# SMD DIP switch

Surface-mount slide DIP switches in the Omron A6S and A6H sizes: the body, one actuator per pole in its window, and the gull-wing leads. The switch is centred on the origin with the seating plane on the XY plane, the poles in a row along X (pole 1 at -X) and the leads out to -Y and +Y. The actuators are drawn in the OFF position.

## Source

- A6S: Omron A6S-H datasheet, `https://omronfs.omron.com/en_US/ecb/products/pdf/en-a6s.pdf`, Dimensions (page 3): length A by number of poles (3.48 for 1 pole to 26.34 for 10), width 6.2, height 3, lead tip to tip 9.8, foot 0.7, lead width 0.5, pitch 2.54. Raised actuators stand 0.7 above the body and are 1 long.
- A6H: Omron A6H datasheet, `https://omronfs.omron.com/en_US/ecb/products/pdf/en-a6h.pdf`, Dimensions (page 2): length A for 2, 4, 6, 8 and 10 poles (3.77 to 13.93), width 4.5, height 1.45, lead tip to tip 6.7, foot 0.6, pitch 1.27.

Both pages give a ±0.4 mm general tolerance; the model uses the printed values.

Seal-tape models (A6S-□102-H, A6H-□102) have the same outline and are aliases of the standard presets.

**Proportions, for looks only:** lead thickness 0.2, the body's 0.15 mm height above the seating plane, A6H's lead width (0.4; the page prints only the 0.76 pad), and the actuator windows and knobs.

Other DIP switches aren't here yet; see `COVERAGE.md`.