name = "steve/inch-flat-washer"
version = "1.1.0"
runtime = "steve"
license = "MIT"
summary = "Plain washer, inch: ASME B18.21.1 / B18.22.1 Type A (SAE narrow N / USS wide W) and fender washers, #0 to 1/2 in."
description = """Type A plain washer of ASME B18.21.1-2009 (formerly B18.22.1-1965, same table), narrow (N, the "SAE" series) and \
wide (W, the "USS" series), for #0 to 1/2 in screws. A flat ring at the table's nominal inside diameter, outside diameter and thickness. \
Also fender washers (F, large outside diameter) for #0 to 1/2 in screws, measured from step.parts' published models (MIT): \
no standard covers fender washers.

It sits on the XY plane, centred on the origin (the model is in millimetres). Dimensions from the Type A preferred sizes table \
(see the README)."""
changes = "Fender washers (F) for #0 to 1/2 in screws added, measured from step.parts' published models (MIT); Type A sizes unchanged."
tags = ["fastener", "washer", "flat-washer", "plain-washer", "fender-washer", "sae", "uss", "asme-b18-22-1", "asme-b18-21-1", "inch"]

[parameters.size]
type = "choice"
default = "1/4 N"
choices = ["#0", "#2", "#4", "#6", "#8", "#10", "1/4 N", "1/4 W", "5/16 N", "5/16 W", "3/8 N", "3/8 W", "7/16 N", "7/16 W", "1/2 N", "1/2 W", "#0 F", "#2 F", "#4 F", "#6 F", "#8 F", "#10 F", "1/4 F", "5/16 F", "3/8 F", "1/2 F"]
label = "Size"
description = "Screw size and series: N narrow (SAE), W wide (USS), F fender."

[parameters.material]
type = "choice"
default = "steel"
choices = ["steel", "stainless-18-8", "stainless-316"]
label = "Material"
description = "steel: carbon steel, zinc plated; stainless-18-8 (304) or stainless-316."

[[presets]]
id = "no0"
title = "#0 plain washer"
params = { size = "#0" }
aliases = ["#0 SAE washer", "#0 flat washer", "#0 plain washer Type A", "ASME B18.21.1 #0 washer"]
standard = "ASME B18.22.1"

[[presets]]
id = "no2"
title = "#2 plain washer"
params = { size = "#2" }
aliases = ["#2 SAE washer", "#2 flat washer", "#2 plain washer Type A", "ASME B18.21.1 #2 washer"]
standard = "ASME B18.22.1"

[[presets]]
id = "no4"
title = "#4 plain washer"
params = { size = "#4" }
aliases = ["#4 SAE washer", "#4 flat washer", "#4 plain washer Type A", "ASME B18.21.1 #4 washer"]
standard = "ASME B18.22.1"

[[presets]]
id = "no6"
title = "#6 plain washer"
params = { size = "#6" }
aliases = ["#6 SAE washer", "#6 flat washer", "#6 plain washer Type A", "ASME B18.21.1 #6 washer"]
standard = "ASME B18.22.1"

[[presets]]
id = "no8"
title = "#8 plain washer"
params = { size = "#8" }
aliases = ["#8 SAE washer", "#8 flat washer", "#8 plain washer Type A", "ASME B18.21.1 #8 washer"]
standard = "ASME B18.22.1"

[[presets]]
id = "no10"
title = "#10 plain washer"
params = { size = "#10" }
aliases = ["#10 SAE washer", "#10 flat washer", "#10 plain washer Type A", "ASME B18.21.1 #10 washer", "#10 plain washer"]
standard = "ASME B18.22.1"

[[presets]]
id = "1-4-N"
title = "1/4 N narrow (SAE) plain washer"
params = { size = "1/4 N" }
aliases = ["1/4 SAE washer", "1/4 flat washer", "1/4 plain washer Type A", "ASME B18.21.1 1/4 washer", "1/4 N narrow (SAE) plain washer", "ANSI-ASME B18.22.1 SAE Std Plain Washer 1 4"]
standard = "ASME B18.22.1"

[[presets]]
id = "5-16-N"
title = "5/16 N narrow (SAE) plain washer"
params = { size = "5/16 N" }
aliases = ["5/16 SAE washer", "5/16 flat washer", "5/16 plain washer Type A", "ASME B18.21.1 5/16 washer", "5/16 N narrow (SAE) plain washer"]
standard = "ASME B18.22.1"

[[presets]]
id = "3-8-N"
title = "3/8 N narrow (SAE) plain washer"
params = { size = "3/8 N" }
aliases = ["3/8 SAE washer", "3/8 flat washer", "3/8 plain washer Type A", "ASME B18.21.1 3/8 washer", "3/8 N narrow (SAE) plain washer"]
standard = "ASME B18.22.1"

[[presets]]
id = "1-2-N"
title = "1/2 N narrow (SAE) plain washer"
params = { size = "1/2 N" }
aliases = ["1/2 SAE washer", "1/2 flat washer", "1/2 plain washer Type A", "ASME B18.21.1 1/2 washer", "1/2 N narrow (SAE) plain washer"]
standard = "ASME B18.22.1"

[[presets]]
id = "no0-fender"
title = "#0 fender washer"
params = { size = "#0 F" }
aliases = ["#0 fender washer", "#0 large OD washer", "#0 penny washer"]
standard = "step.parts fender washer model"

[[presets]]
id = "no2-fender"
title = "#2 fender washer"
params = { size = "#2 F" }
aliases = ["#2 fender washer", "#2 large OD washer", "#2 penny washer"]
standard = "step.parts fender washer model"

[[presets]]
id = "no4-fender"
title = "#4 fender washer"
params = { size = "#4 F" }
aliases = ["#4 fender washer", "#4 large OD washer", "#4 penny washer"]
standard = "step.parts fender washer model"

[[presets]]
id = "no6-fender"
title = "#6 fender washer"
params = { size = "#6 F" }
aliases = ["#6 fender washer", "#6 large OD washer", "#6 penny washer"]
standard = "step.parts fender washer model"

[[presets]]
id = "no8-fender"
title = "#8 fender washer"
params = { size = "#8 F" }
aliases = ["#8 fender washer", "#8 large OD washer", "#8 penny washer"]
standard = "step.parts fender washer model"

[[presets]]
id = "no10-fender"
title = "#10 fender washer"
params = { size = "#10 F" }
aliases = ["#10 fender washer", "#10 large OD washer", "#10 penny washer"]
standard = "step.parts fender washer model"

[[presets]]
id = "1-4-fender"
title = "1/4 fender washer"
params = { size = "1/4 F" }
aliases = ["1/4 fender washer", "1/4 large OD washer", "1/4 penny washer"]
standard = "step.parts fender washer model"

[[presets]]
id = "5-16-fender"
title = "5/16 fender washer"
params = { size = "5/16 F" }
aliases = ["5/16 fender washer", "5/16 large OD washer", "5/16 penny washer"]
standard = "step.parts fender washer model"

[[presets]]
id = "3-8-fender"
title = "3/8 fender washer"
params = { size = "3/8 F" }
aliases = ["3/8 fender washer", "3/8 large OD washer", "3/8 penny washer"]
standard = "step.parts fender washer model"

[[presets]]
id = "1-2-fender"
title = "1/2 fender washer"
params = { size = "1/2 F" }
aliases = ["1/2 fender washer", "1/2 large OD washer", "1/2 penny washer"]
standard = "step.parts fender washer model"