# Presets of this part (factory/PRESETS.md). Written by factory/gen.py.

[[presets]]
id = "D3x25"
title = "Ø3 × 25 mm"
params = { diameter = 3, length = 25 }
aliases = ["3mm shaft 25", "3 mm linear shaft", "precision shaft 3 x 25", "ground shaft 3x25", "D3 x 25", "Ø3 mm x 25 mm"]
standard = "designation"

[[presets]]
id = "D3x50"
title = "Ø3 × 50 mm"
params = { diameter = 3, length = 50 }
aliases = ["3mm shaft 50", "3 mm linear shaft", "precision shaft 3 x 50", "ground shaft 3x50", "D3 x 50", "Ø3 mm x 50 mm"]
standard = "designation"

[[presets]]
id = "D3x75"
title = "Ø3 × 75 mm"
params = { diameter = 3, length = 75 }
aliases = ["3mm shaft 75", "3 mm linear shaft", "precision shaft 3 x 75", "ground shaft 3x75", "D3 x 75", "Ø3 mm x 75 mm"]
standard = "designation"

[[presets]]
id = "D3x100"
title = "Ø3 × 100 mm"
params = { diameter = 3, length = 100 }
aliases = ["3mm shaft 100", "3 mm linear shaft", "precision shaft 3 x 100", "ground shaft 3x100", "D3 x 100", "Ø3 mm x 100 mm"]
standard = "designation"

[[presets]]
id = "D3x150"
title = "Ø3 × 150 mm"
params = { diameter = 3, length = 150 }
aliases = ["3mm shaft 150", "3 mm linear shaft", "precision shaft 3 x 150", "ground shaft 3x150", "D3 x 150", "Ø3 mm x 150 mm"]
standard = "designation"

[[presets]]
id = "D3x200"
title = "Ø3 × 200 mm"
params = { diameter = 3, length = 200 }
aliases = ["3mm shaft 200", "3 mm linear shaft", "precision shaft 3 x 200", "ground shaft 3x200", "D3 x 200", "Ø3 mm x 200 mm"]
standard = "designation"

[[presets]]
id = "D3x250"
title = "Ø3 × 250 mm"
params = { diameter = 3, length = 250 }
aliases = ["3mm shaft 250", "3 mm linear shaft", "precision shaft 3 x 250", "ground shaft 3x250", "D3 x 250", "Ø3 mm x 250 mm"]
standard = "designation"

[[presets]]
id = "D3x300"
title = "Ø3 × 300 mm"
params = { diameter = 3, length = 300 }
aliases = ["3mm shaft 300", "3 mm linear shaft", "precision shaft 3 x 300", "ground shaft 3x300", "D3 x 300", "Ø3 mm x 300 mm"]
standard = "designation"

[[presets]]
id = "D3x400"
title = "Ø3 × 400 mm"
params = { diameter = 3, length = 400 }
aliases = ["3mm shaft 400", "3 mm linear shaft", "precision shaft 3 x 400", "ground shaft 3x400", "D3 x 400", "Ø3 mm x 400 mm"]
standard = "designation"

[[presets]]
id = "D3x500"
title = "Ø3 × 500 mm"
params = { diameter = 3, length = 500 }
aliases = ["3mm shaft 500", "3 mm linear shaft", "precision shaft 3 x 500", "ground shaft 3x500", "D3 x 500", "Ø3 mm x 500 mm"]
standard = "designation"

[[presets]]
id = "D3x600"
title = "Ø3 × 600 mm"
params = { diameter = 3, length = 600 }
aliases = ["3mm shaft 600", "3 mm linear shaft", "precision shaft 3 x 600", "ground shaft 3x600", "D3 x 600", "Ø3 mm x 600 mm"]
standard = "designation"

[[presets]]
id = "D3x750"
title = "Ø3 × 750 mm"
params = { diameter = 3, length = 750 }
aliases = ["3mm shaft 750", "3 mm linear shaft", "precision shaft 3 x 750", "ground shaft 3x750", "D3 x 750", "Ø3 mm x 750 mm"]
standard = "designation"

[[presets]]
id = "D3x1000"
title = "Ø3 × 1000 mm"
params = { diameter = 3, length = 1000 }
aliases = ["3mm shaft 1000", "3 mm linear shaft", "precision shaft 3 x 1000", "ground shaft 3x1000", "D3 x 1000", "Ø3 mm x 1000 mm"]
standard = "designation"

[[presets]]
id = "D4x25"
title = "Ø4 × 25 mm"
params = { diameter = 4, length = 25 }
aliases = ["4mm shaft 25", "4 mm linear shaft", "precision shaft 4 x 25", "ground shaft 4x25", "D4 x 25", "Ø4 mm x 25 mm"]
standard = "designation"

[[presets]]
id = "D4x50"
title = "Ø4 × 50 mm"
params = { diameter = 4, length = 50 }
aliases = ["4mm shaft 50", "4 mm linear shaft", "precision shaft 4 x 50", "ground shaft 4x50", "D4 x 50", "Ø4 mm x 50 mm"]
standard = "designation"

[[presets]]
id = "D4x75"
title = "Ø4 × 75 mm"
params = { diameter = 4, length = 75 }
aliases = ["4mm shaft 75", "4 mm linear shaft", "precision shaft 4 x 75", "ground shaft 4x75", "D4 x 75", "Ø4 mm x 75 mm"]
standard = "designation"

[[presets]]
id = "D4x100"
title = "Ø4 × 100 mm"
params = { diameter = 4, length = 100 }
aliases = ["4mm shaft 100", "4 mm linear shaft", "precision shaft 4 x 100", "ground shaft 4x100", "D4 x 100", "Ø4 mm x 100 mm"]
standard = "designation"

[[presets]]
id = "D4x150"
title = "Ø4 × 150 mm"
params = { diameter = 4, length = 150 }
aliases = ["4mm shaft 150", "4 mm linear shaft", "precision shaft 4 x 150", "ground shaft 4x150", "D4 x 150", "Ø4 mm x 150 mm"]
standard = "designation"

[[presets]]
id = "D4x200"
title = "Ø4 × 200 mm"
params = { diameter = 4, length = 200 }
aliases = ["4mm shaft 200", "4 mm linear shaft", "precision shaft 4 x 200", "ground shaft 4x200", "D4 x 200", "Ø4 mm x 200 mm"]
standard = "designation"

[[presets]]
id = "D4x250"
title = "Ø4 × 250 mm"
params = { diameter = 4, length = 250 }
aliases = ["4mm shaft 250", "4 mm linear shaft", "precision shaft 4 x 250", "ground shaft 4x250", "D4 x 250", "Ø4 mm x 250 mm"]
standard = "designation"

[[presets]]
id = "D4x300"
title = "Ø4 × 300 mm"
params = { diameter = 4, length = 300 }
aliases = ["4mm shaft 300", "4 mm linear shaft", "precision shaft 4 x 300", "ground shaft 4x300", "D4 x 300", "Ø4 mm x 300 mm"]
standard = "designation"

[[presets]]
id = "D4x400"
title = "Ø4 × 400 mm"
params = { diameter = 4, length = 400 }
aliases = ["4mm shaft 400", "4 mm linear shaft", "precision shaft 4 x 400", "ground shaft 4x400", "D4 x 400", "Ø4 mm x 400 mm"]
standard = "designation"

[[presets]]
id = "D4x500"
title = "Ø4 × 500 mm"
params = { diameter = 4, length = 500 }
aliases = ["4mm shaft 500", "4 mm linear shaft", "precision shaft 4 x 500", "ground shaft 4x500", "D4 x 500", "Ø4 mm x 500 mm"]
standard = "designation"

[[presets]]
id = "D4x600"
title = "Ø4 × 600 mm"
params = { diameter = 4, length = 600 }
aliases = ["4mm shaft 600", "4 mm linear shaft", "precision shaft 4 x 600", "ground shaft 4x600", "D4 x 600", "Ø4 mm x 600 mm"]
standard = "designation"

[[presets]]
id = "D4x750"
title = "Ø4 × 750 mm"
params = { diameter = 4, length = 750 }
aliases = ["4mm shaft 750", "4 mm linear shaft", "precision shaft 4 x 750", "ground shaft 4x750", "D4 x 750", "Ø4 mm x 750 mm"]
standard = "designation"

[[presets]]
id = "D4x1000"
title = "Ø4 × 1000 mm"
params = { diameter = 4, length = 1000 }
aliases = ["4mm shaft 1000", "4 mm linear shaft", "precision shaft 4 x 1000", "ground shaft 4x1000", "D4 x 1000", "Ø4 mm x 1000 mm"]
standard = "designation"

[[presets]]
id = "D5x25"
title = "Ø5 × 25 mm"
params = { diameter = 5, length = 25 }
aliases = ["5mm shaft 25", "5 mm linear shaft", "precision shaft 5 x 25", "ground shaft 5x25", "D5 x 25", "Ø5 mm x 25 mm"]
standard = "designation"

[[presets]]
id = "D5x50"
title = "Ø5 × 50 mm"
params = { diameter = 5, length = 50 }
aliases = ["5mm shaft 50", "5 mm linear shaft", "precision shaft 5 x 50", "ground shaft 5x50", "D5 x 50", "Ø5 mm x 50 mm"]
standard = "designation"

[[presets]]
id = "D5x75"
title = "Ø5 × 75 mm"
params = { diameter = 5, length = 75 }
aliases = ["5mm shaft 75", "5 mm linear shaft", "precision shaft 5 x 75", "ground shaft 5x75", "D5 x 75", "Ø5 mm x 75 mm"]
standard = "designation"

[[presets]]
id = "D5x100"
title = "Ø5 × 100 mm"
params = { diameter = 5, length = 100 }
aliases = ["5mm shaft 100", "5 mm linear shaft", "precision shaft 5 x 100", "ground shaft 5x100", "D5 x 100", "Ø5 mm x 100 mm"]
standard = "designation"

[[presets]]
id = "D5x150"
title = "Ø5 × 150 mm"
params = { diameter = 5, length = 150 }
aliases = ["5mm shaft 150", "5 mm linear shaft", "precision shaft 5 x 150", "ground shaft 5x150", "D5 x 150", "Ø5 mm x 150 mm"]
standard = "designation"

[[presets]]
id = "D5x200"
title = "Ø5 × 200 mm"
params = { diameter = 5, length = 200 }
aliases = ["5mm shaft 200", "5 mm linear shaft", "precision shaft 5 x 200", "ground shaft 5x200", "D5 x 200", "Ø5 mm x 200 mm"]
standard = "designation"

[[presets]]
id = "D5x250"
title = "Ø5 × 250 mm"
params = { diameter = 5, length = 250 }
aliases = ["5mm shaft 250", "5 mm linear shaft", "precision shaft 5 x 250", "ground shaft 5x250", "D5 x 250", "Ø5 mm x 250 mm"]
standard = "designation"

[[presets]]
id = "D5x300"
title = "Ø5 × 300 mm"
params = { diameter = 5, length = 300 }
aliases = ["5mm shaft 300", "5 mm linear shaft", "precision shaft 5 x 300", "ground shaft 5x300", "D5 x 300", "Ø5 mm x 300 mm"]
standard = "designation"

[[presets]]
id = "D5x400"
title = "Ø5 × 400 mm"
params = { diameter = 5, length = 400 }
aliases = ["5mm shaft 400", "5 mm linear shaft", "precision shaft 5 x 400", "ground shaft 5x400", "D5 x 400", "Ø5 mm x 400 mm"]
standard = "designation"

[[presets]]
id = "D5x500"
title = "Ø5 × 500 mm"
params = { diameter = 5, length = 500 }
aliases = ["5mm shaft 500", "5 mm linear shaft", "precision shaft 5 x 500", "ground shaft 5x500", "D5 x 500", "Ø5 mm x 500 mm"]
standard = "designation"

[[presets]]
id = "D5x600"
title = "Ø5 × 600 mm"
params = { diameter = 5, length = 600 }
aliases = ["5mm shaft 600", "5 mm linear shaft", "precision shaft 5 x 600", "ground shaft 5x600", "D5 x 600", "Ø5 mm x 600 mm"]
standard = "designation"

[[presets]]
id = "D5x750"
title = "Ø5 × 750 mm"
params = { diameter = 5, length = 750 }
aliases = ["5mm shaft 750", "5 mm linear shaft", "precision shaft 5 x 750", "ground shaft 5x750", "D5 x 750", "Ø5 mm x 750 mm"]
standard = "designation"

[[presets]]
id = "D5x1000"
title = "Ø5 × 1000 mm"
params = { diameter = 5, length = 1000 }
aliases = ["5mm shaft 1000", "5 mm linear shaft", "precision shaft 5 x 1000", "ground shaft 5x1000", "D5 x 1000", "Ø5 mm x 1000 mm"]
standard = "designation"

[[presets]]
id = "D6x25"
title = "Ø6 × 25 mm"
params = { diameter = 6, length = 25 }
aliases = ["6mm shaft 25", "6 mm linear shaft", "precision shaft 6 x 25", "ground shaft 6x25", "D6 x 25", "Ø6 mm x 25 mm"]
standard = "designation"

[[presets]]
id = "D6x50"
title = "Ø6 × 50 mm"
params = { diameter = 6, length = 50 }
aliases = ["6mm shaft 50", "6 mm linear shaft", "precision shaft 6 x 50", "ground shaft 6x50", "D6 x 50", "Ø6 mm x 50 mm"]
standard = "designation"

[[presets]]
id = "D6x75"
title = "Ø6 × 75 mm"
params = { diameter = 6, length = 75 }
aliases = ["6mm shaft 75", "6 mm linear shaft", "precision shaft 6 x 75", "ground shaft 6x75", "D6 x 75", "Ø6 mm x 75 mm"]
standard = "designation"

[[presets]]
id = "D6x100"
title = "Ø6 × 100 mm"
params = { diameter = 6, length = 100 }
aliases = ["6mm shaft 100", "6 mm linear shaft", "precision shaft 6 x 100", "ground shaft 6x100", "D6 x 100", "Ø6 mm x 100 mm"]
standard = "designation"

[[presets]]
id = "D6x150"
title = "Ø6 × 150 mm"
params = { diameter = 6, length = 150 }
aliases = ["6mm shaft 150", "6 mm linear shaft", "precision shaft 6 x 150", "ground shaft 6x150", "D6 x 150", "Ø6 mm x 150 mm"]
standard = "designation"

[[presets]]
id = "D6x200"
title = "Ø6 × 200 mm"
params = { diameter = 6, length = 200 }
aliases = ["6mm shaft 200", "6 mm linear shaft", "precision shaft 6 x 200", "ground shaft 6x200", "D6 x 200", "Ø6 mm x 200 mm"]
standard = "designation"

[[presets]]
id = "D6x250"
title = "Ø6 × 250 mm"
params = { diameter = 6, length = 250 }
aliases = ["6mm shaft 250", "6 mm linear shaft", "precision shaft 6 x 250", "ground shaft 6x250", "D6 x 250", "Ø6 mm x 250 mm"]
standard = "designation"

[[presets]]
id = "D6x300"
title = "Ø6 × 300 mm"
params = { diameter = 6, length = 300 }
aliases = ["6mm shaft 300", "6 mm linear shaft", "precision shaft 6 x 300", "ground shaft 6x300", "D6 x 300", "Ø6 mm x 300 mm"]
standard = "designation"

[[presets]]
id = "D6x400"
title = "Ø6 × 400 mm"
params = { diameter = 6, length = 400 }
aliases = ["6mm shaft 400", "6 mm linear shaft", "precision shaft 6 x 400", "ground shaft 6x400", "D6 x 400", "Ø6 mm x 400 mm"]
standard = "designation"

[[presets]]
id = "D6x500"
title = "Ø6 × 500 mm"
params = { diameter = 6, length = 500 }
aliases = ["6mm shaft 500", "6 mm linear shaft", "precision shaft 6 x 500", "ground shaft 6x500", "D6 x 500", "Ø6 mm x 500 mm"]
standard = "designation"

[[presets]]
id = "D6x600"
title = "Ø6 × 600 mm"
params = { diameter = 6, length = 600 }
aliases = ["6mm shaft 600", "6 mm linear shaft", "precision shaft 6 x 600", "ground shaft 6x600", "D6 x 600", "Ø6 mm x 600 mm"]
standard = "designation"

[[presets]]
id = "D6x750"
title = "Ø6 × 750 mm"
params = { diameter = 6, length = 750 }
aliases = ["6mm shaft 750", "6 mm linear shaft", "precision shaft 6 x 750", "ground shaft 6x750", "D6 x 750", "Ø6 mm x 750 mm"]
standard = "designation"

[[presets]]
id = "D6x1000"
title = "Ø6 × 1000 mm"
params = { diameter = 6, length = 1000 }
aliases = ["6mm shaft 1000", "6 mm linear shaft", "precision shaft 6 x 1000", "ground shaft 6x1000", "D6 x 1000", "Ø6 mm x 1000 mm"]
standard = "designation"

[[presets]]
id = "D8x25"
title = "Ø8 × 25 mm"
params = { diameter = 8, length = 25 }
aliases = ["8mm shaft 25", "8 mm linear shaft", "precision shaft 8 x 25", "ground shaft 8x25", "D8 x 25", "Ø8 mm x 25 mm"]
standard = "designation"

[[presets]]
id = "D8x50"
title = "Ø8 × 50 mm"
params = { diameter = 8, length = 50 }
aliases = ["8mm shaft 50", "8 mm linear shaft", "precision shaft 8 x 50", "ground shaft 8x50", "D8 x 50", "Ø8 mm x 50 mm"]
standard = "designation"

[[presets]]
id = "D8x75"
title = "Ø8 × 75 mm"
params = { diameter = 8, length = 75 }
aliases = ["8mm shaft 75", "8 mm linear shaft", "precision shaft 8 x 75", "ground shaft 8x75", "D8 x 75", "Ø8 mm x 75 mm"]
standard = "designation"

[[presets]]
id = "D8x100"
title = "Ø8 × 100 mm"
params = { diameter = 8, length = 100 }
aliases = ["8mm shaft 100", "8 mm linear shaft", "precision shaft 8 x 100", "ground shaft 8x100", "D8 x 100", "Ø8 mm x 100 mm"]
standard = "designation"

[[presets]]
id = "D8x150"
title = "Ø8 × 150 mm"
params = { diameter = 8, length = 150 }
aliases = ["8mm shaft 150", "8 mm linear shaft", "precision shaft 8 x 150", "ground shaft 8x150", "D8 x 150", "Ø8 mm x 150 mm"]
standard = "designation"

[[presets]]
id = "D8x200"
title = "Ø8 × 200 mm"
params = { diameter = 8, length = 200 }
aliases = ["8mm shaft 200", "8 mm linear shaft", "precision shaft 8 x 200", "ground shaft 8x200", "D8 x 200", "Ø8 mm x 200 mm"]
standard = "designation"

[[presets]]
id = "D8x250"
title = "Ø8 × 250 mm"
params = { diameter = 8, length = 250 }
aliases = ["8mm shaft 250", "8 mm linear shaft", "precision shaft 8 x 250", "ground shaft 8x250", "D8 x 250", "Ø8 mm x 250 mm"]
standard = "designation"

[[presets]]
id = "D8x300"
title = "Ø8 × 300 mm"
params = { diameter = 8, length = 300 }
aliases = ["8mm shaft 300", "8 mm linear shaft", "precision shaft 8 x 300", "ground shaft 8x300", "D8 x 300", "Ø8 mm x 300 mm"]
standard = "designation"

[[presets]]
id = "D8x400"
title = "Ø8 × 400 mm"
params = { diameter = 8, length = 400 }
aliases = ["8mm shaft 400", "8 mm linear shaft", "precision shaft 8 x 400", "ground shaft 8x400", "D8 x 400", "Ø8 mm x 400 mm"]
standard = "designation"

[[presets]]
id = "D8x500"
title = "Ø8 × 500 mm"
params = { diameter = 8, length = 500 }
aliases = ["8mm shaft 500", "8 mm linear shaft", "precision shaft 8 x 500", "ground shaft 8x500", "D8 x 500", "Ø8 mm x 500 mm"]
standard = "designation"

[[presets]]
id = "D8x600"
title = "Ø8 × 600 mm"
params = { diameter = 8, length = 600 }
aliases = ["8mm shaft 600", "8 mm linear shaft", "precision shaft 8 x 600", "ground shaft 8x600", "D8 x 600", "Ø8 mm x 600 mm"]
standard = "designation"

[[presets]]
id = "D8x750"
title = "Ø8 × 750 mm"
params = { diameter = 8, length = 750 }
aliases = ["8mm shaft 750", "8 mm linear shaft", "precision shaft 8 x 750", "ground shaft 8x750", "D8 x 750", "Ø8 mm x 750 mm"]
standard = "designation"

[[presets]]
id = "D8x1000"
title = "Ø8 × 1000 mm"
params = { diameter = 8, length = 1000 }
aliases = ["8mm shaft 1000", "8 mm linear shaft", "precision shaft 8 x 1000", "ground shaft 8x1000", "D8 x 1000", "Ø8 mm x 1000 mm"]
standard = "designation"

[[presets]]
id = "D10x25"
title = "Ø10 × 25 mm"
params = { diameter = 10, length = 25 }
aliases = ["10mm shaft 25", "10 mm linear shaft", "precision shaft 10 x 25", "ground shaft 10x25", "D10 x 25", "Ø10 mm x 25 mm"]
standard = "designation"

[[presets]]
id = "D10x50"
title = "Ø10 × 50 mm"
params = { diameter = 10, length = 50 }
aliases = ["10mm shaft 50", "10 mm linear shaft", "precision shaft 10 x 50", "ground shaft 10x50", "D10 x 50", "Ø10 mm x 50 mm"]
standard = "designation"

[[presets]]
id = "D10x75"
title = "Ø10 × 75 mm"
params = { diameter = 10, length = 75 }
aliases = ["10mm shaft 75", "10 mm linear shaft", "precision shaft 10 x 75", "ground shaft 10x75", "D10 x 75", "Ø10 mm x 75 mm"]
standard = "designation"

[[presets]]
id = "D10x100"
title = "Ø10 × 100 mm"
params = { diameter = 10, length = 100 }
aliases = ["10mm shaft 100", "10 mm linear shaft", "precision shaft 10 x 100", "ground shaft 10x100", "D10 x 100", "Ø10 mm x 100 mm"]
standard = "designation"

[[presets]]
id = "D10x150"
title = "Ø10 × 150 mm"
params = { diameter = 10, length = 150 }
aliases = ["10mm shaft 150", "10 mm linear shaft", "precision shaft 10 x 150", "ground shaft 10x150", "D10 x 150", "Ø10 mm x 150 mm"]
standard = "designation"

[[presets]]
id = "D10x200"
title = "Ø10 × 200 mm"
params = { diameter = 10, length = 200 }
aliases = ["10mm shaft 200", "10 mm linear shaft", "precision shaft 10 x 200", "ground shaft 10x200", "D10 x 200", "Ø10 mm x 200 mm"]
standard = "designation"

[[presets]]
id = "D10x250"
title = "Ø10 × 250 mm"
params = { diameter = 10, length = 250 }
aliases = ["10mm shaft 250", "10 mm linear shaft", "precision shaft 10 x 250", "ground shaft 10x250", "D10 x 250", "Ø10 mm x 250 mm"]
standard = "designation"

[[presets]]
id = "D10x300"
title = "Ø10 × 300 mm"
params = { diameter = 10, length = 300 }
aliases = ["10mm shaft 300", "10 mm linear shaft", "precision shaft 10 x 300", "ground shaft 10x300", "D10 x 300", "Ø10 mm x 300 mm"]
standard = "designation"

[[presets]]
id = "D10x400"
title = "Ø10 × 400 mm"
params = { diameter = 10, length = 400 }
aliases = ["10mm shaft 400", "10 mm linear shaft", "precision shaft 10 x 400", "ground shaft 10x400", "D10 x 400", "Ø10 mm x 400 mm"]
standard = "designation"

[[presets]]
id = "D10x500"
title = "Ø10 × 500 mm"
params = { diameter = 10, length = 500 }
aliases = ["10mm shaft 500", "10 mm linear shaft", "precision shaft 10 x 500", "ground shaft 10x500", "D10 x 500", "Ø10 mm x 500 mm"]
standard = "designation"

[[presets]]
id = "D10x600"
title = "Ø10 × 600 mm"
params = { diameter = 10, length = 600 }
aliases = ["10mm shaft 600", "10 mm linear shaft", "precision shaft 10 x 600", "ground shaft 10x600", "D10 x 600", "Ø10 mm x 600 mm"]
standard = "designation"

[[presets]]
id = "D10x750"
title = "Ø10 × 750 mm"
params = { diameter = 10, length = 750 }
aliases = ["10mm shaft 750", "10 mm linear shaft", "precision shaft 10 x 750", "ground shaft 10x750", "D10 x 750", "Ø10 mm x 750 mm"]
standard = "designation"

[[presets]]
id = "D10x1000"
title = "Ø10 × 1000 mm"
params = { diameter = 10, length = 1000 }
aliases = ["10mm shaft 1000", "10 mm linear shaft", "precision shaft 10 x 1000", "ground shaft 10x1000", "D10 x 1000", "Ø10 mm x 1000 mm"]
standard = "designation"

[[presets]]
id = "D12x25"
title = "Ø12 × 25 mm"
params = { diameter = 12, length = 25 }
aliases = ["12mm shaft 25", "12 mm linear shaft", "precision shaft 12 x 25", "ground shaft 12x25", "D12 x 25", "Ø12 mm x 25 mm"]
standard = "designation"

[[presets]]
id = "D12x50"
title = "Ø12 × 50 mm"
params = { diameter = 12, length = 50 }
aliases = ["12mm shaft 50", "12 mm linear shaft", "precision shaft 12 x 50", "ground shaft 12x50", "D12 x 50", "Ø12 mm x 50 mm"]
standard = "designation"

[[presets]]
id = "D12x75"
title = "Ø12 × 75 mm"
params = { diameter = 12, length = 75 }
aliases = ["12mm shaft 75", "12 mm linear shaft", "precision shaft 12 x 75", "ground shaft 12x75", "D12 x 75", "Ø12 mm x 75 mm"]
standard = "designation"

[[presets]]
id = "D12x100"
title = "Ø12 × 100 mm"
params = { diameter = 12, length = 100 }
aliases = ["12mm shaft 100", "12 mm linear shaft", "precision shaft 12 x 100", "ground shaft 12x100", "D12 x 100", "Ø12 mm x 100 mm"]
standard = "designation"

[[presets]]
id = "D12x150"
title = "Ø12 × 150 mm"
params = { diameter = 12, length = 150 }
aliases = ["12mm shaft 150", "12 mm linear shaft", "precision shaft 12 x 150", "ground shaft 12x150", "D12 x 150", "Ø12 mm x 150 mm"]
standard = "designation"

[[presets]]
id = "D12x200"
title = "Ø12 × 200 mm"
params = { diameter = 12, length = 200 }
aliases = ["12mm shaft 200", "12 mm linear shaft", "precision shaft 12 x 200", "ground shaft 12x200", "D12 x 200", "Ø12 mm x 200 mm"]
standard = "designation"

[[presets]]
id = "D12x250"
title = "Ø12 × 250 mm"
params = { diameter = 12, length = 250 }
aliases = ["12mm shaft 250", "12 mm linear shaft", "precision shaft 12 x 250", "ground shaft 12x250", "D12 x 250", "Ø12 mm x 250 mm"]
standard = "designation"

[[presets]]
id = "D12x300"
title = "Ø12 × 300 mm"
params = { diameter = 12, length = 300 }
aliases = ["12mm shaft 300", "12 mm linear shaft", "precision shaft 12 x 300", "ground shaft 12x300", "D12 x 300", "Ø12 mm x 300 mm"]
standard = "designation"

[[presets]]
id = "D12x400"
title = "Ø12 × 400 mm"
params = { diameter = 12, length = 400 }
aliases = ["12mm shaft 400", "12 mm linear shaft", "precision shaft 12 x 400", "ground shaft 12x400", "D12 x 400", "Ø12 mm x 400 mm"]
standard = "designation"

[[presets]]
id = "D12x500"
title = "Ø12 × 500 mm"
params = { diameter = 12, length = 500 }
aliases = ["12mm shaft 500", "12 mm linear shaft", "precision shaft 12 x 500", "ground shaft 12x500", "D12 x 500", "Ø12 mm x 500 mm"]
standard = "designation"

[[presets]]
id = "D12x600"
title = "Ø12 × 600 mm"
params = { diameter = 12, length = 600 }
aliases = ["12mm shaft 600", "12 mm linear shaft", "precision shaft 12 x 600", "ground shaft 12x600", "D12 x 600", "Ø12 mm x 600 mm"]
standard = "designation"

[[presets]]
id = "D12x750"
title = "Ø12 × 750 mm"
params = { diameter = 12, length = 750 }
aliases = ["12mm shaft 750", "12 mm linear shaft", "precision shaft 12 x 750", "ground shaft 12x750", "D12 x 750", "Ø12 mm x 750 mm"]
standard = "designation"

[[presets]]
id = "D12x1000"
title = "Ø12 × 1000 mm"
params = { diameter = 12, length = 1000 }
aliases = ["12mm shaft 1000", "12 mm linear shaft", "precision shaft 12 x 1000", "ground shaft 12x1000", "D12 x 1000", "Ø12 mm x 1000 mm"]
standard = "designation"

[[presets]]
id = "D16x25"
title = "Ø16 × 25 mm"
params = { diameter = 16, length = 25 }
aliases = ["16mm shaft 25", "16 mm linear shaft", "precision shaft 16 x 25", "ground shaft 16x25", "D16 x 25", "Ø16 mm x 25 mm"]
standard = "designation"

[[presets]]
id = "D16x50"
title = "Ø16 × 50 mm"
params = { diameter = 16, length = 50 }
aliases = ["16mm shaft 50", "16 mm linear shaft", "precision shaft 16 x 50", "ground shaft 16x50", "D16 x 50", "Ø16 mm x 50 mm"]
standard = "designation"

[[presets]]
id = "D16x75"
title = "Ø16 × 75 mm"
params = { diameter = 16, length = 75 }
aliases = ["16mm shaft 75", "16 mm linear shaft", "precision shaft 16 x 75", "ground shaft 16x75", "D16 x 75", "Ø16 mm x 75 mm"]
standard = "designation"

[[presets]]
id = "D16x100"
title = "Ø16 × 100 mm"
params = { diameter = 16, length = 100 }
aliases = ["16mm shaft 100", "16 mm linear shaft", "precision shaft 16 x 100", "ground shaft 16x100", "D16 x 100", "Ø16 mm x 100 mm"]
standard = "designation"

[[presets]]
id = "D16x150"
title = "Ø16 × 150 mm"
params = { diameter = 16, length = 150 }
aliases = ["16mm shaft 150", "16 mm linear shaft", "precision shaft 16 x 150", "ground shaft 16x150", "D16 x 150", "Ø16 mm x 150 mm"]
standard = "designation"

[[presets]]
id = "D16x200"
title = "Ø16 × 200 mm"
params = { diameter = 16, length = 200 }
aliases = ["16mm shaft 200", "16 mm linear shaft", "precision shaft 16 x 200", "ground shaft 16x200", "D16 x 200", "Ø16 mm x 200 mm"]
standard = "designation"

[[presets]]
id = "D16x250"
title = "Ø16 × 250 mm"
params = { diameter = 16, length = 250 }
aliases = ["16mm shaft 250", "16 mm linear shaft", "precision shaft 16 x 250", "ground shaft 16x250", "D16 x 250", "Ø16 mm x 250 mm"]
standard = "designation"

[[presets]]
id = "D16x300"
title = "Ø16 × 300 mm"
params = { diameter = 16, length = 300 }
aliases = ["16mm shaft 300", "16 mm linear shaft", "precision shaft 16 x 300", "ground shaft 16x300", "D16 x 300", "Ø16 mm x 300 mm"]
standard = "designation"

[[presets]]
id = "D16x400"
title = "Ø16 × 400 mm"
params = { diameter = 16, length = 400 }
aliases = ["16mm shaft 400", "16 mm linear shaft", "precision shaft 16 x 400", "ground shaft 16x400", "D16 x 400", "Ø16 mm x 400 mm"]
standard = "designation"

[[presets]]
id = "D16x500"
title = "Ø16 × 500 mm"
params = { diameter = 16, length = 500 }
aliases = ["16mm shaft 500", "16 mm linear shaft", "precision shaft 16 x 500", "ground shaft 16x500", "D16 x 500", "Ø16 mm x 500 mm"]
standard = "designation"

[[presets]]
id = "D16x600"
title = "Ø16 × 600 mm"
params = { diameter = 16, length = 600 }
aliases = ["16mm shaft 600", "16 mm linear shaft", "precision shaft 16 x 600", "ground shaft 16x600", "D16 x 600", "Ø16 mm x 600 mm"]
standard = "designation"

[[presets]]
id = "D16x750"
title = "Ø16 × 750 mm"
params = { diameter = 16, length = 750 }
aliases = ["16mm shaft 750", "16 mm linear shaft", "precision shaft 16 x 750", "ground shaft 16x750", "D16 x 750", "Ø16 mm x 750 mm"]
standard = "designation"

[[presets]]
id = "D16x1000"
title = "Ø16 × 1000 mm"
params = { diameter = 16, length = 1000 }
aliases = ["16mm shaft 1000", "16 mm linear shaft", "precision shaft 16 x 1000", "ground shaft 16x1000", "D16 x 1000", "Ø16 mm x 1000 mm"]
standard = "designation"

[[presets]]
id = "D20x25"
title = "Ø20 × 25 mm"
params = { diameter = 20, length = 25 }
aliases = ["20mm shaft 25", "20 mm linear shaft", "precision shaft 20 x 25", "ground shaft 20x25", "D20 x 25", "Ø20 mm x 25 mm"]
standard = "designation"

[[presets]]
id = "D20x50"
title = "Ø20 × 50 mm"
params = { diameter = 20, length = 50 }
aliases = ["20mm shaft 50", "20 mm linear shaft", "precision shaft 20 x 50", "ground shaft 20x50", "D20 x 50", "Ø20 mm x 50 mm"]
standard = "designation"

[[presets]]
id = "D20x75"
title = "Ø20 × 75 mm"
params = { diameter = 20, length = 75 }
aliases = ["20mm shaft 75", "20 mm linear shaft", "precision shaft 20 x 75", "ground shaft 20x75", "D20 x 75", "Ø20 mm x 75 mm"]
standard = "designation"

[[presets]]
id = "D20x100"
title = "Ø20 × 100 mm"
params = { diameter = 20, length = 100 }
aliases = ["20mm shaft 100", "20 mm linear shaft", "precision shaft 20 x 100", "ground shaft 20x100", "D20 x 100", "Ø20 mm x 100 mm"]
standard = "designation"

[[presets]]
id = "D20x150"
title = "Ø20 × 150 mm"
params = { diameter = 20, length = 150 }
aliases = ["20mm shaft 150", "20 mm linear shaft", "precision shaft 20 x 150", "ground shaft 20x150", "D20 x 150", "Ø20 mm x 150 mm"]
standard = "designation"

[[presets]]
id = "D20x200"
title = "Ø20 × 200 mm"
params = { diameter = 20, length = 200 }
aliases = ["20mm shaft 200", "20 mm linear shaft", "precision shaft 20 x 200", "ground shaft 20x200", "D20 x 200", "Ø20 mm x 200 mm"]
standard = "designation"

[[presets]]
id = "D20x250"
title = "Ø20 × 250 mm"
params = { diameter = 20, length = 250 }
aliases = ["20mm shaft 250", "20 mm linear shaft", "precision shaft 20 x 250", "ground shaft 20x250", "D20 x 250", "Ø20 mm x 250 mm"]
standard = "designation"

[[presets]]
id = "D20x300"
title = "Ø20 × 300 mm"
params = { diameter = 20, length = 300 }
aliases = ["20mm shaft 300", "20 mm linear shaft", "precision shaft 20 x 300", "ground shaft 20x300", "D20 x 300", "Ø20 mm x 300 mm"]
standard = "designation"

[[presets]]
id = "D20x400"
title = "Ø20 × 400 mm"
params = { diameter = 20, length = 400 }
aliases = ["20mm shaft 400", "20 mm linear shaft", "precision shaft 20 x 400", "ground shaft 20x400", "D20 x 400", "Ø20 mm x 400 mm"]
standard = "designation"

[[presets]]
id = "D20x500"
title = "Ø20 × 500 mm"
params = { diameter = 20, length = 500 }
aliases = ["20mm shaft 500", "20 mm linear shaft", "precision shaft 20 x 500", "ground shaft 20x500", "D20 x 500", "Ø20 mm x 500 mm"]
standard = "designation"

[[presets]]
id = "D20x600"
title = "Ø20 × 600 mm"
params = { diameter = 20, length = 600 }
aliases = ["20mm shaft 600", "20 mm linear shaft", "precision shaft 20 x 600", "ground shaft 20x600", "D20 x 600", "Ø20 mm x 600 mm"]
standard = "designation"

[[presets]]
id = "D20x750"
title = "Ø20 × 750 mm"
params = { diameter = 20, length = 750 }
aliases = ["20mm shaft 750", "20 mm linear shaft", "precision shaft 20 x 750", "ground shaft 20x750", "D20 x 750", "Ø20 mm x 750 mm"]
standard = "designation"

[[presets]]
id = "D20x1000"
title = "Ø20 × 1000 mm"
params = { diameter = 20, length = 1000 }
aliases = ["20mm shaft 1000", "20 mm linear shaft", "precision shaft 20 x 1000", "ground shaft 20x1000", "D20 x 1000", "Ø20 mm x 1000 mm"]
standard = "designation"