name = "littletechbird/breaker-test-pins"
version = "1.0.0"
runtime = "steve"
license = "MIT"
summary = "Primary injection test pins (tulips) for molded case circuit breakers: hex lug end, tulip flare, rounded-square clamp end, four sizes."
description = """Copper alloy test pins for primary injection testing of molded case circuit breakers. The hex end goes \
through the breaker's plastic terminal cover into the set-screw box lug; the solid rounded-square end (no holes) takes \
the test cable's lug, clamped on with vise-grips. A tangent tulip flare joins the slim neck to the full body so there \
is no sharp shoulder at the fulcrum.

`size` picks one of four sizes covering 15 A to 1200 A frames (hex 5/16, 3/8, 1/2 and 5/8 in across flats). Material \
C18150 or C18200, TH04 temper, bare finish. Pin axis +x, hex tip at the origin. Dimensions are set in inches; the \
model is in mm."""
tags = ["electrical", "test-equipment", "circuit-breaker", "primary-injection", "copper", "busbar", "tooling", "machining"]

[parameters.size]
type = "choice"
default = "2"
choices = ["1", "2", "3", "4"]
label = "Size"
description = "1: 15-125 A frames, 5/16 hex x 2.50, 3/4 square. 2: 125-225 A, 3/8 hex x 3.25, 3/4 square. 3: 250 A, 1/2 hex x 3.75, 1 in square. 4: 400-1200 A, 5/8 hex x 4.00, 1 in square."

[parameters.hex_length]
type = "number"
default = 0
min = 0
max = 8
step = 0.05
unit = "in"
label = "Hex length override"
description = "0 uses the size default. Otherwise 1 to 8 in: lug depth plus terminal cover depth plus about 0.25 in."

[parameters.square_length]
type = "number"
default = 4.0
min = 1
max = 12
step = 0.25
unit = "in"
label = "Square clamp end length"
description = "Room for the cable lug pad and the vise-grip jaws."