# Presets of this part (factory/PRESETS.md). Written by factory/gen.py.

[[presets]]
id = "snap-in-M2-5"
title = "Snap-in PCB support M2, 5 mm (simplified)"
params = { kind = "snap-in", size = "M2", height = 5 }
aliases = ["snap-in PCB spacer M2 5 mm", "PCB standoff M2 x 5", "board support M2 5 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "snap-in-M2-6"
title = "Snap-in PCB support M2, 6 mm (simplified)"
params = { kind = "snap-in", size = "M2", height = 6 }
aliases = ["snap-in PCB spacer M2 6 mm", "PCB standoff M2 x 6", "board support M2 6 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "snap-in-M2-8"
title = "Snap-in PCB support M2, 8 mm (simplified)"
params = { kind = "snap-in", size = "M2", height = 8 }
aliases = ["snap-in PCB spacer M2 8 mm", "PCB standoff M2 x 8", "board support M2 8 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "snap-in-M2-10"
title = "Snap-in PCB support M2, 10 mm (simplified)"
params = { kind = "snap-in", size = "M2", height = 10 }
aliases = ["snap-in PCB spacer M2 10 mm", "PCB standoff M2 x 10", "board support M2 10 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "snap-in-M2-12"
title = "Snap-in PCB support M2, 12 mm (simplified)"
params = { kind = "snap-in", size = "M2", height = 12 }
aliases = ["snap-in PCB spacer M2 12 mm", "PCB standoff M2 x 12", "board support M2 12 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "snap-in-M2-15"
title = "Snap-in PCB support M2, 15 mm (simplified)"
params = { kind = "snap-in", size = "M2", height = 15 }
aliases = ["snap-in PCB spacer M2 15 mm", "PCB standoff M2 x 15", "board support M2 15 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "snap-in-M2-20"
title = "Snap-in PCB support M2, 20 mm (simplified)"
params = { kind = "snap-in", size = "M2", height = 20 }
aliases = ["snap-in PCB spacer M2 20 mm", "PCB standoff M2 x 20", "board support M2 20 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "snap-in-M2-25"
title = "Snap-in PCB support M2, 25 mm (simplified)"
params = { kind = "snap-in", size = "M2", height = 25 }
aliases = ["snap-in PCB spacer M2 25 mm", "PCB standoff M2 x 25", "board support M2 25 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "snap-in-M2.5-5"
title = "Snap-in PCB support M2.5, 5 mm (simplified)"
params = { kind = "snap-in", size = "M2.5", height = 5 }
aliases = ["snap-in PCB spacer M2.5 5 mm", "PCB standoff M2.5 x 5", "board support M2.5 5 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "snap-in-M2.5-6"
title = "Snap-in PCB support M2.5, 6 mm (simplified)"
params = { kind = "snap-in", size = "M2.5", height = 6 }
aliases = ["snap-in PCB spacer M2.5 6 mm", "PCB standoff M2.5 x 6", "board support M2.5 6 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "snap-in-M2.5-8"
title = "Snap-in PCB support M2.5, 8 mm (simplified)"
params = { kind = "snap-in", size = "M2.5", height = 8 }
aliases = ["snap-in PCB spacer M2.5 8 mm", "PCB standoff M2.5 x 8", "board support M2.5 8 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "snap-in-M2.5-10"
title = "Snap-in PCB support M2.5, 10 mm (simplified)"
params = { kind = "snap-in", size = "M2.5", height = 10 }
aliases = ["snap-in PCB spacer M2.5 10 mm", "PCB standoff M2.5 x 10", "board support M2.5 10 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "snap-in-M2.5-12"
title = "Snap-in PCB support M2.5, 12 mm (simplified)"
params = { kind = "snap-in", size = "M2.5", height = 12 }
aliases = ["snap-in PCB spacer M2.5 12 mm", "PCB standoff M2.5 x 12", "board support M2.5 12 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "snap-in-M2.5-15"
title = "Snap-in PCB support M2.5, 15 mm (simplified)"
params = { kind = "snap-in", size = "M2.5", height = 15 }
aliases = ["snap-in PCB spacer M2.5 15 mm", "PCB standoff M2.5 x 15", "board support M2.5 15 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "snap-in-M2.5-20"
title = "Snap-in PCB support M2.5, 20 mm (simplified)"
params = { kind = "snap-in", size = "M2.5", height = 20 }
aliases = ["snap-in PCB spacer M2.5 20 mm", "PCB standoff M2.5 x 20", "board support M2.5 20 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "snap-in-M2.5-25"
title = "Snap-in PCB support M2.5, 25 mm (simplified)"
params = { kind = "snap-in", size = "M2.5", height = 25 }
aliases = ["snap-in PCB spacer M2.5 25 mm", "PCB standoff M2.5 x 25", "board support M2.5 25 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "snap-in-M3-5"
title = "Snap-in PCB support M3, 5 mm (simplified)"
params = { kind = "snap-in", size = "M3", height = 5 }
aliases = ["snap-in PCB spacer M3 5 mm", "PCB standoff M3 x 5", "board support M3 5 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "snap-in-M3-6"
title = "Snap-in PCB support M3, 6 mm (simplified)"
params = { kind = "snap-in", size = "M3", height = 6 }
aliases = ["snap-in PCB spacer M3 6 mm", "PCB standoff M3 x 6", "board support M3 6 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "snap-in-M3-8"
title = "Snap-in PCB support M3, 8 mm (simplified)"
params = { kind = "snap-in", size = "M3", height = 8 }
aliases = ["snap-in PCB spacer M3 8 mm", "PCB standoff M3 x 8", "board support M3 8 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "snap-in-M3-10"
title = "Snap-in PCB support M3, 10 mm (simplified)"
params = { kind = "snap-in", size = "M3", height = 10 }
aliases = ["snap-in PCB spacer M3 10 mm", "PCB standoff M3 x 10", "board support M3 10 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "snap-in-M3-12"
title = "Snap-in PCB support M3, 12 mm (simplified)"
params = { kind = "snap-in", size = "M3", height = 12 }
aliases = ["snap-in PCB spacer M3 12 mm", "PCB standoff M3 x 12", "board support M3 12 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "snap-in-M3-15"
title = "Snap-in PCB support M3, 15 mm (simplified)"
params = { kind = "snap-in", size = "M3", height = 15 }
aliases = ["snap-in PCB spacer M3 15 mm", "PCB standoff M3 x 15", "board support M3 15 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "snap-in-M3-20"
title = "Snap-in PCB support M3, 20 mm (simplified)"
params = { kind = "snap-in", size = "M3", height = 20 }
aliases = ["snap-in PCB spacer M3 20 mm", "PCB standoff M3 x 20", "board support M3 20 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "snap-in-M3-25"
title = "Snap-in PCB support M3, 25 mm (simplified)"
params = { kind = "snap-in", size = "M3", height = 25 }
aliases = ["snap-in PCB spacer M3 25 mm", "PCB standoff M3 x 25", "board support M3 25 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "snap-in-M4-5"
title = "Snap-in PCB support M4, 5 mm (simplified)"
params = { kind = "snap-in", size = "M4", height = 5 }
aliases = ["snap-in PCB spacer M4 5 mm", "PCB standoff M4 x 5", "board support M4 5 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "snap-in-M4-6"
title = "Snap-in PCB support M4, 6 mm (simplified)"
params = { kind = "snap-in", size = "M4", height = 6 }
aliases = ["snap-in PCB spacer M4 6 mm", "PCB standoff M4 x 6", "board support M4 6 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "snap-in-M4-8"
title = "Snap-in PCB support M4, 8 mm (simplified)"
params = { kind = "snap-in", size = "M4", height = 8 }
aliases = ["snap-in PCB spacer M4 8 mm", "PCB standoff M4 x 8", "board support M4 8 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "snap-in-M4-10"
title = "Snap-in PCB support M4, 10 mm (simplified)"
params = { kind = "snap-in", size = "M4", height = 10 }
aliases = ["snap-in PCB spacer M4 10 mm", "PCB standoff M4 x 10", "board support M4 10 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "snap-in-M4-12"
title = "Snap-in PCB support M4, 12 mm (simplified)"
params = { kind = "snap-in", size = "M4", height = 12 }
aliases = ["snap-in PCB spacer M4 12 mm", "PCB standoff M4 x 12", "board support M4 12 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "snap-in-M4-15"
title = "Snap-in PCB support M4, 15 mm (simplified)"
params = { kind = "snap-in", size = "M4", height = 15 }
aliases = ["snap-in PCB spacer M4 15 mm", "PCB standoff M4 x 15", "board support M4 15 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "snap-in-M4-20"
title = "Snap-in PCB support M4, 20 mm (simplified)"
params = { kind = "snap-in", size = "M4", height = 20 }
aliases = ["snap-in PCB spacer M4 20 mm", "PCB standoff M4 x 20", "board support M4 20 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "snap-in-M4-25"
title = "Snap-in PCB support M4, 25 mm (simplified)"
params = { kind = "snap-in", size = "M4", height = 25 }
aliases = ["snap-in PCB spacer M4 25 mm", "PCB standoff M4 x 25", "board support M4 25 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "adhesive-M2-5"
title = "Adhesive-backed PCB support M2, 5 mm (simplified)"
params = { kind = "adhesive", size = "M2", height = 5 }
aliases = ["adhesive PCB spacer M2 5 mm", "PCB standoff M2 x 5", "board support M2 5 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "adhesive-M2-6"
title = "Adhesive-backed PCB support M2, 6 mm (simplified)"
params = { kind = "adhesive", size = "M2", height = 6 }
aliases = ["adhesive PCB spacer M2 6 mm", "PCB standoff M2 x 6", "board support M2 6 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "adhesive-M2-8"
title = "Adhesive-backed PCB support M2, 8 mm (simplified)"
params = { kind = "adhesive", size = "M2", height = 8 }
aliases = ["adhesive PCB spacer M2 8 mm", "PCB standoff M2 x 8", "board support M2 8 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "adhesive-M2-10"
title = "Adhesive-backed PCB support M2, 10 mm (simplified)"
params = { kind = "adhesive", size = "M2", height = 10 }
aliases = ["adhesive PCB spacer M2 10 mm", "PCB standoff M2 x 10", "board support M2 10 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "adhesive-M2-12"
title = "Adhesive-backed PCB support M2, 12 mm (simplified)"
params = { kind = "adhesive", size = "M2", height = 12 }
aliases = ["adhesive PCB spacer M2 12 mm", "PCB standoff M2 x 12", "board support M2 12 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "adhesive-M2-15"
title = "Adhesive-backed PCB support M2, 15 mm (simplified)"
params = { kind = "adhesive", size = "M2", height = 15 }
aliases = ["adhesive PCB spacer M2 15 mm", "PCB standoff M2 x 15", "board support M2 15 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "adhesive-M2-20"
title = "Adhesive-backed PCB support M2, 20 mm (simplified)"
params = { kind = "adhesive", size = "M2", height = 20 }
aliases = ["adhesive PCB spacer M2 20 mm", "PCB standoff M2 x 20", "board support M2 20 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "adhesive-M2-25"
title = "Adhesive-backed PCB support M2, 25 mm (simplified)"
params = { kind = "adhesive", size = "M2", height = 25 }
aliases = ["adhesive PCB spacer M2 25 mm", "PCB standoff M2 x 25", "board support M2 25 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "adhesive-M2.5-5"
title = "Adhesive-backed PCB support M2.5, 5 mm (simplified)"
params = { kind = "adhesive", size = "M2.5", height = 5 }
aliases = ["adhesive PCB spacer M2.5 5 mm", "PCB standoff M2.5 x 5", "board support M2.5 5 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "adhesive-M2.5-6"
title = "Adhesive-backed PCB support M2.5, 6 mm (simplified)"
params = { kind = "adhesive", size = "M2.5", height = 6 }
aliases = ["adhesive PCB spacer M2.5 6 mm", "PCB standoff M2.5 x 6", "board support M2.5 6 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "adhesive-M2.5-8"
title = "Adhesive-backed PCB support M2.5, 8 mm (simplified)"
params = { kind = "adhesive", size = "M2.5", height = 8 }
aliases = ["adhesive PCB spacer M2.5 8 mm", "PCB standoff M2.5 x 8", "board support M2.5 8 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "adhesive-M2.5-10"
title = "Adhesive-backed PCB support M2.5, 10 mm (simplified)"
params = { kind = "adhesive", size = "M2.5", height = 10 }
aliases = ["adhesive PCB spacer M2.5 10 mm", "PCB standoff M2.5 x 10", "board support M2.5 10 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "adhesive-M2.5-12"
title = "Adhesive-backed PCB support M2.5, 12 mm (simplified)"
params = { kind = "adhesive", size = "M2.5", height = 12 }
aliases = ["adhesive PCB spacer M2.5 12 mm", "PCB standoff M2.5 x 12", "board support M2.5 12 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "adhesive-M2.5-15"
title = "Adhesive-backed PCB support M2.5, 15 mm (simplified)"
params = { kind = "adhesive", size = "M2.5", height = 15 }
aliases = ["adhesive PCB spacer M2.5 15 mm", "PCB standoff M2.5 x 15", "board support M2.5 15 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "adhesive-M2.5-20"
title = "Adhesive-backed PCB support M2.5, 20 mm (simplified)"
params = { kind = "adhesive", size = "M2.5", height = 20 }
aliases = ["adhesive PCB spacer M2.5 20 mm", "PCB standoff M2.5 x 20", "board support M2.5 20 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "adhesive-M2.5-25"
title = "Adhesive-backed PCB support M2.5, 25 mm (simplified)"
params = { kind = "adhesive", size = "M2.5", height = 25 }
aliases = ["adhesive PCB spacer M2.5 25 mm", "PCB standoff M2.5 x 25", "board support M2.5 25 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "adhesive-M3-5"
title = "Adhesive-backed PCB support M3, 5 mm (simplified)"
params = { kind = "adhesive", size = "M3", height = 5 }
aliases = ["adhesive PCB spacer M3 5 mm", "PCB standoff M3 x 5", "board support M3 5 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "adhesive-M3-6"
title = "Adhesive-backed PCB support M3, 6 mm (simplified)"
params = { kind = "adhesive", size = "M3", height = 6 }
aliases = ["adhesive PCB spacer M3 6 mm", "PCB standoff M3 x 6", "board support M3 6 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "adhesive-M3-8"
title = "Adhesive-backed PCB support M3, 8 mm (simplified)"
params = { kind = "adhesive", size = "M3", height = 8 }
aliases = ["adhesive PCB spacer M3 8 mm", "PCB standoff M3 x 8", "board support M3 8 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "adhesive-M3-10"
title = "Adhesive-backed PCB support M3, 10 mm (simplified)"
params = { kind = "adhesive", size = "M3", height = 10 }
aliases = ["adhesive PCB spacer M3 10 mm", "PCB standoff M3 x 10", "board support M3 10 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "adhesive-M3-12"
title = "Adhesive-backed PCB support M3, 12 mm (simplified)"
params = { kind = "adhesive", size = "M3", height = 12 }
aliases = ["adhesive PCB spacer M3 12 mm", "PCB standoff M3 x 12", "board support M3 12 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "adhesive-M3-15"
title = "Adhesive-backed PCB support M3, 15 mm (simplified)"
params = { kind = "adhesive", size = "M3", height = 15 }
aliases = ["adhesive PCB spacer M3 15 mm", "PCB standoff M3 x 15", "board support M3 15 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "adhesive-M3-20"
title = "Adhesive-backed PCB support M3, 20 mm (simplified)"
params = { kind = "adhesive", size = "M3", height = 20 }
aliases = ["adhesive PCB spacer M3 20 mm", "PCB standoff M3 x 20", "board support M3 20 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "adhesive-M3-25"
title = "Adhesive-backed PCB support M3, 25 mm (simplified)"
params = { kind = "adhesive", size = "M3", height = 25 }
aliases = ["adhesive PCB spacer M3 25 mm", "PCB standoff M3 x 25", "board support M3 25 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "adhesive-M4-5"
title = "Adhesive-backed PCB support M4, 5 mm (simplified)"
params = { kind = "adhesive", size = "M4", height = 5 }
aliases = ["adhesive PCB spacer M4 5 mm", "PCB standoff M4 x 5", "board support M4 5 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "adhesive-M4-6"
title = "Adhesive-backed PCB support M4, 6 mm (simplified)"
params = { kind = "adhesive", size = "M4", height = 6 }
aliases = ["adhesive PCB spacer M4 6 mm", "PCB standoff M4 x 6", "board support M4 6 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "adhesive-M4-8"
title = "Adhesive-backed PCB support M4, 8 mm (simplified)"
params = { kind = "adhesive", size = "M4", height = 8 }
aliases = ["adhesive PCB spacer M4 8 mm", "PCB standoff M4 x 8", "board support M4 8 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "adhesive-M4-10"
title = "Adhesive-backed PCB support M4, 10 mm (simplified)"
params = { kind = "adhesive", size = "M4", height = 10 }
aliases = ["adhesive PCB spacer M4 10 mm", "PCB standoff M4 x 10", "board support M4 10 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "adhesive-M4-12"
title = "Adhesive-backed PCB support M4, 12 mm (simplified)"
params = { kind = "adhesive", size = "M4", height = 12 }
aliases = ["adhesive PCB spacer M4 12 mm", "PCB standoff M4 x 12", "board support M4 12 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "adhesive-M4-15"
title = "Adhesive-backed PCB support M4, 15 mm (simplified)"
params = { kind = "adhesive", size = "M4", height = 15 }
aliases = ["adhesive PCB spacer M4 15 mm", "PCB standoff M4 x 15", "board support M4 15 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "adhesive-M4-20"
title = "Adhesive-backed PCB support M4, 20 mm (simplified)"
params = { kind = "adhesive", size = "M4", height = 20 }
aliases = ["adhesive PCB spacer M4 20 mm", "PCB standoff M4 x 20", "board support M4 20 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "adhesive-M4-25"
title = "Adhesive-backed PCB support M4, 25 mm (simplified)"
params = { kind = "adhesive", size = "M4", height = 25 }
aliases = ["adhesive PCB spacer M4 25 mm", "PCB standoff M4 x 25", "board support M4 25 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "swage-M2-5"
title = "Swage PCB standoff M2, 5 mm (simplified)"
params = { kind = "swage", size = "M2", height = 5 }
aliases = ["swage PCB spacer M2 5 mm", "PCB standoff M2 x 5", "board support M2 5 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "swage-M2-6"
title = "Swage PCB standoff M2, 6 mm (simplified)"
params = { kind = "swage", size = "M2", height = 6 }
aliases = ["swage PCB spacer M2 6 mm", "PCB standoff M2 x 6", "board support M2 6 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "swage-M2-8"
title = "Swage PCB standoff M2, 8 mm (simplified)"
params = { kind = "swage", size = "M2", height = 8 }
aliases = ["swage PCB spacer M2 8 mm", "PCB standoff M2 x 8", "board support M2 8 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "swage-M2-10"
title = "Swage PCB standoff M2, 10 mm (simplified)"
params = { kind = "swage", size = "M2", height = 10 }
aliases = ["swage PCB spacer M2 10 mm", "PCB standoff M2 x 10", "board support M2 10 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "swage-M2-12"
title = "Swage PCB standoff M2, 12 mm (simplified)"
params = { kind = "swage", size = "M2", height = 12 }
aliases = ["swage PCB spacer M2 12 mm", "PCB standoff M2 x 12", "board support M2 12 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "swage-M2-15"
title = "Swage PCB standoff M2, 15 mm (simplified)"
params = { kind = "swage", size = "M2", height = 15 }
aliases = ["swage PCB spacer M2 15 mm", "PCB standoff M2 x 15", "board support M2 15 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "swage-M2-20"
title = "Swage PCB standoff M2, 20 mm (simplified)"
params = { kind = "swage", size = "M2", height = 20 }
aliases = ["swage PCB spacer M2 20 mm", "PCB standoff M2 x 20", "board support M2 20 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "swage-M2-25"
title = "Swage PCB standoff M2, 25 mm (simplified)"
params = { kind = "swage", size = "M2", height = 25 }
aliases = ["swage PCB spacer M2 25 mm", "PCB standoff M2 x 25", "board support M2 25 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "swage-M2.5-5"
title = "Swage PCB standoff M2.5, 5 mm (simplified)"
params = { kind = "swage", size = "M2.5", height = 5 }
aliases = ["swage PCB spacer M2.5 5 mm", "PCB standoff M2.5 x 5", "board support M2.5 5 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "swage-M2.5-6"
title = "Swage PCB standoff M2.5, 6 mm (simplified)"
params = { kind = "swage", size = "M2.5", height = 6 }
aliases = ["swage PCB spacer M2.5 6 mm", "PCB standoff M2.5 x 6", "board support M2.5 6 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "swage-M2.5-8"
title = "Swage PCB standoff M2.5, 8 mm (simplified)"
params = { kind = "swage", size = "M2.5", height = 8 }
aliases = ["swage PCB spacer M2.5 8 mm", "PCB standoff M2.5 x 8", "board support M2.5 8 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "swage-M2.5-10"
title = "Swage PCB standoff M2.5, 10 mm (simplified)"
params = { kind = "swage", size = "M2.5", height = 10 }
aliases = ["swage PCB spacer M2.5 10 mm", "PCB standoff M2.5 x 10", "board support M2.5 10 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "swage-M2.5-12"
title = "Swage PCB standoff M2.5, 12 mm (simplified)"
params = { kind = "swage", size = "M2.5", height = 12 }
aliases = ["swage PCB spacer M2.5 12 mm", "PCB standoff M2.5 x 12", "board support M2.5 12 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "swage-M2.5-15"
title = "Swage PCB standoff M2.5, 15 mm (simplified)"
params = { kind = "swage", size = "M2.5", height = 15 }
aliases = ["swage PCB spacer M2.5 15 mm", "PCB standoff M2.5 x 15", "board support M2.5 15 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "swage-M2.5-20"
title = "Swage PCB standoff M2.5, 20 mm (simplified)"
params = { kind = "swage", size = "M2.5", height = 20 }
aliases = ["swage PCB spacer M2.5 20 mm", "PCB standoff M2.5 x 20", "board support M2.5 20 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "swage-M2.5-25"
title = "Swage PCB standoff M2.5, 25 mm (simplified)"
params = { kind = "swage", size = "M2.5", height = 25 }
aliases = ["swage PCB spacer M2.5 25 mm", "PCB standoff M2.5 x 25", "board support M2.5 25 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "swage-M3-5"
title = "Swage PCB standoff M3, 5 mm (simplified)"
params = { kind = "swage", size = "M3", height = 5 }
aliases = ["swage PCB spacer M3 5 mm", "PCB standoff M3 x 5", "board support M3 5 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "swage-M3-6"
title = "Swage PCB standoff M3, 6 mm (simplified)"
params = { kind = "swage", size = "M3", height = 6 }
aliases = ["swage PCB spacer M3 6 mm", "PCB standoff M3 x 6", "board support M3 6 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "swage-M3-8"
title = "Swage PCB standoff M3, 8 mm (simplified)"
params = { kind = "swage", size = "M3", height = 8 }
aliases = ["swage PCB spacer M3 8 mm", "PCB standoff M3 x 8", "board support M3 8 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "swage-M3-10"
title = "Swage PCB standoff M3, 10 mm (simplified)"
params = { kind = "swage", size = "M3", height = 10 }
aliases = ["swage PCB spacer M3 10 mm", "PCB standoff M3 x 10", "board support M3 10 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "swage-M3-12"
title = "Swage PCB standoff M3, 12 mm (simplified)"
params = { kind = "swage", size = "M3", height = 12 }
aliases = ["swage PCB spacer M3 12 mm", "PCB standoff M3 x 12", "board support M3 12 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "swage-M3-15"
title = "Swage PCB standoff M3, 15 mm (simplified)"
params = { kind = "swage", size = "M3", height = 15 }
aliases = ["swage PCB spacer M3 15 mm", "PCB standoff M3 x 15", "board support M3 15 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "swage-M3-20"
title = "Swage PCB standoff M3, 20 mm (simplified)"
params = { kind = "swage", size = "M3", height = 20 }
aliases = ["swage PCB spacer M3 20 mm", "PCB standoff M3 x 20", "board support M3 20 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "swage-M3-25"
title = "Swage PCB standoff M3, 25 mm (simplified)"
params = { kind = "swage", size = "M3", height = 25 }
aliases = ["swage PCB spacer M3 25 mm", "PCB standoff M3 x 25", "board support M3 25 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "swage-M4-5"
title = "Swage PCB standoff M4, 5 mm (simplified)"
params = { kind = "swage", size = "M4", height = 5 }
aliases = ["swage PCB spacer M4 5 mm", "PCB standoff M4 x 5", "board support M4 5 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "swage-M4-6"
title = "Swage PCB standoff M4, 6 mm (simplified)"
params = { kind = "swage", size = "M4", height = 6 }
aliases = ["swage PCB spacer M4 6 mm", "PCB standoff M4 x 6", "board support M4 6 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "swage-M4-8"
title = "Swage PCB standoff M4, 8 mm (simplified)"
params = { kind = "swage", size = "M4", height = 8 }
aliases = ["swage PCB spacer M4 8 mm", "PCB standoff M4 x 8", "board support M4 8 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "swage-M4-10"
title = "Swage PCB standoff M4, 10 mm (simplified)"
params = { kind = "swage", size = "M4", height = 10 }
aliases = ["swage PCB spacer M4 10 mm", "PCB standoff M4 x 10", "board support M4 10 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "swage-M4-12"
title = "Swage PCB standoff M4, 12 mm (simplified)"
params = { kind = "swage", size = "M4", height = 12 }
aliases = ["swage PCB spacer M4 12 mm", "PCB standoff M4 x 12", "board support M4 12 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "swage-M4-15"
title = "Swage PCB standoff M4, 15 mm (simplified)"
params = { kind = "swage", size = "M4", height = 15 }
aliases = ["swage PCB spacer M4 15 mm", "PCB standoff M4 x 15", "board support M4 15 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "swage-M4-20"
title = "Swage PCB standoff M4, 20 mm (simplified)"
params = { kind = "swage", size = "M4", height = 20 }
aliases = ["swage PCB spacer M4 20 mm", "PCB standoff M4 x 20", "board support M4 20 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "swage-M4-25"
title = "Swage PCB standoff M4, 25 mm (simplified)"
params = { kind = "swage", size = "M4", height = 25 }
aliases = ["swage PCB spacer M4 25 mm", "PCB standoff M4 x 25", "board support M4 25 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "press-fit-M2-5"
title = "Press-fit PCB standoff M2, 5 mm (simplified)"
params = { kind = "press-fit", size = "M2", height = 5 }
aliases = ["press-fit PCB spacer M2 5 mm", "PCB standoff M2 x 5", "board support M2 5 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "press-fit-M2-6"
title = "Press-fit PCB standoff M2, 6 mm (simplified)"
params = { kind = "press-fit", size = "M2", height = 6 }
aliases = ["press-fit PCB spacer M2 6 mm", "PCB standoff M2 x 6", "board support M2 6 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "press-fit-M2-8"
title = "Press-fit PCB standoff M2, 8 mm (simplified)"
params = { kind = "press-fit", size = "M2", height = 8 }
aliases = ["press-fit PCB spacer M2 8 mm", "PCB standoff M2 x 8", "board support M2 8 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "press-fit-M2-10"
title = "Press-fit PCB standoff M2, 10 mm (simplified)"
params = { kind = "press-fit", size = "M2", height = 10 }
aliases = ["press-fit PCB spacer M2 10 mm", "PCB standoff M2 x 10", "board support M2 10 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "press-fit-M2-12"
title = "Press-fit PCB standoff M2, 12 mm (simplified)"
params = { kind = "press-fit", size = "M2", height = 12 }
aliases = ["press-fit PCB spacer M2 12 mm", "PCB standoff M2 x 12", "board support M2 12 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "press-fit-M2-15"
title = "Press-fit PCB standoff M2, 15 mm (simplified)"
params = { kind = "press-fit", size = "M2", height = 15 }
aliases = ["press-fit PCB spacer M2 15 mm", "PCB standoff M2 x 15", "board support M2 15 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "press-fit-M2-20"
title = "Press-fit PCB standoff M2, 20 mm (simplified)"
params = { kind = "press-fit", size = "M2", height = 20 }
aliases = ["press-fit PCB spacer M2 20 mm", "PCB standoff M2 x 20", "board support M2 20 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "press-fit-M2-25"
title = "Press-fit PCB standoff M2, 25 mm (simplified)"
params = { kind = "press-fit", size = "M2", height = 25 }
aliases = ["press-fit PCB spacer M2 25 mm", "PCB standoff M2 x 25", "board support M2 25 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "press-fit-M2.5-5"
title = "Press-fit PCB standoff M2.5, 5 mm (simplified)"
params = { kind = "press-fit", size = "M2.5", height = 5 }
aliases = ["press-fit PCB spacer M2.5 5 mm", "PCB standoff M2.5 x 5", "board support M2.5 5 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "press-fit-M2.5-6"
title = "Press-fit PCB standoff M2.5, 6 mm (simplified)"
params = { kind = "press-fit", size = "M2.5", height = 6 }
aliases = ["press-fit PCB spacer M2.5 6 mm", "PCB standoff M2.5 x 6", "board support M2.5 6 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "press-fit-M2.5-8"
title = "Press-fit PCB standoff M2.5, 8 mm (simplified)"
params = { kind = "press-fit", size = "M2.5", height = 8 }
aliases = ["press-fit PCB spacer M2.5 8 mm", "PCB standoff M2.5 x 8", "board support M2.5 8 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "press-fit-M2.5-10"
title = "Press-fit PCB standoff M2.5, 10 mm (simplified)"
params = { kind = "press-fit", size = "M2.5", height = 10 }
aliases = ["press-fit PCB spacer M2.5 10 mm", "PCB standoff M2.5 x 10", "board support M2.5 10 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "press-fit-M2.5-12"
title = "Press-fit PCB standoff M2.5, 12 mm (simplified)"
params = { kind = "press-fit", size = "M2.5", height = 12 }
aliases = ["press-fit PCB spacer M2.5 12 mm", "PCB standoff M2.5 x 12", "board support M2.5 12 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "press-fit-M2.5-15"
title = "Press-fit PCB standoff M2.5, 15 mm (simplified)"
params = { kind = "press-fit", size = "M2.5", height = 15 }
aliases = ["press-fit PCB spacer M2.5 15 mm", "PCB standoff M2.5 x 15", "board support M2.5 15 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "press-fit-M2.5-20"
title = "Press-fit PCB standoff M2.5, 20 mm (simplified)"
params = { kind = "press-fit", size = "M2.5", height = 20 }
aliases = ["press-fit PCB spacer M2.5 20 mm", "PCB standoff M2.5 x 20", "board support M2.5 20 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "press-fit-M2.5-25"
title = "Press-fit PCB standoff M2.5, 25 mm (simplified)"
params = { kind = "press-fit", size = "M2.5", height = 25 }
aliases = ["press-fit PCB spacer M2.5 25 mm", "PCB standoff M2.5 x 25", "board support M2.5 25 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "press-fit-M3-5"
title = "Press-fit PCB standoff M3, 5 mm (simplified)"
params = { kind = "press-fit", size = "M3", height = 5 }
aliases = ["press-fit PCB spacer M3 5 mm", "PCB standoff M3 x 5", "board support M3 5 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "press-fit-M3-6"
title = "Press-fit PCB standoff M3, 6 mm (simplified)"
params = { kind = "press-fit", size = "M3", height = 6 }
aliases = ["press-fit PCB spacer M3 6 mm", "PCB standoff M3 x 6", "board support M3 6 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "press-fit-M3-8"
title = "Press-fit PCB standoff M3, 8 mm (simplified)"
params = { kind = "press-fit", size = "M3", height = 8 }
aliases = ["press-fit PCB spacer M3 8 mm", "PCB standoff M3 x 8", "board support M3 8 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "press-fit-M3-10"
title = "Press-fit PCB standoff M3, 10 mm (simplified)"
params = { kind = "press-fit", size = "M3", height = 10 }
aliases = ["press-fit PCB spacer M3 10 mm", "PCB standoff M3 x 10", "board support M3 10 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "press-fit-M3-12"
title = "Press-fit PCB standoff M3, 12 mm (simplified)"
params = { kind = "press-fit", size = "M3", height = 12 }
aliases = ["press-fit PCB spacer M3 12 mm", "PCB standoff M3 x 12", "board support M3 12 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "press-fit-M3-15"
title = "Press-fit PCB standoff M3, 15 mm (simplified)"
params = { kind = "press-fit", size = "M3", height = 15 }
aliases = ["press-fit PCB spacer M3 15 mm", "PCB standoff M3 x 15", "board support M3 15 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "press-fit-M3-20"
title = "Press-fit PCB standoff M3, 20 mm (simplified)"
params = { kind = "press-fit", size = "M3", height = 20 }
aliases = ["press-fit PCB spacer M3 20 mm", "PCB standoff M3 x 20", "board support M3 20 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "press-fit-M3-25"
title = "Press-fit PCB standoff M3, 25 mm (simplified)"
params = { kind = "press-fit", size = "M3", height = 25 }
aliases = ["press-fit PCB spacer M3 25 mm", "PCB standoff M3 x 25", "board support M3 25 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "press-fit-M4-5"
title = "Press-fit PCB standoff M4, 5 mm (simplified)"
params = { kind = "press-fit", size = "M4", height = 5 }
aliases = ["press-fit PCB spacer M4 5 mm", "PCB standoff M4 x 5", "board support M4 5 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "press-fit-M4-6"
title = "Press-fit PCB standoff M4, 6 mm (simplified)"
params = { kind = "press-fit", size = "M4", height = 6 }
aliases = ["press-fit PCB spacer M4 6 mm", "PCB standoff M4 x 6", "board support M4 6 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "press-fit-M4-8"
title = "Press-fit PCB standoff M4, 8 mm (simplified)"
params = { kind = "press-fit", size = "M4", height = 8 }
aliases = ["press-fit PCB spacer M4 8 mm", "PCB standoff M4 x 8", "board support M4 8 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "press-fit-M4-10"
title = "Press-fit PCB standoff M4, 10 mm (simplified)"
params = { kind = "press-fit", size = "M4", height = 10 }
aliases = ["press-fit PCB spacer M4 10 mm", "PCB standoff M4 x 10", "board support M4 10 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "press-fit-M4-12"
title = "Press-fit PCB standoff M4, 12 mm (simplified)"
params = { kind = "press-fit", size = "M4", height = 12 }
aliases = ["press-fit PCB spacer M4 12 mm", "PCB standoff M4 x 12", "board support M4 12 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "press-fit-M4-15"
title = "Press-fit PCB standoff M4, 15 mm (simplified)"
params = { kind = "press-fit", size = "M4", height = 15 }
aliases = ["press-fit PCB spacer M4 15 mm", "PCB standoff M4 x 15", "board support M4 15 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "press-fit-M4-20"
title = "Press-fit PCB standoff M4, 20 mm (simplified)"
params = { kind = "press-fit", size = "M4", height = 20 }
aliases = ["press-fit PCB spacer M4 20 mm", "PCB standoff M4 x 20", "board support M4 20 mm"]
standard = "step.parts PCB support model"

[[presets]]
id = "press-fit-M4-25"
title = "Press-fit PCB standoff M4, 25 mm (simplified)"
params = { kind = "press-fit", size = "M4", height = 25 }
aliases = ["press-fit PCB spacer M4 25 mm", "PCB standoff M4 x 25", "board support M4 25 mm"]
standard = "step.parts PCB support model"