"""Through-hole PCB relay: Omron G2RL-2, G5LE-1, G5NB, G5V-1, G5V-2, G6A, G6AK, G6E, G6EK, G6H-2, G6K-2P and G6S-2; Finder 30.22,
32.21, 34.51, 36.11 and 40.31/51/52/61; Schrack (TE) RT1, RT2 and RYII; Tianbo HJR-4102; Hongfa HF115F 2 pole; Sanyou SRD. A closed case
on the XY plane with the pins down through the board. Pin 1 is at the origin; the pins are placed as the maker's bottom-view PCB layout
draws them, seen from above (the layout turned over about its horizontal axis): along it to +X, its next row towards +Y. Dimensions from
the makers' data sheets in the README."""
from steve import Model

kind = "G6A"  # Relay type

# kind: (case length along X, width along Y, height above the board; solder pin length below the board, pin across X, pin across Y;
# pin 1 from the case's -X end, from its -Y side; pins (x, y) from pin 1, or (x, y, across X, across Y) for a pin of another section).
# Omron: the case sizes are the data sheets' average values.
# Omron G2RL, Cat. No. J117-E1-17, Dimensions p. 6, G2RL-2: 29 max. (28.8 average) x 12.7 max. (12.5) x 15.7 max. (15.5), terminals 3.5 long,
#   0.5 x 0.8; PCB mounting holes (bottom view): columns at 0, 15, 20, 25 (20 from pin 1 to the third, 5 apart), rows 7.5 apart, (2.3) from
#   the case end and (2.5) from its side. Weight approx. 12 g (p. 2).
# Omron G5V-1, Cat. No. K048-E1-07, Dimensions p. 4: 12.5 max. (12.3) x 7.5 max. (7.3) x 10 max. (9.9), terminals 3.5 long, 0.5 x 0.3;
#   holes at 0, 2.54 and 10.16, rows 5.08 apart, (1.07) and (1.11) from the case. Weight approx. 2 g.
# Omron G5V-2, Cat. No. K046-E1-06, Dimensions p. 4: 20.5 max. (20.3) x 10.1 max. (9.9) x 11.5 max. (11.4), terminals 3.5 long,
#   0.5 x 0.3; holes at 0, 7.62, 12.7, 17.78, rows 7.62 apart, (1.3) and (1.2) from the case. Weight approx. 5 g.
# Omron G6A, Cat. No. K020-E1-15, Dimensions p. 8: 20.2 max. (20) x 10.1 max. (9.9) x 8.4 max. (8.2), terminals 3.16 long, 0.6 x 0.3;
#   G6A-274P: holes at 0, 7.62, 12.7, 17.78, rows 7.62 apart, (1.2) from the case; G6AK-274P (double-winding latching): also at 2.54,
#   ten holes. Weight approx. 3.5 g (p. 2).
# Omron G5LE, Cat. No. K100-E1-08 (Chip and Dip's copy), Dimensions p. 3, G5LE-1 and -1A: 22.5 max. (21.6) x 16.5 max. (15.6) x 19.0 max.
#   (18.56), terminals 3.5; terminal 1 (common) 1.2 across the case and 0.2 along it, the others 1 along and 0.4 across; PCB mounting holes
#   (bottom view): 1 on the centre line (2.55) from the case end, the coil terminals 2 and 5 2 on and the contacts 3 and 4 12.2 further,
#   6 either side, (2.25) from the sides and (5.75) from the far end; the bracketed distances add up to the maximum case, so the average
#   case is centred on the same holes (2.1 and 7.8 from pin 1). Weight approx. 12 g (p. 2). 1A leaves out 4.
# Omron G5NB-E, Omron catalogue 2008 (Cat. No. J143-E2-02A-X, static.datasheets.com copy), p. 52, G5NB-1A-E: 20.5 max. (20.4) x
#   7.2 max. (7.0) x 15.3 max. (15.0), terminals 3.4; coil terminals 1 and 4 0.4 along the case, 4.7 apart; contacts 2 and 3 at 11.5 and
#   18.5 in 1's row, 0.27 and 0.33 along, 0.8 across; (1.05) and (1.15) from the case. Weight approx. 4 g (pp. 50-51). The coil terminals'
#   thickness across isn't given: 0.4, as drawn.
# Omron G6E, Omron catalogue 2008 (Cat. No. K024-E2-08A-X, static.datasheets.com copy), pp. 192-193, G6E-134P and G6EK-134P: 16 max.
#   (15.9) x 10 max. (9.9) x 8 max. (7.9), terminals 3.5, 0.6 x 0.25; holes (bottom view): 1 and 6 12.7 apart, 12, 10 and 7 at 0, 5.08
#   and 12.7 in the row 7.62 across, (1.65) and (1.19) from the case; G6EK adds 3 at 5.08 in 1's row. Weight approx. 2.7 g (pp. 190-191).
# Omron G6H, Cat. No. K42-E1-5 (static.datasheets.com copy), Dimensions p. 6, G6H-2: 14.3 max. (14.1) x 9.3 max. (9.0) x 5.4 max.
#   (5.0), terminals 3.5, 0.5 x 0.25; ten holes, 1 to 5 and 10 to 6 2.54 apart, rows 7.62 apart, (1.92) and (0.69) from the case.
#   Weight approx. 1.5 g (p. 3).
# Omron G6K, Cat. No. JB301-E3-01 (3/05, static.datasheets.com copy), p. 512: G6K-2P: 10 x 6.5 x 5, terminals 3.5, 0.4 along the case;
#   eight holes, 1 to 4 and 8 to 5 2.54 apart, rows 5.08 apart, 1.19 and 0.71 from the case; G6K-2P-Y (3.2 mm coil-contact spacing):
#   1 to 4 at 0, 3.2, 5.4 and 7.6, 1.2 from the case end. The terminals' thickness across isn't given: 0.2, as drawn. No weight given.
# Omron G6S, Cat. No. K093-E1-13 (LCSC's copy), pp. 5-6: G6S-2 and G6SK-2: 14.8 x 7.3 x 9.2, terminals 2.95, 0.5 x 0.25; holes
#   (bottom view): 1, 3, 4, 5 at 0, 5.08, 7.62 and 10.16, 12, 10, 9, 8 in the row 5.08 across, (1.05) and (1.11) from the case; G6SK-2
#   adds 6 and 7 at 12.7. Weight approx. 2 g (p. 3).
# Finder: pin 1 is coil terminal A1. The rows are centred across the case (the sheets dimension the rows and the case width, not the gap).
# Finder 30 series, edition II-2026 (S30EN): 30.22, copper side view p. 3: A1, 11, 12, 14 at 0, 7.62, 12.7, 17.78, rows 7.62 apart, 14 is 1.3
#   from the case end; outline drawing p. 5: 20.2 x 10 x 10.9, pins 3.2, coil pins 0.4, contact pins 0.6 along the case, 0.4 across.
# Finder 32 series, edition XII-2025 (S32EN): 32.21-4000 and -4300, copper side view p. 3: A1, 11, 14 at 0, 10.16, 17.78, A2 and 12 7.62
#   across, 14 is 1.1 from the case end; outline drawing p. 5: 20.2 x 10.1 x 10.7, pins 3.5, coil pins 0.4 x 0.4, contact pins 0.8 x 0.3.
# Finder 34 series, edition II-2026 (S34EN): 34.51, copper side view p. 3: one row, A2, A1, 12, 11, 14 at 0, 3.75, 15, 20, 25, 1.3 from the
#   case side, 14 is 1.9 from the case end; outline drawing p. 9: 28 x 5 x 15, pins 3.5, coil pins 0.5 x 0.5, contact pins 1 x 0.4.
#   Flat pack version 34.51.7xxx.x019, p. 6: the case lies on the board (28 x 15, 5 high), the pins bent down at its long side, the pin row
#   15.4 from the far side, the pin ends 7.5 from the case's top face (2.5 below the board).
# Finder 36 series, edition II-2026 (S36EN): 36.11-4011, copper side view p. 3: A1 and A2 6 + 6 apart, 11 between them 2 to the side and
#   1.2 from the case end, 14 and 12 12.2 from A1 and A2 and 3.4 from the other end; outline drawing p. 5: 18.8 x 15.2 x 15.5, pins 3.5,
#   11 0.3 x 1.2, coil pins 0.5 and contact pins 1 along the case (their thickness across isn't given: 0.5, as drawn).
# Finder 40 series, edition VIII-2026 (S40EN): copper side views p. 3: A1, A2 7.5 apart, 2.5 from the case end; 40.31: 12, 14 at 16.5,
#   23.5 in A1's row, 11 at 20 in A2's; 40.51: 15, 25 and 20; 40.52 and 40.61: 15, 20, 25 in both rows. Outline drawing p. 10:
#   29 x 12.4 x 25.1, pins 0.4 along the case, 1 across, 3.5 (PCB relay, "-3.5" here) or 5.2 (PCB or socket) long.
# Schrack (TE Connectivity): pin 1 is coil terminal A1. "PCB layout / terminal assignment, bottom view on solder pins". The sheets don't dimension
#   the pins' section: 0.55 along the case and 1.0 (RT1, RT2) or 0.8 (RYII) across it, scaled from the outline drawings (line centres).
# Schrack RT1, datasheet 01-2020 Rev. 0120, p. 2 (layouts) and p. 3 (THT outline): 29.0 x 12.7 x 15.7, pins 3.6; rows 7.5 apart, 11 20.3 from A1
#   in A2's row, the case end 22.65 from 11; 12A 3.5 mm pinning (RT1 1x): 12 and 14 3.5 either side of 11, in A1's row; 12A 5 mm (RT2x): 5.04
#   either side; 16A 5 mm (RT3x): 12, 11, 14 in both rows. Form A (RTx3) leaves out 12. Weight 14 g (p. 2).
# Schrack RT2 (Asia/Pacific markets), datasheet 11-2020 Rev. 1120, p. 2: the RT1's case and pins; 8A 5 mm pinning, 12, 11, 14 and 22, 21, 24 at
#   15.26, 20.3, 25.34 (5.04 apart); 2 form A (RT44) leaves out 12 and 22. Weight 13 g.
# Schrack RY II, Datenblatt Rev. HC1, Ausgabe 2008/03, p. 2: 28.5 x 10.1 x 12.3, pins 3.2; 3.2 mm pinning (RY 21), A1 1.9 from the case end,
#   18.9 from A1 in A2's row, then 3.2 and 3.2 on, alternately in A1's and A2's rows; 5 mm pinning (RY 53, 1 Schliesser, and the 1 Oeffner on the
#   same layout), A1 3.25 from the end, 18.9 in A1's row and 18.9 + 5.04 in A2's. Rows three grid steps of 2.5 to 2.54 apart (7.62 here).
#   Weight 8 g (p. 2).
# Tianbo HJR-4102 (Ningbo Tianbo, TBO), data sheet "HJR4102" (Chip and Dip's copy, PDF of 2019-04), p. 3, overall and mounting dimensions:
#   15.7 x 10.4 x 11.7, pins 3.4; coil pins 0.3 square, 5 and 8 0.45 along the case, 6 and 7 0.4, all 0.3 across; holes: pin 1 and 12 (coil),
#   then 10.16 and 2.54 on (5 and 6; 8 and 7), rows 7.62 apart. Form C (Z) and form A (H, without 7). Weight approx. 3.5 g (p. 1).
#   The sheet doesn't place the pins in the case: the pattern is centred in it (1.5 from each end), as the side view draws it.
# Hongfa HF115F, data sheet 2025 Rev. 1.00 (source.hongfa.com HF115F_en.pdf), p. 221, outline, 5 mm pinning: 29 x 12.7 x 15.7, pins 3.6,
#   coil pins 0.5 x 0.5, contact pins 0.5 x 0.8 (0.8 across the case); p. 222, PCB layout (bottom view), 5 mm pinning, 2 pole, 8 A
#   (HF115F/xxx-2x-x-4): coil pins 2.6 from the case end, the contacts 20.16 from them and 5.04 either side, rows 7.56 apart; 2 form A (2H)
#   keeps 20.16 and 25.2, 2 form B (2D) 15.12 and 20.16. Weight approx. 13.5 g (p. 219).
# Sanyou SRD, data sheet version V3.2 (LCSC's copy, atta.szlcsc.com), p. 3, outline: 19.6 x 15.4 x 15.5, pins 3.5; bottom view: the
#   contacts 4.1 from the case end, 1 x 0.4; the coil 12.2 on, 0.55 square; the common 2.0 on and 1.3 from the other end, 0.3 x 1;
#   rows 6 + 6 from the centre line, which the common sits on. Pin 1 is the common (the sheet numbers no pins); the layout is turned
#   half a turn so that it's at the -X end. 1a (form A) keeps the contact on the -Y side, 1b (form B) the +Y one. Weight approx. 8.5 g (p. 1).
RELAYS = {
    "G2RL-2": (28.8, 12.5, 15.5, 3.5, 0.5, 0.8, 2.3, 2.5, ((0, 0), (15, 0), (20, 0), (25, 0), (0, 7.5), (15, 7.5), (20, 7.5), (25, 7.5))),
    "G5V-1": (12.3, 7.3, 9.9, 3.5, 0.5, 0.3, 1.07, 1.11, ((0, 0), (2.54, 0), (10.16, 0), (0, 5.08), (2.54, 5.08), (10.16, 5.08))),
    "G5V-2": (20.3, 9.9, 11.4, 3.5, 0.5, 0.3, 1.3, 1.2,
              ((0, 0), (7.62, 0), (12.7, 0), (17.78, 0), (0, 7.62), (7.62, 7.62), (12.7, 7.62), (17.78, 7.62))),
    "G6A": (20.0, 9.9, 8.2, 3.16, 0.6, 0.3, 1.2, 1.2,
            ((0, 0), (7.62, 0), (12.7, 0), (17.78, 0), (0, 7.62), (7.62, 7.62), (12.7, 7.62), (17.78, 7.62))),
    "G5LE-1": (21.6, 15.6, 18.56, 3.5, 1.0, 0.4, 2.1, 7.8, ((0, 0, 0.2, 1.2), (2, -6), (14.2, -6), (14.2, 6), (2, 6))),
    "G5LE-1A": (21.6, 15.6, 18.56, 3.5, 1.0, 0.4, 2.1, 7.8, ((0, 0, 0.2, 1.2), (2, -6), (14.2, -6), (2, 6))),
    "G5NB-1A-E": (20.4, 7.0, 15.0, 3.4, 0.4, 0.4, 1.05, 1.15, ((0, 0), (11.5, 0, 0.27, 0.8), (18.5, 0, 0.33, 0.8), (0, 4.7))),
    "G6E-134P": (15.9, 9.9, 7.9, 3.5, 0.6, 0.25, 1.65, 1.19, ((0, 0), (12.7, 0), (12.7, 7.62), (5.08, 7.62), (0, 7.62))),
    "G6EK-134P": (15.9, 9.9, 7.9, 3.5, 0.6, 0.25, 1.65, 1.19, ((0, 0), (5.08, 0), (12.7, 0), (12.7, 7.62), (5.08, 7.62), (0, 7.62))),
    "G6H-2": (14.1, 9.0, 5.0, 3.5, 0.5, 0.25, 1.92, 0.69, ((0, 0), (2.54, 0), (5.08, 0), (7.62, 0), (10.16, 0), (10.16, 7.62), (7.62, 7.62),
                                                          (5.08, 7.62), (2.54, 7.62), (0, 7.62))),
    "G6K-2P": (10.0, 6.5, 5.0, 3.5, 0.4, 0.2, 1.19, 0.71, ((0, 0), (2.54, 0), (5.08, 0), (7.62, 0), (7.62, 5.08), (5.08, 5.08), (2.54, 5.08),
                                                           (0, 5.08))),
    "G6K-2P-Y": (10.0, 6.5, 5.0, 3.5, 0.4, 0.2, 1.2, 0.71, ((0, 0), (3.2, 0), (5.4, 0), (7.6, 0), (7.6, 5.08), (5.4, 5.08), (3.2, 5.08), (0, 5.08))),
    "G6S-2": (14.8, 7.3, 9.2, 2.95, 0.5, 0.25, 1.05, 1.11, ((0, 0), (5.08, 0), (7.62, 0), (10.16, 0), (10.16, 5.08), (7.62, 5.08), (5.08, 5.08),
                                                            (0, 5.08))),
    "G6SK-2": (14.8, 7.3, 9.2, 2.95, 0.5, 0.25, 1.05, 1.11, ((0, 0), (5.08, 0), (7.62, 0), (10.16, 0), (12.7, 0), (12.7, 5.08), (10.16, 5.08),
                                                             (7.62, 5.08), (5.08, 5.08), (0, 5.08))),
    "G6AK": (20.0, 9.9, 8.2, 3.16, 0.6, 0.3, 1.2, 1.2,
             ((0, 0), (2.54, 0), (7.62, 0), (12.7, 0), (17.78, 0), (0, 7.62), (2.54, 7.62), (7.62, 7.62), (12.7, 7.62), (17.78, 7.62))),
    "30.22": (20.2, 10.0, 10.9, 3.2, 0.6, 0.4, 1.12, 1.19,
              ((0, 0, 0.4, 0.4), (7.62, 0), (12.7, 0), (17.78, 0), (0, 7.62, 0.4, 0.4), (7.62, 7.62), (12.7, 7.62), (17.78, 7.62))),
    "32.21-4000": (20.2, 10.1, 10.7, 3.5, 0.8, 0.3, 1.32, 1.24,
                   ((0, 0, 0.4, 0.4), (10.16, 0), (17.78, 0), (0, 7.62, 0.4, 0.4), (17.78, 7.62))),
    "32.21-4300": (20.2, 10.1, 10.7, 3.5, 0.8, 0.3, 1.32, 1.24, ((0, 0, 0.4, 0.4), (10.16, 0), (17.78, 0), (0, 7.62, 0.4, 0.4))),
    "34.51": (28.0, 5.0, 15.0, 3.5, 1.0, 0.4, 4.85, 3.7, ((0, 0, 0.5, 0.5), (-3.75, 0, 0.5, 0.5), (11.25, 0), (16.25, 0), (21.25, 0))),
    "34.51-flat": (28.0, 15.0, 5.0, 2.5, 1.0, 0.4, 4.85, -0.4, ((0, 0, 0.5, 0.5), (-3.75, 0, 0.5, 0.5), (11.25, 0), (16.25, 0), (21.25, 0))),
    "36.11": (18.8, 15.2, 15.5, 3.5, 1.0, 0.5, 3.2, 1.6, ((0, 0, 0.5, 0.5), (12.2, 0), (-2, 6, 0.3, 1.2), (0, 12, 0.5, 0.5), (12.2, 12))),
    "40.31": (29.0, 12.4, 25.1, 5.2, 0.4, 1.0, 2.5, 2.45, ((0, 0), (16.5, 0), (23.5, 0), (0, 7.5), (20, 7.5))),
    "40.31-3.5": (29.0, 12.4, 25.1, 3.5, 0.4, 1.0, 2.5, 2.45, ((0, 0), (16.5, 0), (23.5, 0), (0, 7.5), (20, 7.5))),
    "40.51": (29.0, 12.4, 25.1, 5.2, 0.4, 1.0, 2.5, 2.45, ((0, 0), (15, 0), (25, 0), (0, 7.5), (20, 7.5))),
    "40.51-3.5": (29.0, 12.4, 25.1, 3.5, 0.4, 1.0, 2.5, 2.45, ((0, 0), (15, 0), (25, 0), (0, 7.5), (20, 7.5))),
    "40.52": (29.0, 12.4, 25.1, 5.2, 0.4, 1.0, 2.5, 2.45, ((0, 0), (15, 0), (20, 0), (25, 0), (0, 7.5), (15, 7.5), (20, 7.5), (25, 7.5))),
    "40.61": (29.0, 12.4, 25.1, 5.2, 0.4, 1.0, 2.5, 2.45, ((0, 0), (15, 0), (20, 0), (25, 0), (0, 7.5), (15, 7.5), (20, 7.5), (25, 7.5))),
    "40.61-3.5": (29.0, 12.4, 25.1, 3.5, 0.4, 1.0, 2.5, 2.45,
                  ((0, 0), (15, 0), (20, 0), (25, 0), (0, 7.5), (15, 7.5), (20, 7.5), (25, 7.5))),
    "RT11": (29.0, 12.7, 15.7, 3.6, 0.55, 1.0, 2.35, 2.6, ((0, 0), (16.8, 0), (23.8, 0), (0, 7.5), (20.3, 7.5))),
    "RT13": (29.0, 12.7, 15.7, 3.6, 0.55, 1.0, 2.35, 2.6, ((0, 0), (23.8, 0), (0, 7.5), (20.3, 7.5))),
    "RT21": (29.0, 12.7, 15.7, 3.6, 0.55, 1.0, 2.35, 2.6, ((0, 0), (15.26, 0), (25.34, 0), (0, 7.5), (20.3, 7.5))),
    "RT23": (29.0, 12.7, 15.7, 3.6, 0.55, 1.0, 2.35, 2.6, ((0, 0), (25.34, 0), (0, 7.5), (20.3, 7.5))),
    "RT31": (29.0, 12.7, 15.7, 3.6, 0.55, 1.0, 2.35, 2.6,
             ((0, 0), (15.26, 0), (20.3, 0), (25.34, 0), (0, 7.5), (15.26, 7.5), (20.3, 7.5), (25.34, 7.5))),
    "RT33": (29.0, 12.7, 15.7, 3.6, 0.55, 1.0, 2.35, 2.6, ((0, 0), (20.3, 0), (25.34, 0), (0, 7.5), (20.3, 7.5), (25.34, 7.5))),
    "RT42": (29.0, 12.7, 15.7, 3.6, 0.55, 1.0, 2.35, 2.6,
             ((0, 0), (15.26, 0), (20.3, 0), (25.34, 0), (0, 7.5), (15.26, 7.5), (20.3, 7.5), (25.34, 7.5))),
    "RT44": (29.0, 12.7, 15.7, 3.6, 0.55, 1.0, 2.35, 2.6, ((0, 0), (20.3, 0), (25.34, 0), (0, 7.5), (20.3, 7.5), (25.34, 7.5))),
    "RY21": (28.5, 10.1, 12.3, 3.2, 0.55, 0.8, 1.9, 1.24, ((0, 0), (22.1, 0), (0, 7.62), (18.9, 7.62), (25.3, 7.62))),
    "RY53": (28.5, 10.1, 12.3, 3.2, 0.55, 0.8, 3.25, 1.24, ((0, 0), (18.9, 0), (0, 7.62), (23.94, 7.62))),
    "RY5-NC": (28.5, 10.1, 12.3, 3.2, 0.55, 0.8, 3.25, 1.24, ((0, 0), (18.9, 0), (0, 7.62), (23.94, 7.62))),
    "HJR-4102": (15.7, 10.4, 11.7, 3.4, 0.3, 0.3, 1.5, 1.39,
                 ((0, 0), (10.16, 0, 0.45, 0.3), (12.7, 0, 0.4, 0.3), (0, 7.62), (10.16, 7.62, 0.45, 0.3), (12.7, 7.62, 0.4, 0.3))),
    "HJR-4102-A": (15.7, 10.4, 11.7, 3.4, 0.3, 0.3, 1.5, 1.39,
                   ((0, 0), (10.16, 0, 0.45, 0.3), (12.7, 0, 0.4, 0.3), (0, 7.62), (10.16, 7.62, 0.45, 0.3))),
    "HF115F-2Z-4": (29.0, 12.7, 15.7, 3.6, 0.5, 0.8, 2.6, 2.57,
                    ((0, 0, 0.5, 0.5), (15.12, 0), (20.16, 0), (25.2, 0), (0, 7.56, 0.5, 0.5), (15.12, 7.56), (20.16, 7.56), (25.2, 7.56))),
    "HF115F-2H-4": (29.0, 12.7, 15.7, 3.6, 0.5, 0.8, 2.6, 2.57,
                    ((0, 0, 0.5, 0.5), (20.16, 0), (25.2, 0), (0, 7.56, 0.5, 0.5), (20.16, 7.56), (25.2, 7.56))),
    "HF115F-2D-4": (29.0, 12.7, 15.7, 3.6, 0.5, 0.8, 2.6, 2.57,
                    ((0, 0, 0.5, 0.5), (15.12, 0), (20.16, 0), (0, 7.56, 0.5, 0.5), (15.12, 7.56), (20.16, 7.56))),
    "SRD-1C": (19.6, 15.4, 15.5, 3.5, 1.0, 0.4, 1.3, 7.7, ((0, 0, 0.3, 1.0), (2.0, -6, 0.55, 0.55), (2.0, 6, 0.55, 0.55), (14.2, -6), (14.2, 6))),
    "SRD-1A": (19.6, 15.4, 15.5, 3.5, 1.0, 0.4, 1.3, 7.7, ((0, 0, 0.3, 1.0), (2.0, -6, 0.55, 0.55), (2.0, 6, 0.55, 0.55), (14.2, -6))),
    "SRD-1B": (19.6, 15.4, 15.5, 3.5, 1.0, 0.4, 1.3, 7.7, ((0, 0, 0.3, 1.0), (2.0, -6, 0.55, 0.55), (2.0, 6, 0.55, 0.55), (14.2, 6))),
}
# Relays lying on the board with their pins bent down at the case's -Y side: kind: height of the pins' bend above the board (Finder 34.51 flat
# pack: the pins leave the case 1.3 from its face, the standing version's 1.3 from the case side, p. 3).
FLAT = {"34.51-flat": 1.3}
# Case colours, as the makers' pictures show them (black when not listed).
COLOURS = {"30.22": "#e9e7e1", "32.21-4000": "#e9e7e1", "32.21-4300": "#e9e7e1", "36.11": "#e9e7e1", "40.31": "#3f7fc4", "40.31-3.5": "#3f7fc4",
           "40.51": "#3f7fc4", "40.51-3.5": "#3f7fc4", "40.52": "#3f7fc4", "40.61": "#3f7fc4", "40.61-3.5": "#3f7fc4",
           "RT11": "#c4482f", "RT13": "#c4482f", "RT21": "#c4482f", "RT23": "#c4482f", "RT31": "#c4482f", "RT33": "#c4482f",
           "RT42": "#d9d9d6", "RT44": "#d9d9d6", "RY21": "#e9e7e1", "RY53": "#e9e7e1", "RY5-NC": "#e9e7e1"}
# Proportions (the data sheets don't dimension the inside): the case is a cover WALL thick over a base plate as thick; the coil, core and contacts inside are one
# copper block filling FILL of the space inside the case, standing on its floor, so that the mass comes out near the data sheets' weights.
WALL = 0.5
FILL = 0.27
# Kinds whose block fills more or less, so that the mass comes out near the sheet's weight (G5LE 12 g, G5NB 4 g, G6H 1.5 g, HJR-4102 3.5 g,
# SRD 8.5 g).
FILLS = {"G5LE-1": 0.23, "G5LE-1A": 0.23, "G5NB-1A-E": 0.23, "G6H-2": 0.32,
         "HJR-4102": 0.22, "HJR-4102-A": 0.22, "SRD-1C": 0.22, "SRD-1A": 0.22, "SRD-1B": 0.22}

if kind not in RELAYS:
    raise ValueError(f"no relay {kind!r}: {', '.join(RELAYS)}")
length, width, height, pin_length, pin_x, pin_y, from_end, from_side, pins = RELAYS[kind]
# Pin 1's place in the case: the PCB layouts' distances from pin 1 to the case's end and side (Omron: the bracketed reference values, the
# far end taking what's left of the average case size).
x0 = -from_end
y0 = -from_side

model = Model()
# The case: a cover, open underneath, over a base plate WALL thick that closes it.
model.box("case", length, width, height, at=(x0 + length / 2, y0 + width / 2, height / 2), op="new", body="case_body", name="Cover")
inner = (length - 2 * WALL, width - 2 * WALL, height - 2 * WALL)
model.box("inside", inner[0], inner[1], height - WALL, at=(x0 + length / 2, y0 + width / 2, (height - WALL) / 2), op="cut", body="case_body",
          name="Inside")
model.box("base", inner[0], inner[1], WALL, at=(x0 + length / 2, y0 + width / 2, WALL / 2), op="new", body="base_body", name="Base")
scale = FILLS.get(kind, FILL) ** (1 / 3)
core = (inner[0] * scale, inner[1] * scale, inner[2] * scale)
model.box("coil", core[0], core[1], core[2], at=(x0 + length / 2, y0 + width / 2, WALL + core[2] / 2), op="new", body="coil_body",
          name="Coil and contacts")
bend = FLAT.get(kind)
pin_bodies = []
for i, pin in enumerate(pins):
    x, y = pin[0], pin[1]
    sx, sy = (pin[2], pin[3]) if len(pin) == 4 else (pin_x, pin_y)
    body = f"pin_{i + 1}_body"
    if bend is None:
        model.box(f"pin_{i + 1}", sx, sy, pin_length, at=(x, y, -pin_length / 2), op="new", body=body, name=f"Pin {i + 1}")
    else:
        # Bent pin: down through the board from the bend, and across to the case's side at the bend's height.
        top = bend + sy / 2
        model.box(f"pin_{i + 1}", sx, sy, pin_length + top, at=(x, y, (top - pin_length) / 2), op="new", body=body, name=f"Pin {i + 1}")
        model.box(f"pin_{i + 1}_leg", sx, y0 - y, sy, at=(x, (y0 + y) / 2, bend), op="join", body=body, name=f"Pin {i + 1} leg")
    pin_bodies.append(body)
# Materials, for looks and a rough mass (the data sheets name none): a plastic case (pa6) in the maker's colour, the inside copper, tin-plated pins.
model.material("pa6", bodies=["case_body", "base_body"], color=COLOURS.get(kind, "#1d1e20"))
model.material("copper", bodies=["coil_body"], color="#b87333")
model.material("copper", bodies=pin_bodies, color="#c9cbc8")
result = model.result()