name = "steve/push-in-terminal-block"
version = "1.0.0"
runtime = "steve"
license = "MIT"
summary = "PCB terminal block with push-in spring connection, Phoenix Contact types: SPT 1,5 (3.5 mm), SPT 2,5 (5.0 mm, also -EX) and SPT 5 (7.5 mm, also -ZB), horizontal or vertical."
description = """PCB terminal block with push-in spring connection, of the Phoenix Contact SPT 1,5 (3.5 mm, horizontal), SPT 2,5 (5.0 mm, horizontal or vertical, standard or Ex eb) or SPT 5 (7.5 mm, horizontal or vertical, two pins per position or zigzag -ZB) type, with wire entries, release slots and solder pins. Width, length, height and pins from Phoenix Contact's data sheets. See the README."""
tags = ["terminal-block", "push-in", "spring-terminal", "phoenix", "spt", "connector", "electronics"]

[parameters.series]
type = "choice"
default = "SPT 2,5"
choices = ["SPT 1,5", "SPT 2,5", "SPT 5"]
label = "Series"
description = "SPT 1,5: 3.5 mm pitch. SPT 2,5: 5.0 mm. SPT 5: 7.5 mm."

[parameters.style]
type = "choice"
default = "horizontal"
choices = ["horizontal", "vertical"]
label = "Style"
description = "horizontal (-H-): wires enter at the front. vertical (-V-): from the top. SPT 1,5 is horizontal only."

[parameters.positions]
type = "integer"
default = 2
min = 1
max = 12
label = "Positions"
description = "SPT 1,5 and vertical SPT 2,5: 2 to 12. Horizontal SPT 2,5 and SPT 5: 1 to 12. Zigzag pins: 2 to 12."

[parameters.pins]
type = "choice"
default = "double"
choices = ["double", "zigzag"]
label = "Pin layout"
description = "double: two solder pins per position. zigzag: one per position, alternating rows (SPT 5 ...-ZB). Horizontal SPT 5 is zigzag only."

[parameters.approval]
type = "choice"
default = "standard"
choices = ["standard", "EX"]
label = "Version"
description = "EX: the Ex eb version of SPT 2,5 (...-EX), with the same housing and pins."