-B6.35-W6"
title = "GT3 40 teeth, bore 6.35, belt 6 mm"
params = { profile = "3GT", teeth = 40, belt_width = 6, bore = 6.35, hub = false }
aliases = ["GT3 40 tooth", "GT3 40T", "GT3 pulley 40 tooth", "GT3 40T 6.35mm bore", "3GT 40T", "GT3 40 teeth bore 6.35", "GT3", "belt profile=GT3; teeth=40; bore=6.35 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-40T-B8-W6"
title = "GT3 40 teeth, bore 8, belt 6 mm"
params = { profile = "3GT", teeth = 40, belt_width = 6, bore = 8, hub = false }
aliases = ["GT3 40 tooth", "GT3 40T", "GT3 pulley 40 tooth", "GT3 40T 8mm bore", "3GT 40T", "GT3 40 teeth bore 8", "GT3", "belt profile=GT3; teeth=40; bore=8 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-40T-B10-W6"
title = "GT3 40 teeth, bore 10, belt 6 mm"
params = { profile = "3GT", teeth = 40, belt_width = 6, bore = 10, hub = false }
aliases = ["GT3 40 tooth", "GT3 40T", "GT3 pulley 40 tooth", "GT3 40T 10mm bore", "3GT 40T", "GT3 40 teeth bore 10", "GT3", "belt profile=GT3; teeth=40; bore=10 mm; belt width=6 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-40T-B3-W9"
title = "GT3 40 teeth, bore 3, belt 9 mm"
params = { profile = "3GT", teeth = 40, belt_width = 9, bore = 3, hub = false }
aliases = ["GT3 40 tooth", "GT3 40T", "GT3 pulley 40 tooth", "GT3 40T 3mm bore", "3GT 40T", "GT3 40 teeth bore 3", "GT3", "belt profile=GT3; teeth=40; bore=3 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-40T-B4-W9"
title = "GT3 40 teeth, bore 4, belt 9 mm"
params = { profile = "3GT", teeth = 40, belt_width = 9, bore = 4, hub = false }
aliases = ["GT3 40 tooth", "GT3 40T", "GT3 pulley 40 tooth", "GT3 40T 4mm bore", "3GT 40T", "GT3 40 teeth bore 4", "GT3", "belt profile=GT3; teeth=40; bore=4 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-40T-B5-W9"
title = "GT3 40 teeth, bore 5, belt 9 mm"
params = { profile = "3GT", teeth = 40, belt_width = 9, bore = 5, hub = false }
aliases = ["GT3 40 tooth", "GT3 40T", "GT3 pulley 40 tooth", "GT3 40T 5mm bore", "3GT 40T", "GT3 40 teeth bore 5", "GT3", "belt profile=GT3; teeth=40; bore=5 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-40T-B6-W9"
title = "GT3 40 teeth, bore 6, belt 9 mm"
params = { profile = "3GT", teeth = 40, belt_width = 9, bore = 6, hub = false }
aliases = ["GT3 40 tooth", "GT3 40T", "GT3 pulley 40 tooth", "GT3 40T 6mm bore", "3GT 40T", "GT3 40 teeth bore 6", "GT3", "belt profile=GT3; teeth=40; bore=6 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-40T-B6.35-W9"
title = "GT3 40 teeth, bore 6.35, belt 9 mm"
params = { profile = "3GT", teeth = 40, belt_width = 9, bore = 6.35, hub = false }
aliases = ["GT3 40 tooth", "GT3 40T", "GT3 pulley 40 tooth", "GT3 40T 6.35mm bore", "3GT 40T", "GT3 40 teeth bore 6.35", "GT3", "belt profile=GT3; teeth=40; bore=6.35 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-40T-B8-W9"
title = "GT3 40 teeth, bore 8, belt 9 mm"
params = { profile = "3GT", teeth = 40, belt_width = 9, bore = 8, hub = false }
aliases = ["GT3 40 tooth", "GT3 40T", "GT3 pulley 40 tooth", "GT3 40T 8mm bore", "3GT 40T", "GT3 40 teeth bore 8", "GT3", "belt profile=GT3; teeth=40; bore=8 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "GT3-40T-B10-W9"
title = "GT3 40 teeth, bore 10, belt 9 mm"
params = { profile = "3GT", teeth = 40, belt_width = 9, bore = 10, hub = false }
aliases = ["GT3 40 tooth", "GT3 40T", "GT3 pulley 40 tooth", "GT3 40T 10mm bore", "3GT 40T", "GT3 40 teeth bore 10", "GT3", "belt profile=GT3; teeth=40; bore=10 mm; belt width=9 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "MXL-20T-B3-W6.4"
title = "MXL 20 teeth, bore 3, belt 6.4 mm"
params = { profile = "MXL", teeth = 20, belt_width = 6.4, bore = 3, hub = false }
aliases = ["MXL 20 tooth", "MXL 20T", "MXL pulley 20 tooth", "MXL 20T 3mm bore", "MXL 20 teeth bore 3", "MXL", "belt profile=MXL; teeth=20; bore=3 mm; belt width=6.35 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "MXL-20T-B4-W6.4"
title = "MXL 20 teeth, bore 4, belt 6.4 mm"
params = { profile = "MXL", teeth = 20, belt_width = 6.4, bore = 4, hub = false }
aliases = ["MXL 20 tooth", "MXL 20T", "MXL pulley 20 tooth", "MXL 20T 4mm bore", "MXL 20 teeth bore 4", "MXL", "belt profile=MXL; teeth=20; bore=4 mm; belt width=6.35 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "MXL-20T-B5-W6.4"
title = "MXL 20 teeth, bore 5, belt 6.4 mm"
params = { profile = "MXL", teeth = 20, belt_width = 6.4, bore = 5, hub = false }
aliases = ["MXL 20 tooth", "MXL 20T", "MXL pulley 20 tooth", "MXL 20T 5mm bore", "MXL 20 teeth bore 5", "MXL", "belt profile=MXL; teeth=20; bore=5 mm; belt width=6.35 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "MXL-20T-B6-W6.4"
title = "MXL 20 teeth, bore 6, belt 6.4 mm"
params = { profile = "MXL", teeth = 20, belt_width = 6.4, bore = 6, hub = false }
aliases = ["MXL 20 tooth", "MXL 20T", "MXL pulley 20 tooth", "MXL 20T 6mm bore", "MXL 20 teeth bore 6", "MXL", "belt profile=MXL; teeth=20; bore=6 mm; belt width=6.35 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "MXL-20T-B6.35-W6.4"
title = "MXL 20 teeth, bore 6.35, belt 6.4 mm"
params = { profile = "MXL", teeth = 20, belt_width = 6.4, bore = 6.35, hub = false }
aliases = ["MXL 20 tooth", "MXL 20T", "MXL pulley 20 tooth", "MXL 20T 6.35mm bore", "MXL 20 teeth bore 6.35", "MXL", "belt profile=MXL; teeth=20; bore=6.35 mm; belt width=6.35 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "MXL-20T-B8-W6.4"
title = "MXL 20 teeth, bore 8, belt 6.4 mm"
params = { profile = "MXL", teeth = 20, belt_width = 6.4, bore = 8, hub = false }
aliases = ["MXL 20 tooth", "MXL 20T", "MXL pulley 20 tooth", "MXL 20T 8mm bore", "MXL 20 teeth bore 8", "MXL", "belt profile=MXL; teeth=20; bore=8 mm; belt width=6.35 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "MXL-24T-B3-W6.4"
title = "MXL 24 teeth, bore 3, belt 6.4 mm"
params = { profile = "MXL", teeth = 24, belt_width = 6.4, bore = 3, hub = false }
aliases = ["MXL 24 tooth", "MXL 24T", "MXL pulley 24 tooth", "MXL 24T 3mm bore", "MXL 24 teeth bore 3", "MXL", "belt profile=MXL; teeth=24; bore=3 mm; belt width=6.35 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "MXL-24T-B4-W6.4"
title = "MXL 24 teeth, bore 4, belt 6.4 mm"
params = { profile = "MXL", teeth = 24, belt_width = 6.4, bore = 4, hub = false }
aliases = ["MXL 24 tooth", "MXL 24T", "MXL pulley 24 tooth", "MXL 24T 4mm bore", "MXL 24 teeth bore 4", "MXL", "belt profile=MXL; teeth=24; bore=4 mm; belt width=6.35 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "MXL-24T-B5-W6.4"
title = "MXL 24 teeth, bore 5, belt 6.4 mm"
params = { profile = "MXL", teeth = 24, belt_width = 6.4, bore = 5, hub = false }
aliases = ["MXL 24 tooth", "MXL 24T", "MXL pulley 24 tooth", "MXL 24T 5mm bore", "MXL 24 teeth bore 5", "MXL", "belt profile=MXL; teeth=24; bore=5 mm; belt width=6.35 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "MXL-24T-B6-W6.4"
title = "MXL 24 teeth, bore 6, belt 6.4 mm"
params = { profile = "MXL", teeth = 24, belt_width = 6.4, bore = 6, hub = false }
aliases = ["MXL 24 tooth", "MXL 24T", "MXL pulley 24 tooth", "MXL 24T 6mm bore", "MXL 24 teeth bore 6", "MXL", "belt profile=MXL; teeth=24; bore=6 mm; belt width=6.35 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "MXL-24T-B6.35-W6.4"
title = "MXL 24 teeth, bore 6.35, belt 6.4 mm"
params = { profile = "MXL", teeth = 24, belt_width = 6.4, bore = 6.35, hub = false }
aliases = ["MXL 24 tooth", "MXL 24T", "MXL pulley 24 tooth", "MXL 24T 6.35mm bore", "MXL 24 teeth bore 6.35", "MXL", "belt profile=MXL; teeth=24; bore=6.35 mm; belt width=6.35 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "MXL-24T-B8-W6.4"
title = "MXL 24 teeth, bore 8, belt 6.4 mm"
params = { profile = "MXL", teeth = 24, belt_width = 6.4, bore = 8, hub = false }
aliases = ["MXL 24 tooth", "MXL 24T", "MXL pulley 24 tooth", "MXL 24T 8mm bore", "MXL 24 teeth bore 8", "MXL", "belt profile=MXL; teeth=24; bore=8 mm; belt width=6.35 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "MXL-24T-B10-W6.4"
title = "MXL 24 teeth, bore 10, belt 6.4 mm"
params = { profile = "MXL", teeth = 24, belt_width = 6.4, bore = 10, hub = false }
aliases = ["MXL 24 tooth", "MXL 24T", "MXL pulley 24 tooth", "MXL 24T 10mm bore", "MXL 24 teeth bore 10", "MXL", "belt profile=MXL; teeth=24; bore=10 mm; belt width=6.35 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "MXL-30T-B3-W6.4"
title = "MXL 30 teeth, bore 3, belt 6.4 mm"
params = { profile = "MXL", teeth = 30, belt_width = 6.4, bore = 3, hub = false }
aliases = ["MXL 30 tooth", "MXL 30T", "MXL pulley 30 tooth", "MXL 30T 3mm bore", "MXL 30 teeth bore 3", "MXL", "belt profile=MXL; teeth=30; bore=3 mm; belt width=6.35 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "MXL-30T-B4-W6.4"
title = "MXL 30 teeth, bore 4, belt 6.4 mm"
params = { profile = "MXL", teeth = 30, belt_width = 6.4, bore = 4, hub = false }
aliases = ["MXL 30 tooth", "MXL 30T", "MXL pulley 30 tooth", "MXL 30T 4mm bore", "MXL 30 teeth bore 4", "MXL", "belt profile=MXL; teeth=30; bore=4 mm; belt width=6.35 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "MXL-30T-B5-W6.4"
title = "MXL 30 teeth, bore 5, belt 6.4 mm"
params = { profile = "MXL", teeth = 30, belt_width = 6.4, bore = 5, hub = false }
aliases = ["MXL 30 tooth", "MXL 30T", "MXL pulley 30 tooth", "MXL 30T 5mm bore", "MXL 30 teeth bore 5", "MXL", "belt profile=MXL; teeth=30; bore=5 mm; belt width=6.35 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "MXL-30T-B6-W6.4"
title = "MXL 30 teeth, bore 6, belt 6.4 mm"
params = { profile = "MXL", teeth = 30, belt_width = 6.4, bore = 6, hub = false }
aliases = ["MXL 30 tooth", "MXL 30T", "MXL pulley 30 tooth", "MXL 30T 6mm bore", "MXL 30 teeth bore 6", "MXL", "belt profile=MXL; teeth=30; bore=6 mm; belt width=6.35 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "MXL-30T-B6.35-W6.4"
title = "MXL 30 teeth, bore 6.35, belt 6.4 mm"
params = { profile = "MXL", teeth = 30, belt_width = 6.4, bore = 6.35, hub = false }
aliases = ["MXL 30 tooth", "MXL 30T", "MXL pulley 30 tooth", "MXL 30T 6.35mm bore", "MXL 30 teeth bore 6.35", "MXL", "belt profile=MXL; teeth=30; bore=6.35 mm; belt width=6.35 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "MXL-30T-B8-W6.4"
title = "MXL 30 teeth, bore 8, belt 6.4 mm"
params = { profile = "MXL", teeth = 30, belt_width = 6.4, bore = 8, hub = false }
aliases = ["MXL 30 tooth", "MXL 30T", "MXL pulley 30 tooth", "MXL 30T 8mm bore", "MXL 30 teeth bore 8", "MXL", "belt profile=MXL; teeth=30; bore=8 mm; belt width=6.35 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "MXL-30T-B10-W6.4"
title = "MXL 30 teeth, bore 10, belt 6.4 mm"
params = { profile = "MXL", teeth = 30, belt_width = 6.4, bore = 10, hub = false }
aliases = ["MXL 30 tooth", "MXL 30T", "MXL pulley 30 tooth", "MXL 30T 10mm bore", "MXL 30 teeth bore 10", "MXL", "belt profile=MXL; teeth=30; bore=10 mm; belt width=6.35 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "MXL-36T-B3-W6.4"
title = "MXL 36 teeth, bore 3, belt 6.4 mm"
params = { profile = "MXL", teeth = 36, belt_width = 6.4, bore = 3, hub = false }
aliases = ["MXL 36 tooth", "MXL 36T", "MXL pulley 36 tooth", "MXL 36T 3mm bore", "MXL 36 teeth bore 3", "MXL", "belt profile=MXL; teeth=36; bore=3 mm; belt width=6.35 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "MXL-36T-B4-W6.4"
title = "MXL 36 teeth, bore 4, belt 6.4 mm"
params = { profile = "MXL", teeth = 36, belt_width = 6.4, bore = 4, hub = false }
aliases = ["MXL 36 tooth", "MXL 36T", "MXL pulley 36 tooth", "MXL 36T 4mm bore", "MXL 36 teeth bore 4", "MXL", "belt profile=MXL; teeth=36; bore=4 mm; belt width=6.35 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "MXL-36T-B5-W6.4"
title = "MXL 36 teeth, bore 5, belt 6.4 mm"
params = { profile = "MXL", teeth = 36, belt_width = 6.4, bore = 5, hub = false }
aliases = ["MXL 36 tooth", "MXL 36T", "MXL pulley 36 tooth", "MXL 36T 5mm bore", "MXL 36 teeth bore 5", "MXL", "belt profile=MXL; teeth=36; bore=5 mm; belt width=6.35 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "MXL-36T-B6-W6.4"
title = "MXL 36 teeth, bore 6, belt 6.4 mm"
params = { profile = "MXL", teeth = 36, belt_width = 6.4, bore = 6, hub = false }
aliases = ["MXL 36 tooth", "MXL 36T", "MXL pulley 36 tooth", "MXL 36T 6mm bore", "MXL 36 teeth bore 6", "MXL", "belt profile=MXL; teeth=36; bore=6 mm; belt width=6.35 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "MXL-36T-B6.35-W6.4"
title = "MXL 36 teeth, bore 6.35, belt 6.4 mm"
params = { profile = "MXL", teeth = 36, belt_width = 6.4, bore = 6.35, hub = false }
aliases = ["MXL 36 tooth", "MXL 36T", "MXL pulley 36 tooth", "MXL 36T 6.35mm bore", "MXL 36 teeth bore 6.35", "MXL", "belt profile=MXL; teeth=36; bore=6.35 mm; belt width=6.35 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "MXL-36T-B8-W6.4"
title = "MXL 36 teeth, bore 8, belt 6.4 mm"
params = { profile = "MXL", teeth = 36, belt_width = 6.4, bore = 8, hub = false }
aliases = ["MXL 36 tooth", "MXL 36T", "MXL pulley 36 tooth", "MXL 36T 8mm bore", "MXL 36 teeth bore 8", "MXL", "belt profile=MXL; teeth=36; bore=8 mm; belt width=6.35 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "MXL-36T-B10-W6.4"
title = "MXL 36 teeth, bore 10, belt 6.4 mm"
params = { profile = "MXL", teeth = 36, belt_width = 6.4, bore = 10, hub = false }
aliases = ["MXL 36 tooth", "MXL 36T", "MXL pulley 36 tooth", "MXL 36T 10mm bore", "MXL 36 teeth bore 10", "MXL", "belt profile=MXL; teeth=36; bore=10 mm; belt width=6.35 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "MXL-40T-B3-W6.4"
title = "MXL 40 teeth, bore 3, belt 6.4 mm"
params = { profile = "MXL", teeth = 40, belt_width = 6.4, bore = 3, hub = false }
aliases = ["MXL 40 tooth", "MXL 40T", "MXL pulley 40 tooth", "MXL 40T 3mm bore", "MXL 40 teeth bore 3", "MXL", "belt profile=MXL; teeth=40; bore=3 mm; belt width=6.35 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "MXL-40T-B4-W6.4"
title = "MXL 40 teeth, bore 4, belt 6.4 mm"
params = { profile = "MXL", teeth = 40, belt_width = 6.4, bore = 4, hub = false }
aliases = ["MXL 40 tooth", "MXL 40T", "MXL pulley 40 tooth", "MXL 40T 4mm bore", "MXL 40 teeth bore 4", "MXL", "belt profile=MXL; teeth=40; bore=4 mm; belt width=6.35 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "MXL-40T-B5-W6.4"
title = "MXL 40 teeth, bore 5, belt 6.4 mm"
params = { profile = "MXL", teeth = 40, belt_width = 6.4, bore = 5, hub = false }
aliases = ["MXL 40 tooth", "MXL 40T", "MXL pulley 40 tooth", "MXL 40T 5mm bore", "MXL 40 teeth bore 5", "MXL", "belt profile=MXL; teeth=40; bore=5 mm; belt width=6.35 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "MXL-40T-B6-W6.4"
title = "MXL 40 teeth, bore 6, belt 6.4 mm"
params = { profile = "MXL", teeth = 40, belt_width = 6.4, bore = 6, hub = false }
aliases = ["MXL 40 tooth", "MXL 40T", "MXL pulley 40 tooth", "MXL 40T 6mm bore", "MXL 40 teeth bore 6", "MXL", "belt profile=MXL; teeth=40; bore=6 mm; belt width=6.35 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "MXL-40T-B6.35-W6.4"
title = "MXL 40 teeth, bore 6.35, belt 6.4 mm"
params = { profile = "MXL", teeth = 40, belt_width = 6.4, bore = 6.35, hub = false }
aliases = ["MXL 40 tooth", "MXL 40T", "MXL pulley 40 tooth", "MXL 40T 6.35mm bore", "MXL 40 teeth bore 6.35", "MXL", "belt profile=MXL; teeth=40; bore=6.35 mm; belt width=6.35 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "MXL-40T-B8-W6.4"
title = "MXL 40 teeth, bore 8, belt 6.4 mm"
params = { profile = "MXL", teeth = 40, belt_width = 6.4, bore = 8, hub = false }
aliases = ["MXL 40 tooth", "MXL 40T", "MXL pulley 40 tooth", "MXL 40T 8mm bore", "MXL 40 teeth bore 8", "MXL", "belt profile=MXL; teeth=40; bore=8 mm; belt width=6.35 mm; flanged"]
standard = "MISUMI catalogue"

[[presets]]
id = "MXL-40T-B10-W6.4"
title = "MXL 40 teeth, bore 10, belt 6.4 mm"
params = { profile = "MXL", teeth = 40, belt_width = 6.4, bore = 10, hub = false }
aliases = ["MXL 40 tooth", "MXL 40T", "MXL pulley 40 tooth", "MXL 40T 10mm bore", "MXL 40 teeth bore 10", "MXL", "belt profile=MXL; teeth=40; bore=10 mm; belt width=6.35 mm; flanged"]
standard = "MISUMI catalogue"